Commit Graph

664 Commits (2c5a5d87363791b7f6221de8fff0ade3be21c0ea)

Author SHA1 Message Date
Gabor Juhos e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
2012-04-06 06:45:07 +00:00
Gabor Juhos b77217d963 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
2012-03-27 19:38:17 +00:00
Gabor Juhos 6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
2012-03-27 19:38:07 +00:00
Gabor Juhos 61ee283899 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
2012-03-27 19:38:05 +00:00
Gabor Juhos 1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
2012-03-27 19:38:04 +00:00
Gabor Juhos 87e4ec687b ar71xx: remove the built-in MTD maps of several boards
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
2012-03-27 19:38:01 +00:00
Gabor Juhos f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
SVN-Revision: 31102
2012-03-27 19:37:51 +00:00
Gabor Juhos 8a2e4b49de ar71xx: add initial support for RB750GL
SVN-Revision: 31025
2012-03-19 15:57:04 +00:00
Gabor Juhos d19f3dd512 ar71xx: make rb750_latch_change 'static void'
SVN-Revision: 31024
2012-03-19 15:57:03 +00:00
Gabor Juhos 5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data
SVN-Revision: 31023
2012-03-19 15:57:01 +00:00
Gabor Juhos 8a471efe01 ar71xx: add platform data for the RB750 NAND driver
SVN-Revision: 31022
2012-03-19 15:56:59 +00:00
Gabor Juhos e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0
SVN-Revision: 31017
2012-03-19 11:11:20 +00:00
Gabor Juhos 6036151187 ar71xx: add support for the jjPlus JA76PF2 board
SVN-Revision: 30957
2012-03-16 18:00:34 +00:00
Gabor Juhos a680662391 ar71xx: change LED name prefix on the jjplus boards
SVN-Revision: 30956
2012-03-16 18:00:26 +00:00
Gabor Juhos 1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration
SVN-Revision: 30922
2012-03-13 17:29:33 +00:00
Gabor Juhos 66df117d1b ar71xx: use a dummy callback for interfaces with fixed speed
SVN-Revision: 30913
2012-03-12 20:38:58 +00:00
Gabor Juhos 8b2b37ae58 ar71xx: merge ar934x_bo_ddr_flush patch
SVN-Revision: 30912
2012-03-12 20:38:57 +00:00
Gabor Juhos 2d89fa7f43 ar71xx: fix WPS button polarity on TL-WR2543N
SVN-Revision: 30849
2012-03-07 19:50:53 +00:00
Gabor Juhos d72bde99cd ar71xx: merge files-3.2 to files
SVN-Revision: 30405
2012-02-10 08:19:31 +00:00
Gabor Juhos 386cbfe45b ar71xx: move arch specific files to files-2.6.39
SVN-Revision: 29867
2012-01-22 22:38:11 +00:00
Gabor Juhos ef1c53b7b7 ar71xx: change board id of the UniFi board
SVN-Revision: 29849
2012-01-22 13:51:50 +00:00
Gabor Juhos fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
SVN-Revision: 29713
2012-01-11 18:00:50 +00:00
Gabor Juhos a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board
The WLAN LEDs are not working yet.

