kernel: update linux 3.8 to 3.8.6

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215

include/kernel-version.mk

@@ -11,8 +11,8 @@ endif
 ifeq ($(LINUX_VERSION),3.7.10)
   LINUX_KERNEL_MD5SUM:=09624c3702107076efcac5e1cd8a18ec
 endif
-ifeq ($(LINUX_VERSION),3.8.3)
+ifeq ($(LINUX_VERSION),3.8.6)
-  LINUX_KERNEL_MD5SUM:=eb59b1fc7343db96e20c85a9cf2baa9f
+  LINUX_KERNEL_MD5SUM:=80aa1c706e1bc69cc7a1b2c07db90cf9
 endif
 
 # disable the md5sum check for unknown kernel versions

target/linux/adm5120/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 BOARD:=adm5120
 BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 SUBTARGETS:=router_le router_be rb1xx
 INITRAMFS_EXTRA_FILES:=
 

target/linux/ar71xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs jffs2 targz
 CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
 SUBTARGETS:=generic nand
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ar71xx/patches-3.8/902-unaligned_access_hacks.patch

@@ -191,7 +191,7 @@
  /*
 --- a/net/ipv4/tcp_input.c
 +++ b/net/ipv4/tcp_input.c
-@@ -3871,13 +3871,14 @@ static bool tcp_parse_aligned_timestamp(
+@@ -3868,13 +3868,14 @@ static bool tcp_parse_aligned_timestamp(
  {
  	const __be32 *ptr = (const __be32 *)(th + 1);
  
@@ -279,7 +279,7 @@
  #include <asm/uaccess.h>
  
  #include <linux/proc_fs.h>
-@@ -756,10 +757,10 @@ static void tcp_v6_send_response(struct
+@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
  	topt = (__be32 *)(t1 + 1);
  
  	if (ts) {

target/linux/atheros/Makefile

@@ -11,7 +11,7 @@ BOARD:=atheros
 BOARDNAME:=Atheros AR231x/AR5312
 FEATURES:=squashfs jffs2
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch

@@ -130,7 +130,7 @@
  		u32 val = tr32(0x7d00);
  
  		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -4431,6 +4461,15 @@ relink:
+@@ -4439,6 +4469,15 @@ relink:
  	if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
  		tg3_phy_copper_begin(tp);
  
@@ -146,7 +146,7 @@
  		tg3_readphy(tp, MII_BMSR, &bmsr);
  		if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
  		    (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
-@@ -4449,6 +4488,26 @@ relink:
+@@ -4457,6 +4496,26 @@ relink:
  	else
  		tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
  
@@ -173,7 +173,7 @@
  	tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
  	if (tp->link_config.active_duplex == DUPLEX_HALF)
  		tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
-@@ -8427,6 +8486,16 @@ static int tg3_chip_reset(struct tg3 *tp
+@@ -8435,6 +8494,16 @@ static int tg3_chip_reset(struct tg3 *tp
  		tw32(0x5000, 0x400);
  	}
  
@@ -190,7 +190,7 @@
  	tw32(GRC_MODE, tp->grc_mode);
  
  	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -10060,6 +10129,11 @@ static void tg3_timer(unsigned long __op
+@@ -10068,6 +10137,11 @@ static void tg3_timer(unsigned long __op
  	    tg3_flag(tp, 57765_CLASS))
  		tg3_chk_missed_msi(tp);
  
@@ -202,7 +202,7 @@
  	if (!tg3_flag(tp, TAGGED_STATUS)) {
  		/* All of this garbage is because when using non-tagged
  		 * IRQ status the mailbox/status_block protocol the chip
-@@ -12933,7 +13007,8 @@ static int tg3_ioctl(struct net_device *
+@@ -12941,7 +13015,8 @@ static int tg3_ioctl(struct net_device *
  			return -EAGAIN;
  
  		spin_lock_bh(&tp->lock);
@@ -212,7 +212,7 @@
  		spin_unlock_bh(&tp->lock);
  
  		data->val_out = mii_regval;
-@@ -12949,7 +13024,8 @@ static int tg3_ioctl(struct net_device *
+@@ -12957,7 +13032,8 @@ static int tg3_ioctl(struct net_device *
  			return -EAGAIN;
  
  		spin_lock_bh(&tp->lock);
@@ -222,7 +222,7 @@
  		spin_unlock_bh(&tp->lock);
  
  		return err;
-@@ -13802,6 +13878,14 @@ static void tg3_get_5720_nvram_info(stru
+@@ -13810,6 +13886,14 @@ static void tg3_get_5720_nvram_info(stru
  /* Chips other than 5700/5701 use the NVRAM for fetching info. */
  static void tg3_nvram_init(struct tg3 *tp)
  {
@@ -237,7 +237,7 @@
  	tw32_f(GRC_EEPROM_ADDR,
  	     (EEPROM_ADDR_FSM_RESET |
  	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -14294,10 +14378,19 @@ static int tg3_phy_probe(struct tg3 *tp)
+@@ -14302,10 +14386,19 @@ static int tg3_phy_probe(struct tg3 *tp)
  			 * subsys device table.
  			 */
  			p = tg3_lookup_by_subsys(tp);
@@ -259,7 +259,7 @@
  			if (!tp->phy_id ||
  			    tp->phy_id == TG3_PHY_ID_BCM8002)
  				tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
-@@ -15342,6 +15435,11 @@ static int tg3_get_invariants(struct tg3
+@@ -15353,6 +15446,11 @@ static int tg3_get_invariants(struct tg3
  		}
  	}
  
@@ -271,7 +271,7 @@
  	/* Get eeprom hw config before calling tg3_set_power_state().
  	 * In particular, the TG3_FLAG_IS_NIC flag must be
  	 * determined before calling tg3_set_power_state() so that
-@@ -15675,12 +15773,19 @@ static int tg3_get_device_address(struct
+@@ -15686,12 +15784,19 @@ static int tg3_get_device_address(struct
  	struct net_device *dev = tp->dev;
  	u32 hi, lo, mac_offset;
  	int addr_ok = 0;
@@ -291,7 +291,7 @@
  	mac_offset = 0x7c;
  	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
  	    tg3_flag(tp, 5780_CLASS)) {
-@@ -16041,6 +16146,8 @@ static int tg3_test_dma(struct tg3 *tp)
+@@ -16052,6 +16157,8 @@ static int tg3_test_dma(struct tg3 *tp)
  			tp->dma_rwctrl |= 0x001b000f;
  		}
  	}
@@ -300,7 +300,7 @@
  
  	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
  	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
-@@ -16385,6 +16492,18 @@ static int tg3_init_one(struct pci_dev *
+@@ -16396,6 +16503,18 @@ static int tg3_init_one(struct pci_dev *
  	else
  		tp->msg_enable = TG3_DEF_MSG_ENABLE;
  

target/linux/cns21xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Econa CNS21xx
 FEATURES:=squashfs
 CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/cns21xx/patches-3.8/104-cns21xx-usb-ehci-support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -1342,6 +1342,11 @@ MODULE_LICENSE ("GPL");
+@@ -1341,6 +1341,11 @@ MODULE_LICENSE ("GPL");
  #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
  #endif
  

target/linux/cns3xxx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs fpu gpio pcie usb usbgadget
 CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/cns3xxx/patches-3.8/010-move_virtual_io_space.patch

@@ -1,24 +1,3 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -24,17 +24,7 @@ static struct map_desc cns3xxx_io_desc[]
- 	{
- 		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
- 		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
--		.length		= SZ_4K,
--		.type		= MT_DEVICE,
--	}, {
--		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
--		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
--		.length		= SZ_4K,
--		.type		= MT_DEVICE,
--	}, {
--		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
--		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
--		.length		= SZ_4K,
-+		.length		= SZ_8K,
- 		.type		= MT_DEVICE,
- 	}, {
- 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
 +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
 @@ -20,22 +20,22 @@
@@ -71,11 +50,11 @@
  #define RTC_INTR_STS_OFFSET			0x34
  
  #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
--#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+-#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 +#define CNS3XXX_MISC_BASE_VIRT			0xFEF07000	/* Misc Control */
  
  #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
--#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+-#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 +#define CNS3XXX_PM_BASE_VIRT			0xFEF08000
  
  #define PM_CLK_GATE_OFFSET			0x00
@@ -84,7 +63,7 @@
  #define PM_PLL_HM_PD_OFFSET			0x1C
  
  #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
--#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+-#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 +#define CNS3XXX_UART0_BASE_VIRT			0xFEF09000
  
  #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
@@ -112,7 +91,7 @@
 +#define CNS3XXX_I2S_BASE_VIRT			0xFEF10000
  
  #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
--#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 +#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFEF10800
  
  #define TIMER1_COUNTER_OFFSET			0x00
@@ -171,24 +150,17 @@
  
  #define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
  #define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
-@@ -227,19 +227,19 @@
+@@ -227,7 +227,7 @@
   * Testchip peripheral and fpga gic regions
   */
  #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
--#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 +#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFEE00000
  
  #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
--#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+ #define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
-+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFEE00100
+@@ -239,7 +239,7 @@
- 
+ #define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
- #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
--#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
-+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFEE00600
- 
- #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
--#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
-+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFEE01000
  
  #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 -#define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000

target/linux/cns3xxx/patches-3.8/015-clkdev_support.patch

@@ -32,7 +32,7 @@
 +
  static struct map_desc cns3xxx_io_desc[] __initdata = {
  	{
- 		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
+ 		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
 @@ -277,3 +284,33 @@ void __init cns3xxx_l2x0_init(void)
  }
  

target/linux/ep93xx/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs jffs2 ext4 targz usb display sound
 CFLAGS:=-Os -pipe -march=armv4t -fno-caller-saves
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 DEVICE_TYPE:=developerboard
 

target/linux/generic/patches-3.8/060-hso_devices.patch

@@ -15,7 +15,7 @@
  	{USB_DEVICE(0x0af0, 0xd155)},
 --- a/drivers/usb/storage/unusual_devs.h
 +++ b/drivers/usb/storage/unusual_devs.h
-@@ -1237,6 +1237,18 @@ UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0
+@@ -1244,6 +1244,18 @@ UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0
  		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
  		0 ),
  

target/linux/generic/patches-3.8/100-overlayfs.patch

@@ -319,7 +319,7 @@
  		goto out;
 --- a/fs/namespace.c
 +++ b/fs/namespace.c
-@@ -1417,6 +1417,24 @@ void drop_collected_mounts(struct vfsmou
+@@ -1421,6 +1421,24 @@ void drop_collected_mounts(struct vfsmou
  	release_mounts(&umount_list);
  }
  
@@ -3163,7 +3163,7 @@
  static inline bool execute_ok(struct inode *inode)
 --- a/include/linux/mount.h
 +++ b/include/linux/mount.h
-@@ -66,6 +66,9 @@ extern void mnt_pin(struct vfsmount *mnt
+@@ -68,6 +68,9 @@ extern void mnt_pin(struct vfsmount *mnt
  extern void mnt_unpin(struct vfsmount *mnt);
  extern int __mnt_is_readonly(struct vfsmount *mnt);
  

target/linux/generic/patches-3.8/102-ehci_hcd_ignore_oc.patch

@@ -20,7 +20,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
 
 --- a/drivers/usb/host/ehci-hcd.c
 +++ b/drivers/usb/host/ehci-hcd.c
-@@ -630,7 +630,7 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -631,7 +631,7 @@ static int ehci_run (struct usb_hcd *hcd
  		"USB %x.%x started, EHCI %x.%02x%s\n",
  		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
  		temp >> 8, temp & 0xff,

target/linux/generic/patches-3.8/450-mtd_plat_nand_chip_fixup.patch

@@ -5,7 +5,7 @@
 
 --- a/include/linux/mtd/nand.h
 +++ b/include/linux/mtd/nand.h
-@@ -647,6 +647,7 @@ struct platform_nand_chip {
+@@ -654,6 +654,7 @@ struct platform_nand_chip {
  	unsigned int options;
  	unsigned int bbt_options;
  	const char **part_probe_types;

target/linux/generic/patches-3.8/643-bridge_remove_ipv6_dependency.patch

@@ -49,7 +49,7 @@
  
  int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
  		    unsigned char banned_flags)
-@@ -4947,6 +4946,9 @@ int __init addrconf_init(void)
+@@ -4941,6 +4940,9 @@ int __init addrconf_init(void)
  
  	ipv6_addr_label_rtnl_register();
  
