3b7882e775
iwinfo: don't use the txpower value from debugfs for now, it does not match the values reported via wext
...
SVN-Revision: 35007
2013-01-04 14:08:08 +00:00
ff0c7a9ec9
don't depend on lua
...
Delete +lua from libiwinfo-lua.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 35005
2013-01-04 09:32:06 +00:00
e8c86dd070
mac80211: b43: add firmware for HT-PHY by default.
...
remove firmware for LP-Phy core rev 14, I have never seen such a device.
SVN-Revision: 35000
2013-01-03 18:52:08 +00:00
96f3911981
kernel: move regmap bloat out of the kernel image if it is only being used in modules
...
SVN-Revision: 34999
2013-01-03 18:39:50 +00:00
1dada293bf
add kmod-fs-configfs to replace kernel bloat added by selecting kmod-mmc-over-gpio
...
SVN-Revision: 34998
2013-01-03 18:04:04 +00:00
ac383f95a5
broadcom-diag: add diag support for Linksys E1000 V1
...
This adds diag leds/buttons support for Linksys E1000 V1. It worked on
my router, however it may need some tweaking by people more familiar
with openwrt and c to make it fit for commiting.
Thank you hhm for this patch.
SVN-Revision: 34996
2013-01-03 02:07:11 +00:00
8f6bdcffa1
brcm47xx: build b44 as a module
...
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
d8f1fa1e38
switch: ROBO Switch Gigabit MII Support
...
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD. This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.
In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex. I was not able to isolate the source of the problem
(this patch, driver or H/W limitation). The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).
I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34992
2013-01-03 01:58:01 +00:00
63ec34612c
switch: improve error messages
...
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34991
2013-01-03 01:57:19 +00:00
25afeba608
brcm47xx: add a new version of the nvram rewrite patch
...
This is the version like it was send for mainline inclusion.
SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
965afef317
ipv6-support: Update iteration * Add support for blocking forwarding while address assignments * Fix relay restarting function
...
SVN-Revision: 34985
2013-01-02 23:05:44 +00:00
c7d9d7c952
odhcp6c: Add support for SNTP and SIP options
...
SVN-Revision: 34984
2013-01-02 23:05:39 +00:00
4a2e55f30f
6relayd: Announce RDNSS and DNSSL via RA
...
SVN-Revision: 34983
2013-01-02 23:05:35 +00:00
1683a146f4
iwinfo: replace more wext calls with nl80211 equivalents, attempt to infer nl80211 tx power from debugfs before querying wext
...
SVN-Revision: 34982
2013-01-02 19:10:29 +00:00
8447af36e3
ath9k: disable TX_IQ_ON_AGC_CAL on AR934x, should improve stability
...
SVN-Revision: 34979
2013-01-02 17:37:30 +00:00
70b0ef6322
sysupgrade: clarify online help
...
Fixes #12346 .
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 34975
2013-01-02 16:21:30 +00:00
58070b0083
sysupgrade: do not require an extra argument after --restore-backup
...
Neither --create-backup nor --restore-backup need an image name (following
the backup filename). Treat them in uniform way.
Mostly fixes #12346 .
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 34974
2013-01-02 16:21:26 +00:00
54c0b40427
dnsmasq: allow dhcp host entries without mac addresses ( #11928 )
...
SVN-Revision: 34971
2013-01-02 15:14:19 +00:00
c8a8f8fd55
lldpd: various enhancements
...
- introduce "list interface" options to specify the ifaces to listen on, takes uci- or network device name
- set the default system description to distrib @ hostname, e.g. "OpenWrt Barrier Breaker r34744 @ vbox"
- introduce "option lldp_description" to override the automatically generated description
SVN-Revision: 34970
2013-01-02 14:35:43 +00:00
a730e96569
Remove remaining etrax references
...
SVN-Revision: 34968
2013-01-02 11:28:11 +00:00
075ea0d52e
fix typo in HFS kernel module
...
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
SVN-Revision: 34963
2013-01-02 10:29:45 +00:00
15e29f3d9b
fixes libertas firmware install path
...
fixes #12712
SVN-Revision: 34961
2013-01-02 10:08:54 +00:00
12f36652e6
fix video modules package generation
...
The folder layout changed between 3.6 and 3.7
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 34960
2013-01-02 09:43:07 +00:00
7a25be66c3
6relayd: Detect changes of default routes for RAs
...
SVN-Revision: 34958
2013-01-01 21:41:37 +00:00
def80bbecf
ipv6-support: Remove unnecessary code
...