SVN-Revision: 29680
2012-01-07 19:36:35 +00:00
Gabor Juhos 67b2814842 ar71xx: local mac support on the wndr3700
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
2012-01-07 17:24:44 +00:00
Gabor Juhos 1e848b17ad ar71xx: add support for Redwave RW2458N
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
2012-01-06 07:20:59 +00:00
Gabor Juhos b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
2012-01-04 21:13:54 +00:00
Gabor Juhos 923f3e3752 ar71xx: allow to use the command line hack on compex devices
SVN-Revision: 29659
2012-01-04 17:30:58 +00:00
Gabor Juhos 2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
2012-01-04 17:30:57 +00:00
Gabor Juhos 90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
SVN-Revision: 29653
2012-01-04 17:30:50 +00:00
Gabor Juhos 1045c83527 ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
Gabor Juhos 1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards
SVN-Revision: 29635
2012-01-01 19:30:25 +00:00
Gabor Juhos 5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
SVN-Revision: 29631
2011-12-31 15:02:46 +00:00
Gabor Juhos 557009bbdb ar71xx: fix LEDs on the WRT400N
SVN-Revision: 29624
2011-12-31 13:54:11 +00:00
Jo-Philipp Wich ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
SVN-Revision: 29593
2011-12-21 01:27:48 +00:00
Felix Fietkau 11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2
SVN-Revision: 29568
2011-12-19 09:04:15 +00:00
Felix Fietkau 0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
2011-12-18 22:20:17 +00:00
Gabor Juhos 67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
2011-12-15 22:25:38 +00:00
Gabor Juhos 5bbd416e38 ar71xx: add defines for the AR934X GMAC interface
SVN-Revision: 29556
2011-12-15 22:25:36 +00:00
Gabor Juhos e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board
SVN-Revision: 29555
2011-12-15 22:25:35 +00:00
Gabor Juhos 00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
SVN-Revision: 29553
2011-12-15 22:25:30 +00:00
Gabor Juhos e2a546d475 ar71xx: allow to attach the internal switch for AR934x
SVN-Revision: 29550
2011-12-15 22:25:22 +00:00
Gabor Juhos 9ae65588d8 ar71xx: introduce ar71xx_switch_data
SVN-Revision: 29549
2011-12-15 22:25:11 +00:00
Gabor Juhos d1f7783612 ar71xx: fix mac addresses on jjPlus devices
SVN-Revision: 29538
2011-12-15 13:25:18 +00:00
Gabor Juhos b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board
SVN-Revision: 29535
2011-12-14 20:54:10 +00:00
Gabor Juhos 66c8cc0f6d ar71xx: add GPIO function bit defines for AR933X
SVN-Revision: 29534
2011-12-14 20:54:07 +00:00
Felix Fietkau 7076d74b21 ar71xx: fix gpio count for ar7241/ar7242
SVN-Revision: 29532
2011-12-14 20:47:24 +00:00
Felix Fietkau b878f4a927 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
SVN-Revision: 29531
2011-12-14 20:21:42 +00:00
Felix Fietkau 3806671fe5 ar71xx: fix wireless led on wzr-hp-g450h
SVN-Revision: 29515
2011-12-13 15:00:43 +00:00
Gabor Juhos 2dd7dfb1c9 ar71xx: enable AR9341 support at setup.c
Patch-by: dyq <729650915@qq.com>

SVN-Revision: 29514
2011-12-13 14:59:43 +00:00
Gabor Juhos 058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
2011-12-13 14:59:40 +00:00
Felix Fietkau 48f9717371 ar71xx: add gpios and usb for wzr-hp-g450h
SVN-Revision: 29509
2011-12-13 13:33:44 +00:00
Gabor Juhos 4ca2d86493 ar71xx: use RedBoot parser on PB44
SVN-Revision: 29501
2011-12-11 15:52:47 +00:00
Gabor Juhos bdc2eca7de ar71xx: use correct mac on the lan interface on several TP-LINK devices
SVN-Revision: 29458
2011-12-05 21:10:58 +00:00
Gabor Juhos 0103069372 ar71xx: allow to pass negative offset values for ar71xx_init_mac
SVN-Revision: 29457
2011-12-05 21:10:55 +00:00
Gabor Juhos ada92aee62 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set
SVN-Revision: 29456
2011-12-05 18:21:15 +00:00
Felix Fietkau 1f809532de ar71xx: add preliminary support for wzr-hp-g450h
SVN-Revision: 29441
2011-12-05 14:20:51 +00:00
Felix Fietkau d1f63f8538 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well
SVN-Revision: 29440
2011-12-05 14:20:44 +00:00
Gabor Juhos 4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling
SVN-Revision: 29434
2011-12-05 13:03:54 +00:00
Gabor Juhos 7cfa39f032 ar71xx: use the tp-link parser on the tp-link boards
Also remove static partition maps.

SVN-Revision: 29416
2011-12-03 18:13:31 +00:00
Gabor Juhos fc7fb29bae ar71xx: run the RedBoot parser only on the RedBoot based boards
SVN-Revision: 29414
2011-12-03 18:13:25 +00:00
Gabor Juhos 9cc28d5aa0 ar71xx: run the MyLoader parser only on the WP543 board
SVN-Revision: 29413
2011-12-03 18:13:23 +00:00
Gabor Juhos 67a0b9aada ar71xx: run the wrt160nl parser only on the WRT160NL board
Also remove static mtd partition definitions.

