29653782a9
set DEFAULT_SUBTARGET for lantiq/
...
SVN-Revision: 27445
2011-07-04 11:21:47 +00:00
04fefa4a28
fix broken falcon patches from last night
...
SVN-Revision: 27441
2011-07-04 07:50:34 +00:00
e9c8218375
ramips: create factory image for DIR-300-B1
...
SVN-Revision: 27439
2011-07-04 06:48:45 +00:00
7afed2d86c
ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650 )
...
SVN-Revision: 27434
2011-07-04 03:03:34 +00:00
cd8166f3fd
AT91: flexibity: add system uci file
...
SVN-Revision: 27413
2011-07-03 18:55:57 +00:00
349e97f879
AT91: Add flexibity board support
...
The patch below adds AT91 Flexibity Connect board support.
Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>
SVN-Revision: 27412
2011-07-03 18:51:59 +00:00
2975f0aaf1
alix2: add/subtract features as needed
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27411
2011-07-03 17:39:24 +00:00
0a8430bfab
use netif_receive_skb on lantiq
...
Signed-off-by: Luca Olivetti <luca@ventoso.org>
SVN-Revision: 27410
2011-07-03 17:39:05 +00:00
058eca0b3b
automatic subtarget enumaration
...
SVN-Revision: 27407
2011-07-03 17:38:23 +00:00
43771202d3
update lantiq/falcon patches
...
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
d43cbe24a5
fix description for lantiq target
...
SVN-Revision: 27405
2011-07-03 17:37:57 +00:00
6e7b802297
ramips: merge 2.6.39 patches
...
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
646f64d389
ramips: remove 2.6.37 stuff
...
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
2fc6be00f4
ramips: switch to 2.6.39.2
...
SVN-Revision: 27397
2011-07-03 15:02:07 +00:00
0fde070cf9
ramips: add 2.6.39 support
...
Based on the patches from #9625
SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
c8010517d5
ramips: add hotplug script to extract eeprom for the rt2x00 driver
...
SVN-Revision: 27393
2011-07-03 15:02:01 +00:00
3334d0604e
ramips: specify eeprom file name on RT305X
...
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
f53cc4c439
ramips: specify eeprom file name on RT288X
...
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
129217e127
generic: add rt2x00_platform.h
...
SVN-Revision: 27390
2011-07-03 15:01:57 +00:00
521e495f4b
ramips: add all supported boards to lib/ramips.sh
...
SVN-Revision: 27389
2011-07-03 15:01:56 +00:00
6f54df889a
ramips: check the size of the uImage in image generation
...
SVN-Revision: 27388
2011-07-03 15:01:55 +00:00
575a5286c8
ramips: use lowercase partiion names on the WCR150GN board
...
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
31facf0b75
ramips: use different partition names in the DIR-300-B1 image
...
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
dbe55f08f0
ramips: force word write on flashes with AMD cmdset ( #9252 )
...
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
f1cf43d468
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
641c87b127
ramips: consistently use 'firmware' name for sysupgrade partitions
...
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
381d7f05af
ramips: fix a section mismatch warning
...
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
16ad91d69f
ramips: remove unused include from the common GPIO code
...
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
c9f3e7082f
ramips: disable watchdog on sysupgrade
...
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
e70e6f6848
ramips: swap target check in image generation
...
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
affb57ee27
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
3099ffe414
ramips: set cp0_perfcount_irq for RT305X
...
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
f9f3ddebe8
target/patches: This has been sent upstream, but might not appear for a couple of weeks.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27373
2011-07-03 03:20:04 +00:00
b0cc0067f9
target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27371
2011-07-03 03:14:53 +00:00
f2d749ee15
Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
...
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.
SVN-Revision: 27370
2011-07-03 03:14:51 +00:00
209a776f22
Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27369
2011-07-03 03:14:48 +00:00
88dcf8629d
The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
...
Include this on Geos.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27368
2011-07-03 02:59:00 +00:00
b3a89652a5
ar71xx: use 4k image only for the AP121 board
...
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.
