* upgrade ixp4xx to 2.6.23.12 * upgrade to the new ethernet driver (temporary breaks Marvell switch support on Compex units) * handle NPE microcodes in a user friendly way - YAY for Intel for changing the license * add support for the Lanready AP1000 (used in for example the Ligowave LGO2AGN)

SVN-Revision: 10016
2007-12-28 21:00:01 +00:00 · 2007-12-28 21:00:01 +00:00 · efadab3747
parent 91c42459f5
commit efadab3747
47 changed files with 8289 additions and 81 deletions
--- a/package/ixp4xx-microcode/Makefile
+++ b/package/ixp4xx-microcode/Makefile
@ -0,0 +1,57 @@
+# 
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ixp4xx-microcode
+PKG_VERSION:=2.4
+PKG_RELEASE:=1
+
+PKG_SOURCE:=IPL_ixp400NpeLibrary-2_4.zip
+PKG_SOURCE_URL:=http://downloadmirror.intel.com/12954/eng/
+PKG_MD5SUM:=9a6dc3846041b899edf9eff8a906fb11
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ixp4xx-microcode
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Microcode for the IXP4xx network engines
+  DEPENDS:=@TARGET_ixp4xx
+endef
+
+define Package/ixp4xx-microcode/description
+ This package contains the microcode needed to use the network engines in IXP4xx CPUs
+endef
+
+define Build/Prepare
+	rm -rf $(PKG_BUILD_DIR)
+	mkdir -p $(PKG_BUILD_DIR)
+	unzip -d $(PKG_BUILD_DIR)/ $(DL_DIR)/$(PKG_SOURCE)
+	mv $(PKG_BUILD_DIR)/ixp400_xscale_sw/src/npeDl/IxNpeMicrocode.c $(PKG_BUILD_DIR)/
+	rm -rf $(PKG_BUILD_DIR)/ixp400_xscale_sw
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+	(cd $(PKG_BUILD_DIR); \
+		$(HOSTCC) -Wall IxNpeMicrocode.c -o IxNpeMicrocode; \
+		./IxNpeMicrocode -be \
+	)
+endef
+
+define Package/ixp4xx-microcode/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DIR) $(1)/usr/share/doc
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-B $(1)/lib/firmware/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-C $(1)/lib/firmware/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/LICENSE.IPL $(1)/usr/share/doc/
+endef
+
+$(eval $(call BuildPackage,ixp4xx-microcode))
--- a/target/linux/ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h
+++ b/target/linux/ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h
--- a/package/ixp4xx-microcode/src/LICENSE.IPL
+++ b/package/ixp4xx-microcode/src/LICENSE.IPL
@ -0,0 +1,27 @@
+INTEL(R) SOFTWARE LICENSE AGREEMENT
+ 
+Copyright (c) 2007, Intel Corporation.
+All rights reserved.
+
+Redistribution. Redistribution and use in binary form, without modification, are permitted
+provided that the following conditions are met:
+o Redistributions must reproduce the above copyright notice and the following disclaimer in the
+documentation and/or other materials provided with the distribution. 
+o Neither the name of Intel Corporation nor the names of its suppliers may be used to endorse
+or promote products derived from this software without specific prior written permission. 
+o No reverse engineering, decompilation, or disassembly of this software is permitted.
+
+Limited patent license. Intel Corporation grants a world-wide, royalty-free, non-exclusive
+license under patents it now or hereafter owns or controls to make, have made, use, import,
+offer to sell and sell (.Utilize.) this software, but solely to the extent that any such patent is
+necessary to Utilize the software alone. The patent license shall not apply to any combinations
+which include this software. No hardware per se is licensed hereunder.
+DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+OF SUCH DAMAGE.
--- a/scripts/arm-magic.sh
+++ b/scripts/arm-magic.sh
@ -22,7 +22,7 @@
 # NOTE: for now it's for only IXP4xx in big endian mode

 # list of supported boards, in "boardname machtypeid" format
-for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849" "dsmg600 964" "fsg3 1091"
+for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849" "dsmg600 964" "fsg3 1091" "ap1000 1543"
 do
  set -- $board
  hexid=$(printf %x\\n $2)
--- a/target/linux/ixp4xx/Makefile
+++ b/target/linux/ixp4xx/Makefile
@ -12,8 +12,10 @@ BOARDNAME:=Intel XScale IXP4xx
 FEATURES:=squashfs
 SUBTARGETS=generic harddisk

-LINUX_VERSION:=2.6.21.7
+LINUX_VERSION:=2.6.23.12

 include $(INCLUDE_DIR)/target.mk

+DEFAULT_PACKAGES += ixp4xx-microcode
+
 $(eval $(call BuildTarget))
--- a/target/linux/ixp4xx/config-default
+++ b/target/linux/ixp4xx/config-default
@ -28,6 +28,7 @@ CONFIG_ARCH_IXP4XX=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_OMAP is not set
@ -182,11 +183,13 @@ CONFIG_IP_NF_TARGET_REDIRECT=m
 # CONFIG_IP_NF_TFTP is not set
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
+CONFIG_IXP4XX_ETH=y
+# CONFIG_IXP4XX_HSS is not set
 # CONFIG_IXP4XX_INDIRECT_PCI is not set
 CONFIG_IXP4XX_MAC=y
 CONFIG_IXP4XX_NPE=y
 CONFIG_IXP4XX_NPE_FW_LOAD=y
-CONFIG_IXP4XX_NPE_FW_MTD=y
+CONFIG_IXP4XX_FW_LOAD=y
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_CRYPTO=y
 CONFIG_IXP4XX_WATCHDOG=y
@ -199,6 +202,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_LIBCRC32C is not set
 # CONFIG_LLC2 is not set
+CONFIG_MACH_AP1000=y
 CONFIG_MACH_AVILA=y
 CONFIG_MACH_COMPEX=y
 CONFIG_MACH_DSMG600=y
@ -212,6 +216,7 @@ CONFIG_MACH_LOFT=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_NSLU2=y
 CONFIG_MACH_PRONGHORNMETRO=y
+CONFIG_MACH_SIDEWINDER=y
 CONFIG_MACH_WG302V2=y
 CONFIG_MACH_WRT300NV2=y
 # CONFIG_MAC_PARTITION is not set
@ -345,13 +350,16 @@ CONFIG_RTC_CLASS=y
 # CONFIG_RTC_DEBUG is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
+CONFIG_RTC_DRV_DS1672=y
 # CONFIG_RTC_DRV_DS1742 is not set
 CONFIG_RTC_DRV_ISL1208=y
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_X1205=y
@ -456,6 +464,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_GTCO is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_UHCI_HCD=m
+# CONFIG_USER_NS is not set
 CONFIG_VECTORS_BASE=0xffff0000
 # CONFIG_VIA_RHINE is not set
 CONFIG_VIA_VELOCITY=m
--- a/target/linux/ixp4xx/image/Config.in
+++ b/target/linux/ixp4xx/image/Config.in
@ -1,9 +0,0 @@
-config IXP4XX_INCLUDE_UCODE
-	bool "Build images with Intel IXP4xx Microcode"
-	depends TARGET_ixp4xx
-	default y
-	help
-	  You must manually download IPL_ixp400NpeLibrary-2_4.zip from
-	  http://www.intel.com/design/network/products/npfamily/ixp400_archives.htm
-	  and put it in the dl/ directory of the build system.
-	  You will need to agree to the Intel Public License to do so - please do read it!
--- a/target/linux/ixp4xx/image/Makefile
+++ b/target/linux/ixp4xx/image/Makefile
@ -7,43 +7,28 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk

-UCODEFILE:=IPL_ixp400NpeLibrary-2_4.zip
-
-ifneq ($(CONFIG_IXP4XX_INCLUDE_UCODE),)
-  define Require/npe-ucode
-	[ -f $(DL_DIR)/$(UCODEFILE) ]
-  endef
-  define Build/Compile/npe
-	$(MAKE) -C npe-ucode \
-		BUILD_DIR="$(KDIR)" \
-		TARGET="$(KDIR)" \
-		compile
-  endef
-  define Image/Build/slug
+define Image/Build/slug
 	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
-		-L $(KDIR)/apex-nslu2-armeb.bin -m $(KDIR)/NPE-B \
+		-L $(KDIR)/apex-nslu2-armeb.bin \
 		-k $(BIN_DIR)/openwrt-nslu2-zImage \
 		-r rootfs:$(BIN_DIR)/openwrt-$(BOARD)-$(1).img \
 		-p -o $(BIN_DIR)/openwrt-nslu2-$(1).bin
 	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
-		-F -L $(KDIR)/apex-nslu2-armeb.bin -m $(KDIR)/NPE-B \
+		-F -L $(KDIR)/apex-nslu2-armeb.bin \
 		-k $(BIN_DIR)/openwrt-nslu2-zImage \
 		-r rootfs:$(BIN_DIR)/openwrt-$(BOARD)-$(1).img \
 		-p -o $(BIN_DIR)/openwrt-nslu2-$(1)-16mb.bin
-  endef
-endif
+endef

 define Build/Compile
 	$(MAKE) -C apex \
 		BUILD_DIR="$(KDIR)" \
 		TARGET="$(KDIR)" \
 		compile	
-	$(call Build/Compile/npe)
 endef

 define Build/Clean
 	$(MAKE) -C apex clean
-	$(MAKE) -C npe-ucode clean
 endef

 define Image/Prepare
@ -52,7 +37,6 @@ endef

 define Image/BuildKernel
 	cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
-#	$(shell BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh)
 	BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh
 endef

@ -76,10 +60,3 @@ define Image/Build/squashfs
 endef

 $(eval $(call BuildImage))
-
-$(eval $(call Require,npe-ucode, \
-	You must manually download $(UCODEFILE) from \\\
-	http://www.intel.com/design/network/products/npfamily/ixp400_archives.htm \\\
-	and put it in $(DL_DIR). \\\
-	You will need to agree to the Intel Public License to do so - please do read it! \
-))
--- a/target/linux/ixp4xx/image/npe-ucode/Makefile
+++ b/target/linux/ixp4xx/image/npe-ucode/Makefile
@ -1,41 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=npe-ucode
-PKG_VERSION:=2.4
-PKG_RELEASE:=2
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=IPL_ixp400NpeLibrary-2_4.zip
-
-include $(INCLUDE_DIR)/package.mk
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	unzip -d $(PKG_BUILD_DIR)/ $(DL_DIR)/$(PKG_SOURCE)
-	mv $(PKG_BUILD_DIR)/ixp400_xscale_sw/src/npeDl/IxNpeMicrocode.c $(PKG_BUILD_DIR)/
-	rm -rf $(PKG_BUILD_DIR)/ixp400_xscale_sw
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	(cd $(PKG_BUILD_DIR); \
-		$(HOSTCC) -Wall IxNpeMicrocode.c -o IxNpeMicrocode; \
-		./IxNpeMicrocode -be \
-	)
-endef
-
-define Build/InstallDev
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-B $(TARGET)/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-C $(TARGET)/
-endef
-
-$(eval $(call Build/DefaultTargets))
--- a/target/linux/ixp4xx/patches-2.6.23/001-kexec_atags.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/001-kexec_atags.patch
@ -0,0 +1,119 @@
+diff -uprN linux-2.6.23.orig/arch/arm/kernel/relocate_kernel.S linux-2.6.23/arch/arm/kernel/relocate_kernel.S
+--- linux-2.6.23.orig/arch/arm/kernel/relocate_kernel.S	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/kernel/relocate_kernel.S	2007-10-09 22:19:32.000000000 -0500
+@@ -7,6 +7,23 @@
+ 	.globl relocate_new_kernel
+ relocate_new_kernel:
+ 
+	/* Move boot params back to where the kernel expects them */
+
+	ldr	r0,kexec_boot_params_address
+	teq	r0,#0
+	beq	8f
+
+	ldr	r1,kexec_boot_params_copy
+	mov	r6,#KEXEC_BOOT_PARAMS_SIZE/4
+7:
+	ldr	r5,[r1],#4
+	str	r5,[r0],#4
+	subs	r6,r6,#1
+	bne	7b
+
+8:
+	/* Boot params moved, now go on with the kernel */
+
+ 	ldr	r0,kexec_indirection_page
+ 	ldr	r1,kexec_start_address
+ 
+@@ -50,7 +67,7 @@ relocate_new_kernel:
+ 	mov lr,r1
+ 	mov r0,#0
+ 	ldr r1,kexec_mach_type
+-	mov r2,#0
+	ldr r2,kexec_boot_params_address
+ 	mov pc,lr
+ 
+ 	.globl kexec_start_address
+@@ -65,6 +82,16 @@ kexec_indirection_page:
+ kexec_mach_type:
+ 	.long	0x0
+ 
+	/* phy addr where new kernel will expect to find boot params */
+	.globl kexec_boot_params_address
+kexec_boot_params_address:
+	.long	0x0
+
+	/* phy addr where old kernel put a copy of orig boot params */
+	.globl kexec_boot_params_copy
+kexec_boot_params_copy:
+	.long	0x0
+
+ relocate_new_kernel_end:
+ 
+ 	.globl relocate_new_kernel_size
+diff -uprN linux-2.6.23.orig/arch/arm/kernel/setup.c linux-2.6.23/arch/arm/kernel/setup.c
+--- linux-2.6.23.orig/arch/arm/kernel/setup.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/kernel/setup.c	2007-10-09 20:06:10.000000000 -0500
+@@ -24,6 +24,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/smp.h>
+ #include <linux/fs.h>
+#include <linux/kexec.h>
+ 
+ #include <asm/cpu.h>
+ #include <asm/elf.h>
+@@ -770,6 +771,23 @@ static int __init customize_machine(void
+ }
+ arch_initcall(customize_machine);
+ 
+#ifdef CONFIG_KEXEC
+
+/* Physical addr of where the boot params should be for this machine */
+extern unsigned long kexec_boot_params_address;
+
+/* Physical addr of the buffer into which the boot params are copied */
+extern unsigned long kexec_boot_params_copy;
+
+/* Pointer to the boot params buffer, for manipulation and display */
+unsigned long kexec_boot_params;
+EXPORT_SYMBOL(kexec_boot_params);
+
+/* The buffer itself - make sure it is sized correctly */
+static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4];
+
+#endif
+
+ void __init setup_arch(char **cmdline_p)
+ {
+ 	struct tag *tags = (struct tag *)&init_tags;
+@@ -788,6 +806,18 @@ void __init setup_arch(char **cmdline_p)
+ 	else if (mdesc->boot_params)
+ 		tags = phys_to_virt(mdesc->boot_params);
+ 
+#ifdef CONFIG_KEXEC
+	kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf);
+	kexec_boot_params = (unsigned long)kexec_boot_params_buf;
+	if (__atags_pointer) {
+		kexec_boot_params_address = __atags_pointer;
+		memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
+	} else if (mdesc->boot_params) {
+		kexec_boot_params_address = mdesc->boot_params;
+		memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
+	}
+#endif
+
+ 	/*
+ 	 * If we have the old style parameters, convert them to
+ 	 * a tag list.
