mac80211: update to wireless-testing 2016-05-12

Signed-off-by: Felix Fietkau <nbd@nbd.name>
owl
Felix Fietkau 2016-05-14 17:38:56 +02:00
parent ace946152d
commit df93d53a4b
146 changed files with 1190 additions and 9915 deletions

View File

@ -1,8 +1,6 @@
diff --git a/main.c b/main.c
index bfec856..3c482d9 100644
--- a/main.c
+++ b/main.c
@@ -497,7 +497,7 @@ int acx_free_mechanics(acx_device_t *adev)
@@ -497,7 +497,7 @@ int acx_free_mechanics(acx_device_t *ade
int acx_init_ieee80211(acx_device_t *adev, struct ieee80211_hw *hw)
{
@ -11,7 +9,7 @@ index bfec856..3c482d9 100644
hw->queues = 1;
hw->wiphy->max_scan_ssids = 1;
@@ -525,7 +525,7 @@ int acx_init_ieee80211(acx_device_t *adev, struct ieee80211_hw *hw)
@@ -525,14 +525,14 @@ int acx_init_ieee80211(acx_device_t *ade
/* We base signal quality on winlevel approach of previous driver
* TODO OW 20100615 This should into a common init code
*/
@ -20,7 +18,16 @@ index bfec856..3c482d9 100644
hw->max_signal = 100;
if (IS_ACX100(adev)) {
@@ -945,8 +945,8 @@ void acx_op_configure_filter(struct ieee80211_hw *hw,
- adev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ adev->hw->wiphy->bands[NL80211_BAND_2GHZ] =
&acx100_band_2GHz;
} else if (IS_ACX111(adev))
- adev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ adev->hw->wiphy->bands[NL80211_BAND_2GHZ] =
&acx111_band_2GHz;
else {
log(L_ANY, "Error: Unknown device");
@@ -945,8 +945,8 @@ void acx_op_configure_filter(struct ieee
changed_flags, *total_flags);
/* OWI TODO: Set also FIF_PROBE_REQ ? */
@ -31,7 +38,7 @@ index bfec856..3c482d9 100644
logf1(L_DEBUG, "2: *total_flags=0x%08x\n", *total_flags);
@@ -1045,9 +1045,10 @@ void acx_op_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
@@ -1045,9 +1045,10 @@ void acx_op_tx(struct ieee80211_hw *hw,
}
int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@ -43,7 +50,7 @@ index bfec856..3c482d9 100644
struct sk_buff *skb;
size_t ssid_len = 0;
u8 *ssid = NULL;
@@ -1082,7 +1083,7 @@ int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -1082,7 +1083,7 @@ int acx_op_hw_scan(struct ieee80211_hw *
goto out;
}
#else
@ -52,11 +59,9 @@ index bfec856..3c482d9 100644
req->ie_len);
if (!skb) {
ret = -ENOMEM;
diff --git a/main.h b/main.h
index 293f5c8..84ecb9a 100644
--- a/main.h
+++ b/main.h
@@ -62,7 +62,7 @@ void acx_op_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
@@ -62,7 +62,7 @@ void acx_op_tx(struct ieee80211_hw *hw,
#endif
int acx_op_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@ -65,3 +70,14 @@ index 293f5c8..84ecb9a 100644
int acx_recover_hw(acx_device_t *adev);
--- a/cardsetting.c
+++ b/cardsetting.c
@@ -159,7 +159,7 @@ int acx_set_channel(acx_device_t *adev,
int res = 0;
adev->rx_status.freq = freq;
- adev->rx_status.band = IEEE80211_BAND_2GHZ;
+ adev->rx_status.band = NL80211_BAND_2GHZ;
adev->channel = channel;

View File

@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=2016-01-10
PKG_VERSION:=2016-05-12
PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_BACKPORT_VERSION:=
PKG_MD5SUM:=be5fae2e8d6f7490f9b073374fb895ba
PKG_MD5SUM:=2142cf38509896dca108624e7c193611
PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
@ -884,7 +884,7 @@ endef
define KernelPackage/lib80211
$(call KernelPackage/mac80211/Default)
TITLE:=802.11 Networking stack
DEPENDS:=+kmod-cfg80211
DEPENDS:=+kmod-cfg80211 +kmod-crypto-hash
FILES:= \
$(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \

View File

@ -1,21 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 28 Jan 2016 15:16:35 +0100
Subject: [PATCH] backports: add skb_free_frag()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/backport-include/linux/skbuff.h
+++ b/backport-include/linux/skbuff.h
@@ -300,4 +300,11 @@ int skb_ensure_writable(struct sk_buff *
#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0)
+static inline void skb_free_frag(void *data)
+{
+ put_page(virt_to_head_page(data));
+}
+#endif
+
#endif /* __BACKPORT_SKBUFF_H */

View File

@ -0,0 +1,21 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Sat, 14 May 2016 16:39:35 +0200
Subject: [PATCH] header: backport GENL_UNS_ADMIN_PERM
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
create mode 100644 backport-include/uapi/linux/genetlink.h
--- /dev/null
+++ b/backport-include/uapi/linux/genetlink.h
@@ -0,0 +1,10 @@
+#ifndef __COMPAT_UAPI_LINUX_GENETLINK_H
+#define __COMPAT_UAPI_LINUX_GENETLINK_H
+
+#include_next <uapi/linux/genetlink.h>
+
+#ifndef GENL_UNS_ADMIN_PERM
+#define GENL_UNS_ADMIN_PERM GENL_ADMIN_PERM
+#endif
+
+#endif

View File

@ -1,20 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 28 Jan 2016 15:19:22 +0100
Subject: [PATCH] backports: add napi_alloc_frag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/backport-include/linux/netdevice.h
+++ b/backport-include/linux/netdevice.h
@@ -232,6 +232,10 @@ static inline void backport_unregister_n
#define unregister_netdevice_many LINUX_BACKPORT(unregister_netdevice_many)
#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)
+#define napi_alloc_frag netdev_alloc_frag
+#endif
+
/*
* Complicated way of saying: We only backport netdev_rss_key stuff on kernels
* that either already have net_get_random_once() (>= 3.13) or where we've been

View File

@ -0,0 +1,158 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Sat, 14 May 2016 16:40:16 +0200
Subject: [PATCH] header: backport nla_put_u64_64bit and nla_put_64bit
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/backport-include/net/netlink.h
+++ b/backport-include/net/netlink.h
@@ -189,4 +189,148 @@ static inline __le64 nla_get_le64(const
}
#endif /* < 4.4 */
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
+
+/**
+ * nla_need_padding_for_64bit - test 64-bit alignment of the next attribute
+ * @skb: socket buffer the message is stored in
+ *
+ * Return true if padding is needed to align the next attribute (nla_data()) to
+ * a 64-bit aligned area.
+ */
+static inline bool nla_need_padding_for_64bit(struct sk_buff *skb)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ /* The nlattr header is 4 bytes in size, that's why we test
+ * if the skb->data _is_ aligned. A NOP attribute, plus
+ * nlattr header for next attribute, will make nla_data()
+ * 8-byte aligned.
+ */
+ if (IS_ALIGNED((unsigned long)skb_tail_pointer(skb), 8))
+ return true;
+#endif
+ return false;
+}
+
+/**
+ * nla_align_64bit - 64-bit align the nla_data() of next attribute
+ * @skb: socket buffer the message is stored in
+ * @padattr: attribute type for the padding
+ *
+ * Conditionally emit a padding netlink attribute in order to make
+ * the next attribute we emit have a 64-bit aligned nla_data() area.
+ * This will only be done in architectures which do not have
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS defined.
+ *
+ * Returns zero on success or a negative error code.
+ */
+static inline int nla_align_64bit(struct sk_buff *skb, int padattr)
+{
+ if (nla_need_padding_for_64bit(skb) &&
+ !nla_reserve(skb, padattr, 0))
+ return -EMSGSIZE;
+
+ return 0;
+}
+
+/**
+ * __nla_reserve_64bit - reserve room for attribute on the skb and align it
+ * @skb: socket buffer to reserve room on
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @padattr: attribute type for the padding
+ *
+ * Adds a netlink attribute header to a socket buffer and reserves
+ * room for the payload but does not copy it. It also ensure that this
+ * attribute will have a 64-bit aligned nla_data() area.
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute header and payload.
+ */
+static inline struct nlattr *__nla_reserve_64bit(struct sk_buff *skb, int attrtype,
+ int attrlen, int padattr)
+{
+ if (nla_need_padding_for_64bit(skb))
+ nla_align_64bit(skb, padattr);
+
+ return __nla_reserve(skb, attrtype, attrlen);
+}
+
+/**
+ * __nla_put_64bit - Add a netlink attribute to a socket buffer and align it
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ * @padattr: attribute type for the padding
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute header and payload.
+ */
+static inline void __nla_put_64bit(struct sk_buff *skb, int attrtype, int attrlen,
+ const void *data, int padattr)
+{
+ struct nlattr *nla;
+
+ nla = __nla_reserve_64bit(skb, attrtype, attrlen, padattr);
+ memcpy(nla_data(nla), data, attrlen);
+}
+
+/**
+ * nla_total_size_64bit - total length of attribute including padding
+ * @payload: length of payload
+ */
+static inline int nla_total_size_64bit(int payload)
+{
+ return NLA_ALIGN(nla_attr_size(payload))
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ + NLA_ALIGN(nla_attr_size(0))
+#endif
+ ;
+}
+
+/**
+ * nla_put_64bit - Add a netlink attribute to a socket buffer and align it
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ * @padattr: attribute type for the padding
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute header and payload.
+ */
+static inline int nla_put_64bit(struct sk_buff *skb, int attrtype, int attrlen,
+ const void *data, int padattr)
+{
+ size_t len;
+
+ if (nla_need_padding_for_64bit(skb))
+ len = nla_total_size_64bit(attrlen);
+ else
+ len = nla_total_size(attrlen);
+ if (unlikely(skb_tailroom(skb) < len))
+ return -EMSGSIZE;
+
+ __nla_put_64bit(skb, attrtype, attrlen, data, padattr);
+ return 0;
+}
+
+/**
+ * nla_put_u64_64bit - Add a u64 netlink attribute to a skb and align it
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @value: numeric value
+ * @padattr: attribute type for the padding
+ */
+static inline int nla_put_u64_64bit(struct sk_buff *skb, int attrtype,
+ u64 value, int padattr)
+{
+ return nla_put_64bit(skb, attrtype, sizeof(u64), &value, padattr);
+}
+
+
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) */
+
#endif /* __BACKPORT_NET_NETLINK_H */

View File

@ -0,0 +1,18 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Sat, 14 May 2016 16:44:57 +0200
Subject: [PATCH] compat: bump rhashtable backport version due to API changes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/compat/Kconfig
+++ b/compat/Kconfig
@@ -139,7 +139,7 @@ config BPAUTO_BUILD_WANT_DEV_COREDUMP
config BPAUTO_RHASHTABLE
bool
# current API of rhashtable was introduced in version 4.1
- depends on KERNEL_4_1
+ depends on KERNEL_4_7
# not very nice - but better than always having it
default y if MAC80211
#h-file linux/rhashtable.h

View File

@ -1,6 +1,6 @@
--- a/.local-symbols
+++ b/.local-symbols
@@ -476,44 +476,6 @@ USB_IPHETH=
@@ -481,45 +481,6 @@ USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
USB_NET_CH9200=
@ -37,6 +37,7 @@
-BCMA_DRIVER_PCI=
-BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_DRIVER_MIPS=
-BCMA_PFLASH=
-BCMA_SFLASH=
-BCMA_NFLASH=
-BCMA_DRIVER_GMAC_CMN=
@ -56,7 +57,7 @@
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct
@@ -4901,7 +4901,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */

View File

@ -1,20 +0,0 @@
--- a/compat/compat-3.6.c
+++ b/compat/compat-3.6.c
@@ -147,17 +147,3 @@ int sg_alloc_table_from_pages(struct sg_
return 0;
}
EXPORT_SYMBOL_GPL(sg_alloc_table_from_pages);
-
-/* whoopsie ! */
-#ifndef CONFIG_COMMON_CLK
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-#endif