SVN-Revision: 27357
2011-07-02 08:37:59 +00:00
ea8440f4c3
cns21xx belongs to the Econa family, too
...
SVN-Revision: 27354
2011-07-02 08:31:25 +00:00
535cae8393
mark it broken
...
SVN-Revision: 27349
2011-07-02 07:26:04 +00:00
701543d3ef
revert r27043 ( #9513 )
...
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
1edef5ec98
revert r27341, it introduce wrong behaviour for other models
...
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
3b3103b2f1
turn status LED off if device finished initializing
...
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
0ba94475c9
upgrade avr32 u-boot to 2011.06
...
SVN-Revision: 27330
2011-07-01 11:32:01 +00:00
84c89fb02d
upgrade to 2.6.39.2
...
SVN-Revision: 27329
2011-07-01 11:31:08 +00:00
b655c7c85a
preliminary 3.0 support
...
SVN-Revision: 27328
2011-07-01 08:15:48 +00:00
8222c7bb24
add missing kernel symbols
...
SVN-Revision: 27327
2011-07-01 08:11:16 +00:00
a41f80bca1
fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198 )
...
SVN-Revision: 27322
2011-07-01 03:20:13 +00:00
f9e4619b97
ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
...
The config option has been removed in 2.6.39.
SVN-Revision: 27320
2011-06-30 12:15:33 +00:00
8976fa2622
brcm47xx: deactivate wndr3400 for now as this device will not boot
...
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
d98476c6bd
ar71xx: merge 2.6.39 patches
...
Also remove the old UART driver for ar933x.
SVN-Revision: 27314
2011-06-29 08:57:37 +00:00
74a88749f3
ar71xx: remove 2.6.37 support as well
...
SVN-Revision: 27313
2011-06-29 08:57:36 +00:00
1d5378f588
ar71xx: remove 2.6.38 support
...
SVN-Revision: 27312
2011-06-29 08:57:34 +00:00
36e7a8b33e
ar71xx: switch to 2.6.39
...
SVN-Revision: 27311
2011-06-29 08:57:33 +00:00
6627574e57
ar71xx: add 2.6.39 support
...
SVN-Revision: 27310
2011-06-29 08:57:32 +00:00
1e138098cd
ar71xx: remove ar71xx_gpio_irq_set_type
...
SVN-Revision: 27309
2011-06-29 08:57:30 +00:00
055e317ed8
ar71xx: add separate handlers for IP3 interrupts
...
SVN-Revision: 27308
2011-06-29 08:57:29 +00:00
59bff8bf18
ar71xx: use separate handlers for IP2 interrupts
...
SVN-Revision: 27307
2011-06-29 08:57:28 +00:00
9d6af600e1
ar71xx: remove useless irq_desc.status initializations
...
SVN-Revision: 27306
2011-06-29 08:57:27 +00:00
01ac07c9b3
generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0
...
SVN-Revision: 27305
2011-06-29 08:57:25 +00:00
8c62c5d109
brcm47xx: generate image to flash on Netgear WNDR3400.
...
The image will not boot because serial flash support is missing this is only for experts.
SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
4c18da3df6
brcm47xx: add initial support for devices with bcma bus.
...
Ethernet and wifi are not working and this is highly experimental.
SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
3f0eed15a2
kernel: refresh patches for kernel 3.0-rc5
...
SVN-Revision: 27300
2011-06-28 20:25:39 +00:00
2af4f6f634
kernel: update ssb and bcma to linux-next next-20110628
...
SVN-Revision: 27299
2011-06-28 19:33:50 +00:00
c5821c1a3a
kernel: update kernel to 2.6.39.2
...
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
e80ebb769f
ethernet cleanup and sata fix - thanks, Chris
...
SVN-Revision: 27297
2011-06-28 06:54:20 +00:00
4c392185a6
brcm47xx: update kernel to version 2.6.39
...
SVN-Revision: 27296
2011-06-27 21:29:20 +00:00
ca979845cc
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
e439de144f
brcm47xx: fix Linux-3.0 and fix clock rate detection.
...