+diff -uprN linux-2.6.23.orig/include/asm-arm/kexec.h linux-2.6.23/include/asm-arm/kexec.h
+--- linux-2.6.23.orig/include/asm-arm/kexec.h	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/include/asm-arm/kexec.h	2007-10-09 22:19:32.000000000 -0500
+@@ -14,6 +14,8 @@
+ 
+ #define KEXEC_ARCH KEXEC_ARCH_ARM
+ 
+#define KEXEC_BOOT_PARAMS_SIZE 1536
+
+ #ifndef __ASSEMBLY__
+ 
+ struct kimage;
--- a/target/linux/ixp4xx/patches-2.6.23/012-velocity_BE.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/012-velocity_BE.patch
@ -0,0 +1,926 @@
+diff -uprN linux-2.6.23.orig/drivers/net/via-velocity.c linux-2.6.23/drivers/net/via-velocity.c
+--- linux-2.6.23.orig/drivers/net/via-velocity.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/drivers/net/via-velocity.c	2007-10-11 00:53:45.000000000 -0500
+@@ -96,11 +96,31 @@ MODULE_AUTHOR("VIA Networking Technologi
+ MODULE_LICENSE("GPL");
+ MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
+ 
+/* Valid values for vdebug (additive, this is a bitmask):
+ *  0x00 => off
+ *  0x01 => always on
+ *  0x02 => additional detail on tx (rx, too, if anyone implements same)
+ *  0x04 => detail the initialization process
+ *  0x08 => spot debug detail; to be used as developers see fit
+ */
+static int vdebug = 0;
+
+/* HAIL - these macros are for the normal 0x01-type tracing... */
+#define HAIL(S) \
+	if (vdebug&1) printk(KERN_NOTICE "%s\n", (S));
+#define HAILS(S,T) \
+	if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T));
+
+ #define VELOCITY_PARAM(N,D) \
+         static int N[MAX_UNITS]=OPTION_DEFAULT;\
+ 	module_param_array(N, int, NULL, 0); \
+         MODULE_PARM_DESC(N, D);
+ 
+#define VELO_DEBUG_MIN   0
+#define VELO_DEBUG_MAX   255
+#define VELO_DEBUG_DEF   0
+VELOCITY_PARAM(velo_debug, "Debug level");
+
+ #define RX_DESC_MIN     64
+ #define RX_DESC_MAX     255
+ #define RX_DESC_DEF     64
+@@ -385,12 +405,12 @@ static void __devinit velocity_set_int_o
+ 	if (val == -1)
+ 		*opt = def;
+ 	else if (val < min || val > max) {
+-		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+-					devname, name, min, max);
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+					name, min, max);
+ 		*opt = def;
+ 	} else {
+-		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
+-					devname, name, val);
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "via-velocity: set value of parameter %s to %d\n",
+					name, val);
+ 		*opt = val;
+ 	}
+ }
+@@ -415,12 +435,12 @@ static void __devinit velocity_set_bool_
+ 	if (val == -1)
+ 		*opt |= (def ? flag : 0);
+ 	else if (val < 0 || val > 1) {
+-		printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
+-			devname, name);
+		printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n",
+			name);
+ 		*opt |= (def ? flag : 0);
+ 	} else {
+-		printk(KERN_INFO "%s: set parameter %s to %s\n",
+-			devname, name, val ? "TRUE" : "FALSE");
+		printk(KERN_INFO "via-velocity: set parameter %s to %s\n",
+			name, val ? "TRUE" : "FALSE");
+ 		*opt |= (val ? flag : 0);
+ 	}
+ }
+@@ -438,6 +458,7 @@ static void __devinit velocity_set_bool_
+ static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
+ {
+ 
+	velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname);
+ 	velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
+ 	velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
+ 	velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
+@@ -452,6 +473,7 @@ static void __devinit velocity_get_optio
+ 	velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
+ 	velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
+ 	opts->numrx = (opts->numrx & ~3);
+	vdebug = opts->velo_debug;
+ }
+ 
+ /**
+@@ -466,6 +488,8 @@ static void velocity_init_cam_filter(str
+ {
+ 	struct mac_regs __iomem * regs = vptr->mac_regs;
+ 
+	HAIL("velocity_init_cam_filter");
+
+ 	/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
+ 	WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
+ 	WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
+@@ -484,14 +508,12 @@ static void velocity_init_cam_filter(str
+ 			WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
+ 
+ 		mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
+-		vptr->vCAMmask[0] |= 1;
+-		mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+ 	} else {
+ 		u16 temp = 0;
+ 		mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+-		temp = 1;
+-		mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+ 	}
+	vptr->vCAMmask[0] |= 1;
+	mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+ }
+ 
+ /**
+@@ -508,13 +530,15 @@ static void velocity_rx_reset(struct vel
+ 	struct mac_regs __iomem * regs = vptr->mac_regs;
+ 	int i;
+ 
+	HAIL("velocity_rx_reset");
+ 	vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
+ 
+ 	/*
+ 	 *	Init state, all RD entries belong to the NIC
+ 	 */
+ 	for (i = 0; i < vptr->options.numrx; ++i)
+-		vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
+		/* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */
+		vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
+ 
+ 	writew(vptr->options.numrx, &regs->RBRDU);
+ 	writel(vptr->rd_pool_dma, &regs->RDBaseLo);
+@@ -537,12 +561,15 @@ static void velocity_init_registers(stru
+ 	struct mac_regs __iomem * regs = vptr->mac_regs;
+ 	int i, mii_status;
+ 
+	if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n");
+
+ 	mac_wol_reset(regs);
+ 
+ 	switch (type) {
+ 	case VELOCITY_INIT_RESET:
+ 	case VELOCITY_INIT_WOL:
+ 
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n");
+ 		netif_stop_queue(vptr->dev);
+ 
+ 		/*
+@@ -570,12 +597,13 @@ static void velocity_init_registers(stru
+ 
+ 	case VELOCITY_INIT_COLD:
+ 	default:
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n");
+ 		/*
+ 		 *	Do reset
+ 		 */
+ 		velocity_soft_reset(vptr);
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n");
+ 		mdelay(5);
+-
+ 		mac_eeprom_reload(regs);
+ 		for (i = 0; i < 6; i++) {
+ 			writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
+@@ -593,11 +621,16 @@ static void velocity_init_registers(stru
+ 		 */
+ 		BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
+ 
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n");
+ 		/*
+ 		 *	Init CAM filter
+ 		 */
+		if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n");
+		mdelay(5);  /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */
+ 		velocity_init_cam_filter(vptr);
+		if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n");
+ 
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n");
+ 		/*
+ 		 *	Set packet filter: Receive directed and broadcast address
+ 		 */
+@@ -607,10 +640,12 @@ static void velocity_init_registers(stru
+ 		 *	Enable MII auto-polling
+ 		 */
+ 		enable_mii_autopoll(regs);
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n");
+ 
+ 		vptr->int_mask = INT_MASK_DEF;
+ 
+-		writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo);
+		/* writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo); BE */
+		writel((vptr->rd_pool_dma), &regs->RDBaseLo); /* BE */
+ 		writew(vptr->options.numrx - 1, &regs->RDCSize);
+ 		mac_rx_queue_run(regs);
+ 		mac_rx_queue_wake(regs);
+@@ -618,10 +653,13 @@ static void velocity_init_registers(stru
+ 		writew(vptr->options.numtx - 1, &regs->TDCSize);
+ 
+ 		for (i = 0; i < vptr->num_txq; i++) {
+-			writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
+			/* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */
+			writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */
+ 			mac_tx_queue_run(regs, i);
+ 		}
+ 
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n");
+
+ 		init_flow_control_register(vptr);
+ 
+ 		writel(CR0_STOP, &regs->CR0Clr);
+@@ -640,8 +678,10 @@ static void velocity_init_registers(stru
+ 
+ 		enable_flow_control_ability(vptr);
+ 		mac_hw_mibs_init(regs);
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n");
+ 		mac_write_int_mask(vptr->int_mask, regs);
+ 		mac_clear_isr(regs);
+		if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n");
+ 
+ 	}
+ }
+@@ -659,6 +699,7 @@ static int velocity_soft_reset(struct ve
+ 	struct mac_regs __iomem * regs = vptr->mac_regs;
+ 	int i = 0;
+ 
+	HAIL("velocity_soft_reset");
+ 	writel(CR0_SFRST, &regs->CR0Set);
+ 
+ 	for (i = 0; i < W_MAX_TIMEOUT; i++) {
+@@ -722,6 +763,7 @@ static int __devinit velocity_found1(str
+ 			VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
+ 		printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
+ 		printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
+		printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n");
+ 		first = 0;
+ 	}
+ 
+@@ -934,6 +976,7 @@ static int velocity_init_rings(struct ve
+ 	dma_addr_t pool_dma;
+ 	u8 *pool;
+ 
+	HAIL("velocity_init_rings");
+ 	/*
+ 	 *	Allocate all RD/TD rings a single pool
+ 	 */
+@@ -996,6 +1039,7 @@ static int velocity_init_rings(struct ve
+ static void velocity_free_rings(struct velocity_info *vptr)
+ {
+ 	int size;
+	HAIL("velocity_free_rings");
+ 
+ 	size = vptr->options.numrx * sizeof(struct rx_desc) +
+ 	       vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
+@@ -1012,6 +1056,7 @@ static inline void velocity_give_many_rx
+ 	struct mac_regs __iomem *regs = vptr->mac_regs;
+ 	int avail, dirty, unusable;
+ 
+	HAIL("velocity_give_many_rx_descs");
+ 	/*
+ 	 * RD number must be equal to 4X per hardware spec
+ 	 * (programming guide rev 1.20, p.13)
+@@ -1025,7 +1070,8 @@ static inline void velocity_give_many_rx
+ 	dirty = vptr->rd_dirty - unusable;
+ 	for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
+ 		dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+-		vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
+		/* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */
+		vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
+ 	}
+ 
+ 	writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
+@@ -1035,12 +1081,14 @@ static inline void velocity_give_many_rx
+ static int velocity_rx_refill(struct velocity_info *vptr)
+ {
+ 	int dirty = vptr->rd_dirty, done = 0, ret = 0;
+	HAIL("velocity_rx_refill");
+ 
+ 	do {
+ 		struct rx_desc *rd = vptr->rd_ring + dirty;
+ 
+ 		/* Fine for an all zero Rx desc at init time as well */
+-		if (rd->rdesc0.owner == OWNED_BY_NIC)
+		/* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
+		if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
+ 			break;
+ 
+ 		if (!vptr->rd_info[dirty].skb) {
+@@ -1075,6 +1123,7 @@ static int velocity_init_rd_ring(struct 
+ 	unsigned int rsize = sizeof(struct velocity_rd_info) *
+ 					vptr->options.numrx;
+ 
+	HAIL("velocity_init_rd_ring");
+ 	vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
+ 	if(vptr->rd_info == NULL)
+ 		goto out;
+@@ -1104,6 +1153,7 @@ static void velocity_free_rd_ring(struct
+ {
+ 	int i;
+ 
+	HAIL("velocity_free_rd_ring");
+ 	if (vptr->rd_info == NULL)
+ 		return;
+ 
+@@ -1145,6 +1195,7 @@ static int velocity_init_td_ring(struct 
+ 	unsigned int tsize = sizeof(struct velocity_td_info) *
+ 					vptr->options.numtx;
+ 
+	HAIL("velocity_init_td_ring");
+ 	/* Init the TD ring entries */
+ 	for (j = 0; j < vptr->num_txq; j++) {
+ 		curr = vptr->td_pool_dma[j];
+@@ -1181,6 +1232,7 @@ static void velocity_free_td_ring_entry(
+ 	struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
+ 	int i;
+ 
+	HAIL("velocity_free_td_ring_entry");
+ 	if (td_info == NULL)
+ 		return;
+ 
+@@ -1210,6 +1262,7 @@ static void velocity_free_td_ring(struct
+ {
+ 	int i, j;
+ 
+	HAIL("velocity_free_td_ring");
+ 	for (j = 0; j < vptr->num_txq; j++) {
+ 		if (vptr->td_infos[j] == NULL)
+ 			continue;
+@@ -1237,34 +1290,42 @@ static int velocity_rx_srv(struct veloci
+ 	struct net_device_stats *stats = &vptr->stats;
+ 	int rd_curr = vptr->rd_curr;
+ 	int works = 0;
+	u16 wRSR; /* BE */
+ 
+	HAILS("velocity_rx_srv", status);
+ 	do {
+ 		struct rx_desc *rd = vptr->rd_ring + rd_curr;
+ 
+ 		if (!vptr->rd_info[rd_curr].skb)
+ 			break;
+ 
+-		if (rd->rdesc0.owner == OWNED_BY_NIC)
+		/* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
+		if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
+ 			break;
+ 
+ 		rmb();
+ 
+		wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
+ 		/*
+ 		 *	Don't drop CE or RL error frame although RXOK is off
+ 		 */
+-		if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
+		/* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */
+		if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */
+ 			if (velocity_receive_frame(vptr, rd_curr) < 0)
+ 				stats->rx_dropped++;
+ 		} else {
+-			if (rd->rdesc0.RSR & RSR_CRC)
+			/* if (rd->rdesc0.RSR & RSR_CRC) BE */
+			if (wRSR & RSR_CRC) /* BE */
+ 				stats->rx_crc_errors++;
+-			if (rd->rdesc0.RSR & RSR_FAE)
+			/* if (rd->rdesc0.RSR & RSR_FAE) BE */
+			if (wRSR & RSR_FAE) /* BE */
+ 				stats->rx_frame_errors++;
+ 
+ 			stats->rx_dropped++;
+ 		}
+ 
+-		rd->inten = 1;
+		/* rd->inten = 1; BE */
+		rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
+ 
+ 		vptr->dev->last_rx = jiffies;
+ 
+@@ -1295,13 +1356,21 @@ static int velocity_rx_srv(struct veloci
+ 
+ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
+ {
+	u8 bCSM;
+	HAIL("velocity_rx_csum");
+ 	skb->ip_summed = CHECKSUM_NONE;
+ 
+-	if (rd->rdesc1.CSM & CSM_IPKT) {
+-		if (rd->rdesc1.CSM & CSM_IPOK) {
+-			if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+-					(rd->rdesc1.CSM & CSM_UDPKT)) {
+-				if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
+//	if (rd->rdesc1.CSM & CSM_IPKT) {
+//		if (rd->rdesc1.CSM & CSM_IPOK) {
+//			if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+//					(rd->rdesc1.CSM & CSM_UDPKT)) {
+//				if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
+	bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */
+	if (bCSM & CSM_IPKT) {
+		if (bCSM & CSM_IPOK) {
+			if ((bCSM & CSM_TCPKT) ||
+			    (bCSM & CSM_UDPKT)) {
+				if (!(bCSM & CSM_TUPOK)) {      /* BE */
+ 					return;
+ 				}
+ 			}
+@@ -1327,9 +1396,11 @@ static inline int velocity_rx_copy(struc
+ {
+ 	int ret = -1;
+ 
+	HAIL("velocity_rx_copy");
+ 	if (pkt_size < rx_copybreak) {
+ 		struct sk_buff *new_skb;