SVN-Revision: 34957
2013-01-01 21:41:32 +00:00
cbc9dfc56a
package/kernel: select crypto-sha256 for cifs on 3.7+
...
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34956
2013-01-01 19:04:20 +00:00
ab4ea8ad16
package/kernel: create separate package for the sha256 crypto module
...
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34955
2013-01-01 19:04:17 +00:00
4c09d5dde3
ipv6-support: Fix typo in dhcpv6-script * thanks to KarlHegbloom for reporting
...
SVN-Revision: 34940
2012-12-31 09:38:59 +00:00
1d50d60fc0
rtc-rv5c386a: fix compilation for kernel >= 3.4
...
SVN-Revision: 34938
2012-12-30 15:32:53 +00:00
190c566210
acx-mac80211: fix compilation
...
Some header files from mac80211 are now moved to the uapi dir.
SVN-Revision: 34937
2012-12-30 15:28:28 +00:00
fc760260dd
uci: disable parallel builds again, the lua<->libuci dependency is not safe
...
SVN-Revision: 34936
2012-12-30 14:58:37 +00:00
b7c1f24f9b
ipv6-support: Use more consistent default values
...
SVN-Revision: 34913
2012-12-29 10:12:31 +00:00
b41d96e8b7
mac80211: refresh patches
...
SVN-Revision: 34911
2012-12-28 21:05:57 +00:00
29d737a976
mac80211: assume 2-byte aligning for 802.11 packets, slightly improves code size and performance
...
SVN-Revision: 34910
2012-12-28 21:05:49 +00:00
e7719bb4aa
ipv6-support: Updated functionality * Add site-border feature again * Add option to always announce a default router
...
SVN-Revision: 34908
2012-12-28 12:02:22 +00:00
ce41e59030
6distributed: Add null-route for delegated prefix * Fixes forwarding loops for unused subprefixes
...
SVN-Revision: 34907
2012-12-28 12:02:17 +00:00
d6c955e39a
6relayd: Announce DNS search domain via DHCPv6
...
SVN-Revision: 34906
2012-12-28 12:02:12 +00:00
662c1f16bb
uci: update to latest version (adds list delete support), enable parallel build
...
SVN-Revision: 34899
2012-12-27 17:37:10 +00:00
253d7345e1
ipv6-support: Remove site-border feature * was causing routing problems * will be reimplemented using firewall
...
SVN-Revision: 34898
2012-12-27 15:47:53 +00:00
941f4ccd68
Remove site-border routing filter due to problems
...
SVN-Revision: 34897
2012-12-27 15:47:47 +00:00
01059c8914
ipv6-support: * Automatically detect and propagate MTU from upstream interfaces * Add site-border feature (RFC 6204, ULA-4) * Fix a typo
...
SVN-Revision: 34896
2012-12-27 14:10:17 +00:00
50a9fed238
6distributed: feature update * Add feature to decrease IPv6-specific MTU on-demand * Add commands to enable / disable a site-border
...
SVN-Revision: 34895
2012-12-27 14:10:12 +00:00
4bab347e98
6relayd: Advertise IPv6-specific MTU instead of generic * Fixes announced MTU when using tunnels
...
SVN-Revision: 34894
2012-12-27 14:10:07 +00:00
f657787b52
base-files: Fix a typo in config_list_foreach
...
SVN-Revision: 34893
2012-12-27 14:10:01 +00:00
ab6e2e6928
base-files: ipcalc.sh: fix broken calculations on 64bit systems
...
Calculate complements by using awk's xor() function with a mask of 0xffffffff
instead of relying on the compl() function which appears to produce broken
results on certain 64bit architectures.
SVN-Revision: 34875
2012-12-23 22:18:43 +00:00
970adc9eb9
ipv6-support: Fix default RA settings for dnsmasq
...
SVN-Revision: 34873
2012-12-23 18:22:48 +00:00
a1e2b2ebe8
busybox: (vconfig) do not attempt to open /proc/net/vlan/config for no good reason ( fixes #12663 )
...
SVN-Revision: 34872
2012-12-23 10:59:57 +00:00
9801f4687f
opkg: keep package list files compressed when src/gz is used, reduces tmpfs usage
...
SVN-Revision: 34869
2012-12-22 19:31:37 +00:00
7ed89e8542
dropbear: convert init script to procd
...
SVN-Revision: 34867
2012-12-22 18:56:13 +00:00
bbc6694d98
base-files: add basic procd integration, let procd start (and restart) ubus instead of having an ubus init script
...