SVN-Revision: 27294
2011-06-27 20:20:11 +00:00
c1873c46b8
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27293
2011-06-27 20:18:49 +00:00
2c6bd71767
remove remaining uci-defaults
...
SVN-Revision: 27291
2011-06-27 01:42:31 +00:00
9f63b7326f
geos: deprecate uci-defaults files
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 27287
2011-06-25 22:05:10 +00:00
1f6047496e
alix2: add config files for bridging
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 27286
2011-06-25 22:05:05 +00:00
3f40c0f7df
remove gpiodev, prefer sysfs gpio
...
SVN-Revision: 27284
2011-06-25 19:26:17 +00:00
cc56af716c
ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 )
...
SVN-Revision: 27283
2011-06-25 13:54:42 +00:00
ed7f41792a
ar71xx: bring up secondary radio on wzr-hp-ag300h ( fixes #9608 )
...
SVN-Revision: 27282
2011-06-25 13:48:47 +00:00
85d29f3cd0
add missing linux-3.0 config symbol
...
SVN-Revision: 27269
2011-06-24 11:43:30 +00:00
f6e4eb15bc
register SSB sprom after ethernet devices
...
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.
SVN-Revision: 27258
2011-06-22 12:32:03 +00:00
5a76c6bdd7
fix tab damage in 141-led_count.patch
...
SVN-Revision: 27254
2011-06-21 20:52:58 +00:00
3f0f8d9c87
fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
1c0d5f5ae2
kernel: refresh patches for kernel 3.0-rc4
...
SVN-Revision: 27247
2011-06-21 18:39:47 +00:00
9bdf6abb9d
use macros to generate SPI registers table and switches
...
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
6cb3195b40
fix usb mis-cleanup after r27162 ( #9581 )
...
SVN-Revision: 27243
2011-06-20 10:04:53 +00:00
70fb318a90
Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
...
SVN-Revision: 27241
2011-06-19 23:05:21 +00:00
9cd64fa754
generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish).
...
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27237
2011-06-19 22:48:53 +00:00
ab74628c10
dev-spi.c checks for running CPU, not board code
...
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
4dd4cbeb43
fixup patches after r27234
...
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
7819b530da
remove accidental bcm6345 related patches
...
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
12db3df666
remove support for 2.6.37 and 2.6.38
...
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
6bb0a608dc
switch to 2.6.39
...
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
bcada2640b
remove 2.6.35 and 2.6.32 support
...
SVN-Revision: 27230
2011-06-19 20:09:40 +00:00
67d0ca0b4b
remove pre 2.6.39 patches and config
...
SVN-Revision: 27229
2011-06-19 20:09:00 +00:00
34db3f9f86
remove 2.6.37 patches and config
...
SVN-Revision: 27228
2011-06-19 20:07:26 +00:00
e6af77a1c8
ar71xx: cleanup AR933X UART driver
...
SVN-Revision: 27222
2011-06-19 13:17:51 +00:00
066e04d497
ar71xx: fix uart clock frequency for AR933X
...
SVN-Revision: 27221
2011-06-19 13:17:50 +00:00
47e218c426
brcm47xx: refresh patches
...
SVN-Revision: 27219
2011-06-18 15:53:14 +00:00
79a7343560
kernel: update to kernel 2.6.38.8
...
SVN-Revision: 27218
2011-06-18 15:52:15 +00:00
75f9e0c615
brcm47xx: add support for kernel 3.0
...
SVN-Revision: 27217
2011-06-18 15:24:44 +00:00
710409740e
ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box.
...
SVN-Revision: 27202
2011-06-17 11:22:22 +00:00
b97459eb88
add missing USBIP_CORE item in config-3.0
...
SVN-Revision: 27195
2011-06-16 14:34:50 +00:00
540b838998
allow any console to be used
...
SVN-Revision: 27193
2011-06-16 14:34:44 +00:00
426dccd019
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
235e331987
linux/generic: Add support for 3.0-rc3
...
Also make linux identify itself properly as 3.0, not 3.0.0.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27191
2011-06-15 21:31:01 +00:00
bf64ac730a
bcm47xx: Remove kernel checks from image Makefile
...