+ 
+		HAIL("velocity_rx_copy (working...)");
+ 		new_skb = dev_alloc_skb(pkt_size + 2);
+ 		if (new_skb) {
+ 			new_skb->dev = vptr->dev;
+@@ -1360,10 +1431,12 @@ static inline int velocity_rx_copy(struc
+ static inline void velocity_iph_realign(struct velocity_info *vptr,
+ 					struct sk_buff *skb, int pkt_size)
+ {
+	HAIL("velocity_iph_realign");
+ 	/* FIXME - memmove ? */
+ 	if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
+ 		int i;
+ 
+		HAIL("velocity_iph_realign (working...)");
+ 		for (i = pkt_size; i >= 0; i--)
+ 			*(skb->data + i + 2) = *(skb->data + i);
+ 		skb_reserve(skb, 2);
+@@ -1382,19 +1455,27 @@ static inline void velocity_iph_realign(
+ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
+ {
+ 	void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
+	u16 pkt_len; /* BE */
+	u16 wRSR;    /* BE */
+	struct sk_buff *skb;
+ 	struct net_device_stats *stats = &vptr->stats;
+ 	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+ 	struct rx_desc *rd = &(vptr->rd_ring[idx]);
+-	int pkt_len = rd->rdesc0.len;
+-	struct sk_buff *skb;
+	/* int pkt_len = rd->rdesc0.len BE */;
+
+	pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */
+	wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
+ 
+-	if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
+	HAIL("velocity_receive_frame");
+	/* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */
+	if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */
+ 		VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
+ 		stats->rx_length_errors++;
+ 		return -EINVAL;
+ 	}
+ 
+-	if (rd->rdesc0.RSR & RSR_MAR)
+	/* if (rd->rdesc0.RSR & RSR_MAR) BE */
+	if (wRSR & RSR_MAR) /* BE */
+ 		vptr->stats.multicast++;
+ 
+ 	skb = rd_info->skb;
+@@ -1407,7 +1488,8 @@ static int velocity_receive_frame(struct
+ 	 */
+ 
+ 	if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
+-		if (rd->rdesc0.RSR & RSR_RL) {
+		/* if (rd->rdesc0.RSR & RSR_RL) { BE */
+		if (wRSR & RSR_RL) { /* BE */
+ 			stats->rx_length_errors++;
+ 			return -EINVAL;
+ 		}
+@@ -1451,6 +1533,7 @@ static int velocity_alloc_rx_buf(struct 
+ 	struct rx_desc *rd = &(vptr->rd_ring[idx]);
+ 	struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
+ 
+	HAIL("velocity_alloc_rx_buf");
+ 	rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
+ 	if (rd_info->skb == NULL)
+ 		return -ENOMEM;
+@@ -1468,10 +1551,14 @@ static int velocity_alloc_rx_buf(struct 
+  	 */
+ 
+ 	*((u32 *) & (rd->rdesc0)) = 0;
+-	rd->len = cpu_to_le32(vptr->rx_buf_sz);
+-	rd->inten = 1;
+	/* rd->len = cpu_to_le32(vptr->rx_buf_sz);		BE */
+	/* rd->inten = 1;					BE */
+ 	rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+-	rd->pa_high = 0;
+	/* rd->pa_high = 0;					BE */
+	rd->ltwo &= cpu_to_le32(0xC000FFFFUL);			/* BE */
+	rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16));	/* BE */
+	rd->ltwo |= cpu_to_le32(BE_INT_ENABLE);			/* BE */
+	rd->ltwo &= cpu_to_le32(0xFFFF0000UL);			/* BE */
+ 	return 0;
+ }
+ 
+@@ -1492,9 +1579,11 @@ static int velocity_tx_srv(struct veloci
+ 	int full = 0;
+ 	int idx;
+ 	int works = 0;
+	u16 wTSR; /* BE */
+ 	struct velocity_td_info *tdinfo;
+ 	struct net_device_stats *stats = &vptr->stats;
+ 
+	HAILS("velocity_tx_srv", status);
+ 	for (qnum = 0; qnum < vptr->num_txq; qnum++) {
+ 		for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
+ 			idx = (idx + 1) % vptr->options.numtx) {
+@@ -1505,22 +1594,29 @@ static int velocity_tx_srv(struct veloci
+ 			td = &(vptr->td_rings[qnum][idx]);
+ 			tdinfo = &(vptr->td_infos[qnum][idx]);
+ 
+-			if (td->tdesc0.owner == OWNED_BY_NIC)
+			/* if (td->tdesc0.owner == OWNED_BY_NIC) BE */
+			if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
+ 				break;
+ 
+ 			if ((works++ > 15))
+ 				break;
+ 
+-			if (td->tdesc0.TSR & TSR0_TERR) {
+			wTSR = (u16)cpu_to_le32(td->tdesc0);
+			/* if (td->tdesc0.TSR & TSR0_TERR) { BE */
+			if (wTSR & TSR0_TERR) { /* BE */
+ 				stats->tx_errors++;
+ 				stats->tx_dropped++;
+-				if (td->tdesc0.TSR & TSR0_CDH)
+				/* if (td->tdesc0.TSR & TSR0_CDH) BE */
+				if (wTSR & TSR0_CDH) /* BE */
+ 					stats->tx_heartbeat_errors++;
+-				if (td->tdesc0.TSR & TSR0_CRS)
+				/* if (td->tdesc0.TSR & TSR0_CRS) BE */
+				if (wTSR & TSR0_CRS) /* BE */
+ 					stats->tx_carrier_errors++;
+-				if (td->tdesc0.TSR & TSR0_ABT)
+				/* if (td->tdesc0.TSR & TSR0_ABT) BE */
+				if (wTSR & TSR0_ABT) /* BE */
+ 					stats->tx_aborted_errors++;
+-				if (td->tdesc0.TSR & TSR0_OWC)
+				/* if (td->tdesc0.TSR & TSR0_OWC) BE */
+				if (wTSR & TSR0_OWC) /* BE */
+ 					stats->tx_window_errors++;
+ 			} else {
+ 				stats->tx_packets++;
+@@ -1609,6 +1705,7 @@ static void velocity_print_link_status(s
+ 
+ static void velocity_error(struct velocity_info *vptr, int status)
+ {
+	HAILS("velocity_error", status);
+ 
+ 	if (status & ISR_TXSTLI) {
+ 		struct mac_regs __iomem * regs = vptr->mac_regs;
+@@ -1698,6 +1795,7 @@ static void velocity_free_tx_buf(struct 
+ 	struct sk_buff *skb = tdinfo->skb;
+ 	int i;
+ 
+	HAIL("velocity_free_tx_buf");
+ 	/*
+ 	 *	Don't unmap the pre-allocated tx_bufs
+ 	 */
+@@ -1901,6 +1999,7 @@ static int velocity_xmit(struct sk_buff 
+ 	struct velocity_td_info *tdinfo;
+ 	unsigned long flags;
+ 	int index;
+	u32 lbufsz; /* BE */
+ 
+ 	int pktlen = skb->len;
+ 
+@@ -1917,9 +2016,18 @@ static int velocity_xmit(struct sk_buff 
+ 	td_ptr = &(vptr->td_rings[qnum][index]);
+ 	tdinfo = &(vptr->td_infos[qnum][index]);
+ 
+-	td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
+-	td_ptr->tdesc1.TCR = TCR0_TIC;
+-	td_ptr->td_buf[0].queue = 0;
+	td_ptr->tdesc0 = 0x00000000UL;				  /* BE */
+	td_ptr->tdesc1 = 0x00000000UL;				  /* BE */
+
+	/* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;		BE */
+	td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL);		  /* BE */
+	td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */
+
+	/* td_ptr->tdesc1.TCR = TCR0_TIC;		BE */
+	td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC);		  /* BE */
+
+	/*	td_ptr->td_buf[0].queue = 0;		BE */
+	td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE);  /* BE */
+ 
+ 	/*
+ 	 *	Pad short frames.
+@@ -1931,20 +2039,36 @@ static int velocity_xmit(struct sk_buff 
+ 		memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
+ 		tdinfo->skb = skb;
+ 		tdinfo->skb_dma[0] = tdinfo->buf_dma;
+-		td_ptr->tdesc0.pktsize = pktlen;
+		/* td_ptr->tdesc0.pktsize = pktlen; */
+		td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
+		lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
+		lbufsz = lbufsz << 16; /* BE - shift over     */
+		td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
+
+ 		td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+-		td_ptr->td_buf[0].pa_high = 0;
+-		td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
+		/* td_ptr->td_buf[0].pa_high = 0; */
+		/* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */
+		td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz);   /* BE */
+ 		tdinfo->nskb_dma = 1;
+-		td_ptr->tdesc1.CMDZ = 2;
+		/* td_ptr->tdesc1.CMDZ = 2; */
+		td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
+		td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */
+ 	} else
+ #ifdef VELOCITY_ZERO_COPY_SUPPORT
+	/*
+	 * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT:
+	 * This block of code has NOT been patched up for BE support, as
+	 * it is certainly broken -- if it compiles at all.  Since the BE
+	 * fixes depend on the broken code, attempts to convert to BE support
+	 * would almost certainly confuse more than help.
+	 */
+ 	if (skb_shinfo(skb)->nr_frags > 0) {
+ 		int nfrags = skb_shinfo(skb)->nr_frags;
+ 		tdinfo->skb = skb;
+ 		if (nfrags > 6) {
+ 			skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
+ 			tdinfo->skb_dma[0] = tdinfo->buf_dma;
+			/* BE: Er, exactly what value are we assigning in this next line? */
+ 			td_ptr->tdesc0.pktsize =
+ 			td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+ 			td_ptr->td_buf[0].pa_high = 0;
+@@ -1961,6 +2085,7 @@ static int velocity_xmit(struct sk_buff 
+ 			/* FIXME: support 48bit DMA later */
+ 			td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
+ 			td_ptr->td_buf[i].pa_high = 0;
+			/* BE: This next line can't be right: */
+ 			td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
+ 
+ 			for (i = 0; i < nfrags; i++) {
+@@ -1978,7 +2103,7 @@ static int velocity_xmit(struct sk_buff 
+ 		}
+ 
+ 	} else
+-#endif
+#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */
+ 	{
+ 		/*
+ 		 *	Map the linear network buffer into PCI space and
+@@ -1986,19 +2111,30 @@ static int velocity_xmit(struct sk_buff 
+ 		 */
+ 		tdinfo->skb = skb;
+ 		tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
+-		td_ptr->tdesc0.pktsize = pktlen;
+		/* td_ptr->tdesc0.pktsize = pktlen;			BE */
+		td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL);	/* BE */
+		lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
+		lbufsz = lbufsz << 16;				/* BE */
+		td_ptr->tdesc0 |= cpu_to_le32(lbufsz);		/* BE */
+ 		td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+-		td_ptr->td_buf[0].pa_high = 0;
+-		td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
+		/* td_ptr->td_buf[0].pa_high = 0;			BE */
+		/* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;	BE */
+		td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz);	/* BE */
+
+ 		tdinfo->nskb_dma = 1;
+-		td_ptr->tdesc1.CMDZ = 2;
+		/* td_ptr->tdesc1.CMDZ = 2;				BE */
+		td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL);	/* BE */
+		td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28);/* BE */
+ 	}
+ 
+ 	if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
+-		td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
+-		td_ptr->tdesc1.pqinf.priority = 0;
+-		td_ptr->tdesc1.pqinf.CFI = 0;
+-		td_ptr->tdesc1.TCR |= TCR0_VETAG;
+		/* td_ptr->tdesc1.pqinf.priority = 0;			BE */
+		/* td_ptr->tdesc1.pqinf.CFI = 0;			BE */
+		td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL);	/* BE */
+		/* td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); BE */
+		td_ptr->tdesc1 |= cpu_to_le32((vptr->options.vid & 0xfff)); /* BE */
+		/* td_ptr->tdesc1.TCR |= TCR0_VETAG;			BE */
+		td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG);	/* BE */
+ 	}
+ 
+ 	/*
+@@ -2008,26 +2144,34 @@ static int velocity_xmit(struct sk_buff 
+ 				 && (skb->ip_summed == CHECKSUM_PARTIAL)) {
+ 		const struct iphdr *ip = ip_hdr(skb);
+ 		if (ip->protocol == IPPROTO_TCP)
+-			td_ptr->tdesc1.TCR |= TCR0_TCPCK;
+			/* td_ptr->tdesc1.TCR |= TCR0_TCPCK;	BE */
+			td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK);	/* BE */
+ 		else if (ip->protocol == IPPROTO_UDP)
+-			td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
+-		td_ptr->tdesc1.TCR |= TCR0_IPCK;
+-	}
+			/* td_ptr->tdesc1.TCR |= (TCR0_UDPCK);	BE */
+			td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK);	/* BE */
+		/* td_ptr->tdesc1.TCR |= TCR0_IPCK;		BE */
+		td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK);		/* BE */
+ 	}
+ 	{
+ 
+ 		int prev = index - 1;
+ 
+ 		if (prev < 0)
+ 			prev = vptr->options.numtx - 1;
+-		td_ptr->tdesc0.owner = OWNED_BY_NIC;
+		/* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */
+		td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
+ 		vptr->td_used[qnum]++;
+ 		vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
+ 
+ 		if (AVAIL_TD(vptr, qnum) < 1)
+ 			netif_stop_queue(dev);
+ 
+-		td_ptr = &(vptr->td_rings[qnum][prev]);
+-		td_ptr->td_buf[0].queue = 1;
+ 		td_ptr = &(vptr->td_rings[qnum][prev]);
+ 		/* td_ptr->td_buf[0].queue = 1; BE */
+ 		td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */
+		if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n",
+			(pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index,
+			td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo);
+ 		mac_tx_queue_wake(vptr->mac_regs, qnum);
+ 	}
+ 	dev->trans_start = jiffies;
+@@ -2053,7 +2197,7 @@ static int velocity_intr(int irq, void *
+ 	u32 isr_status;
+ 	int max_count = 0;
+ 
+-
+	HAIL("velocity_intr");
+ 	spin_lock(&vptr->lock);
+ 	isr_status = mac_read_isr(vptr->mac_regs);
+ 
+@@ -2072,7 +2216,10 @@ static int velocity_intr(int irq, void *
+ 
+ 	while (isr_status != 0) {
+ 		mac_write_isr(vptr->mac_regs, isr_status);
+-		if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+		HAILS("velocity_intr",isr_status);
+		/* MJW - velocity_error is ALWAYS called; need to mask off some other flags */
+		/* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */
+		if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0)))
+ 			velocity_error(vptr, isr_status);
+ 		if (isr_status & (ISR_PRXI | ISR_PPRXI))
+ 			max_count += velocity_rx_srv(vptr, isr_status);
+@@ -2110,6 +2257,7 @@ static void velocity_set_multi(struct ne
+ 	int i;
+ 	struct dev_mc_list *mclist;
+ 
+	HAIL("velocity_set_multi");
+ 	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
+ 		writel(0xffffffff, &regs->MARCAM[0]);
+ 		writel(0xffffffff, &regs->MARCAM[4]);
+@@ -2153,6 +2301,7 @@ static struct net_device_stats *velocity
+ {
+ 	struct velocity_info *vptr = netdev_priv(dev);
+ 
+	HAIL("net_device_stats");
+ 	/* If the hardware is down, don't touch MII */
+ 	if(!netif_running(dev))
+ 		return &vptr->stats;
+@@ -2197,6 +2346,7 @@ static int velocity_ioctl(struct net_dev
+ 	struct velocity_info *vptr = netdev_priv(dev);
+ 	int ret;
+ 
+	HAIL("velocity_ioctl");
+ 	/* If we are asked for information and the device is power
+ 	   saving then we need to bring the device back up to talk to it */
+ 
+@@ -2415,6 +2565,7 @@ static int velocity_mii_read(struct mac_
+ {
+ 	u16 ww;
+ 
+	HAIL("velocity_mii_read");
+ 	/*
+ 	 *	Disable MIICR_MAUTO, so that mii addr can be set normally
+ 	 */
+@@ -2451,6 +2602,7 @@ static int velocity_mii_write(struct mac
+ {
+ 	u16 ww;
+ 
+	HAIL("velocity_mii_write");
+ 	/*
+ 	 *	Disable MIICR_MAUTO, so that mii addr can be set normally
+ 	 */
+diff -uprN linux-2.6.23.orig/drivers/net/via-velocity.h linux-2.6.23/drivers/net/via-velocity.h
