ar71xx: add common m25p80 device

SVN-Revision: 18817

target/linux/ar71xx/config-2.6.30

@@ -3,6 +3,7 @@ CONFIG_32BIT=y
 CONFIG_AG71XX=y
 CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
+CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y

target/linux/ar71xx/config-2.6.31

@@ -5,6 +5,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 # CONFIG_AR7 is not set
+CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y

target/linux/ar71xx/config-2.6.32

@@ -5,6 +5,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 # CONFIG_AR7 is not set
+CONFIG_AR71XX_DEV_M25P80=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y
 CONFIG_AR71XX_MACH_AW_NR580=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -4,6 +4,7 @@ menu "Atheros AR71xx machine selection"
 
 config AR71XX_MACH_AP81
 	bool "Atheros AP81 board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_AP83
@@ -12,10 +13,12 @@ config AR71XX_MACH_AP83
 
 config AR71XX_MACH_DIR_825_B1
 	bool "D-Link DIR-825 rev. B1 board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_PB42
 	bool "Atheros PB42 board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_PB44
@@ -24,6 +27,7 @@ config AR71XX_MACH_PB44
 
 config AR71XX_MACH_AW_NR580
 	bool "AzureWave AW-NR580 board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_GENERIC
@@ -33,14 +37,17 @@ config AR71XX_MACH_GENERIC
 config AR71XX_MACH_WP543
 	bool "Compex WP543/WPJ543 board support"
 	select MYLOADER
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_WRT160NL
 	bool "Linksys WRT160NL board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_WRT400N
 	bool "Linksys WRT400N board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_RB_4XX
@@ -49,40 +56,52 @@ config AR71XX_MACH_RB_4XX
 
 config AR71XX_MACH_WNDR3700
 	bool "NETGEAR WNDR3700 board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_WNR2000
 	bool "NETGEAR WNR2000 board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_MZK_W04NU
 	bool "Planex MZK-W04NU board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_MZK_W300NH
 	bool "Planex MZK-W300NH board support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_TL_WR741ND
 	bool "TP-LINK TL-WR741ND support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_TL_WR941ND
 	bool "TP-LINK TL-WR941ND support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_TL_WR1043ND
 	bool "TP-LINK TL-WR1043ND support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_TEW_632BRP
 	bool "TRENDnet TEW-632BRP support"
+	select AR71XX_DEV_M25P80
 	default y
 
 config AR71XX_MACH_UBNT
 	bool "Ubiquiti AR71xx based boards support"
+	select AR71XX_DEV_M25P80
 	default y
 
 endmenu
 
+config AR71XX_DEV_M25P80
+	def_bool n
+
 endif

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -13,6 +13,8 @@ obj-y	:= prom.o irq.o setup.o devices.o gpio.o ar71xx.o
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 obj-$(CONFIG_PCI)			+= pci.o
 
+obj-$(CONFIG_AR71XX_DEV_M25P80)		+= dev-m25p80.o
+
 obj-$(CONFIG_AR71XX_MACH_AP81)		+= mach-ap81.o
 obj-$(CONFIG_AR71XX_MACH_AP83)		+= mach-ap83.o
 obj-$(CONFIG_AR71XX_MACH_AW_NR580)	+= mach-aw-nr580.o

target/linux/ar71xx/files/arch/mips/ar71xx/dev-m25p80.c

@@ -0,0 +1,30 @@
+/*
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include "devices.h"
+#include "dev-m25p80.h"
+
+static struct spi_board_info ar71xx_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "m25p80",
+	}
+};
+
+void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata)
+{
+	ar71xx_spi_info[0].platform_data = pdata;
+	ar71xx_add_device_spi(NULL, ar71xx_spi_info,
+			      ARRAY_SIZE(ar71xx_spi_info));
+}

target/linux/ar71xx/files/arch/mips/ar71xx/dev-m25p80.h

@@ -0,0 +1,16 @@
+/*
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_M25P80_H
+#define _AR71XX_DEV_M25P80_H
+
+#include <linux/spi/flash.h>
+
+void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init;
+
+#endif /* _AR71XX_DEV_M25P80_H */

target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c

@@ -12,14 +12,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define AP81_GPIO_LED_STATUS	1
 #define AP81_GPIO_LED_AOSS	3
@@ -66,16 +65,6 @@ static struct flash_platform_data ap81_flash_data = {
 #endif
 };
 
