hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
8,341 Commits
4 Branches
8 Tags
169 MiB
Commit Graph

1834 Commits (1d3d606613f75729a2c3d366bedb152126dddd1b)

Author SHA1 Message Date
Andy Boyett 3e8ab1ed20 linux-uvc: Upgrade to revision 215 
SVN-Revision: 11519
 2008-06-17 05:39:05 +00:00
Andy Boyett 5a7529a58d Create $(1)/etc/uci-defaults directory during installation. Thanks Yuji Mano. - Fixes the use of CONFIG_UCI_PRECONFIG under git; git does not track empty directories. 
SVN-Revision: 11517
 2008-06-17 00:44:10 +00:00
Yuji Mano 0b5f602421 Revert previous bad commit r11512 
SVN-Revision: 11513
 2008-06-16 19:37:00 +00:00
Yuji Mano 5ee48c0b00 Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory. 
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>

SVN-Revision: 11512
 2008-06-16 19:14:13 +00:00
Imre Kaloz b3e20537ca libnl: backport memleak fix 
SVN-Revision: 11500
 2008-06-16 12:43:16 +00:00
Imre Kaloz 593c2b7cec fix libnl compile with older kernels 
SVN-Revision: 11499
 2008-06-16 12:42:36 +00:00
Felix Fietkau f2e997ac38 remove some unused crap 
SVN-Revision: 11472
 2008-06-15 11:15:35 +00:00
Felix Fietkau ddd809f9e5 (6/6) bcm57xx: package 
This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11471
 2008-06-15 11:11:28 +00:00
Felix Fietkau 40990382e5 (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11469
 2008-06-15 11:10:27 +00:00
Felix Fietkau f7e09198fe (1/6) bcm57xx: init from diag 
I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11466
 2008-06-15 11:09:27 +00:00
Peter Denison 464ed48321 Remove ssb headers from mac80211 to avoid conflict with in-kernel ones 
SVN-Revision: 11462
 2008-06-13 21:05:26 +00:00
Felix Fietkau 7c029b0355 another patch fix 
SVN-Revision: 11455
 2008-06-13 08:56:06 +00:00
Felix Fietkau ad9bc6ab09 fix a small comment 
SVN-Revision: 11454
 2008-06-13 07:30:21 +00:00
Felix Fietkau 01c61b0d64 fix ANI and make use of it in all modes except for monitor 
SVN-Revision: 11453
 2008-06-13 01:51:31 +00:00
John Crispin 456893e798 make ip-up scripts aware of network settings 
SVN-Revision: 11446
 2008-06-11 20:03:08 +00:00
John Crispin 0bf765b362 system now knows which timezone it is in 
SVN-Revision: 11445
 2008-06-11 19:59:16 +00:00
Florian Fainelli 6d88031192 Add syskonnect yukon2 support (#2568) 
SVN-Revision: 11437
 2008-06-11 15:51:23 +00:00
Felix Fietkau 62bef2bced madwifi: remove unnecessary part of the 349-reset.patch, add an ANI fix for future HALs 
SVN-Revision: 11409
 2008-06-09 10:17:36 +00:00
Peter Denison ea8b4cb0d7 Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens. Fixes #3501 
SVN-Revision: 11407
 2008-06-08 20:19:19 +00:00
Gabor Juhos 50a749e9a7 add button-hotplug driver, will be usable to check status of buttons connected to GPIO lines 
SVN-Revision: 11401
 2008-06-07 18:25:32 +00:00
Felix Fietkau 06447d5cfa oops. accidentally committed the wrong patch version 
SVN-Revision: 11395
 2008-06-07 15:11:21 +00:00
Felix Fietkau 60e3586f6f fix madwifi on linux 2.4 
SVN-Revision: 11385
 2008-06-06 23:53:03 +00:00
John Crispin 51b28d44a9 use default gateway for routes that have no gw specified, Signed off by: Brian J. Murrell 
SVN-Revision: 11380
 2008-06-06 18:49:23 +00:00
Imre Kaloz 7a72cfdd2a add little endian arm wpa_supplicant config file 
SVN-Revision: 11369
 2008-06-05 17:15:12 +00:00
Felix Fietkau 036b397595 fix sysupgrade 'do_upgrade: not found' error 
SVN-Revision: 11362
 2008-06-04 23:20:56 +00:00