+--- linux-2.6.23.orig/drivers/net/via-velocity.h	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/drivers/net/via-velocity.h	2007-10-11 00:53:45.000000000 -0500
+@@ -196,64 +196,70 @@
+  *	Receive descriptor
+  */
+ 
+-struct rdesc0 {
+-	u16 RSR;		/* Receive status */
+-	u16 len:14;		/* Received packet length */
+-	u16 reserved:1;
+-	u16 owner:1;		/* Who owns this buffer ? */
+-};
+-
+-struct rdesc1 {
+-	u16 PQTAG;
+-	u8 CSM;
+-	u8 IPKT;
+-};
+//struct rdesc0 {
+//	u16 RSR;		/* Receive status */
+//	u16 len:14;		/* Received packet length */
+//	u16 reserved:1;
+//	u16 owner:1;		/* Who owns this buffer ? */
+//};
+
+//struct rdesc1 {
+//	u16 PQTAG;
+//	u8 CSM;
+//	u8 IPKT;
+//};
+ 
+ struct rx_desc {
+-	struct rdesc0 rdesc0;
+-	struct rdesc1 rdesc1;
+//	struct rdesc0 rdesc0;
+//	struct rdesc1 rdesc1;
+	u32 rdesc0;
+	u32 rdesc1;
+ 	u32 pa_low;		/* Low 32 bit PCI address */
+-	u16 pa_high;		/* Next 16 bit PCI address (48 total) */
+-	u16 len:15;		/* Frame size */
+-	u16 inten:1;		/* Enable interrupt */
+//	u16 pa_high;		/* Next 16 bit PCI address (48 total) */
+//	u16 len:15;		/* Frame size */
+//	u16 inten:1;		/* Enable interrupt */
+	u32 ltwo;
+ } __attribute__ ((__packed__));
+ 
+ /*
+  *	Transmit descriptor
+  */
+ 
+-struct tdesc0 {
+-	u16 TSR;		/* Transmit status register */
+-	u16 pktsize:14;		/* Size of frame */
+-	u16 reserved:1;
+-	u16 owner:1;		/* Who owns the buffer */
+-};
+-
+-struct pqinf {			/* Priority queue info */
+-	u16 VID:12;
+-	u16 CFI:1;
+-	u16 priority:3;
+-} __attribute__ ((__packed__));
+-
+-struct tdesc1 {
+-	struct pqinf pqinf;
+-	u8 TCR;
+-	u8 TCPLS:2;
+-	u8 reserved:2;
+-	u8 CMDZ:4;
+-} __attribute__ ((__packed__));
+//struct tdesc0 {
+//	u16 TSR;		/* Transmit status register */
+//	u16 pktsize:14;		/* Size of frame */
+//	u16 reserved:1;
+//	u16 owner:1;		/* Who owns the buffer */
+//};
+
+//struct pqinf {			/* Priority queue info */
+//	u16 VID:12;
+//	u16 CFI:1;
+//	u16 priority:3;
+//} __attribute__ ((__packed__));
+
+//struct tdesc1 {
+//	struct pqinf pqinf;
+//	u8 TCR;
+//	u8 TCPLS:2;
+//	u8 reserved:2;
+//	u8 CMDZ:4;
+//} __attribute__ ((__packed__));
+ 
+ struct td_buf {
+ 	u32 pa_low;
+-	u16 pa_high;
+-	u16 bufsize:14;
+-	u16 reserved:1;
+-	u16 queue:1;
+//	u16 pa_high;
+//	u16 bufsize:14;
+//	u16 reserved:1;
+//	u16 queue:1;
+	u32 ltwo;
+ } __attribute__ ((__packed__));
+ 
+ struct tx_desc {
+-	struct tdesc0 tdesc0;
+-	struct tdesc1 tdesc1;
+//	struct tdesc0 tdesc0;
+//	struct tdesc1 tdesc1;
+	u32 tdesc0;
+	u32 tdesc1;
+ 	struct td_buf td_buf[7];
+ };
+ 
+@@ -279,6 +285,16 @@ enum  velocity_owner {
+ 	OWNED_BY_NIC = 1
+ };
+ 
+/* Constants added for the BE fixes */
+#define BE_OWNED_BY_NIC    0x80000000UL
+#define BE_INT_ENABLE      0x80000000UL
+#define BE_QUEUE_ENABLE    0x80000000UL
+#define BE_TCR_TIC         0x00800000UL
+#define BE_TCR_VETAG       0x00200000UL
+#define BE_TCR_TCPCK       0x00040000UL
+#define BE_TCR_UDPCK       0x00080000UL
+#define BE_TCR_IPCK        0x00100000UL
+
+ 
+ /*
+  *	MAC registers and macros.
+@@ -1698,6 +1714,7 @@ enum velocity_flow_cntl_type {
+ };
+ 
+ struct velocity_opt {
+	int velo_debug;                 /* debug flag */
+ 	int numrx;			/* Number of RX descriptors */
+ 	int numtx;			/* Number of TX descriptors */
+ 	enum speed_opt spd_dpx;		/* Media link mode */
--- a/target/linux/ixp4xx/patches-2.6.23/013-fsg3_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/013-fsg3_support.patch
@ -0,0 +1,411 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/fsg-pci.c linux-2.6.23/arch/arm/mach-ixp4xx/fsg-pci.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/fsg-pci.c	1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.23/arch/arm/mach-ixp4xx/fsg-pci.c	2007-10-11 00:55:34.000000000 -0500
+@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
+ *
+ * FSG board-level PCI initialization
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init fsg_pci_preinit(void)
+{
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
+		IRQ_FSG_PCI_INTC,
+		IRQ_FSG_PCI_INTB,
+		IRQ_FSG_PCI_INTA,
+	};
+
+	int irq = -1;
+	slot = slot - 11;
+
+	if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
+		pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
+			irq = pci_irq_table[(slot - 1)];
+	}
+        printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
+
+        return irq;
+}
+
+struct hw_pci fsg_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        fsg_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        fsg_map_irq,
+};
+
+int __init fsg_pci_init(void)
+{
+	if (machine_is_fsg())
+		pci_common_init(&fsg_pci);
+	return 0;
+}
+
+subsys_initcall(fsg_pci_init);
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/fsg-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/fsg-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/fsg-setup.c	1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.23/arch/arm/mach-ixp4xx/fsg-setup.c	2007-10-11 00:55:34.000000000 -0500
+@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
+ *
+ * FSG board-setup
+ *
+ * based ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data fsg_flash_data = {
+	.map_name		= "cfi_probe",
+	.width			= 2,
+};
+
+static struct resource fsg_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device fsg_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev.platform_data	= &fsg_flash_data,
+	.num_resources		= 1,
+	.resource		= &fsg_flash_resource,
+};
+
+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
+	.sda_pin		= FSG_SDA_PIN,
+	.scl_pin		= FSG_SCL_PIN,
+};
+
+static struct platform_device fsg_i2c_gpio = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev	 = {
+		.platform_data	= &fsg_i2c_gpio_data,
+	},
+};
+
+#ifdef CONFIG_LEDS_CLASS
+static struct resource fsg_led_resources[] = {
+	{
+		.name           = "ring",
+		.start          = FSG_LED_RING_GPIO,
+		.end            = FSG_LED_RING_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+	{
+		.name           = "sync",
+		.start          = FSG_LED_SYNC_GPIO,
+		.end            = FSG_LED_SYNC_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+	{
+		.name           = "usb",
+		.start          = FSG_LED_USB_GPIO,
+		.end            = FSG_LED_USB_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+	{
+		.name           = "sata",
+		.start          = FSG_LED_SATA_GPIO,
+		.end            = FSG_LED_SATA_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+	{
+		.name           = "wan",
+		.start          = FSG_LED_WAN_GPIO,
+		.end            = FSG_LED_WAN_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+	{
+		.name           = "wlan",
+		.start          = FSG_LED_WLAN_GPIO,
+		.end            = FSG_LED_WLAN_GPIO,
+		.flags          = IXP4XX_GPIO_HIGH,
+	},
+};
+
+static struct platform_device fsg_leds = {
+        .name                   = "IXP4XX-GPIO-LED",
+        .id                     = -1,
+        .num_resources          = ARRAY_SIZE(fsg_led_resources),
+        .resource               = fsg_led_resources,
+};
+#endif
+
+static struct resource fsg_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port fsg_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ }
+};
+
+static struct platform_device fsg_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= fsg_uart_data,
+	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
+	.resource		= fsg_uart_resources,
+};
+
+static struct platform_device *fsg_devices[] __initdata = {
+	&fsg_i2c_gpio,
+	&fsg_flash,
+#ifdef CONFIG_LEDS_IXP4XX
+	&fsg_leds,
+#endif
+};
+
+static void __init fsg_init(void)
+{
+	ixp4xx_sys_init();
+
+	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	fsg_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+        *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+        *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	/* Configure CS2 for operation, 8bit and writable */
+	*IXP4XX_EXP_CS2 = 0xbfff0002;
+
+	/* This is only useful on a modified machine, but it is valuable
+	 * to have it first in order to see debug messages, and so that
+	 * it does *not* get removed if platform_add_devices fails!
+	 */
+	(void)platform_device_register(&fsg_uart);
+
+	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+}
+
+MACHINE_START(FSG, "Freecom FSG-3")
+	/* Maintainer: www.nslu2-linux.org */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= fsg_init,
+MACHINE_END
+
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/Kconfig	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-11 00:55:34.000000000 -0500
+@@ -125,6 +125,15 @@ config	ARCH_IXDP4XX
+ 	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
+ 	default y
+ 
+config MACH_FSG
+	bool
+	prompt "Freecom FSG-3"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Freecom's
+	  FSG-3 device. For more information on this platform
+	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
+
+ #
+ # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+ #
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/Makefile linux-2.6.23/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/Makefile	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-11 00:55:34.000000000 -0500
+@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas10
+ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -28,5 +29,6 @@ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-se
+ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -uprN linux-2.6.23.orig/include/asm-arm/arch-ixp4xx/fsg.h linux-2.6.23/include/asm-arm/arch-ixp4xx/fsg.h
+--- linux-2.6.23.orig/include/asm-arm/arch-ixp4xx/fsg.h	1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.23/include/asm-arm/arch-ixp4xx/fsg.h	2007-10-11 00:55:34.000000000 -0500
+@@ -0,0 +1,74 @@
+/*
+ * include/asm-arm/arch-ixp4xx/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV		3
+#define FSG_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN	6
+#define FSG_PCI_INTB_PIN	7
+#define FSG_PCI_INTC_PIN	5
+
+/* Buttons */
+
+#define FSG_SB_GPIO		4
+#define FSG_RB_GPIO		9
+#define FSG_UB_GPIO		10
+
+#define FSG_SB_IRQ		IRQ_IXP4XX_GPIO4
+#define FSG_RB_IRQ		IRQ_IXP4XX_GPIO9
+#define FSG_UB_IRQ		IRQ_IXP4XX_GPIO10
+
+#define FSG_SB_BM		(1L << FSG_SB_GPIO)
+#define FSG_RB_BM		(1L << FSG_RB_GPIO)
+#define FSG_UB_BM		(1L << FSG_UB_GPIO)
+
+/* LEDs */
+
+#define FSG_LED_RING_GPIO	0
+#define FSG_LED_SYNC_GPIO	1
+#define FSG_LED_USB_GPIO	2
+#define FSG_LED_SATA_GPIO	3
+#define FSG_LED_WAN_GPIO	4
+#define FSG_LED_WLAN_GPIO	5
+
+/* %%% REMOVE %%%
+#define FSG_PCI_SLOT0_PIN	6
+#define FSG_PCI_SLOT1_PIN	7
+
+#define	FSG_PCI_SLOT0_DEVID	14
+#define	FSG_PCI_SLOT1_DEVID	15
+
+#define	FSG_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define	FSG_IDE_BASE_VIRT	0xFFFE1000
+#define	FSG_IDE_REGION_SIZE	0x1000
+
+#define	FSG_IDE_DATA_PORT	0xFFFE10E0
+#define	FSG_IDE_CTRL_PORT	0xFFFE10FC
+#define	FSG_IDE_ERROR_PORT	0xFFFE10E2
+*/
+diff -uprN linux-2.6.23.orig/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.23/include/asm-arm/arch-ixp4xx/hardware.h
+--- linux-2.6.23.orig/include/asm-arm/arch-ixp4xx/hardware.h	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/include/asm-arm/arch-ixp4xx/hardware.h	2007-10-11 00:55:34.000000000 -0500
+@@ -45,5 +45,6 @@
+ #include "nslu2.h"
+ #include "nas100d.h"
+ #include "dsmg600.h"
+#include "fsg.h"
+ 
+ #endif  /* _ASM_ARCH_HARDWARE_H */
+diff -uprN linux-2.6.23.orig/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.23/include/asm-arm/arch-ixp4xx/irqs.h
+--- linux-2.6.23.orig/include/asm-arm/arch-ixp4xx/irqs.h	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/include/asm-arm/arch-ixp4xx/irqs.h	2007-10-11 00:55:34.000000000 -0500
+@@ -128,4 +128,17 @@
+ #define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+ #define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+ 
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
+#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
+#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
+
+/* %%% REMOVE %%%
+#define	IRQ_FSG_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define	IRQ_FSG_PCI_SLOT1	IRQ_IXP4XX_GPIO7
+#define	IRQ_FSG_IDE		IRQ_IXP4XX_GPIO5
+*/
+
+ #endif
--- a/target/linux/ixp4xx/patches-2.6.23/014-eeprom_new_notifier.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/014-eeprom_new_notifier.patch
@ -0,0 +1,187 @@
+diff -uprN linux-2.6.23.orig/drivers/i2c/chips/eeprom.c linux-2.6.23/drivers/i2c/chips/eeprom.c
+--- linux-2.6.23.orig/drivers/i2c/chips/eeprom.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/drivers/i2c/chips/eeprom.c	2007-10-11 00:57:25.000000000 -0500
+@@ -33,6 +33,8 @@
+ #include <linux/jiffies.h>
+ #include <linux/i2c.h>
+ #include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/eeprom.h>
+ 
+ /* Addresses to scan */
+ static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD_1(eeprom);
+ 
+-
+-/* Size of EEPROM in bytes */
+-#define EEPROM_SIZE		256
+-
+-/* possible types of eeprom devices */
+-enum eeprom_nature {
+-	UNKNOWN,
+-	VAIO,
+-};
+-
+-/* Each client has this additional data */
+-struct eeprom_data {
+-	struct i2c_client client;
+-	struct mutex update_lock;
+-	u8 valid;			/* bitfield, bit!=0 if slice is valid */
+-	unsigned long last_updated[8];	/* In jiffies, 8 slices */
+-	u8 data[EEPROM_SIZE];		/* Register values */
+-	enum eeprom_nature nature;
+-};
+-
+ATOMIC_NOTIFIER_HEAD(eeprom_chain);
+ 
+ static int eeprom_attach_adapter(struct i2c_adapter *adapter);
+ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
+@@ -191,6 +174,7 @@ static int eeprom_detect(struct i2c_adap
+ 	data->valid = 0;
+ 	mutex_init(&data->update_lock);
+ 	data->nature = UNKNOWN;
+	data->attr = &eeprom_attr;
+ 
+ 	/* Tell the I2C layer a new client has arrived */
+ 	if ((err = i2c_attach_client(new_client)))
+@@ -214,6 +198,9 @@ static int eeprom_detect(struct i2c_adap
+ 	if (err)
+ 		goto exit_detach;
+ 
+	/* call the notifier chain */
+	atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
+
+ 	return 0;
+ 
+ exit_detach:
+@@ -239,6 +226,41 @@ static int eeprom_detach_client(struct i
+ 	return 0;
+ }
+ 
+/**
+ * register_eeprom_notifier - register a 'user' of EEPROM devices.
