mirror of https://github.com/hak5/openwrt-owl.git
Imre Kaloz
parent
b72a5b42bd
commit
e40c8c45ba
|
|
@ -0,0 +1,353 @@
|
|||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:10:51.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:11:12.000000000 +0200
|
||||
@@ -49,6 +49,22 @@
|
||||
WG302 v2 or WAG302 v2 Access Points. For more information
|
||||
on this platform, see http://openwrt.org
|
||||
|
||||
+config MACH_PRONGHORN
|
||||
+ bool "Pronghorn"
|
||||
+ select PCI
|
||||
+ help
|
||||
+ Say 'Y' here if you want your kernel to support the ADI
|
||||
+ Engineering Pronghorn Platform. For more
|
||||
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
|
||||
+
|
||||
+config MACH_PRONGHORNMETRO
|
||||
+ bool "Pronghorn Metro"
|
||||
+ select PCI
|
||||
+ help
|
||||
+ Say 'Y' here if you want your kernel to support the ADI
|
||||
+ Engineering Pronghorn Metro Platform. For more
|
||||
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
|
||||
+
|
||||
config ARCH_IXDP425
|
||||
bool "IXDP425"
|
||||
help
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:10:51.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:15:51.000000000 +0200
|
||||
@@ -13,6 +13,7 @@
|
||||
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
||||
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
||||
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
||||
+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -24,5 +25,6 @@
|
||||
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
|
||||
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
||||
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
||||
+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
|
||||
|
||||
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2007-04-02 16:17:35.000000000 +0200
|
||||
@@ -0,0 +1,70 @@
|
||||
+/*
|
||||
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
|
||||
+ *
|
||||
+ * PCI setup routines for ADI Engineering Pronghorn Metro platform
|
||||
+ *
|
||||
+ * Copyright (C) 2002 Jungo Software Technologies.
|
||||
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * Author: Copied from coyote-pci.c
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/irq.h>
|
||||
+
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/irq.h>
|
||||
+
|
||||
+#include <asm/mach/pci.h>
|
||||
+
|
||||
+extern void ixp4xx_pci_preinit(void);
|
||||
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
|
||||
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
|
||||
+
|
||||
+void __init pronghornmetro_pci_preinit(void)
|
||||
+{
|
||||
+ set_irq_type(IRQ_PCI_SLOT0, IRQT_LOW);
|
||||
+ set_irq_type(IRQ_PCI_SLOT1, IRQT_LOW);
|
||||
+ set_irq_type(IRQ_PCI_SLOT2, IRQT_LOW);
|
||||
+ set_irq_type(IRQ_PCI_SLOT3, IRQT_LOW);
|
||||
+
|
||||
+ ixp4xx_pci_preinit();
|
||||
+}
|
||||
+
|
||||
+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
+{
|
||||
+ if (slot == PCI_SLOT0_DEVID)
|
||||
+ return IRQ_PCI_SLOT0;
|
||||
+ else if (slot == PCI_SLOT1_DEVID)
|
||||
+ return IRQ_PCI_SLOT1;
|
||||
+ else if (slot == PCI_SLOT2_DEVID)
|
||||
+ return IRQ_PCI_SLOT2;
|
||||
+ else if (slot == PCI_SLOT3_DEVID)
|
||||
+ return IRQ_PCI_SLOT3;
|
||||
+ else return -1;
|
||||
+}
|
||||
+
|
||||
+struct hw_pci pronghornmetro_pci __initdata = {
|
||||
+ .nr_controllers = 1,
|
||||
+ .preinit = pronghornmetro_pci_preinit,
|
||||
+ .swizzle = pci_std_swizzle,
|
||||
+ .setup = ixp4xx_setup,
|
||||
+ .scan = ixp4xx_scan_bus,
|
||||
+ .map_irq = pronghornmetro_map_irq,
|
||||
+};
|
||||
+
|
||||
+int __init pronghornmetro_pci_init(void)
|
||||
+{
|
||||
+ if (machine_is_pronghorn_metro())
|
||||
+ pci_common_init(&pronghornmetro_pci);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+subsys_initcall(pronghornmetro_pci_init);
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-04-02 16:18:13.000000000 +0200
|
||||
@@ -0,0 +1,119 @@
|
