6f7e2d4ce8
tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
...
SVN-Revision: 24215
2010-12-02 20:19:55 +00:00
5f3f1b8cd8
ar71xx: Configure WNDR3700 switch LED colors properly ( #8103 )
...
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23879
2010-11-04 18:55:16 +00:00
b3b2227869
Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )" on submitter's request
...
SVN-Revision: 23878
2010-11-04 18:53:18 +00:00
77eee74d56
ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )
...
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23877
2010-11-04 18:48:22 +00:00
fc035b3cb6
ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
...
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
3941621dbc
ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well ( fixes #7563 )
...
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
697f5d0bdd
ar71xx: initial support for jjPlus JWAP003
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)
SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
32d12d5e5c
ar71xx: add support for the TL-MR3420 v1 board
...
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
a7bb7dd99e
Add support for Atheros AP96 reference board
...
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.
mach-ap96.c is based on mach-wndr3700.c.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
b4336a8e2d
ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
...
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
523fcf0497
ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
...
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
e35f7ef51d
ar71xx: add eap7660d board to diag.sh and sysupgrade
...
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 22644
2010-08-14 21:07:31 +00:00
9aef272f4a
linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)
...
SVN-Revision: 22631
2010-08-14 07:48:05 +00:00
6616951c15
add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
...
SVN-Revision: 22625
2010-08-13 19:29:51 +00:00
4ee3ae96c2
ar71xx: fix sysupgrade on the ubnt nanostation m
...
SVN-Revision: 22370
2010-07-23 18:16:47 +00:00
900aaa919b
ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528 , without the ethernet fifo cfg values)
...
SVN-Revision: 22353
2010-07-22 12:37:44 +00:00
d6d8014cfd
fix dir-825-b1 default network config after r21905
...
SVN-Revision: 22005
2010-07-01 00:03:43 +00:00
e827a12c48
ar71xx: don't use vlan 0 for devices with rtl8366s switch
...
SVN-Revision: 21905
2010-06-26 19:15:32 +00:00
7bff9c0101
ar71xx: add support for the Senao EAP7660D board
...
This patch adds support for the Senao EAP7660D board to trunk.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 21837
2010-06-18 16:22:05 +00:00
518f43efd8
ar71xx: fix RB750 LED configuration
...
Patch-by: Ray Bellis
SVN-Revision: 21826
2010-06-17 09:24:26 +00:00
b86e4e1c6a
ar71xx: add default network config for the RB433UAH board
...
SVN-Revision: 21765
2010-06-12 13:20:41 +00:00
3045632eb0
ar71xx: add default network configuration file for the RB450/RB433 boards
...
SVN-Revision: 21730
2010-06-08 20:19:23 +00:00
6bccc41f6c
ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
...
SVN-Revision: 21634
2010-05-30 03:20:49 +00:00
65dba323f7
ar71xx: Make wget2nand fail if copying the kernel fails and use the correct file extension for the rootfs image
...
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).
Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>
SVN-Revision: 21444
2010-05-14 08:38:39 +00:00
d6c0363884
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
...
Cc: backfire@openwrt.org
SVN-Revision: 20752
2010-04-09 08:40:09 +00:00
23bebe33a7
Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
...
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.
SVN-Revision: 20722
2010-04-05 23:03:16 +00:00
8701291f0f
ar71xx: add uci defaults to fix trx header on the WRT160NL boards
...
* patch by Otto Solares
SVN-Revision: 20526
2010-03-27 17:38:40 +00:00
35bb7be34d
ar71xx: Add basic WLAN LED control to TL-WR1043ND
...
* thanks to KillaB
* closes #6834
SVN-Revision: 20415
2010-03-25 07:31:17 +00:00
0095ab73f3
ar71xx: fix defconfig script to work with ImageBuilder
...
* patch from #5722
SVN-Revision: 20231
2010-03-15 13:29:16 +00:00
ed3aca86a6
ar71xx: don't break the existing network configuration in the wget2nand script
...
SVN-Revision: 20228
2010-03-15 11:03:33 +00:00
9daf566ddc
ar71xx: fix sysupgrade on the LS-SR71 board
...
SVN-Revision: 20119
2010-03-10 17:41:45 +00:00
eaccbd3fb8
ar71xx: add default network configuration for the PB44 board
...
SVN-Revision: 20099
2010-03-09 18:05:58 +00:00
18ee1b6dda
ar71xx: add uci-defaults for the RB750 board
...
SVN-Revision: 20097
2010-03-09 18:05:51 +00:00
b21308313e
ar71xx: override lan port names on the RB750
...
SVN-Revision: 20096
2010-03-09 18:05:48 +00:00
781c482e6a
ar71xx: improve wget2nand script
...
SVN-Revision: 20094
2010-03-09 18:05:42 +00:00
4d5a9fe402
ar71xx: add missing protocol definitions to default network configurations
...