SVN-Revision: 34866
2012-12-22 18:56:09 +00:00
6061734323
procd: add initial implementation
...
procd is the new OpenWrt process management daemon. It keeps track of processes
started from init scripts (via ubus calls), and can suppress redundant service
start/restart requests when the config/environment has not changed.
SVN-Revision: 34865
2012-12-22 18:56:06 +00:00
b0c855253b
libnl-tiny: add includedir to pkg-config cflags
...
SVN-Revision: 34864
2012-12-22 18:56:01 +00:00
82bd58c793
dropbear: use network_get_device instead of scan_interfaces to get the device name
...
SVN-Revision: 34863
2012-12-22 18:55:57 +00:00
a4e656ef24
ipv6-support: Preliminary support for dnsmasq >=2.66
...
SVN-Revision: 34858
2012-12-22 13:00:53 +00:00
2dbfffef68
6relayd: Fix detection of prefix changes
...
SVN-Revision: 34857
2012-12-22 13:00:49 +00:00
f36c3067c6
odhcp6c: Fix build on arch where char is unsigned
...
SVN-Revision: 34856
2012-12-22 13:00:45 +00:00
970c5d97fe
6distributed: Improve prefix deprecation algorithm
...
SVN-Revision: 34855
2012-12-22 13:00:40 +00:00
fcf65bdee3
package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34844
2012-12-22 12:11:09 +00:00
6531546751
add OF binding
...
SVN-Revision: 34834
2012-12-21 20:03:49 +00:00
bac5ef2a2f
adsl firmware in wrong submenu
...
SVN-Revision: 34819
2012-12-21 13:47:30 +00:00
9a134fb7c0
minor cleanup for adsl firmware handling
...
SVN-Revision: 34818
2012-12-21 13:47:25 +00:00
346a8e5878
properly symlink the adsl firmware
...
SVN-Revision: 34817
2012-12-21 13:47:20 +00:00
4cca5cd4fd
hot-fix nameclash in sysupgrade: rename pivot() to supivot() in sysupgrade
...
Sysupgrade defines its very own pivot() function.
Prior merging boot.sh and functions.sh sysupgrade just included boot.sh,
now it includes functions.sh which defines pivot() as well, however
slightly different which causes sysupgrade to fail.
This is a hot-fix to unbreak sysupgrade, however those two pivot()
functions should actually get merged.
SVN-Revision: 34815
2012-12-21 12:10:21 +00:00
65efd09b78
base-files: we don't need /etc/functions.sh symlink anymore
...
SVN-Revision: 34802
2012-12-20 15:15:30 +00:00
4d4b2d3ced
merge /lib/functions/boot.sh and /lib/functions.sh
...
SVN-Revision: 34794
2012-12-19 16:07:53 +00:00
439a869090
Do not overload mount-call - trying to reduce confusion
...
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
ec9ce7e089
change prefix for util-linux binaries from / to /usr
...
The prefix / causes executables like mount, umount, etc. to be placed
in /bin /sbin which therewith replace the busybox symlinks.
mount and umount e.g. are linked again libmount.so.
This is e.g. fatal during a sysupgrade, where /bin/mount,
/bin/umount, etc. but not libmount.so get copied into a ramdisk
which will result in non working executables within the ramdisk.
SVN-Revision: 34791
2012-12-19 16:07:42 +00:00
50983767b3
block-mount: add a delay between sto pand start in fstab init restart action, fixes a lock race condition observed in VirtualBox
...
SVN-Revision: 34784
2012-12-19 09:41:28 +00:00
3b79fe662a
ltq-hcd usb fix high speed hub mode
...
Simple update for USB api changes.
Signed-off-by: Conor O'Gorman <i@conorogorman.net>
SVN-Revision: 34770
2012-12-18 19:31:46 +00:00
149b1c46c7
ipset: update to 6.16.1 to fix build with kernel 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34752
2012-12-18 14:50:44 +00:00
ae97cc7d0f
kernel: fix module names for crypto modules in 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34751
2012-12-18 14:50:43 +00:00
b9d314aee9
libubox: fix a jshn array sequence counter bug, fixes some network.sh issues
...
SVN-Revision: 34746
2012-12-18 13:08:50 +00:00
bf34eeaea4
netifd: update to latest version, fixes interface error reporting for shell proto handlers
...
SVN-Revision: 34741
2012-12-17 22:24:31 +00:00
ba2286296e
ncurses: fix build error in libncursesw
...
SVN-Revision: 34739
2012-12-17 15:11:47 +00:00
e1e00aed52
sierra-directip: delete, replaced by upstream drivers
...
