Commit Graph

25287 Commits (0ff5dc2f387e5e2fd44d5f559125e9055b5b4bf4)

Author SHA1 Message Date
Jonas Gorski 4b0655500a kernel: b53: support phy ids for BCM5365
BCM5365 (and probably other older variants) use a different phy id, so
the phy driver never attached for them.
Fix this by adding the appropriate phy id to the fixup and the phy
driver.

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37906
2013-09-05 20:30:34 +00:00
Hauke Mehrtens bdc04e379f mac80211: kmod-rtl_pci: fix dependencies
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
Hauke Mehrtens f9b790bd55 kernel: kmod-libphy, kmod-tg3: fix load order
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
Hauke Mehrtens 9af52f3a2c kernel: kmod-ssb, kmod-b44: fix load order
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
Hauke Mehrtens fd561a47c5 kernel: kmod-firewire: fix dependencies
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
Hauke Mehrtens 11ae55cc95 mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
linux-firemware contains the same version we loaded without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
Hauke Mehrtens 14a65f1cfb kernel: kmod-fs-xfs: fix dependencies
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
Hauke Mehrtens 09a55136d7 kernel: kmod-usb-serial-keyspan: fix dependencies
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
Hauke Mehrtens 82a2969100 ath10k: enable Atheros 802.11ac driver
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.

This goes build tested, not run time tested.

[Hauke: I did some minor changes]

Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
Imre Kaloz 445d1a8b27 Add missing symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 37897
2013-09-05 10:08:59 +00:00
Hauke Mehrtens 4eced13a37 kernel: b53: allow access the MIB counters on BCM5365
b53_no_ops has no elements and b53_port_ops has one element, this makes
the code access some random memory when trying to access the mib
counter functions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37895
2013-09-04 16:15:10 +00:00
Luka Perkov 1eb21b87bd kobs-ng: add new package
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37894
2013-09-03 23:22:16 +00:00
Jo-Philipp Wich e01fb70f1b usbreset: rewrite to not rely on /proc/bus/usb anymore
SVN-Revision: 37893
2013-09-03 15:46:39 +00:00
Gabor Juhos 07216b9f46 ar71xx: fix NetGear initramfs image names
The '-initramfs' string is duplicated in the image names,
fix it.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37892
2013-09-03 07:22:27 +00:00
Steven Barth 2e2c4c2dd3 Fix IPv6 NAT breaking older kernels
SVN-Revision: 37891
2013-09-03 06:29:46 +00:00
Gabor Juhos d120ec18b2 kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
2013-09-02 19:12:54 +00:00
Gabor Juhos c8cd8c94d8 ar71xx: image: reorder Image/Build/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37889
2013-09-02 19:05:58 +00:00
Gabor Juhos 1712fdd658 ar71xx: image: simplify more oneliner macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37888
2013-09-02 19:05:57 +00:00
Gabor Juhos 02551d3883 ar71xx: image: simplify oneliner loader macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37887
2013-09-02 19:05:56 +00:00
Gabor Juhos 0cdf133d20 ar71xx: image: simplify oneliner initramfs macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37886
2013-09-02 19:05:55 +00:00
Gabor Juhos b125a0f6b9 ar71xx: image: simplify oneliner buildkernel macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37885
2013-09-02 19:05:54 +00:00
Florian Fainelli a1267290ed scripts/feeds: ensure that --ff is enabled
Users may have merge.ff set to false, which will force merge commits to
be generated.  The intent here is to have a fast-forward merge when
possible, so let's make sure fast-forwards are enabled.

Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37884
2013-09-02 18:25:10 +00:00
Florian Fainelli c463728b2d build scripts: fix 'make defconfig' damage
Looking at the target 'defconfig' in include/toplevel, it doesn't
directly reference $(HOME)/.openwrt/defconfig nor does it reference any
prerequisites using it as a target.

Therefore, building "defconfig" as a target uses the defaults in the
tree, but not the defaults that a user might have explicitly specified.

This patch fixes this regression from r36361.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
[florian: apply with the proper patch level, wrap at 80 columns]
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37883
2013-09-02 18:25:06 +00:00
Florian Fainelli 33e7337d97 mcs814x: dlan-usb-extender: fix usbdev trigger
Every device I connect to the USB port is detected as 2-1, not 1-1.
So adjust the default setting accordingly.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37882
2013-09-02 18:25:01 +00:00
Gabor Juhos 4a11acf81b ar71xx: optimize kernel generation
When the squashfs and jffs2 images are generated
in the same turn, the compressed kernel images
are generated twice with the same parameters.

