05bf6e0f2e
generic/4.0: fix ubi EOF marker patch
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44881
2015-03-19 10:13:21 +00:00
0d8d48641d
generic/4.0: add missing symbols
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44880
2015-03-19 10:11:20 +00:00
b011293d0b
kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44877
2015-03-18 18:22:41 +00:00
17afb853ee
kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4
...
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44876
2015-03-18 18:21:08 +00:00
87568ebeac
b53: reverse duplex bit meaning for IMP state override register
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44875
2015-03-18 10:44:15 +00:00
f30358d41a
kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44873
2015-03-17 17:14:48 +00:00
553528371b
ralink: fix mt7621 i2c name
...
Signed-off-by: zouxf <fl.service@t-firefly.com>
SVN-Revision: 44868
2015-03-17 09:44:14 +00:00
29cf72ac07
lantiq/xrx200: cleanup default packages
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44867
2015-03-17 09:44:06 +00:00
55a71c1374
ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44866
2015-03-17 09:43:56 +00:00
10c5a44017
ar71xx: enable sysupgrade for the OpenMesh OM5P-AN
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44863
2015-03-17 09:43:37 +00:00
85cceb5dd0
ar71xx: add user-space support for the OpenMesh OM5P-AN
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44862
2015-03-17 09:43:31 +00:00
17a1e18ee2
ar71xx: add kernel support for the OpenMesh OM5P-AN board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44861
2015-03-17 09:43:19 +00:00
2a0fcc029f
ar71xx: detect GL.iNet model
...
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44860
2015-03-17 09:43:13 +00:00
986af9e64e
lantiq: make xrx200 targets use the upstream dwc2 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44857
2015-03-17 09:42:56 +00:00
caf94290ce
kernel: add a few more missing config symbols
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44856
2015-03-17 07:24:51 +00:00
76811de003
brcm47xx: support SPROM/NVRAM prefixes
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44855
2015-03-17 07:07:17 +00:00
917fb76321
brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44854
2015-03-17 07:07:00 +00:00
8f63c1405f
brcm47xx: switch to 3.18
...
Tested on BCM5357B0, BCM47186B0 and BCM4706.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44853
2015-03-16 23:05:43 +00:00
7c6f7b716b
bcm53xx: switch to 3.18
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
768cf6821f
x86: refresh kvm_guest kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44851
2015-03-16 21:17:45 +00:00
06cb90f8a2
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44850
2015-03-16 21:17:41 +00:00
6c42f140a0
x86: enable rtl8139 ethernet support for geode by default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44849
2015-03-16 21:00:14 +00:00
1488ed7c2c
brcm63xx: switch maintainer
...
Make Jonas the maintainer of brcm63xx.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 44848
2015-03-16 19:51:17 +00:00
2777b525c6
geode: set target to Geode GX1 to support older chips
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44847
2015-03-16 18:10:17 +00:00
343ec8d645
brcm63xx: use consistent gpio chip labeling for OF/non-OF
...
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44846
2015-03-16 13:37:38 +00:00
81e51681e7
brcm63xx: switch to 3.18
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44841
2015-03-16 11:53:22 +00:00
5d0e2d1b41
brcm63xx: call brcm63xx_detect explicitly
...
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44840
2015-03-16 11:53:14 +00:00
020e5733f9
brcm63xx: move preinit ifname detection to the preinit script
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44839
2015-03-16 11:53:06 +00:00
90da308e3b
brcm63xx: remove obsolete brcm63xx_has_reset_button
...
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44838
2015-03-16 11:52:57 +00:00
f0badcb769
brcm63xx: set status leds from within diag.sh
...
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44837
2015-03-16 11:52:49 +00:00
098377af25
brcm63xx: switch to board_name based configuration
...
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
52ffc6faa7
brcm63xx: add missing board_ids to legacy_detect
...
These boards do not have a corresponding dts file yet.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44835
2015-03-16 11:52:35 +00:00
906c9ef952
brcm63xx: add device tree based board detection
...