@@ -59,7 +59,7 @@
  	return 0;
  errout:
  	rtnl_af_unregister(&inet6_ops);
-@@ -4965,6 +4967,9 @@ void addrconf_cleanup(void)
+@@ -4959,6 +4961,9 @@ void addrconf_cleanup(void)
  	struct net_device *dev;
  	int i;
  

target/linux/generic/patches-3.8/655-increase_skb_pad.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -1722,7 +1722,7 @@ static inline int pskb_network_may_pull(
+@@ -1727,7 +1727,7 @@ static inline int pskb_network_may_pull(
   * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
   */
  #ifndef NET_SKB_PAD

target/linux/generic/patches-3.8/721-phy_packets.patch

@@ -34,7 +34,7 @@
  #define IF_GET_IFACE	0x0001		/* for querying only */
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -1752,6 +1752,10 @@ static inline int pskb_trim(struct sk_bu
+@@ -1757,6 +1757,10 @@ static inline int pskb_trim(struct sk_bu
  	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
  }
  
@@ -45,7 +45,7 @@
  /**
   *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
   *	@skb: buffer to alter
-@@ -1854,16 +1858,6 @@ static inline struct sk_buff *dev_alloc_
+@@ -1859,16 +1863,6 @@ static inline struct sk_buff *dev_alloc_
  }
  
  
@@ -79,7 +79,7 @@
  	help
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -2361,9 +2361,19 @@ int dev_hard_start_xmit(struct sk_buff *
+@@ -2360,9 +2360,19 @@ int dev_hard_start_xmit(struct sk_buff *
  		if (!list_empty(&ptype_all))
  			dev_queue_xmit_nit(skb, dev);
  
@@ -102,7 +102,7 @@
  		if (rc == NETDEV_TX_OK)
  			txq_trans_update(txq);
  		return rc;
-@@ -2386,9 +2396,19 @@ gso:
+@@ -2385,9 +2395,19 @@ gso:
  		if (!list_empty(&ptype_all))
  			dev_queue_xmit_nit(nskb, dev);
  

target/linux/generic/patches-3.8/902-debloat_proc.patch

@@ -173,7 +173,7 @@
  		goto err;
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -4578,9 +4578,11 @@ static int __net_init dev_proc_net_init(
+@@ -4584,9 +4584,11 @@ static int __net_init dev_proc_net_init(
  
  	if (!proc_net_fops_create(net, "dev", S_IRUGO, &dev_seq_fops))
  		goto out;
@@ -187,7 +187,7 @@
  		goto out_softnet;
  
  	if (wext_proc_init(net))
-@@ -4589,9 +4591,11 @@ static int __net_init dev_proc_net_init(
+@@ -4595,9 +4597,11 @@ static int __net_init dev_proc_net_init(
  out:
  	return rc;
  out_ptype:
@@ -201,7 +201,7 @@
  out_dev:
  	proc_net_remove(net, "dev");
  	goto out;
-@@ -4601,8 +4605,10 @@ static void __net_exit dev_proc_net_exit
+@@ -4607,8 +4611,10 @@ static void __net_exit dev_proc_net_exit
  {
  	wext_proc_exit(net);
  

target/linux/generic/patches-3.8/921-use_preinit_as_init.patch

@@ -1,8 +1,6 @@
-Index: linux-3.8.3/init/main.c
+--- a/init/main.c
-===================================================================
++++ b/init/main.c
---- linux-3.8.3.orig/init/main.c	2013-04-02 21:43:30.000000000 +0200
+@@ -835,7 +835,8 @@ static int __ref kernel_init(void *unuse
-+++ linux-3.8.3/init/main.c	2013-04-02 21:44:26.362130897 +0200
-@@ -835,7 +835,8 @@
  		printk(KERN_WARNING "Failed to execute %s.  Attempting "
  					"defaults...\n", execute_command);
  	}

target/linux/lantiq/Makefile

@@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP
 FEATURES:=squashfs jffs2
 SUBTARGETS=xway ase falcon
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
 

target/linux/lantiq/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch

@@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/kernel/prom.c      |   24 ++++++++++++++++++++++++
  3 files changed, 32 insertions(+), 1 deletion(-)
 
-diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
-index 8808bf5..a4ad354 100644
 --- a/arch/mips/include/asm/prom.h
 +++ b/arch/mips/include/asm/prom.h
-@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_param_header *bph);
+@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_
  	__dt_setup_arch(&__dtb_##sym##_begin);				\
  })
  
@@ -29,8 +27,6 @@ index 8808bf5..a4ad354 100644
  #endif /* CONFIG_OF */
  
  #endif /* __ASM_PROM_H */
-diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
-index 135c4aa..9ab3d13 100644
 --- a/arch/mips/kernel/proc.c
 +++ b/arch/mips/kernel/proc.c
 @@ -12,6 +12,7 @@
@@ -41,7 +37,7 @@ index 135c4aa..9ab3d13 100644
  #include <asm/mips_machine.h>
  
  unsigned int vced_count, vcei_count;
-@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
+@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file
  	 */
  	if (n == 0) {
  		seq_printf(m, "system type\t\t: %s\n", get_system_type());
@@ -53,8 +49,6 @@ index 135c4aa..9ab3d13 100644
  			seq_printf(m, "machine\t\t\t: %s\n",
  				   mips_get_machine_name());
  	}
-diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
-index 028f6f8..1aa68a2 100644
 --- a/arch/mips/kernel/prom.c
 +++ b/arch/mips/kernel/prom.c
 @@ -23,6 +23,13 @@
@@ -71,7 +65,7 @@ index 028f6f8..1aa68a2 100644
  int __init early_init_dt_scan_memory_arch(unsigned long node,
  					  const char *uname, int depth,
  					  void *data)
-@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
+@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_a
  }
  #endif
  
@@ -92,7 +86,7 @@ index 028f6f8..1aa68a2 100644
  void __init early_init_devtree(void *params)
  {
  	/* Setup flat device-tree pointer */
-@@ -65,6 +86,9 @@ void __init early_init_devtree(void *params)
+@@ -65,6 +86,9 @@ void __init early_init_devtree(void *par
  	/* Scan memory nodes */
  	of_scan_flat_dt(early_init_dt_scan_root, NULL);
  	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
@@ -102,6 +96,3 @@ index 028f6f8..1aa68a2 100644
  }
  
  void __init __dt_setup_arch(struct boot_param_header *bph)
--- 
-1.7.10.4
-

target/linux/malta/Makefile

@@ -12,7 +12,7 @@ SUBTARGETS:=le be le64 be64
 INITRAMFS_EXTRA_FILES:=
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 DEVICE_TYPE:=developerboard
 

target/linux/mpc52xx/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Freescale MPC52xx
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
 FEATURES:=targz ext4
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mpc83xx/Makefile

@@ -13,7 +13,7 @@ CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
 FEATURES:=squashfs targz
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mpc85xx/Makefile

@@ -13,7 +13,7 @@ CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=8540
 FEATURES:=spe_fpu squashfs
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/mvebu/Makefile

@@ -13,7 +13,7 @@ FEATURES:=targz usb jffs2 pci pcie gpio
 CFLAGS:=-Os -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc40x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=405
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ppc44x/Makefile

@@ -13,7 +13,7 @@ FEATURES:=squashfs broken
 CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=440
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/ramips/Makefile

@@ -13,7 +13,7 @@ SUBTARGETS:=rt288x rt305x rt3883
 CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
 FEATURES:=squashfs gpio
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES+=\

target/linux/ramips/patches-3.8/0001-MIPS-ralink-adds-include-files.patch

@@ -17,9 +17,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4893/
  create mode 100644 arch/mips/include/asm/mach-ralink/war.h
  create mode 100644 arch/mips/ralink/common.h
 
-diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-new file mode 100644
-index 0000000..5a508f9
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
 @@ -0,0 +1,39 @@
@@ -62,9 +59,6 @@ index 0000000..5a508f9
 +}
 +
 +#endif /* _RALINK_REGS_H_ */
-diff --git a/arch/mips/include/asm/mach-ralink/war.h b/arch/mips/include/asm/mach-ralink/war.h
-new file mode 100644
-index 0000000..a7b712c
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/war.h
 @@ -0,0 +1,25 @@
@@ -93,9 +87,6 @@ index 0000000..a7b712c
 +#define MIPS34K_MISSED_ITLB_WAR		0
 +
 +#endif /* __ASM_MACH_RALINK_WAR_H */
-diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
-new file mode 100644
-index 0000000..3009903
 --- /dev/null
 +++ b/arch/mips/ralink/common.h
 @@ -0,0 +1,44 @@
@@ -143,6 +134,3 @@ index 0000000..3009903
 +__iomem void *plat_of_remap_node(const char *node);
 +
 +#endif /* _RALINK_COMMON_H__ */
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0002-MIPS-ralink-adds-irq-code.patch

@@ -14,9 +14,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4890/
  1 file changed, 176 insertions(+)
  create mode 100644 arch/mips/ralink/irq.c
 
-diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
-new file mode 100644
-index 0000000..e62c975
 --- /dev/null
 +++ b/arch/mips/ralink/irq.c
 @@ -0,0 +1,176 @@
@@ -196,6 +193,3 @@ index 0000000..e62c975
 +	of_irq_init(of_irq_ids);
 +}
 +
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0003-MIPS-ralink-adds-reset-code.patch

@@ -13,9 +13,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4891/
  1 file changed, 44 insertions(+)
  create mode 100644 arch/mips/ralink/reset.c
 
-diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
-new file mode 100644
-index 0000000..22120e5
 --- /dev/null
 +++ b/arch/mips/ralink/reset.c
 @@ -0,0 +1,44 @@
@@ -63,6 +60,3 @@ index 0000000..22120e5
 +}
 +
 +arch_initcall(mips_reboot_setup);
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0004-MIPS-ralink-adds-prom-and-cmdline-code.patch

@@ -13,9 +13,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4892/
  1 file changed, 69 insertions(+)
  create mode 100644 arch/mips/ralink/prom.c
 
-diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
-new file mode 100644
-index 0000000..9c64f02
 --- /dev/null
 +++ b/arch/mips/ralink/prom.c
 @@ -0,0 +1,69 @@
@@ -88,6 +85,3 @@ index 0000000..9c64f02
 +void __init prom_free_prom_memory(void)
 +{
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0005-MIPS-ralink-adds-clkdev-code.patch

@@ -14,9 +14,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4894/
  1 file changed, 72 insertions(+)
  create mode 100644 arch/mips/ralink/clk.c
 
-diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
-new file mode 100644
-index 0000000..8dfa22f
 --- /dev/null
 +++ b/arch/mips/ralink/clk.c
 @@ -0,0 +1,72 @@
@@ -92,6 +89,3 @@ index 0000000..8dfa22f
 +	mips_hpt_frequency = clk_get_rate(clk) / 2;
 +	clk_put(clk);
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0006-MIPS-ralink-adds-OF-code.patch

@@ -15,9 +15,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4895/
  1 file changed, 107 insertions(+)
  create mode 100644 arch/mips/ralink/of.c
 
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-new file mode 100644
-index 0000000..4165e70
 --- /dev/null
 +++ b/arch/mips/ralink/of.c
 @@ -0,0 +1,107 @@
@@ -128,6 +125,3 @@ index 0000000..4165e70
 +}
 +
 +arch_initcall(plat_of_setup);
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0007-MIPS-ralink-adds-early_printk-support.patch