-static struct spi_board_info ap81_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &ap81_flash_data,
-	}
-};
-
 static struct gpio_led ap81_leds_gpio[] __initdata = {
 	{
 		.name		= "ap81:green:status",
@@ -135,8 +124,7 @@ static void __init ap81_setup(void)
 
 	ar71xx_add_device_usb();
 
-	ar71xx_add_device_spi(NULL, ap81_spi_info,
+	ar71xx_add_device_m25p80(&ap81_flash_data);
-			      ARRAY_SIZE(ap81_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
 					ap81_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c

@@ -12,8 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -21,6 +19,7 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define AW_NR580_GPIO_LED_READY_RED	0
 #define AW_NR580_GPIO_LED_WLAN		1
@@ -33,15 +32,6 @@
 
 #define AW_NR580_BUTTONS_POLL_INTERVAL	20
 
-static struct spi_board_info aw_nr580_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-	}
-};
-
 static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
 	{
 		.name		= "aw-nr580:red:ready",
@@ -105,8 +95,7 @@ static void __init aw_nr580_setup(void)
 
 	ar71xx_pci_init(ARRAY_SIZE(aw_nr580_pci_irqs), aw_nr580_pci_irqs);
 
-	ar71xx_add_device_spi(NULL, aw_nr580_spi_info,
+	ar71xx_add_device_m25p80(NULL);
-					ARRAY_SIZE(aw_nr580_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
 					aw_nr580_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c

@@ -13,8 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 #include <linux/pci.h>
 #include <linux/ath9k_platform.h>
@@ -26,6 +24,7 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define DIR825B1_GPIO_LED_BLUE_USB		0
 #define DIR825B1_GPIO_LED_ORANGE_POWER		1
@@ -85,16 +84,6 @@ static struct flash_platform_data dir825b1_flash_data = {
 #endif
 };
 
-static struct spi_board_info dir825b1_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &dir825b1_flash_data,
-	}
-};
-
 static struct gpio_led dir825b1_leds_gpio[] __initdata = {
 	{
 		.name		= "dir825b1:blue:usb",
@@ -298,8 +287,7 @@ static void __init dir825b1_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
 
-	ar71xx_add_device_spi(NULL, dir825b1_spi_info,
+	ar71xx_add_device_m25p80(&dir825b1_flash_data);
-			      ARRAY_SIZE(dir825b1_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
 					dir825b1_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c

@@ -12,8 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -21,6 +19,7 @@
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define MZK_W300NH_GPIO_LED_STATUS	1
 #define MZK_W300NH_GPIO_LED_WPS		3
@@ -77,16 +76,6 @@ static struct flash_platform_data mzk_w300nh_flash_data = {
 #endif
 };
 
-static struct spi_board_info mzk_w300nh_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &mzk_w300nh_flash_data,
-	}
-};
-
 static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
 	{
 		.name		= "mzk-w300nh:green:status",
@@ -156,8 +145,7 @@ static void __init mzk_w300nh_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
 
-	ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
+	ar71xx_add_device_m25p80(&mzk_w300nh_flash_data);
-			      ARRAY_SIZE(mzk_w300nh_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
 				    mzk_w300nh_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb42.c

@@ -13,29 +13,19 @@
 #include <linux/bitops.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define PB42_BUTTONS_POLL_INTERVAL	20
 
 #define PB42_GPIO_BTN_SW4	8
 #define PB42_GPIO_BTN_SW5	3
 
-static struct spi_board_info pb42_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-	}
-};
-
 static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = {
 	{
 		.slot	= 0,
@@ -76,8 +66,7 @@ static struct gpio_button pb42_gpio_buttons[] __initdata = {
 
 static void __init pb42_init(void)
 {
-	ar71xx_add_device_spi(NULL, pb42_spi_info,
+	ar71xx_add_device_m25p80(NULL);
-				ARRAY_SIZE(pb42_spi_info));
 
 	ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK);
 

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c

@@ -12,15 +12,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
-
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define TEW_632BRP_GPIO_LED_STATUS	1
 #define TEW_632BRP_GPIO_LED_WPS		3
@@ -69,16 +67,6 @@ static struct flash_platform_data tew_632brp_flash_data = {
 #endif
 };
 
-static struct spi_board_info tew_632brp_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &tew_632brp_flash_data,
-	}
-};
-
 static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
 	{
 		.name		= "tew-632brp:green:status",
@@ -126,8 +114,7 @@ static void __init tew_632brp_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
 