Use the device tree model property for detecting the board instead
of board id from nvram if present.
Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44834
2015-03-16 11:52:26 +00:00
844e92e188
brcm63xx: populate /tmp/sysinfo
...
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44833
2015-03-16 11:52:20 +00:00
9c53e344c0
brcm63xx: base-files: rename board_name to board_id
...
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44832
2015-03-16 11:52:16 +00:00
ca7f6d28c8
brcm63xx: Add DGND3700 v1 / DGND3800B support
...
This adds support for the Netgear DGND3700 v1 and DGND3800B.
DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.
The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
4fdb66373f
netlogic: bump to 3.18
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44829
2015-03-16 10:58:43 +00:00
298d67ec7b
mvebu: drop linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44828
2015-03-16 08:29:42 +00:00
d6b3eba475
kernel: add missing MTD_SPLIT_FIT_FW symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44827
2015-03-16 08:05:42 +00:00
c0a15a57bd
sunxi: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44824
2015-03-16 07:41:24 +00:00
eb396d6569
adm5120: drop 3.8 and 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44823
2015-03-16 07:41:19 +00:00
46f01fec7f
ar7: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44822
2015-03-16 07:41:10 +00:00
4d11bb0d23
ixp4xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44821
2015-03-16 07:41:05 +00:00
cc8b6c6d5b
octeon: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44820
2015-03-16 07:40:59 +00:00
a992489e4b
oxnas: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44819
2015-03-16 07:40:54 +00:00
fe33c185bd
mpc85xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44818
2015-03-16 07:40:47 +00:00
518d9fd2a0
cns3xxx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44817
2015-03-16 07:40:41 +00:00
43c66cb434
au1000: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44816
2015-03-16 07:40:19 +00:00
fb78ebb813
ar71xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44815
2015-03-16 07:40:09 +00:00
de04a1d843
realview: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44814
2015-03-16 07:40:02 +00:00
54f1c710db
malta: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44813
2015-03-16 07:39:57 +00:00
257671615b
lantiq: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44812
2015-03-16 07:39:52 +00:00
7648d80c90
ralink: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44811
2015-03-16 07:39:46 +00:00
f2f8f6974b
x86: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44810
2015-03-16 07:12:31 +00:00
9e0759ea26
x86: merge all geode based subtargets into one
...
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44809
2015-03-16 07:05:30 +00:00
986b8baf9a
x86: remove 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44805
2015-03-16 05:57:04 +00:00
7f7e0a21b8
kernel: remove linux 3.13 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44804
2015-03-16 05:52:02 +00:00
f26bb532cf
omap: remove old kernel versions
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44803
2015-03-16 05:51:56 +00:00
495404e9a4
omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44802
2015-03-16 05:51:52 +00:00
c75c90edf6
kernel: port missing ubi EOF marker support patch to 3.19 and 4.0
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44801
2015-03-16 05:16:14 +00:00
adb6d8f93f
kernel: fix duplicate use of patch number 490
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44800
2015-03-16 05:16:07 +00:00
d6fbb77bc8
kernel: add a few missing config symbols for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44799
2015-03-16 04:47:28 +00:00
d5b99a2d74
kernel: add missing description for GRO optimization patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44798
2015-03-16 04:19:09 +00:00
270bc6427b
kernel: skip GRO for packets bridged to other hosts
...
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44797
2015-03-15 20:32:09 +00:00
7ea781558f
ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
...
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44795
2015-03-15 19:39:47 +00:00
7f3013a480
ipq806x: fix AP148 boot from NOR
...
This patch allows AP148 to boot from NOR flash.
As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).
The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44794
2015-03-15 19:39:41 +00:00
582232cd7b
ipq806x: add ap148 bootargs to DT
...
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44793
2015-03-15 19:39:33 +00:00
9a863f803e
kernel: mtdsplit: add support for FIT image
...