@@ -13,9 +13,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4897/
  1 file changed, 44 insertions(+)
  create mode 100644 arch/mips/ralink/early_printk.c
 
-diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
-new file mode 100644
-index 0000000..c4ae47e
 --- /dev/null
 +++ b/arch/mips/ralink/early_printk.c
 @@ -0,0 +1,44 @@
@@ -63,6 +60,3 @@ index 0000000..c4ae47e
 +	while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
 +		;
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0008-MIPS-ralink-adds-support-for-RT305x-SoC-family.patch

@@ -17,9 +17,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4896/
  create mode 100644 arch/mips/include/asm/mach-ralink/rt305x.h
  create mode 100644 arch/mips/ralink/rt305x.c
 
-diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
-new file mode 100644
-index 0000000..7d344f2
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
 @@ -0,0 +1,139 @@
@@ -162,9 +159,6 @@ index 0000000..7d344f2
 +#define RT305X_GPIO_MODE_RGMII		BIT(9)
 +
 +#endif
-diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
-new file mode 100644
-index 0000000..0a4bbdc
 --- /dev/null
 +++ b/arch/mips/ralink/rt305x.c
 @@ -0,0 +1,242 @@
@@ -410,6 +404,3 @@ index 0000000..0a4bbdc
 +		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
 +		(id & CHIP_ID_REV_MASK));
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0009-MIPS-ralink-adds-rt305x-devicetree.patch

@@ -15,9 +15,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4898/
  create mode 100644 arch/mips/ralink/dts/rt3050.dtsi
  create mode 100644 arch/mips/ralink/dts/rt3052_eval.dts
 
-diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
-new file mode 100644
-index 0000000..fd49daa
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 @@ -0,0 +1,96 @@
@@ -117,9 +114,6 @@ index 0000000..fd49daa
 +		};
 +	};
 +};
-diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
-new file mode 100644
-index 0000000..148a590
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3052_eval.dts
 @@ -0,0 +1,52 @@
@@ -175,6 +169,3 @@ index 0000000..148a590
 +		};
 +	};
 +};
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0010-MIPS-ralink-adds-Kbuild-files.patch

@@ -22,8 +22,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4899/
  create mode 100644 arch/mips/ralink/Platform
  create mode 100644 arch/mips/ralink/dts/Makefile
 
-diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
-index 91b9d69..9a73ce6 100644
 --- a/arch/mips/Kbuild.platforms
 +++ b/arch/mips/Kbuild.platforms
 @@ -22,6 +22,7 @@ platforms += pmc-sierra
@@ -34,11 +32,9 @@ index 91b9d69..9a73ce6 100644
  platforms += rb532
  platforms += sgi-ip22
  platforms += sgi-ip27
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index 8f8666c..79ad1d0 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -437,6 +437,22 @@ config POWERTV
+@@ -434,6 +434,22 @@ config POWERTV
  	help
  	  This enables support for the Cisco PowerTV Platform.
  
@@ -61,7 +57,7 @@ index 8f8666c..79ad1d0 100644
  config SGI_IP22
  	bool "SGI IP22 (Indy/Indigo2)"
  	select FW_ARC
-@@ -849,6 +865,7 @@ source "arch/mips/lantiq/Kconfig"
+@@ -846,6 +862,7 @@ source "arch/mips/lantiq/Kconfig"
  source "arch/mips/lasat/Kconfig"
  source "arch/mips/pmc-sierra/Kconfig"
  source "arch/mips/powertv/Kconfig"
@@ -69,9 +65,6 @@ index 8f8666c..79ad1d0 100644
  source "arch/mips/sgi-ip27/Kconfig"
  source "arch/mips/sibyte/Kconfig"
  source "arch/mips/txx9/Kconfig"
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-new file mode 100644
-index 0000000..a0b0197
 --- /dev/null
 +++ b/arch/mips/ralink/Kconfig
 @@ -0,0 +1,32 @@
@@ -107,9 +100,6 @@ index 0000000..a0b0197
 +endchoice
 +
 +endif
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-new file mode 100644
-index 0000000..939757f
 --- /dev/null
 +++ b/arch/mips/ralink/Makefile
 @@ -0,0 +1,15 @@
@@ -128,9 +118,6 @@ index 0000000..939757f
 +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 +
 +obj-y += dts/
-diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
-new file mode 100644
-index 0000000..6babd65
 --- /dev/null
 +++ b/arch/mips/ralink/Platform
 @@ -0,0 +1,10 @@
@@ -144,13 +131,7 @@ index 0000000..6babd65
 +# Ralink RT305x
 +#
 +load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
-diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
-new file mode 100644
-index 0000000..1a69fb3
 --- /dev/null
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -0,0 +1 @@
 +obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0011-MIPS-ralink-adds-default-config-file.patch

@@ -9,9 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  1 file changed, 167 insertions(+)
  create mode 100644 arch/mips/configs/rt305x_defconfig
 
-diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
-new file mode 100644
-index 0000000..d1741bc
 --- /dev/null
 +++ b/arch/mips/configs/rt305x_defconfig
 @@ -0,0 +1,167 @@
@@ -182,6 +179,3 @@ index 0000000..d1741bc
 +# CONFIG_XZ_DEC_ARMTHUMB is not set
 +# CONFIG_XZ_DEC_SPARC is not set
 +CONFIG_AVERAGE=y
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0012-Document-devicetree-add-OF-documents-for-MIPS-interr.patch

@@ -12,9 +12,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4901/
  1 file changed, 47 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mips/cpu_irq.txt
 
-diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
-new file mode 100644
-index 0000000..13aa4b6
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
 @@ -0,0 +1,47 @@
@@ -65,6 +62,3 @@ index 0000000..13aa4b6
 +{
 +	of_irq_init(of_irq_ids);
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0013-MIPS-add-irqdomain-support-for-the-CPU-IRQ-controlle.patch

@@ -15,8 +15,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4902/
  arch/mips/kernel/irq_cpu.c      |   42 +++++++++++++++++++++++++++++++++++++++
  2 files changed, 48 insertions(+)
 
-diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
-index ef6a07c..3f11fdb 100644
 --- a/arch/mips/include/asm/irq_cpu.h
 +++ b/arch/mips/include/asm/irq_cpu.h
 @@ -17,4 +17,10 @@ extern void mips_cpu_irq_init(void);
@@ -30,8 +28,6 @@ index ef6a07c..3f11fdb 100644
 +#endif
 +
  #endif /* _ASM_IRQ_CPU_H */
-diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
-index 972263b..49bc9ca 100644
 --- a/arch/mips/kernel/irq_cpu.c
 +++ b/arch/mips/kernel/irq_cpu.c
 @@ -31,6 +31,7 @@
@@ -87,6 +83,3 @@ index 972263b..49bc9ca 100644
 +	return 0;
 +}
 +#endif /* CONFIG_IRQ_DOMAIN */
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0014-MIPS-ralink-add-CPU-interrupt-controller-to-of_irq_i.patch

@@ -16,8 +16,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/4900/
  arch/mips/ralink/irq.c           |   10 +++++++---
  2 files changed, 17 insertions(+), 3 deletions(-)
 
-diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
-index fd49daa..069d066 100644
 --- a/arch/mips/ralink/dts/rt3050.dtsi
 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 @@ -13,6 +13,13 @@
@@ -44,11 +42,9 @@ index fd49daa..069d066 100644
  		};
  
  		memc@300 {
-diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
-index e62c975..6d054c5 100644
 --- a/arch/mips/ralink/irq.c
 +++ b/arch/mips/ralink/irq.c
-@@ -128,8 +128,11 @@ static int __init intc_of_init(struct device_node *node,
+@@ -128,8 +128,11 @@ static int __init intc_of_init(struct de
  {
  	struct resource res;
  	struct irq_domain *domain;
@@ -61,7 +57,7 @@ index e62c975..6d054c5 100644
  
  	if (of_address_to_resource(node, 0, &res))
  		panic("Failed to get intc memory range");
-@@ -156,8 +159,8 @@ static int __init intc_of_init(struct device_node *node,
+@@ -156,8 +159,8 @@ static int __init intc_of_init(struct de
  
  	rt_intc_w32(INTC_INT_GLOBAL, INTC_REG_ENABLE);
  
@@ -72,7 +68,7 @@ index e62c975..6d054c5 100644
  
  	cp0_perfcount_irq = irq_create_mapping(domain, 9);
  
-@@ -165,6 +168,7 @@ static int __init intc_of_init(struct device_node *node,
+@@ -165,6 +168,7 @@ static int __init intc_of_init(struct de
  }
  
  static struct of_device_id __initdata of_irq_ids[] = {
@@ -80,6 +76,3 @@ index e62c975..6d054c5 100644
  	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
  	{},
  };
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0015-serial-ralink-adds-support-for-the-serial-core-found.patch

@@ -15,11 +15,9 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
  include/linux/serial_core.h     |    2 +-
  3 files changed, 12 insertions(+), 4 deletions(-)
 
-diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
-index 24939ca..0efc815 100644
 --- a/drivers/tty/serial/8250/8250.c
 +++ b/drivers/tty/serial/8250/8250.c
-@@ -317,9 +317,9 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
+@@ -345,9 +345,9 @@ static void default_serial_dl_write(stru
  	serial_out(up, UART_DLM, value >> 8 & 0xff);
  }
  
@@ -31,20 +29,18 @@ index 24939ca..0efc815 100644
  static const u8 au_io_in_map[] = {
  	[UART_RX]  = 0,
  	[UART_IER] = 2,
-@@ -440,7 +440,7 @@ static void set_io_from_upio(struct uart_port *p)
+@@ -527,7 +527,7 @@ static void set_io_from_upio(struct uart
- 		p->serial_out = mem32_serial_out;
  		break;
+ #endif
  
 -#ifdef CONFIG_MIPS_ALCHEMY
 +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
  	case UPIO_AU:
  		p->serial_in = au_serial_in;
  		p->serial_out = au_serial_out;
-diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
-index d31f4c6..2ef9537 100644
 --- a/drivers/tty/serial/8250/Kconfig
 +++ b/drivers/tty/serial/8250/Kconfig
-@@ -276,3 +276,11 @@ config SERIAL_8250_EM
+@@ -277,3 +277,11 @@ config SERIAL_8250_EM
  	  Selecting this option will add support for the integrated serial
  	  port hardware found on the Emma Mobile line of processors.
  	  If unsure, say N.
@@ -56,8 +52,6 @@ index d31f4c6..2ef9537 100644
 +	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
 +	  serial port, say Y to this option. The driver can handle up to 2 serial
 +	  ports. If unsure, say N.
-diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
-index 82aebc8..d971421 100644
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
 @@ -134,7 +134,7 @@ struct uart_port {
@@ -67,8 +61,5 @@ index 82aebc8..d971421 100644
 -#define UPIO_AU			(4)			/* Au1x00 type IO */
 +#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
  #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
- 
+ #define UPIO_RM9000		(6)			/* RM9000 type IO */
- 	unsigned int		read_status_mask;	/* driver specific */
--- 
-1.7.10.4
  

target/linux/ramips/patches-3.8/0100-MIPS-ralink-fix-RT305x-clock-setup.patch

@@ -10,8 +10,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/rt305x.c |   14 ++++++++++++++
  1 file changed, 14 insertions(+)
 
-diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
-index 0a4bbdc..856ebff 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
 @@ -125,6 +125,7 @@ void __init ralink_clk_init(void)
@@ -47,6 +45,3 @@ index 0a4bbdc..856ebff 100644
  }
  
  void __init ralink_of_remap(void)
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-missing-comment-in-irq-driver.patch

@@ -10,11 +10,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/irq.c |    1 +
  1 file changed, 1 insertion(+)
 
-diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
-index 6d054c5..ed613b0 100644
 --- a/arch/mips/ralink/irq.c
 +++ b/arch/mips/ralink/irq.c
-@@ -162,6 +162,7 @@ static int __init intc_of_init(struct device_node *node,
+@@ -162,6 +162,7 @@ static int __init intc_of_init(struct de
  	irq_set_chained_handler(irq, ralink_intc_irq_handler);
  	irq_set_handler_data(irq, domain);
  
@@ -22,6 +20,3 @@ index 6d054c5..ed613b0 100644
  	cp0_perfcount_irq = irq_create_mapping(domain, 9);
  
  	return 0;
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT5350-sdram-register-defines.patch

@@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/include/asm/mach-ralink/rt305x.h |    8 ++++++++
  1 file changed, 8 insertions(+)
 
-diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
-index 7d344f2..4e62cef 100644
 --- a/arch/mips/include/asm/mach-ralink/rt305x.h
 +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
 @@ -97,6 +97,14 @@ static inline int soc_is_rt5350(void)
@@ -30,6 +28,3 @@ index 7d344f2..4e62cef 100644
  /* multi function gpio pins */
  #define RT305X_GPIO_I2C_SD		1
  #define RT305X_GPIO_I2C_SCLK		2
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0103-MIPS-ralink-add-RT3352-usb-register-defines.patch

@@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/include/asm/mach-ralink/rt305x.h |   11 +++++++++++
  1 file changed, 11 insertions(+)
 
-Index: linux-3.8.3/arch/mips/include/asm/mach-ralink/rt305x.h
+--- a/arch/mips/include/asm/mach-ralink/rt305x.h
-===================================================================
++++ b/arch/mips/include/asm/mach-ralink/rt305x.h
---- linux-3.8.3.orig/arch/mips/include/asm/mach-ralink/rt305x.h	2013-04-02 13:30:35.601424833 +0200
+@@ -144,4 +144,18 @@ static inline int soc_is_rt5350(void)
-+++ linux-3.8.3/arch/mips/include/asm/mach-ralink/rt305x.h	2013-04-02 13:39:37.721437754 +0200
-@@ -144,4 +144,18 @@
  #define RT305X_GPIO_MODE_SDRAM		BIT(8)
  #define RT305X_GPIO_MODE_RGMII		BIT(9)
  

target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-pinmux-driver.patch

@@ -17,8 +17,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  5 files changed, 85 insertions(+), 6 deletions(-)
  create mode 100644 arch/mips/ralink/pinmux.c
 
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 939757f..39ef249 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -6,7 +6,7 @@
@@ -30,8 +28,6 @@ index 939757f..39ef249 100644
  
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
  
-diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
-index 3009903..ed99f23 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
 @@ -22,9 +22,10 @@ struct ralink_pinmux {
@@ -46,15 +42,13 @@ index 3009903..ed99f23 100644
  
  struct ralink_soc_info {
  	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
-@@ -41,4 +42,6 @@ extern void prom_soc_init(struct ralink_soc_info *soc_info);
+@@ -41,4 +42,6 @@ extern void prom_soc_init(struct ralink_
  
  __iomem void *plat_of_remap_node(const char *node);
  
 +void ralink_pinmux(void);
 +
  #endif /* _RALINK_COMMON_H__ */
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 4165e70..ecf1482 100644
 --- a/arch/mips/ralink/of.c
 +++ b/arch/mips/ralink/of.c
 @@ -101,6 +101,8 @@ static int __init plat_of_setup(void)
@@ -66,9 +60,6 @@ index 4165e70..ecf1482 100644
  	return 0;
  }
  
-diff --git a/arch/mips/ralink/pinmux.c b/arch/mips/ralink/pinmux.c
-new file mode 100644
-index 0000000..7477deb
 --- /dev/null
 +++ b/arch/mips/ralink/pinmux.c
 @@ -0,0 +1,76 @@
@@ -148,8 +139,6 @@ index 0000000..7477deb
 +
 +	rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
 +}
-diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
-index 856ebff..d9ea53d 100644
 --- a/arch/mips/ralink/rt305x.c
 +++ b/arch/mips/ralink/rt305x.c
 @@ -97,9 +97,6 @@ struct ralink_pinmux_grp uart_mux[] = {
@@ -175,6 +164,3 @@ index 856ebff..d9ea53d 100644
  	.wdt_reset = rt305x_wdt_reset,
  };
  
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0105-MIPS-extend-RT3050-dtsi-file.patch

@@ -10,8 +10,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/dts/rt3050.dtsi |   96 ++++++++++++++++++++++++++++++++------
  1 file changed, 81 insertions(+), 15 deletions(-)
 
-diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
-index 069d066..5aede8d 100644
 --- a/arch/mips/ralink/dts/rt3050.dtsi
 +++ b/arch/mips/ralink/dts/rt3050.dtsi
 @@ -1,7 +1,7 @@
@@ -159,6 +157,3 @@ index 069d066..5aede8d 100644
 +		status = "disabled";
  	};
  };
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0106-MIPS-add-RT5350-dtsi-file.patch

@@ -12,9 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  1 file changed, 181 insertions(+)
  create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
 
-diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
-new file mode 100644
-index 0000000..9ca95a3
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt5350.dtsi
 @@ -0,0 +1,181 @@
@@ -199,6 +196,3 @@ index 0000000..9ca95a3
 +		status = "disabled";
 +	};
 +};
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0107-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch

@@ -19,11 +19,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h
  create mode 100644 arch/mips/ralink/rt288x.c
 
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index cd2e21f..490d769 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1152,7 +1152,7 @@ config BOOT_ELF32
+@@ -1189,7 +1189,7 @@ config BOOT_ELF32
  
  config MIPS_L1_CACHE_SHIFT
  	int
@@ -32,9 +30,6 @@ index cd2e21f..490d769 100644
  	default "6" if MIPS_CPU_SCACHE
  	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
  	default "5"
-diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
-new file mode 100644
-index 0000000..ad8b42d
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt288x.h
 @@ -0,0 +1,49 @@
@@ -87,8 +82,6 @@ index 0000000..ad8b42d
 +#define CLKCFG_SRAM_CS_N_WDT		BIT(9)
 +
 +#endif
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index a0b0197..6723b94 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -6,6 +6,9 @@ choice
@@ -101,8 +94,6 @@ index a0b0197..6723b94 100644
  	config SOC_RT305X
  		bool "RT305x"
  		select USB_ARCH_HAS_HCD
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 39ef249..ce83bfc 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -8,6 +8,7 @@
@@ -113,11 +104,9 @@ index 39ef249..ce83bfc 100644
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
-index 6babd65..3f49e51 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK)		+= arch/mips/ralink/
+@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK)		+= arch/mips/rali
  cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
  
  #
@@ -129,9 +118,6 @@ index 6babd65..3f49e51 100644
  # Ralink RT305x
  #
  load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
-diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
-new file mode 100644
-index 0000000..37faff0
 --- /dev/null
 +++ b/arch/mips/ralink/rt288x.c
 @@ -0,0 +1,141 @@
@@ -276,6 +262,3 @@ index 0000000..37faff0
 +		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
 +		(id & CHIP_ID_REV_MASK));
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0108-MIPS-add-rt2880-dts-files.patch

@@ -16,8 +16,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
  create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts
 
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 6723b94..0d312fc 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -26,6 +26,10 @@ choice
@@ -31,16 +29,11 @@ index 6723b94..0d312fc 100644
  	config DTB_RT305X_EVAL
  		bool "RT305x eval kit"
  		depends on SOC_RT305X
-diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
-index 1a69fb3..f635a01 100644
 --- a/arch/mips/ralink/dts/Makefile
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -1 +1,2 @@
 +obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
-diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
-new file mode 100644
-index 0000000..b51c227
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt2880.dtsi
 @@ -0,0 +1,116 @@
@@ -160,9 +153,6 @@ index 0000000..b51c227
 +		};
 +	};
 +};
-diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
-new file mode 100644
-index 0000000..7c74e16
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt2880_eval.dts
 @@ -0,0 +1,52 @@
@@ -218,6 +208,3 @@ index 0000000..7c74e16
 +		};
 +	};
 +};
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0109-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch

@@ -18,9 +18,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h
  create mode 100644 arch/mips/ralink/rt3883.c
 
-diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
-new file mode 100644
-index 0000000..b91c6c1
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/rt3883.h
 @@ -0,0 +1,247 @@
@@ -271,8 +268,6 @@ index 0000000..b91c6c1
 +#define RT3883_FLASH_CFG_WIDTH_32BIT	0x2
 +
 +#endif /* _RT3883_REGS_H_ */
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 0d312fc..f21cbaa 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -15,6 +15,11 @@ choice
@@ -287,11 +282,9 @@ index 0d312fc..f21cbaa 100644
  endchoice
  
  choice
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index ce83bfc..87f6ca9 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
-@@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o
+@@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
  
  obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
@@ -299,11 +292,9 @@ index ce83bfc..87f6ca9 100644
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
-diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
-index 3f49e51..f67c08d 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
+@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X)	+= 0xffffffff8
  # Ralink RT305x
  #
  load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
@@ -312,9 +303,6 @@ index 3f49e51..f67c08d 100644
 +# Ralink RT3883
 +#
 +load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
-diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
-new file mode 100644
-index 0000000..10a8150
 --- /dev/null
 +++ b/arch/mips/ralink/rt3883.c
 @@ -0,0 +1,207 @@
@@ -525,6 +513,3 @@ index 0000000..10a8150
 +		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
 +		(id & RT3883_REVID_ECO_ID_MASK));
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch

@@ -17,8 +17,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/ralink/dts/rt3883.dtsi
  create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts
 
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index f21cbaa..2ef69ee 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -39,6 +39,10 @@ choice
@@ -32,17 +30,12 @@ index f21cbaa..2ef69ee 100644
  endchoice
  
  endif
-diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
-index f635a01..040a986 100644
 --- a/arch/mips/ralink/dts/Makefile
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -1,2 +1,3 @@
  obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
 +obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
-diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
-new file mode 100644
-index 0000000..1e80ad3
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3883.dtsi
 @@ -0,0 +1,186 @@
@@ -232,9 +225,6 @@ index 0000000..1e80ad3
 +		status = "disabled";
 +	};
 +};
-diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts
-new file mode 100644
-index 0000000..d4c06ed
 --- /dev/null
 +++ b/arch/mips/ralink/dts/rt3883_eval.dts
 @@ -0,0 +1,52 @@
@@ -290,6 +280,3 @@ index 0000000..d4c06ed
 +		};
 +	};
 +};
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch

@@ -18,9 +18,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h
  create mode 100644 arch/mips/ralink/mt7620.c
 
-diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
-new file mode 100644
-index 0000000..3d51235
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/mt7620.h
 @@ -0,0 +1,66 @@
@@ -90,8 +87,6 @@ index 0000000..3d51235
 +#define MT7620_GPIO_MODE_WDT		BIT(22)
 +
 +#endif
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 2ef69ee..493411f 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -20,6 +20,9 @@ choice
@@ -104,11 +99,9 @@ index 2ef69ee..493411f 100644
  endchoice
  
  choice
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 87f6ca9..341b4de 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
-@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o
+@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
  obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
  obj-$(CONFIG_SOC_RT3883) += rt3883.o
@@ -116,11 +109,9 @@ index 87f6ca9..341b4de 100644
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
-diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
-index f67c08d..b2cbf16 100644
 --- a/arch/mips/ralink/Platform
 +++ b/arch/mips/ralink/Platform
-@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X)	+= 0xffffffff8
  # Ralink RT3883
  #
  load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
@@ -129,9 +120,6 @@ index f67c08d..b2cbf16 100644
 +# Ralink MT7620
 +#
 +load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-new file mode 100644
-index 0000000..9d0dc8b
 --- /dev/null
 +++ b/arch/mips/ralink/mt7620.c
 @@ -0,0 +1,215 @@
@@ -350,6 +338,3 @@ index 0000000..9d0dc8b
 +		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
 +		(rev & CHIP_REV_ECO_MASK));
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0112-MIPS-add-MT7620-dts-files.patch

