e5e0966186
package/base-files: fix typo in r20874 (thanks to rhk for spotting it)
...
SVN-Revision: 20878
2010-04-15 08:22:39 +00:00
15542fcdd8
package/base-files: use a single $(CP) instead of two to copy shared library files
...
SVN-Revision: 20874
2010-04-15 06:01:45 +00:00
eafa2ec962
option to allow boot to run to completion before starting shell
...
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.
This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20841
2010-04-13 19:57:25 +00:00
c82bcb2a29
fix jffs2 and mini_fo mount in failsafe (patch from #7134 )
...
SVN-Revision: 20838
2010-04-13 14:24:58 +00:00
135c4b8d05
add debugging entry to hotplug config
...
This is useful for seeing what devices are detected by the system.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20785
2010-04-10 18:35:14 +00:00
a1e4c66c16
base-files: Use hotplug2 to download firmware
...
SVN-Revision: 20683
2010-04-03 18:21:02 +00:00
10c00a6368
base-files: also regenerate wifi config if existing config contains only whitespace
...
SVN-Revision: 20669
2010-04-03 13:31:59 +00:00
043b77a460
base-files: Cancel firmware loading if file doesn't exist
...
SVN-Revision: 20649
2010-04-01 15:22:13 +00:00
b34bba25d2
base-files: fix shell syntax (prevent error messages when activating initscripts in IB)
...
SVN-Revision: 20571
2010-03-29 03:58:17 +00:00
63f49e43e6
base-files: add a hotplug handler for rdate
...
SVN-Revision: 20518
2010-03-27 17:13:33 +00:00
163b15f5bb
base-files: make press key message more explicit in preinit
...
SVN-Revision: 20392
2010-03-23 22:56:12 +00:00
7af8ee0481
change from /jffs to /overlay, patch from Daniel Dickinson
...
SVN-Revision: 20356
2010-03-21 17:16:50 +00:00
3ab30b486f
base-files: reload switch settings on /etc/init.d/network start as well
...
SVN-Revision: 20232
2010-03-15 14:02:49 +00:00
73f61a64eb
fix error output of brctl if bridging is not supported.
...
The following error is displayed during network configuration on any device that has DEVICE_TYPE set to something else then router, or has brctl functionality disabled through some other method:
"brctl: SIOCGIFBR: Package not installed"
This is due to the unbridge function being called, which uses "brctl show" to determine if the interface is bridged.
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
SVN-Revision: 20218
2010-03-14 21:10:07 +00:00
1968fb8da3
base-files: force preinit to use busybox mount ( #6797 )
...
SVN-Revision: 20176
2010-03-13 02:59:05 +00:00
32be7f7605
package/base-files: call preinit_ip_deconfig before processing init on initramfs images
...
SVN-Revision: 20159
2010-03-12 14:37:19 +00:00
d08b2b02cf
base-files: fix preinit code typos
...
Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl>
Acked-by: Daniel Dickinson <cshore@csolve.net>
SVN-Revision: 20124
2010-03-10 18:09:53 +00:00
71886caf3f
firstboot: detect mtd, rom & jffs parts first, fix jffs mounted test
...
SVN-Revision: 19980
2010-03-05 00:53:51 +00:00
32f6e6c44d
revert r19964 for now, there are issues with opkg/ipkg.py generating the status db
...
SVN-Revision: 19970
2010-03-04 02:42:23 +00:00
249d48a68e
grab all config files for installed packages, closes #3718
...
SVN-Revision: 19964
2010-03-03 18:19:19 +00:00
45f7dc9459
firstboot: fix typo ( closes : #6738 )
...
SVN-Revision: 19944
2010-03-01 23:54:45 +00:00
524303b849
base-files: fix enter failsafe message
...
SVN-Revision: 19937
2010-03-01 18:20:39 +00:00
9be4598569
add block-extroot, a package for using an external filesystem as rootfs (patch by cshore)
...
SVN-Revision: 19880
2010-02-26 22:46:10 +00:00
bfeb96126d
add the block-mount package by Daniel Dickinson (cshore), replacing existing automount functionality
...
SVN-Revision: 19877
2010-02-26 22:45:39 +00:00
2e0d14f9c2
base-files: add /dev/hvcX to hotplug common rules
...
SVN-Revision: 19608
2010-02-12 18:57:01 +00:00
250b52f673
base-files: revert dhcp state information on ifdown and restore pre-r19530 behaviour in udhcp default.script
...
SVN-Revision: 19597
2010-02-12 02:06:57 +00:00
9e5844fda2
Here is LVM support for OpenWRT. It introduces 3 new packages: - kmod-dm for the device mapper kernel module. - kmod-libdevmapper for the device-mapper library. - kmod-lvm2 for the lvm tool. Note that it currently does not create the symlinks for all the lvm tools, so you have to use lvm pvs rather than just pvs. Thanks Stefan Monnier
...