SVN-Revision: 34738
2012-12-17 15:11:43 +00:00
14281559e1
netifd: update to latest version, no longer needs the removed jshn_append() shell function
...
SVN-Revision: 34734
2012-12-17 14:57:15 +00:00
3339316fbe
base-files: use json_is_a() in network.sh
...
SVN-Revision: 34733
2012-12-17 13:07:42 +00:00
e0ad41ead8
libubox: update to latest git head, introduces jshn json_is_a() helper
...
SVN-Revision: 34732
2012-12-17 13:07:38 +00:00
17acf9bf27
base-files: rework cache handling in network.sh to keep the entire parsed ifstatus, use jshn namespaces to support using it concurrently with other jshn users
...
SVN-Revision: 34725
2012-12-16 20:17:18 +00:00
1536f2be63
libubox: another jshn update, fixes array handling issues
...
SVN-Revision: 34723
2012-12-16 18:59:01 +00:00
1600ba99e4
base-files: various enhancements to network.sh
...
- support reading inactive gateways and DNS information in
network_get_gateway(), network_get_dnsserver() and network_get_dnssearch()
by passing "true" as optional last argument
- internally cache fetched values to speed up subsequent accesses to the same
data, introduce network_flush_cache() to clear them
- add some inline function documentation
SVN-Revision: 34722
2012-12-16 18:22:02 +00:00
595b48be55
libubox: fix some jshn variable handling regressions
...
SVN-Revision: 34720
2012-12-16 17:05:46 +00:00
a7877699f7
libubox: update to latest version, adds jshn namespace support
...
SVN-Revision: 34718
2012-12-16 16:49:47 +00:00
056d75049d
wpa_supplicant.sh: always use parameters from the current section
...
Using variables from the outer scope unnecessarily complicates the code and
leads to issues.
This patch fixes the bug when having an "adhoc" wifi-iface section before a
"sta" section prevents wpa_supplicant from using the key specified in the
corresponding section as it tries to use the "adhoc" key instead (1 by
default).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 34716
2012-12-16 13:23:37 +00:00
e9c0b95829
fixes uapi helper define
...
SVN-Revision: 34715
2012-12-16 11:04:27 +00:00
b9d1bdb374
kernel: add a module for ipv6 gre
...
SVN-Revision: 34709
2012-12-15 21:59:56 +00:00
fba5be2dc5
ubus: update to latest version, fixes request timeout handling issues, hangs on lots of requests, adds object notification support
...
SVN-Revision: 34705
2012-12-15 17:19:29 +00:00
860c2e8116
netifd: call /etc/udhcp.user from the netifd dhcp.script
...
This was done previously when dhcp was handled by the network scripts.
So netifd should behave the same.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 34704
2012-12-15 17:19:24 +00:00
66daf1ef61
allow to load only 1 usb port on AR9 / VR9
...
SVN-Revision: 34700
2012-12-15 11:01:05 +00:00
baae9d16e9
move voice packages
...
SVN-Revision: 34695
2012-12-15 02:00:45 +00:00
06c9170a7c
move ltq-adsl-tool
...
SVN-Revision: 34694
2012-12-15 02:00:39 +00:00
1d0a9d0c04
move ltq-adsl
...
SVN-Revision: 34693
2012-12-15 02:00:33 +00:00
c2738a9559
move ltq-ifxos
...
SVN-Revision: 34692
2012-12-15 02:00:26 +00:00
9b429a123d
add ltq-ptm
...
SVN-Revision: 34690
2012-12-15 02:00:13 +00:00
c2e2323e1d
add ltq-deu
...
SVN-Revision: 34689
2012-12-15 02:00:05 +00:00
65d9ff5054
add ltq-hcd
...
SVN-Revision: 34688
2012-12-15 01:59:53 +00:00
240a3a38e1
fixes uboot dependency
...
SVN-Revision: 34686
2012-12-15 01:59:35 +00:00
12cfa40375
add crypto-pcompress
...
SVN-Revision: 34685
2012-12-15 01:59:29 +00:00
4583469413
make use of uapi directory wrapper
...
SVN-Revision: 34684
2012-12-15 01:59:19 +00:00
86cd825c1f
package/swconfig: don't use kernel headers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34679
2012-12-14 12:11:50 +00:00
588b42a8b7
broadcom-wl: Pass physical address to wl_attach
...
wl_attach expects a physical address, as it performs the mapping internally.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34671
2012-12-13 18:55:49 +00:00
b85c8a6361
netifd: update to latest version, fixes purging old resolv.conf entries after ifdown
...