||||
+/*
|
||||
+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
|
||||
+ *
|
||||
+ * Board setup for ADI Engineering Pronghorn Metro
|
||||
+ *
|
||||
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
||||
+ *
|
||||
+ * Author: Copied from coyote-setup.c
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/serial.h>
|
||||
+#include <linux/tty.h>
|
||||
+#include <linux/serial_8250.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#include <asm/types.h>
|
||||
+#include <asm/setup.h>
|
||||
+#include <asm/memory.h>
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/irq.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/flash.h>
|
||||
+
|
||||
+static struct flash_platform_data pronghornmetro_flash_data = {
|
||||
+ .map_name = "cfi_probe",
|
||||
+ .width = 2,
|
||||
+};
|
||||
+
|
||||
+static struct resource pronghornmetro_flash_resource = {
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device pronghornmetro_flash = {
|
||||
+ .name = "IXP4XX-Flash",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &pronghornmetro_flash_data,
|
||||
+ },
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &pronghornmetro_flash_resource,
|
||||
+};
|
||||
+
|
||||
+static struct resource pronghornmetro_uart_resource = {
|
||||
+ .start = IXP4XX_UART2_BASE_PHYS,
|
||||
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct ixp4xx_i2c_pins pronghornmetro_i2c_gpio_pins = {
|
||||
+ .sda_pin = PRONGHORNMETRO_SDA_PIN,
|
||||
+ .scl_pin = PRONGHORNMETRO_SCL_PIN,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device pronghornmetro_i2c_controller = {
|
||||
+ .name = "IXP4XX-I2C",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &pronghornmetro_i2c_gpio_pins,
|
||||
+ },
|
||||
+ .num_resources = 0
|
||||
+};
|
||||
+
|
||||
+static struct plat_serial8250_port pronghornmetro_uart_data[] = {
|
||||
+ {
|
||||
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||
+ .irq = IRQ_IXP4XX_UART2,
|
||||
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
+ .iotype = UPIO_MEM,
|
||||
+ .regshift = 2,
|
||||
+ .uartclk = IXP4XX_UART_XTAL,
|
||||
+ },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+static struct platform_device pronghornmetro_uart = {
|
||||
+ .name = "serial8250",
|
||||
+ .id = PLAT8250_DEV_PLATFORM,
|
||||
+ .dev = {
|
||||
+ .platform_data = pronghornmetro_uart_data,
|
||||
+ },
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &pronghornmetro_uart_resource,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device *pronghornmetro_devices[] __initdata = {
|
||||
+ &pronghornmetro_i2c_controller,
|
||||
+ &pronghornmetro_flash,
|
||||
+ &pronghornmetro_uart
|
||||
+};
|
||||
+
|
||||
+static void __init pronghornmetro_init(void)
|
||||
+{
|
||||
+ ixp4xx_sys_init();
|
||||
+
|
||||
+ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||
+ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
||||
+
|
||||
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
||||
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
||||
+
|
||||
+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_MACH_PRONGHORNMETRO
|
||||
+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
|
||||
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||
+ .map_io = ixp4xx_map_io,
|
||||
+ .init_irq = ixp4xx_init_irq,
|
||||
+ .timer = &ixp4xx_timer,
|
||||
+ .boot_params = 0x0100,
|
||||
+ .init_machine = pronghornmetro_init,
|
||||
+MACHINE_END
|
||||
+#endif
|
||||
diff -Nur linux-2.6.19.2/Documentation/arm/IXP4xx linux-2.6.19.2-owrt/Documentation/arm/IXP4xx
|
||||
--- linux-2.6.19.2/Documentation/arm/IXP4xx 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/Documentation/arm/IXP4xx 2007-04-02 16:11:12.000000000 +0200
|
||||
@@ -111,6 +111,9 @@
|
||||
the platform has two mini-PCI slots used for 802.11[bga] cards.
|
||||
Finally, there is an IDE port hanging off the expansion bus.
