c80dd34924
ramips: allow to build Seama firmware images with arbitrary size
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37707
2013-08-05 12:35:22 +00:00
169e184521
ramips: add Poray IP2202 support
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37640
2013-08-01 14:31:15 +00:00
ce4228b417
ramips: add Poray X8 support
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37639
2013-08-01 14:31:09 +00:00
54968110f1
ramips: add Poray X5/X6 Support
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37638
2013-08-01 14:31:04 +00:00
0dc3b44b0d
ramips: add Poray M4 4M/8M support
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37637
2013-08-01 14:30:58 +00:00
23d3b705df
ramips: add Poray M3 support
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37636
2013-08-01 14:30:53 +00:00
aaedf6c8c6
ramips: add basics for Poray devices
...
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.
Support for Poray devices was worked on by:
Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37635
2013-08-01 14:30:46 +00:00
046b282429
ralink: add mt7620a_mt7610e profile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37633
2013-08-01 14:30:33 +00:00
28d03a9983
kernel: update remaning platforms accidentally left out of r37617
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37619
2013-07-30 08:00:25 +00:00
c2600d13d1
ramips: fix indenting of spi partitions inside dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37609
2013-07-29 13:10:26 +00:00
73c4d73d6d
build: unify target independent optimization options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
8dd30fa775
ramips: add MPR-A1 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37568
2013-07-27 09:23:52 +00:00
13b7ab81cf
ralink: gpio driver should not set gpio to input when irq is querired
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37567
2013-07-27 09:23:45 +00:00
eb089abd28
ramips: add back dwc_otg driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37566
2013-07-27 09:23:40 +00:00
718b47f0b4
ramips: MPR-A2 should use memory auto detection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37565
2013-07-27 09:23:34 +00:00
115c6f85cf
ramips: enable usb phy support on rt5350
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37564
2013-07-27 09:23:29 +00:00
f4c4ca0b00
ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37563
2013-07-27 09:23:24 +00:00
c4413b6e08
ramips: unbreak asiarf dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37561
2013-07-26 15:19:19 +00:00
e9688455f6
kernel: update 3.10 to 3.10.3
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37546
2013-07-26 07:19:58 +00:00
04aaf7a03e
ramips: disable hg255d
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37532
2013-07-25 17:03:08 +00:00
7feebeb193
ramipe: disable HG255D support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37531
2013-07-25 16:55:48 +00:00
9b2c7be0c4
ramips: important patch for HG255D
...
r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!!
This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
SVN-Revision: 37530
2013-07-25 16:01:58 +00:00
3ad136d9e3
ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
...
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html
Signed-off-by Jon Smirl <jonsmirl@gmail.com>
SVN-Revision: 37521
2013-07-24 08:54:41 +00:00
3f3cac6136
ramips: fix HG255D VLAN initial detect issue
...
Signed-off-by: Leon Xu <ylxu72@gmail.com>
SVN-Revision: 37517
2013-07-23 13:07:00 +00:00
0cc1e2acb4
ramips: Add support for Huawei HG255D in trunk
...
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.
This patch is tested to work except trivial LED issues.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
SVN-Revision: 37505
2013-07-22 15:36:39 +00:00
ef944dcb85
kernel: update 3.10 to 3.10.2
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37502
2013-07-22 15:31:13 +00:00
8d0cd50f30
ralink: set remove dwc_otg from default packages and use dwc2 instead
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37499
2013-07-22 13:52:52 +00:00
ffe389c4c5
ralink: remove dwc_otg from modules.mk
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37498
2013-07-22 13:52:44 +00:00
5525b2136e
ralink: set v3.10 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37497
2013-07-22 13:52:32 +00:00
b1b4e7db13
kernel: move CONFIG_NET_IP_TUNNEL to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37465
2013-07-19 22:58:01 +00:00
8028fb8096
ramips: add sysupgarde support for wl-330n3g
...
https://dev.openwrt.org/ticket/13891
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37376
2013-07-17 09:44:57 +00:00
dd22304691
ramips: make the old dwc driver depend on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37357
2013-07-15 21:06:03 +00:00
072e1a254c
ramips: add v3.10 kernel config files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37356
2013-07-15 21:05:58 +00:00
cb6375c20a
ramips: fix ehci/ohci OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37354
2013-07-15 21:05:47 +00:00
12a099eb07
ramips: update dtsi files to work with dwc2 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37353
2013-07-15 21:05:42 +00:00
e8ebcffd02
ramips: add a explicit reset to dwc2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37352
2013-07-15 21:05:36 +00:00
bd78f2b56e
ramips: add a patch to make dwc2 work with boards that have an old bootloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37339
2013-07-15 11:34:13 +00:00
a0de18807b
ramips: add ralink v3.10 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37331
2013-07-15 10:06:55 +00:00
f7cf157712
ramips: disable ill_acc driver by default
...