SVN-Revision: 20091
2010-03-09 18:05:31 +00:00
5e8c8818ed
ar71xx: add preliminary support for the RouterBOARD 750
...
SVN-Revision: 20029
2010-03-07 05:41:01 +00:00
52f03512dc
ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
...
* closes #6782
SVN-Revision: 20006
2010-03-05 20:29:27 +00:00
7bda582cf7
ar71xx: fix status led detection on the RB4xx boards
...
SVN-Revision: 20005
2010-03-05 20:29:24 +00:00
e1bb4af48b
ar71xx: add default network configuration file for the TL-WR741ND board
...
SVN-Revision: 19930
2010-03-01 07:34:48 +00:00
3f7d3dc939
ar71xx: add default network configuration file for the DIR-600 rev. A1 board
...
SVN-Revision: 19929
2010-03-01 07:34:46 +00:00
a6be62a4f1
ar71xx: add default network configuration file for the TL-WR1043ND board
...
Thanks to Andrew Tarabaras.
SVN-Revision: 19840
2010-02-24 13:39:20 +00:00
187d5546db
ar71xx: use the correct name for the status LED on the WRT400 board (thanks to chuljin, patch from #6734 )
...
SVN-Revision: 19831
2010-02-24 13:38:37 +00:00
560f7173b2
ar71xx: update default network configuration file for the WNDR3700
...
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
SVN-Revision: 19830
2010-02-24 13:38:31 +00:00
47990f61fb
ar71xx: add uci configuration for the WAN LED on the WNDR3700
...
Based on a patch by Scott Dudley <spmsink@hotmail.com>
SVN-Revision: 19746
2010-02-19 11:52:25 +00:00
0e84ed29ea
preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
...
SVN-Revision: 19370
2010-01-28 19:28:02 +00:00
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
2b5ba9073f
rtl8366_smi: move RTL8366S driver into a separate file
...
SVN-Revision: 19279
2010-01-22 17:38:07 +00:00
b9328f2e04
ar71xx: change failsafe message
...
SVN-Revision: 19221
2010-01-18 09:15:35 +00:00
a9c5e3159f
ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
...
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
SVN-Revision: 19217
2010-01-18 09:01:47 +00:00
a86a28841c
ar71xx: add some default configs for rtl8366 based devices
...
SVN-Revision: 19210
2010-01-18 00:44:52 +00:00
3cc98b09f7
adjust switch default configs for the swconfig api change
...
SVN-Revision: 19209
2010-01-18 00:38:08 +00:00
21a235bc67
ar71xx: fix typos in the ar71xx.sh
...
SVN-Revision: 19151
2010-01-15 12:11:05 +00:00
cb80426641
ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH
...
SVN-Revision: 19150
2010-01-15 12:08:03 +00:00
58301cdeb8
ar71xx: add support for the D-Link DIR-600 rev. A1 board
...
SVN-Revision: 19100
2010-01-11 08:02:10 +00:00
ac4b63a18b
ar71xx: create firmware images for the AP81/PB42/PB44 boards
...
SVN-Revision: 19011
2010-01-02 16:30:52 +00:00
cace9f4566
ar71xx: add support for the TL-WR841N v1.5 board
...
SVN-Revision: 18893
2009-12-22 19:31:28 +00:00
1f114b0dbd
ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the patch from #6186 )
...
SVN-Revision: 18818
2009-12-18 12:57:01 +00:00
8bc4e3ea14
ar71xx: enable diagnostic LED on the Routerstation Pro
...
SVN-Revision: 18782
2009-12-15 08:35:11 +00:00
e0042b55ea
fix default network config after r18699
...
SVN-Revision: 18708
2009-12-08 22:22:16 +00:00
ddc2e2270b
ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection ( #6309 )
...
SVN-Revision: 18699
2009-12-08 14:06:18 +00:00
7d8a1bf239
ar71xx: TL-WR1043ND support cleanup
...
SVN-Revision: 18697
2009-12-08 12:46:30 +00:00
f065bbdf7f
ar71xx: DIR-825 support cleanup
...
SVN-Revision: 18622
2009-12-03 15:07:41 +00:00
e4d21e0399
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater)
...
SVN-Revision: 18621
2009-12-03 15:07:34 +00:00
bd4bec689d
ar71xx: create sysupgrade image for the WNDR3700
...
SVN-Revision: 18570
2009-11-28 08:25:56 +00:00
ac8369a672
ar71xx: fix a typo in ar71xx.sh
...
SVN-Revision: 18568
2009-11-28 08:25:49 +00:00
536a4ce5b9
ar71xx: add default network configuration file for the WNDR3700
...
SVN-Revision: 18566
2009-11-27 21:21:24 +00:00
4704478682
ar71xx: add sysupgrade support for Ubiquiti XM boards
...
SVN-Revision: 18533
2009-11-25 09:51:31 +00:00
bc97b5de8b
ar71xx: enable failsafe on the Nanostation M/Rocket M
...
