mirror of https://github.com/hak5/openwrt-owl.git
at91: add support for the WB50N module from Laird
This module from Laird includes the following: - CPU Atmel SoC SAMA5D31 - Wifi QCA6004 - Bluetooth CSR8811 - RAM 64MB LPDDR - FLASH 128MB The flash is a dual image layout, kernel a/b, rootfs a/b, and a user partition. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>owl
Ben Whitten
Hauke Mehrtens
parent
86d037e4a2
commit
f81b353c9f
|
|
@ -0,0 +1,117 @@
|
|||
/*
|
||||
* wb50n.dts - Device Tree file for wb50n board
|
||||
*
|
||||
* Copyright (C) 2015 Laird
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "wb50n.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
|
||||
compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M";
|
||||
};
|
||||
|
||||
ahb {
|
||||
|
||||
apb {
|
||||
mmc0: mmc@f0000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART1 */
|
||||
usart0: serial@f001c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART0 */
|
||||
usart1: serial@f0020000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi1: spi@f8008000 {
|
||||
status = "okay";
|
||||
|
||||
spidev@0 {
|
||||
compatible = "spidev";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <8000000>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: gadget@00500000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: ohci@00600000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
btn0@pa10 {
|
||||
label = "BTNESC";
|
||||
linux,code = <1>; /* ESC button */
|
||||
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
|
||||
irqbtn@pe31 {
|
||||
label = "IRQBTN";
|
||||
linux,code = <99>; /* SysReq button */
|
||||
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
label = "wb50n:blue:led0";
|
||||
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "wb50n:green:led1";
|
||||
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "wb50n:red:led2";
|
||||
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,205 @@
|
|||
/*
|
||||
* wb50n.dts - Device Tree file for wb50n board
|
||||
*
|
||||
* Copyright (C) 2015 Laird
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
#include "sama5d31.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
|
||||
compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
|
||||
apb {
|
||||
pmc: pmc@fffffc00 {
|
||||
main: mainck {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
periphck {
|
||||
usart1_clk: usart1_clk {
|
||||
#clock-cells = <0>;
|
||||
reg = <13>;
|
||||
atmel,clk-output-range = <0 132000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@fffff200 {
|
||||
board {
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mmc0: mmc@f0000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
|
||||
cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1: mmc@f8000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
dmas = <0>, <0>; /* Do not use DMA for dbgu */
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART1 */
|
||||
usart0: serial@f001c000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART0 */
|
||||
usart1: serial@f0020000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
|
||||
dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
|
||||
dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
|
||||
rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
|
||||
usart3: serial@f8024000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi1: spi@f8008000 {
|
||||
cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
|
||||
};
|
||||
|
||||
sckc@fffffe50 {
|
||||
slow_osc: slow_osc {
|
||||
atmel,osc-bypass;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@60000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc;
|
||||
atmel,pmecc-cap = <8>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bs";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
kernel-a@e0000 {
|
||||
label = "kernel-a";
|
||||
reg = <0xe0000 0x500000>;
|
||||
};
|
||||
|
||||
kernel-b@5e0000 {
|
||||
label = "kernel-b";
|
||||
reg = <0x5e0000 0x500000>;
|
||||
};
|
||||
|
||||
rootfs-a@ae0000 {
|
||||
label = "rootfs-a";
|
||||
reg = <0xae0000 0x3000000>;
|
||||
};
|
||||
|
||||
rootfs-b@3ae0000 {
|
||||
label = "rootfs-b";
|
||||
reg = <0x3ae0000 0x3000000>;
|
||||
};
|
||||
|
||||
user@6ae0000 {
|
||||
label = "user";
|
||||
reg = <0x6ae0000 0x14e0000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
usb0: gadget@00500000 {
|
||||
atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
};
|
||||
|
||||
usb1: ohci@00600000 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
|
||||
atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
atheros {
|
||||
compatible = "atheros,ath6kl";
|
||||
atheros,board-id = "SD32";
|
||||
};
|
||||
};
|
||||
|
|
@ -29,3 +29,17 @@ define Device/at91-sama5d4_xplained
|
|||
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 248KiB -c 2082 -x lzo
|
||||
endef
|
||||
TARGET_DEVICES += at91-sama5d4_xplained
|
||||
|
||||
define Device/wb50n
|
||||
$(Device/evaluation-fit)
|
||||
DEVICE_TITLE := Laird WB50N
|
||||
DEVICE_PACKAGES := \
|
||||
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
|
||||
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
|
||||
kmod-leds-gpio
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SUBPAGESIZE := 2048
|
||||
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 955
|
||||
endef
|
||||
TARGET_DEVICES += wb50n
|
||||
|
|
|
|||
|
|
@ -0,0 +1,12 @@
|
|||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -52,7 +52,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
|
||||
sama5d35ek.dtb \
|
||||
sama5d36ek.dtb \
|
||||
at91-sama5d4_xplained.dtb \
|
||||
- at91-sama5d4ek.dtb
|
||||
+ at91-sama5d4ek.dtb \
|
||||
+ wb50n.dtb
|
||||
dtb-$(CONFIG_ARCH_ATLAS6) += \
|
||||
atlas6-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ATLAS7) += \
|
||||
Loading…
Reference in New Issue