Felix Fietkau b4d1c134da upgrade uci to 0.4.2 - fixes some escaping and library issues 
SVN-Revision: 11361
 2008-06-04 22:43:26 +00:00
Peter Denison b2a1f5e79b Update b43 from compat-wireless-2008-05-26 codebase 
SVN-Revision: 11358
 2008-06-04 19:47:48 +00:00
Peter Denison e8620fa5aa Update mac80211 to compat-wireless-2008-05-26 
SVN-Revision: 11357
 2008-06-04 19:47:27 +00:00
Peter Denison 238a618093 Update libnl to compile on and after 2.6.25 
SVN-Revision: 11356
 2008-06-04 19:45:46 +00:00
Travis Kemen b35e663111 add wpa-eap uci configs Signed-off-by: David Bird <david@coova.com> 
SVN-Revision: 11355
 2008-06-04 18:18:58 +00:00
Felix Fietkau 0b66a7d614 upgrade uci to 0.4.1 improves uci.foreach and uci.get_all in the lua binding no longer records changes for uci set with oldval == newval 
SVN-Revision: 11354
 2008-06-04 15:28:46 +00:00
Felix Fietkau c8ed362edd move the uci lua plugin to /usr/lib/lua instead of /usr/lib/lua/5.1 
SVN-Revision: 11353
 2008-06-04 15:12:44 +00:00
Imre Kaloz 7bb65fb9d7 add preliminary Marvell Orion support 
SVN-Revision: 11352
 2008-06-04 13:51:17 +00:00
Imre Kaloz 0244e57bb9 refresh madwifi patches using upstream style 
SVN-Revision: 11351
 2008-06-04 13:16:18 +00:00
Felix Fietkau 49499dfbd1 update uci to v0.4.0 - improves lua binding 
SVN-Revision: 11348
 2008-06-03 21:43:32 +00:00
Steven Barth 5da5342fda Updated Dnsmasq to 2.42 (#3498) 
SVN-Revision: 11339
 2008-06-03 15:06:20 +00:00
Gabor Juhos f9518d9a74 netfilter/iptables: enable IMQ on 2.6.25 
SVN-Revision: 11335
 2008-06-02 19:46:47 +00:00
Florian Fainelli 82247228ea We do not need to make the experimental/install-experimental targets starting with 1.4.x version 
SVN-Revision: 11325
 2008-06-02 11:54:05 +00:00
Felix Fietkau 40720b6d20 madwifi: fix cflags for generic mips hal 
SVN-Revision: 11319
 2008-06-01 12:08:02 +00:00
Felix Fietkau 193949d2c6 fix madwifi menuconfig (thx, Othello) 
SVN-Revision: 11318
 2008-06-01 06:00:25 +00:00
Felix Fietkau 3f1f985692 add missing export 
SVN-Revision: 11317
 2008-06-01 03:40:10 +00:00
Felix Fietkau a91f7dcfd8 madwifi: refresh patches 
SVN-Revision: 11316
 2008-06-01 03:01:58 +00:00
Felix Fietkau c05f60e0d0 madwifi: clean up scanning code, add support for changing scan lists 
SVN-Revision: 11315
 2008-06-01 03:00:59 +00:00
Felix Fietkau 17a7cfb3a7 madwifi: update to sam leffler's latest hal fixes LED on wisoc fixes rx sensitivity issues improves throughput on all cards/devices enhances link stability 
SVN-Revision: 11314
 2008-06-01 03:00:32 +00:00
Felix Fietkau 3e0c844379 clean up performance patch, add some head/tailroom calculation fixes (thx, benoit) fix some unused variables 
SVN-Revision: 11313
 2008-06-01 00:11:32 +00:00
Felix Fietkau e97b3f0b95 madwifi build scripts cleanup 
SVN-Revision: 11312
 2008-06-01 00:11:14 +00:00
Felix Fietkau 90baadbedc fix wpa_supplicant cflags 
SVN-Revision: 11311
 2008-06-01 00:10:26 +00:00
Steven Barth 80219efc2d updated OpenSSL to 0.9.8h 
SVN-Revision: 11309
 2008-05-31 15:52:11 +00:00
Florian Fainelli 6fab96eb3e Add Siemens SE505v2 detection to diag (#3416) 
SVN-Revision: 11308
 2008-05-31 12:32:05 +00:00
Florian Fainelli b11e790e7a Fix ATM usb device selection (#3429) 
SVN-Revision: 11307
 2008-05-31 12:14:02 +00:00
Felix Fietkau 5ad3720371 This Makefile patch adds support for the "Privacy Extensions", "IP-in-IPv6 tunnel", "Multiple Routing Tables" and "source address based routing" in the 2.6 Kernel. 
