mirror of https://github.com/hak5/openwrt-owl.git
ramips: add support for ALFA Network AWUSFREE1
ALFA Network AWUSFREE1 is an USB Wi-Fi N300 adapter based on MT7628. Specification: - MT7628AN (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (MT7628) with external FEM (RFFM4203) - 2x detachable antennas (RP-SMA) - ASIX AX88772 USB to Ethernet bridge (connected with MT7628 PHY0) - 4x LED (2 driven by GPIO) - 1x button (reset) - 1x mini USB for host and main power input - UART header on PCB Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot: 1. Power device with reset button pressed and release it after ~5 sec. 2. Setup static IP 192.168.1.2/4 on your PC. 3. Go to 192.168.1.1 in browser and upload "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>openwrt-18.06
Piotr Dymacz
parent
8c64824576
commit
f1c193c27e
|
|
@ -60,6 +60,9 @@ alfa-network,ac1200rm)
|
|||
set_wifi_led "$boardname:green:wlan2g" "wlan1"
|
||||
ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
|
||||
;;
|
||||
alfa-network,awusfree1)
|
||||
set_wifi_led "$boardname:blue:wlan"
|
||||
;;
|
||||
all0256n-4M|\
|
||||
all0256n-8M)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
|
|
|
|||
|
|
@ -126,6 +126,27 @@ ramips_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
alfa-network,awusfree1|\
|
||||
cs-qr10|\
|
||||
d105|\
|
||||
dlink,dap-1522-a1|\
|
||||
dch-m225|\
|
||||
ex2700|\
|
||||
ex3700|\
|
||||
hpm|\
|
||||
mzk-ex300np|\
|
||||
mzk-ex750np|\
|
||||
na930|\
|
||||
pbr-d1|\
|
||||
tama,w06|\
|
||||
u25awf-h1|\
|
||||
wli-tx4-ag300n|\
|
||||
wmdr-143n|\
|
||||
wmr-300|\
|
||||
wn3000rpv3|\
|
||||
wrh-300cr)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
mir3g)
|
||||
ucidef_add_switch "switch0" \
|
||||
"2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
|
||||
|
|
@ -237,26 +258,6 @@ ramips_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
|
||||
;;
|
||||
cs-qr10|\
|
||||
d105|\
|
||||
dlink,dap-1522-a1|\
|
||||
dch-m225|\
|
||||
ex2700|\
|
||||
ex3700|\
|
||||
hpm|\
|
||||
mzk-ex300np|\
|
||||
mzk-ex750np|\
|
||||
na930|\
|
||||
pbr-d1|\
|
||||
tama,w06|\
|
||||
u25awf-h1|\
|
||||
wli-tx4-ag300n|\
|
||||
wmdr-143n|\
|
||||
wmr-300|\
|
||||
wn3000rpv3|\
|
||||
wrh-300cr)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
duzun-dm06)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "0:wan" "6@eth0"
|
||||
|
|
|
|||
|
|
@ -78,6 +78,9 @@ get_status_led() {
|
|||
wrh-300cr)
|
||||
status_led="$boardname:green:wps"
|
||||
;;
|
||||
alfa-network,awusfree1)
|
||||
status_led="$boardname:orange:system"
|
||||
;;
|
||||
all0239-3g|\
|
||||
dcs-930|\
|
||||
dir-300-b1|\
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@ platform_check_image() {
|
|||
ai-br100|\
|
||||
air3gii|\
|
||||
alfa-network,ac1200rm|\
|
||||
alfa-network,awusfree1|\
|
||||
all0239-3g|\
|
||||
all0256n-4M|\
|
||||
all0256n-8M|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,164 @@
|
|||
/*
|
||||
* BSD LICENSE
|
||||
*
|
||||
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the names of the copyright holders nor the names of any
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
|
||||
model = "ALFA Network AWUSFREE1";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system {
|
||||
label = "awusfree1:orange:system";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "awusfree1:blue:wlan";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portdisable = <0x1e>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x2e>;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "p0led_an", "wdt", "wled_an";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
|
||||
ext_lna {
|
||||
ralink,group = "uart1";
|
||||
ralink,function = "sw_r";
|
||||
};
|
||||
|
||||
ext_pa {
|
||||
ralink,group = "i2s";
|
||||
ralink,function = "antenna";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x1000>;
|
||||
};
|
||||
|
||||
partition@031000 {
|
||||
label = "config";
|
||||
reg = <0x31000 0xf000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
|
|
@ -19,6 +19,15 @@ endef
|
|||
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
|
||||
|
||||
|
||||
define Device/alfa-network_awusfree1
|
||||
DTS := AWUSFREE1
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
||||
DEVICE_TITLE := ALFA Network AWUSFREE1
|
||||
DEVICE_PACKAGES := uboot-envtools
|
||||
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
||||
endef
|
||||
TARGET_DEVICES += alfa-network_awusfree1
|
||||
|
||||
define Device/tama_w06
|
||||
DTS := W06
|
||||
IMAGE_SIZE := 15040k
|
||||
|
|
|
|||
Loading…
Reference in New Issue