Commit Graph

35084 Commits (2adc6468bf4537f75a519dbe3c082268b0d038a6)

Author SHA1 Message Date
John Crispin 2adc6468bf ipq806x: build Linksys EA8500 images
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
Adrian Panella bdaf558134 ipq806x: qcom rpm fix support for smb208
In commit "regulator: qcom: Rework to single platform device" the smb208
regulator used in IPQ8064 was left out.

Add it to that new framework and update Docs and DT accordingly.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
John Crispin 928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Adrian Panella 2177a2a8cb mtd: add linksys_bootcount for ipq806x
Reset bc is needed for Linksys EA8500's dual boot.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Adrian Panella c354591d1b mac80211: ath10k fix otp check patch
Fix patch to match new updated package version

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
John Crispin b50b0cff2d lantiq: use new property name for eiu irqs
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
John Crispin d61af50cf3 lantiq: fix a regression in the eiu irq loading code
this worked in 3.18 but broke at some point. the old code that loaded a
irq table was incorrewct anyhow as it mapped the irqs int he domain which
should really be done when the driver using them loads them and not the
irq driver itself.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
John Crispin 027da34957 lantiq: add default lan setup to board.d script
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
John Crispin 62dc9831d3 package/*: update git urls for project repos
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
Rafał Miłecki 399d214d05 oseama: support extracting entity
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-13 22:53:07 +02:00
Rafał Miłecki cb0de9a68e bcm53xx: sysupgrade: move TRX specific code to separated function
This will allow adding support for other formats (e.g. Seama) in a clean
way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-13 22:52:04 +02:00
Felix Fietkau 1beb5bec64 ar71xx: enable flow control for ethernet MACs with built-in switch
Should fix LAN speed issues on some devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00
Felix Fietkau c536da365b lantiq: add VLAN handling fixes to xrx200 ethernet driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00
Felix Fietkau 172eebbd28 lantiq: fold 0400-xrx200-net-multi-phy.patch into 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00
Pavel Kubelun 233ec51217 ath10k-firmware: add QCA9984 firmware
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-13 12:49:34 +02:00
Stefan Sydow 5610afe203 sparse: update to support llvm 3.5.0
sparse-0.5.0 won't link against lvm 3.5.0 as "llvm-config --libs" does not
include system libs like pthreads. This problem got fixed but not released
yet, so we need to fetch from their git repo.

Signed-off-by: Stefan Sydow <stefan.sydow@tu-berlin.de>
2016-06-13 12:49:34 +02:00
Álvaro Fernández Rojas 0aa6c7df60 kernel: update kernel 4.4 to version 4.4.13
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-12 15:51:54 +02:00
Felix Fietkau 1da87516e5 lantiq: change xrx200 ethernet driver WRED signal to global to fix spurious packet loss issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau 704965d93f uboot-envtools: add config for WBMR300 (lantiq)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau 37cfc23cb7 kernel: require admin permissions for swconfig set operations
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 12:03:20 +02:00
Felix Fietkau fecd715ef8 kernel: merge pending fq_codel backlog accounting fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Felix Fietkau df7af9317b ath10k: merge some pending stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Felix Fietkau 69c99a423a lantiq: enable swconfig LED support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau cc3bfdb62f lantiq: enable SMP for XRX200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau 2d48f93ff4 lantiq: add Buffalo WBMR-300HPD support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau cc87d144e1 lantiq: refresh xrx200 kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau 2cf67832ec lantiq: remove dummy ltq_machine_power_off to fix gpio-poweroff drivers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau eed2f24c0d kernel: fix mips MT_SMP kernel crash on cache flush
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Jo-Philipp Wich 9e45f9d63c polarssl: enable AES-GCM and CAMELLIA-GCM ciphersuites
Recent versions of Chrome require this ciphers to successfully handshake with
a TLS enabled uhttpd server using the ustream-polarssl backend.

If `CONFIG_GCM` is disabled, `ssl_ciphersuite_from_id()` will return `NULL`
when cipher `0x9d` is looked up, causing the calling `ssl_ciphersuite_match()`
to fail with `POLARSSL_ERR_SSL_INTERNAL_ERROR`.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-11 03:24:57 +02:00
Rafał Miłecki 1f86257c2f bcm53xx: pass datasize to mtd in hexadecimal format
This avoids extra calculation in bash script.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:38:00 +02:00
Rafał Miłecki 4b03e4ac3b mtd: fix typo in error message for 'c' option
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:37:49 +02:00
Rafał Miłecki c40e96d133 bcm53xx: fix partition typos in 09_fix_crc
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:37:41 +02:00
Jo-Philipp Wich 442db0d6d8 kernel: deny swconfig set requests for unprivileged users
The swconfig kernel infrastructure fails to do any permissions checks when
changing settings. As such an ordinary user account on a device with a
switch can change switch settings without any special permissions.
Routers generally have few non-admin users so this isn't a big hole, but it
is a security hole. Likely the greatest danger is for multifunction devices
which have a lot of extra daemons, compromising a low-security daemon would
allow one to modify switch settings and cause the router/switch to appear to
lock-up (or cause other sorts of troublesome nyetwork behavior).