SVN-Revision: 29412
2011-12-03 18:13:20 +00:00
Gabor Juhos f188f1bad5 ar71xx: add support for Ubiquiti AirRouter
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
2011-12-01 22:49:02 +00:00
Gabor Juhos f20797306a ar71xx: modify phy mask of the WP543 board
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
2011-11-24 20:09:43 +00:00
Gabor Juhos c20d7378e5 ar71xx: fix wndr3800 machine name
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
2011-11-24 20:09:38 +00:00
Gabor Juhos 9990523a0f ar71xx: set GE0 phy_mask for AR933x
SVN-Revision: 29274
2011-11-20 11:30:10 +00:00
Gabor Juhos f27548448b ar71xx: fix USB LED on the DB120 board
SVN-Revision: 29126
2011-11-14 17:43:15 +00:00
Gabor Juhos 6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin
SVN-Revision: 29125
2011-11-14 17:43:14 +00:00
Gabor Juhos 0c1d3617d7 ar71xx: fix GPIO function handling on AR934x
SVN-Revision: 29124
2011-11-14 17:43:13 +00:00
Gabor Juhos aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
SVN-Revision: 29123
2011-11-14 17:43:11 +00:00
Gabor Juhos 12dae96097 ar71xx: fix a compiler warning
SVN-Revision: 29110
2011-11-14 13:07:47 +00:00
Gabor Juhos 5ae0fd802c ar71xx: fix GPIO count for AR934x
SVN-Revision: 29109
2011-11-14 13:07:45 +00:00
Gabor Juhos e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
2011-11-14 11:49:53 +00:00
Gabor Juhos 3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
2011-11-14 11:49:51 +00:00
Gabor Juhos 42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
2011-11-14 11:49:49 +00:00
Gabor Juhos c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
2011-11-14 11:49:47 +00:00
Gabor Juhos cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
2011-11-14 07:38:09 +00:00
Gabor Juhos defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
2011-11-14 07:38:07 +00:00
Gabor Juhos 6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
2011-11-14 07:38:05 +00:00
Gabor Juhos 368bbc510b ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
2011-11-13 17:36:36 +00:00
Gabor Juhos 15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
2011-11-13 12:48:03 +00:00
Gabor Juhos f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
2011-11-13 12:48:01 +00:00
Gabor Juhos d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
2011-11-13 11:27:03 +00:00
Gabor Juhos 538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
2011-11-13 11:26:59 +00:00
Gabor Juhos 93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.

SVN-Revision: 29012
2011-11-13 11:26:57 +00:00
Gabor Juhos 9579bb4267 ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
2011-11-13 11:26:56 +00:00
Gabor Juhos da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
2011-11-13 11:26:54 +00:00
Gabor Juhos 5ad763075e ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
2011-11-12 12:50:20 +00:00
Gabor Juhos 4555be2bec ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
2011-11-12 12:50:19 +00:00
Gabor Juhos 368c6605a0 ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
2011-11-12 12:50:18 +00:00
Gabor Juhos 21d317b9cc ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
2011-11-12 12:50:16 +00:00
Gabor Juhos aff0c84ffa ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
2011-11-12 12:09:59 +00:00
Gabor Juhos b144249108 ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
2011-11-12 12:09:56 +00:00
Gabor Juhos f835106c8c ar71xx: add a secondary mdio bus
SVN-Revision: 28984
2011-11-12 12:09:54 +00:00
Gabor Juhos 90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
2011-11-12 12:09:50 +00:00
Gabor Juhos 9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
2011-11-12 12:09:48 +00:00
Gabor Juhos b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
SVN-Revision: 28981
2011-11-12 12:09:42 +00:00
Gabor Juhos a9216bb76e ar71xx: add AR934x specific USB setup
SVN-Revision: 28980
2011-11-12 10:54:20 +00:00
Gabor Juhos 346e44105a ar71xx: register the first ethernet interface on the DB120 board
SVN-Revision: 28979
2011-11-12 10:54:18 +00:00
Gabor Juhos b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X
SVN-Revision: 28978
2011-11-12 10:54:17 +00:00
Gabor Juhos e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits
SVN-Revision: 28976
2011-11-12 10:54:15 +00:00
Gabor Juhos d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x
SVN-Revision: 28974
2011-11-12 10:54:09 +00:00
Gabor Juhos 43e993e5f5 ar71xx: fix AR934X clock frequency calculation
SVN-Revision: 28973
2011-11-12 10:54:08 +00:00
Gabor Juhos a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board
SVN-Revision: 28805
2011-11-07 12:59:10 +00:00
Gabor Juhos 4509af17ed ar71xx: add support for the Buffalo WHR-G301N board
SVN-Revision: 28803
2011-11-07 12:59:07 +00:00
Gabor Juhos 4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions
SVN-Revision: 28800
2011-11-07 12:59:03 +00:00
Gabor Juhos 4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4
SVN-Revision: 28709
2011-11-01 14:38:12 +00:00
Gabor Juhos 91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
2011-11-01 11:20:52 +00:00
Gabor Juhos 21e651c9a1 ar71xx: add AR933X GMAC register defines
SVN-Revision: 28705
2011-11-01 11:20:50 +00:00
Gabor Juhos f372620ffa ar71xx: unify LED names on Planex boards
SVN-Revision: 28703
2011-11-01 11:20:47 +00:00
Gabor Juhos 66ab406d5a ar71xx: unify LED names on Buffalo boards
SVN-Revision: 28702
2011-11-01 11:20:46 +00:00
Gabor Juhos e7586959df ar71xx: unify LED names on TP-Link boards
SVN-Revision: 28701
2011-11-01 11:20:44 +00:00
Gabor Juhos 1646346798 ar71xx: add initial support for the OpenMesh OM2P board
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
2011-10-27 07:54:51 +00:00
Gabor Juhos d02f22fea1 ar71xx/all0258n: fix partition layout
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
2011-10-27 07:54:47 +00:00
Gabor Juhos 9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
Gabor Juhos d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
Jonas Gorski a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
Gabor Juhos 6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board
Patch-by: Lukas Kuna

