76b797c759
mpc85xx: add default profile
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35677
2013-02-19 14:53:17 +00:00
debb9a4a97
mpc85xx: add gpio-keys to OF match table
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35676
2013-02-19 14:53:16 +00:00
69cc70a43c
mpc85xx: enable squashfs feature
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35675
2013-02-19 14:53:15 +00:00
ae9100e969
mpc85xx: add swconfig to default packages
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35674
2013-02-19 14:53:12 +00:00
3081c672fc
6relayd: Fix possible memory corruption issue
...
SVN-Revision: 35673
2013-02-19 12:04:41 +00:00
ed0f43f1e2
kernel: update linux 3.8-rcX to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35672
2013-02-19 09:17:38 +00:00
48bc2fbff3
mac80211: b43: Increase number of RX DMA slots
...
Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G
were due to overflow of the RX DMA ring buffer, which was created with 64
slots. That finding reminded me that I was seeing similar crashed on a netbook,
which also has a relatively slow processor. After increasing the number of
slots to 128, runs on the netbook that previously failed now worked; however,
I found that 109 slots had been used in one test. For that reason, the number
of slots is being increased to 256.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
SVN-Revision: 35671
2013-02-18 20:44:26 +00:00
f5b63ffd33
6relayd: Workaround potential signal handling issue
...
SVN-Revision: 35665
2013-02-18 12:50:36 +00:00
1dd9e661be
x86/rdc: migrate to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35664
2013-02-18 10:38:05 +00:00
677714309b
rb532: migrate platform to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35663
2013-02-18 10:38:02 +00:00
2bfa1ed82c
cobalt: migrate platform to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35662
2013-02-18 10:37:58 +00:00
d7092aceb8
brcm63xx: migrate platform to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35661
2013-02-18 10:37:55 +00:00
5953e79888
au1000: migrate to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35660
2013-02-18 10:37:52 +00:00
15b66e0cbe
ar7: migrate to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35659
2013-02-18 10:37:43 +00:00
90011a99f3
ramips: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35652
2013-02-18 09:56:29 +00:00
32b41c4dd0
cns21xx: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35651
2013-02-18 09:56:28 +00:00
f6691c09c1
ar71xx: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35650
2013-02-18 09:56:27 +00:00
546b336d2d
adm5120: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35649
2013-02-18 09:56:26 +00:00
6c627a266b
base-files: introduce commonly used helper functions for setting leds
...
Currently, most platforms define such helpers in their own diag.sh
implementation with almost identical code. By factoring out the
common ground it's possible to simplify maintainability and
homogenize the haptics over multiple platforms (so far as is
reasonably practicable, in a next step).
[juhosg:
- fix led_set_attr parameters in led_timer
- add led_morse and status_led_set_morse helpers
- add status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35648
2013-02-18 09:56:23 +00:00
c4f14fab9b
base-files: minor cosmetic corrections for functions.sh
...
- update copyright header
- remove superfluous shebang left-over from changeset 34794
- unify function declaration
[juhosg: keep Vertical Communications' copyright notice]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35646
2013-02-17 21:47:03 +00:00
65fc9eee18
Add xz compressed packages to known extensions of dl_cleanup
...
Add .tar.xz, .txz, and .orig.tar.xz as known extensions to dl_cleanup.py.
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35645
2013-02-17 21:37:14 +00:00
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
02b0c62f33
firewall3 - a C implementation of the current firewall scripts
...
SVN-Revision: 35643
2013-02-17 19:26:52 +00:00
451dd745bd
generic: ar8216: cleanup function/variable names
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35642
2013-02-17 12:48:25 +00:00
51996304c4
generic: ar8216: rename struct ar8216_priv to ar8xxx_priv
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35641
2013-02-17 12:48:23 +00:00
4215b1c93c
ar71xx: add user-space support for the Mikrotik RB951G board
...
[juhosg: change rb-951g to rb-951g-2hnd in the scripts]
Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35634
2013-02-17 10:08:41 +00:00
7a709573d7
ar71xx: add kernel support for the Mikrotik RB951G board
...
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.
[juhosg:
- remove dead code from mach-rb951g
- add "-2HnD" suffix to the machine name
- use a separate 615-MIPS-ath79-RB951G-support.patch]
Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35633
2013-02-17 10:08:35 +00:00
1a8218d6e4
brcm47xx: add initial support for kernel 3.8
...