@@ -16,8 +16,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/ralink/dts/mt7620.dtsi
  create mode 100644 arch/mips/ralink/dts/mt7620_eval.dts
 
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 493411f..8254502 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -46,6 +46,10 @@ choice
@@ -31,8 +29,6 @@ index 493411f..8254502 100644
  endchoice
  
  endif
-diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
-index 040a986..036603a 100644
 --- a/arch/mips/ralink/dts/Makefile
 +++ b/arch/mips/ralink/dts/Makefile
 @@ -1,3 +1,4 @@
@@ -40,9 +36,6 @@ index 040a986..036603a 100644
  obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
  obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
 +obj-$(CONFIG_DTB_MT7620_EVAL) := mt7620_eval.dtb.o
-diff --git a/arch/mips/ralink/dts/mt7620.dtsi b/arch/mips/ralink/dts/mt7620.dtsi
-new file mode 100644
-index 0000000..59f057f
 --- /dev/null
 +++ b/arch/mips/ralink/dts/mt7620.dtsi
 @@ -0,0 +1,138 @@
@@ -184,9 +177,6 @@ index 0000000..59f057f
 +		};
 +	};
 +};
-diff --git a/arch/mips/ralink/dts/mt7620_eval.dts b/arch/mips/ralink/dts/mt7620_eval.dts
-new file mode 100644
-index 0000000..dda0f4d
 --- /dev/null
 +++ b/arch/mips/ralink/dts/mt7620_eval.dts
 @@ -0,0 +1,22 @@
@@ -212,6 +202,3 @@ index 0000000..dda0f4d
 +		};
 +	};
 +};
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0113-MIPS-ralink-add-support-for-periodic-timer-irq.patch

@@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  2 files changed, 193 insertions(+), 1 deletion(-)
  create mode 100644 arch/mips/ralink/timer.c
 
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 341b4de..cae7d88 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -6,7 +6,7 @@
@@ -25,9 +23,6 @@ index 341b4de..cae7d88 100644
  
  obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o
-diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
-new file mode 100644
-index 0000000..9a943e8
 --- /dev/null
 +++ b/arch/mips/ralink/timer.c
 @@ -0,0 +1,192 @@
@@ -223,6 +218,3 @@ index 0000000..9a943e8
 +MODULE_DESCRIPTION("Ralink RT2880 timer");
 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
 +MODULE_LICENSE("GPL");
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0114-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch

@@ -17,11 +17,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
  create mode 100644 drivers/gpio/gpio-ralink.c
 
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index 490d769..1db6ce9 100644
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -443,6 +443,7 @@ config RALINK
+@@ -449,6 +449,7 @@ config RALINK
  	select SYS_HAS_EARLY_PRINTK
  	select HAVE_MACH_CLKDEV
  	select CLKDEV_LOOKUP
@@ -29,9 +27,6 @@ index 490d769..1db6ce9 100644
  
  config SGI_IP22
  	bool "SGI IP22 (Indy/Indigo2)"
-diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
-new file mode 100644
-index 0000000..f68ee16
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ralink/gpio.h
 @@ -0,0 +1,24 @@
@@ -59,11 +54,9 @@ index 0000000..f68ee16
 +#define gpio_to_irq	__gpio_to_irq
 +
 +#endif /* __ASM_MACH_RALINK_GPIO_H */
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 93aaadf..29add97 100644
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -204,6 +204,12 @@ config GPIO_PXA
+@@ -201,6 +201,12 @@ config GPIO_PXA
  	help
  	  Say yes here to support the PXA GPIO device
  
@@ -76,11 +69,9 @@ index 93aaadf..29add97 100644
  config GPIO_SPEAR_SPICS
  	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
  	depends on PLAT_SPEAR
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 22e07bc..f7b6603 100644
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
+@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf85
  obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
  obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
  obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
@@ -88,9 +79,6 @@ index 22e07bc..f7b6603 100644
  obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
  obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
  obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
-diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
-new file mode 100644
-index 0000000..26e8441
 --- /dev/null
 +++ b/drivers/gpio/gpio-ralink.c
 @@ -0,0 +1,176 @@
@@ -270,6 +258,3 @@ index 0000000..26e8441
 +}
 +
 +subsys_initcall(ralink_gpio_init);
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0115-SPI-ralink-add-Ralink-SoC-spi-driver.patch

@@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 479 insertions(+)
  create mode 100644 drivers/spi/spi-ralink.c
 
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index f80eee7..301dbad 100644
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -326,6 +326,12 @@ config SPI_RSPI
+@@ -324,6 +324,12 @@ config SPI_RSPI
  	help
  	  SPI driver for Renesas RSPI blocks.
  
@@ -29,22 +27,17 @@ index f80eee7..301dbad 100644
 +
  config SPI_S3C24XX
  	tristate "Samsung S3C24XX series SPI"
- 	depends on ARCH_S3C24XX
+ 	depends on ARCH_S3C24XX && EXPERIMENTAL
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index e53c309..a4b3c5b 100644
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -53,6 +53,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)	+= spi-pxa2xx-dma.o
+@@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.
- obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx.o
  obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
  obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
 +obj-$(CONFIG_SPI_RALINK)		+= spi-ralink.o
  obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
  spi-s3c24xx-hw-y			:= spi-s3c24xx.o
  spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
-diff --git a/drivers/spi/spi-ralink.c b/drivers/spi/spi-ralink.c
-new file mode 100644
-index 0000000..8d89cab
 --- /dev/null
 +++ b/drivers/spi/spi-ralink.c
 @@ -0,0 +1,472 @@
@@ -520,6 +513,3 @@ index 0000000..8d89cab
 +MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
 +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 +MODULE_LICENSE("GPL");
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0116-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch

@@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  drivers/tty/serial/of_serial.c |    5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)
 
-diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
-index b025d54..42f8550 100644
 --- a/drivers/tty/serial/of_serial.c
 +++ b/drivers/tty/serial/of_serial.c
-@@ -98,7 +98,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
+@@ -97,7 +97,10 @@ static int of_platform_serial_setup(stru
  		port->regshift = prop;
  
  	port->irq = irq_of_parse_and_map(np, 0);
@@ -27,6 +25,3 @@ index b025d54..42f8550 100644
  	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
  		switch (prop) {
  		case 1:
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0117-serial-ralink-adds-mt7620-serial.patch

@@ -10,11 +10,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  drivers/tty/serial/8250/Kconfig |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
-index 2ef9537..1038cdb 100644
 --- a/drivers/tty/serial/8250/Kconfig
 +++ b/drivers/tty/serial/8250/Kconfig
-@@ -279,7 +279,7 @@ config SERIAL_8250_EM
+@@ -280,7 +280,7 @@ config SERIAL_8250_EM
  
  config SERIAL_8250_RT288X
  	bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
@@ -23,6 +21,3 @@ index 2ef9537..1038cdb 100644
  	help
  	  If you have a Ralink RT288x/RT305x SoC based board and want to use the
  	  serial port, say Y to this option. The driver can handle up to 2 serial
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0118-PCI-MIPS-adds-rt2880-pci-support.patch

@@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 283 insertions(+)
  create mode 100644 arch/mips/pci/pci-rt2880.c
 
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 2cb1d31..77974ba 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1
  obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
@@ -25,9 +23,6 @@ index 2cb1d31..77974ba 100644
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
-new file mode 100644
-index 0000000..e2c4730
 --- /dev/null
 +++ b/arch/mips/pci/pci-rt2880.c
 @@ -0,0 +1,281 @@
@@ -312,8 +307,6 @@ index 0000000..e2c4730
 +}
 +
 +arch_initcall(pcibios_init);
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 8254502..a3eec2a 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -8,6 +8,7 @@ choice
@@ -324,6 +317,3 @@ index 8254502..a3eec2a 100644
  
  	config SOC_RT305X
  		bool "RT305x"
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0119-PCI-MIPS-adds-rt3883-pci-support.patch

@@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 489 insertions(+)
  create mode 100644 arch/mips/pci/pci-rt3883.c
 
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 77974ba..3cbfd9b 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
+@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
  obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
@@ -25,9 +23,6 @@ index 77974ba..3cbfd9b 100644
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
-new file mode 100644
-index 0000000..8a4c8ce
 --- /dev/null
 +++ b/arch/mips/pci/pci-rt3883.c
 @@ -0,0 +1,487 @@
@@ -518,8 +513,6 @@ index 0000000..8a4c8ce
 +
 +	return 0;
 +}
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index a3eec2a..2b7b70a 100644
 --- a/arch/mips/ralink/Kconfig
 +++ b/arch/mips/ralink/Kconfig
 @@ -20,6 +20,7 @@ choice
@@ -530,6 +523,3 @@ index a3eec2a..2b7b70a 100644
  
  	config SOC_MT7620
  		bool "MT7620"
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0120-NET-MIPS-add-ralink-SoC-ethernet-driver.patch

@@ -26,10 +26,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 drivers/net/ethernet/ramips/ramips_eth.h
  create mode 100644 drivers/net/ethernet/ramips/ramips_main.c
 
-Index: linux-3.8.3/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+--- /dev/null
-===================================================================
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h	2013-04-02 11:45:25.221274467 +0200
 @@ -0,0 +1,27 @@
 +/*
 + *  Ralink RT305x SoC platform device registration
@@ -58,11 +56,9 @@ Index: linux-3.8.3/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
 +};
 +
 +#endif /* _RT305X_ESW_PLATFORM_H */
-Index: linux-3.8.3/arch/mips/ralink/rt305x.c
+--- a/arch/mips/ralink/rt305x.c
-===================================================================
++++ b/arch/mips/ralink/rt305x.c
---- linux-3.8.3.orig/arch/mips/ralink/rt305x.c	2013-04-02 11:45:25.025274462 +0200
+@@ -182,6 +182,7 @@ void __init ralink_clk_init(void)
-+++ linux-3.8.3/arch/mips/ralink/rt305x.c	2013-04-02 11:45:25.221274467 +0200
-@@ -182,6 +182,7 @@
  	}
  