-	ar71xx_add_device_spi(NULL, tew_632brp_spi_info,
+	ar71xx_add_device_m25p80(&tew_632brp_flash_data);
-					ARRAY_SIZE(tew_632brp_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
 					tew_632brp_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c

@@ -11,8 +11,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -20,6 +18,7 @@
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define TL_WR1043ND_GPIO_LED_SYSTEM     2
 #define TL_WR1043ND_GPIO_LED_QSS        5
@@ -64,16 +63,6 @@ static struct flash_platform_data tl_wr1043nd_flash_data = {
 #endif
 };
 
-static struct spi_board_info tl_wr1043nd_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &tl_wr1043nd_flash_data,
-	}
-};
-
 static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
 	{
 		.name		= "tl-wr1043nd:green:system",
@@ -121,8 +110,7 @@ static void __init tl_wr1043nd_setup(void)
 
 	ar71xx_add_device_usb();
 
-	ar71xx_add_device_spi(NULL, tl_wr1043nd_spi_info,
+	ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data);
-					ARRAY_SIZE(tl_wr1043nd_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
 					tl_wr1043nd_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c

@@ -12,8 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 #include <linux/ath9k_platform.h>
 
@@ -23,6 +21,7 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define TL_WR741ND_GPIO_LED_QSS		0
 #define TL_WR741ND_GPIO_LED_SYSTEM	1
@@ -67,16 +66,6 @@ static struct flash_platform_data tl_wr741nd_flash_data = {
 #endif
 };
 
-static struct spi_board_info tl_wr741nd_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &tl_wr741nd_flash_data,
-	}
-};
-
 static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
 	{
 		.name		= "tl-wr741nd:green:system",
@@ -167,8 +156,7 @@ static void __init tl_wr741nd_setup(void)
 	ar71xx_add_device_eth(1);
 	ar71xx_add_device_eth(0);
 
-	ar71xx_add_device_spi(NULL, tl_wr741nd_spi_info,
+	ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
-					ARRAY_SIZE(tl_wr741nd_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
 					tl_wr741nd_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c

@@ -11,8 +11,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -20,6 +18,7 @@
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define TL_WR941ND_GPIO_LED_SYSTEM	2
 #define TL_WR941ND_GPIO_LED_QSS		5
@@ -64,16 +63,6 @@ static struct flash_platform_data tl_wr941nd_flash_data = {
 #endif
 };
 
-static struct spi_board_info tl_wr941nd_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &tl_wr941nd_flash_data,
-	}
-};
-
 static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
 	{
 		.name		= "tl-wr941nd:green:system",
@@ -134,8 +123,7 @@ static void __init tl_wr941nd_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
 
-	ar71xx_add_device_spi(NULL, tl_wr941nd_spi_info,
+	ar71xx_add_device_m25p80(&tl_wr941nd_flash_data);
-					ARRAY_SIZE(tl_wr941nd_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
 					tl_wr941nd_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c

@@ -12,8 +12,6 @@
 
 #include <linux/pci.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 #include <linux/ath9k_platform.h>
 
@@ -22,6 +20,7 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define UBNT_RS_GPIO_LED_RF	2
 #define UBNT_RS_GPIO_SW4	8
@@ -42,15 +41,6 @@
 
 #define UBNT_BUTTONS_POLL_INTERVAL	20
 
-static struct spi_board_info ubnt_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-	}
-};
-
 static struct ar71xx_pci_irq ubnt_pci_irqs[] __initdata = {
 	{
 		.slot	= 0,
@@ -151,8 +141,7 @@ static struct gpio_button ubnt_m_gpio_buttons[] __initdata = {
 
 static void __init ubnt_generic_setup(void)
 {
-	ar71xx_add_device_spi(NULL, ubnt_spi_info,
+	ar71xx_add_device_m25p80(NULL);
-				    ARRAY_SIZE(ubnt_spi_info));
 
 	ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
 					ARRAY_SIZE(ubnt_gpio_buttons),
@@ -285,8 +274,7 @@ static void __init ubnt_m_setup(void)
 
 	ar71xx_set_mac_base(mac);
 
-	ar71xx_add_device_spi(NULL, ubnt_spi_info,
+	ar71xx_add_device_m25p80(NULL);
-				    ARRAY_SIZE(ubnt_spi_info));
 
 	ar71xx_add_device_mdio(~0);
 

