hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
18,395 Commits
4 Branches
8 Tags
169 MiB
Commit Graph

7032 Commits (0e40c19b45e2e93e738eab14313e296a7256fe99)

Author SHA1 Message Date
Jonas Gorski eaa935658b swconfig: Add generic switch identifiers 
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.

SVN-Revision: 27800
 2011-07-27 18:00:18 +00:00
Felix Fietkau 4da138d899 x86/alix2: include WAN interface by default 
Include WAN interface by default, instead of putting both ports in the LAN bridge.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27787
 2011-07-26 16:37:48 +00:00
Felix Fietkau 41db64f8e0 x86/alix2: fix typo in target makefile 
Cut and paste cruft from borrowing from Geos platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27786
 2011-07-26 16:37:44 +00:00
Hauke Mehrtens 80956276a7 x86: add missing config symbols 
This adds some config symbols for kernel 3.0.

Thank you realopty for the patch.

This is from #9719.

SVN-Revision: 27775
 2011-07-25 21:21:01 +00:00
Jonas Gorski 4e6c93bef1 bcm63xx: Fix SPI commands and register offsets for BCM6348 
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

SVN-Revision: 27774
 2011-07-25 19:52:47 +00:00
Imre Kaloz f0f10fa599 add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch 
SVN-Revision: 27762
 2011-07-24 22:04:08 +00:00
Jo-Philipp Wich f66871e836 From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua> 
SVN-Revision: 27760
 2011-07-24 15:37:00 +00:00
Jo-Philipp Wich 6eb9e39bc4 refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final 
SVN-Revision: 27759
 2011-07-24 15:36:33 +00:00
Hauke Mehrtens 4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci 
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
 2011-07-24 15:18:29 +00:00
Felix Fietkau 9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
SVN-Revision: 27756
 2011-07-24 14:40:35 +00:00
Felix Fietkau 5b32d62fcf rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB 
SVN-Revision: 27755
 2011-07-24 14:40:31 +00:00
Felix Fietkau 1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Hauke Mehrtens 00dd85d8f6 ocf-linux: version bump to 20110720 
Fixes problem with TFM allocation in cryptosoft.c

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Hauke:
 * remove ubsec_ssb package and take it from ocf-linux
 * use patches from ocf-linux package
 * refresh all patches
 * readd some build fixes for OpenWrt.
 * readd CRYPTO_MANAGER dependency

SVN-Revision: 27753
 2011-07-24 14:17:58 +00:00
Felix Fietkau b5e3f6cd81 x86: 2.6.39 requires additional symbol 
Sysfs support for DMI BIOS was added in 2.6.39.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27749
 2011-07-24 09:41:07 +00:00
Felix Fietkau a6f7e72cf7 atheros: fix mii phy read/write ioctl 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 27747
 2011-07-24 09:11:10 +00:00
Felix Fietkau 6d3bddb056 geos: include pppstats and pppdump in default packaging 
As the Geos box includes an ADSL modem that's targeted towards PPPoE, PPPoA, and bridged utilization, including these useful tools allows for easier configuration and troubleshooting.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27743
 2011-07-24 08:41:58 +00:00
Felix Fietkau 9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
SVN-Revision: 27739
 2011-07-24 08:02:20 +00:00
Imre Kaloz 193845ce7a upgrade to 3.0 
SVN-Revision: 27738
 2011-07-23 20:44:08 +00:00
Imre Kaloz 5e29e14795 upgrade to 3.0 
SVN-Revision: 27737
 2011-07-23 20:43:53 +00:00
Imre Kaloz 0cb1b5d775 3.0 is out 
SVN-Revision: 27736
 2011-07-23 20:42:58 +00:00
Hauke Mehrtens 49f4d4217e brcm47xx: build bcma into the kernel 
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
 2011-07-23 11:19:58 +00:00
Hauke Mehrtens 5169b72c8a kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing 
SVN-Revision: 27731
 2011-07-23 11:17:00 +00:00
Hauke Mehrtens b07b5fc7b6 brcm47xx: remove old kernel versions 
SVN-Revision: 27724
 2011-07-22 18:41:24 +00:00
Hauke Mehrtens b988168906 brcm47xx: update bcma and ssb to master-2011-07-21 
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
 2011-07-22 16:30:42 +00:00
Hauke Mehrtens 39f491e479 kernel: update to linux-3.0 and refresh patches. 
Thank you Peter Wagner for the patch