Move compressed kernel generation into a separate
phase to avoid that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37881
2013-09-02 18:03:39 +00:00
Gabor Juhos 0950922925 generic: remove linux version checks from myloader.c
The myloader partition parser code uses ifdef wrappers
to make the code usable on kernels below version 3.2.
All targets are using kernel 3.3 at least so the wraper
is not needed. Remove that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37880
2013-09-02 16:33:13 +00:00
Gabor Juhos 0ceeb6a068 ar71xx: image: dynamically generate Image/Build/Template/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37879
2013-09-02 16:10:44 +00:00
Gabor Juhos 122a61aa49 ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2
It also fixes USB Power on MR3420v2.

This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.

Signed-off-by: Dmytro <dioptimizer@gmail.com>

SVN-Revision: 37878
2013-09-02 16:09:12 +00:00
Jo-Philipp Wich a6b26d9aea Add rpcd - an extensible backend server for ubus-over-json-rpc operations, session and acl management.
SVN-Revision: 37877
2013-09-02 15:36:51 +00:00
Gabor Juhos 1f007eeca1 ar71xx: remove fs_* variables from image/Makefile
Those are not needed since we are generating the
initramfs images along with the others.

Remove the variables and use the template names
directly.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37876
2013-09-02 09:24:59 +00:00
Gabor Juhos b85c090177 package/rotary-gpio-custom: fix checkpatch errors module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37875
2013-09-02 08:45:32 +00:00
Gabor Juhos 1928106d0d package/w1-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37874
2013-09-02 08:45:31 +00:00
Gabor Juhos f18a0d9547 package/i2c-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37873
2013-09-02 08:45:30 +00:00
Gabor Juhos 6bb50e4df1 package/kernel: add spi-gpio-custom module
The package makes it possible to create custom SPI
buses via GPIO lines.

This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.

Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
  - change subject,
  - extend and reformat commit message,
  - cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37872
2013-09-02 08:45:29 +00:00
Gabor Juhos e7a5947576 ar71xx: fix initramfs image generation for Cameo933x profiles
Initramfs images are not generated for profiles which
are using the squashfs-only template. Add the missing
'Image/Build/Template/squashfs-only/initramfs' to fix
that.

Also, 'Image/Build/Cameo933x/initramfs' uses wrong
parameters for 'MkuImageLzma/initramfs' due to a
misplaced commma. Remove that to fix the generated
initramfs images.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37871
2013-09-02 07:42:03 +00:00
Gabor Juhos 968ed2e58a x86/alix2: remove kernel config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37870
2013-09-02 07:36:46 +00:00
Gabor Juhos 5aa70d283f x86/alix2: switch to 3.10.9
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37869
2013-09-02 07:36:45 +00:00
Gabor Juhos 562e76d22c x86/alix2: add kernel config for 3.10
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37868
2013-09-02 07:36:44 +00:00
Gabor Juhos 11b1887c53 x86: add support for 3.10
Add kernel configuration and patches for Linux 3.10.

Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.

Russell says in the original patch:

"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built.  The patches
required no changes."

The current patch contains additional configuration tweaks,
and the kernel patches were refreshed.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37867
2013-09-02 07:36:40 +00:00
Steven Barth 0a85c59040 netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration
SVN-Revision: 37866
2013-09-01 17:59:48 +00:00
Steven Barth 3e647ac9b6 iptables: Update to 1.4.20
SVN-Revision: 37865
2013-09-01 13:46:10 +00:00
Vasilis Tsiligiannis e532d65373 scripts/checkpatch.pl: Fix whitespace errors
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>

SVN-Revision: 37864
2013-08-31 11:16:49 +00:00
Vasilis Tsiligiannis 957c2576cc scripts/{cleanfile,cleanpatch}: Add scripts for cleaning up file and patch whitespaces
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>

SVN-Revision: 37863
2013-08-31 11:16:44 +00:00
Vasilis Tsiligiannis a35b5dc2f7 scripts/checkpatch.pl: Remove checks for __setup's documentation
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>

SVN-Revision: 37862
2013-08-31 11:15:06 +00:00
Vasilis Tsiligiannis 23ea2cb10e scripts/checkpatch.pl: Remove check for deprecated features
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>

SVN-Revision: 37861
2013-08-31 11:15:03 +00:00
Vasilis Tsiligiannis c724c76f65 scripts/checkpatch.pl: Introduce 'checkpatch.pl' script
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>

SVN-Revision: 37860
2013-08-31 11:14:53 +00:00
Luka Perkov 18a767156e imx6: add uboot-envtools to default packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37859
2013-08-29 23:06:32 +00:00
Luka Perkov e29acfd8e9 uboot-imx6: update to v2013.07
Update includes upstream support for Wandboard Quad too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37858
2013-08-29 23:06:31 +00:00
Luka Perkov cdd6361649 uboot-envtools: update to v2013.07
SVN-Revision: 37857
2013-08-29 23:06:29 +00:00
Felix Fietkau 7fc90889d5 netifd: update to the latest version, fixes a bridge handling corner case on config reload
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37856
2013-08-29 22:20:36 +00:00