|
||||
|
||||
+ADI Engineering Pronghorn Metro Platform
|
||||
+http://www.adiengineering.com/productsPronghornMetro.html
|
||||
+
|
||||
Gateworks Avila Network Platform
|
||||
http://www.gateworks.com/avila_sbc.htm
|
||||
|
||||
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/hardware.h
|
||||
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/hardware.h 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/hardware.h 2007-04-02 16:11:12.000000000 +0200
|
||||
@@ -43,6 +43,7 @@
|
||||
/* Platform specific details */
|
||||
#include "ixdp425.h"
|
||||
#include "coyote.h"
|
||||
+#include "pronghornmetro.h"
|
||||
#include "prpmc1100.h"
|
||||
#include "nslu2.h"
|
||||
#include "nas100d.h"
|
||||
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/irqs.h
|
||||
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/irqs.h 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/irqs.h 2007-04-02 16:11:12.000000000 +0200
|
||||
@@ -94,6 +94,21 @@
|
||||
#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
|
||||
|
||||
/*
|
||||
+ * ADI Pronghorn Metro Board IRQs
|
||||
+ */
|
||||
+#if defined(CONFIG_MACH_PRONGHORNMETRO)
|
||||
+#define IRQ_PCI_SLOT0 IRQ_IXP4XX_GPIO4
|
||||
+#define IRQ_PCI_SLOT1 IRQ_IXP4XX_GPIO6
|
||||
+#define IRQ_PCI_SLOT2 IRQ_IXP4XX_GPIO11
|
||||
+#define IRQ_PCI_SLOT3 IRQ_IXP4XX_GPIO1
|
||||
+#define IRQ_IDE IRQ_IXP4XX_GPIO0
|
||||
+#elif defined (CONFIG_MACH_PRONGHORN)
|
||||
+#define IRQ_PCI_SLOT0 IRQ_IXP4XX_GPIO11
|
||||
+#define IRQ_PCI_SLOT1 IRQ_IXP4XX_GPIO6
|
||||
+#define IRQ_IDE IRQ_IXP4XX_GPIO0
|
||||
+#endif
|
||||
+
|
||||
+/*
|
||||
* NSLU2 board IRQs
|
||||
*/
|
||||
#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
|
||||
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/pronghornmetro.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/pronghornmetro.h
|
||||
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/pronghornmetro.h 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/pronghornmetro.h 2007-04-02 16:11:12.000000000 +0200
|
||||
@@ -0,0 +1,47 @@
|
||||
+/*
|
||||
+ * include/asm-arm/arch-ixp4xx/pronghornmetro.h
|
||||
+ *
|
||||
+ * ADI Engineering platform specific definitions
|
||||
+ *
|
||||
+ * Copyright 2004 (c) MontaVista, Software, Inc.
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without any
|
||||
+ * warranty of any kind, whether express or implied.
|
||||
+ */
|
||||
+
|
||||
+#ifndef __ASM_ARCH_HARDWARE_H__
|
||||
+#error "Do not include this directly, instead #include <asm/hardware.h>"
|
||||
+#endif
|
||||
+
|
||||
+#if defined(CONFIG_MACH_PRONGHORNMETRO)
|
||||
+#define PRONGHORNMETRO_SDA_PIN 9
|
||||
+#define PRONGHORNMETRO_SCL_PIN 10
|
||||
+
|
||||
+/* PCI controller GPIO to IRQ pin mappings */
|
||||
+#define PCI_SLOT0_PIN 1
|
||||
+#define PCI_SLOT1_PIN 11
|
||||
+#define PCI_SLOT2_PIN 6
|
||||
+#define PCI_SLOT3_PIN 4
|
||||
+
|
||||
+#define PCI_SLOT0_DEVID 13
|
||||
+#define PCI_SLOT1_DEVID 14
|
||||
+#define PCI_SLOT2_DEVID 15
|
||||
+#define PCI_SLOT3_DEVID 16
|
||||
+
|
||||
+#define TASKFILE_CS 3
|
||||
+#define TASKFILE_CS_REG IXP4XX_EXP_CS3
|
||||
+#define ALTSTAT_CS 4
|
||||
+
|
||||
+#elif defined(CONFIG_MACH_PRONGHORN)
|
||||
+/* PCI controller GPIO to IRQ pin mappings */
|
||||
+#define PCI_SLOT0_PIN 11
|
||||
+#define PCI_SLOT1_PIN 6
|
||||
+
|
||||
+#define PCI_SLOT0_DEVID 15
|
||||
+#define PCI_SLOT1_DEVID 14
|
||||
+
|
||||
+#define TASKFILE_CS 2
|
||||
+#define TASKFILE_CS_REG IXP4XX_EXP_CS2
|
||||
+#define ALTSTAT_CS 3
|
||||
+#endif
|
||||
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
|
||||
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:10:51.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:12:24.000000000 +0200
|
||||
@@ -40,7 +40,7 @@
|
||||
/*
|
||||
* Some boards are using UART2 as console
|
||||
*/
|
||||
- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
|
||||
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn() || machine_is_pronghorn_metro())
|
||||
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
|
||||
else
|
||||
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
|
||||
Loading…
Reference in New Issue