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
5752efdadd
2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined.
...
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27182
2011-06-15 18:18:32 +00:00
dcddcfca24
add missing kernel config symbols for usb on powerpc
...
SVN-Revision: 27181
2011-06-15 18:07:26 +00:00
d39379296c
backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code)
...
SVN-Revision: 27179
2011-06-15 14:11:33 +00:00
14913ab8b0
revert r26997, it does not apply against 2.6.36.4
...
SVN-Revision: 27178
2011-06-15 13:51:57 +00:00
685a61eb6c
switch to 2.6.39
...
SVN-Revision: 27175
2011-06-14 20:05:13 +00:00
0fb8884efe
fix diag.sh with qube2 front led
...
SVN-Revision: 27174
2011-06-14 20:05:09 +00:00
dee0010ae2
resync kernel config
...
SVN-Revision: 27173
2011-06-14 20:05:03 +00:00
0732b2db78
Fix for bug where the iniatialisation of the MAC data private strucure
...
is copied into the wrong location.
Ticket #9547
Signed-off-by: Conor O'Gorman <conor at dna.ie>
SVN-Revision: 27172
2011-06-13 22:37:23 +00:00
7a96525a6f
replace unfortify patch with a better one
...
Thanks to Richard Weinberger for providing this patch
SVN-Revision: 27168
2011-06-13 12:45:12 +00:00
b7e016ba42
ar71xx: use ar933x_uart.h in the AR933X serial driver
...
SVN-Revision: 27166
2011-06-13 08:12:40 +00:00
b58ede16a5
ar71xx: update early_printk code
...
SVN-Revision: 27165
2011-06-13 08:12:38 +00:00
6a5112a750
cleanup files using checkpatch.pl
...
SVN-Revision: 27162
2011-06-12 19:17:57 +00:00
fa59bb0958
* move patches around * add basic support for gigaset sx76x
...
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
70106f153d
Remove trailing spaces, convert spaces to tabs
...
SVN-Revision: 27153
2011-06-09 19:30:50 +00:00
e3e2a170cd
we dont need 1024 bytes buffer. 128 bytes is enough.
...
SVN-Revision: 27143
2011-06-09 07:08:54 +00:00
8329ecf92c
* revert accidental config change
...
SVN-Revision: 27142
2011-06-09 05:10:18 +00:00
ed0e649a5b
* fixes spi flash for ar9
...
* adds limited support for netgear dgn3500 (enough for others to start working with)
SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
9160e06af5
ar71xx: override inittab to enable login on ttyATH0
...
SVN-Revision: 27128
2011-06-07 17:07:10 +00:00
e7b6721f4e
update to 2.6.39.1
...
SVN-Revision: 27114
2011-06-04 18:27:14 +00:00
d97f50b69b
define UIMAGE for various rootfs targets
...
SVN-Revision: 27113
2011-06-04 18:27:09 +00:00
429745edd6
use IMG_PREFIX for image name
...
SVN-Revision: 27112
2011-06-04 18:27:04 +00:00
4aaf590909
add more config symbols to 2.6.39
...
SVN-Revision: 27111
2011-06-04 18:27:00 +00:00
89dd8aed1f
update to 2.6.39.1
...
SVN-Revision: 27110
2011-06-04 18:26:54 +00:00
72996d2dcb
update to 2.6.39.1
...
SVN-Revision: 27107
2011-06-04 13:36:09 +00:00
20c0427132
update to 2.6.39.1
...
SVN-Revision: 27106
2011-06-04 13:36:05 +00:00
de2e05b6f2
add some missing 2.6.39 config symbols
...
SVN-Revision: 27105
2011-06-04 13:36:00 +00:00
763b58c30c
update to 2.6.39.1
...
patch from Peter Wagner
SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
13363d9129
ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27102
2011-06-04 12:30:10 +00:00
ae2cbfa1e8
ar71xx: select the internal antenna by default on the ZCN-1523H boards
...
SVN-Revision: 27101
2011-06-04 12:30:09 +00:00
0de25d1263
update to 2.6.39
...
