Commit Graph

191 Commits (32194001edf3770c88b396476fd2961ce9e53e9b)

Author SHA1 Message Date
Gabor Juhos 81f15f5026 ar71xx: add profile and build image for the TEW-673GRU board
SVN-Revision: 30377
2012-02-08 16:26:27 +00:00
Gabor Juhos faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
2012-01-31 18:37:09 +00:00
Gabor Juhos 97e4ddd012 ar71xx: add support for TP-Link TL-MR11U
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
2012-01-31 18:37:01 +00:00
Gabor Juhos 8766f32b8c ar71xx: compress kernel binaries in Image/Prepare stage
The lzma compressed kernel is used by one of the loaders.

SVN-Revision: 29971
2012-01-31 18:36:54 +00:00
Florian Fainelli eeb00634a7 add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
2012-01-28 13:19:49 +00:00
Gabor Juhos b9b768b8d3 ar71xx: use 64k block size for WZR-HP-AG300H
SVN-Revision: 29917
2012-01-27 10:42:41 +00:00
Gabor Juhos ac8116739a ar71xx: fix sysupgrade image building of atheros boards after r29899
SVN-Revision: 29916
2012-01-27 07:51:09 +00:00
Gabor Juhos 013fe76b36 ar71xx: create the temporary directory before building initramfs images
Thanks to Florian for reporting.

SVN-Revision: 29915
2012-01-26 21:28:34 +00:00
Gabor Juhos a5538a18d4 ar71xx: create a profile and build images for Compex WPE72
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29914
2012-01-26 17:01:44 +00:00
Gabor Juhos 4f3d6c9ae9 ar71xx: use the lzma loader on the Planex boards
SVN-Revision: 29900
2012-01-24 20:12:10 +00:00
Gabor Juhos 5fa9768cee ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
SVN-Revision: 29899
2012-01-24 20:12:08 +00:00
Gabor Juhos 859c915077 ar71xx: pass mtdlayout to Planex boards via command line
SVN-Revision: 29894
2012-01-24 18:40:33 +00:00
Gabor Juhos 17bb003891 ar71xx: nuke fs_all variable in image/Makefile
SVN-Revision: 29880
2012-01-24 09:47:25 +00:00
Gabor Juhos 1fb88e2541 ar71xx: create interim kernel files in a separate dir
This reduces the size of the ImageBuilder tarball a lot.