  	ralink_clk_add("cpu", cpu_rate);
@@ -70,11 +66,9 @@ Index: linux-3.8.3/arch/mips/ralink/rt305x.c
  	ralink_clk_add("10000b00.spi", sys_rate);
  	ralink_clk_add("10000100.timer", wdt_rate);
  	ralink_clk_add("10000120.watchdog", wdt_rate);
-Index: linux-3.8.3/drivers/net/ethernet/Kconfig
+--- a/drivers/net/ethernet/Kconfig
-===================================================================
++++ b/drivers/net/ethernet/Kconfig
---- linux-3.8.3.orig/drivers/net/ethernet/Kconfig	2013-03-14 19:27:14.000000000 +0100
+@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
-+++ linux-3.8.3/drivers/net/ethernet/Kconfig	2013-04-02 11:45:25.221274467 +0200
-@@ -136,6 +136,7 @@
  source "drivers/net/ethernet/pasemi/Kconfig"
  source "drivers/net/ethernet/qlogic/Kconfig"
  source "drivers/net/ethernet/racal/Kconfig"
@@ -82,11 +76,9 @@ Index: linux-3.8.3/drivers/net/ethernet/Kconfig
  source "drivers/net/ethernet/realtek/Kconfig"
  source "drivers/net/ethernet/renesas/Kconfig"
  source "drivers/net/ethernet/rdc/Kconfig"
-Index: linux-3.8.3/drivers/net/ethernet/Makefile
+--- a/drivers/net/ethernet/Makefile
-===================================================================
++++ b/drivers/net/ethernet/Makefile
---- linux-3.8.3.orig/drivers/net/ethernet/Makefile	2013-03-14 19:27:14.000000000 +0100
+@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
-+++ linux-3.8.3/drivers/net/ethernet/Makefile	2013-04-02 11:45:25.221274467 +0200
-@@ -54,6 +54,7 @@
  obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
  obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
  obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
@@ -94,10 +86,8 @@ Index: linux-3.8.3/drivers/net/ethernet/Makefile
  obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
  obj-$(CONFIG_SH_ETH) += renesas/
  obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-Index: linux-3.8.3/drivers/net/ethernet/ramips/Kconfig
+--- /dev/null
-===================================================================
++++ b/drivers/net/ethernet/ramips/Kconfig
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/drivers/net/ethernet/ramips/Kconfig	2013-04-02 11:45:25.221274467 +0200
 @@ -0,0 +1,18 @@
 +config NET_RAMIPS
 +       tristate "Ralink RT288X/RT3X5X/RT3662/RT3883 ethernet driver"
@@ -117,10 +107,8 @@ Index: linux-3.8.3/drivers/net/ethernet/ramips/Kconfig
 +	depends on DEBUG_FS
 +
 +endif
-Index: linux-3.8.3/drivers/net/ethernet/ramips/Makefile
+--- /dev/null
-===================================================================
++++ b/drivers/net/ethernet/ramips/Makefile
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/drivers/net/ethernet/ramips/Makefile	2013-04-02 11:45:25.221274467 +0200
 @@ -0,0 +1,9 @@
 +#
 +# Makefile for the Ramips SoCs built-in ethernet macs
@@ -131,10 +119,8 @@ Index: linux-3.8.3/drivers/net/ethernet/ramips/Makefile
 +ramips-$(CONFIG_NET_RAMIPS_DEBUG_FS)	+= ramips_debugfs.o
 +
 +obj-$(CONFIG_NET_RAMIPS)	+= ramips.o
-Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_debugfs.c
+--- /dev/null
-===================================================================
++++ b/drivers/net/ethernet/ramips/ramips_debugfs.c
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/drivers/net/ethernet/ramips/ramips_debugfs.c	2013-04-02 11:45:25.225274468 +0200
 @@ -0,0 +1,127 @@
 +/*
 + *  Ralink SoC ethernet driver debugfs code
@@ -263,10 +249,8 @@ Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_debugfs.c
 +	debugfs_remove(raeth_debugfs_root);
 +	raeth_debugfs_root = NULL;
 +}
-Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_esw.c
+--- /dev/null
-===================================================================
++++ b/drivers/net/ethernet/ramips/ramips_esw.c
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/drivers/net/ethernet/ramips/ramips_esw.c	2013-04-02 11:45:25.225274468 +0200
 @@ -0,0 +1,1220 @@
 +#include <linux/ioport.h>
 +#include <linux/switch.h>
@@ -1488,10 +1472,8 @@ Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_esw.c
 +{
 +	platform_driver_unregister(&rt305x_esw_driver);
 +}
-Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_eth.h
+--- /dev/null
-===================================================================
++++ b/drivers/net/ethernet/ramips/ramips_eth.h
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/drivers/net/ethernet/ramips/ramips_eth.h	2013-04-02 11:45:25.225274468 +0200
 @@ -0,0 +1,375 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
@@ -1868,10 +1850,8 @@ Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_eth.h
 +#endif /* CONFIG_NET_RAMIPS_DEBUG_FS */
 +
 +#endif /* RAMIPS_ETH_H */
-Index: linux-3.8.3/drivers/net/ethernet/ramips/ramips_main.c
+--- /dev/null
-===================================================================
++++ b/drivers/net/ethernet/ramips/ramips_main.c
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.3/drivers/net/ethernet/ramips/ramips_main.c	2013-04-02 12:07:58.749306720 +0200
 @@ -0,0 +1,1285 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify

target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch

@@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 359 insertions(+)
  create mode 100644 drivers/watchdog/ralink_wdt.c
 
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 9fcc70c..c4b508e 100644
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -1104,6 +1104,12 @@ config LANTIQ_WDT
+@@ -1077,6 +1077,12 @@ config LANTIQ_WDT
  	help
  	  Hardware driver for the Lantiq SoC Watchdog Timer.
  
@@ -30,11 +28,9 @@ index 9fcc70c..c4b508e 100644
  # PARISC Architecture
  
  # POWERPC Architecture
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index a300b94..3a8ad6a 100644
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -134,6 +134,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
  obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
  octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
  obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
@@ -42,9 +38,6 @@ index a300b94..3a8ad6a 100644
  
  # PARISC Architecture
  
-diff --git a/drivers/watchdog/ralink_wdt.c b/drivers/watchdog/ralink_wdt.c
-new file mode 100644
-index 0000000..8a8dc76
 --- /dev/null
 +++ b/drivers/watchdog/ralink_wdt.c
 @@ -0,0 +1,352 @@
@@ -400,6 +393,3 @@ index 0000000..8a8dc76
 +MODULE_LICENSE("GPL v2");
 +MODULE_ALIAS("platform:" DRIVER_NAME);
 +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch

@@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/kernel/prom.c      |   24 ++++++++++++++++++++++++
  3 files changed, 32 insertions(+), 1 deletion(-)
 
-diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
-index 8808bf5..a4ad354 100644
 --- a/arch/mips/include/asm/prom.h
 +++ b/arch/mips/include/asm/prom.h
-@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_param_header *bph);
+@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_
  	__dt_setup_arch(&__dtb_##sym##_begin);				\
  })
  
@@ -29,8 +27,6 @@ index 8808bf5..a4ad354 100644
  #endif /* CONFIG_OF */
  
  #endif /* __ASM_PROM_H */
-diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
-index 135c4aa..9ab3d13 100644
 --- a/arch/mips/kernel/proc.c
 +++ b/arch/mips/kernel/proc.c
 @@ -12,6 +12,7 @@
@@ -41,7 +37,7 @@ index 135c4aa..9ab3d13 100644
  #include <asm/mips_machine.h>
  
  unsigned int vced_count, vcei_count;
-@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
+@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file
  	 */
  	if (n == 0) {
  		seq_printf(m, "system type\t\t: %s\n", get_system_type());
@@ -53,8 +49,6 @@ index 135c4aa..9ab3d13 100644
  			seq_printf(m, "machine\t\t\t: %s\n",
  				   mips_get_machine_name());
  	}
-diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
-index 028f6f8..1aa68a2 100644
 --- a/arch/mips/kernel/prom.c
 +++ b/arch/mips/kernel/prom.c
 @@ -23,6 +23,13 @@
@@ -71,7 +65,7 @@ index 028f6f8..1aa68a2 100644
  int __init early_init_dt_scan_memory_arch(unsigned long node,
  					  const char *uname, int depth,
  					  void *data)
-@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
+@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_a
  }
  #endif
  
@@ -92,7 +86,7 @@ index 028f6f8..1aa68a2 100644
  void __init early_init_devtree(void *params)
  {
  	/* Setup flat device-tree pointer */
-@@ -65,6 +86,9 @@ void __init early_init_devtree(void *params)
+@@ -65,6 +86,9 @@ void __init early_init_devtree(void *par
  	/* Scan memory nodes */
  	of_scan_flat_dt(early_init_dt_scan_root, NULL);
  	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
@@ -102,6 +96,3 @@ index 028f6f8..1aa68a2 100644
  }
  
  void __init __dt_setup_arch(struct boot_param_header *bph)
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0201-owrt-OF-NET-add-of_get_mac_address_mtd.patch

@@ -14,8 +14,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  include/linux/of_net.h |    1 +
  2 files changed, 38 insertions(+)
 
-diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
-index ffab033..15f4a71 100644
 --- a/drivers/of/of_net.c
 +++ b/drivers/of/of_net.c
 @@ -10,6 +10,7 @@
@@ -26,7 +24,7 @@ index ffab033..15f4a71 100644
  
  /**
   * It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct device_node *np)
+@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct de
  	return NULL;
  }
  EXPORT_SYMBOL(of_get_mac_address);
@@ -66,8 +64,6 @@ index ffab033..15f4a71 100644
 +	return ret;
 +}
 +EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
-diff --git a/include/linux/of_net.h b/include/linux/of_net.h
-index f474641..9d3304f 100644
 --- a/include/linux/of_net.h
 +++ b/include/linux/of_net.h
 @@ -11,6 +11,7 @@
@@ -78,6 +74,3 @@ index f474641..9d3304f 100644
  #endif
  
  #endif /* __LINUX_OF_NET_H */
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0202-owrt-USB-adds-dwc_otg.patch

@@ -47,8 +47,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
  create mode 100644 drivers/usb/dwc_otg/linux/dwc_otg_plat.h
 
-diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
-index 640ae6c..20a629a 100644
 --- a/drivers/usb/Kconfig
 +++ b/drivers/usb/Kconfig
 @@ -126,6 +126,8 @@ source "drivers/usb/core/Kconfig"
@@ -60,8 +58,6 @@ index 640ae6c..20a629a 100644
  source "drivers/usb/mon/Kconfig"
  
  source "drivers/usb/wusbcore/Kconfig"
-diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
-index 8f5ebce..4bcfe6d 100644
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
 @@ -9,6 +9,7 @@ obj-$(CONFIG_USB)		+= core/
@@ -72,9 +68,6 @@ index 8f5ebce..4bcfe6d 100644
  