The driver seems to be causoing boot rpoblems on some SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37314
2013-07-14 18:01:00 +00:00
89c0392736
ralink: drop v3.8 support
...
Signed-off-by: John Crispin <blogic@opewnrt.org>
SVN-Revision: 37311
2013-07-14 18:00:34 +00:00
e574f75d16
kernel: update to kernel 3.9.10 and refresh patches
...
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
099188695a
ralink: vlan offloading is causing problems. disable it
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37203
2013-07-08 16:34:52 +00:00
a6091a5c71
ralink: unbreak ralink i2c support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37202
2013-07-08 09:01:57 +00:00
a154693bab
ralink: add i2c-ralink kmod info
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37200
2013-07-08 09:01:47 +00:00
2da37a713e
ramips: fix RT-N13U gpio buttons
...
https://dev.openwrt.org/ticket/13795
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37163
2013-07-04 13:31:23 +00:00
5986a18c16
ramips: update wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37112
2013-06-30 21:03:48 +00:00
0d9f760f27
kernel: update linux 3.9 to 3.9.8
...
Includes memory allocation fixes as well as several networking fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
6875316646
ramips: unbreak initramfs generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37080
2013-06-29 08:41:03 +00:00
77b9fd52a6
ramips: fix ethernet driver
...
make sure the driver does not crash under load
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37058
2013-06-28 11:22:11 +00:00
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
36209234ab
ramips: fix rt2x00 ethernet compile bug
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37043
2013-06-27 16:45:40 +00:00
0d4e00c337
ramips: add missing symbols to rt288x config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37042
2013-06-27 16:45:26 +00:00
1706c8d29a
ramips: fix ethernet stability issue introduced by recent kernel upgrade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37041
2013-06-27 16:28:06 +00:00
5063f712a6
ramips: move ESW reset to preinit on RT305x/RT5350
...
RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet
interface, otherwise the driver will panic.
As we already init the ethernet in preinit we therefor need to reset the switch
before that.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 37027
2013-06-24 12:39:28 +00:00
d3723f93c6
ramips: make rt3883 usb work properly
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37024
2013-06-24 12:06:56 +00:00
dca18caa79
ramips: revert gpio regulator dts update
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37021
2013-06-24 11:09:50 +00:00
55fb6f3a05
ralink: update patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37016
2013-06-23 15:50:49 +00:00
67f5f188b1
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
e6ef318802
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
fc9532aeaa
ramips: add HAME MPR-A2 support
...
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
SVN-Revision: 36898
2013-06-10 08:24:56 +00:00
30786d2dd0
ramips: add support for belkin F7C027 wemo/homeautomatisation plug
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 36897
2013-06-10 08:24:50 +00:00
1756047518
ramips: set correct description for rt305x subtarget
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36775
2013-05-30 15:59:56 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
036fb79052
ramips: drop 3.7 support
...
Signed-off-by; John Crispin <blogic@openwrt.org>
SVN-Revision: 36572
2013-05-07 10:58:44 +00:00
16a17b318a
ramips: properly setup the FEATURES variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36571
2013-05-07 10:58:30 +00:00
bd6e12d904
ramips: fix memory detection rt5350
...
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 36568
2013-05-06 18:23:56 +00:00
899120ddef
ramips: enable dsp extensions for rt305x and rt3883
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36567
2013-05-06 16:45:59 +00:00
849ff98669
ramips: fix fypo in ethernet driver rt288x, rt3883
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36565
2013-05-06 16:45:43 +00:00
eddd7f5773
ramips: Update ARC Freestation profile
...
These devices are actually built around the 8devices Carambola dev board.
ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History
Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.
- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
actually reports itself as being an RT3350 while still having
RT3050F markings.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36564
2013-05-06 16:45:35 +00:00
4f1ff28f08
ramips: Support setting active_low in devicetree gpio-export
...