SVN-Revision: 27090
2011-06-02 13:45:20 +00:00
31dd60689e
Revert "ar71xx: only enable the rx engine after the link is up..."
...
It messes up the DMA state when the link goes down
SVN-Revision: 27088
2011-06-01 18:15:43 +00:00
750af1522b
ar71xx: init external_reset for AR933X
...
SVN-Revision: 27083
2011-06-01 13:12:30 +00:00
af4cae4498
ar71xx: add external_reset field to ath9k_platform_data
...
SVN-Revision: 27082
2011-06-01 13:12:28 +00:00
f0c7b93e5d
ar71xx: init get_mac_revision on AR9330 rev 1
...
SVN-Revision: 27081
2011-06-01 13:12:27 +00:00
1a54e33c17
ar71xx: add get_mac_revision to ath9k_platform_data
...
SVN-Revision: 27080
2011-06-01 13:12:26 +00:00
34ff32a6eb
ar71xx: export SoC revision
...
SVN-Revision: 27079
2011-06-01 13:12:24 +00:00
2440175978
refresh patches
...
SVN-Revision: 27078
2011-06-01 07:24:41 +00:00
aafa838d77
fixup second led, patch from Chris
...
SVN-Revision: 27077
2011-06-01 07:21:25 +00:00
86dbc3a02d
ar71xx: add profile and image building code for wzr-hp-ag300h
...
SVN-Revision: 27076
2011-06-01 02:23:30 +00:00
4f06b8263a
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
...
SVN-Revision: 27075
2011-06-01 02:23:26 +00:00
56dd5c4388
fix a crash in mtd_concat when the .sync op is not implemented
...
SVN-Revision: 27074
2011-06-01 02:23:22 +00:00
628cb35179
m25p80: add the chip id for the winbond w25q128 chip
...
SVN-Revision: 27073
2011-06-01 02:23:18 +00:00
acbb2db5e2
fixup pcie clock, thanks Chris
...
SVN-Revision: 27072
2011-05-31 23:55:33 +00:00
33fdc21d40
ar71xx: build images for the AP121 boards
...
SVN-Revision: 27070
2011-05-31 22:53:47 +00:00
9e435c03e0
ar71xx: add sysupgrade support for the AP121 boards
...
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
646937135f
ar71xx: add default network config for the AP121 boards
...
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
f332dbd7be
ar71xx: add support for the AP121/AP121-MINI reference boards
...
SVN-Revision: 27067
2011-05-31 22:53:43 +00:00
8beff081eb
ar71xx: register UART for the AR933X SoCs
...
SVN-Revision: 27066
2011-05-31 22:53:42 +00:00
b460bc6f12
ar71xx: add serial driver for the AR933X UART
...
SVN-Revision: 27065
2011-05-31 22:53:40 +00:00
c34e0cbc4c
ar71xx: add WMAC initialization code for the AR933X SoCs
...
SVN-Revision: 27064
2011-05-31 22:53:39 +00:00
e8a0aaf9a2
ar71xx: add ethernet initialization for the AR933X SoCs
...
SVN-Revision: 27063
2011-05-31 22:53:37 +00:00
e0a0f3796a
ar71xx: enable USB support for the AR933x SoCs
...
SVN-Revision: 27062
2011-05-31 22:53:36 +00:00
677c80ee17
ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
...
SVN-Revision: 27061
2011-05-31 22:53:35 +00:00
88c45e3130
ar71xx: the watchdog uses the reference clock on the AR933x SoCs
...
SVN-Revision: 27060
2011-05-31 22:53:34 +00:00
7acbacab8c
ar71xx: add AR933x specific glue code for IRQ initialization
...
SVN-Revision: 27059
2011-05-31 22:53:32 +00:00
e6fde61bec
ar71xx: don't register 8250 UART on the AR933x SoCs
...
SVN-Revision: 27058
2011-05-31 22:53:31 +00:00
8f7541a044
ar71xx: enable GPIO support for the AR933x SoCs
...
SVN-Revision: 27057
2011-05-31 22:53:30 +00:00
e11b9c8371
ar71xx: add AR933x specific frequency initialization code
...