SVN-Revision: 34664
2012-12-13 16:14:41 +00:00
64f0b22052
build: only install packages for selected variants, fixes building multiple variant selections in one tree
...
SVN-Revision: 34656
2012-12-13 13:07:01 +00:00
3a4a6cfd64
kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
...
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
1552af3131
base-files: add mtd_find_chardev helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34648
2012-12-12 16:49:50 +00:00
ee17703371
Revert "remove function find_mtd_part() from /lib/functions.sh"
...
Reverting commit 34641.
Function find_mtd_part() is needed by some scripts deployed
for certain targets but not including boot.sh after all.
Still, all this certainly needs some love.
SVN-Revision: 34642
2012-12-12 13:41:56 +00:00
1521cdda0f
remove function find_mtd_part() from /lib/functions.sh
...
Since all scripts using this function include /lib/functions/boot.sh -
where this function is defined as well - it can be dropped
from /lib/functions.sh. Also avoids further confusion about this
function being declared and defined in two different places.
SVN-Revision: 34641
2012-12-12 12:38:31 +00:00
a6112c3e8a
mac80211: update rt2x00 rx_status patch
...
Also remove the superfluous ones for ath5k, p54.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34637
2012-12-11 17:49:11 +00:00
8d9564af1b
ipv6-support: Make ULA addresses secondary * Deprecates ULA prefixes when there are other public prefixes * Fixes issues with clients using incorrect source addresses
...
SVN-Revision: 34630
2012-12-11 16:56:37 +00:00
8546f8a401
6distributed: Add support for secondary addresses
...
SVN-Revision: 34629
2012-12-11 16:56:32 +00:00
14273e1120
6relayd: Fix announcement of deprecated prefixes
...
SVN-Revision: 34628
2012-12-11 16:56:27 +00:00
1a000cfcef
mac80211: zero-out rx_status in rt2x00, ath5k, p54
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34627
2012-12-11 14:16:23 +00:00
51f59a4f53
mac80211: fix possible NULL pointer dereference in ath9k
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34624
2012-12-10 23:21:02 +00:00
b7f026680a
package/kernel: enable CONFIG_SND_SOC_DMAENGINE_PCM in sound-soc-core
...
This is required for 3.6+ kernels and some sound SoC modules.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34618
2012-12-10 21:05:32 +00:00
157cccaa6b
package/kernel: snd-soc-core depends on regmap
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34616
2012-12-10 21:05:15 +00:00
7685458982
package/kernel: package kmod-input-matrixkmap
...
This is required by some keyboard drivers in 3.6+
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34614
2012-12-10 21:05:06 +00:00
1820e8566e
kernel: include the xfrm_algo module on 3.6+ ( fixes #12552 )
...
SVN-Revision: 34611
2012-12-10 18:49:30 +00:00
b8757c644f
mac80211: fix channel context related warnings when using wds ap mode ( fixes #12585 )
...
SVN-Revision: 34610
2012-12-10 18:29:17 +00:00
faba477274
ipv6-support: Add support for NPT status tracking
...
SVN-Revision: 34609
2012-12-10 16:46:59 +00:00
cd76023e97
6distributed: add status-call for luci-integration
...
SVN-Revision: 34608
2012-12-10 16:46:54 +00:00
e3128792fe
b43: fix tx path skb leaks
...
SVN-Revision: 34607
2012-12-10 16:43:01 +00:00
dfd718d13d
mac80211: ath9k: allow to load EEPROM data via firmware API
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
0739a2bb9c
mac80211: ath9k: fix OTP register offsets for AR9340
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34605
2012-12-10 15:46:13 +00:00
19fc506333
ath5k: fix skb leaks (should fix #12199 )
...
SVN-Revision: 34603
2012-12-10 15:42:34 +00:00
cb9c63048d
mac80211: fix setting txpower ( #12594 )
...
SVN-Revision: 34594
2012-12-10 13:51:09 +00:00
01513b7c8b
iw: sync with nl80211.h to fix setting antenna gain
...
SVN-Revision: 34593
2012-12-10 13:51:06 +00:00
8d15b064e0
ath9k: improve signal strength / channel noise reporting accuracy
...
SVN-Revision: 34592
2012-12-10 13:51:02 +00:00
45a0216593
mac80211: refresh patches
...
SVN-Revision: 34591
2012-12-10 13:50:58 +00:00
77c14b1a99
mac80211: merge fix for carl9170 upstream regression
...