Support setting active_low in devicetree gpio-export.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36563
2013-05-06 16:45:27 +00:00
6af3b6721b
ralink: unbreak uart pinmux handling
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36562
2013-05-06 16:45:20 +00:00
7c04b3bd66
ramips: fix gpio base numbering
...
make banks 0 based to unbreak userland ABI
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36561
2013-05-06 16:45:12 +00:00
338ff04cab
ramips: add gpio base properties to dtsi files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36560
2013-05-06 16:45:04 +00:00
65760ede8b
ramips: unbreak rt2880 support
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36559
2013-05-06 16:44:56 +00:00
28bdb9efe9
ramips: fix DIR-602D1 flash size
...
Fix DIR-620D1 flash size.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36558
2013-05-06 16:44:47 +00:00
1c89a60431
ramips: unbreak gpio handling for uart mux group
...
this should fix the handling of corner cases
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36543
2013-05-04 11:36:51 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
eff12a630d
ramips: move dlink profile to correct sub folder - 2nd try
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489
2013-04-30 10:34:20 +00:00
1db4587bc7
ramips: move dlink profile to correct sub folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487
2013-04-30 08:24:26 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
c63bb1a18e
ramips: rt3883: fix build error
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36451
2013-04-26 16:55:28 +00:00
e141b73f9d
ramips: remove now unneeded user-space board detection
...
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36436
2013-04-25 19:03:05 +00:00
cf3885eb0f
ramips: introduce DTS for ALL5003
...
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36435
2013-04-25 19:03:01 +00:00
978567a89e
ramips: set preinit interface to eth0 by default.
...
This makes any ramips device accessible via ethernet in failsafe mode.
Based on: https://dev.openwrt.org/changeset/36322
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36434
2013-04-25 19:02:57 +00:00
7bfab6e308
ramips: Add Alpha ASL-26555 support.
...
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.
There are two versions (Chile 8MB and Spain 16MB).
Wiki: http://wiki.openwrt.org/toh/alpha/asl26555
Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36433
2013-04-25 19:02:53 +00:00
c7216d0cab
ramips: Add support of D-link DIR-620D1
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36432
2013-04-25 19:02:48 +00:00
deb3635923
ramips: sync kernel patches with the mips-next tree
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36431
2013-04-25 19:02:42 +00:00
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
e3003ea2a9
fix prepare_generic_squashfs
...
prepare_generic_squashfs was called twice on the generated images breaking mount_root
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36349
2013-04-17 11:54:09 +00:00
8001e6a689
fix rt305x gpio
...
https://dev.openwrt.org/ticket/13359
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36343
2013-04-16 06:58:18 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
d3a46c4b7f
update rt2880 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36327
2013-04-12 18:57:01 +00:00
92259c4803
fix up the rt2880 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36326
2013-04-12 18:56:53 +00:00
a6424245e6
fix RT-N15 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36325
2013-04-12 18:56:44 +00:00
7af1fa46ad
update rt2880.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36324
2013-04-12 18:56:36 +00:00
fb47fd0d6b
unbreak portmapping - typo fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36293
2013-04-09 14:39:01 +00:00
bc7b310959
move memory detect node to dtsi files
...