SVN-Revision: 27056
2011-05-31 22:53:29 +00:00
0bf4478d37
ar71xx: add AR933x specific early_printk support
...
SVN-Revision: 27055
2011-05-31 22:53:27 +00:00
6b3ca9ef0b
ar71xx: add preliminary support for the Atheros AR933x SoCs
...
SVN-Revision: 27054
2011-05-31 22:53:26 +00:00
761e67b394
ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
...
NETGEAR doesnt produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.
This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.
There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 27053
2011-05-31 22:53:25 +00:00
c8d182406d
ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
...
SVN-Revision: 27051
2011-05-31 22:53:22 +00:00
0677e16248
ar71xx: Fix header offset for newer WRT160NL models
...
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27049
2011-05-31 22:53:20 +00:00
be97e2a043
ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
...
SVN-Revision: 27048
2011-05-31 22:53:19 +00:00
ea2f6d0edf
ar71xx: reduce the size of the squashfs-4k binaries
...
SVN-Revision: 27047
2011-05-31 22:53:18 +00:00
5d5f72415e
ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
...
SVN-Revision: 27045
2011-05-31 22:53:15 +00:00
f7b3c3dfd1
ar71xx: sync ath9k_platform_data.h with compat-wireless
...
SVN-Revision: 27044
2011-05-31 22:53:14 +00:00
650c7cc2fd
ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
...
SVN-Revision: 27043
2011-05-31 22:53:13 +00:00
4834fdaccd
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
...
SVN-Revision: 27042
2011-05-31 22:53:12 +00:00
60d5abbc27
ar71xx: ag71xx: make ring sizes configurable via ethtool
...
SVN-Revision: 27041
2011-05-31 22:53:10 +00:00
7a2651f633
ar71xx: ag71xx: prepare to make ring sizes configurable
...
SVN-Revision: 27040
2011-05-31 22:53:09 +00:00
669aba3871
ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
...
Reported-by: Dave Täht <dave.taht@gmail.com>
SVN-Revision: 27039
2011-05-31 22:53:07 +00:00
9567b93e5c
x86: add additional companion chip drivers to alix2 and geos
...
Add the MFGPT high precision timers, and integration into the schedule (clock events).
Use OHCI, not UHCI usb module.
Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27038
2011-05-31 16:57:05 +00:00
68af223efe
x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
...
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27037
2011-05-31 16:57:01 +00:00
ba5b3ece5d
purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them
...
SVN-Revision: 27036
2011-05-31 09:47:30 +00:00
2b5402d128
ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo)
...
SVN-Revision: 27035
2011-05-30 23:08:01 +00:00
0ebc93831f
ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames
...
SVN-Revision: 27034
2011-05-30 23:07:57 +00:00
f738ca7b9c
upgrade to 2.6.39
...
SVN-Revision: 27030
2011-05-30 13:55:34 +00:00
6608f419d1
* backport 2.6.8 patches to .39 / .32.33
...
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support
SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
2011-05-27 09:54:52 +00:00
590c82cec1
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27018
2011-05-27 09:54:48 +00:00
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
2011-05-26 13:53:00 +00:00
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
2011-05-26 13:52:56 +00:00
2785e3fc12
renumber board patches
...
SVN-Revision: 27012
2011-05-26 12:09:15 +00:00
6f7ae75ffa
kernel: exportfs: reallow building as a module
...
It was originally tristate, but was changed to bool to prevent a build
breakage in an earlier patch revision (for a new syscall). The actual
commit[1] changed it in a way this isn't needed anymore, but
accidentially left the EXPORTFS change in. There's no reason for it
not being buildable as a module, so changing it back to tristate is
fine.
see: https://patchwork.kernel.org/patch/812832/
Thank you Jonas Gorski for the patch.
SVN-Revision: 27011
2011-05-25 20:57:13 +00:00
6769216a64
kernel: generic: Update 2.6.39 to final
...
* Add missing config symbols
* Update package/kernel for 2.6.39
CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.
Thank you Jonas Gorski for the patch
SVN-Revision: 27010
2011-05-25 19:51:40 +00:00
c69f2d8788
kernel: some updates for kernel 2.6.39
...