SVN-Revision: 34590
2012-12-10 13:50:54 +00:00
a07ddb955f
ipv6-support: Next iteration * Make ula_prefix a global option * Add preliminary support for NAT (Linux >= 3.7, ip6tables >= 1.4.17) * Minor fixes for prefix fallback
...
SVN-Revision: 34586
2012-12-09 13:54:22 +00:00
57d853ffc4
6distributed: Correctly handle duplicate prefixes
...
SVN-Revision: 34585
2012-12-09 13:32:30 +00:00
eeeb59e451
6relayd: Always send NA with hop-limit 255 * thanks risa2000 for investigating
...
SVN-Revision: 34584
2012-12-09 12:33:28 +00:00
a087cde13e
mac80211: do not build mwifiex driver
...
SVN-Revision: 34573
2012-12-07 18:10:14 +00:00
6716ba9aad
mac80211: update to wireless-testing 2012-12-06
...
SVN-Revision: 34571
2012-12-07 16:46:04 +00:00
3365e2caf0
mac80211: brcmsmac: do a read after write when writing objmem to device.
...
SVN-Revision: 34570
2012-12-07 16:24:35 +00:00
16d0957a4e
firewall: fix typo in reflection hotplug script
...
SVN-Revision: 34569
2012-12-07 13:08:28 +00:00
63135142d8
6to4: Remove static radvd-integration * Please use the new ipv6-support package
...
SVN-Revision: 34567
2012-12-07 08:53:53 +00:00
5679d5d1e1
mac80211: add support for adm8211 wireless driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34560
2012-12-06 22:40:45 +00:00
82576f0ca3
ipv6-support: next iteration * Introduce mode 6rd * Introduce mode 6to4 * Fix announcement of DNS-Servers received from DHCPv6 * Fix some corner-cases in relaying behaviour
...
SVN-Revision: 34542
2012-12-06 20:52:40 +00:00
61e8c6b83b
6relayd: More RFC-compatibility and size reduction
...
SVN-Revision: 34541
2012-12-06 20:52:35 +00:00
f14e1f1b1d
6distributed: Add compatibility with 6rd and 6to4
...
SVN-Revision: 34540
2012-12-06 20:52:30 +00:00
d221222907
ppp: unconditionally start pppd with nodefaultroute and usepeerdns ( #12580 )
...
Since the switch to netifd, proto handlers may always set the defaultroute
and provide dns server addresses, netifd will decide in the generic code
path whether the announced values are masked or not.
Additionally protocol handlers should not modify the routing tables themselves
and prevent any launched services from doing so.
Remove the additional defaultroute and peerdns option handling from the ppp.sh
protocol handler and rely on netifd to mask or not mask the values.
SVN-Revision: 34536
2012-12-06 18:17:21 +00:00
94c1d77886
kernel: fix video-core build on 3.6+
...
SVN-Revision: 34533
2012-12-06 14:11:19 +00:00
3e5940532d
mac80211: clean up patches, replace patching config.mk with a generated sed expression
...
SVN-Revision: 34531
2012-12-06 14:11:09 +00:00
85ce5212fe
libiconv-full: add clause to Makefile to actually install iconv
...
At present, if you select the iconv utility it will be built but not
installed. This patch adds the clauses necessary to the Makefile to
actually install iconv.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34530
2012-12-05 18:05:04 +00:00
eaa30e9776
linux-atm: put all packages into their own submenus
...
Now that we package individual tools as well, the list of ATM tools is
pretty big to deserve its own submenu.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34504
2012-12-05 14:58:54 +00:00
da069ac466
linux-atm: fix typo introduced in r34502
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34503
2012-12-05 14:37:03 +00:00
b459e36579
linux-atm: package each available atm debug tool individually
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34502
2012-12-05 14:18:08 +00:00
838d6e3b8d
netifd: update to latest version, fixes resolv.conf writes on interface setting changes
...
SVN-Revision: 34500
2012-12-05 13:28:56 +00:00
9e355444a6
dropbear: update to 2012.55 and refresh patches
...
Upstream has a few code cleanups, more eagerly burns sensitive memory and
includes the fix for CVE-2012-0920. Full changelog:
https://matt.ucc.asn.au/dropbear/CHANGES
Local changes:
- Removed PKG_MULTI which is no longer in options.h (even before 2011.54)
- Merged DO_HOST_LOOKUP into 120-openwrt_options.patch
- Removed LD from make opts (now included in TARGET_CONFIGURE_OPTS)
- Removed 400-CVE-2012-0920.patch which is included in 2012.55
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34496
2012-12-04 16:40:17 +00:00
4f78be25e1
linux-atm: create atm-debug-tools package
...