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
48feea4861
Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
e468abcae0
remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
82c3b7ce26
add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
f1e9d30ffc
add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
fcd962cc71
set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
130f67210a
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
a4a148f222
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
a9d977b2af
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
82705b30b3
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
909fabe574
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
78ee80f2e8
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
30e5bae84a
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
cd7ce5226d
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
4c85227cf4
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
97635d7a8e
ramips: add PCI node into RTN56U.dts
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
474264f64c
ramips: add PCI node for rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
6c8951313c
ramips: rt3883: enable PCI support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36262
2013-04-07 20:56:20 +00:00
b6b0a8fbee
ramips: fix RT3883 PCI driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36261
2013-04-07 20:56:18 +00:00
1700bf5b2e
ramips: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36260
2013-04-07 17:05:05 +00:00
6de8743e44
ramips: add missing cpu-feature-override.h files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36259
2013-04-07 17:05:04 +00:00
68875710fd
ramips: fix broken patch name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36258
2013-04-07 16:26:27 +00:00
16d0ce52b0
ramips: fix polarity of GPIO buttons for RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
d1f28c6d1f
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
0c3c29ca38
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
66fbe78a93
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
aedf05caa0
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
017aabe292
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
811f7f9f2d
fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
709b19ed9f
fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
85675528da
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
10d8e4b66c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
756b810178
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
1ef39b43dd
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
d57e662cda
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
4becd8590c
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
348640f4b3
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
d16de0b69f
fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
df7af06f1f
fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
e1a74d8ff7
fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
93899a1329
add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
7e54357bd5
fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
37401dca92
Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
910b705155
add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
c1710901c5
add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
f3643374c4
there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
99e0ff1123
make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
c8d5f5e0ef
add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
770b28f146
add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
2328e8389e
fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
94972a5268
fix rt3883 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36166
2013-04-03 09:59:37 +00:00
0716ae8abe
fix rt305x config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36165
2013-04-03 09:59:33 +00:00
dce4945972
mark rt288x broken until the test hardware arrives in the mail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36164
2013-04-03 09:59:16 +00:00
46f141637c
add patches for v3.8
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36163
2013-04-03 09:59:10 +00:00
4f86ea43ca
remove old ralink 3.8 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36162
2013-04-03 09:58:48 +00:00
d4db00205d
move files to files-3.7
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36161
2013-04-03 09:58:44 +00:00
86a691144b
add feature gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36160
2013-04-03 09:58:37 +00:00
07532dca7f
kernel: update linux 3.8 to 3.8.3
...
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
b22cbac68f
make sure errors get sent to /dev/null
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35988
2013-03-12 13:52:40 +00:00
fe3df4b593
ramips: add profile and build image for the Upvel UR-326N4G board
...
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35972
2013-03-11 21:02:45 +00:00
d543f4b771
ramips: add user-space support for the Upvel UR-326N4G board
...
[juhosg: fix mac address setup]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35971
2013-03-11 21:02:43 +00:00
3c2ef04a0e
ramips: add kernel support for the Upvel UR-326N4G board
...
[juhosg: add missing symbols to config-3.{7,8}]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35970
2013-03-11 21:02:40 +00:00
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
8798c73860
ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension
...
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.
The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.
[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35853
2013-03-03 12:47:31 +00:00
59ad675ef1
ramips: add user-space detection for ALL5002/ALL5003
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35852
2013-03-03 12:47:28 +00:00
50e51e5ecc
ramips: indicate support for ALL5003
...
add ALL5003 to board description in mach-all5002.c
adapt detection in user-space accordingly
(no functional changes)
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35851
2013-03-03 12:47:25 +00:00
367ab0a40f
ramips: enhance user-space board detection
...
Similar to ar71xx, detect only once and cache the strings in
/tmp/sysinfo/model and /tmp/sysinfo/boardname.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35850
2013-03-03 12:47:02 +00:00
1ba2272ca5
ramips: fix whitespace in /lib/ramips.sh
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35849
2013-03-03 12:46:08 +00:00
5412b6f32e
ramips: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35801
2013-02-25 21:28:42 +00:00
a08646642e
ramips: image: don't break make process if mkimage command fails
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35800
2013-02-25 21:28:40 +00:00
275db5b4c4
ramips: remove port_power_off field from ehci_platform_data
...
It is removed in 3.8. Also add a revert patch for 3.7.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35799
2013-02-25 21:28:38 +00:00
5e1d6ce077
ramips: remove __dev_{init,exit} annotations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35798
2013-02-25 21:28:34 +00:00
1cd62d06ca
ramips: print image build warnings/errors to stderr
...
Makes warnings/errors visible when building with V=w/V=1.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35721
2013-02-21 11:45:33 +00:00
90011a99f3
ramips: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35652
2013-02-18 09:56:29 +00:00
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
4375dae6d3
ramips: fix kmod-usb2 package name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35628
2013-02-16 17:26:52 +00:00
7fd8525853
ramips: use the new macaddr_* helpers instead of maccalc
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35615
2013-02-16 11:50:25 +00:00
753d713e92
ramips: use the mtd_get_mac_* helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35613
2013-02-16 11:50:21 +00:00
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
08ff976720
kernel: update linux 3.7 to 3.7.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
9ed81a91f3
ramips: build image for the Omnima EMB HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35468
2013-02-02 17:21:06 +00:00
813aec6796
ramips: add user-space support for the Omnima EMB HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35467
2013-02-02 17:21:05 +00:00
d578f3ac38
ramips: rt3883: add kernel support for the Omnima EMB HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35466
2013-02-02 17:21:01 +00:00
b99b2ff553
ramips: add userspace support for the Edimax BR-6425
...