SVN-Revision: 19595
2010-02-12 01:37:02 +00:00
275b0d8cd4
Don't do lazy unmounting of filessystems at reboot/poweroff. It is unneeded and could couse a broken filesystem if unmounting takes to long. Thanks to Peter Wagner
...
SVN-Revision: 19568
2010-02-09 18:07:36 +00:00
520ea8e5f9
base-files: fix udhcpc address acquisition on network restart (patch by Scott Dudley)
...
SVN-Revision: 19530
2010-02-05 07:57:07 +00:00
19555b702e
/sbin/wifi: improve reliability of restarts by resetting the state properly
...
SVN-Revision: 19495
2010-02-02 02:19:10 +00:00
7ad9c8615f
base-file: revert unrelated change accidentally committed in r19478
...
SVN-Revision: 19488
2010-02-01 02:00:57 +00:00
e367f5434a
base-files: preinit: get rid of /dev/null redirections and use grep -q where applicable
...
SVN-Revision: 19478
2010-02-01 00:32:46 +00:00
b93682af14
quieten the check for devs, thanks nbd
...
SVN-Revision: 19473
2010-01-31 21:09:53 +00:00
7480065917
/dev/null was used before it was created, so an empty file was created. This prevented the actual device node from being created. The attached patch fixes that, patch from cshore
...
SVN-Revision: 19472
2010-01-31 21:01:21 +00:00
10ec4fa292
when rebooting, use lazy umounts as fallback (patch by puchu)
...
SVN-Revision: 19429
2010-01-30 18:17:57 +00:00
541725ce18
stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu)
...
SVN-Revision: 19428
2010-01-30 18:17:52 +00:00
d46a32fa60
when rebooting, stop the network interfaces last (just before umount) to allow services to shut down properly (thx, puchu)
...
SVN-Revision: 19427
2010-01-30 18:17:48 +00:00
a254a9ff08
base-files: do not warn about nonexistant sysctl overrides (some of them are config dependent)
...
SVN-Revision: 19375
2010-01-29 02:17:11 +00:00
b88fc11e2a
preinit: Remove Ctrl-C prompt...impossible on /dev/console (patch by cshore)
...
SVN-Revision: 19367
2010-01-28 19:27:49 +00:00
785e45786f
base-files: don't build '00_preinit.conf' if CONFIG_PREINITOPT is not selected
...
Also, use the default pi_broadcast address if it is not specified
SVN-Revision: 19346
2010-01-26 14:41:26 +00:00
f596c58ad0
fix missing quote (thx, puchu)
...
SVN-Revision: 19335
2010-01-25 23:03:53 +00:00
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
62d7bb6ecd
fix a typo in the hwmode handling in /sbin/wifi (thx, maddes)
...
SVN-Revision: 19313
2010-01-24 14:27:27 +00:00
8d0bb8f5dd
base-files: ensure that the ip6addr of the main interface stays the primary ip by re-adding it after alias setup is completed - patch by Alina Friedrichsen
...
SVN-Revision: 19303
2010-01-23 22:56:07 +00:00
3634de3b80
base-files: try to activate hotplugged partitions as swap and fall back to lazy mount ( #6517 )
...
SVN-Revision: 19300
2010-01-23 21:58:01 +00:00
bf9917d651
base-files: disable bridge firewalling by default
...
SVN-Revision: 19214
2010-01-18 05:38:44 +00:00
39f2b6d957
base-files: sysupgade library coomon.sh has "bug" in glibc enviorement. For some reason ld-linux.so.3 is not installed at ramfs and sysupgrade always fails. Signed-off-by: Zintis Petersons <zintis.petersons@e-mail.lv>
...
SVN-Revision: 19167
2010-01-16 13:39:13 +00:00
cb30b52ec1
base-files, mac80211 ( #6491 ) - fix wep key handling in iw with mac80211 based drivers - sanitize keys where necessary - put a procedure prepare_key_wep() into /sbin/wifi for use by other driver backends
...
SVN-Revision: 19118
2010-01-13 18:39:44 +00:00
8ec79b460c
run led init after /etc/init.d/done to keep the configured led settings active after the system has finished booting Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
...
SVN-Revision: 19050
2010-01-06 02:34:20 +00:00
406a4a885d
Add udhcpc command-line argument to request rootpath
...
SVN-Revision: 18876
2009-12-21 10:25:15 +00:00
Nicolas Thill
Florian Fainelli
Felix Fietkau
Vasilis Tsiligiannis
Jo-Philipp Wich
Gabor Juhos
Travis Kemen
Lars-Peter Clausen
Hamish Guthrie