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c

@@ -12,8 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 #include <linux/pci.h>
 #include <linux/ath9k_platform.h>
@@ -25,6 +23,7 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define WNDR3700_GPIO_LED_WPS_ORANGE	0
 #define WNDR3700_GPIO_LED_POWER_ORANGE	1
@@ -226,16 +225,6 @@ static void __init wndr3700_pci_init(void)
 static inline void wndr3700_pci_init(void) { };
 #endif /* CONFIG_PCI */
 
-static struct spi_board_info wndr3700_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &wndr3700_flash_data,
-	}
-};
-
 static struct gpio_led wndr3700_leds_gpio[] __initdata = {
 	{
 		.name		= "wndr3700:green:power",
@@ -314,8 +303,7 @@ static void __init wndr3700_setup(void)
 
 	ar71xx_add_device_usb();
 
-	ar71xx_add_device_spi(NULL, wndr3700_spi_info,
+	ar71xx_add_device_m25p80(&wndr3700_flash_data);
-			      ARRAY_SIZE(wndr3700_spi_info));
 
         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
 				    wndr3700_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c

@@ -13,8 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -22,6 +20,7 @@
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define WNR2000_GPIO_LED_PWR_GREEN	14
 #define WNR2000_GPIO_LED_PWR_AMBER	7
@@ -79,16 +78,6 @@ static struct flash_platform_data wnr2000_flash_data = {
 #endif
 };
 
-static struct spi_board_info wnr2000_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &wnr2000_flash_data,
-	}
-};
-
 static struct gpio_led wnr2000_leds_gpio[] __initdata = {
 	{
 		.name		= "wnr2000:green:power",
@@ -144,8 +133,7 @@ static void __init wnr2000_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
 
-	ar71xx_add_device_spi(NULL, wnr2000_spi_info,
+	ar71xx_add_device_m25p80(&wnr2000_flash_data);
-					ARRAY_SIZE(wnr2000_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
 					wnr2000_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c

@@ -12,8 +12,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
@@ -21,6 +19,7 @@
 #include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define WP543_GPIO_SW6		2
 #define WP543_GPIO_LED_1	3
@@ -32,15 +31,6 @@
 
 #define WP543_BUTTONS_POLL_INTERVAL	20
 
-static struct spi_board_info wp543_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-	}
-};
-
 static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
 	{
 		.slot	= 0,
@@ -99,7 +89,7 @@ static struct gpio_button wp543_gpio_buttons[] __initdata = {
 
 static void __init wp543_setup(void)
 {
-	ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
+	ar71xx_add_device_m25p80(NULL);
 
 	ar71xx_add_device_mdio(0xfffffff7);
 

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c

@@ -11,14 +11,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define WRT160NL_GPIO_LED_POWER		14
 #define WRT160NL_GPIO_LED_WPS_AMBER	9
@@ -70,16 +69,6 @@ static struct flash_platform_data wrt160nl_flash_data = {
 #endif
 };
 
-static struct spi_board_info wrt160nl_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &wrt160nl_flash_data,
-	}
-};
-
 static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
 	{
 		.name		= "wrt160nl:blue:power",
@@ -132,8 +121,7 @@ static void __init wrt160nl_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
 
-	ar71xx_add_device_spi(NULL, wrt160nl_spi_info,
+	ar71xx_add_device_m25p80(&wrt160nl_flash_data);
-			      ARRAY_SIZE(wrt160nl_spi_info));
 
 	ar71xx_add_device_usb();
 	ar91xx_add_device_wmac();

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt400n.c

@@ -12,14 +12,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
 
 #define WRT400N_GPIO_LED_ORANGE	5
 #define WRT400N_GPIO_LED_GREEN	4
@@ -86,16 +85,6 @@ static struct flash_platform_data wrt400n_flash_data = {
 #endif
 };
 
-static struct spi_board_info wrt400n_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data  = &wrt400n_flash_data,
-	}
-};
-
 static struct gpio_led wrt400n_leds_gpio[] __initdata = {
 	{
 		.name		= "wrt400n:green:status",
@@ -150,8 +139,7 @@ static void __init wrt400n_setup(void)
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
 
-	ar71xx_add_device_spi(NULL, wrt400n_spi_info,
+	ar71xx_add_device_m25p80(&wrt400n_flash_data);
-			      ARRAY_SIZE(wrt400n_spi_info));
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
 					wrt400n_leds_gpio);