[juhosg: remove sysupgrade changes]
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35463
2013-02-02 17:01:50 +00:00
0a42e38bad
ramips: add kernel support for the Edimax BR-6425 board
...
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35462
2013-02-02 17:01:47 +00:00
fb2e2a56d7
refresh kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35434
2013-02-01 17:28:40 +00:00
562ba537fc
kernel: update linux 3.7 to 3.7.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
756a7c5451
fix for non-blinking LAN LEDs
...
https://dev.openwrt.org/ticket/12830
SVN-Revision: 35359
2013-01-28 18:06:31 +00:00
d93706154b
ramips: reset switch on single-port devices
...
Signed-off-by: Daniel Gole <dgolle@allnet.de>
SVN-Revision: 35356
2013-01-28 17:44:41 +00:00
15be1c9ee7
kernel: update linux 3.7 to 3.7.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
ed6d399f8d
ramips: add profile and build image for the Tenda 3G300M
...
Factory image should be used to flash from
original firmware.
[juhosg: use the GENERIC_4M template]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
9891603eb5
ramips: add user-space support for the Tenda 3G300M
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
7eff5d2df0
ramips: add kernel support for the Tenda 3G300M
...
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.
Factory image should be used to flash from original firmware.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
f7a943694f
ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
...
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.
Compile-tested, the generated files inspected with "file" utility.
[juhosg:
- keep the factory.bin images to avoid users confusion,
- use GENERIC_4M template for the W306R V2.0
- update commit log]
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
6aebe6a65d
ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
...
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
60dde219d4
ramips: do not stop the build if some targets fail
...
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35238
2013-01-19 08:51:45 +00:00
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
0de21d9747
kernel: update linux 3.7 to 3.7.3
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
576aa2af0c
ramips: enable BR6425N in kernel config
...
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35191
2013-01-17 09:39:44 +00:00
ff2ce330a5
ramips: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35110
2013-01-12 12:25:30 +00:00
d53f8c3ded
ramips: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35109
2013-01-12 12:25:28 +00:00
f2f9332350
adds support for Edimax BR-6524N
...
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35020
2013-01-06 11:11:42 +00:00
569bbe4970
rt5350 switch support fix
...
RT5350 frame engine need reset frame engine and embedded switch together.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 34969
2013-01-02 11:28:21 +00:00
fb07876f25
ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
...
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34934
2012-12-30 08:23:48 +00:00
6708d68c24
ramips: build firmware image for the Planex MZK-W300NH2 Router
...
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34927
2012-12-29 17:50:40 +00:00
8b1ac2ae37
ramips: add user-space support for the Planex MZK-W300NH2 Router
...
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34926
2012-12-29 17:50:38 +00:00
d6d06aceb0
ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
...
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/ . It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.
[juhosg: move user-space support and image generation changes into
separate patches]
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34925
2012-12-29 17:50:35 +00:00
76537041eb
ramips: build image for Airlive AIR3GII
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34924
2012-12-29 17:50:34 +00:00
3aad9b4c9b
ramips: add user-space support for Airlive AIR3GII
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34923
2012-12-29 17:50:32 +00:00
3fcb8bb0dd
ramips: rt305x: add kernel support for AirLive AIR3GII
...
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.
Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button
[ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)
[juhosg: move user-space support and image generation changes into
separate patches]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34922
2012-12-29 17:50:28 +00:00
41a039f464
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
...
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
69da894432
ramips: fix ASUS WL-330N3G MAC address
...
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.
Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.
Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34877
2012-12-24 06:52:41 +00:00
c5a36f13f0
ramips: fix wifi EEPROM extraction on DIR-615-Dx models
...
Patch from #12636 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34876
2012-12-24 06:52:38 +00:00
8105c6badd
ramips: unify eeprom file name for the built-in wireless MAC
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34860
2012-12-22 16:09:03 +00:00
c81b4475c9
ramips: rt3883: fix build error
...