View File

@ -34,12 +34,9 @@
#include "aes_ccm.h"
-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad,
- u8 *data, size_t data_len, u8 *mic,
- size_t mic_len)
+static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, u8 *s_0,
+ u8 *a, u8 *b)
{
- struct scatterlist sg[3];
+{
+ int i;
+
+ crypto_cipher_encrypt_one(tfm, b, b_0);
@ -54,55 +51,56 @@
+ for (i = 0; i < AES_BLOCK_SIZE; i++)
+ aad[i] ^= b[i];
+ crypto_cipher_encrypt_one(tfm, a, aad);
- char aead_req_data[sizeof(struct aead_request) +
- crypto_aead_reqsize(tfm)]
- __aligned(__alignof__(struct aead_request));
- struct aead_request *aead_req = (void *) aead_req_data;
+
+ /* Mask out bits from auth-only-b_0 */
+ b_0[0] &= 0x07;
- memset(aead_req, 0, sizeof(aead_req_data));
+
+ /* S_0 is used to encrypt T (= MIC) */
+ b_0[14] = 0;
+ b_0[15] = 0;
+ crypto_cipher_encrypt_one(tfm, s_0, b_0);
+}
- sg_init_table(sg, 3);
- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
- sg_set_buf(&sg[1], data, data_len);
- sg_set_buf(&sg[2], mic, mic_len);
- aead_request_set_tfm(aead_req, tfm);
- aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
- aead_request_set_ad(aead_req, sg[0].length);
+
+
+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad,
+ u8 *data, size_t data_len, u8 *mic,
+ size_t mic_len)
+{
u8 *data, size_t data_len, u8 *mic,
size_t mic_len)
{
- struct scatterlist sg[3];
+ int i, j, last_len, num_blocks;
+ u8 b[AES_BLOCK_SIZE];
+ u8 s_0[AES_BLOCK_SIZE];
+ u8 e[AES_BLOCK_SIZE];
+ u8 *pos, *cpos;
+
- char aead_req_data[sizeof(struct aead_request) +
- crypto_aead_reqsize(tfm)]
- __aligned(__alignof__(struct aead_request));
- struct aead_request *aead_req = (void *) aead_req_data;
+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
+ last_len = data_len % AES_BLOCK_SIZE;
+ aes_ccm_prepare(tfm, b_0, aad, s_0, b, b);
+
- memset(aead_req, 0, sizeof(aead_req_data));
+ /* Process payload blocks */
+ pos = data;
+ cpos = data;
+ for (j = 1; j <= num_blocks; j++) {
+ int blen = (j == num_blocks && last_len) ?
+ last_len : AES_BLOCK_SIZE;
+
- sg_init_table(sg, 3);
- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
- sg_set_buf(&sg[1], data, data_len);
- sg_set_buf(&sg[2], mic, mic_len);
+ /* Authentication followed by encryption */
+ for (i = 0; i < blen; i++)
+ b[i] ^= pos[i];
+ crypto_cipher_encrypt_one(tfm, b, b);
+
- aead_request_set_tfm(aead_req, tfm);
- aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
- aead_request_set_ad(aead_req, sg[0].length);
+ b_0[14] = (j >> 8) & 0xff;
+ b_0[15] = j & 0xff;
+ crypto_cipher_encrypt_one(tfm, e, b_0);
@ -125,37 +123,30 @@
- crypto_aead_reqsize(tfm)]
- __aligned(__alignof__(struct aead_request));
- struct aead_request *aead_req = (void *) aead_req_data;
-
- if (data_len == 0)
- return -EINVAL;
-
- memset(aead_req, 0, sizeof(aead_req_data));
-
- sg_init_table(sg, 3);
- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
- sg_set_buf(&sg[1], data, data_len);
- sg_set_buf(&sg[2], mic, mic_len);
-
- aead_request_set_tfm(aead_req, tfm);
- aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0);
- aead_request_set_ad(aead_req, sg[0].length);
+ int i, j, last_len, num_blocks;
+ u8 *pos, *cpos;
+ u8 a[AES_BLOCK_SIZE];
+ u8 b[AES_BLOCK_SIZE];
+ u8 s_0[AES_BLOCK_SIZE];
+
- if (data_len == 0)
- return -EINVAL;
+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE);
+ last_len = data_len % AES_BLOCK_SIZE;
+ aes_ccm_prepare(tfm, b_0, aad, s_0, a, b);
+
- memset(aead_req, 0, sizeof(aead_req_data));
+ /* Process payload blocks */
+ cpos = data;
+ pos = data;
+ for (j = 1; j <= num_blocks; j++) {
+ int blen = (j == num_blocks && last_len) ?
+ last_len : AES_BLOCK_SIZE;
+
- sg_init_table(sg, 3);
- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad));
- sg_set_buf(&sg[1], data, data_len);
- sg_set_buf(&sg[2], mic, mic_len);
+ /* Decryption followed by authentication */
+ b_0[14] = (j >> 8) & 0xff;
+ b_0[15] = j & 0xff;
@ -166,7 +157,10 @@
+ }
+ crypto_cipher_encrypt_one(tfm, a, a);
+ }
+
- aead_request_set_tfm(aead_req, tfm);
- aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0);
- aead_request_set_ad(aead_req, sg[0].length);
+ for (i = 0; i < mic_len; i++) {
+ if ((mic[i] ^ s_0[i]) != a[i])
+ return -1;
@ -185,12 +179,12 @@
{
- struct crypto_aead *tfm;
- int err;
+ struct crypto_cipher *tfm;
-
- tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR(tfm))
- return tfm;
-
+ struct crypto_cipher *tfm;
- err = crypto_aead_setkey(tfm, key, key_len);
- if (err)
- goto free_aead;
@ -309,7 +303,7 @@
#endif /* AES_GMAC_H */
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -84,7 +84,7 @@ struct ieee80211_key {
@@ -88,7 +88,7 @@ struct ieee80211_key {
* Management frames.
*/
u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
@ -320,7 +314,7 @@
struct {
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -307,7 +307,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
@@ -304,7 +304,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
}
@ -330,7 +324,7 @@
{
__le16 mask_fc;
int a4_included, mgmt;
@@ -337,14 +338,8 @@ static void ccmp_special_blocks(struct s
@@ -334,14 +335,8 @@ static void ccmp_special_blocks(struct s
else
qos_tid = 0;
@ -347,7 +341,7 @@
/* Nonce: Nonce Flags | A2 | PN
* Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
@@ -352,6 +347,8 @@ static void ccmp_special_blocks(struct s
@@ -349,6 +344,8 @@ static void ccmp_special_blocks(struct s
b_0[1] = qos_tid | (mgmt << 4);
memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
@ -356,7 +350,7 @@
/* AAD (extra authenticate-only data) / masked 802.11 header
* FC | A1 | A2 | A3 | SC | [A4] | [QC] */
@@ -463,7 +460,7 @@ static int ccmp_encrypt_skb(struct ieee8
@@ -460,7 +457,7 @@ static int ccmp_encrypt_skb(struct ieee8
return 0;
pos += IEEE80211_CCMP_HDR_LEN;
@ -365,7 +359,7 @@
ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len,
skb_put(skb, mic_len), mic_len);
@@ -534,7 +531,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
@@ -537,7 +534,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
u8 aad[2 * AES_BLOCK_SIZE];
u8 b_0[AES_BLOCK_SIZE];
/* hardware didn't decrypt/verify MIC */

View File

@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -846,7 +846,6 @@ static int ieee80211_stop_ap(struct wiph
@@ -850,7 +850,6 @@ static int ieee80211_stop_ap(struct wiph
sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
__sta_info_flush(sdata, true);

View File

@ -18,7 +18,7 @@
static int ieee80211_ifa6_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
@@ -1087,14 +1087,14 @@ int ieee80211_register_hw(struct ieee802
@@ -1089,14 +1089,14 @@ int ieee80211_register_hw(struct ieee802
rtnl_unlock();
@ -35,7 +35,7 @@
local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
result = register_inet6addr_notifier(&local->ifa6_notifier);
if (result)
@@ -1103,13 +1103,13 @@ int ieee80211_register_hw(struct ieee802
@@ -1105,13 +1105,13 @@ int ieee80211_register_hw(struct ieee802
return 0;
@ -52,7 +52,7 @@
fail_ifa:
#endif
rtnl_lock();
@@ -1137,10 +1137,10 @@ void ieee80211_unregister_hw(struct ieee
@@ -1139,10 +1139,10 @@ void ieee80211_unregister_hw(struct ieee
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);

View File

@ -1,6 +1,6 @@
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1999,7 +1999,7 @@ static int ieee80211_scan(struct wiphy *
@@ -2008,7 +2008,7 @@ static int ieee80211_scan(struct wiphy *
* the frames sent while scanning on other channel will be
* lost)
*/

View File

@ -0,0 +1,37 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Sat, 14 May 2016 14:51:02 +0200
Subject: [PATCH] Revert "ath9k: interpret requested txpower in EIRP
domain"
This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
---
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2914,7 +2914,8 @@ void ath9k_hw_apply_txpower(struct ath_h
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
struct ieee80211_channel *channel;
- int chan_pwr, new_pwr;
+ int chan_pwr, new_pwr, max_gain;
+ int ant_gain, ant_reduction = 0;
if (!chan)
return;
@@ -2922,10 +2923,15 @@ void ath9k_hw_apply_txpower(struct ath_h
channel = chan->chan;
chan_pwr = min_t(int, channel->max_power * 2, MAX_RATE_POWER);
new_pwr = min_t(int, chan_pwr, reg->power_limit);
+ max_gain = chan_pwr - new_pwr + channel->max_antenna_gain * 2;
+
+ ant_gain = get_antenna_gain(ah, chan);
+ if (ant_gain > max_gain)
+ ant_reduction = ant_gain - max_gain;
ah->eep_ops->set_txpower(ah, chan,
ath9k_regd_get_ctl(reg, chan),
- get_antenna_gain(ah, chan), new_pwr, test);
+ ant_reduction, new_pwr, test);
}
void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test)

View File

@ -1,95 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 14 Jan 2016 03:14:03 +0100
Subject: [PATCH] ath9k_hw: add low power tx gain table for AR953x
Used in some newer TP-Link AR9533 devices.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -698,6 +698,9 @@ static void ar9003_tx_gain_table_mode2(s
else if (AR_SREV_9340(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9340Modes_low_ob_db_tx_gain_table_1p0);
+ else if (AR_SREV_9531_11(ah))
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ qca953x_1p1_modes_no_xpa_low_power_tx_gain_table);
else if (AR_SREV_9485_11_OR_LATER(ah))
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_low_ob_db_tx_gain_1_1);
--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
@@ -757,6 +757,71 @@ static const u32 qca953x_1p1_modes_xpa_t
{0x00016448, 0x6c927a70},
};
+static const u32 qca953x_1p1_modes_no_xpa_low_power_tx_gain_table[][2] = {
+ /* Addr allmodes */
+ {0x0000a2dc, 0xfff55592},
+ {0x0000a2e0, 0xfff99924},
+ {0x0000a2e4, 0xfffe1e00},
+ {0x0000a2e8, 0xffffe000},
+ {0x0000a410, 0x000050d6},
+ {0x0000a500, 0x00000069},
+ {0x0000a504, 0x0400006b},
+ {0x0000a508, 0x0800006d},
+ {0x0000a50c, 0x0c000269},
+ {0x0000a510, 0x1000026b},
+ {0x0000a514, 0x1400026d},
+ {0x0000a518, 0x18000669},
+ {0x0000a51c, 0x1c00066b},
+ {0x0000a520, 0x1d000a68},
+ {0x0000a524, 0x21000a6a},
+ {0x0000a528, 0x25000a6c},
+ {0x0000a52c, 0x29000a6e},
+ {0x0000a530, 0x2d0012a9},
+ {0x0000a534, 0x310012ab},
+ {0x0000a538, 0x350012ad},
+ {0x0000a53c, 0x39001b0a},
+ {0x0000a540, 0x3d001b0c},
+ {0x0000a544, 0x41001b0e},
+ {0x0000a548, 0x43001bae},
+ {0x0000a54c, 0x45001914},
+ {0x0000a550, 0x47001916},
+ {0x0000a554, 0x49001b96},
+ {0x0000a558, 0x49001b96},
+ {0x0000a55c, 0x49001b96},
+ {0x0000a560, 0x49001b96},
+ {0x0000a564, 0x49001b96},
+ {0x0000a568, 0x49001b96},
+ {0x0000a56c, 0x49001b96},
+ {0x0000a570, 0x49001b96},
+ {0x0000a574, 0x49001b96},
+ {0x0000a578, 0x49001b96},
+ {0x0000a57c, 0x49001b96},
+ {0x0000a600, 0x00000000},
+ {0x0000a604, 0x00000000},
+ {0x0000a608, 0x00000000},
+ {0x0000a60c, 0x00000000},
+ {0x0000a610, 0x00000000},
+ {0x0000a614, 0x00000000},
+ {0x0000a618, 0x00804201},
+ {0x0000a61c, 0x01408201},
+ {0x0000a620, 0x01408502},
+ {0x0000a624, 0x01408502},
+ {0x0000a628, 0x01408502},
+ {0x0000a62c, 0x01408502},
+ {0x0000a630, 0x01408502},
+ {0x0000a634, 0x01408502},
+ {0x0000a638, 0x01408502},
+ {0x0000a63c, 0x01408502},
+ {0x0000b2dc, 0xfff55592},
+ {0x0000b2e0, 0xfff99924},
+ {0x0000b2e4, 0xfffe1e00},
+ {0x0000b2e8, 0xffffe000},
+ {0x00016044, 0x044922db},
+ {0x00016048, 0x6c927a70},
+ {0x00016444, 0x044922db},
+ {0x00016448, 0x6c927a70},
+};
+
static const u32 qca953x_2p0_baseband_core[][2] = {
/* Addr allmodes */
{0x00009800, 0xafe68e30},