SVN-Revision: 27722
 2011-07-22 16:04:25 +00:00
Felix Fietkau c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau 005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau 255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
John Crispin 8acc276692 sync default kernel config for lantiq danube/ar9 
SVN-Revision: 27697
 2011-07-19 18:08:09 +00:00
John Crispin 500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE 
SVN-Revision: 27696
 2011-07-19 18:06:52 +00:00
John Crispin 78a9b1a2ad fixes pci on lantiq AR9 SoC 
SVN-Revision: 27695
 2011-07-19 18:06:42 +00:00
John Crispin 3833b7be24 add support for more lantiq AR9 boards 
SVN-Revision: 27694
 2011-07-19 18:06:33 +00:00
Felix Fietkau fee32761f3 kernel: backport and enable tmpfs xattr support for 2.6.39 
SVN-Revision: 27691
 2011-07-19 09:00:55 +00:00
John Crispin 6b8c119b41 * fix external interrupts 
SVN-Revision: 27687
 2011-07-18 16:27:11 +00:00
John Crispin 5906377332 * add gigasx76x update 
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
 2011-07-17 19:27:44 +00:00
Florian Fainelli 3994a2d1f9 add additionnal debug symbols when kernel debugging is enabled 
SVN-Revision: 27637
 2011-07-17 12:30:04 +00:00
Florian Fainelli 9c7294f7c7 add ehci support to DWV-S0 board (#9059) 
SVN-Revision: 27622
 2011-07-16 08:39:04 +00:00
Florian Fainelli 930485561c fix GEN_SPI_RSET_BASE macro (#9697) 
SVN-Revision: 27604
 2011-07-13 09:33:11 +00:00
Imre Kaloz ab5fd3c1cb upgrade to 3.0-rc7 
SVN-Revision: 27600
 2011-07-12 13:44:16 +00:00
Imre Kaloz 0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again 
SVN-Revision: 27592
 2011-07-11 20:35:16 +00:00
Felix Fietkau f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau 2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Imre Kaloz 8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches 
SVN-Revision: 27558
 2011-07-08 09:41:07 +00:00
Imre Kaloz b3b0f0e49a add mpcore_wdt fixes 
SVN-Revision: 27557
 2011-07-08 09:33:13 +00:00
John Crispin 7f548d379f fix generation of falcon images for profiles 
SVN-Revision: 27550
 2011-07-07 20:20:51 +00:00
John Crispin d7732885ed adds 2 ASC related patches to lantiq 
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
 2011-07-07 20:20:46 +00:00
John Crispin b75a8fb532 fix up falcon kernel config 
SVN-Revision: 27542
 2011-07-07 18:20:56 +00:00
John Crispin 036df9f088 fix i2c-falcon kmod package selection 
SVN-Revision: 27541
 2011-07-07 18:20:51 +00:00
John Crispin a463daa818 replace all references to xway with danube 
SVN-Revision: 27538
 2011-07-07 18:20:37 +00:00
John Crispin dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube 
SVN-Revision: 27537
 2011-07-07 18:20:31 +00:00
John Crispin 3c1079a7a7 add ar9 specific profile 
SVN-Revision: 27536
 2011-07-07 18:20:27 +00:00
John Crispin 09d547eae4 rename xway profile to danube and remove ar9 specifics 
SVN-Revision: 27535
 2011-07-07 18:20:21 +00:00
John Crispin f177052c9d remove ar9 board from xway profiles 
SVN-Revision: 27534
 2011-07-07 18:20:16 +00:00
John Crispin dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches 
SVN-Revision: 27532
 2011-07-07 18:20:07 +00:00
Imre Kaloz 79fa6c693a refresh patches 
SVN-Revision: 27528
 2011-07-07 17:18:50 +00:00
Imre Kaloz b8227050fb refresh patches 
SVN-Revision: 27527
 2011-07-07 17:18:06 +00:00
Imre Kaloz 92981b6bb3 enable smp support 
SVN-Revision: 27526
 2011-07-07 17:17:44 +00:00
Imre Kaloz 94055a90a7 make smp code more similar to upstream 
SVN-Revision: 27525
 2011-07-07 17:17:06 +00:00
Imre Kaloz 42df203852 3.0 is at rc6 now 
SVN-Revision: 27524
 2011-07-07 13:30:41 +00:00
Gabor Juhos 5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash 
SVN-Revision: 27523
 2011-07-07 13:01:50 +00:00
Gabor Juhos cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
SVN-Revision: 27522
 2011-07-07 13:01:48 +00:00
Imre Kaloz b15f8f765a add support for and switch to XZ compressed kernels on ARM 
SVN-Revision: 27518
 2011-07-07 10:26:16 +00:00
Imre Kaloz d148dcce05 select the right cpu 
SVN-Revision: 27517
 2011-07-07 10:24:37 +00:00
Florian Fainelli a3e343b722 fix building of perf for arm on uclibc 
SVN-Revision: 27514
 2011-07-07 09:43:00 +00:00
Florian Fainelli a4d69536ea enable support for perf events 
SVN-Revision: 27512
 2011-07-07 09:42:53 +00:00
Florian Fainelli 0cb42cf9a4 enable perf counter support 
SVN-Revision: 27511
 2011-07-07 09:42:50 +00:00
Daniel Dickinson 0d8b0e937d base-files: diag.sh: added failsafe led definition 
SVN-Revision: 27502
 2011-07-07 03:09:20 +00:00
John Crispin a674aabe54 get ready for 3.0 
SVN-Revision: 27496
 2011-07-06 17:27:17 +00:00
Gabor Juhos abb1ca01a7 ramips: fix buffalo image generation 
SVN-Revision: 27495
 2011-07-06 16:46:33 +00:00
Imre Kaloz a832965eff add 3.0 support 
SVN-Revision: 27493
 2011-07-06 13:03:38 +00:00
Imre Kaloz a00596924b refresh patches 
SVN-Revision: 27492
 2011-07-06 12:57:51 +00:00
Imre Kaloz 90bd74dd8b fixup mtd refresh and co. 
SVN-Revision: 27491
 2011-07-06 12:55:21 +00:00
Imre Kaloz f24764a372 fix myloader patch, thanks KanjiMonster 
SVN-Revision: 27490
 2011-07-06 12:48:17 +00:00
John Crispin d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot 
SVN-Revision: 27489
 2011-07-06 10:36:56 +00:00
Imre Kaloz c93b5653bc we have an up-to-date mach-type file now 
SVN-Revision: 27486
 2011-07-06 10:12:50 +00:00
Imre Kaloz 05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff 
SVN-Revision: 27485
 2011-07-06 10:09:15 +00:00
Florian Fainelli 00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block 
SVN-Revision: 27484
 2011-07-06 10:00:39 +00:00
Florian Fainelli 965567a320 refresh 2.6.39 geode patches 
SVN-Revision: 27483
 2011-07-06 10:00:05 +00:00
Gabor Juhos 1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004 
Also sort the board names alphabetically.