The cpuport_cfg field has been renamed to port0_cfg.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34859
2012-12-22 13:50:47 +00:00
b44cdcde8e
ramips: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34845
2012-12-22 12:11:13 +00:00
b81667cb23
ramips: convert to use {e,o}hci-platform driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34843
2012-12-22 12:11:08 +00:00
e1b5eeeaa4
ramips: Add USB support for DAP-1350 platform.
...
It seems to work as intended, but only lightly tested.
Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>
SVN-Revision: 34811
2012-12-20 19:17:17 +00:00
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
fe8efb72ca
ramips: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34744
2012-12-17 22:28:11 +00:00
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
c2ae0ec02a
add support for Hauppauge Broadway
...
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform. It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
e0e43655ce
ramips: fix serial console for Belkin F5D8235 v1/v2
...
Based on a patch from #12533 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
44131bd785
ramips: rt305x: add profile and build image for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
d3994b7408
ramips: rt305x: add user-space support for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
0ec59e6235
ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
...
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.
* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c
[juhosg: move user-space support and image generation into separate
patches]
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
57b7879a4e
ramips: ramips_eth: use Kconfig definition to enable debug
...
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
21d5df8700
ramips: add DIR-615 D userspace support
...
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.
An IRC user reported these changes allowed him to use wifi on his hardware.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
dd092fd10c
ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
dd8c625424
previous commit pushed 1 file too many ;)
...
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
ced0cf3a94
move ethernet hw init to init/uninit functions
...
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
6090ddc896
adds fon20n profile
...
SVN-Revision: 34112
2012-11-07 20:26:31 +00:00
3991526989
ramips: use kernel 3.6.6
...
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain ) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
SVN-Revision: 34111
2012-11-07 20:26:21 +00:00
480892226d
ramips: add HAVE_CLK to Kconfig on all ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34110
2012-11-07 20:26:04 +00:00
feb31be6af
ramips: add linux-3.6 configuration for ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
SVN-Revision: 34109
2012-11-07 20:25:55 +00:00
ca1fcaed5b
ramips: port patches to linux-3.6
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
SVN-Revision: 34108
2012-11-07 20:25:34 +00:00
a0dd47bbed
ramips: enable USB power on the DIR-645
...
Closes #12422 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
829aaedcbf
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
e91dc2e5b3
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
db5eea6acd
ramips: use correct key code for the RFKILL switch on the TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
b530d9d2b3
ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33864
2012-10-19 17:42:22 +00:00
6ca2970e4b
ramips: add profile and build image for the TEW-691GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33852
2012-10-18 07:23:13 +00:00
21180e29f7
ramips: add user-space support for TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33851
2012-10-18 07:23:12 +00:00
25d53c4c28
ramips: rt3883: add initial support for the TRENDnet TEW-691GR board
...
No wireless support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33850
2012-10-18 07:23:11 +00:00
462a53c367
ramips: add profile and build image for the TEW-692GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33849
2012-10-18 07:23:10 +00:00
d3c368c324
ramips: add user-space support for the TEW-692GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33847
2012-10-18 07:23:07 +00:00
7f8b7207c9
ramips: rt3883: add initial support for TRENDnet TEW-692GR board
...
No wireless support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33846
2012-10-18 07:23:06 +00:00
bf9ae9432b
ramips: add profile and build image for the DIR-645 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33845
2012-10-18 07:23:04 +00:00
06edafd079
ramips: add user space support for the DIR-645
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33844
2012-10-18 07:23:03 +00:00
d1a253a2fd
ramips: rt3883: add inital support for the DIR-645 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33843
2012-10-18 07:23:02 +00:00
e962c16a88
ramips: use get_magic_long in sysupgrade image check
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
d832cd11f8
ramips: add image for ALL0256N-8M
...
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.
[juhosg: change suffix from '8m' to '8M']
Patch by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33614
2012-10-04 06:34:09 +00:00
e3bcbeb427
ramips: add memory detection code for RT5350
...
SVN-Revision: 33571
2012-09-27 10:18:15 +00:00
80d2da9f0f
ramips: allow to use custom code for memory size detection
...
SVN-Revision: 33570
2012-09-27 10:18:14 +00:00
d8c04821c3
make uci-defaults switch detection work on rt5350
...
SVN-Revision: 33549
2012-09-25 14:47:18 +00:00
34d57ebd8b
add ethernet support for rt5350
...