  obj-$(CONFIG_USB_MON)		+= mon/
  
-diff --git a/drivers/usb/dwc_otg/Kconfig b/drivers/usb/dwc_otg/Kconfig
-new file mode 100644
-index 0000000..6dd75f1
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/Kconfig
 @@ -0,0 +1,24 @@
@@ -102,9 +95,6 @@ index 0000000..6dd75f1
 +config DWC_OTG_DEBUG
 +	bool "Enable debug mode"
 +	depends on DWC_OTG
-diff --git a/drivers/usb/dwc_otg/Makefile b/drivers/usb/dwc_otg/Makefile
-new file mode 100644
-index 0000000..95c5b66
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/Makefile
 @@ -0,0 +1,25 @@
@@ -133,9 +123,6 @@ index 0000000..95c5b66
 +dwc_otg-objs	+= dwc_otg_cil.o dwc_otg_cil_intr.o
 +dwc_otg-objs	+= dwc_otg_pcd.o dwc_otg_pcd_intr.o
 +dwc_otg-objs	+= dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
-diff --git a/drivers/usb/dwc_otg/dummy_audio.c b/drivers/usb/dwc_otg/dummy_audio.c
-new file mode 100644
-index 0000000..225decf
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dummy_audio.c
 @@ -0,0 +1,1575 @@
@@ -1714,9 +1701,6 @@ index 0000000..225decf
 +	remove_proc_entry("isoc_test", NULL);
 +}
 +module_exit (cleanup);
-diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.c b/drivers/usb/dwc_otg/dwc_otg_attr.c
-new file mode 100644
-index 0000000..8543537
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
 @@ -0,0 +1,966 @@
@@ -2686,9 +2670,6 @@ index 0000000..8543537
 +	device_remove_file(dev, &dev_attr_rd_reg_test);
 +	device_remove_file(dev, &dev_attr_wr_reg_test);
 +}
-diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.h b/drivers/usb/dwc_otg/dwc_otg_attr.h
-new file mode 100644
-index 0000000..0862b27
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
 @@ -0,0 +1,67 @@
@@ -2759,9 +2740,6 @@ index 0000000..0862b27
 +void dwc_otg_attr_remove (struct device *dev);
 +
 +#endif
-diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.c b/drivers/usb/dwc_otg/dwc_otg_cil.c
-new file mode 100644
-index 0000000..89aa83e
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
 @@ -0,0 +1,3692 @@
@@ -6457,9 +6435,6 @@ index 0000000..89aa83e
 +}
 +
 +#endif //DWC_EN_ISOC
-diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.h b/drivers/usb/dwc_otg/dwc_otg_cil.h
-new file mode 100644
-index 0000000..9507992
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
 @@ -0,0 +1,1098 @@
@@ -7561,9 +7536,6 @@ index 0000000..9507992
 +
 +#endif
 +
-diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
-new file mode 100644
-index 0000000..61b17b3
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
 @@ -0,0 +1,750 @@
@@ -8317,9 +8289,6 @@ index 0000000..61b17b3
 +
 +        return retval;
 +}
-diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
-new file mode 100644
-index 0000000..63272d0
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
 @@ -0,0 +1,1273 @@
@@ -9596,9 +9565,6 @@ index 0000000..63272d0
 + </td></tr>
 +
 +*/
-diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.h b/drivers/usb/dwc_otg/dwc_otg_driver.h
-new file mode 100644
-index 0000000..fd7f0a4
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
 @@ -0,0 +1,83 @@
@@ -9685,9 +9651,6 @@ index 0000000..fd7f0a4
 +} dwc_otg_device_t;
 +
 +#endif
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.c b/drivers/usb/dwc_otg/dwc_otg_hcd.c
-new file mode 100644
-index 0000000..fe643b6
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
 @@ -0,0 +1,2852 @@
@@ -12543,9 +12506,6 @@ index 0000000..fe643b6
 +#endif
 +}
 +#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.h b/drivers/usb/dwc_otg/dwc_otg_hcd.h
-new file mode 100644
-index 0000000..ee41dc9
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
 @@ -0,0 +1,668 @@
@@ -13217,9 +13177,6 @@ index 0000000..ee41dc9
 +#endif
 +#endif
 +#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
-new file mode 100644
-index 0000000..bdf2db9
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
 @@ -0,0 +1,1873 @@
@@ -15096,9 +15053,6 @@ index 0000000..bdf2db9
 +}
 +
 +#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
-new file mode 100644
-index 0000000..cfb1f16
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
 @@ -0,0 +1,684 @@
@@ -15786,9 +15740,6 @@ index 0000000..cfb1f16
 +}
 +
 +#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.c b/drivers/usb/dwc_otg/dwc_otg_pcd.c
-new file mode 100644
-index 0000000..030a3f2
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c
 @@ -0,0 +1,2523 @@
@@ -18315,9 +18266,6 @@ index 0000000..030a3f2
 +EXPORT_SYMBOL(usb_gadget_unregister_driver);
 +
 +#endif /* DWC_HOST_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.h b/drivers/usb/dwc_otg/dwc_otg_pcd.h
-new file mode 100644
-index 0000000..48de957
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h
 @@ -0,0 +1,248 @@
@@ -18569,9 +18517,6 @@ index 0000000..48de957
 +
 +#endif
 +#endif /* DWC_HOST_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
-new file mode 100644
-index 0000000..fd44fd8
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
 @@ -0,0 +1,3654 @@
@@ -22229,9 +22174,6 @@ index 0000000..fd44fd8
 +}
 +
 +#endif /* DWC_HOST_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_regs.h b/drivers/usb/dwc_otg/dwc_otg_regs.h
-new file mode 100644
-index 0000000..8265766
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
 @@ -0,0 +1,2075 @@
@@ -24310,9 +24252,6 @@ index 0000000..8265766
 +
 +
 +#endif
-diff --git a/drivers/usb/dwc_otg/linux/dwc_otg_plat.h b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
-new file mode 100644
-index 0000000..618151b
 --- /dev/null
 +++ b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
 @@ -0,0 +1,260 @@
@@ -24576,6 +24515,3 @@ index 0000000..618151b
 +
 +#endif
 +
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0203-owrt-OF-USB-add-OF-binding-for-ehci-and-ohci-platfor.patch

@@ -12,11 +12,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  drivers/usb/host/ohci-platform.c |    7 +++++++
  2 files changed, 14 insertions(+)
 
-diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
-index ca75063..fdddce1 100644
 --- a/drivers/usb/host/ehci-platform.c
 +++ b/drivers/usb/host/ehci-platform.c
-@@ -183,6 +183,12 @@ static int ehci_platform_resume(struct device *dev)
+@@ -183,6 +183,12 @@ static int ehci_platform_resume(struct d
  #define ehci_platform_resume	NULL
  #endif /* CONFIG_PM */
  
@@ -29,7 +27,7 @@ index ca75063..fdddce1 100644
  static const struct platform_device_id ehci_platform_table[] = {
  	{ "ehci-platform", 0 },
  	{ }
-@@ -203,6 +209,7 @@ static struct platform_driver ehci_platform_driver = {
+@@ -203,6 +209,7 @@ static struct platform_driver ehci_platf
  		.owner	= THIS_MODULE,
  		.name	= "ehci-platform",
  		.pm	= &ehci_platform_pm_ops,
@@ -37,11 +35,9 @@ index ca75063..fdddce1 100644
  	}
  };
  
-diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
-index c3e7287..6d7d30b 100644
 --- a/drivers/usb/host/ohci-platform.c
 +++ b/drivers/usb/host/ohci-platform.c
-@@ -201,6 +201,12 @@ static int ohci_platform_resume(struct device *dev)
+@@ -200,6 +200,12 @@ static int ohci_platform_resume(struct d
  #define ohci_platform_resume	NULL
  #endif /* CONFIG_PM */
  
@@ -54,13 +50,10 @@ index c3e7287..6d7d30b 100644
  static const struct platform_device_id ohci_platform_table[] = {
  	{ "ohci-platform", 0 },
  	{ }
-@@ -221,5 +227,6 @@ static struct platform_driver ohci_platform_driver = {
+@@ -220,5 +226,6 @@ static struct platform_driver ohci_platf
  		.owner	= THIS_MODULE,
  		.name	= "ohci-platform",
  		.pm	= &ohci_platform_pm_ops,
 +		.of_match_table = ohci_match_table,
  	}
  };
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch

@@ -19,8 +19,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 arch/mips/ralink/rt305x-usb.c
  create mode 100644 arch/mips/ralink/rt3883-usb.c
 
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index cae7d88..8572538 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -9,8 +9,8 @@
@@ -34,19 +32,15 @@ index cae7d88..8572538 100644
  obj-$(CONFIG_SOC_MT7620) += mt7620.o
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
-index ed99f23..14a101c 100644
 --- a/arch/mips/ralink/common.h
 +++ b/arch/mips/ralink/common.h
-@@ -43,5 +43,6 @@ extern void prom_soc_init(struct ralink_soc_info *soc_info);
+@@ -43,5 +43,6 @@ extern void prom_soc_init(struct ralink_
  __iomem void *plat_of_remap_node(const char *node);
  
  void ralink_pinmux(void);
 +void ralink_usb_platform(void);
  
  #endif /* _RALINK_COMMON_H__ */
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 9d0dc8b..19b28c5 100644
 --- a/arch/mips/ralink/mt7620.c
 +++ b/arch/mips/ralink/mt7620.c
 @@ -146,6 +146,11 @@ struct ralink_pinmux rt_pinmux = {
@@ -61,8 +55,6 @@ index 9d0dc8b..19b28c5 100644
  void __init ralink_clk_init(void)
  {
  	unsigned long cpu_rate, sys_rate;
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index ecf1482..f438145 100644
 --- a/arch/mips/ralink/of.c
 +++ b/arch/mips/ralink/of.c
 @@ -102,6 +102,7 @@ static int __init plat_of_setup(void)
@@ -73,9 +65,6 @@ index ecf1482..f438145 100644
  
  	return 0;
  }
-diff --git a/arch/mips/ralink/rt305x-usb.c b/arch/mips/ralink/rt305x-usb.c
-new file mode 100644
-index 0000000..793fc82
 --- /dev/null
 +++ b/arch/mips/ralink/rt305x-usb.c
 @@ -0,0 +1,120 @@
@@ -199,9 +188,6 @@ index 0000000..793fc82
 +				&rt3352_ehci_data, &rt3352_ehci_dmamask);
 +	}
 +}
-diff --git a/arch/mips/ralink/rt3883-usb.c b/arch/mips/ralink/rt3883-usb.c
-new file mode 100644
-index 0000000..1d948a9
 --- /dev/null
 +++ b/arch/mips/ralink/rt3883-usb.c
 @@ -0,0 +1,118 @@
@@ -323,6 +309,3 @@ index 0000000..1d948a9
 +	ralink_add_usb("ehci-platform",
 +			&rt3883_ehci_data, &rt3883_ehci_dmamask);
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0205-owrt-MIPS-add-OWRTDTB-secion.patch

@@ -10,13 +10,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/of.c     |    4 +++-
  3 files changed, 7 insertions(+), 2 deletions(-)
 
-diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
-index c61cdae..b4e55bb 100644
 --- a/arch/mips/kernel/head.S
 +++ b/arch/mips/kernel/head.S
-@@ -140,6 +140,9 @@ FEXPORT(__kernel_entry)
+@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
- 	j	kernel_entry
+ 	.fill	0x400
- #endif
+ #endif /* CONFIG_IMAGE_CMDLINE_HACK */
  
 +	.ascii  "OWRTDTB:"
 +	EXPORT(__image_dtb)
@@ -24,8 +22,6 @@ index c61cdae..b4e55bb 100644
  	__REF
  
  NESTED(kernel_entry, 16, sp)			# kernel entry point
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 8572538..9e58aa1 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -15,4 +15,4 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
@@ -34,8 +30,6 @@ index 8572538..9e58aa1 100644
  
 -obj-y += dts/
 +#obj-y += dts/
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index f438145..ee998b7 100644
 --- a/arch/mips/ralink/of.c
 +++ b/arch/mips/ralink/of.c
 @@ -76,6 +76,8 @@ void __init device_tree_init(void)
@@ -56,6 +50,3 @@ index f438145..ee998b7 100644
  }
  
  static int __init plat_of_setup(void)
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0206-owrt-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on.patch

@@ -9,8 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  arch/mips/ralink/timer.c |  213 ++++++++++++++++++++++++++++++++++++++++++----
  1 file changed, 197 insertions(+), 16 deletions(-)
 
-diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
-index 9a943e8..33b2a04 100644
 --- a/arch/mips/ralink/timer.c
 +++ b/arch/mips/ralink/timer.c
 @@ -12,6 +12,8 @@
@@ -63,7 +61,7 @@ index 9a943e8..33b2a04 100644
  };
  
  static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
-@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt
  static irqreturn_t rt_timer_irq(int irq, void *_rt)
  {
  	struct rt_timer *rt =  (struct rt_timer *) _rt;
@@ -114,7 +112,7 @@ index 9a943e8..33b2a04 100644
  	if (err) {
  		dev_err(rt->dev, "failed to request irq\n");
  	} else {
-@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_tim
  	else
  		rt->timer_div = divisor;
  
@@ -123,7 +121,7 @@ index 9a943e8..33b2a04 100644
  	return 0;
  }
  
-@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_timer *rt)
+@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_t
  	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
  }
  
@@ -252,7 +250,7 @@ index 9a943e8..33b2a04 100644
  
  	if (!res) {
  		dev_err(&pdev->dev, "no memory resource found\n");
-@@ -147,12 +310,29 @@ static int rt_timer_probe(struct platform_device *pdev)
+@@ -147,12 +310,29 @@ static int rt_timer_probe(struct platfor
  	if (!rt->timer_freq)
  		return -EINVAL;
  
@@ -285,7 +283,7 @@ index 9a943e8..33b2a04 100644
  
  	dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
  
-@@ -163,6 +343,7 @@ static int rt_timer_remove(struct platform_device *pdev)
+@@ -163,6 +343,7 @@ static int rt_timer_remove(struct platfo
  {
  	struct rt_timer *rt = platform_get_drvdata(pdev);
  
@@ -293,7 +291,7 @@ index 9a943e8..33b2a04 100644
  	rt_timer_disable(rt);
  	rt_timer_free(rt);
  
-@@ -187,6 +368,6 @@ static struct platform_driver rt_timer_driver = {
+@@ -187,6 +368,6 @@ static struct platform_driver rt_timer_d
  
  module_platform_driver(rt_timer_driver);
  
@@ -301,6 +299,3 @@ index 9a943e8..33b2a04 100644
 +MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
  MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
  MODULE_LICENSE("GPL");
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0207-owrt-MIPS-ralink-add-support-for-runtime-memory-dete.patch