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44792
2015-03-15 19:39:27 +00:00
5ca2ad1063
Fix (invert/revert) Hornet-UB WPS LED state
...
My previous patch regarding the Hornet-UB board
(commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.
The above of course is confusing and hence reverting this value
back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
SVN-Revision: 44791
2015-03-15 19:25:48 +00:00
085b8e0014
b53: global config is part of the management page, not the control page
...
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.
Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44788
2015-03-15 14:19:28 +00:00
eed031d460
brcm63xx: brcm63xxpart: fix buffer overrun in of parser
...
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.
Fixes oopses like:
[ 0.920000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.924000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[ 0.940000] 0x000000010000-0x0000003f0000 : "linux"
[ 0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4
[ 0.956000] Oops[#1 ]:
[ 0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[ 0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000
[ 0.956000] $ 0 : 00000000 10008f00 00010203 81049e40
[ 0.956000] $ 4 : 00010203 000000d0 00000000 000000fd
[ 0.956000] $ 8 : 00000000 80015490 00000000 80370000
[ 0.956000] $12 : 00000000 00000001 00000000 2f736269
[ 0.956000] $16 : 00010203 000000d0 8007bde0 81482000
[ 0.956000] $20 : 00000000 00000004 81481f80 803c4b78
[ 0.956000] $24 : 00000000 00000000
[ 0.956000] $28 : 8181e000 8181fbe8 80b20000 801ad5d4
[ 0.956000] Hi : 00000000
[ 0.956000] Lo : 00000000
[ 0.956000] epc : 8028ddf8 strlen+0x4/0x20
[ 0.956000] Not tainted
[ 0.956000] ra : 801ad5d4 kstrdup+0x30/0x84
[ 0.956000] Status: 10008f03 KERNEL EXL IE
[ 0.956000] Cause : 00800008
[ 0.956000] BadVA : 00010203
[ 0.956000] PrId : 0002a010 (Broadcom BMIPS4350)
[ 0.956000] Modules linked in:
[ 0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000)
[ 0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
...
[ 0.956000] Call Trace:
[ 0.956000] [<8028ddf8>] strlen+0x4/0x20
[ 0.956000] [<801ad5d4>] kstrdup+0x30/0x84
[ 0.956000] [<8007bde0>] allocate_partition+0x58/0x93c
[ 0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144
[ 0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc
[ 0.956000] [<801e7870>] of_flash_probe+0x658/0x728
[ 0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60
[ 0.956000] [<801221f4>] driver_probe_device+0xcc/0x214
[ 0.956000] [<800466f8>] __driver_attach+0x7c/0xb4
[ 0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4
[ 0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec
[ 0.956000] [<80122400>] driver_register+0xac/0x100
[ 0.956000] [<80113a5c>] do_one_initcall+0x148/0x204
[ 0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220
[ 0.956000] [<800157bc>] kernel_init+0x10/0x114
[ 0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c
[ 0.956000]
[ 0.956000]
Code: 03e00008 27bd0028 00801021 <80430000> 10600003 00000000 080a377e 24420001 03e00008
[ 1.192000] ---[ end trace 9d89ccbcae27fe40 ]---
[ 1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.200000]
[ 1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44787
2015-03-15 14:19:22 +00:00
9d893d39bd
brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+
...
Fix the module path for linux 3.18+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44785
2015-03-15 14:19:10 +00:00
12301a79b7
brcm63xx: fix 6368 cpu1 reg typo
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44784
2015-03-15 14:19:07 +00:00
d8d9282372
lantiq: add a better fix to strip FCS from ethernet packets on XRX200
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44771
2015-03-15 09:47:34 +00:00
55cdb4dbb3
lantiq: enable atm-esi by default for xrx200
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44769
2015-03-15 07:57:51 +00:00
17fdf5fb85
brcm2708: fix mkdosfs command line options order
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44764
2015-03-15 05:18:50 +00:00
65a0244ff8
x86: refresh kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44759
2015-03-15 04:43:37 +00:00
c062741575
x86: update to kernel 3.18
...