View File

@ -0,0 +1,146 @@
From: Bob Copeland <me@bobcopeland.com>
Date: Sun, 15 May 2016 13:19:16 -0400
Subject: [PATCH] mac80211: mesh: flush mesh paths unconditionally
Currently, the mesh paths associated with a nexthop station are cleaned
up in the following code path:
__sta_info_destroy_part1
synchronize_net()
__sta_info_destroy_part2
-> cleanup_single_sta
-> mesh_sta_cleanup
-> mesh_plink_deactivate
-> mesh_path_flush_by_nexthop
However, there are a couple of problems here:
1) the paths aren't flushed at all if the MPM is running in userspace
(e.g. when using wpa_supplicant or authsae)
2) there is no synchronize_rcu between removing the path and readers
accessing the nexthop, which means the following race is possible:
CPU0 CPU1
~~~~ ~~~~
sta_info_destroy_part1()
synchronize_net()
rcu_read_lock()
mesh_nexthop_resolve()
mpath = mesh_path_lookup()
[...] -> mesh_path_flush_by_nexthop()
sta = rcu_dereference(
mpath->next_hop)
kfree(sta)
access sta <-- CRASH
Fix both of these by unconditionally flushing paths before destroying
the sta, and by adding a synchronize_net() after path flush to ensure
no active readers can still dereference the sta.
Fixes this crash:
[ 348.529295] BUG: unable to handle kernel paging request at 00020040
[ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[ 348.530014] *pde = 00000000
[ 348.530014] Oops: 0000 [#1] PREEMPT
[ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ]
[ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1
[ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014
[ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000
[ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0
[ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008
[ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40
[ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690
[ 348.530014] Stack:
[ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0
[ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320
[ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1
[ 348.530014] Call Trace:
[ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211]
[ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211]
[ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211]
[ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211]
[ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3
[ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b
[ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4]
[ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat]
[ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a
[ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211]
[ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253
[ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv]
[ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv]
[ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv]
[ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv]
[ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv]
[ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv]
[ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253
[ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb]
[ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge]
[ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge]
[ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge]
[ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge]
[ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge]
[ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge]
[ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge]
[ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge]
[ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge]
[ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b
[ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge]
[ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge]
[ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b
[ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge]
[ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37
[ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe
[ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc
[ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55
[ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a
[ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94
[ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb]
[ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26
[ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250
[ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163
[ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19
[ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c
[ 348.530014] <IRQ>
[ 348.530014] [<c022a957>] irq_exit+0x31/0x6f
[ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0
[ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40
[ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005
[ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40
[ 348.530014] CR2: 0000000000020040
[ 348.530014] ---[ end trace 48556ac26779732e ]---
[ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt
[ 348.530014] Kernel Offset: disabled
Cc: stable@vger.kernel.org
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Tested-by: Fred Veldini <fred.veldini@gmail.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -161,6 +161,10 @@ void mesh_sta_cleanup(struct sta_info *s
del_timer_sync(&sta->mesh->plink_timer);
}
+ /* make sure no readers can access nexthop sta from here on */
+ mesh_path_flush_by_nexthop(sta);
+ synchronize_net();
+
if (changed)
ieee80211_mbss_info_change_notify(sdata, changed);
}

View File

@ -1,156 +0,0 @@
From: Eli Cooper <elicooper@gmx.com>
Date: Thu, 14 Jan 2016 00:07:12 +0800
Subject: [PATCH] rt2x00: fix monitor mode regression
Since commit df1404650ccbfeb76a84f301f22316be0d00a864 monitor mode for rt2x00
has been made effectively useless because the hardware filter is configured to
drop packets whose intended recipient is not the device, regardless of the
presence of monitor mode interfaces.
This patch fixes this regression by adding explicit monitor mode support, and
configuring the hardware filter accordingly.
Signed-off-by: Eli Cooper <elicooper@gmx.com>
---
--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
@@ -273,8 +273,10 @@ static void rt2400pci_config_filter(stru
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
!(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
+ !rt2x00dev->is_monitoring);
rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
+ !rt2x00dev->is_monitoring &&
!rt2x00dev->intf_ap_count);
rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg);
--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
@@ -274,8 +274,10 @@ static void rt2500pci_config_filter(stru
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
!(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
+ !rt2x00dev->is_monitoring);
rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
+ !rt2x00dev->is_monitoring &&
!rt2x00dev->intf_ap_count);
rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
--- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
@@ -437,8 +437,10 @@ static void rt2500usb_config_filter(stru
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
!(filter_flags & FIF_CONTROL));
- rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME,
+ !rt2x00dev->is_monitoring);
rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
+ !rt2x00dev->is_monitoring &&
!rt2x00dev->intf_ap_count);
rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1490,7 +1490,8 @@ void rt2800_config_filter(struct rt2x00_
!(filter_flags & FIF_FCSFAIL));
rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
!(filter_flags & FIF_PLCPFAIL));
- rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+ !rt2x00dev->is_monitoring);
rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -844,11 +844,13 @@ struct rt2x00_dev {
* - Open sta interface count.
* - Association count.
* - Beaconing enabled count.
+ * - Whether the device is monitoring.
*/
unsigned int intf_ap_count;
unsigned int intf_sta_count;
unsigned int intf_associated;
unsigned int intf_beaconing;
+ bool is_monitoring;
/*
* Interface combinations
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00config.c
@@ -244,6 +244,16 @@ void rt2x00lib_config(struct rt2x00_dev
(ieee80211_flags & IEEE80211_CONF_CHANGE_PS))
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ if (ieee80211_flags & IEEE80211_CONF_CHANGE_MONITOR) {
+ if (conf->flags & IEEE80211_CONF_MONITOR) {
+ rt2x00_dbg(rt2x00dev, "Monitor mode is enabled\n");
+ rt2x00dev->is_monitoring = true;
+ } else {
+ rt2x00_dbg(rt2x00dev, "Monitor mode is disabled\n");
+ rt2x00dev->is_monitoring = false;
+ }
+ }
+
/*
* Start configuration.
*/
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1204,6 +1204,7 @@ int rt2x00lib_start(struct rt2x00_dev *r
rt2x00dev->intf_ap_count = 0;
rt2x00dev->intf_sta_count = 0;
rt2x00dev->intf_associated = 0;
+ rt2x00dev->is_monitoring = false;
/* Enable the radio */
retval = rt2x00lib_enable_radio(rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
@@ -385,11 +385,6 @@ void rt2x00mac_configure_filter(struct i
*total_flags |= FIF_PSPOLL;
}
- /*
- * Check if there is any work left for us.
- */
- if (rt2x00dev->packet_filter == *total_flags)
- return;
rt2x00dev->packet_filter = *total_flags;
rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
@@ -530,8 +530,10 @@ static void rt61pci_config_filter(struct
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
!(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
+ !rt2x00dev->is_monitoring);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
+ !rt2x00dev->is_monitoring &&
!rt2x00dev->intf_ap_count);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
@@ -480,8 +480,10 @@ static void rt73usb_config_filter(struct
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
!(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
- rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
+ !rt2x00dev->is_monitoring);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
+ !rt2x00dev->is_monitoring &&
!rt2x00dev->intf_ap_count);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,

View File

@ -1,32 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 15 Jan 2016 18:17:17 +0800
Subject: [PATCH] ath9k: avoid ANI restart if no trigger
Fixes commit 54da20d83f0e ("ath9k_hw: improve ANI processing and rx desensitizing parameters")
Call ath9k_ani_restart() only when the phy error rate reach the
ANI immunity threshold. Sync the logic with internal code base.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -444,14 +444,16 @@ void ath9k_hw_ani_monitor(struct ath_hw
ofdmPhyErrRate < ah->config.ofdm_trig_low) {
ath9k_hw_ani_lower_immunity(ah);
aniState->ofdmsTurn = !aniState->ofdmsTurn;
+ ath9k_ani_restart(ah);
} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
ath9k_hw_ani_ofdm_err_trigger(ah);
aniState->ofdmsTurn = false;
+ ath9k_ani_restart(ah);
} else if (cckPhyErrRate > ah->config.cck_trig_high) {
ath9k_hw_ani_cck_err_trigger(ah);
aniState->ofdmsTurn = true;
+ ath9k_ani_restart(ah);
}
- ath9k_ani_restart(ah);
}
}
EXPORT_SYMBOL(ath9k_hw_ani_monitor);

View File

@ -1,91 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 15 Jan 2016 18:17:18 +0800
Subject: [PATCH] ath9k: clean up ANI per-channel pointer checking
commit c24bd3620c50 ("ath9k: Do not maintain ANI state per-channel")
removed per-channel handling, the code to check 'curchan' also
should be removed as never used.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -126,12 +126,8 @@ static void ath9k_hw_update_mibstats(str
static void ath9k_ani_restart(struct ath_hw *ah)
{
- struct ar5416AniState *aniState;
-
- if (!ah->curchan)
- return;
+ struct ar5416AniState *aniState = &ah->ani;
- aniState = &ah->ani;
aniState->listenTime = 0;
ENABLE_REGWRITE_BUFFER(ah);
@@ -221,12 +217,7 @@ static void ath9k_hw_set_ofdm_nil(struct
static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
{
- struct ar5416AniState *aniState;
-
- if (!ah->curchan)
- return;
-
- aniState = &ah->ani;
+ struct ar5416AniState *aniState = &ah->ani;
if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL)
ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false);
@@ -281,12 +272,7 @@ static void ath9k_hw_set_cck_nil(struct
static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
{
- struct ar5416AniState *aniState;
-
- if (!ah->curchan)
- return;
-
- aniState = &ah->ani;
+ struct ar5416AniState *aniState = &ah->ani;
if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL)
ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1,
@@ -299,9 +285,7 @@ static void ath9k_hw_ani_cck_err_trigger
*/