SVN-Revision: 29879
2012-01-24 09:47:23 +00:00
Gabor Juhos a43e2f508f ar71xx: prebuild all loaders in Image/Prepare stage
SVN-Revision: 29878
2012-01-24 09:47:22 +00:00
Gabor Juhos 7b7427e52c ar71xx: build ALFA AP96 images with default profile as well
SVN-Revision: 29866
2012-01-22 22:33:15 +00:00
Gabor Juhos ef1c53b7b7 ar71xx: change board id of the UniFi board
SVN-Revision: 29849
2012-01-22 13:51:50 +00:00
Gabor Juhos 4edff7d3ef ar71xx: add a profile and build images for the TL-WR2543N/ND
SVN-Revision: 29682
2012-01-07 19:36:42 +00:00
Gabor Juhos 1e848b17ad ar71xx: add support for Redwave RW2458N
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
2012-01-06 07:20:59 +00:00
Gabor Juhos d65c6fe720 ar71xx: create profile and build image for the ALFA AP96 board
SVN-Revision: 29663
2012-01-04 21:13:57 +00:00
Gabor Juhos 807e046193 ar71xx: specify console kernel parameter for the Compex boards
SVN-Revision: 29660
2012-01-04 17:30:59 +00:00
Gabor Juhos 2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
2012-01-04 17:30:57 +00:00
Gabor Juhos ac68f0d8fa ar71xx: add profile and build image for the TL-WA701N/ND boards
SVN-Revision: 29656
2012-01-04 17:30:54 +00:00
Gabor Juhos 1045c83527 ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
Gabor Juhos 8854c90119 ar71xx: add profile and build factory image for the Hornet-UB board
SVN-Revision: 29637
2012-01-01 19:30:29 +00:00
Gabor Juhos 1d3de89f3c ar71xx: build images for the ALFA Network N2/N5 boards
SVN-Revision: 29636
2012-01-01 19:30:28 +00:00
Felix Fietkau 0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
2011-12-18 22:20:17 +00:00
Gabor Juhos 5a0a2b2f1b ar71xx: use 64kraw template on more TP-Link boards
SVN-Revision: 29561
2011-12-17 18:49:55 +00:00
Gabor Juhos bfe747b7d9 ar71xx: build images for TL-WR741N/ND v2
SVN-Revision: 29548
2011-12-15 22:03:48 +00:00
Gabor Juhos aefff26624 ar71x: use raw squashfs images for TP-Link boards
SVN-Revision: 29547
2011-12-15 22:03:46 +00:00
Gabor Juhos d5bd28ffae ar71xx: create a template for using unpadded squashfs images
SVN-Revision: 29546
2011-12-15 22:03:45 +00:00
Gabor Juhos dbc4fa4b5b ar71xx: put squash image right after the kernel on TP-Link boards
SVN-Revision: 29545
2011-12-15 22:03:44 +00:00
Gabor Juhos d3058b8f8c ar71xx: build image for the Hornet-UB board
SVN-Revision: 29536
2011-12-14 20:54:11 +00:00
Gabor Juhos d2717d3d47 ar71xx: get rid of squashfs-4k images
SVN-Revision: 29522
2011-12-13 20:41:24 +00:00
Gabor Juhos 058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
2011-12-13 14:59:40 +00:00
Gabor Juhos 6e69765559 ar71xx: fix WNDR3x00 factory image generation
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29473
2011-12-07 06:55:50 +00:00
Gabor Juhos c6b2b98812 ar71xx: create firmware image for the TL-WR740N/ND v4 boards
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

SVN-Revision: 29468
2011-12-06 16:26:44 +00:00
Gabor Juhos fbfad4e9b4 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw
SVN-Revision: 29467
2011-12-06 16:26:43 +00:00
Gabor Juhos d753e08c79 ar71xx: fix TL-MR3x20 profile names in image/Makefile
SVN-Revision: 29463
2011-12-06 13:53:21 +00:00
Gabor Juhos 62d8009cdd ar71xx: cleanup TP-Link profiles
SVN-Revision: 29461
2011-12-06 10:29:25 +00:00
Gabor Juhos 4dc9092f4b ar71xx: reclaim some unused space on TP-Link boards
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

SVN-Revision: 29447
2011-12-05 14:52:36 +00:00
Gabor Juhos feebf484ba ar71xx: use the lzma-loader on TP-Link boards w/o lzma support
SVN-Revision: 29444
2011-12-05 14:52:28 +00:00
Felix Fietkau 1f809532de ar71xx: add preliminary support for wzr-hp-g450h
SVN-Revision: 29441
2011-12-05 14:20:51 +00:00
Gabor Juhos 4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling
SVN-Revision: 29434
2011-12-05 13:03:54 +00:00
Gabor Juhos 8a3a60fc64 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big
SVN-Revision: 29431
2011-12-05 12:47:53 +00:00
Gabor Juhos 20483faed0 ar71xx: create initramfs images for the newer TP-Link boards
SVN-Revision: 29410
2011-12-03 16:57:23 +00:00
Gabor Juhos a02a9c3f8b ar71xx: reclaim unused space in WNDR3700/3800 images
Patch by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29406
2011-12-03 16:33:38 +00:00
Gabor Juhos ac82296c53 ar71xx: add a profile and build image for the OM2P board
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29397
2011-12-01 22:49:05 +00:00
Gabor Juhos f188f1bad5 ar71xx: add support for Ubiquiti AirRouter
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
2011-12-01 22:49:02 +00:00
Gabor Juhos c20d7378e5 ar71xx: fix wndr3800 machine name
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
2011-11-24 20:09:38 +00:00