Commit Graph

104 Commits (125fc703bb1477599809db96e5d62a1915864fad)

Author SHA1 Message Date
Luka Perkov 0eb732c659 kirkwood: drop PROFILE from image names
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38281
2013-10-02 00:33:48 +00:00
Luka Perkov 0331657a4f kirkwood: add linux 3.10 support
Backport appropriate patches to allow using device tree only board
defintions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38280
2013-10-02 00:33:47 +00:00
Luka Perkov 7d1e5ae918 kirkwood: prepare for 3.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38279
2013-10-02 00:33:45 +00:00
Luka Perkov 914ca3cb55 kirkwood: explicitly set CPU_TYPE to xscale
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38278
2013-10-02 00:33:43 +00:00
Florian Fainelli 6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Felix Fietkau d3a7b5633c kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36937
2013-06-15 11:50:50 +00:00
Jonas Gorski e7b504ce8e kirkwood: convert to use the new jffs2_nand
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36861
2013-06-05 20:58:53 +00:00
Steven Barth ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Florian Fainelli 1e103b2ecc target: enable XZ BCJ decompressor code after r35097
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
2013-01-14 16:34:25 +00:00
Florian Fainelli 33f6c5ddb9 kernel: add missing USB configuration symbols after r34501
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
2012-12-07 11:01:53 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
John Crispin de3c3d7181 Enable eSATA sheevaplug
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.

Signed-off-by: Unai Uribarri <unaiur@gmail.com>

SVN-Revision: 33266
2012-08-24 06:15:06 +00:00
Luka Perkov 03a6d65c37 kernel: add Marvell SoC built-in RTC to modules
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32732
2012-07-15 14:25:30 +00:00
Luka Perkov c89e87d186 kirkwood: add support for seagate goflexnet and goflexhome
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32725
2012-07-15 12:18:29 +00:00
Luka Perkov 952ce3473d kirkwood: revert config changes from r32053
SVN-Revision: 32719
2012-07-15 00:08:52 +00:00
Luka Perkov 1c80d9f21d kirkwood: fix typo in uci-defaults/leds
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
2012-06-13 18:41:42 +00:00
Luka Perkov be5229f0ba kirkwood: ib62x0 fix reboot
SVN-Revision: 32131
2012-06-08 23:17:46 +00:00
John Crispin a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Luka Perkov 605012ad5d kirkwood: reorganize target
SVN-Revision: 32053
2012-06-05 00:43:56 +00:00
Gabor Juhos c81c6516de kirkwood: use the generic uci-default functions for initial LED setup
SVN-Revision: 31994
2012-05-29 16:39:20 +00:00
Gabor Juhos ba3ad24514 kirkwood: use uci-defaults to configure different boards
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
2012-05-29 16:39:15 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310
SVN-Revision: 31673
2012-05-09 16:16:52 +00:00
Gabor Juhos 200227e0b4 kirkwood: add support for the ZyXEL NSA-310
SVN-Revision: 31669
2012-05-09 11:38:43 +00:00
Gabor Juhos 213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
2012-05-09 11:38:41 +00:00
Gabor Juhos d4876692c1 kirkwood: enable GPIO sysfs interface
SVN-Revision: 31667
2012-05-09 11:38:40 +00:00
Gabor Juhos d1eed108bb kirkwood: nuke 2.6.37 support
SVN-Revision: 31666
2012-05-09 11:38:39 +00:00
Gabor Juhos 861b9b25e0 kirkwood: switch to 3.3
SVN-Revision: 31665
2012-05-09 11:38:37 +00:00
Gabor Juhos b272041998 kirkwood: add 3.3 support
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
2012-05-09 11:38:36 +00:00
Jo-Philipp Wich be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
Jo-Philipp Wich d6f02b62d4 add timeserver config to target specific system configs as well
SVN-Revision: 28750
2011-11-04 12:53:35 +00:00
Hauke Mehrtens 50c743e79e kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch

SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
Imre Kaloz b8430e7427 update to 2.6.32.33 and 2.6.37.4
SVN-Revision: 26226
2011-03-18 13:25:32 +00:00
Imre Kaloz c89b70adcd upgrade to 2.6.37
SVN-Revision: 26225
2011-03-18 13:09:21 +00:00
Imre Kaloz b74308c433 only support EABI on ARM targets
SVN-Revision: 25928
2011-03-07 12:59:19 +00:00
Imre Kaloz f7c0993027 switch back to xscale mtune, marvell_f is unlikely to get upstreamed
SVN-Revision: 25707
2011-02-25 17:33:04 +00:00
Florian Fainelli 31709b2c76 update to 2.6.35.11
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
Imre Kaloz 7ab8489f82 config symbol cleanup
SVN-Revision: 25272
2011-02-01 13:18:26 +00:00
Jo-Philipp Wich 81edc28358 enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest
SVN-Revision: 24541
2010-12-13 10:06:40 +00:00
Imre Kaloz ead8ab8403 update to the latest stable kernels
SVN-Revision: 24136
2010-11-24 18:50:11 +00:00
Imre Kaloz 4052849677 switch from ext2 to ext4 (w/o) journaling
SVN-Revision: 24084
2010-11-22 12:12:39 +00:00
Imre Kaloz 0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8
SVN-Revision: 23851
2010-11-04 09:01:08 +00:00
Lars-Peter Clausen 4990417071 Fix patch
SVN-Revision: 23702
2010-10-29 06:59:46 +00:00
Lars-Peter Clausen 41ddcd79ab Adds leds and gpio keys support for Iomega iConnect.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 23682
2010-10-27 21:22:07 +00:00
Imre Kaloz 81059a2a96 mark targets maintained by me
SVN-Revision: 23668
2010-10-27 13:46:00 +00:00
Lars-Peter Clausen 290e192ce8 Make mv_cesa crypto module available on Orion as well.
SVN-Revision: 23229
2010-10-04 21:33:07 +00:00