mirror of https://github.com/hak5/openwrt-owl.git
u-boot-mvebu: update to 2018.03
This release brings various improvements to clearfog support, such as distro-boot. Obsoletes: 0002-clearfog-reset-usom-onboard-1512-phy.patch 0003-clearfog-enable-distro-boot-code.patch Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>openwrt-18.06
Josua Mayer
Hauke Mehrtens
parent
093e6c69fb
commit
dff904a955
|
|
@ -8,10 +8,10 @@
|
|||
include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/kernel.mk
|
||||
|
||||
PKG_VERSION:=2017.03
|
||||
PKG_VERSION:=2018.03
|
||||
PKG_RELEASE:=1
|
||||
|
||||
PKG_HASH:=f54baf3f9325bf444c7905f3a5b6f83680edb1e6e1a4d5f8a5ad80abe885113f
|
||||
PKG_HASH:=7e7477534409d5368eb1371ffde6820f0f79780a1a1f676161c48442cb303dfd
|
||||
|
||||
include $(INCLUDE_DIR)/u-boot.mk
|
||||
include $(INCLUDE_DIR)/package.mk
|
||||
|
|
|
|||
|
|
@ -1,37 +0,0 @@
|
|||
From 98848106b9558244ae36a85229caabcdb57d0f7b Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Gorski <jonas.gorski@gmail.com>
|
||||
Date: Fri, 23 Sep 2016 13:58:14 +0200
|
||||
Subject: [PATCH 2/4] clearfog: reset usom onboard 1512 phy
|
||||
|
||||
Use GPIO19 which is wired to the uSOM phy reset signal in order to reset
|
||||
the uSOM's 88E81512 gigabit Ethernet phy.
|
||||
|
||||
This GPIO is valid on ClearFog rev 2.1 and newer.
|
||||
|
||||
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
|
||||
[jonas.gorski: adapted to upstream u-boot code]
|
||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||
---
|
||||
board/solidrun/clearfog/clearfog.c | 4 ++++
|
||||
1 file changed, 4 insertions(+)
|
||||
|
||||
diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
|
||||
index 2773f5957e..3a8257cac3 100644
|
||||
--- a/board/solidrun/clearfog/clearfog.c
|
||||
+++ b/board/solidrun/clearfog/clearfog.c
|
||||
@@ -131,8 +131,12 @@ int board_init(void)
|
||||
/* Toggle GPIO41 to reset onboard switch and phy */
|
||||
clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
|
||||
clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9));
|
||||
+ /* GPIO 19 on ClearFog rev 2.1 controls the uSOM onboard phy reset */
|
||||
+ clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
|
||||
+ clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19));
|
||||
mdelay(1);
|
||||
setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
|
||||
+ setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
|
||||
mdelay(10);
|
||||
|
||||
/* Init I2C IO expanders */
|
||||
--
|
||||
2.12.2
|
||||
|
||||
|
|
@ -1,97 +0,0 @@
|
|||
From 9653921eadd5d5268afbee6c928708158fc4e844 Mon Sep 17 00:00:00 2001
|
||||
From: Josua Mayer <josua.mayer97@gmail.com>
|
||||
Date: Tue, 22 Nov 2016 16:33:23 +0100
|
||||
Subject: [PATCH 3/4] clearfog: enable distro boot code
|
||||
|
||||
load addresses start at 0x02000000, leaving enough space for fdt,
|
||||
boot scripts and ramdisk at the end.
|
||||
Only boot from mmc, the other options are not in working order.
|
||||
Removed *_high variables in good faith. They can be re-added with sane
|
||||
values when, and if required.
|
||||
|
||||
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
|
||||
---
|
||||
Kconfig | 1 +
|
||||
include/configs/clearfog.h | 47 +++++++++++++++++++++++++++++++++++++++++-----
|
||||
2 files changed, 43 insertions(+), 5 deletions(-)
|
||||
|
||||
diff --git a/Kconfig b/Kconfig
|
||||
index 81b4226463..f7aec2255b 100644
|
||||
--- a/Kconfig
|
||||
+++ b/Kconfig
|
||||
@@ -59,6 +59,7 @@ config DISTRO_DEFAULTS
|
||||
default y if ARCH_LS2080A
|
||||
default y if ARCH_MESON
|
||||
default y if ARCH_ROCKCHIP
|
||||
+ default y if TARGET_CLEARFOG
|
||||
default n
|
||||
select CMD_BOOTZ if ARM && !ARM64
|
||||
select CMD_BOOTI if ARM64
|
||||
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
|
||||
index 0c51d2a288..890dd84b5d 100644
|
||||
--- a/include/configs/clearfog.h
|
||||
+++ b/include/configs/clearfog.h
|
||||
@@ -79,11 +79,6 @@
|
||||
|
||||
#define CONFIG_SYS_ALT_MEMTEST
|
||||
|
||||
-/* Keep device tree and initrd in lower memory so the kernel can access them */
|
||||
-#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
- "fdt_high=0x10000000\0" \
|
||||
- "initrd_high=0x10000000\0"
|
||||
-
|
||||
/* SPL */
|
||||
/*
|
||||
* Select the boot device here
|
||||
@@ -128,6 +123,48 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
+#ifndef CONFIG_SPL_BUILD
|
||||
+/*
|
||||
+ * Add standard bootenv from distro boot code:
|
||||
+ * Keep device tree and initrd in lower memory so the kernel can access them
|
||||
+ * Set default load addresses:
|
||||
+ * - 63MiB space for kernel
|
||||
+ * - 1MiB space for fdt
|
||||
+ * - 1MiB space for extlinux file, or boot script
|
||||
+ * - remainder for ramdisk
|
||||
+ * Keep device tree and initrd in lower memory so the kernel can access them
|
||||
+ * Set name of fdt file (default to Clearfog Pro)
|
||||
+ * specify console device
|
||||
+ */
|
||||
+#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
+ "kernel_addr_r=0x02000000\0" \
|
||||
+ "fdt_addr_r=0x05f00000\0" \
|
||||
+ "pxefile_addr_r=0x06000000\0" \
|
||||
+ "scriptaddr=0x06000000\0" \
|
||||
+ "ramdisk_addr_r=0x06100000\0" \
|
||||
+ "fdt_high=0x10000000\0" \
|
||||
+ "initrd_high=0x10000000\0" \
|
||||
+ "fdtfile=armada-388-clearfog-pro.dtb\0" \
|
||||
+ "console=ttyS0," __stringify(CONFIG_BAUDRATE) "\0" \
|
||||
+ BOOTENV
|
||||
+
|
||||
+/* include distro boot code defaults */
|
||||
+#include <config_distro_defaults.h>
|
||||
+
|
||||
+/*
|
||||
+ * specify boot order
|
||||
+ * sdcard or emmc -> usb -> network
|
||||
+ */
|
||||
+#define BOOT_TARGET_DEVICES(func) \
|
||||
+ func(MMC, mmc, 0) \
|
||||
+ func(USB, usb, 0) \
|
||||
+ func(PXE, pxe, na) \
|
||||
+ func(DHCP, dhcp, na)
|
||||
+
|
||||
+/* include the actual distro boot code */
|
||||
+#include <config_distro_bootcmd.h>
|
||||
+#endif
|
||||
+
|
||||
/*
|
||||
* mv-common.h should be defined after CMD configs since it used them
|
||||
* to enable certain macros
|
||||
--
|
||||
2.12.2
|
||||
|
||||
Loading…
Reference in New Issue