static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
{
- struct ar5416AniState *aniState;
-
- aniState = &ah->ani;
+ struct ar5416AniState *aniState = &ah->ani;
/* lower OFDM noise immunity */
if (aniState->ofdmNoiseImmunityLevel > 0 &&
@@ -329,7 +313,7 @@ void ath9k_ani_reset(struct ath_hw *ah,
struct ath_common *common = ath9k_hw_common(ah);
int ofdm_nil, cck_nil;
- if (!ah->curchan)
+ if (!chan)
return;
BUG_ON(aniState == NULL);
@@ -416,14 +400,10 @@ static bool ath9k_hw_ani_read_counters(s
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
{
- struct ar5416AniState *aniState;
+ struct ar5416AniState *aniState = &ah->ani;
struct ath_common *common = ath9k_hw_common(ah);
u32 ofdmPhyErrRate, cckPhyErrRate;
- if (!ah->curchan)
- return;
-
- aniState = &ah->ani;
if (!ath9k_hw_ani_read_counters(ah))
return;

View File

@ -1,31 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 15 Jan 2016 18:17:19 +0800
Subject: [PATCH] ath9k: do not reset while BB panic(0x4000409) on ar9561
BB panic(0x4000409) observed while AP enabling/disabling
bursting.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -2071,7 +2071,8 @@ void ar9003_hw_attach_phy_ops(struct ath
* to be disabled.
*
* 0x04000409: Packet stuck on receive.
- * Full chip reset is required for all chips except AR9340.
+ * Full chip reset is required for all chips except
+ * AR9340, AR9531 and AR9561.
*/
/*
@@ -2100,7 +2101,7 @@ bool ar9003_hw_bb_watchdog_check(struct
case 0x04000b09:
return true;
case 0x04000409:
- if (AR_SREV_9340(ah) || AR_SREV_9531(ah))
+ if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9561(ah))
return false;
else
return true;

View File

@ -1,27 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 15 Jan 2016 18:17:20 +0800
Subject: [PATCH] ath9k: fix inconsistent use of tab and space in
indentation
Minor changes for indenting.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -5485,11 +5485,11 @@ unsigned int ar9003_get_paprd_scale_fact
AR9300_PAPRD_SCALE_1);
else {
if (chan->channel >= 5700)
- return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
- AR9300_PAPRD_SCALE_1);
+ return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
+ AR9300_PAPRD_SCALE_1);
else if (chan->channel >= 5400)
return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
- AR9300_PAPRD_SCALE_2);
+ AR9300_PAPRD_SCALE_2);
else
return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
AR9300_PAPRD_SCALE_1);

View File

@ -1,65 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 15 Jan 2016 18:17:21 +0800
Subject: [PATCH] ath9k: fix data bus error on ar9300 and ar9580
One crash issue be found on ar9300: RTC_RC reg read leads crash, leading
the data bus error, due to RTC_RC reg write not happen properly.
Warm Reset trigger in continuous beacon stuck for one of the customer for
other chip, noticed the MAC was stuck in RTC reset. After analysis noticed
DMA did not complete when RTC was put in reset.
So, before resetting the MAC need to make sure there are no pending DMA
transactions because this reset does not reset all parts of the chip.
The 12th and 11th bit of MAC _DMA_CFG register used to do that.
12 cfg_halt_ack 0x0
0 DMA has not yet halted
1 DMA has halted
11 cfg_halt_req 0x0
0 DMA logic operates normally
1 Request DMA logic to stop so software can reset the MAC
The Bit [12] of this register indicates when the halt has taken effect or
not. the DMA halt IS NOT recoverable; once software sets bit [11] to
request a DMA halt, software must wait for bit [12] to be set and reset
the MAC.
So, the same thing we implemented for ar9580 chip.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct at
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_check_gpm_offset(ah);
+ /* DMA HALT added to resolve ar9300 and ar9580 bus error during
+ * RTC_RC reg read
+ */
+ if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) {
+ REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
+ ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK,
+ 20 * AH_WAIT_TIMEOUT);
+ REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
+ }
+
REG_WRITE(ah, AR_RTC_RC, rst_flags);
REGWRITE_BUFFER_FLUSH(ah);
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -34,8 +34,10 @@
#define AR_CFG_SWRG 0x00000010
#define AR_CFG_AP_ADHOC_INDICATION 0x00000020
#define AR_CFG_PHOK 0x00000100
-#define AR_CFG_CLK_GATE_DIS 0x00000400
#define AR_CFG_EEBS 0x00000200
+#define AR_CFG_CLK_GATE_DIS 0x00000400
+#define AR_CFG_HALT_REQ 0x00000800
+#define AR_CFG_HALT_ACK 0x00001000
#define AR_CFG_PCI_MASTER_REQ_Q_THRESH 0x00060000
#define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S 17

View File

@ -1,19 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Jan 2016 15:59:45 +0100
Subject: [PATCH] brcmfmac: add missing include
linux/module.h is required for defining module parameters
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/netdevice.h>
+#include <linux/module.h>
#include <brcmu_wifi.h>
#include <brcmu_utils.h>
#include "core.h"

View File

@ -1,118 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 19 Jan 2016 12:39:24 +0100
Subject: [PATCH] brcmfmac: fix sdio sg table alloc crash
With commit 7d34b0560567 ("brcmfmac: Move all module parameters to
one place") a bug was introduced causing a null pointer exception.
This patch fixes the bug by initializing the sg table till after
the settings have been initialized.
Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place")
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -879,11 +879,24 @@ int brcmf_sdiod_abort(struct brcmf_sdio_
return 0;
}
-static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
+void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
{
+ struct sdio_func *func;
+ struct mmc_host *host;
+ uint max_blocks;
uint nents;
int err;
+ func = sdiodev->func[2];
+ host = func->card->host;
+ sdiodev->sg_support = host->max_segs > 1;
+ max_blocks = min_t(uint, host->max_blk_count, 511u);
+ sdiodev->max_request_size = min_t(uint, host->max_req_size,
+ max_blocks * func->cur_blksize);
+ sdiodev->max_segment_count = min_t(uint, host->max_segs,
+ SG_MAX_SINGLE_ALLOC);
+ sdiodev->max_segment_size = host->max_seg_size;
+
if (!sdiodev->sg_support)
return;
@@ -1021,9 +1034,6 @@ static void brcmf_sdiod_host_fixup(struc
static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
{
- struct sdio_func *func;
- struct mmc_host *host;
- uint max_blocks;
int ret = 0;
sdiodev->num_funcs = 2;
@@ -1054,26 +1064,6 @@ static int brcmf_sdiod_probe(struct brcm
goto out;
}
- /*
- * determine host related variables after brcmf_sdiod_probe()
- * as func->cur_blksize is properly set and F2 init has been
- * completed successfully.
- */
- func = sdiodev->func[2];
- host = func->card->host;
- sdiodev->sg_support = host->max_segs > 1;
- max_blocks = min_t(uint, host->max_blk_count, 511u);
- sdiodev->max_request_size = min_t(uint, host->max_req_size,
- max_blocks * func->cur_blksize);
- sdiodev->max_segment_count = min_t(uint, host->max_segs,
- SG_MAX_SINGLE_ALLOC);
- sdiodev->max_segment_size = host->max_seg_size;
-
- /* allocate scatter-gather table. sg support
- * will be disabled upon allocation failure.
- */
- brcmf_sdiod_sgtable_alloc(sdiodev);
-
ret = brcmf_sdiod_freezer_attach(sdiodev);
if (ret)
goto out;
@@ -1084,7 +1074,7 @@ static int brcmf_sdiod_probe(struct brcm
ret = -ENODEV;
goto out;
}
- brcmf_sdiod_host_fixup(host);
+ brcmf_sdiod_host_fixup(sdiodev->func[2]->card->host);
out:
if (ret)
brcmf_sdiod_remove(sdiodev);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -4114,6 +4114,11 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
goto fail;
}
+ /* allocate scatter-gather table. sg support
+ * will be disabled upon allocation failure.
+ */
+ brcmf_sdiod_sgtable_alloc(bus->sdiodev);
+
/* Query the F2 block size, set roundup accordingly */
bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
bus->roundup = min(max_roundup, bus->blocksize);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -342,6 +342,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_
/* Issue an abort to the specified function */
int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
+void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
enum brcmf_sdiod_state state);
#ifdef CONFIG_PM_SLEEP

View File

@ -1,38 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 21 Jan 2016 16:28:44 +0100
Subject: [PATCH] ath9k_hw: ignore eeprom magic mismatch on flash based devices
Many AR913x based devices (maybe others too) do not have a valid EEPROM
magic in their calibration data partition.
Fixes: 6fa658fd5ab2 ("ath9k: Simplify and fix eeprom endianness swapping")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -150,18 +150,18 @@ int ath9k_hw_nvram_swap_data(struct ath_
return -EIO;
}
- if (magic == AR5416_EEPROM_MAGIC) {
- *swap_needed = false;
- } else if (swab16(magic) == AR5416_EEPROM_MAGIC) {
+ *swap_needed = false;
+ if (swab16(magic) == AR5416_EEPROM_MAGIC) {
if (ah->ah_flags & AH_NO_EEP_SWAP) {
ath_info(common,
"Ignoring endianness difference in EEPROM magic bytes.\n");
-
- *swap_needed = false;
} else {
*swap_needed = true;
}
- } else {
+ } else if (magic != AR5416_EEPROM_MAGIC) {
+ if (ath9k_hw_use_flash(ah))
+ return 0;
+
ath_err(common,
"Invalid EEPROM Magic (0x%04x).\n", magic);
return -EINVAL;

View File

@ -1,55 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 22 Jan 2016 01:05:56 +0100
Subject: [PATCH] ath9k: do not limit the number of DFS interfaces to 1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -751,14 +751,6 @@ static const struct ieee80211_iface_comb
#endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */
-static const struct ieee80211_iface_limit if_dfs_limits[] = {
- { .max = 1, .types = BIT(NL80211_IFTYPE_AP) |
-#ifdef CPTCFG_MAC80211_MESH
- BIT(NL80211_IFTYPE_MESH_POINT) |
-#endif
- BIT(NL80211_IFTYPE_ADHOC) },
-};
-
static const struct ieee80211_iface_combination if_comb[] = {
{
.limits = if_limits,
@@ -766,6 +758,11 @@ static const struct ieee80211_iface_comb
.max_interfaces = 2048,
.num_different_channels = 1,
.beacon_int_infra_match = true,
+#ifdef CPTCFG_ATH9K_DFS_CERTIFIED
+ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+ BIT(NL80211_CHAN_WIDTH_20) |
+ BIT(NL80211_CHAN_WIDTH_40),
+#endif
},
{
.limits = wds_limits,
@@ -774,18 +771,6 @@ static const struct ieee80211_iface_comb
.num_different_channels = 1,
.beacon_int_infra_match = true,
},
-#ifdef CPTCFG_ATH9K_DFS_CERTIFIED
- {
- .limits = if_dfs_limits,
- .n_limits = ARRAY_SIZE(if_dfs_limits),
- .max_interfaces = 1,
- .num_different_channels = 1,
- .beacon_int_infra_match = true,
- .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
- BIT(NL80211_CHAN_WIDTH_20) |
- BIT(NL80211_CHAN_WIDTH_40),
- }
-#endif
};
#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT

View File

@ -1,27 +0,0 @@
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 21 Jan 2016 14:23:07 +0100
Subject: [PATCH] mac80211: fix txq queue related crashes
The driver can access the queue simultanously
while mac80211 tears down the interface. Without
spinlock protection this could lead to corrupting
sk_buff_head and subsequently to an invalid
pointer dereference.
Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -977,7 +977,10 @@ static void ieee80211_do_stop(struct iee
if (sdata->vif.txq) {
struct txq_info *txqi = to_txq_info(sdata->vif.txq);
+ spin_lock_bh(&txqi->queue.lock);
ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
+ spin_unlock_bh(&txqi->queue.lock);
+
atomic_set(&sdata->txqs_len[txqi->txq.ac], 0);
}

View File

@ -1,57 +0,0 @@
From: Michal Kazior <michal.kazior@tieto.com>
Date: Mon, 25 Jan 2016 14:43:24 +0100
Subject: [PATCH] mac80211: fix unnecessary frame drops in mesh fwding
The ieee80211_queue_stopped() expects hw queue
number but it was given raw WMM AC number instead.
This could cause frame drops and problems with
traffic in some cases - most notably if driver
doesn't map AC numbers to queue numbers 1:1 and
uses ieee80211_stop_queues() and
ieee80211_wake_queue() only without ever calling
ieee80211_wake_queues().
On ath10k it was possible to hit this problem in
the following case:
1. wlan0 uses queue 0
(ath10k maps queues per vif)
2. offchannel uses queue 15
3. queues 1-14 are unused
4. ieee80211_stop_queues()
5. ieee80211_wake_queue(q=0)
6. ieee80211_wake_queue(q=15)
(other queues are not woken up because both
driver and mac80211 know other queues are
unused)
7. ieee80211_rx_h_mesh_fwding()
8. ieee80211_select_queue_80211() returns 2
9. ieee80211_queue_stopped(q=2) returns true
10. frame is dropped (oops!)
Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2235,7 +2235,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
struct ieee80211_local *local = rx->local;