SVN-Revision: 28295
2011-09-23 19:56:39 +00:00
Gabor Juhos 733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
Gabor Juhos d3617ac7d3 ar71xx: add AR933x specific USB setup function
SVN-Revision: 28276
2011-09-21 11:47:51 +00:00
Gabor Juhos 91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper
SVN-Revision: 28275
2011-09-21 11:47:50 +00:00
Gabor Juhos 079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries
SVN-Revision: 28273
2011-09-21 11:47:47 +00:00
Gabor Juhos 73dac07c44 ar71xx: sort AR71XX_MACH_* entries
SVN-Revision: 28272
2011-09-21 11:47:45 +00:00
Felix Fietkau 65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037)
SVN-Revision: 28182
2011-09-06 05:38:23 +00:00
Felix Fietkau cd2c68501c ar71xx: fix ethernet PLL setting on ar7242
SVN-Revision: 28124
2011-08-29 21:23:46 +00:00
Felix Fietkau 12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240
SVN-Revision: 27975
2011-08-13 22:30:14 +00:00
Felix Fietkau d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922)
SVN-Revision: 27959
2011-08-11 13:52:40 +00:00
Jonas Gorski e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Felix Fietkau 9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh
SVN-Revision: 27756
2011-07-24 14:40:35 +00:00
Felix Fietkau 1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
Felix Fietkau 9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684)
SVN-Revision: 27739
2011-07-24 08:02:20 +00:00
Felix Fietkau fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x
SVN-Revision: 27703
2011-07-20 12:04:34 +00:00
Gabor Juhos f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
The config option has been removed in 2.6.39.

SVN-Revision: 27320
2011-06-30 12:15:33 +00:00
Gabor Juhos d98476c6bd ar71xx: merge 2.6.39 patches
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
2011-06-29 08:57:37 +00:00
Gabor Juhos 1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type
SVN-Revision: 27309
2011-06-29 08:57:30 +00:00
Gabor Juhos 055e317ed8 ar71xx: add separate handlers for IP3 interrupts
SVN-Revision: 27308
2011-06-29 08:57:29 +00:00
Gabor Juhos 59bff8bf18 ar71xx: use separate handlers for IP2 interrupts
SVN-Revision: 27307
2011-06-29 08:57:28 +00:00
Gabor Juhos 9d6af600e1 ar71xx: remove useless irq_desc.status initializations
SVN-Revision: 27306
2011-06-29 08:57:27 +00:00
Felix Fietkau ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608)
SVN-Revision: 27282
2011-06-25 13:48:47 +00:00
Gabor Juhos e6af77a1c8 ar71xx: cleanup AR933X UART driver
SVN-Revision: 27222
2011-06-19 13:17:51 +00:00
Gabor Juhos 066e04d497 ar71xx: fix uart clock frequency for AR933X
SVN-Revision: 27221
2011-06-19 13:17:50 +00:00
Gabor Juhos b58ede16a5 ar71xx: update early_printk code
SVN-Revision: 27165
2011-06-13 08:12:38 +00:00
Gabor Juhos ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards
SVN-Revision: 27101
2011-06-04 12:30:09 +00:00
Gabor Juhos 750af1522b ar71xx: init external_reset for AR933X
SVN-Revision: 27083
2011-06-01 13:12:30 +00:00
Gabor Juhos f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1
SVN-Revision: 27081
2011-06-01 13:12:27 +00:00
Gabor Juhos 34ff32a6eb ar71xx: export SoC revision
SVN-Revision: 27079
2011-06-01 13:12:24 +00:00
Felix Fietkau 4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h
SVN-Revision: 27075
2011-06-01 02:23:26 +00:00
Gabor Juhos f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards
SVN-Revision: 27067
2011-05-31 22:53:43 +00:00
Gabor Juhos 8beff081eb ar71xx: register UART for the AR933X SoCs
SVN-Revision: 27066
2011-05-31 22:53:42 +00:00
Gabor Juhos b460bc6f12 ar71xx: add serial driver for the AR933X UART
SVN-Revision: 27065
2011-05-31 22:53:40 +00:00