Instead of commenting the inclusion of some binaries, just make them
available using a new package "atm-debug-tools."
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34477
2012-12-04 16:19:24 +00:00
250773ef32
linux-atm: factor common descriptions
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34476
2012-12-04 16:19:21 +00:00
6504b268b3
firewall: extend nat reflection support
...
- use comment match to keep track of per-network rules
- setup reflection for any interface which is part of a masqueraded zone, not just "wan"
- delete per-network reflection rules if network is brought down
SVN-Revision: 34472
2012-12-04 15:24:21 +00:00
8516ddb133
mac80211, hostapd: Fix macfilter for multi bssid setups
...
Previously only the first macfilter configuration would have been used
on all interfaces. However, the configuration was always done per vif
already. Hence, move the macfilter setup into hostapd.sh where and
create one mac list file per vif.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 34470
2012-12-04 12:06:40 +00:00
4c30952394
Make ltq-dsl-app compile with an eglibc-based toolchain
...
Signed-Off-By: Frank Meerkötter <frank@meerkoetter.org>
SVN-Revision: 34468
2012-12-03 12:46:57 +00:00
4bda16cf27
ipv6-support: Second Iteration * mode 'downstream' renamed to 'router' * mode 'upstream' renamed to 'dhcpv6' * mode 'relay' added * cleanups and minor bugfixes in state handling
...
SVN-Revision: 34466
2012-12-03 09:18:53 +00:00
71ed7ae842
netifd: empty hotplug handler removed
...
SVN-Revision: 34465
2012-12-03 07:20:44 +00:00
8cfe4bf9cd
mac80211: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34464
2012-12-02 20:41:39 +00:00
7a26eb9f13
mac80211: rename a misnamed ath9k patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34463
2012-12-02 20:41:37 +00:00
c6b0c63cad
6distributed: Poll for ubus to come up (fix race)
...
SVN-Revision: 34462
2012-12-02 19:06:48 +00:00
d38be845f4
libubox: update to latest version, fixes blob/blobmsg endian issues
...
SVN-Revision: 34456
2012-12-02 16:50:39 +00:00
3399d16dd7
broadcom-wl: get the mmio address directly from the struct if bcma is used.
...
SVN-Revision: 34452
2012-12-02 16:07:43 +00:00
5d8a7a0ce5
Make teql hotplug script run sooner
...
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.
This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34442
2012-12-02 13:04:03 +00:00
a99b0363d0
package: use file_copy to deploy files/ in the package/install phase
...
SVN-Revision: 34438
2012-12-02 12:20:38 +00:00
4a1e2123eb
kernel: remove references to TARGET_ubicom32
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34431
2012-11-30 10:53:51 +00:00
a0f0c23109
ipv6-support: Add conffiles section
...
SVN-Revision: 34423
2012-11-29 20:33:17 +00:00
a4edea5ef3
ipv6-support: Add new IPv6-support meta-package
...
SVN-Revision: 34422
2012-11-29 20:14:28 +00:00
e6e6e0d152
odhcp6c: Add new embedded DHCPv6 client
...
SVN-Revision: 34421
2012-11-29 20:14:23 +00:00
25d943e872
6distributed: add local IPv6 prefix distributor
...
SVN-Revision: 34420
2012-11-29 20:14:18 +00:00
7d3495b431
6relayd: Fix some RFC 6204 compatibility issues
...
SVN-Revision: 34419
2012-11-29 20:14:14 +00:00
dffa972af1
Remove old IPv6 sysctl-config (deprecated)
...
SVN-Revision: 34418
2012-11-29 20:14:09 +00:00
3b0e77ee6b
Remove default sysctl-entry for IPv6 here (races)
...
SVN-Revision: 34417
2012-11-29 20:14:04 +00:00
769c322cd0
uboot-kirkwood: build in $(BUILD_DIR)
...
SVN-Revision: 34401
2012-11-29 01:04:37 +00:00
d2d458324b
gettext-full: use shipped libxml for the host build, fixes lzma references from creeping in on certain distributions
...
SVN-Revision: 34400
2012-11-28 21:02:53 +00:00
32dcd5d6c7
trace-cmd: lazily evaluate extra plugins list, fixes stray build errors causing by missing operands to cp if the package was never built yet
...
SVN-Revision: 34390
2012-11-27 18:08:42 +00:00
78cec2cfca
grub2: fix another case of gnulib failing under gnu libc
...