struct ieee80211_sub_if_data *sdata = rx->sdata;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
- u16 q, hdrlen;
+ u16 ac, q, hdrlen;
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
@@ -2304,7 +2304,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
ether_addr_equal(sdata->vif.addr, hdr->addr3))
return RX_CONTINUE;
- q = ieee80211_select_queue_80211(sdata, skb, hdr);
+ ac = ieee80211_select_queue_80211(sdata, skb, hdr);
+ q = sdata->vif.hw_queue[ac];
if (ieee80211_queue_stopped(&local->hw, q)) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
return RX_DROP_MONITOR;

View File

@ -1,103 +0,0 @@
From: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com>
Date: Tue, 12 Jan 2016 14:30:19 +0530
Subject: [PATCH] mac80211: Requeue work after scan complete for all VIF
types.
During a sw scan ieee80211_iface_work ignores work items for all vifs.
However after the scan complete work is requeued only for STA, ADHOC
and MESH iftypes.
This occasionally results in event processing getting delayed/not
processed for iftype AP when it coexists with a STA. This can result
in data halt and eventually disconnection on the AP interface.
Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com>
Cc: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net
---
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1731,7 +1731,6 @@ void ieee80211_ibss_notify_scan_complete
if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
continue;
sdata->u.ibss.last_scan_completed = jiffies;
- ieee80211_queue_work(&local->hw, &sdata->work);
}
mutex_unlock(&local->iflist_mtx);
}
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1369,17 +1369,6 @@ out:
sdata_unlock(sdata);
}
-void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
-{
- struct ieee80211_sub_if_data *sdata;
-
- rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- if (ieee80211_vif_is_mesh(&sdata->vif) &&
- ieee80211_sdata_running(sdata))
- ieee80211_queue_work(&local->hw, &sdata->work);
- rcu_read_unlock();
-}
void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
{
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -362,14 +362,10 @@ static inline bool mesh_path_sel_is_hwmp
return sdata->u.mesh.mesh_pp_id == IEEE80211_PATH_PROTOCOL_HWMP;
}
-void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local);
-
void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata);
void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata);
void ieee80211s_stop(void);
#else
-static inline void
-ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {}
static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata)
{ return false; }
static inline void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata)
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3978,8 +3978,6 @@ static void ieee80211_restart_sta_timer(
if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
ieee80211_queue_work(&sdata->local->hw,
&sdata->u.mgd.monitor_work);
- /* and do all the other regular work too */
- ieee80211_queue_work(&sdata->local->hw, &sdata->work);
}
}
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -314,6 +314,7 @@ static void __ieee80211_scan_completed(s
bool was_scanning = local->scanning;
struct cfg80211_scan_request *scan_req;
struct ieee80211_sub_if_data *scan_sdata;
+ struct ieee80211_sub_if_data *sdata;
lockdep_assert_held(&local->mtx);
@@ -373,7 +374,15 @@ static void __ieee80211_scan_completed(s
ieee80211_mlme_notify_scan_completed(local);
ieee80211_ibss_notify_scan_completed(local);
- ieee80211_mesh_notify_scan_completed(local);
+
+ /* Requeue all the work that might have been ignored while
+ * the scan was in progress
+ */
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (ieee80211_sdata_running(sdata))
+ ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+ }
+
if (was_scanning)
ieee80211_start_next_roc(local);
}

View File

@ -1,57 +0,0 @@
From: Sara Sharon <sara.sharon@intel.com>
Date: Mon, 25 Jan 2016 15:46:35 +0200
Subject: [PATCH] mac80211: fix ibss scan parameters
When joining IBSS a full scan should be initiated in order to search
for existing cell, unless the fixed_channel parameter was set.
A default channel to create the IBSS on if no cell was found is
provided as well.
However - a scan is initiated only on the default channel provided
regardless of whether ifibss->fixed_channel is set or not, with the
obvious result of the cell not joining existing IBSS cell that is
on another channel.
Fixes: 76bed0f43b27 ("mac80211: IBSS fix scan request")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -7,6 +7,7 @@
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
* Copyright 2009, Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -1483,14 +1484,21 @@ static void ieee80211_sta_find_ibss(stru
sdata_info(sdata, "Trigger new scan to find an IBSS to join\n");
- num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy,
- &ifibss->chandef,
- channels,
- ARRAY_SIZE(channels));
scan_width = cfg80211_chandef_to_scan_width(&ifibss->chandef);
- ieee80211_request_ibss_scan(sdata, ifibss->ssid,
- ifibss->ssid_len, channels, num,
- scan_width);
+
+ if (ifibss->fixed_channel) {
+ num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy,
+ &ifibss->chandef,
+ channels,
+ ARRAY_SIZE(channels));
+ ieee80211_request_ibss_scan(sdata, ifibss->ssid,
+ ifibss->ssid_len, channels,
+ num, scan_width);
+ } else {
+ ieee80211_request_ibss_scan(sdata, ifibss->ssid,
+ ifibss->ssid_len, NULL,
+ 0, scan_width);
+ }
} else {
int interval = IEEE80211_SCAN_INTERVAL;

View File

@ -1,50 +0,0 @@
From: Chris Bainbridge <chris.bainbridge@gmail.com>
Date: Wed, 27 Jan 2016 15:46:18 +0000
Subject: [PATCH] net/mac80211/agg-rx.c: fix use of uninitialised values
Use kzalloc instead of kmalloc for struct tid_ampdu_rx. Fixes:
[ 7.976605] UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29
[ 7.976608] load of value 2 is not a valid value for type '_Bool'
[ 7.976611] CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265
[ 7.976613] Hardware name: Apple Inc. MacBookPro10,2/Mac-AFD8A9D944EA4843, BIOS MBP102.88Z.0106.B0A.1509130955 09/13/2015
[ 7.976616] Workqueue: phy0 rt2x00usb_work_rxdone
[ 7.976619] 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007
[ 7.976622] ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500
[ 7.976626] ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032
[ 7.976629] Call Trace:
[ 7.976633] [<ffffffff8181d866>] dump_stack+0x45/0x5f
[ 7.976637] [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40
[ 7.976642] [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70
[ 7.976646] [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730
[ 7.976650] [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00
[ 7.976654] [<ffffffff81cb27ce>] ? usb_hcd_map_urb_for_dma+0x65e/0x960
[ 7.976659] [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750
[ 7.976663] [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990
[ 7.976667] [<ffffffff81c5fb85>] rt2x00lib_rxdone+0x305/0xbd0
[ 7.976670] [<ffffffff811ac23f>] ? dequeue_task_fair+0x64f/0x1de0
[ 7.976674] [<ffffffff811a1516>] ? sched_clock_cpu+0xe6/0x150
[ 7.976678] [<ffffffff81c6c45c>] rt2x00usb_work_rxdone+0x7c/0x140
[ 7.976682] [<ffffffff8117aef6>] process_one_work+0x226/0x860
[ 7.976686] [<ffffffff8117b58c>] worker_thread+0x5c/0x680
[ 7.976690] [<ffffffff8117b530>] ? process_one_work+0x860/0x860
[ 7.976693] [<ffffffff81184f86>] kthread+0xf6/0x150
[ 7.976697] [<ffffffff81184e90>] ? kthread_worker_fn+0x310/0x310
[ 7.976700] [<ffffffff822a94df>] ret_from_fork+0x3f/0x70
[ 7.976703] [<ffffffff81184e90>] ? kthread_worker_fn+0x310/0x310
Link: https://lkml.org/lkml/2016/1/26/230
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
---
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -327,7 +327,7 @@ void __ieee80211_start_rx_ba_session(str
}
/* prepare A-MPDU MLME for Rx aggregation */
- tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL);
+ tid_agg_rx = kzalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL);
if (!tid_agg_rx)
goto end;

View File

@ -1,45 +0,0 @@
From: Konstantin Khlebnikov <koct9i@gmail.com>
Date: Fri, 29 Jan 2016 11:35:12 +0300
Subject: [PATCH] mac80211: minstrel_ht: fix out-of-bound in
minstrel_ht_set_best_prob_rate
Patch fixes this splat
BUG: KASAN: slab-out-of-bounds in minstrel_ht_update_stats.isra.7+0x6e1/0x9e0
[mac80211] at addr ffff8800cee640f4 Read of size 4 by task swapper/3/0
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Link: http://lkml.kernel.org/r/CALYGNiNyJhSaVnE35qS6UCGaSb2Dx1_i5HcRavuOX14oTz2P+w@mail.gmail.com
---
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -414,15 +414,16 @@ minstrel_ht_set_best_prob_rate(struct mi
(max_tp_group != MINSTREL_CCK_GROUP))
return;
+ max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES;
+ max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES;
+ max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma;
+
if (mrs->prob_ewma > MINSTREL_FRAC(75, 100)) {
cur_tp_avg = minstrel_ht_get_tp_avg(mi, cur_group, cur_idx,
mrs->prob_ewma);
if (cur_tp_avg > tmp_tp_avg)
mi->max_prob_rate = index;
- max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES;
- max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES;
- max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma;
max_gpr_tp_avg = minstrel_ht_get_tp_avg(mi, max_gpr_group,
max_gpr_idx,
max_gpr_prob);
@@ -431,7 +432,7 @@ minstrel_ht_set_best_prob_rate(struct mi
} else {
if (mrs->prob_ewma > tmp_prob)
mi->max_prob_rate = index;
- if (mrs->prob_ewma > mg->rates[mg->max_group_prob_rate].prob_ewma)
+ if (mrs->prob_ewma > max_gpr_prob)
mg->max_group_prob_rate = index;
}
}

View File

@ -1,35 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 2 Feb 2016 14:39:08 +0100
Subject: [PATCH] mac80211: move A-MSDU skb_linearize call to
ieee80211_amsdu_to_8023s
Prepararation for zero-copy A-MSDU support with page fragment SKBs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2203,9 +2203,6 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx
skb->dev = dev;
__skb_queue_head_init(&frame_list);
- if (skb_linearize(skb))
- return RX_DROP_UNUSABLE;
-
ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
rx->sdata->vif.type,
rx->local->hw.extra_tx_headroom, true);
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -657,6 +657,9 @@ void ieee80211_amsdu_to_8023s(struct sk_
int remaining, err;
u8 dst[ETH_ALEN], src[ETH_ALEN];
+ if (skb_linearize(skb))
+ goto out;
+
if (has_80211_header) {
err = ieee80211_data_to_8023(skb, addr, iftype);
if (err)

View File

@ -1,186 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 2 Feb 2016 14:39:09 +0100
Subject: [PATCH] cfg80211: add function for 802.3 conversion with separate
output buffer
Use skb_copy_bits in preparation for allowing fragmented skbs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -393,9 +393,9 @@ unsigned int ieee80211_get_hdrlen_from_s
}
EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
-unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+static unsigned int __ieee80211_get_mesh_hdrlen(u8 flags)
{
- int ae = meshhdr->flags & MESH_FLAGS_AE;
+ int ae = flags & MESH_FLAGS_AE;
/* 802.11-2012, 8.2.4.7.3 */
switch (ae) {
default:
@@ -407,21 +407,31 @@ unsigned int ieee80211_get_mesh_hdrlen(s
return 18;
}
}
+
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+{
+ return __ieee80211_get_mesh_hdrlen(meshhdr->flags);
+}
EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
-int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
- enum nl80211_iftype iftype)
+static int __ieee80211_data_to_8023(struct sk_buff *skb, struct ethhdr *ehdr,
+ const u8 *addr, enum nl80211_iftype iftype)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 hdrlen, ethertype;
- u8 *payload;
- u8 dst[ETH_ALEN];
- u8 src[ETH_ALEN] __aligned(2);
+ struct {
+ u8 hdr[ETH_ALEN] __aligned(2);
+ __be16 proto;
+ } payload;
+ struct ethhdr tmp;
+ u16 hdrlen;
+ u8 mesh_flags = 0;
if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
return -1;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ if (skb->len < hdrlen + 8)
+ return -1;
/* convert IEEE 802.11 header + possible LLC headers into Ethernet
* header
@@ -432,8 +442,11 @@ int ieee80211_data_to_8023(struct sk_buf
* 1 0 BSSID SA DA n/a
* 1 1 RA TA DA SA
*/
- memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
- memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
+ memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN);
+ memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN);
+
+ if (iftype == NL80211_IFTYPE_MESH_POINT)
+ skb_copy_bits(skb, hdrlen, &mesh_flags, 1);
switch (hdr->frame_control &
cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