Signed-off-by: "Alina Friedrichsen" <x-alina-ml@gmx.net>

SVN-Revision: 11288
 2008-05-29 09:27:33 +00:00
Imre Kaloz 20fbb8b151 move the fconfig package into trunk 
SVN-Revision: 11274
 2008-05-27 13:21:12 +00:00
Nicolas Thill ae879baa57 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 
SVN-Revision: 11272
 2008-05-26 22:57:51 +00:00
Matteo Croce 7e9f396980 fixed mount path (closes #3464) 
SVN-Revision: 11267
 2008-05-25 20:03:00 +00:00
Florian Fainelli 29365f1d14 Fix compilation of lm77 module (#3447) 
SVN-Revision: 11256
 2008-05-24 14:16:23 +00:00
Florian Fainelli 85fa20921a Fix mount utilites installation (#3464) 
SVN-Revision: 11255
 2008-05-24 13:37:36 +00:00
Felix Fietkau 554ddcf755 fix liblua symlink installation 
SVN-Revision: 11245
 2008-05-23 07:09:29 +00:00
Steven Barth f3bc063753 Added missing header reference to InstallDev target 
SVN-Revision: 11241
 2008-05-22 20:26:23 +00:00
Felix Fietkau d8d15cb1c0 fix lua compile issues on ixp4xx (EABI) by linking libgcc into liblua 
SVN-Revision: 11240
 2008-05-22 14:20:56 +00:00
Felix Fietkau 6fa85238f5 add updated lua patchset from Steven Barth (cyrus) as explained in http://lists.openwrt.org/pipermail/openwrt-devel/2008-May/002170.html 
SVN-Revision: 11239
 2008-05-22 14:20:36 +00:00
Peter Denison f027ecb2cf Stopgap compilation fixes for diag and switch under 2.6.25 
SVN-Revision: 11231
 2008-05-20 22:33:45 +00:00
Peter Denison de5c50cfe4 Update iproute2 to version 2.6.25, and fixup patches 
SVN-Revision: 11230
 2008-05-20 22:17:26 +00:00
Matteo Croce ac8bf03f8e create /etc/fstab on boot (closes #3458) 
SVN-Revision: 11225
 2008-05-20 19:02:19 +00:00
Steven Barth f2de1dec21 Merge branch 'openssl' 
SVN-Revision: 11224
 2008-05-20 18:12:08 +00:00
Matteo Croce 0a1c669ec1 fix some wrong paths 
SVN-Revision: 11217
 2008-05-19 22:08:46 +00:00
Matteo Croce 925ad245e0 avr32: add watchdog driver 
SVN-Revision: 11192
 2008-05-18 23:13:25 +00:00
Rod Whitby 6a79ee257d sound: Remove atheros restriction, since atheros can have usb sound cards 
SVN-Revision: 11168
 2008-05-18 11:54:49 +00:00
Florian Fainelli d543939042 Add support for OTI6858 and ARK3116 usb serial converters (#3442) 
SVN-Revision: 11167
 2008-05-18 11:21:28 +00:00
Felix Fietkau eb2e08d894 ifndef is not supported inside make variable expansion 
SVN-Revision: 11165
 2008-05-17 20:13:29 +00:00
Rod Whitby c715985c97 base-files: Update /etc/init.d/fstab with new location of swapon and swapoff (they moved from /sbin to /usr/sbin) 
SVN-Revision: 11157
 2008-05-17 00:13:05 +00:00
Yuji Mano 9788ab458c update version 
SVN-Revision: 11154
 2008-05-16 18:56:04 +00:00
Rod Whitby aff3215d29 modules/other.mk: Enable bluetooth for atheros 
SVN-Revision: 11150
 2008-05-16 16:35:04 +00:00
Florian Fainelli 99b6b35be3 Add support for Asus wl-520gc 
SVN-Revision: 11145
 2008-05-16 01:18:57 +00:00
Travis Kemen 3f8eaeb2c3 This patch adds a number of configuration options to the MadWifi package. You can now configure the HAL, bus, default rate control algorithm as well as the debug mode from within make menuconfig. The goal is to be able to support hardware profiles with different HALs without messing around with the Makefile directly. Signed-off-by: Axel Gembe <ago@bastart.eu.org> 
SVN-Revision: 11140
 2008-05-15 00:59:34 +00:00
Peter Denison 72d40dec08 Allow package/switch to compile against 2.6.25 