* add md5sum for kernel
* add some missing config symbols
* add some ssb patches to make compat-wireless compile
Thank you Peter Wagner for the patch
SVN-Revision: 27009
2011-05-25 19:32:00 +00:00
8137e35a5d
brcm47xx: initial 2.6.39 support for brcm47xx
...
Thank you Peter Wagner for the patch
SVN-Revision: 27008
2011-05-25 19:27:08 +00:00
fad3f46f0d
fix mtd warnings
...
Fixes for the following warnings:
drivers/mtd/devices/block2mtd.c: In function '_open_bdev':
drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code
drivers/mtd/devices/block2mtd.c: In function 'add_device':
drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type
In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27007
2011-05-25 19:16:58 +00:00
f5f989e3fb
brcm47xx: remove old kernel
...
SVN-Revision: 27006
2011-05-25 18:05:54 +00:00
06166b01dd
brcm47xx: fix partition layout on SimpleShare devices.
...
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.
This fixes #9323
Thank you Will Holmes for the patch.
SVN-Revision: 27005
2011-05-25 17:46:34 +00:00
50d2a84a21
Clean up patch not applying
...
SVN-Revision: 26997
2011-05-24 10:00:36 +00:00
16dfe8b4d1
add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
6c8387fe15
add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
031ea08ef0
refresh patches
...
SVN-Revision: 26957
2011-05-20 10:06:18 +00:00
3e83f60a66
add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
2011-05-20 10:06:15 +00:00
f9f8dcfa70
refresh 2.6.37 patches
...
SVN-Revision: 26955
2011-05-20 10:06:11 +00:00
f0a99c1692
add support for BT Voyager 2500 ( #9070 )
...
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
acf0ec224f
add support for USR9108 LEDs ( #9372 )
...
SVN-Revision: 26953
2011-05-20 10:06:04 +00:00
58b5a2ca7b
add GT701 LEDs support ( #9382 )
...
SVN-Revision: 26952
2011-05-20 10:06:00 +00:00
f2c86a3835
Simple typo for kmod- prefix in alix2 target makefile.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26945
2011-05-19 04:29:40 +00:00
54415a28d6
Remove override of max80211.sh
...
SVN-Revision: 26936
2011-05-18 12:43:54 +00:00
e7dfadd012
Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
...
SVN-Revision: 26932
2011-05-18 11:50:36 +00:00
17e257925f
ar71xx: don't probe the LAN PHY
...
SVN-Revision: 26924
2011-05-17 11:15:24 +00:00
4deecea26b
ar71xx: detect link on LAN ports
...
SVN-Revision: 26922
2011-05-17 11:12:56 +00:00
dfc19a34b4
* adds support for Artec Thincan
...
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
SVN-Revision: 26919
2011-05-17 10:35:14 +00:00
894d50da25
kernel: backport some ssb changes to support a mac80211 update
...
SVN-Revision: 26911
2011-05-16 21:50:20 +00:00
d475545c91
remove an accidentally copied comment from the option.ko device patch
...
SVN-Revision: 26908
2011-05-15 21:28:12 +00:00
43e002fe5e
add definitions for Alcatel X220D and Huawai E173s to option.ko ( #9422 )
...
SVN-Revision: 26906
2011-05-15 19:17:31 +00:00
a4c0645326
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
...
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
SVN-Revision: 26905
2011-05-15 17:23:02 +00:00
2ea528d1d0
ar71xx: add link detection on Ubiquiti devices WAN port
...
SVN-Revision: 26891
2011-05-14 23:31:50 +00:00
c0c2e18452
use correct macros and frame size in ag71xx
...
SVN-Revision: 26890
2011-05-14 23:10:06 +00:00
99d1d4f795
ar71xx: cosmetic fixes
...
SVN-Revision: 26889
2011-05-14 23:08:00 +00:00
d6e96fd7d8
Add new defconfig and profile for es variant
...
SVN-Revision: 26884
2011-05-13 11:49:52 +00:00
abd4a7df35
Squash uids
...