@@ -450,44 +463,31 @@ int ieee80211_data_to_8023(struct sk_buf
iftype != NL80211_IFTYPE_STATION))
return -1;
if (iftype == NL80211_IFTYPE_MESH_POINT) {
- struct ieee80211s_hdr *meshdr =
- (struct ieee80211s_hdr *) (skb->data + hdrlen);
- /* make sure meshdr->flags is on the linear part */
- if (!pskb_may_pull(skb, hdrlen + 1))
- return -1;
- if (meshdr->flags & MESH_FLAGS_AE_A4)
+ if (mesh_flags & MESH_FLAGS_AE_A4)
return -1;
- if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
+ if (mesh_flags & MESH_FLAGS_AE_A5_A6) {
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
- dst, ETH_ALEN);
- skb_copy_bits(skb, hdrlen +
- offsetof(struct ieee80211s_hdr, eaddr2),
- src, ETH_ALEN);
+ tmp.h_dest, 2 * ETH_ALEN);
}
- hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
+ hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags);
}
break;
case cpu_to_le16(IEEE80211_FCTL_FROMDS):
if ((iftype != NL80211_IFTYPE_STATION &&
iftype != NL80211_IFTYPE_P2P_CLIENT &&
iftype != NL80211_IFTYPE_MESH_POINT) ||
- (is_multicast_ether_addr(dst) &&
- ether_addr_equal(src, addr)))
+ (is_multicast_ether_addr(tmp.h_dest) &&
+ ether_addr_equal(tmp.h_source, addr)))
return -1;
if (iftype == NL80211_IFTYPE_MESH_POINT) {
- struct ieee80211s_hdr *meshdr =
- (struct ieee80211s_hdr *) (skb->data + hdrlen);
- /* make sure meshdr->flags is on the linear part */
- if (!pskb_may_pull(skb, hdrlen + 1))
- return -1;
- if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
+ if (mesh_flags & MESH_FLAGS_AE_A5_A6)
return -1;
- if (meshdr->flags & MESH_FLAGS_AE_A4)
+ if (mesh_flags & MESH_FLAGS_AE_A4)
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
- src, ETH_ALEN);
- hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
+ tmp.h_source, ETH_ALEN);
+ hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags);
}
break;
case cpu_to_le16(0):
@@ -498,33 +498,33 @@ int ieee80211_data_to_8023(struct sk_buf
break;
}
- if (!pskb_may_pull(skb, hdrlen + 8))
- return -1;
-
- payload = skb->data + hdrlen;
- ethertype = (payload[6] << 8) | payload[7];
+ skb_copy_bits(skb, hdrlen, &payload, sizeof(payload));
+ tmp.h_proto = payload.proto;
- if (likely((ether_addr_equal(payload, rfc1042_header) &&
- ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
- ether_addr_equal(payload, bridge_tunnel_header))) {
+ if (likely((ether_addr_equal(payload.hdr, rfc1042_header) &&
+ tmp.h_proto != htons(ETH_P_AARP) &&
+ tmp.h_proto != htons(ETH_P_IPX)) ||
+ ether_addr_equal(payload.hdr, bridge_tunnel_header)))
/* remove RFC1042 or Bridge-Tunnel encapsulation and
* replace EtherType */
- skb_pull(skb, hdrlen + 6);
- memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
- memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
- } else {
- struct ethhdr *ehdr;
- __be16 len;
+ hdrlen += ETH_ALEN + 2;
+ else
+ tmp.h_proto = htons(skb->len);
- skb_pull(skb, hdrlen);
- len = htons(skb->len);
+ pskb_pull(skb, hdrlen);
+
+ if (!ehdr)
ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
- memcpy(ehdr->h_dest, dst, ETH_ALEN);
- memcpy(ehdr->h_source, src, ETH_ALEN);
- ehdr->h_proto = len;
- }
+ memcpy(ehdr, &tmp, sizeof(tmp));
+
return 0;
}
+
+int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
+ enum nl80211_iftype iftype)
+{
+ return __ieee80211_data_to_8023(skb, NULL, addr, iftype);
+}
EXPORT_SYMBOL(ieee80211_data_to_8023);
int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,

View File

@ -1,159 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 2 Feb 2016 14:39:10 +0100
Subject: [PATCH] cfg80211: add support for non-linear skbs in
ieee80211_amsdu_to_8023s
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -644,73 +644,75 @@ int ieee80211_data_from_8023(struct sk_b
}
EXPORT_SYMBOL(ieee80211_data_from_8023);
+static struct sk_buff *
+__ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen,
+ int offset, int len)
+{
+ struct sk_buff *frame;
+
+ if (skb->len - offset < len)
+ return NULL;
+
+ /*
+ * Allocate and reserve two bytes more for payload
+ * alignment since sizeof(struct ethhdr) is 14.
+ */
+ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len);
+
+ skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
+ skb_copy_bits(skb, offset, skb_put(frame, len), len);
+
+ return frame;
+}
void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
const u8 *addr, enum nl80211_iftype iftype,
const unsigned int extra_headroom,
bool has_80211_header)
{
+ unsigned int hlen = ALIGN(extra_headroom, 4);
struct sk_buff *frame = NULL;
u16 ethertype;
u8 *payload;
- const struct ethhdr *eth;
- int remaining, err;
- u8 dst[ETH_ALEN], src[ETH_ALEN];
-
- if (skb_linearize(skb))
- goto out;
+ int offset = 0, remaining, err;
+ struct ethhdr eth;
+ bool reuse_skb = true;
+ bool last = false;
if (has_80211_header) {
- err = ieee80211_data_to_8023(skb, addr, iftype);
+ err = __ieee80211_data_to_8023(skb, &eth, addr, iftype);
if (err)
goto out;
-
- /* skip the wrapping header */
- eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
- if (!eth)
- goto out;
- } else {
- eth = (struct ethhdr *) skb->data;
}
- while (skb != frame) {
+ while (!last) {
+ unsigned int subframe_len;
+ int len;
u8 padding;
- __be16 len = eth->h_proto;
- unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len);
-
- remaining = skb->len;
- memcpy(dst, eth->h_dest, ETH_ALEN);
- memcpy(src, eth->h_source, ETH_ALEN);
+ skb_copy_bits(skb, offset, &eth, sizeof(eth));
+ len = ntohs(eth.h_proto);
+ subframe_len = sizeof(struct ethhdr) + len;
padding = (4 - subframe_len) & 0x3;
+
/* the last MSDU has no padding */
+ remaining = skb->len - offset;
if (subframe_len > remaining)
goto purge;
- skb_pull(skb, sizeof(struct ethhdr));
+ offset += sizeof(struct ethhdr);
/* reuse skb for the last subframe */
- if (remaining <= subframe_len + padding)
+ last = remaining <= subframe_len + padding;
+ if (!skb_is_nonlinear(skb) && last) {
+ skb_pull(skb, offset);
frame = skb;
- else {
- unsigned int hlen = ALIGN(extra_headroom, 4);
- /*
- * Allocate and reserve two bytes more for payload
- * alignment since sizeof(struct ethhdr) is 14.
- */
- frame = dev_alloc_skb(hlen + subframe_len + 2);
+ reuse_skb = true;
+ } else {
+ frame = __ieee80211_amsdu_copy(skb, hlen, offset, len);
if (!frame)
goto purge;
- skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
- memcpy(skb_put(frame, ntohs(len)), skb->data,
- ntohs(len));
-
- eth = (struct ethhdr *)skb_pull(skb, ntohs(len) +
- padding);
- if (!eth) {
- dev_kfree_skb(frame);
- goto purge;
- }
+ offset += len + padding;
}
skb_reset_network_header(frame);
@@ -719,24 +721,20 @@ void ieee80211_amsdu_to_8023s(struct sk_
payload = frame->data;
ethertype = (payload[6] << 8) | payload[7];
-
if (likely((ether_addr_equal(payload, rfc1042_header) &&
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
ether_addr_equal(payload, bridge_tunnel_header))) {
- /* remove RFC1042 or Bridge-Tunnel
- * encapsulation and replace EtherType */
- skb_pull(frame, 6);
- memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
- memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
- } else {
- memcpy(skb_push(frame, sizeof(__be16)), &len,
- sizeof(__be16));
- memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
- memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
+ eth.h_proto = htons(ethertype);
+ skb_pull(frame, ETH_ALEN + 2);
}
+
+ memcpy(skb_push(frame, sizeof(eth)), &eth, sizeof(eth));
__skb_queue_tail(list, frame);
}
+ if (!reuse_skb)
+ dev_kfree_skb(skb);
+
return;
purge:

View File

@ -1,155 +0,0 @@
From: Sven Eckelmann <sven@narfation.org>
Date: Tue, 26 Jan 2016 17:11:13 +0100
Subject: [PATCH] mac80211: Parse legacy and HT rate in injected frames
Drivers/devices without their own rate control algorithm can get the
information what rates they should use from either the radiotap header of
injected frames or from the rate control algorithm. But the parsing of the
legacy rate information from the radiotap header was removed in commit
e6a9854b05c1 ("mac80211/drivers: rewrite the rate control API").
The removal of this feature heavily reduced the usefulness of frame
injection when wanting to simulate specific transmission behavior. Having
rate parsing together with MCS rates and retry support allows a fine
grained selection of the tx behavior of injected frames for these kind of
tests.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -708,12 +708,14 @@ enum mac80211_tx_info_flags {
* protocol frame (e.g. EAP)
* @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
* frame (PS-Poll or uAPSD).
+ * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
*
* These flags are used in tx_info->control.flags.
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0),
IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1),
+ IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
};
/*
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -710,6 +710,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
info->control.short_preamble = txrc.short_preamble;
+ /* don't ask rate control when rate already injected via radiotap */
+ if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT)
+ return TX_CONTINUE;
+
if (tx->sta)
assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC);
@@ -1665,15 +1669,24 @@ void ieee80211_xmit(struct ieee80211_sub
ieee80211_tx(sdata, sta, skb, false);
}
-static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb)
+static bool ieee80211_parse_tx_radiotap(struct ieee80211_local *local,
+ struct sk_buff *skb)
{
struct ieee80211_radiotap_iterator iterator;
struct ieee80211_radiotap_header *rthdr =
(struct ieee80211_radiotap_header *) skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_supported_band *sband =
+ local->hw.wiphy->bands[info->band];
int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len,
NULL);
u16 txflags;
+ u16 rate = 0;
+ bool rate_found = false;
+ u8 rate_retries = 0;
+ u16 rate_flags = 0;
+ u8 mcs_known, mcs_flags;
+ int i;
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
IEEE80211_TX_CTL_DONTFRAG;
@@ -1724,6 +1737,35 @@ static bool ieee80211_parse_tx_radiotap(
info->flags |= IEEE80211_TX_CTL_NO_ACK;
break;
+ case IEEE80211_RADIOTAP_RATE:
+ rate = *iterator.this_arg;
+ rate_flags = 0;
+ rate_found = true;
+ break;
+
+ case IEEE80211_RADIOTAP_DATA_RETRIES:
+ rate_retries = *iterator.this_arg;
+ break;
+
+ case IEEE80211_RADIOTAP_MCS:
+ mcs_known = iterator.this_arg[0];
+ mcs_flags = iterator.this_arg[1];
+ if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS))
+ break;
+
+ rate_found = true;
+ rate = iterator.this_arg[2];
+ rate_flags = IEEE80211_TX_RC_MCS;
+
+ if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI &&
+ mcs_flags & IEEE80211_RADIOTAP_MCS_SGI)
+ rate_flags |= IEEE80211_TX_RC_SHORT_GI;
+
+ if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW &&
+ mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40)
+ rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ break;
+
/*
* Please update the file
* Documentation/networking/mac80211-injection.txt
@@ -1738,6 +1780,32 @@ static bool ieee80211_parse_tx_radiotap(
if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
return false;
+ if (rate_found) {
+ info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT;
+
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ info->control.rates[i].idx = -1;
+ info->control.rates[i].flags = 0;
+ info->control.rates[i].count = 0;
+ }
+
+ if (rate_flags & IEEE80211_TX_RC_MCS) {
+ info->control.rates[0].idx = rate;
+ } else {
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (rate * 5 != sband->bitrates[i].bitrate)
+ continue;
+
+ info->control.rates[0].idx = i;
+ break;
+ }
+ }
+
+ info->control.rates[0].flags = rate_flags;
+ info->control.rates[0].count = min_t(u8, rate_retries + 1,
+ local->hw.max_rate_tries);
+ }
+
/*
* remove the radiotap header
* iterator->_max_length was sanity-checked against
@@ -1819,7 +1887,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
IEEE80211_TX_CTL_INJECTED;
/* process and remove the injection radiotap header */
- if (!ieee80211_parse_tx_radiotap(skb))
+ if (!ieee80211_parse_tx_radiotap(local, skb))
goto fail;
rcu_read_lock();

View File

@ -1,317 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 5 Feb 2016 01:38:51 +0100
Subject: [PATCH] mac80211: add A-MSDU tx support
Requires software tx queueing support. frag_list support (for zero-copy)
is optional.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -709,6 +709,7 @@ enum mac80211_tx_info_flags {
* @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
* frame (PS-Poll or uAPSD).
* @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
+ * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
*
* These flags are used in tx_info->control.flags.
*/