+ * @nb: pointer to notifier info structure
+ *
+ * Registers a callback function to be called upon detection
+ * of an EEPROM device.  Detection invokes the 'add' callback
+ * with the kobj of the mutex and a bin_attribute which allows
+ * read from the EEPROM.  The intention is that the notifier
+ * will be able to read system configuration from the notifier.
+ *
+ * Only EEPROMs detected *after* the addition of the notifier
+ * are notified.  I.e. EEPROMs already known to the system
+ * will not be notified - add the notifier from board level
+ * code!
+ */
+int register_eeprom_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&eeprom_chain, nb);
+}
+
+/**
+ *	unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
+ *	@old: pointer to notifier info structure
+ *
+ *	Removes a callback function from the list of 'users' to be
+ *	notified upon detection of EEPROM devices.
+ */
+int unregister_eeprom_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&eeprom_chain, nb);
+}
+
+EXPORT_SYMBOL_GPL(register_eeprom_notifier);
+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
+
+ static int __init eeprom_init(void)
+ {
+ 	return i2c_add_driver(&eeprom_driver);
+diff -uprN linux-2.6.23.orig/include/linux/eeprom.h linux-2.6.23/include/linux/eeprom.h
+--- linux-2.6.23.orig/include/linux/eeprom.h	1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.23/include/linux/eeprom.h	2007-10-11 00:57:25.000000000 -0500
+@@ -0,0 +1,71 @@
+#ifndef _LINUX_EEPROM_H
+#define _LINUX_EEPROM_H
+/*
+ *  EEPROM notifier header
+ *
+ *  Copyright (C) 2006 John Bowler
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __KERNEL__
+#error This is a kernel header
+#endif
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+/* Size of EEPROM in bytes */
+#define EEPROM_SIZE             256
+
+/* possible types of eeprom devices */
+enum eeprom_nature {
+	UNKNOWN,
+	VAIO,
+};
+
+/* Each client has this additional data */
+struct eeprom_data {
+	struct i2c_client client;
+	struct mutex update_lock;
+	u8 valid;			/* bitfield, bit!=0 if slice is valid */
+	unsigned long last_updated[8];	/* In jiffies, 8 slices */
+	u8 data[EEPROM_SIZE];		/* Register values */
+	enum eeprom_nature nature;
+	struct bin_attribute *attr;
+};
+
+/*
+ * This is very basic.
+ *
+ * If an EEPROM is detected on the I2C bus (this only works for
+ * I2C EEPROMs) the notifier chain  is called with
+ * both the I2C information and the kobject for the sysfs
+ * device which has been registers.  It is then possible to
+ * read from the device via the bin_attribute::read method
+ * to extract configuration information.
+ *
+ * Register the notifier in the board level code, there is no
+ * need to unregister it but you can if you want (it will save
+ * a little bit or kernel memory to do so).
+ */
+
+extern int register_eeprom_notifier(struct notifier_block *nb);
+extern int unregister_eeprom_notifier(struct notifier_block *nb);
+
+#endif /* _LINUX_EEPROM_H */
+diff -uprN linux-2.6.23.orig/include/linux/notifier.h linux-2.6.23/include/linux/notifier.h
+--- linux-2.6.23.orig/include/linux/notifier.h	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/include/linux/notifier.h	2007-10-11 00:57:25.000000000 -0500
+@@ -231,5 +231,8 @@ static inline int notifier_to_errno(int 
+ #define PM_SUSPEND_PREPARE	0x0003 /* Going to suspend the system */
+ #define PM_POST_SUSPEND		0x0004 /* Suspend finished */
+ 
+/* eeprom notifier chain */
+#define EEPROM_REGISTER		0x0001
+
+ #endif /* __KERNEL__ */
+ #endif /* _LINUX_NOTIFIER_H */
--- a/target/linux/ixp4xx/patches-2.6.23/015-nas100d_pata_artop_single_port.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/015-nas100d_pata_artop_single_port.patch
@ -0,0 +1,23 @@
+diff -uprN linux-2.6.23.orig/drivers/ata/pata_artop.c linux-2.6.23/drivers/ata/pata_artop.c
+--- linux-2.6.23.orig/drivers/ata/pata_artop.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/drivers/ata/pata_artop.c	2007-10-11 00:59:14.000000000 -0500
+@@ -27,6 +27,7 @@
+ #include <scsi/scsi_host.h>
+ #include <linux/libata.h>
+ #include <linux/ata.h>
+#include <asm/mach-types.h>
+ 
+ #define DRV_NAME	"pata_artop"
+ #define DRV_VERSION	"0.4.4"
+@@ -489,6 +490,11 @@ static int artop_init_one (struct pci_de
+ 		pci_read_config_byte(pdev, 0x4a, &reg);
+ 		pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ 
+		/* NAS100D workaround - probing second port kills uhci_hcd */
+#ifdef CONFIG_MACH_NAS100D
+		if (machine_is_nas100d())
+			ppi[1] = &ata_dummy_port_info;
+#endif
+ 	}
+ 
+ 	BUG_ON(ppi[0] == NULL);
--- a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
@ -0,0 +1,36 @@
+---
+ arch/arm/mach-ixp4xx/dsmg600-power.c |   13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+===================================================================
+--- linux-2.6.22-rc5-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-power.c
+++ linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+@@ -50,6 +50,13 @@
+ 	if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
+ 
+ 		/* IO Pin is 1 (button pushed) */
+		if (power_button_countdown > 0) {
+			power_button_countdown--;
+		}
+
+	} else {
+
+		/* Done on button release, to allow for auto-power-on mods. */
+ 		if (power_button_countdown == 0) {
+ 			/* Signal init to do the ctrlaltdel action, this will bypass
+ 			 * init if it hasn't started and do a kernel_restart.
+@@ -58,11 +65,9 @@
+ 
+ 			/* Change the state of the power LED to "blink" */
+ 			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+		} else {
+			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ 		}
+-		power_button_countdown--;
+-
+-	} else {
+-		power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ 	}
+ 
+ 	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
--- a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
@ -0,0 +1,133 @@
+---
+ arch/arm/mach-ixp4xx/nas100d-power.c  |   68 ++++++++++++++++++++++++++++++++--
+ include/asm-arm/arch-ixp4xx/nas100d.h |   18 +++++----
+ 2 files changed, 75 insertions(+), 11 deletions(-)
+
+Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
+===================================================================
+--- linux-2.6.22-rc5-armeb.orig/arch/arm/mach-ixp4xx/nas100d-power.c
+++ linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
+@@ -21,15 +21,60 @@
+ #include <linux/irq.h>
+ #include <linux/module.h>
+ #include <linux/reboot.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+ 
+ #include <asm/mach-types.h>
+ 
+-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+extern void ctrl_alt_del(void);
+
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static volatile int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void nas100d_power_handler(unsigned long data);
+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
+
+static void nas100d_power_handler(unsigned long data)
+ {
+-	/* Signal init to do the ctrlaltdel action, this will bypass init if
+-	 * it hasn't started and do a kernel_restart.
+	/* This routine is called twice per second to check the
+	 * state of the power button.
+ 	 */
+-	ctrl_alt_del();
+
+	if (*IXP4XX_GPIO_GPINR & NAS100D_PB_BM) {
+
+		/* IO Pin is 1 (button pushed) */
+		if (power_button_countdown > 0) {
+			power_button_countdown--;
+		}
+
+	} else {
+
+		/* Done on button release, to allow for auto-power-on mods. */
+		if (power_button_countdown == 0) {
+			/* Signal init to do the ctrlaltdel action, this will bypass
+			 * init if it hasn't started and do a kernel_restart.
+			 */
+			ctrl_alt_del();
+
+			/* Change the state of the power LED to "blink" */
+			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+		} else {
+			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+		}
+	}
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly. */
+	machine_power_off();
+ 
+ 	return IRQ_HANDLED;
+ }
+@@ -50,6 +95,19 @@
+ 		return -EIO;
+ 	}
+ 
+	/* The power button on the Iomega NAS100d is on GPIO 14, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+ 	return 0;
+ }
+ 
+@@ -58,6 +116,8 @@
+ 	if (!(machine_is_nas100d()))
+ 		return;
+ 
+	del_timer_sync(&nas100d_power_timer);
+
+ 	free_irq(NAS100D_RB_IRQ, NULL);
+ }
+ 
+Index: linux-2.6.22-rc5-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
+===================================================================
+--- linux-2.6.22-rc5-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h
+++ linux-2.6.22-rc5-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
+@@ -39,14 +39,18 @@
+ /* Buttons */
+ 
+ #define NAS100D_PB_GPIO         14
+#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
+
+ #define NAS100D_RB_GPIO         4
+-#define NAS100D_PO_GPIO         12   /* power off */
+ 
+-#define NAS100D_PB_IRQ          IRQ_IXP4XX_GPIO14
+ #define NAS100D_RB_IRQ          IRQ_IXP4XX_GPIO4
+ 
+-/*
+-#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
+-#define NAS100D_PO_BM           (1L << NAS100D_PO_GPIO)
+-#define NAS100D_RB_BM           (1L << NAS100D_RB_GPIO)
+-*/
+#define NAS100D_PO_GPIO         12   /* power off */
+
+/* LEDs */
+
+#define NAS100D_LED_PWR_GPIO	15
+#define NAS100D_LED_PWR_BM	(1L << NAS100D_LED_PWR_GPIO)
+
+#define NAS100D_LED_WLAN_GPIO	0
+#define NAS100D_LED_WLAN_BM	(1L << NAS100D_LED_WLAN_GPIO)
--- a/target/linux/ixp4xx/patches-2.6.23/021-nslu2_i2c_gpio_driver_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/021-nslu2_i2c_gpio_driver_support.patch
@ -0,0 +1,47 @@
+diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
+index 9bf8ccb..77277d2 100644
+--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -18,6 +18,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+#include <linux/i2c-gpio.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -41,7 +42,7 @@ static struct platform_device nslu2_flash = {
+ 	.resource		= &nslu2_flash_resource,
+ };
+ 
+-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
+ 	.sda_pin		= NSLU2_SDA_PIN,
+ 	.scl_pin		= NSLU2_SCL_PIN,
+ };
+@@ -82,11 +83,12 @@ static struct platform_device nslu2_leds = {
+ };
+ #endif
+ 
+-static struct platform_device nslu2_i2c_controller = {
+-	.name			= "IXP4XX-I2C",
+static struct platform_device nslu2_i2c_gpio = {
+	.name			= "i2c-gpio",
+ 	.id			= 0,
+-	.dev.platform_data	= &nslu2_i2c_gpio_pins,
+-	.num_resources		= 0,
+	.dev	 = {
+		.platform_data	= &nslu2_i2c_gpio_data,
+	},
+ };
+ 
+ static struct platform_device nslu2_beeper = {
+@@ -139,7 +141,7 @@ static struct platform_device nslu2_uart = {
+ };
+ 
+ static struct platform_device *nslu2_devices[] __initdata = {
+-	&nslu2_i2c_controller,
+	&nslu2_i2c_gpio,
+ 	&nslu2_flash,
+ 	&nslu2_beeper,
+ #ifdef CONFIG_LEDS_IXP4XX
--- a/target/linux/ixp4xx/patches-2.6.23/022-nas100d_i2c_gpio_driver_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/022-nas100d_i2c_gpio_driver_support.patch
@ -0,0 +1,44 @@
+diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
+index 78a1741..54d884f 100644
+--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -16,6 +16,7 @@
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+#include <linux/i2c-gpio.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -68,16 +69,17 @@ static struct platform_device nas100d_leds = {
+ };
+ #endif
+ 
+-static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
+ 	.sda_pin		= NAS100D_SDA_PIN,
+ 	.scl_pin		= NAS100D_SCL_PIN,
+ };
+ 
+-static struct platform_device nas100d_i2c_controller = {
+-	.name			= "IXP4XX-I2C",
+static struct platform_device nas100d_i2c_gpio = {
+	.name			= "i2c-gpio",
+ 	.id			= 0,
+-	.dev.platform_data	= &nas100d_i2c_gpio_pins,
+-	.num_resources		= 0,
+	.dev	 = {
+		.platform_data	= &nas100d_i2c_gpio_data,
+	},
+ };
+ 
+ static struct resource nas100d_uart_resources[] = {
+@@ -124,7 +126,7 @@ static struct platform_device nas100d_uart = {
+ };
+ 
+ static struct platform_device *nas100d_devices[] __initdata = {
+-	&nas100d_i2c_controller,
+	&nas100d_i2c_gpio,
+ 	&nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nas100d_leds,
--- a/target/linux/ixp4xx/patches-2.6.23/023-avila_i2c_gpio_driver_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/023-avila_i2c_gpio_driver_support.patch
@ -0,0 +1,45 @@
+Index: linux-2.6.22-rc3-git2-armeb/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.22-rc3-git2-armeb.orig/arch/arm/mach-ixp4xx/avila-setup.c	2007-05-31 04:05:33.000000000 -0700
+++ linux-2.6.22-rc3-git2-armeb/arch/arm/mach-ixp4xx/avila-setup.c	2007-05-31 04:12:50.000000000 -0700
+@@ -18,6 +18,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
+#include <linux/i2c-gpio.h>
+ 
+ #include <asm/types.h>
+ #include <asm/setup.h>
+@@ -47,18 +48,17 @@
+ 	.resource	= &avila_flash_resource,
+ };
+ 
+-static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
+ 	.sda_pin	= AVILA_SDA_PIN,
+ 	.scl_pin	= AVILA_SCL_PIN,
+ };
+ 
+-static struct platform_device avila_i2c_controller = {
+-	.name		= "IXP4XX-I2C",
+static struct platform_device avila_i2c_gpio = {
+	.name		= "i2c-gpio",
+ 	.id		= 0,
+-	.dev		= {
+-		.platform_data = &avila_i2c_gpio_pins,
+	.dev	 = {
+		.platform_data	= &avila_i2c_gpio_data,
+ 	},
+-	.num_resources	= 0
+ };
+ 
+ static struct resource avila_uart_resources[] = {
+@@ -133,7 +133,7 @@
+ };
+ 
+ static struct platform_device *avila_devices[] __initdata = {
+-	&avila_i2c_controller,
+	&avila_i2c_gpio,
+ 	&avila_flash,
+ 	&avila_uart
+ };
--- a/target/linux/ixp4xx/patches-2.6.23/025-dsmg600_i2c_gpio_driver_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/025-dsmg600_i2c_gpio_driver_support.patch
@ -0,0 +1,43 @@
+Index: linux-2.6.22-rc3-git2-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- linux-2.6.22-rc3-git2-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c	2007-05-31 04:05:30.000000000 -0700
+++ linux-2.6.22-rc3-git2-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c	2007-05-31 04:13:02.000000000 -0700
+@@ -14,6 +14,7 @@
+ #include <linux/kernel.h>
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
+#include <linux/i2c-gpio.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -37,15 +38,17 @@
+ 	.resource		= &dsmg600_flash_resource,
+ };
+ 
+-static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
+ 	.sda_pin		= DSMG600_SDA_PIN,
+ 	.scl_pin		= DSMG600_SCL_PIN,
+ };
+ 
+-static struct platform_device dsmg600_i2c_controller = {
+-	.name			= "IXP4XX-I2C",
+static struct platform_device dsmg600_i2c_gpio = {
+	.name			= "i2c-gpio",
+ 	.id			= 0,
+-	.dev.platform_data	= &dsmg600_i2c_gpio_pins,
+	.dev	 = {
+		.platform_data	= &dsmg600_i2c_gpio_data,
+	},
+ };
+ 
+ #ifdef CONFIG_LEDS_CLASS
+@@ -116,7 +119,7 @@
+ };
+ 
+ static struct platform_device *dsmg600_devices[] __initdata = {
+-	&dsmg600_i2c_controller,
+	&dsmg600_i2c_gpio,
+ 	&dsmg600_flash,
+ };
+ 
--- a/target/linux/ixp4xx/patches-2.6.23/026-ixdp425_i2c_gpio_driver_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/026-ixdp425_i2c_gpio_driver_support.patch