SVN-Revision: 26883
2011-05-13 10:36:39 +00:00
09e0d10010
Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
...
SVN-Revision: 26882
2011-05-13 07:23:11 +00:00
8d66bf7e72
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880
2011-05-13 06:08:49 +00:00
937362f270
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879
2011-05-13 06:06:42 +00:00
9c8a2d5961
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
7d3b735854
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
0fb1c2d537
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
c6af9c23b7
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
2011-05-11 13:33:41 +00:00
4ea316216a
switch to 2.6.38
...
SVN-Revision: 26873
2011-05-11 13:33:34 +00:00
3fc33726a5
add missing 2.6.38 touchscreen config symbols
...
SVN-Revision: 26872
2011-05-11 13:33:30 +00:00
60c125b8e6
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
...
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865
2011-05-09 15:21:58 +00:00
9b5036a29d
ar71xx: populate LED3 on the JA76PF board
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862
2011-05-08 21:38:51 +00:00
b39eebdf1e
ar71xx: add uci config for the WLAN LED on the WRT160NL
...
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
SVN-Revision: 26861
2011-05-08 21:38:49 +00:00
858e2e719b
ar71xx: use phy0tpt trigger for the WLAN LEDs
...
SVN-Revision: 26860
2011-05-08 21:38:48 +00:00
869f3cb718
ar71xx: remove superfluous fifo_cfg overrides
...
SVN-Revision: 26859
2011-05-08 21:38:46 +00:00
bc121d5706
ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht
...
SVN-Revision: 26858
2011-05-08 17:08:06 +00:00
5d77f370d6
ar71xx: ag71xx: make switch register access atomic
...
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
SVN-Revision: 26856
2011-05-08 16:32:53 +00:00
3711658281
ar71xx: ag71xx: fix section mismatch warnings
...
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
SVN-Revision: 26855
2011-05-08 13:30:36 +00:00
ef53029870
ar71xx: ag71xx: fix build error if debugfs is enabled
...
SVN-Revision: 26854
2011-05-08 13:30:26 +00:00
732abc44cc
brcm47xx: update patches
...
SVN-Revision: 26846
2011-05-07 12:49:17 +00:00
8b67d748cb
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
...
SVN-Revision: 26845
2011-05-07 12:40:34 +00:00
2166432ba0
ar71xx: ag71xx: add timestamps to ag71xx_buf
...
SVN-Revision: 26844
2011-05-07 12:40:28 +00:00
896e1d1ab4
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
...
SVN-Revision: 26843
2011-05-07 12:40:26 +00:00
a6708d20d1
ar71xx: ag71xx: use debugfs_remove_recursive
...
SVN-Revision: 26842
2011-05-07 12:40:25 +00:00
c39e5b9360
ar71xx: override wmac device name for the AR934x SoCs
...
SVN-Revision: 26840
2011-05-07 09:23:32 +00:00
fbbe154a48
remove useless patches
...
SVN-Revision: 26837
2011-05-06 12:37:40 +00:00
de02a2795b
fill maintainer infos for a couple of targets
...
SVN-Revision: 26836
2011-05-06 12:37:36 +00:00
1adaa8790d
update to 2.6.38.2
...
SVN-Revision: 26833
2011-05-05 16:35:44 +00:00
fd33dffe60
add missing 2.6.38 symbols
...
SVN-Revision: 26832
2011-05-05 16:35:40 +00:00
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
54fb8868fa
brcm47xx: fix typo in patch
...
SVN-Revision: 26828
2011-05-05 13:18:35 +00:00
7fb06ce6cd
linux/ar71xx: add some missing symbols for nand/yaffs targets
...
SVN-Revision: 26827
2011-05-05 07:19:46 +00:00
John Crispin
Gabor Juhos
Felix Fietkau
Daniel Dickinson
Imre Kaloz
Jo-Philipp Wich
Hauke Mehrtens
Florian Fainelli
Rod Whitby
Vasilis Tsiligiannis
Mirko Vogt
Hamish Guthrie
Matteo Croce
Travis Kemen
Alexandros C. Couloumbis