SVN-Revision: 33548
2012-09-25 14:47:08 +00:00
af0cd76937
make ramips ethernet use a register mapping table
...
SVN-Revision: 33547
2012-09-25 14:46:58 +00:00
394a560a9a
unbreak port mapping detection
...
SVN-Revision: 33536
2012-09-25 09:51:48 +00:00
223db72385
D-Link DAP-1350; Avoid bricking esw config
...
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.
D-Link DAP-1350 goes bricked with AA 12.09-beta.
This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.
There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.
Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 33411
2012-09-15 09:28:28 +00:00
bf355f8ee9
ramips/rt3883: fix a typo in the ASUS profile
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33410
2012-09-15 09:20:50 +00:00
0a42b02126
ramips/rt305x: add initial support for Rt5350 SoC
...
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33381
2012-09-12 19:03:12 +00:00
d8b2fef763
ramips: Add missing andmask to ramips_esw register read for recv_good value.
...
Add missing andmask to ramips_esw register read for recv_good value.
Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33322
2012-09-05 20:08:43 +00:00
04c6143ca9
ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
...
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.
Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.
Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.
Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.
I did some tests regarding maximum packet size and did not see any
difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33321
2012-09-05 20:08:42 +00:00
6c7b776ae0
ramips: add rssileds to package set in profile for devices which got them.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33316
2012-09-05 19:22:48 +00:00
b0da5b73b8
ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
...
SVN-Revision: 33307
2012-08-29 10:37:51 +00:00
54d8a55eed
ramips: make built-in switch transparent for ALL0256N and ALL5002
...
This allows them to transparently communicate with an external VLAN switch.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33305
2012-08-29 10:37:47 +00:00
bc4763a399
ramips: Power down phy on disabled switch ports
...
Power down phy on disabled switch ports.
Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.
[juhosg: fix checkpatch warning]
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33304
2012-08-29 10:37:45 +00:00
1617f226a9
ramips: Add support for 8devices Carambola dev board.
...
Add support for 8devices Carambola dev board.
The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33303
2012-08-29 10:37:43 +00:00
bb0785880a
ramips: Rename POC registers
...
Rename POC registers.
The current code uses POC1-POC3.
The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2
So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
f1b9d77912
ramips: Minor ramips_esw.c cleanup
...
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
1f3400d3b4
ramips: Add switch setup to uci network defaults
...
Add switch setup to uci network defaults.
The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
3b17f1deb8
ramips: Add swconfig support to ramips_esw.c
...
Add swconfig support to ramips_esw.c
This patch adds swconfig support for ramips_esw:
Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.
The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
358c7e47f2
ramips: ramips_esw.c indentation cleanup
...
Minor indentation cleanup.
Prepare for the main swconfig patch by cleaning up indentation a bit.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
cebaa557be
ramips: fix board parameter for the NBG-419N ( #12061 )
...
SVN-Revision: 33229
2012-08-22 17:55:12 +00:00
eb54a05e89
ramips: add profile for Allnet devices
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33225
2012-08-22 12:36:35 +00:00
d77418d67e
ramips: add RSSI leds for uci-defaults for ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
67e6461ad7
ramips: add board alias for the ALL0239-3G
...
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.
The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.
I'm working on implementing fixtrx for uImage in the mtd package to solve this.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
89606b61b1
ramips: add support for D-Link DIR-615 H1
...
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.
[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
82759a1716
ramips: rename rt3352 usb platform devices
...
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
1525620b0e
ramips: watchdog: use maximum possible timeout by default
...
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.
As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
615a619bc7
ramips: provide means to specify custom "image name" for uImages, use for DIR-620
...
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
9365113040
ramips: add D-Link DIR-620 A1 support
...
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.
Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
1627b2bb4b
move rt305x-dwc driver to target specific modules.mk
...
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
5e52619b76
DWC otg usb: compilation fixes and trivial bugfix in slave mode
...
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
799d6deab0
D-Link DAP-1350 initial support
...
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
03be8d08ac
initial LED configuration for Fonera 2.0n
...
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
2d2479a033
add ALL5002 userspace support
...
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
e219c3ac3a
enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
...
Hope that this works, didn't have a chance to actually test it...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
a65eee9ac3
add image build for ALL5002
...
add image build for ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
0a08a776fb
add support for Allnet ALL5002 to kernel
...
support ALL5002 in ramips/rt305x branch of the kernel.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
6641024f50
uart_clk on Rt3352F is always 40MHz
...