@ -0,0 +1,44 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-setup.c	2007-10-11 01:01:02.000000000 -0500
+@@ -15,6 +15,7 @@
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
+#include <linux/i2c-gpio.h>
+ #include <linux/io.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
+@@ -120,18 +121,17 @@ static struct platform_device ixdp425_fl
+ };
+ #endif	/* CONFIG_MTD_NAND_PLATFORM */
+ 
+-static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
+ 	.sda_pin	= IXDP425_SDA_PIN,
+ 	.scl_pin	= IXDP425_SCL_PIN,
+ };
+ 
+-static struct platform_device ixdp425_i2c_controller = {
+-	.name		= "IXP4XX-I2C",
+static struct platform_device ixdp425_i2c_gpio = {
+	.name		= "i2c-gpio",
+ 	.id		= 0,
+-	.dev		= {
+-		.platform_data = &ixdp425_i2c_gpio_pins,
+	.dev	 = {
+		.platform_data	= &ixdp425_i2c_gpio_data,
+ 	},
+-	.num_resources	= 0
+ };
+ 
+ static struct resource ixdp425_uart_resources[] = {
+@@ -178,7 +178,7 @@ static struct platform_device ixdp425_ua
+ };
+ 
+ static struct platform_device *ixdp425_devices[] __initdata = {
+-	&ixdp425_i2c_controller,
+	&ixdp425_i2c_gpio,
+ 	&ixdp425_flash,
+ #if defined(CONFIG_MTD_NAND_PLATFORM) || \
+     defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
--- a/target/linux/ixp4xx/patches-2.6.23/051-nslu2_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/051-nslu2_mac_plat_info.patch
@ -0,0 +1,36 @@
+diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
+index 77277d2..e0d0dde 100644
+--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -140,6 +140,23 @@ static struct platform_device nslu2_uart = {
+ 	.resource		= nslu2_uart_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nslu2_plat_eth[] = {
+	{
+		.phy		= 1,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}
+};
+
+static struct platform_device nslu2_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= nslu2_plat_eth,
+	}
+};
+
+ static struct platform_device *nslu2_devices[] __initdata = {
+ 	&nslu2_i2c_gpio,
+ 	&nslu2_flash,
+@@ -147,6 +164,7 @@ static struct platform_device *nslu2_devices[] __initdata = {
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nslu2_leds,
+ #endif
+	&nslu2_eth[0],
+ };
+ 
+ static void nslu2_power_off(void)
--- a/target/linux/ixp4xx/patches-2.6.23/052-nas100d_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/052-nas100d_mac_plat_info.patch
@ -0,0 +1,35 @@
+diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
+index 54d884f..d4d8540 100644
+--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -125,12 +125,30 @@ static struct platform_device nas100d_uart = {
+ 	.resource		= nas100d_uart_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nas100d_plat_eth[] = {
+        {
+                .phy            = 0,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }
+};
+
+static struct platform_device nas100d_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = nas100d_plat_eth,
+        }
+};
+
+ static struct platform_device *nas100d_devices[] __initdata = {
+ 	&nas100d_i2c_gpio,
+ 	&nas100d_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&nas100d_leds,
+ #endif
+	&nas100d_eth[0],
+ };
+ 
+ static void nas100d_power_off(void)
--- a/target/linux/ixp4xx/patches-2.6.23/053-avila_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/053-avila_mac_plat_info.patch
@ -0,0 +1,43 @@
+diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
+index e38f45f..10ed5d6 100644
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -132,10 +132,37 @@ static struct platform_device avila_pata = {
+ 	.resource		= avila_pata_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info avila_plat_eth[] = {
+        {
+                .phy            = 0,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 1,
+                .rxq            = 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device avila_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = avila_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = avila_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *avila_devices[] __initdata = {
+ 	&avila_i2c_gpio,
+ 	&avila_flash,
+-	&avila_uart
+	&avila_uart,
+	&avila_eth[0],
+	&avila_eth[1],
+ };
+ 
+ static void __init avila_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/054-fsg3_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/054-fsg3_mac_plat_info.patch
@ -0,0 +1,44 @@
+diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
+index 11336e6..ec3d517 100644
+--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -142,12 +142,39 @@ static struct platform_device fsg_uart = {
+ 	.resource		= fsg_uart_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info fsg_plat_eth[] = {
+        {
+                .phy            = 5,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 4,
+                .rxq            = 4,
+		.txreadyq	= 21,
+        }
+};
+
+static struct platform_device fsg_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = fsg_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = fsg_plat_eth + 1,
+        }
+};
+
+ static struct platform_device *fsg_devices[] __initdata = {
+ 	&fsg_i2c_gpio,
+ 	&fsg_flash,
+ #ifdef CONFIG_LEDS_IXP4XX
+ 	&fsg_leds,
+ #endif
+	&fsg_eth[0],
+	&fsg_eth[1],
+ };
+ 
+ static void __init fsg_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/061-nslu2_setup_mac.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/061-nslu2_setup_mac.patch
@ -0,0 +1,52 @@
+diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
+index e0d0dde..6e24916 100644
+--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
+@@ -19,6 +19,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ #include <linux/i2c-gpio.h>
+#include <linux/mtd/mtd.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -167,6 +168,30 @@ static struct platform_device *nslu2_devices[] __initdata = {
+ 	&nslu2_eth[0],
+ };
+ 
+static void nslu2_flash_add(struct mtd_info *mtd)
+{
+	if (strcmp(mtd->name, "RedBoot") == 0) {
+		size_t retlen;
+		u_char mac[6];
+
+		if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
+			printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+			mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+			memcpy(nslu2_plat_eth[0].hwaddr, mac, 6);
+		} else {
+			printk(KERN_ERR "nslu2 mac: read failed\n");
+		}
+	}
+}
+
+static void nslu2_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nslu2_flash_notifier = {
+	.add = nslu2_flash_add,
+	.remove = nslu2_flash_remove,
+};
+
+ static void nslu2_power_off(void)
+ {
+ 	/* This causes the box to drop the power and go dead. */
+@@ -209,6 +234,8 @@ static void __init nslu2_init(void)
+ 	(void)platform_device_register(&nslu2_uart);
+ 
+ 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+
+	register_mtd_user(&nslu2_flash_notifier);
+ }
+ 
+ MACHINE_START(NSLU2, "Linksys NSLU2")
--- a/target/linux/ixp4xx/patches-2.6.23/062-nas100d_setup_mac.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/062-nas100d_setup_mac.patch
@ -0,0 +1,52 @@
+diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
+index d4d8540..b8c99fa 100644
+--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
+@@ -17,6 +17,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ #include <linux/i2c-gpio.h>
+#include <linux/mtd/mtd.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -151,6 +152,30 @@ static struct platform_device *nas100d_devices[] __initdata = {
+ 	&nas100d_eth[0],
+ };
+ 
+static void nas100d_flash_add(struct mtd_info *mtd)
+{
+	if (strcmp(mtd->name, "RedBoot config") == 0) {
+		size_t retlen;
+		u_char mac[6];
+
+		if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
+			printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+			memcpy(nas100d_plat_eth[0].hwaddr, mac, 6);
+		} else {
+			printk(KERN_ERR "nas100d mac: read failed\n");
+		}
+	}
+}
+
+static void nas100d_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nas100d_flash_notifier = {
+	.add = nas100d_flash_add,
+	.remove = nas100d_flash_remove,
+};
+
+ static void nas100d_power_off(void)
+ {
+ 	/* This causes the box to drop the power and go dead. */
+@@ -183,6 +208,8 @@ static void __init nas100d_init(void)
+ 	(void)platform_device_register(&nas100d_uart);
+ 
+ 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+
+	register_mtd_user(&nas100d_flash_notifier);
+ }
+ 
+ MACHINE_START(NAS100D, "Iomega NAS 100d")
--- a/target/linux/ixp4xx/patches-2.6.23/064-fsg3_setup_mac.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/064-fsg3_setup_mac.patch
@ -0,0 +1,56 @@
+diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
+index ec3d517..7cc7201 100644
+--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -16,6 +16,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ #include <linux/i2c-gpio.h>
+#include <linux/mtd/mtd.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -177,6 +178,34 @@ static struct platform_device *fsg_devices[] __initdata = {
+ 	&fsg_eth[1],
+ };
+ 
+static void fsg_flash_add(struct mtd_info *mtd)
+{
+	if (strcmp(mtd->name, "RedBoot config") == 0) {
+		size_t retlen;
+		u_char mac[6];
+
+		if (mtd->read(mtd, 0x0422, 6, &retlen, mac) == 0 && retlen == 6) {
+			printk(KERN_INFO "eth0 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+			memcpy(fsg_plat_eth[0].hwaddr, mac, 6);
+			mac[5]++;
+			printk(KERN_INFO "eth1 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+				mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+			memcpy(fsg_plat_eth[1].hwaddr, mac, 6);
+		} else {
+			printk(KERN_ERR "fsg mac: read failed\n");
+		}
+	}
+}
+
+static void fsg_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier fsg_flash_notifier = {
+	.add = fsg_flash_add,
+	.remove = fsg_flash_remove,
+};
+
+ static void __init fsg_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -198,6 +227,8 @@ static void __init fsg_init(void)
+ 	(void)platform_device_register(&fsg_uart);
+ 
+ 	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
+
+	register_mtd_user(&fsg_flash_notifier);
+ }
+ 
+ MACHINE_START(FSG, "Freecom FSG-3")
--- a/target/linux/ixp4xx/patches-2.6.23/090-increase_entropy_pools.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/090-increase_entropy_pools.patch
@ -0,0 +1,17 @@
+Index: linux-2.6.19/drivers/char/random.c
+===================================================================
+--- linux-2.6.19.orig/drivers/char/random.c
+++ linux-2.6.19/drivers/char/random.c
+@@ -248,9 +248,9 @@
+ /*
+  * Configuration information
+  */
+-#define INPUT_POOL_WORDS 128
+-#define OUTPUT_POOL_WORDS 32
+-#define SEC_XFER_SIZE 512
+#define INPUT_POOL_WORDS 256
+#define OUTPUT_POOL_WORDS 64
+#define SEC_XFER_SIZE 1024
+ 
+ /*
+  * The minimum number of bits of entropy before we wake up a read on
--- a/target/linux/ixp4xx/patches-2.6.23/091-nslu2_rtc_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/091-nslu2_rtc_fixup.patch
@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/nslu2-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/nslu2-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/nslu2-setup.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/nslu2-setup.c	2007-10-11 01:04:46.000000000 -0500
+@@ -19,6 +19,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ 
+#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -171,6 +172,35 @@ static struct sys_timer nslu2_timer = {
+     .init   = nslu2_timer_init,
+ };
+ 
+static char nslu2_rtc_probe[] __initdata = "rtc-isl1208.ignore=0,0x6f rtc-x1205.probe=0,0x6f ";
+
+static void __init nslu2_fixup(struct machine_desc *desc,
+                struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+    struct tag *t = tags;
+    char *p = *cmdline;
+
+    /* Find the end of the tags table, taking note of any cmdline tag. */
+    for (; t->hdr.size; t = tag_next(t)) {
+        if (t->hdr.tag == ATAG_CMDLINE) {
+            p = t->u.cmdline.cmdline;
+        }
+    }
+
+    /* Overwrite the end of the table with a new cmdline tag. */
+    t->hdr.tag = ATAG_CMDLINE;
+    t->hdr.size = (sizeof (struct tag_header) +
+        strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+    strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
+    strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
+        COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
+
+    /* Terminate the table. */
+    t = tag_next(t);
+    t->hdr.tag = ATAG_NONE;
+    t->hdr.size = 0;
+}
+
+ static void __init nslu2_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -196,6 +226,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
+	.fixup          = nslu2_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &nslu2_timer,
--- a/target/linux/ixp4xx/patches-2.6.23/092-nas100d_rtc_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/092-nas100d_rtc_fixup.patch
@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/nas100d-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/nas100d-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/nas100d-setup.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/nas100d-setup.c	2007-10-11 01:06:33.000000000 -0500
+@@ -17,6 +17,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/leds.h>
+ 
+#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -142,6 +143,35 @@ static void nas100d_power_off(void)
+ 	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
+ }
+ 
+static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
+
+static void __init nas100d_fixup(struct machine_desc *desc,
+                struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+    struct tag *t = tags;
+    char *p = *cmdline;
+
+    /* Find the end of the tags table, taking note of any cmdline tag. */
+    for (; t->hdr.size; t = tag_next(t)) {
+        if (t->hdr.tag == ATAG_CMDLINE) {
+            p = t->u.cmdline.cmdline;
+        }
+    }
+
+    /* Overwrite the end of the table with a new cmdline tag. */
+    t->hdr.tag = ATAG_CMDLINE;
+    t->hdr.size = (sizeof (struct tag_header) +
+        strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+    strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
+    strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
+        COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
+
+    /* Terminate the table. */
+    t = tag_next(t);
+    t->hdr.tag = ATAG_NONE;
+    t->hdr.size = 0;
+}
+
+ static void __init nas100d_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -170,6 +200,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d"
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
+	.fixup          = nas100d_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &ixp4xx_timer,
--- a/target/linux/ixp4xx/patches-2.6.23/093-avila_rtc_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/093-avila_rtc_fixup.patch
@ -0,0 +1,55 @@