@@ -716,6 +717,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0),
IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1),
IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
+ IEEE80211_TX_CTRL_AMSDU = BIT(3),
};
/*
@@ -1728,6 +1730,7 @@ struct ieee80211_sta_rates {
* size is min(max_amsdu_len, 7935) bytes.
* Both additional HT limits must be enforced by the low level driver.
* This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2).
+ * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
*/
struct ieee80211_sta {
@@ -1748,6 +1751,7 @@ struct ieee80211_sta {
bool mfp;
u8 max_amsdu_subframes;
u16 max_amsdu_len;
+ u16 max_rc_amsdu_len;
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
@@ -1961,6 +1965,15 @@ struct ieee80211_txq {
* order and does not need to manage its own reorder buffer or BA session
* timeout.
*
+ * @IEEE80211_HW_TX_AMSDU: Hardware (or driver) supports software aggregated
+ * A-MSDU frames. Requires software tx queueing and fast-xmit support.
+ * When not using minstrel/minstrel_ht rate control, the driver should
+ * limit the maximum A-MSDU size based on the current tx rate by setting
+ * max_rc_amsdu_len in struct ieee80211_sta.
+ *
+ * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list
+ * skbs, needed for zero-copy software A-MSDU.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -1998,6 +2011,8 @@ enum ieee80211_hw_flags {
IEEE80211_HW_BEACON_TX_STATUS,
IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR,
IEEE80211_HW_SUPPORTS_REORDERING_BUFFER,
+ IEEE80211_HW_TX_AMSDU,
+ IEEE80211_HW_TX_FRAG_LIST,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -2070,6 +2085,9 @@ enum ieee80211_hw_flags {
* size is smaller (an example is LinkSys WRT120N with FW v1.0.07
* build 002 Jun 18 2012).
*
+ * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum
+ * of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list.
+ *
* @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX
* (if %IEEE80211_HW_QUEUE_CONTROL is set)
*
@@ -2124,6 +2142,7 @@ struct ieee80211_hw {
u8 max_rate_tries;
u8 max_rx_aggregation_subframes;
u8 max_tx_aggregation_subframes;
+ u8 max_tx_fragments;
u8 offchannel_tx_hw_queue;
u8 radiotap_mcs_details;
u16 radiotap_vht_details;
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -935,6 +935,7 @@ void ieee80211_process_addba_resp(struct
size_t len)
{
struct tid_ampdu_tx *tid_tx;
+ struct ieee80211_txq *txq;
u16 capab, tid;
u8 buf_size;
bool amsdu;
@@ -945,6 +946,10 @@ void ieee80211_process_addba_resp(struct
buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
+ txq = sta->sta.txq[tid];
+ if (!amsdu && txq)
+ set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags);
+
mutex_lock(&sta->ampdu_mlme.mtx);
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -127,6 +127,8 @@ static const char *hw_flag_names[NUM_IEE
FLAG(BEACON_TX_STATUS),
FLAG(NEEDS_UNIQUE_STA_ADDR),
FLAG(SUPPORTS_REORDERING_BUFFER),
+ FLAG(TX_AMSDU),
+ FLAG(TX_FRAG_LIST),
/* keep last for the build bug below */
(void *)0x1
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -799,6 +799,7 @@ struct mac80211_qos_map {
enum txq_info_flags {
IEEE80211_TXQ_STOP,
IEEE80211_TXQ_AMPDU,
+ IEEE80211_TXQ_NO_AMSDU,
};
struct txq_info {
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1318,6 +1318,10 @@ struct sk_buff *ieee80211_tx_dequeue(str
out:
spin_unlock_bh(&txqi->queue.lock);
+ if (skb && skb_has_frag_list(skb) &&
+ !ieee80211_hw_check(&local->hw, TX_FRAG_LIST))
+ skb_linearize(skb);
+
return skb;
}
EXPORT_SYMBOL(ieee80211_tx_dequeue);
@@ -2757,6 +2761,163 @@ void ieee80211_clear_fast_xmit(struct st
kfree_rcu(fast_tx, rcu_head);
}
+static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local,
+ struct sk_buff *skb, int headroom,
+ int *subframe_len)
+{
+ int amsdu_len = *subframe_len + sizeof(struct ethhdr);
+ int padding = (4 - amsdu_len) & 3;
+
+ if (skb_headroom(skb) < headroom || skb_tailroom(skb) < padding) {
+ I802_DEBUG_INC(local->tx_expand_skb_head);
+
+ if (pskb_expand_head(skb, headroom, padding, GFP_ATOMIC)) {
+ wiphy_debug(local->hw.wiphy,
+ "failed to reallocate TX buffer\n");
+ return false;
+ }
+ }
+
+ if (padding) {
+ *subframe_len += padding;
+ memset(skb_put(skb, padding), 0, padding);
+ }
+
+ return true;
+}
+
+static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_fast_tx *fast_tx,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr;
+ struct ethhdr amsdu_hdr;
+ int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header);
+ int subframe_len = skb->len - hdr_len;
+ void *data;
+ u8 *qc;
+
+ if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
+ return false;
+
+ if (info->control.flags & IEEE80211_TX_CTRL_AMSDU)
+ return true;
+
+ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(amsdu_hdr),
+ &subframe_len))
+ return false;
+
+ amsdu_hdr.h_proto = cpu_to_be16(subframe_len);
+ memcpy(amsdu_hdr.h_source, skb->data + fast_tx->sa_offs, ETH_ALEN);
+ memcpy(amsdu_hdr.h_dest, skb->data + fast_tx->da_offs, ETH_ALEN);
+
+ data = skb_push(skb, sizeof(amsdu_hdr));
+ memmove(data, data + sizeof(amsdu_hdr), hdr_len);
+ memcpy(data + hdr_len, &amsdu_hdr, sizeof(amsdu_hdr));
+
+ hdr = data;
+ qc = ieee80211_get_qos_ctl(hdr);
+ *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+
+ info->control.flags |= IEEE80211_TX_CTRL_AMSDU;
+
+ return true;
+}
+
+static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ struct ieee80211_fast_tx *fast_tx,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+ struct ieee80211_txq *txq = sta->sta.txq[tid];
+ struct txq_info *txqi;
+ struct sk_buff **frag_tail, *head;
+ int subframe_len = skb->len - ETH_ALEN;
+ u8 max_subframes = sta->sta.max_amsdu_subframes;
+ int max_frags = local->hw.max_tx_fragments;
+ int max_amsdu_len = sta->sta.max_amsdu_len;
+ __be16 len;
+ void *data;
+ bool ret = false;
+ int n = 1, nfrags;
+
+ if (!ieee80211_hw_check(&local->hw, TX_AMSDU))
+ return false;
+
+ if (!txq)
+ return false;
+
+ txqi = to_txq_info(txq);
+ if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags))
+ return false;
+
+ if (sta->sta.max_rc_amsdu_len)
+ max_amsdu_len = min_t(int, max_amsdu_len,
+ sta->sta.max_rc_amsdu_len);
+
+ spin_lock_bh(&txqi->queue.lock);
+
+ head = skb_peek_tail(&txqi->queue);
+ if (!head)
+ goto out;
+
+ if (skb->len + head->len > max_amsdu_len)
+ goto out;
+
+ /*
+ * HT A-MPDU limits maximum MPDU size to 4095 bytes. Since aggregation
+ * sessions are started/stopped without txq flush, use the limit here
+ * to avoid having to de-aggregate later.
+ */
+ if (skb->len + head->len > 4095 &&
+ !sta->sta.vht_cap.vht_supported)
+ goto out;
+
+ if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head))
+ goto out;
+
+ nfrags = 1 + skb_shinfo(skb)->nr_frags;
+ nfrags += 1 + skb_shinfo(head)->nr_frags;
+ frag_tail = &skb_shinfo(head)->frag_list;
+ while (*frag_tail) {
+ nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags;
+ frag_tail = &(*frag_tail)->next;
+ n++;
+ }
+
+ if (max_subframes && n > max_subframes)
+ goto out;
+
+ if (max_frags && nfrags > max_frags)
+ goto out;
+
+ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + 2,
+ &subframe_len))
+ return false;
+
+ ret = true;
+ data = skb_push(skb, ETH_ALEN + 2);
+ memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN);
+
+ data += 2 * ETH_ALEN;
+ len = cpu_to_be16(subframe_len);
+ memcpy(data, &len, 2);
+ memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header));
+
+ head->len += skb->len;
+ head->data_len += skb->len;
+ *frag_tail = skb;
+
+out:
+ spin_unlock_bh(&txqi->queue.lock);
+
+ return ret;
+}
+
static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
struct net_device *dev, struct sta_info *sta,
struct ieee80211_fast_tx *fast_tx,
@@ -2811,6 +2972,10 @@ static bool ieee80211_xmit_fast(struct i
ieee80211_tx_stats(dev, skb->len + extra_head);
+ if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) &&
+ ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb))
+ return true;
+
/* will not be crypto-handled beyond what we do here, so use false
* as the may-encrypt argument for the resize to not account for
* more room than we already have in 'extra_head'

View File

@ -1,64 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 20 Jan 2016 16:46:04 +0100
Subject: [PATCH] brcmfmac: fix setting primary channel for 80 MHz width
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
First of all it changes the way we calculate primary channel offset. If
we use e.g. 80 MHz channel with primary frequency 5180 MHz (which means
center frequency is 5210 MHz) it makes sense to calculate primary offset
as -30 MHz.
Then it fixes values we compare primary_offset with. We were comparing
offset in MHz against -2 or 2 which was resulting in picking a wrong
primary channel.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -247,7 +247,7 @@ static u16 chandef_to_chanspec(struct br
brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n",
ch->chan->center_freq, ch->center_freq1, ch->width);
ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1);
- primary_offset = ch->center_freq1 - ch->chan->center_freq;
+ primary_offset = ch->chan->center_freq - ch->center_freq1;
switch (ch->width) {
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
@@ -256,24 +256,21 @@ static u16 chandef_to_chanspec(struct br
break;
case NL80211_CHAN_WIDTH_40:
ch_inf.bw = BRCMU_CHAN_BW_40;
- if (primary_offset < 0)
+ if (primary_offset > 0)
ch_inf.sb = BRCMU_CHAN_SB_U;
else
ch_inf.sb = BRCMU_CHAN_SB_L;
break;
case NL80211_CHAN_WIDTH_80:
ch_inf.bw = BRCMU_CHAN_BW_80;
- if (primary_offset < 0) {
- if (primary_offset < -CH_10MHZ_APART)
- ch_inf.sb = BRCMU_CHAN_SB_UU;
- else
- ch_inf.sb = BRCMU_CHAN_SB_UL;
- } else {
- if (primary_offset > CH_10MHZ_APART)
- ch_inf.sb = BRCMU_CHAN_SB_LL;
- else
- ch_inf.sb = BRCMU_CHAN_SB_LU;
- }
+ if (primary_offset == -30)
+ ch_inf.sb = BRCMU_CHAN_SB_LL;
+ else if (primary_offset == -10)
+ ch_inf.sb = BRCMU_CHAN_SB_LU;
+ else if (primary_offset == 10)
+ ch_inf.sb = BRCMU_CHAN_SB_UL;
+ else
+ ch_inf.sb = BRCMU_CHAN_SB_UU;
break;
case NL80211_CHAN_WIDTH_80P80:
case NL80211_CHAN_WIDTH_160:

View File

@ -1,51 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 26 Jan 2016 17:57:01 +0100
Subject: [PATCH] brcmfmac: analyze descriptors of current component only
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
So far we were looking for address descriptors without a check for
crossing current component border. In case of dealing with unsupported
descriptor or descriptor missing at all the code would incorrectly get
data from another component.
Consider this binary-described component from BCM4366 EROM:
4bf83b01 TAG==CI CID==0x83b
20080201 TAG==CI PORTS==0+1 WRAPPERS==0+1
18400035 TAG==ADDR SZ_SZD TYPE_SLAVE
00050000
18107085 TAG==ADDR SZ_4K TYPE_SWRAP
Driver was assigning invalid base address to this core:
brcmfmac: [6 ] core 0x83b:32 base 0x18109000 wrap 0x18107000
which came from totally different component defined in EROM:
43b36701 TAG==CI CID==0x367
00000201 TAG==CI PORTS==0+1 WRAPPERS==0+0
18109005 TAG==ADDR SZ_4K TYPE_SLAVE
This change will also allow us to support components without wrapper
address in the future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -803,7 +803,14 @@ static int brcmf_chip_dmp_get_regaddr(st
*eromaddr -= 4;
return -EFAULT;
}
- } while (desc != DMP_DESC_ADDRESS);
+ } while (desc != DMP_DESC_ADDRESS &&
+ desc != DMP_DESC_COMPONENT);
+
+ /* stop if we crossed current component border */
+ if (desc == DMP_DESC_COMPONENT) {
+ *eromaddr -= 4;
+ return 0;
+ }
/* skip upper 32-bit address descriptor */
if (val & DMP_DESC_ADDRSIZE_GT32)

View File

@ -1,28 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 26 Jan 2016 17:57:02 +0100
Subject: [PATCH] brcmfmac: allow storing PMU core without wrapper address
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Separated PMU core can be found in new devices and should be used for
accessing PMU registers (which were routed through ChipCommon so far).
This core is one of exceptions that doesn't have or need wrapper address
to be still safely accessible.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -883,7 +883,8 @@ int brcmf_chip_dmp_erom_scan(struct brcm
rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S;
/* need core with ports */
- if (nmw + nsw == 0)
+ if (nmw + nsw == 0 &&
+ id != BCMA_CORE_PMU)
continue;
/* try to obtain register address info */

View File

@ -1,43 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 26 Jan 2016 17:57:03 +0100
Subject: [PATCH] brcmfmac: read extended capabilities of ChipCommon core
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is an extra bitfield with info about some present hardware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -1025,6 +1025,9 @@ static int brcmf_chip_setup(struct brcmf