@@ -17,8 +17,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  4 files changed, 126 insertions(+), 1 deletion(-)
  create mode 100644 arch/mips/ralink/memory.c
 
-diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
-index a4ad354..91e83e3 100644
 --- a/arch/mips/include/asm/prom.h
 +++ b/arch/mips/include/asm/prom.h
 @@ -20,6 +20,9 @@
@@ -31,11 +29,9 @@ index a4ad354..91e83e3 100644
  extern void device_tree_init(void);
  
  static inline unsigned long pci_address_to_pio(phys_addr_t address)
-diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
-index 1aa68a2..feac917 100644
 --- a/arch/mips/kernel/prom.c
 +++ b/arch/mips/kernel/prom.c
-@@ -88,6 +88,9 @@ void __init early_init_devtree(void *params)
+@@ -88,6 +88,9 @@ void __init early_init_devtree(void *par
  	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
  
  	/* try to load the mips machine name */
@@ -45,8 +41,6 @@ index 1aa68a2..feac917 100644
  	of_scan_flat_dt(early_init_dt_scan_model, NULL);
  }
  
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 9e58aa1..800f98b 100644
 --- a/arch/mips/ralink/Makefile
 +++ b/arch/mips/ralink/Makefile
 @@ -6,7 +6,7 @@
@@ -58,9 +52,6 @@ index 9e58aa1..800f98b 100644
  
  obj-$(CONFIG_SOC_RT288X) += rt288x.o
  obj-$(CONFIG_SOC_RT305X) += rt305x.o rt305x-usb.o
-diff --git a/arch/mips/ralink/memory.c b/arch/mips/ralink/memory.c
-new file mode 100644
-index 0000000..54da31d
 --- /dev/null
 +++ b/arch/mips/ralink/memory.c
 @@ -0,0 +1,119 @@
@@ -183,6 +174,3 @@ index 0000000..54da31d
 +
 +	return 0;
 +}
--- 
-1.7.10.4
-

target/linux/ramips/patches-3.8/0208-owrt-mtd-split.patch

@@ -10,11 +10,9 @@ Subject: [PATCH 19/25] owrt mtd split
  drivers/mtd/mtdpart.c                              |  173 +++++++++++++++++++-
  4 files changed, 184 insertions(+), 1 deletions(-)
 
-Index: linux-3.9-rc4/drivers/mtd/Kconfig
+--- a/drivers/mtd/Kconfig
-===================================================================
++++ b/drivers/mtd/Kconfig
---- linux-3.9-rc4.orig/drivers/mtd/Kconfig	2013-03-27 09:26:32.005789709 +0100
+@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
-+++ linux-3.9-rc4/drivers/mtd/Kconfig	2013-03-27 09:26:35.669789796 +0100
-@@ -31,6 +31,10 @@
  	bool "Automatically split 'rootfs' partition for squashfs"
  	default y
  
@@ -25,11 +23,9 @@ Index: linux-3.9-rc4/drivers/mtd/Kconfig
  config MTD_REDBOOT_PARTS
  	tristate "RedBoot partition table parsing"
  	---help---
-Index: linux-3.9-rc4/drivers/mtd/mtdpart.c
+--- a/drivers/mtd/mtdpart.c
-===================================================================
++++ b/drivers/mtd/mtdpart.c
---- linux-3.9-rc4.orig/drivers/mtd/mtdpart.c	2013-03-27 09:26:32.281789715 +0100
+@@ -844,6 +844,99 @@ static int refresh_rootfs_split(struct m
-+++ linux-3.9-rc4/drivers/mtd/mtdpart.c	2013-03-27 17:20:12.874466937 +0100
-@@ -844,6 +844,99 @@
  }
  #endif /* CONFIG_MTD_ROOTFS_SPLIT */
  
@@ -129,7 +125,7 @@ Index: linux-3.9-rc4/drivers/mtd/mtdpart.c
  /*
   * This function, given a master MTD object and a partition table, creates
   * and registers slave MTD objects which are bound to the master according to
-@@ -860,7 +953,7 @@
+@@ -860,7 +953,7 @@ int add_mtd_partitions(struct mtd_info *
  	struct mtd_part *slave;
  	uint64_t cur_offset = 0;
  	int i;
@@ -138,7 +134,7 @@ Index: linux-3.9-rc4/drivers/mtd/mtdpart.c
  	int ret;
  #endif
  
-@@ -877,6 +970,14 @@
+@@ -877,6 +970,14 @@ int add_mtd_partitions(struct mtd_info *
  
  		add_mtd_device(&slave->mtd);
  

target/linux/ramips/patches-3.8/0209-owrt-GPIO-add-gpio_export_with_name.patch

@@ -14,11 +14,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  include/linux/gpio.h                            |   23 ++++++++-
  5 files changed, 160 insertions(+), 8 deletions(-)
 
-Index: linux-3.8.3/Documentation/devicetree/bindings/gpio/gpio.txt
+--- a/Documentation/devicetree/bindings/gpio/gpio.txt
-===================================================================
++++ b/Documentation/devicetree/bindings/gpio/gpio.txt
---- linux-3.8.3.orig/Documentation/devicetree/bindings/gpio/gpio.txt	2013-03-14 19:27:14.000000000 +0100
+@@ -112,3 +112,63 @@ where,
-+++ linux-3.8.3/Documentation/devicetree/bindings/gpio/gpio.txt	2013-04-01 11:11:42.151167467 +0200
-@@ -112,3 +112,63 @@
  
  The pinctrl node must have "#gpio-range-cells" property to show number of
  arguments to pass with phandle from gpio controllers node.
@@ -82,10 +80,8 @@ Index: linux-3.8.3/Documentation/devicetree/bindings/gpio/gpio.txt
 +		gpio-export,output = <1>;
 +	};
 +};
-Index: linux-3.8.3/drivers/gpio/gpiolib-of.c
+--- a/drivers/gpio/gpiolib-of.c
-===================================================================
++++ b/drivers/gpio/gpiolib-of.c
---- linux-3.8.3.orig/drivers/gpio/gpiolib-of.c	2013-03-14 19:27:14.000000000 +0100
-+++ linux-3.8.3/drivers/gpio/gpiolib-of.c	2013-04-01 11:11:42.151167467 +0200
 @@ -21,6 +21,8 @@
  #include <linux/of_gpio.h>
  #include <linux/pinctrl/pinctrl.h>
@@ -95,7 +91,7 @@ Index: linux-3.8.3/drivers/gpio/gpiolib-of.c
  
  /* Private data structure for of_gpiochip_find_and_xlate */
  struct gg_data {
-@@ -289,3 +291,62 @@
+@@ -289,3 +291,62 @@ void of_gpiochip_remove(struct gpio_chip
  	if (chip->of_node)
  		of_node_put(chip->of_node);
  }
@@ -158,11 +154,9 @@ Index: linux-3.8.3/drivers/gpio/gpiolib-of.c
 +	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
 +}
 +device_initcall(of_gpio_export_init);
-Index: linux-3.8.3/drivers/gpio/gpiolib.c
+--- a/drivers/gpio/gpiolib.c
-===================================================================
++++ b/drivers/gpio/gpiolib.c
---- linux-3.8.3.orig/drivers/gpio/gpiolib.c	2013-03-14 19:27:14.000000000 +0100
+@@ -714,9 +714,10 @@ static struct class gpio_class = {
-+++ linux-3.8.3/drivers/gpio/gpiolib.c	2013-04-01 11:12:29.263168590 +0200
-@@ -714,9 +714,10 @@
  
  
  /**
@@ -174,7 +168,7 @@ Index: linux-3.8.3/drivers/gpio/gpiolib.c
   * Context: arch_initcall or later
   *
   * When drivers want to make a GPIO accessible to userspace after they
-@@ -728,7 +729,7 @@
+@@ -728,7 +729,7 @@ static struct class gpio_class = {
   *
   * Returns zero on success, else an error.
   */
@@ -183,7 +177,7 @@ Index: linux-3.8.3/drivers/gpio/gpiolib.c
  {
  	unsigned long		flags;
  	struct gpio_desc	*desc;
-@@ -762,6 +763,8 @@
+@@ -762,6 +763,8 @@ int gpio_export(unsigned gpio, bool dire
  		goto fail_unlock;
  	}
  
@@ -192,7 +186,7 @@ Index: linux-3.8.3/drivers/gpio/gpiolib.c
  	if (!desc->chip->direction_input || !desc->chip->direction_output)
  		direction_may_change = false;
  	spin_unlock_irqrestore(&gpio_lock, flags);
-@@ -804,7 +807,7 @@
+@@ -804,7 +807,7 @@ fail_unlock:
  	pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
  	return status;
  }
@@ -201,11 +195,9 @@ Index: linux-3.8.3/drivers/gpio/gpiolib.c
  
  static int match_export(struct device *dev, void *data)
  {
-Index: linux-3.8.3/include/asm-generic/gpio.h
+--- a/include/asm-generic/gpio.h
-===================================================================
++++ b/include/asm-generic/gpio.h
---- linux-3.8.3.orig/include/asm-generic/gpio.h	2013-03-14 19:27:14.000000000 +0100
+@@ -204,7 +204,8 @@ void devm_gpio_free(struct device *dev,
-+++ linux-3.8.3/include/asm-generic/gpio.h	2013-04-01 11:11:42.155167467 +0200
-@@ -204,7 +204,8 @@
   * A sysfs interface can be exported by individual drivers if they want,
   * but more typically is configured entirely from userspace.
   */
@@ -215,7 +207,7 @@ Index: linux-3.8.3/include/asm-generic/gpio.h
  extern int gpio_export_link(struct device *dev, const char *name,
  			unsigned gpio);
  extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
-@@ -249,7 +250,8 @@
+@@ -249,7 +250,8 @@ struct device;
  
  /* sysfs support is only available with gpiolib, where it's optional */
  
@@ -225,11 +217,9 @@ Index: linux-3.8.3/include/asm-generic/gpio.h
  {
  	return -ENOSYS;
  }
-Index: linux-3.8.3/include/linux/gpio.h
+--- a/include/linux/gpio.h
-===================================================================
++++ b/include/linux/gpio.h
---- linux-3.8.3.orig/include/linux/gpio.h	2013-03-14 19:27:14.000000000 +0100
+@@ -189,7 +189,8 @@ static inline void gpio_set_value_cansle
-+++ linux-3.8.3/include/linux/gpio.h	2013-04-01 11:11:42.159167467 +0200
-@@ -189,7 +189,8 @@
  	WARN_ON(1);
  }
  
@@ -239,7 +229,7 @@ Index: linux-3.8.3/include/linux/gpio.h
  {
  	/* GPIO can never have been requested or set as {in,out}put */
  	WARN_ON(1);
-@@ -248,4 +249,24 @@
+@@ -248,4 +249,24 @@ gpiochip_remove_pin_ranges(struct gpio_c
  
  #endif /* ! CONFIG_GENERIC_GPIO */
  

target/linux/rb532/Makefile

@@ -11,7 +11,7 @@ BOARD:=rb532
 BOARDNAME:=Mikrotik RouterBoard 532
 FEATURES:=jffs2 pci targz broken
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532

target/linux/realview/Makefile

@@ -13,7 +13,7 @@ FEATURES:=fpu ramdisk
 CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 DEVICE_TYPE:=developerboard
 

target/linux/uml/Makefile

@@ -23,7 +23,7 @@ BOARDNAME:=User Mode Linux
 FEATURES:=ext4 audio
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/xburst/Makefile

@@ -12,7 +12,7 @@ BOARDNAME:=Ingenic XBurst
 FEATURES:=jffs2 targz ubifs audio broken
 SUBTARGETS:=qi_lb60 n516 n526 id800wt
 
-LINUX_VERSION:=3.8.3
+LINUX_VERSION:=3.8.6
 
 DEVICE_TYPE=other