This contains the following new bigger changes:
* new partition parser which still could lake some features or have bugs
* new nand flash driver
* using physmap-flash flash driver for parallel flash
* some changes to the serial flash driver
With these changes OpenWrt starts using more of the mainline flash drivers.
SVN-Revision: 35632
2013-02-16 20:28:24 +00:00
1d6574b9c3
hostapd: fix the scan wait patch for multiple interfaces
...
SVN-Revision: 35630
2013-02-16 19:00:34 +00:00
17c36f540c
ar71xx: fix kmod-usb2 package name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35629
2013-02-16 17:33:06 +00:00
4375dae6d3
ramips: fix kmod-usb2 package name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35628
2013-02-16 17:26:52 +00:00
97e75d03cc
package/kernel: add package for the Freescale On-Chip EHCI Controller
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35627
2013-02-16 17:13:40 +00:00
62e80eba31
mpc85xx: add input drivers to default packages, and load those during preinit
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35626
2013-02-16 17:13:38 +00:00
ce6a7543fe
brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules
...
Adjust the "AutoLoad" number for the BGMAC module to be prior
to the switch modules. This probably isn't real important as
the modules are loaded in the correct order by preinit anyway.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 35625
2013-02-16 16:27:33 +00:00
9de704a03b
brcm47xx: improve cpuport detection for filesafe
...
Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X
Ask the switch driver where the CPU port is.
SVN-Revision: 35624
2013-02-16 16:24:15 +00:00
92d16f38d7
brcm47xx: fix network config on simpleshare
...
The included patch will generate a correct network configuration on the simpletech simpleshare.
Thank you for the patch Will Holmes (RealOpty)
This closes #12361 .
SVN-Revision: 35623
2013-02-16 15:24:48 +00:00
a21ba013f5
brcm47xx: handle return values of cfe_env_get() correctly.
...
This closes #12746 .
SVN-Revision: 35622
2013-02-16 15:19:24 +00:00
283bff02a2
brcm47xx: bgmac: fix unaligned accesses to network headers.
...
SVN-Revision: 35621
2013-02-16 14:38:17 +00:00
99782943d2
hostapd: add back the patch that waits for interface bringup in ht40, it got lost with the update
...
SVN-Revision: 35619
2013-02-16 14:26:03 +00:00
5fed2916c3
brcm47xx: fix unaligned access to mac address
...
The mac address should be aligned to u16 to prevent an unaligned access
in drivers/ssb/pci.c where it is casted to __be16.
This closes #9824 .
SVN-Revision: 35618
2013-02-16 13:46:00 +00:00
d9580d224a
brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0.
...
This should fix #13000 .
SVN-Revision: 35617
2013-02-16 12:37:24 +00:00
7f20c2e19a
update x86 generic to kernel v3.7
...
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35616
2013-02-16 12:12:52 +00:00
7fd8525853
ramips: use the new macaddr_* helpers instead of maccalc
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35615
2013-02-16 11:50:25 +00:00
5a8c63b47e
base-files: add macaddr_{add,2bin,setbit_la} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35614
2013-02-16 11:50:22 +00:00
753d713e92
ramips: use the mtd_get_mac_* helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35613
2013-02-16 11:50:21 +00:00
70d40b2ddd
base-files: add mtd_get_mac_{ascii,binary} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35612
2013-02-16 11:50:19 +00:00
dd77663fb0
kernel: add missing config options
...
r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to
not build with PTP enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35611
2013-02-16 11:39:45 +00:00
c98b12d911
samba36: fix segmentation fault when trying to add non-existent users
...
Based on a patch from НКВД. Closes #12962 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35610
2013-02-16 11:39:42 +00:00
30ccd13c81
hotplug2: depend on libbsd only when targetting eglibc
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35608
2013-02-15 13:25:18 +00:00
f209bf0eb6
libevent2: do not add librt dependency when targetting eglibc
...
This is already taken care of by PKG_DEFAULT_DEPENDS
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35607
2013-02-15 13:25:15 +00:00
Gabor Juhos
Steven Barth
Hauke Mehrtens
Florian Fainelli
Jo-Philipp Wich
Felix Fietkau
Jonas Gorski