SVN-Revision: 34389
2012-11-26 16:03:40 +00:00
e9b6c999f5
broadcom-wl: fix two problems when more then one wifi card is available.
...
* The device should get a unique name at the beginning and not wl%d.
* load the nvram just one time into the own buffer, also when there is
more than one device.
SVN-Revision: 34381
2012-11-25 20:11:15 +00:00
38fced86ee
base-files: add support for the morse LED trigger
...
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34380
2012-11-25 17:20:49 +00:00
203cbbd51d
modules: remove obsolete comment ( #12514 )
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34327
2012-11-25 11:41:07 +00:00
062d3c1e67
iptables: fix typo in iptables musl patch after r34313
...
Thanks to Frank Meerkötter and Szabolcs Nagy for spotting the issue.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34326
2012-11-25 11:40:59 +00:00
6b63716262
add preliminary support for musl
...
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34314
2012-11-23 20:02:29 +00:00
14ed3f0f22
iptables: add some musl portability fixes
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34313
2012-11-23 20:02:23 +00:00
ba6c8bd614
linux-atm: add portability fixes
...
Spotted while building against musl libc.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34312
2012-11-23 20:02:19 +00:00
92fd6e6f1a
busybox: fix arping applet building on musl
...
musl-libc is more strict about missing includes.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34311
2012-11-23 20:02:14 +00:00
94bdc366d4
netfid: fix build on musl
...
AF_INET* is provided by sys/socket.h
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34310
2012-11-23 20:02:10 +00:00
7c26e53d5d
busybox: define musl specificities in platform.h
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34309
2012-11-23 20:02:06 +00:00
5ae2524d3a
base-files: use a natural mount syntax
...
Busybox built against musl-libc will choke on these otherwise, besides that
it is more natural to use the filesystem type, then options, then name, then
mountpoint.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34308
2012-11-23 20:02:02 +00:00
bc8fe9b40f
busybox: change the date -k patch to be more portable
...
Not all libcs have support for tm_gmtoff which is only available for BSD
compatibility, and guarded with __USE_BSD defines, use __tm_gmtoff otherwise.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34307
2012-11-23 20:01:58 +00:00
49cfa54509
grub2: accept the linux-musl* tuple
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34306
2012-11-23 20:01:53 +00:00
6db1b986ed
uboot-lantiq: add new package
...
SVN-Revision: 34305
2012-11-23 18:16:05 +00:00
702f2590ea
uboot-kirkwood: update to 2012.10
...
SVN-Revision: 34303
2012-11-22 21:16:04 +00:00
24a372b6ec
package: kernel: make crypto kmods always visible
...
Don't hide crypo submodules unless crypo-core is selected.
Fixes kmods depending on crypto modules being unselectable
until crypto core is selected (like ext4 on 3.6 or mac80211).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34298
2012-11-22 11:55:18 +00:00
f1498531c7
hostapd: include sys/stat.h for a struct stat definition
...
Some libcs need this header to be explicitely included (e.g: musl)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34295
2012-11-21 20:27:06 +00:00
7453b0dd8e
mtd: do not include error.h
...
We do not use anything from it, and it is not available with all libcs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34294
2012-11-21 20:27:02 +00:00
3df1f9aecd
valgrind: re-categorize from utils to devel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34293
2012-11-21 20:26:58 +00:00
4e733cfbc9
libthread-db: fix libthread_db.so installation.
...
libthread_db.so.$(LIBC_SO_VERSION) is only valid for uClibc, (e)glibc just
provides libthread_db.so.1.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34292
2012-11-21 20:26:55 +00:00
e5effc8c4c
gdb: recategorize from utils to devel in menuconfig
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34291
2012-11-21 20:26:51 +00:00
0ae8453c71
actually deploy atmarp and atmarpd and not just their libtool wrapper
...
due to a small error in the atm-tools package we are not deploying
atmarp/atmarpd but instead the (useless) libtool-wrappers.
Signed-Off-By: Frank Meerkötter <frank@meerkoetter.org>
SVN-Revision: 34287
2012-11-21 06:07:23 +00:00
6c1fbb2d5c
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
a2e71a0bbf
mac80211/rt2x00: support Rt3352 with external PA
...
This is needed for WiFi to work e.g. on DIR-615 rev.H1.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34268
2012-11-20 07:19:08 +00:00
Jo-Philipp Wich
John Crispin
Hauke Mehrtens
Felix Fietkau
Steven Barth
Gabor Juhos
Mirko Vogt
Luka Perkov
Florian Fainelli
Jonas Gorski