SVN-Revision: 11138
 2008-05-14 15:03:05 +00:00
Ralph Hempel 6d4c89c7f5 adding check for /proc/net/vlan/config (==vlan enabled kernel) 
SVN-Revision: 11132
 2008-05-13 09:21:17 +00:00
Peter Denison 06c7c04288 Fix typo in broadcom-diag LED output enable 
SVN-Revision: 11125
 2008-05-12 19:46:53 +00:00
Andy Boyett e136c5203d Fix kmod-ata-piix deps 
SVN-Revision: 11121
 2008-05-12 06:41:12 +00:00
Andy Boyett bd06be4f73 Package nvidia sata driver 
SVN-Revision: 11120
 2008-05-12 06:40:54 +00:00
Andy Boyett 78b7201f2a Package AHCI driver 
SVN-Revision: 11119
 2008-05-12 06:40:37 +00:00
Andy Boyett 0ff7ae2d6c Package VIA sata driver 
SVN-Revision: 11118
 2008-05-12 06:40:18 +00:00
Nicolas Thill 94940b2265 disable ip6tables as well on 2.6.25 until we have working IMQ support 
SVN-Revision: 11117
 2008-05-11 22:41:49 +00:00
Nicolas Thill 70a8c455b0 fix fuse: use in-kernel module for 2.6.25+ kernels 
SVN-Revision: 11116
 2008-05-11 22:27:32 +00:00
Nicolas Thill e93e293b41 add a macro to compare kernel patch versions and use it for crypto and watchdog changes in 2.6.24+ kernels (closes: #3402) 
SVN-Revision: 11115
 2008-05-11 20:56:51 +00:00
Nicolas Thill 2b05ed626c add a package for the badblocks utility (closes: #3404) 
SVN-Revision: 11107
 2008-05-11 10:33:34 +00:00
Nicolas Thill d7f96cfa50 fix typos in [11073] 
SVN-Revision: 11094
 2008-05-09 07:16:15 +00:00
Nicolas Thill a7b3ffc182 cosmetic change: rename IPT_NAT_DEFAULT & IPT_NAT_EXTRA to IPT_NATHELPER & IPT_NATHELPER_EXTRA respectively, to better match package names 
SVN-Revision: 11073
 2008-05-08 11:32:46 +00:00
Nicolas Thill 50ee10f486 package/kernel fixes: - remove dup netfilter.mk includes - always define NF_KMOD so that proper KCONFIG entries are emitted for netfilter modules at DUMP time 
SVN-Revision: 11072
 2008-05-08 11:16:07 +00:00
Travis Kemen 162a814ef4 only ignore dhcp but still listen for dns closes #3406 
SVN-Revision: 11062
 2008-05-08 00:01:58 +00:00
Felix Fietkau 31a3a503cc add a flag "IGNORE_ERRORS", which can be used to ignore build errors in packages 
SVN-Revision: 11059
 2008-05-07 16:45:00 +00:00
Yuji Mano 80e1190c4f add missing udevextras package option - edd_id 
SVN-Revision: 11053
 2008-05-05 21:58:03 +00:00
Yuji Mano 7d9a522254 add ps3-dump-bootloader to package install 
SVN-Revision: 11052
 2008-05-05 21:49:24 +00:00
Felix Fietkau ffc0827b65 fix lua compile configuration error 
SVN-Revision: 11047
 2008-05-04 17:48:26 +00:00
Nicolas Thill b99ab355c1 remove dependency on zd1211-firmware, since it was removed in [11022] 
SVN-Revision: 11040
 2008-05-03 23:24:12 +00:00
John Crispin 1dce440fa5 revert borked commit 
SVN-Revision: 11038
 2008-05-03 20:28:13 +00:00
John Crispin 3141b38fd8 make etrax serial driver register its device nodes, so we get a console 
SVN-Revision: 11037
 2008-05-03 20:12:43 +00:00
Felix Fietkau ae92bf4ae4 upgrade to uci 0.3.4 - extends lua bindings and fixes a bug that rejected "-" in uci package names 
SVN-Revision: 11030
 2008-05-03 17:08:39 +00:00
John Crispin b6b32f8131 remove old zd firmware 
SVN-Revision: 11022
 2008-05-03 15:10:51 +00:00
Nicolas Thill 3d4052492d ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number 
SVN-Revision: 11018
 2008-05-03 12:11:35 +00:00
Matteo Croce fe5b220467 acx100 fix by nabcore 
SVN-Revision: 11011
 2008-05-02 18:48:47 +00:00