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
372945185d
ramips: rt305x: add support for Edimax 3G-6200N
...
Support for Edimax 3G-6200N router with USB.
Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>
SVN-Revision: 32682
2012-07-12 13:29:46 +00:00
eee358338c
ramips: mac address detection for Fonera 2.0n
...
Detect and apply MAC address of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
833b4af816
ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
...
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w
Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>
SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
a4d96aae8d
bump to 3.3.8
...
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
ffbb4f88a9
ramips: use the generic uci-default functions for initial LED setup
...
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
c71838faa1
ramips: WAN LED for D-Link DIR-300-B1
...
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
1c552ba8e5
ramips: rt3883: add device registration code for the SPI controller
...
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
9c241983fc
ramips: allow to use the SPI driver on RT3662/RT3883
...
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
78a750dcce
ramips: rt3883: fix GPIO reservation for the SPI pins
...
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
0622fdd82c
ramips: rt305x: remove superfluous controller_data assignment
...
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
7f5bec0642
ramips: make rt2x00 firmware extraction quiet
...
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
e4720dfa95
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
1d286fd755
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
b0449ccf04
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
90e99b9fe8
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
8e06682fb7
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
8fd383ae2e
kernel: update linux 3.3 to 3.3.3
...
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
1ab80c7817
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
3626444c6d
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
5024ffb976
ramips: nuke 3.2 suport
...
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
6c8ca78067
ramips: switch to 3.3.2
...
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
5c325b0057
ramips: add support for 3.3
...
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
7f902c962b
ramips: rt305x: add OHCI/EHCI registration code for RT3352
...
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
1645928135
ramips: rt305x: fix CPU clock detection on RT3352
...
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
fb69e28eaf
ramips: rt305x: use different memory size setup for RT3352
...
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
818aeba960
ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
...
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
6b677e1d22
ramips: add swconfig to the default package list
...
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
ced031a0b2
ramips: build initramfs image for the Fonera 2.0N
...
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
fc88a363c0
ramips: rt305x: add initial support for Tenda W306R V2.0
...
More device info at: http://wiki.openwrt.org/toh/tenda/w306r
Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]
SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
88b5827c52
ramips: remove hardcoded console parameter from kernel configs
...
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
a8f2bc682e
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
16b4cbcdd6
kernel: update linux 3.2 to 3.2.14
...
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
d87efd8c3c
kernel: update linux 3.2 to 3.2.13 and refresh patches
...
Also remove a duplicate patch from lantiq (already in generic).
SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
e9c4d3d1f2
ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
...
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
d495277d9f
ramips: rt305x: build image for the DIR-615 rev D boards
...
Patch from #10105 .
SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
e4e24c5512
ramips: rt305x: add add support for the Asus WL-330N board
...
[juhosg: reorder several lines in order to keep things sorted
alphabetically]
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
c1dc6df8bd
kernel: update linux 3.2 to 3.2.12
...
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
18f7081e17
ramips: rt305x: add profile for the AZtech HW-5503G board
...
Patch from #11085 .
SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
0f77d0b2ba
ramips: add RT3350 detection
...
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
05d3f559f5
ramips: rt305x: rewrite SoC detection
...
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
8cf8ee8f9d
ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
...
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
acb4ad86e5
ramips: replace RALINK_SOC_* macros with global variables
...
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
8cff770eb3
ramips: introduce ramips_soc_prom_init and move SoC detection into that
...
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
6c51c47962
ramips: build initramfs image for DIR-{3,6}00 boards
...
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
4e15457e0e
ramips: allow to use DSP ASE on RT3xxx
...
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
0e486d2fd2
ramips: add support for unbranded XDX-RN502J board
...
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:
http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197
http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html
some reports also state the Aceex 22Y uses the same board.
more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878
[juhosg: fix checkpatch warnings, use the GENERIC_4M template]
Signed-off-by: bruno schwander <bruno@tinkerbox.org>
SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
44c8b396f9
ramips: board support for Asus RT-N10+
...
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]
Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>
SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
Gabor Juhos
John Crispin
Felix Fietkau
Jonas Gorski
Hauke Mehrtens
Florian Fainelli
Jo-Philipp Wich
Mirko Vogt
Vasilis Tsiligiannis