Commit Graph

9 Commits (2c5f16ecac58b0ea88afdccc6febe9d39f016a6e)

Author SHA1 Message Date
Daniel Golle 5cde94d9ab oxnas: backport upstream NAND driver
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:58 +01:00
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00
Daniel Golle c773a2c46e oxnas: kd20: generate image compatible with stock firmware
* adjust MTD partitions to match vendor's scheme
 * generate *factory.tar.gz image compatible with stock web-if
   firmware upgrade interface

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-09-04 04:58:36 +02:00
John Crispin 10dbdb28d7 oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
2014-12-13 08:04:54 +00:00
John Crispin 9013a144fd oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
2014-12-13 08:02:52 +00:00
John Crispin 118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
2014-12-12 20:24:33 +00:00
John Crispin 9432cbd577 oxnas: add support for 2nd S-ATA port to sata_oxnas driver
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.

this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43598
2014-12-10 15:51:07 +00:00
John Crispin 46814be2a8 oxnas/kd20: use gpio-beeper
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
2014-12-02 15:25:09 +00:00
John Crispin 72b58f2eb1 add new target 'oxnas'
This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
 PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
 Oxford Semiconductor OXE810SE/OXE815/OX820/...

For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
 fully supported

Cloud Engines Pogoplug Pro (with PCIe)
 fully supported

MitraStar STG-212
 aka ZyXEL NSA-212,
 aka Medion Akoya P89625 / P89636 / P89626 / P89630,
 aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
 fully supported, see http://wiki.openwrt.org/toh/medion/md86587

Shuttle KD-20
 partially supported (S-ATA driver lacks support for 2nd port)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43388
2014-11-26 09:00:08 +00:00