SVN-Revision: 27478
 2011-07-06 08:05:00 +00:00
Gabor Juhos d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board 
SVN-Revision: 27477
 2011-07-06 08:04:55 +00:00
Gabor Juhos 2cc346b8e0 ramips: create tftp image for the WHR-G300N board 
SVN-Revision: 27476
 2011-07-06 08:04:54 +00:00
Gabor Juhos 0dc18d8586 ramips: create factory image for the WHR-G300N board 
SVN-Revision: 27474
 2011-07-06 08:04:52 +00:00
Daniel Dickinson 1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
SVN-Revision: 27471
 2011-07-06 06:35:24 +00:00
Daniel Dickinson 9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
SVN-Revision: 27470
 2011-07-06 06:35:22 +00:00
Imre Kaloz 612a1fcbc4 add some symbols 
SVN-Revision: 27464
 2011-07-05 21:19:57 +00:00
Florian Fainelli d24fc7ef56 sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423) 
SVN-Revision: 27457
 2011-07-05 12:40:50 +00:00
Imre Kaloz c52560302d add missing symbols 
SVN-Revision: 27454
 2011-07-05 11:55:31 +00:00
Florian Fainelli 7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533) 
SVN-Revision: 27448
 2011-07-04 15:04:58 +00:00
Gabor Juhos 89f6b29feb ar71xx: fix building of squashfs images 
SVN-Revision: 27446
 2011-07-04 12:10:03 +00:00
John Crispin 29653782a9 set DEFAULT_SUBTARGET for lantiq/ 
SVN-Revision: 27445
 2011-07-04 11:21:47 +00:00
John Crispin 04fefa4a28 fix broken falcon patches from last night 
SVN-Revision: 27441
 2011-07-04 07:50:34 +00:00
Gabor Juhos e9c8218375 ramips: create factory image for DIR-300-B1 
SVN-Revision: 27439
 2011-07-04 06:48:45 +00:00
Felix Fietkau 7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
SVN-Revision: 27434
 2011-07-04 03:03:34 +00:00
John Crispin cd8166f3fd AT91: flexibity: add system uci file 
SVN-Revision: 27413
 2011-07-03 18:55:57 +00:00
John Crispin 349e97f879 AT91: Add flexibity board support 
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

SVN-Revision: 27412
 2011-07-03 18:51:59 +00:00
John Crispin 2975f0aaf1 alix2: add/subtract features as needed 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
 2011-07-03 17:39:24 +00:00
John Crispin 0a8430bfab use netif_receive_skb on lantiq 
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
 2011-07-03 17:39:05 +00:00