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c	2007-10-11 01:08:21.000000000 -0500
+@@ -138,6 +138,35 @@ static struct platform_device *avila_dev
+ 	&avila_uart
+ };
+ 
+static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
+
+static void __init avila_fixup(struct machine_desc *desc,
+                struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+    struct tag *t = tags;
+    char *p = *cmdline;
+
+    /* Find the end of the tags table, taking note of any cmdline tag. */
+    for (; t->hdr.size; t = tag_next(t)) {
+        if (t->hdr.tag == ATAG_CMDLINE) {
+            p = t->u.cmdline.cmdline;
+        }
+    }
+
+    /* Overwrite the end of the table with a new cmdline tag. */
+    t->hdr.tag = ATAG_CMDLINE;
+    t->hdr.size = (sizeof (struct tag_header) +
+        strlen(avila_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+    strlcpy(t->u.cmdline.cmdline, avila_rtc_probe, COMMAND_LINE_SIZE);
+    strlcpy(t->u.cmdline.cmdline + strlen(avila_rtc_probe), p,
+        COMMAND_LINE_SIZE - strlen(avila_rtc_probe));
+
+    /* Terminate the table. */
+    t = tag_next(t);
+    t->hdr.tag = ATAG_NONE;
+    t->hdr.size = 0;
+}
+
+ static void __init avila_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -165,6 +194,7 @@ MACHINE_START(AVILA, "Gateworks Avila Ne
+ 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup          = avila_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
+@@ -182,6 +212,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc 
+ 	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup          = avila_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer		= &ixp4xx_timer,
--- a/target/linux/ixp4xx/patches-2.6.23/095-dsmg600_rtc_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/095-dsmg600_rtc_fixup.patch
@ -0,0 +1,56 @@
+Index: linux-2.6.22-rc4-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+===================================================================
+--- linux-2.6.22-rc4-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ linux-2.6.22-rc4-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
+@@ -16,6 +16,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/i2c-gpio.h>
+ 
+#include <asm/setup.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+@@ -145,6 +146,35 @@ static struct sys_timer dsmg600_timer = 
+     .init   = dsmg600_timer_init,
+ };
+ 
+static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
+
+static void __init dsmg600_fixup(struct machine_desc *desc,
+                struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+    struct tag *t = tags;
+    char *p = *cmdline;
+
+    /* Find the end of the tags table, taking note of any cmdline tag. */
+    for (; t->hdr.size; t = tag_next(t)) {
+        if (t->hdr.tag == ATAG_CMDLINE) {
+            p = t->u.cmdline.cmdline;
+        }
+    }
+
+    /* Overwrite the end of the table with a new cmdline tag. */
+    t->hdr.tag = ATAG_CMDLINE;
+    t->hdr.size = (sizeof (struct tag_header) +
+        strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+    strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE);
+    strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p,
+        COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe));
+
+    /* Terminate the table. */
+    t = tag_next(t);
+    t->hdr.tag = ATAG_NONE;
+    t->hdr.size = 0;
+}
+
+ static void __init dsmg600_init(void)
+ {
+ 	ixp4xx_sys_init();
+@@ -177,6 +207,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 
+ 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+ 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ 	.boot_params	= 0x00000100,
+	.fixup          = dsmg600_fixup,
+ 	.map_io		= ixp4xx_map_io,
+ 	.init_irq	= ixp4xx_init_irq,
+ 	.timer          = &dsmg600_timer,
--- a/target/linux/ixp4xx/patches-2.6.23/096-kexec_cmdline.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/096-kexec_cmdline.patch
@ -0,0 +1,178 @@
+diff -uprN linux-2.6.23.orig/kernel/ksysfs.c linux-2.6.23/kernel/ksysfs.c
+--- linux-2.6.23.orig/kernel/ksysfs.c	2007-10-09 15:31:38.000000000 -0500
+++ linux-2.6.23/kernel/ksysfs.c	2007-10-11 01:10:26.000000000 -0500
+@@ -49,6 +49,165 @@ KERNEL_ATTR_RW(uevent_helper);
+ #endif
+ 
+ #ifdef CONFIG_KEXEC
+
+#include <asm/setup.h>
+
+extern unsigned long kexec_boot_params;
+
+char kexec_cmdline[COMMAND_LINE_SIZE] = "";
+
+static void
+replace_cmdline_tag(void)
+{
+	char *t;
+	struct tag *real;
+	struct tag *copy;
+	struct tag *rend;
+	int i;
+
+/* TODO: check the return params */
+	t = kmalloc(KEXEC_BOOT_PARAMS_SIZE + COMMAND_LINE_SIZE, GFP_KERNEL);
+	memset((void *)t, 0, KEXEC_BOOT_PARAMS_SIZE + COMMAND_LINE_SIZE);
+
+/* TODO: validate that the boot params are ATAGS, in fact */
+
+	copy = (struct tag *)t;
+	real = (struct tag *)kexec_boot_params;
+	rend = (struct tag *)(kexec_boot_params + KEXEC_BOOT_PARAMS_SIZE);
+	while ((real->hdr.size) && (real < rend)) {
+		if (real->hdr.tag != ATAG_CMDLINE) {
+			memcpy((void *)copy, (void *)real, real->hdr.size * 4);
+			copy = tag_next(copy);
+		}
+		real = tag_next(real);
+	}
+
+/* TODO: validate that we have enough space in the buffer */
+	
+	i = strlen(kexec_cmdline);
+	if (i) {
+		copy->hdr.tag = ATAG_CMDLINE;
+		copy->hdr.size = (sizeof(struct tag_header) + i + 1 + 4) >> 2;
+		strcpy(copy->u.cmdline.cmdline, kexec_cmdline);
+		copy = tag_next(copy);
+	}
+
+	copy->hdr.tag = ATAG_NONE;            /* Empty tag ends list */
+	copy->hdr.size = 0;                   /* zero length */
+
+/* TODO: validate that the temporary buffer isn't too full */
+
+	memcpy((void *)kexec_boot_params, (void *)t, KEXEC_BOOT_PARAMS_SIZE);
+
+	kfree(t);  /* Don't forget to free the big buffer we used */
+}
+
+static ssize_t kexec_cmdline_show(struct kset *kset, char *page)
+{
+	return sprintf(page, "%s\n", kexec_cmdline);
+}
+
+static ssize_t kexec_cmdline_store(struct kset *kset, const char *page,
+				   size_t count)
+{
+	if ((count + 1) > COMMAND_LINE_SIZE)
+		count = COMMAND_LINE_SIZE;
+	memcpy(kexec_cmdline, page, count);
+	kexec_cmdline[count] = '\0';
+	if (count && (kexec_cmdline[count - 1] == '\n'))
+		kexec_cmdline[count - 1] = '\0';
+	replace_cmdline_tag();
+	return count;
+}
+KERNEL_ATTR_RW(kexec_cmdline);
+
+static ssize_t kexec_boot_params_show(struct kset *kset, char *page)
+{
+	unsigned long *p;
+	char buf[PAGE_SIZE];
+	int keep_doing;
+
+	p = (unsigned long *)kexec_boot_params;
+
+	/* if this doesn't look like atags, just print first few words */
+	if (p[1] != ATAG_CORE)
+		return sprintf(page, "0x%lx 0x%lx 0x%lx 0x%lx\n",
+			       p[0], p[1], p[2], p[3]);
+
+	/* carefully walk the atag list, and print out the structure */
+	keep_doing = 1;
+	do {
+		switch (p[1]) {
+		case ATAG_CORE:
+			/* watch out, core tag is permitted to be empty */
+			if (p[0] == 5)
+				sprintf(buf,
+					"CORE flg=%ld pgsz=%ld rdev=0x%lx\n",
+					p[2], p[3], p[4]);
+			else
+				sprintf(buf,"CORE\n");
+			break;
+		case ATAG_MEM:
+			sprintf(buf,"MEM  %ldM@0x%lx\n", p[2] / (1024 * 1024),
+				p[3]);
+			break;
+		case ATAG_VIDEOTEXT:
+			sprintf(buf,"VIDEOTEXT sz=%ld\n", p[0]);
+			break;
+		case ATAG_RAMDISK:
+			sprintf(buf,"RAMDISK prmpt=%ld %ldK@0x%lx\n",
+				p[2], p[3], p[4]);
+			break;
+		case ATAG_INITRD2:
+			sprintf(buf,"INITRD2 %ldK@0x%lx\n", p[3] / 1024, p[2]);
+			break;
+		case ATAG_SERIAL:
+			sprintf(buf,"SERIAL high=0x%08lx low=0x%08lx\n",
+				p[3], p[2]);
+			break;
+		case ATAG_REVISION:
+			sprintf(buf,"REVISION rev=%ld\n", p[2]);
+			break;
+		case ATAG_VIDEOLFB:
+			sprintf(buf,"VIDEOLFB sz=%ld\n", p[0]);
+			break;
+		case ATAG_CMDLINE:
+			sprintf(buf,"CMD  \"%s\"\n", (char *)&p[2]);
+			break;
+		case ATAG_NONE:
+			sprintf(buf,"NONE\n");
+			keep_doing = 0;
+			break;
+		default:
+			sprintf(buf,"-unknown- sz=%ld\n", p[0]);
+			break;
+		}
+
+		/* carefully add to page */
+		if ((strlen(buf) + strlen(page)) < PAGE_SIZE) {
+			strcat(page, buf);
+		} else {
+			keep_doing = 0;
+		}
+
+		/* stop when we encounter a header length of 0 */
+		if (p[0] == 0)
+			keep_doing = 0;
+
+		/* go to the next tag */
+		p += p[0];
+
+		/* stop if we walked off the end of the buffer */
+		if (p > (unsigned long *)(kexec_boot_params +
+					  KEXEC_BOOT_PARAMS_SIZE))
+			keep_doing = 0;
+
+	} while (keep_doing);
+
+	return (strlen(page));
+}
+KERNEL_ATTR_RO(kexec_boot_params);
+
+ static ssize_t kexec_loaded_show(struct kset *kset, char *page)
+ {
+ 	return sprintf(page, "%d\n", !!kexec_image);
+@@ -95,6 +254,8 @@ static struct attribute * kernel_attrs[]
+ #ifdef CONFIG_KEXEC
+ 	&kexec_loaded_attr.attr,
+ 	&kexec_crash_loaded_attr.attr,
+	&kexec_cmdline_attr.attr,
+	&kexec_boot_params_attr.attr,
+ #endif
+ 	NULL
+ };
--- a/target/linux/ixp4xx/patches-2.6.23/100-gateway7001_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/100-gateway7001_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c	2007-10-22 15:09:33.000000000 +0200
+@@ -76,9 +76,36 @@
+ 	.resource	= &gateway7001_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info gateway7001_plat_eth[] = {
+        {
+                .phy            = 1,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 2,
+                .rxq            = 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device gateway7001_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = gateway7001_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = gateway7001_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ 	&gateway7001_flash,
+-	&gateway7001_uart
+	&gateway7001_uart,
+	&gateway7001_eth[0],
+	&gateway7001_eth[1],
+ };
+ 
+ static void __init gateway7001_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/101-wg302_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/101-wg302_mac_plat_info.patch
@ -0,0 +1,31 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c	2007-10-22 15:02:20.000000000 +0200
+@@ -77,9 +77,27 @@
+ 	.resource	= &wg302v2_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info wg302_plat_eth[] = {
+	{
+		.phy		= 8,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}
+};
+
+static struct platform_device wg302_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= wg302_plat_eth,
+	}
+};
+
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ 	&wg302v2_flash,
+ 	&wg302v2_uart,
+	&wg302_eth[0],
+ };
+ 
+ static void __init wg302v2_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/110-pronghorn_metro_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/110-pronghorn_metro_support.patch
@ -0,0 +1,292 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-22 14:47:50.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-22 15:16:43.000000000 +0200
+@@ -57,6 +57,14 @@
+ 	  WG302 v2 or WAG302 v2 Access Points. For more information
+ 	  on this platform, see http://openwrt.org
+ 
+config MACH_PRONGHORNMETRO
+	bool "Pronghorn Metro"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the ADI 
+	  Engineering Pronghorn Metro Platform. For more
+	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-22 14:47:50.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-22 15:26:15.000000000 +0200
+@@ -16,6 +16,7 @@
+ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -30,6 +31,7 @@
+ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c	2007-10-22 15:16:43.000000000 +0200
+@@ -0,0 +1,74 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
+ *
+ * PCI setup routines for ADI Engineering Pronghorn Metro
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init pronghornmetro_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 13)
+		return IRQ_IXP4XX_GPIO4;
+	else if (slot == 14)
+		return IRQ_IXP4XX_GPIO6;
+	else if (slot == 15)
+		return IRQ_IXP4XX_GPIO11;
+	else if (slot == 16)
+		return IRQ_IXP4XX_GPIO1;
+	else return -1;
+}
+
+struct hw_pci pronghornmetro_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        pronghornmetro_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        pronghornmetro_map_irq,
+};
+
+int __init pronghornmetro_pci_init(void)
+{
+	if (machine_is_pronghorn_metro())
+		pci_common_init(&pronghornmetro_pci);
+	return 0;
+}
+
+subsys_initcall(pronghornmetro_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:36:35.000000000 +0200
+@@ -0,0 +1,147 @@
+/*
+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+ *
+ * Board setup for the ADI Engineering Pronghorn Metro
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data pronghornmetro_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource pronghornmetro_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device pronghornmetro_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &pronghornmetro_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &pronghornmetro_flash_resource,
+};
+
+static struct resource pronghornmetro_uart_resource = {
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port pronghornmetro_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device pronghornmetro_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pronghornmetro_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &pronghornmetro_uart_resource,
+};
+
+static struct resource pronghornmetro_pata_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "intrq",
+		.start	= IRQ_IXP4XX_GPIO0,
+		.end	= IRQ_IXP4XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ixp4xx_pata_data pronghornmetro_pata_data = {
+	.cs0_bits	= 0xbfff0043,
+	.cs1_bits	= 0xbfff0043,
+};
+
+static struct platform_device pronghornmetro_pata = {
+	.name			= "pata_ixp4xx_cf",
+	.id			= 0,
+	.dev.platform_data      = &pronghornmetro_pata_data,
+	.num_resources		= ARRAY_SIZE(pronghornmetro_pata_resources),
+	.resource		= pronghornmetro_pata_resources,
+};
+
+static struct platform_device *pronghornmetro_devices[] __initdata = {
+	&pronghornmetro_flash,
+	&pronghornmetro_uart,
+};
+
+static void __init pronghornmetro_init(void)
+{
+	ixp4xx_sys_init();
+
+	pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
+
+	pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+	pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+
+	pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+	pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+	pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
+	pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+
+	platform_device_register(&pronghornmetro_pata);
+}
+
+#ifdef CONFIG_MACH_PRONGHORNMETRO
+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= pronghornmetro_init,
+MACHINE_END
+#endif
+diff -Nur linux-2.6.23/Documentation/arm/IXP4xx linux-2.6.23-owrt/Documentation/arm/IXP4xx
+--- linux-2.6.23/Documentation/arm/IXP4xx	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/Documentation/arm/IXP4xx	2007-10-22 15:16:43.000000000 +0200
+@@ -111,6 +111,9 @@
+    the platform has two mini-PCI slots used for 802.11[bga] cards.