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.
Tested on alix2, soekris net4826 and soekris net4521.
Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 44758
2015-03-15 04:43:30 +00:00
50d4775df0
kernel: fix portability issues of the x86 vdso2c utility
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44757
2015-03-15 04:43:22 +00:00
09ac7d4697
kernel: add missing config symbol for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44756
2015-03-15 04:40:10 +00:00
0a9b7ea932
bcm53xx: support NVRAM prefixes with extra / in devpath
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
578aa97f8c
x86: disable rts/cts for serial console in grub - fixes net48xx boot issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44753
2015-03-14 08:38:35 +00:00
c5aa269d57
kernel: linux 3.19 also needs the network namespace related fd export patch ( #19161 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44751
2015-03-14 05:38:14 +00:00
c7229b96b7
ralink: support change tx/rx ring size
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44741
2015-03-13 08:38:08 +00:00
2c94eef5df
ralink: use random generate mac address instead of default one.
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44740
2015-03-13 08:38:01 +00:00
800da5a02e
ralink: add wifi 5g dts info for cy-swr1100
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44739
2015-03-13 08:37:45 +00:00
7fc700dcca
ath25: set myself as maintainer
...
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44737
2015-03-13 03:02:34 +00:00
1850e0f0a7
Rename 'atheros' target to 'ath25'
...
Rename 'atheros' target to more precise 'ath25'.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44736
2015-03-13 03:02:28 +00:00
558a452e1a
atheros: remove odd board check during image build
...
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44735
2015-03-13 03:02:21 +00:00
cfbaa00914
atheros: remove linux 3.14
...
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44734
2015-03-13 03:02:17 +00:00
99104c3179
atheros: switch to 3.18
...
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44733
2015-03-13 03:02:12 +00:00
ed8cdc3f8d
atheros: v3.18: renumber backported patches
...
Move first 3 patches to 0xx numbers range to denote that this is
backported code and they should be removed when we update
kernel to version >= 3.19
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44732
2015-03-13 03:02:08 +00:00
dae90fc130
atheros: v3.18: non-functional cleanup
...
To finally sync code with upsream cleanup registers headers, and update
several comments and kernel config symbols descriptions. No functional
changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44731
2015-03-13 03:02:00 +00:00
7a46e008fb
atheros: v3.18: cleanup includes
...
Remove odd and add missed includes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44730
2015-03-13 03:01:50 +00:00
1b5b20e51e
atheros: v3.18: rearrange code between patches
...
Cleanup board patch by moving code to specific patches, and factor out
leds to separate patch. No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44729
2015-03-13 03:01:42 +00:00
6d29a8bc64
atheros: v3.18: move GPIO patches behind PCI
...
Move GPIO patches behind PCI patch, since they are not yet merged
upstream.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44728
2015-03-13 03:01:37 +00:00
eb370470d8
atheros: v3.18: switch to IRQ domain
...
Rework MISC and PCI IRQ controllers code to use IRQ domains and bitops.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44727
2015-03-13 03:01:31 +00:00
4a3bd49cf1
atheros: v3.18: update register names
...
Make register names more consistent, mostly add appropriate prefix
(AR5312_ or AR2315_) or _BASE suffix. Also add macro to simplify mask
and shift operation.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44726
2015-03-13 03:01:21 +00:00
9ceee12a49
atheros: v3.18: remap flash for boardconfig parsing
...
Rework boardconfig handling code to honestly remap flash memory region.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44725
2015-03-13 03:01:17 +00:00
6b041d0b1d
atheros: v3.18: make registers headers local
...
There are no external users (last one was PCI driver) for these headers,
so move them to arch directory. Few macroses from ar231x.h header moved
to devices.h and file was removed.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44724
2015-03-13 03:01:11 +00:00
Imre Kaloz
Felix Fietkau
Jonas Gorski
John Crispin
Rafał Miłecki
Florian Fainelli