SVN-Revision: 18532
2009-11-25 09:51:28 +00:00
523aba9ff9
ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them
...
SVN-Revision: 18531
2009-11-25 09:51:25 +00:00
a12a03de8d
ar71xx: register LEDs and buttons on the WNDR3700
...
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415 )
SVN-Revision: 18435
2009-11-16 17:31:25 +00:00
5ab66428b0
ar71xx: add preliminary support for the Netgear WNDR3700
...
Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311
SVN-Revision: 18411
2009-11-13 17:11:29 +00:00
28e212cc40
ar71xx: add default network configuration for RS and RS-Pro
...
SVN-Revision: 18103
2009-10-20 19:36:47 +00:00
a525c056d5
ar71xx: add default network configuration file for the WP543 board
...
SVN-Revision: 18101
2009-10-20 12:59:45 +00:00
abffbb5da7
add a defconfig for wrt160nl which contains switch settings
...
SVN-Revision: 17826
2009-10-02 21:07:12 +00:00
4a99a9b7e3
ar71xx: use 'link4' LED for diagnostic on Bullet M
...
SVN-Revision: 17813
2009-10-01 19:41:13 +00:00
dd3b2ae8af
ar71xx: add default network configuration for the Bullet M
...
SVN-Revision: 17810
2009-10-01 19:41:06 +00:00
b6ce09fea4
ar71xx: use WPS led for diagnostic on WRT160NL
...
SVN-Revision: 17518
2009-09-05 18:46:43 +00:00
0b869ee143
preliminary failsafe support ( closes #5726 )
...
SVN-Revision: 17321
2009-08-19 20:16:01 +00:00
39b7814f25
add diag script ( closes #5725 )
...
SVN-Revision: 17320
2009-08-19 19:26:53 +00:00
a59d59be79
enable sysupgrade on the WRT160Nl
...
SVN-Revision: 17202
2009-08-09 14:12:24 +00:00
304fbfa841
init mac address on the WRT160NL board (thanks to Gerry Rozema for testing)
...
SVN-Revision: 17124
2009-08-04 17:45:00 +00:00
bfd20cb57d
init mac address on the TEW-632BRP boards ( closes #5403 )
...
SVN-Revision: 17100
2009-08-03 07:48:21 +00:00
9d1e01a159
fix sysupgrade
...
SVN-Revision: 17092
2009-08-02 09:27:38 +00:00
5f2d2695d9
enable sysupgrade support for the TL-WR741ND
...
SVN-Revision: 16982
2009-07-25 19:50:26 +00:00
227e69c0f4
add experimental sysupgrade support
...
SVN-Revision: 16364
2009-06-06 17:44:49 +00:00
656f86f810
add default network configuration for the AP83 board
...
SVN-Revision: 16360
2009-06-06 16:01:09 +00:00
f3c3e2772f
improve MZK-W300NH support (thanks to Kazuki Shimada for the board)
...
SVN-Revision: 16340
2009-06-04 18:18:36 +00:00
f6e6a733f5
add preliminary support for the WRT160NL
...
SVN-Revision: 16068
2009-05-25 18:36:49 +00:00
7807c1a29f
add experimental support for the Atheros PB44 board
...
SVN-Revision: 15928
2009-05-20 08:23:48 +00:00
aab2d9371b
add experimental support for the Linksys WRT400N board (thanks to netprince)
...
SVN-Revision: 15422
2009-04-26 06:40:02 +00:00
ef537a68da
ap81: register ethernet devices, and add default network configuration file
...
SVN-Revision: 14921
2009-03-17 18:07:16 +00:00
fa36af494f
pb42: fix ethernet, remove USB registration, add default network configuration
...
SVN-Revision: 14876
2009-03-14 18:28:33 +00:00
ceb3b8c837
tew-632brp: add default network configuration
...
SVN-Revision: 14830
2009-03-10 08:14:26 +00:00
dfd746cd47
add default network configuration for the RB-411 board
...
SVN-Revision: 14695
2009-02-28 18:55:46 +00:00
80afab21fc
add default network configuration for the AW-NR580
...
SVN-Revision: 14688
2009-02-27 20:49:51 +00:00
1adf135943
wnr2000: enable ar8216 workaround, add network config. LAN ports now work
...
SVN-Revision: 14663
2009-02-26 05:54:32 +00:00
f88c482dea
defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci
...
SVN-Revision: 14662
2009-02-26 05:54:07 +00:00
8e0e4cb3d8
mzk-w04nu: enable the ar8216 chip workaround, and add a default network configuration file
...
SVN-Revision: 14656
2009-02-25 16:48:56 +00:00
9da4abfe58
add default network configuration for the TL-WR941ND board
...
SVN-Revision: 14654
2009-02-24 18:19:02 +00:00
Jo-Philipp Wich
Felix Fietkau
Gabor Juhos
Alexandros C. Couloumbis
Daniel Dickinson
Andy Boyett