+    Finally, there is an IDE port hanging off the expansion bus.
+ 
+ADI Engineering Pronghorn Metro Platform
+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
+
+ Gateworks Avila Network Platform
+ http://www.gateworks.com/avila_sbc.htm
+ 
+diff -Nur linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h	2007-10-22 14:47:50.000000000 +0200
+++ linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h	2007-10-22 15:18:47.000000000 +0200
+@@ -41,7 +41,8 @@
+ 	 * Some boards are using UART2 as console
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+-			 machine_is_gateway7001() || machine_is_wg302v2())
+			 machine_is_gateway7001() || machine_is_wg302v2() ||
+			 machine_is_pronghorn_metro())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/target/linux/ixp4xx/patches-2.6.23/111-pronghorn_metro_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/111-pronghorn_metro_mac_plat_info.patch
@ -0,0 +1,40 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:41:27.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c	2007-10-22 15:43:30.000000000 +0200
+@@ -104,9 +104,36 @@
+ 	.resource		= pronghornmetro_pata_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info pronghornmetro_plat_eth[] = {
+        {
+                .phy            = 0,
+                .rxq            = 3,
+		.txreadyq	= 20,
+        }, {
+                .phy            = 1,
+                .rxq            = 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device pronghornmetro_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = pronghornmetro_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = pronghornmetro_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *pronghornmetro_devices[] __initdata = {
+ 	&pronghornmetro_flash,
+ 	&pronghornmetro_uart,
+	&pronghornmetro_eth[0],
+	&pronghornmetro_eth[1],
+ };
+ 
+ static void __init pronghornmetro_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch
@ -0,0 +1,185 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:03:34.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:22:41.000000000 +0200
+@@ -65,6 +65,14 @@
+ 	  Engineering Pronghorn Metro Platform. For more
+ 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
+config MACH_COMPEX
+	bool "Compex WP18 / NP18A"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Compex' 
+	  WP18 or NP18A boards. For more information on this
+	  platform, see http://openwrt.org
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:03:34.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:22:41.000000000 +0200
+@@ -17,6 +17,7 @@
+ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -32,6 +33,7 @@
+ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:22:41.000000000 +0200
+@@ -0,0 +1,120 @@
+/*
+ * arch/arm/mach-ixp4xx/compex-setup.c
+ *
+ * Ccompex WP18 / NP18A board-setup
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data compex_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource compex_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device compex_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &compex_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &compex_flash_resource,
+};
+
+static struct resource compex_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port compex_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device compex_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= compex_uart_data,
+	.num_resources		= 2,
+	.resource		= compex_uart_resources,
+};
+
+static struct platform_device *compex_devices[] __initdata = {
+	&compex_flash,
+	&compex_uart
+};
+
+static void __init compex_init(void)
+{
+	ixp4xx_sys_init();
+
+	compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	compex_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
+}
+
+#ifdef CONFIG_MACH_COMPEX
+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= compex_init,
+MACHINE_END
+#endif
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-10-23 18:22:41.000000000 +0200
+@@ -66,7 +66,7 @@
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435())
+			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
+diff -Nur linux-2.6.23/arch/arm/tools/mach-types linux-2.6.23-owrt/arch/arm/tools/mach-types
+--- linux-2.6.23/arch/arm/tools/mach-types	2007-10-09 22:31:38.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/tools/mach-types	2007-10-23 18:22:41.000000000 +0200
+@@ -1278,7 +1278,7 @@
+ smdk6400		MACH_SMDK6400		SMDK6400		1270
+ nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
+ greenphone		MACH_GREENPHONE		GREENPHONE		1272
+-compex42x		MACH_COMPEXWP18		COMPEXWP18		1273
+compex			MACH_COMPEX		COMPEX			1273
+ xmate			MACH_XMATE		XMATE			1274
+ energizer		MACH_ENERGIZER		ENERGIZER		1275
+ ime1			MACH_IME1		IME1			1276
--- a/target/linux/ixp4xx/patches-2.6.23/121-compex_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/121-compex_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:39:29.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c	2007-10-23 18:45:34.000000000 +0200
+@@ -90,9 +90,36 @@
+ 	.resource		= compex_uart_resources,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info compex_plat_eth[] = {
+	{
+		.phy		= -1,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 3,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device compex_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= compex_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= compex_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *compex_devices[] __initdata = {
+ 	&compex_flash,
+-	&compex_uart
+	&compex_uart,
+	&compex_eth[0],
+	&compex_eth[1],
+ };
+ 
+ static void __init compex_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/130-wrt300nv2_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/130-wrt300nv2_support.patch
@ -0,0 +1,230 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 18:39:29.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:11:31.000000000 +0200
+@@ -73,6 +73,14 @@
+ 	  WP18 or NP18A boards. For more information on this
+ 	  platform, see http://openwrt.org
+ 
+config MACH_WRT300NV2
+	bool "Linksys WRT300N v2"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Linksys' 
+	  WRT300N v2 router. For more information on this
+	  platform, see http://openwrt.org
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 18:39:29.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:11:31.000000000 +0200
+@@ -18,6 +18,7 @@
+ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -34,6 +35,7 @@
+ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c	2007-10-23 19:11:31.000000000 +0200
+@@ -0,0 +1,65 @@
+/*
+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
+ *
+ * PCI setup routines for Linksys WRT300N v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init wrt300nv2_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO8;
+	else return -1;
+}
+
+struct hw_pci wrt300nv2_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        wrt300nv2_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        wrt300nv2_map_irq,
+};
+
+int __init wrt300nv2_pci_init(void)
+{
+	if (machine_is_wrt300nv2())
+		pci_common_init(&wrt300nv2_pci);
+	return 0;
+}
+
+subsys_initcall(wrt300nv2_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:11:31.000000000 +0200
+@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+ *
+ * Board setup for the Linksys WRT300N v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wrt300nv2_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource wrt300nv2_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device wrt300nv2_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &wrt300nv2_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &wrt300nv2_flash_resource,
+};
+
+static struct resource wrt300nv2_uart_resource = {
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device wrt300nv2_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= wrt300nv2_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &wrt300nv2_uart_resource,
+};
+
+static struct platform_device *wrt300nv2_devices[] __initdata = {
+	&wrt300nv2_flash,
+	&wrt300nv2_uart
+};
+
+static void __init wrt300nv2_init(void)
+{
+	ixp4xx_sys_init();
+
+	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
+}
+
+#ifdef CONFIG_MACH_WRT300NV2
+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= wrt300nv2_init,
+MACHINE_END
+#endif
+diff -Nur linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.23/include/asm-arm/arch-ixp4xx/uncompress.h	2007-10-23 18:03:35.000000000 +0200
+++ linux-2.6.23-owrt/include/asm-arm/arch-ixp4xx/uncompress.h	2007-10-23 19:12:30.000000000 +0200
+@@ -42,7 +42,7 @@
+ 	 */
+ 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ 			 machine_is_gateway7001() || machine_is_wg302v2() ||
+-			 machine_is_pronghorn_metro())
+			 machine_is_pronghorn_metro() || machine_is_wrt300nv2())
+ 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ 	else
+ 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/target/linux/ixp4xx/patches-2.6.23/131-wrt300nv2_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/131-wrt300nv2_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:20:08.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c	2007-10-23 19:22:19.000000000 +0200
+@@ -76,9 +76,36 @@
+ 	.resource	= &wrt300nv2_uart_resource,
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info wrt300nv2_plat_eth[] = {
+	{
+		.phy		= -1,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device wrt300nv2_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= wrt300nv2_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= wrt300nv2_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ 	&wrt300nv2_flash,
+-	&wrt300nv2_uart
+	&wrt300nv2_uart,
+	&wrt300nv2_eth[0],
+	&wrt300nv2_eth[1],
+ };
+ 
+ static void __init wrt300nv2_init(void)
--- a/target/linux/ixp4xx/patches-2.6.23/140-sidewinder_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/140-sidewinder_support.patch
@ -0,0 +1,240 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:20:08.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-10-23 19:26:46.000000000 +0200
+@@ -65,6 +65,14 @@
+ 	  Engineering Pronghorn Metro Platform. For more
+ 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+ 
+config MACH_SIDEWINDER
+	bool "Sidewinder"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the ADI 
+	  Engineering Sidewinder Platform. For more
+	  information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+ config MACH_COMPEX
+ 	bool "Compex WP18 / NP18A"
+ 	select PCI
+@@ -163,7 +171,7 @@
+ #
+ config CPU_IXP46X
+ 	bool
+-	depends on MACH_IXDP465
+	depends on MACH_IXDP465 || MACH_SIDEWINDER
+ 	default y
+ 
+ config CPU_IXP43X
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:20:08.000000000 +0200
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile	2007-10-23 19:23:52.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -36,6 +37,7 @@
+ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c	2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
+ *
+ * PCI setup routines for ADI Engineering Sidewinder
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init sidewinder_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO11;
+	else if (slot == 2)
+		return IRQ_IXP4XX_GPIO10;
+	else if (slot == 3)
+		return IRQ_IXP4XX_GPIO9;
+	else return -1;
+}
+
+struct hw_pci sidewinder_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        sidewinder_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        sidewinder_map_irq,
+};
+
+int __init sidewinder_pci_init(void)
+{
+	if (machine_is_sidewinder())
+		pci_common_init(&sidewinder_pci);
+	return 0;
+}
+
+subsys_initcall(sidewinder_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c	2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
+ *
+ * Board setup for the ADI Engineering Sidewinder
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data sidewinder_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource sidewinder_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sidewinder_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &sidewinder_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sidewinder_flash_resource,
+};
+
+static struct resource sidewinder_uart_resources[] = {
+	{
+	.start	= IXP4XX_UART1_BASE_PHYS,
+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+	},
+	{
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port sidewinder_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device sidewinder_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= sidewinder_uart_data,
+	},
+	.num_resources	= 2,
+	.resource	= &sidewinder_uart_resources,
+};
+
+static struct platform_device *sidewinder_devices[] __initdata = {
+	&sidewinder_flash,
+	&sidewinder_uart,
+};
+
+static void __init sidewinder_init(void)
+{
+	ixp4xx_sys_init();
+
+	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
+}
+
+#ifdef CONFIG_MACH_SIDEWINDER
+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= sidewinder_init,
+MACHINE_END
+#endif
--- a/target/linux/ixp4xx/patches-2.6.23/150-lanready_ap1000_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/150-lanready_ap1000_support.patch
@ -0,0 +1,212 @@
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 13:58:58.000000000 +0100
+@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-ixp4xx/ap1000-setup.c
+ *
+ * Lanready AP-1000
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on ixdp425-setup.c:
+ *	Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data ap1000_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource ap1000_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ap1000_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &ap1000_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ap1000_flash_resource,
+};
+
+static struct resource ap1000_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port ap1000_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device ap1000_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= ap1000_uart_data,
+	.num_resources		= 2,
+	.resource		= ap1000_uart_resources
+};
+
+static struct platform_device *ap1000_devices[] __initdata = {
+	&ap1000_flash,
+	&ap1000_uart
+};
+
+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
+
+static void __init ap1000_fixup(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+
+{
+	struct tag *t = tags;
+	char *p = *cmdline;
+
+	/* Find the end of the tags table, taking note of any cmdline tag. */
+	for (; t->hdr.size; t = tag_next(t)) {
+		if (t->hdr.tag == ATAG_CMDLINE) {
+			p = t->u.cmdline.cmdline;
+		}
+	}
+
+	/* Overwrite the end of the table with a new cmdline tag. */
+	t->hdr.tag = ATAG_CMDLINE;
+	t->hdr.size = (sizeof (struct tag_header) +
+		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
+	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
+	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
+		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
+
+	/* Terminate the table. */
+	t = tag_next(t);
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+}
+
+static void __init ap1000_init(void)
+{
+	ixp4xx_sys_init();
+
+	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	ap1000_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
+}
+
+#ifdef CONFIG_MACH_AP1000
+MACHINE_START(AP1000, "Lanready AP-1000")
+	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup		= ap1000_fixup,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= ap1000_init,
+MACHINE_END
+#endif
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c	2007-11-14 13:27:16.000000000 +0100
+@@ -66,7 +66,8 @@
+ int __init ixdp425_pci_init(void)
+ {
+ 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+-			machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
+			machine_is_ixdp465() || machine_is_kixrp435() ||
+			machine_is_compex() || machine_is_ap1000())
+ 		pci_common_init(&ixdp425_pci);
+ 	return 0;
+ }
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig	2007-11-14 13:25:07.000000000 +0100
+@@ -89,6 +89,14 @@
+ 	  WRT300N v2 router. For more information on this
+ 	  platform, see http://openwrt.org
+ 
+config MACH_AP1000
+	bool "Lanready AP-1000"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Lanready's
+	  AP1000 board. For more information on this
+	  platform, see http://openwrt.org
+
+ config ARCH_IXDP425
+ 	bool "IXDP425"
+ 	help
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile	2007-11-14 13:31:29.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
+obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
+ 
+ obj-y	+= common.o
+ 
+@@ -38,5 +39,6 @@
+ obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
+obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
+ 
+ obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+diff -Nur linux-2.6.23.1/arch/arm/tools/mach-types linux-2.6.23.1-owrt/arch/arm/tools/mach-types
+--- linux-2.6.23.1/arch/arm/tools/mach-types	2007-11-14 13:15:50.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/tools/mach-types	2007-11-14 13:26:06.000000000 +0100
+@@ -1367,3 +1367,4 @@
+ csb726			MACH_CSB726		CSB726			1359
+ tik27			MACH_TIK27		TIK27			1360
+ mx_uc7420		MACH_MX_UC7420		MX_UC7420		1361
+ap1000			MACH_AP1000		AP1000			1543
--- a/target/linux/ixp4xx/patches-2.6.23/151-lanready_ap1000_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/151-lanready_ap1000_mac_plat_info.patch
@ -0,0 +1,41 @@
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 14:11:10.000000000 +0100
+++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c	2007-11-14 14:09:30.000000000 +0100
+@@ -90,9 +90,36 @@
+ 	.resource		= ap1000_uart_resources
+ };
+ 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ap1000_plat_eth[] = {
+	{
+		.phy		= 4,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 5,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device ap1000_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= ap1000_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= ap1000_plat_eth + 1,
+	}
+};
+
+ static struct platform_device *ap1000_devices[] __initdata = {
+ 	&ap1000_flash,
+-	&ap1000_uart
+	&ap1000_uart,
+	&ap1000_eth[0],
+	&ap1000_eth[1],
+ };
+ 
+ static char ap1000_mem_fixup[] __initdata = "mem=64M ";
--- a/target/linux/ixp4xx/patches-2.6.23/200-npe_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/200-npe_driver.patch
--- a/target/linux/ixp4xx/patches-2.6.23/201-npe_driver_print_license_location.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/201-npe_driver_print_license_location.patch
@ -0,0 +1,12 @@
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2007-10-22 22:18:15.000000000 +0200
+++ linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c	2007-10-22 22:32:48.000000000 +0200
+@@ -585,6 +585,8 @@
+ 	npe_reset(npe);
+ #endif
+ 
+	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
+
+ 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ 		  (image->id >> 8) & 0xFF, image->id & 0xFF);