Implement a check for CAP_NET_ADMIN in swconfig_set_attr() and deny any
requests originating from user contexts lacking this capability.

Reported-by: Elliott Mitchell <ehem+openwrt@m5p.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-11 00:53:19 +02:00
Jo-Philipp Wich dd182011e1 swconfig: improve failure reporting
Report the translated error to the user if a get/set netlink operation failed.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-11 00:51:22 +02:00
Kevin Darbyshire-Bryant e815036460 dnsmasq: support hostid ipv6 address suffix option
Add support for hostid dhcp config entry to dnsmasq. This allows
specification of dhcpv6 hostid suffix and works in the same way as
odhcpd.

Entries in auto generated dnsmasq.conf should conform to:

dhcp-host=mm:mm:mm:mm:mm:mm,IPv4addr,[::V6su:ffix],hostname

example based on sample config/dhcp entry:

config host
        option name 'Kermit'
        option mac 'E0:3F:49:A1:D4:AA'
        option ip '192.168.235.4'
        option hostid '4'

dhcp-host=E0:3F:49:A1:D4:AA,192.168.235.4,[::0:4],Kermit

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-10 18:16:47 +02:00
Scott Shambarger 4b8f0a2d26 mac80211: fix calculation of VHT capability values
- Fix calculation of `$vht_cap` bit field
 - Replace wrong reference to `$tx_stbc` variable with proper `$tx_stbc_2by1` one
 - Emit proper `RX-STBC-{1,12,123,1234}` tokens for the VHT capability list

See https://dev.openwrt.org/ticket/22535 for reference.

Signed-off-by: Scott Shambarger <devel@shambarger.net>
2016-06-10 18:08:30 +02:00
Hans Dedecker 96db69bd45 busybox: Call ntpd hotplug script for every action
Daemons that are waiting for a timesync are only triggered when the action is stratum.
As step is the first sync action pass all actions to the ntpd hotplug scripts; it's up
to the ntpd hotplugscript to filter out the actions it is interested in.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-06-10 18:05:08 +02:00
Hans Dedecker 7eaacd4d23 dnsmasq: Add option --max-port
By default dnsmasq uses random ports for outbound dns queries;
when the maxport UCI option is specified the ports used will
always be smaller than the specified value.
This is usefull for systems behind firewalls.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-06-10 18:05:07 +02:00
Rafał Miłecki 95d8568cb8 bcm53xx: calculate TRX CRC32 using whole kernel partition
This provides better protection of flash data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-10 12:58:19 +02:00
Felix Fietkau 13ea815b6c mvebu: add a patch to deal with excessive latencies/delays during flash PIO command processing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-10 10:47:40 +02:00
Felix Fietkau a88fc0db9d xtables-addons: add missing dependency
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-09 15:53:43 +02:00
Hannu Nyman efa740b08b ubox: increase default size of system log buffer to 64 kB
Increase the default system log buffer size
from 16 kB (default both in logd source and in the startup script)
to 64 kB by adjusting the default value in startup script.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-06-07 23:13:29 +02:00
Hannu Nyman df7581e4c0 base-files: increase default system log size to 64 kB
Increase the default system log buffer size
from 16 kB (built-in default in ubox logd)
to 64 kB by setting the option in /etc/config/system.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-06-07 23:13:29 +02:00
Álvaro Fernández Rojas 0691a172d0 brcm2708: fix another missing kmod dependency
kmod-sound-soc-digidac1-soundcard is also missing snd-soc-wm8804 dependency
for snd-soc-wm8804-i2c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-09 00:14:26 +02:00
Álvaro Fernández Rojas 09f0850ba8 brcm2708: fix missing dependency found by buildbot
Add missing dependency to kmod-sound-soc-adau1977-adc.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-09 00:08:20 +02:00
Álvaro Fernández Rojas 3fc661a98c brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Also alphabetically order sound-soc kernel packages.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 21:23:21 +02:00
Álvaro Fernández Rojas c17f02d2f2 brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 19:09:58 +02:00
Álvaro Fernández Rojas ece009dbf1 brcm2708: take over maintainership
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 19:08:02 +02:00
Jo-Philipp Wich 67f0c93e28 kernel: add missing config symbols for 4.4
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 14:50:26 +02:00
Jo-Philipp Wich 35b33f0413 base-files: maintain LED config state
Record the state of any hardware LED configured through UCI and use that
information to revert the state when applying updated settings while
maintaining default behaviour of system LEDs.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 10:34:50 +02:00