/* get chipcommon capabilites */
pub->cc_caps = chip->ops->read32(chip->ctx,
CORE_CC_REG(base, capabilities));
+ pub->cc_caps_ext = chip->ops->read32(chip->ctx,
+ CORE_CC_REG(base,
+ capabilities_ext));
/* get pmu caps & rev */
if (pub->cc_caps & CC_CAP_PMU) {
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
@@ -27,6 +27,7 @@
* @chip: chip identifier.
* @chiprev: chip revision.
* @cc_caps: chipcommon core capabilities.
+ * @cc_caps_ext: chipcommon core extended capabilities.
* @pmucaps: PMU capabilities.
* @pmurev: PMU revision.
* @rambase: RAM base address (only applicable for ARM CR4 chips).
@@ -38,6 +39,7 @@ struct brcmf_chip {
u32 chip;
u32 chiprev;
u32 cc_caps;
+ u32 cc_caps_ext;
u32 pmucaps;
u32 pmurev;
u32 rambase;

View File

@ -1,148 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 26 Jan 2016 17:57:04 +0100
Subject: [PATCH] brcmfmac: access PMU registers using standalone PMU core if
available
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On recent Broadcom chipsets PMU is present as separated core and it
can't be accessed using ChipCommon anymore as it fails with e.g.:
[ 18.198412] Unhandled fault: imprecise external abort (0x1406) at 0xb6da200f
Add a new helper function that will return a proper core that should be
used for accessing PMU registers.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -1014,6 +1014,7 @@ static int brcmf_chip_setup(struct brcmf
{
struct brcmf_chip *pub;
struct brcmf_core_priv *cc;
+ struct brcmf_core *pmu;
u32 base;
u32 val;
int ret = 0;
@@ -1030,9 +1031,10 @@ static int brcmf_chip_setup(struct brcmf
capabilities_ext));
/* get pmu caps & rev */
+ pmu = brcmf_chip_get_pmu(pub); /* after reading cc_caps_ext */
if (pub->cc_caps & CC_CAP_PMU) {
val = chip->ops->read32(chip->ctx,
- CORE_CC_REG(base, pmucapabilities));
+ CORE_CC_REG(pmu->base, pmucapabilities));
pub->pmurev = val & PCAP_REV_MASK;
pub->pmucaps = val;
}
@@ -1131,6 +1133,23 @@ struct brcmf_core *brcmf_chip_get_chipco
return &cc->pub;
}
+struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub)
+{
+ struct brcmf_core *cc = brcmf_chip_get_chipcommon(pub);
+ struct brcmf_core *pmu;
+
+ /* See if there is separated PMU core available */
+ if (cc->rev >= 35 &&
+ pub->cc_caps_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) {
+ pmu = brcmf_chip_get_core(pub, BCMA_CORE_PMU);
+ if (pmu)
+ return pmu;
+ }
+
+ /* Fallback to ChipCommon core for older hardware */
+ return cc;
+}
+
bool brcmf_chip_iscoreup(struct brcmf_core *pub)
{
struct brcmf_core_priv *core;
@@ -1301,6 +1320,7 @@ bool brcmf_chip_sr_capable(struct brcmf_
{
u32 base, addr, reg, pmu_cc3_mask = ~0;
struct brcmf_chip_priv *chip;
+ struct brcmf_core *pmu = brcmf_chip_get_pmu(pub);
brcmf_dbg(TRACE, "Enter\n");
@@ -1320,9 +1340,9 @@ bool brcmf_chip_sr_capable(struct brcmf_
case BRCM_CC_4335_CHIP_ID:
case BRCM_CC_4339_CHIP_ID:
/* read PMU chipcontrol register 3 */
- addr = CORE_CC_REG(base, chipcontrol_addr);
+ addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
chip->ops->write32(chip->ctx, addr, 3);
- addr = CORE_CC_REG(base, chipcontrol_data);
+ addr = CORE_CC_REG(pmu->base, chipcontrol_data);
reg = chip->ops->read32(chip->ctx, addr);
return (reg & pmu_cc3_mask) != 0;
case BRCM_CC_43430_CHIP_ID:
@@ -1330,12 +1350,12 @@ bool brcmf_chip_sr_capable(struct brcmf_
reg = chip->ops->read32(chip->ctx, addr);
return reg != 0;
default:
- addr = CORE_CC_REG(base, pmucapabilities_ext);
+ addr = CORE_CC_REG(pmu->base, pmucapabilities_ext);
reg = chip->ops->read32(chip->ctx, addr);
if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0)
return false;
- addr = CORE_CC_REG(base, retention_ctl);
+ addr = CORE_CC_REG(pmu->base, retention_ctl);
reg = chip->ops->read32(chip->ctx, addr);
return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h
@@ -85,6 +85,7 @@ struct brcmf_chip *brcmf_chip_attach(voi
void brcmf_chip_detach(struct brcmf_chip *chip);
struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *chip, u16 coreid);
struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *chip);
+struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub);
bool brcmf_chip_iscoreup(struct brcmf_core *core);
void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset);
void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3615,7 +3615,6 @@ brcmf_sdio_drivestrengthinit(struct brcm
const struct sdiod_drive_str *str_tab = NULL;
u32 str_mask;
u32 str_shift;
- u32 base;
u32 i;
u32 drivestrength_sel = 0;
u32 cc_data_temp;
@@ -3658,14 +3657,15 @@ brcmf_sdio_drivestrengthinit(struct brcm
}
if (str_tab != NULL) {
+ struct brcmf_core *pmu = brcmf_chip_get_pmu(ci);
+
for (i = 0; str_tab[i].strength != 0; i++) {
if (drivestrength >= str_tab[i].strength) {
drivestrength_sel = str_tab[i].sel;
break;
}
}
- base = brcmf_chip_get_chipcommon(ci)->base;
- addr = CORE_CC_REG(base, chipcontrol_addr);
+ addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
cc_data_temp &= ~str_mask;
@@ -3835,8 +3835,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
goto fail;
/* set PMUControl so a backplane reset does PMU state reload */
- reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base,
- pmucontrol);
+ reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
if (err)
goto fail;

View File

@ -1,38 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 26 Jan 2016 17:57:05 +0100
Subject: [PATCH] brcmfmac: add support for 14e4:4365 PCI ID with BCM4366
chipset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On Broadcom ARM routers BCM4366 cards are available with 14e4:4365 ID.
Unfortunately this ID was already used by Broadcom for cards with
BCM43142, a totally different chipset requiring SoftMAC driver. To avoid
a conflict between brcmfmac and bcma use more specific ID entry with
subvendor and subdevice specified.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1951,6 +1951,9 @@ static const struct dev_pm_ops brcmf_pci
#define BRCMF_PCIE_DEVICE(dev_id) { BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\
PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
+#define BRCMF_PCIE_DEVICE_SUB(dev_id, subvend, subdev) { \
+ BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\
+ subvend, subdev, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
static struct pci_device_id brcmf_pcie_devid_table[] = {
BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
@@ -1966,6 +1969,7 @@ static struct pci_device_id brcmf_pcie_d
BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_2G_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_5G_DEVICE_ID),
+ BRCMF_PCIE_DEVICE_SUB(0x4365, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4365),
BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID),

View File

@ -1,32 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sun, 31 Jan 2016 12:14:34 +0100
Subject: [PATCH] brcmfmac: treat NULL character in NVRAM as separator
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Platform NVRAM (stored on a flash partition) has entries separated by a
NULL (\0) char. Our parsing code switches from VALUE state to IDLE
whenever it meets a NULL (\0). When that happens our IDLE handler should
simply consume it and analyze whatever is placed ahead.
This fixes harmless warnings spamming debugging output:
[ 155.165624] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=20: ignoring invalid character
[ 155.180806] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=44: ignoring invalid character
[ 155.195971] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=63: ignoring invalid character
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -93,7 +93,7 @@ static enum nvram_parser_state brcmf_nvr
c = nvp->data[nvp->pos];
if (c == '\n')
return COMMENT;
- if (is_whitespace(c))
+ if (is_whitespace(c) || c == '\0')
goto proceed;
if (c == '#')
return COMMENT;

View File

@ -1,41 +0,0 @@
From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Date: Mon, 25 Jan 2016 11:47:29 +0100
Subject: [PATCH] brcmfmac: sdio: Increase the default timeouts a bit
On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems
the card responds very quickly most of the time, unfortunately during
initialisation it sometimes seems to take just a bit over 2 seconds to
respond.
This results intialization failing with message like:
brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52
brcmf_bus_start: failed: -52
brcmf_sdio_firmware_callback: dongle is not responding
Increasing the timeout to allow for a bit more headroom allows the
card to initialize reliably.
A quick search online after diagnosing/fixing this showed that Google
has a similar patch in their ChromeOS tree, so this doesn't seem
specific to the board I'm using.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -45,8 +45,8 @@
#include "chip.h"
#include "firmware.h"
-#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2000)
-#define CTL_DONE_TIMEOUT msecs_to_jiffies(2000)
+#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
+#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
#ifdef DEBUG

View File

@ -1,87 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 5 Feb 2016 09:45:50 +0800
Subject: [PATCH] ath9k: make NF load complete quickly and reliably
Make NF load complete quickly and reliably. NF load execution
is delayed by HW to end of frame if frame Rx or Tx is ongoing.
Increasing timeout to max frame duration. If NF cal is ongoing
before NF load, stop it before load, and restart it afterwards.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
struct ath_common *common = ath9k_hw_common(ah);
s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
+ u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL);
if (ah->caldata)
h = ah->caldata->nfCalHist;
@@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
}
/*
+ * stop NF cal if ongoing to ensure NF load completes immediately
+ * (or after end rx/tx frame if ongoing)
+ */
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+ REG_RMW_BUFFER_FLUSH(ah);
+ ENABLE_REG_RMW_BUFFER(ah);
+ }
+
+ /*
* Load software filtered NF value into baseband internal minCCApwr
* variable.
*/
@@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
/*
* Wait for load to complete, should be fast, a few 10s of us.
- * The max delay was changed from an original 250us to 10000us
- * since 250us often results in NF load timeout and causes deaf
- * condition during stress testing 12/12/2009
+ * The max delay was changed from an original 250us to 22.2 msec.
+ * This would increase timeout to the longest possible frame
+ * (11n max length 22.1 msec)
*/
- for (j = 0; j < 10000; j++) {
+ for (j = 0; j < 22200; j++) {
if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
- AR_PHY_AGC_CONTROL_NF) == 0)
+ AR_PHY_AGC_CONTROL_NF) == 0)
break;
udelay(10);
}
/*
+ * Restart NF so it can continue.
+ */
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
+ ENABLE_REG_RMW_BUFFER(ah);
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF)
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+ AR_PHY_AGC_CONTROL_ENABLE_NF);
+ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF)
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+ AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+ REG_RMW_BUFFER_FLUSH(ah);
+ }
+
+ /*
* We timed out waiting for the noisefloor to load, probably due to an
* in-progress rx. Simply return here and allow the load plenty of time
* to complete before the next calibration interval. We need to avoid
@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s
* here, the baseband nf cal will just be capped by our present
* noisefloor until the next calibration timer.
*/
- if (j == 10000) {
+ if (j == 22200) {
ath_dbg(common, ANY,
"Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
REG_READ(ah, AR_PHY_AGC_CONTROL));

View File

@ -1,54 +0,0 @@
From: Henning Rogge <hrogge@gmail.com>
Date: Wed, 3 Feb 2016 13:58:36 +0100
Subject: [PATCH] mac80211: Remove MPP table entries with MPath
Make the mesh_path_del() function remove all mpp table entries
that are proxied by the removed mesh path.
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -835,6 +835,29 @@ void mesh_path_flush_by_nexthop(struct s
rcu_read_unlock();
}
+static void mpp_flush_by_proxy(struct ieee80211_sub_if_data *sdata,
+ const u8 *proxy)
+{
+ struct mesh_table *tbl;
+ struct mesh_path *mpp;
+ struct mpath_node *node;
+ int i;
+
+ rcu_read_lock();
+ read_lock_bh(&pathtbl_resize_lock);
+ tbl = resize_dereference_mpp_paths();
+ for_each_mesh_entry(tbl, node, i) {
+ mpp = node->mpath;
+ if (ether_addr_equal(mpp->mpp, proxy)) {
+ spin_lock(&tbl->hashwlock[i]);
+ __mesh_path_del(tbl, node);
+ spin_unlock(&tbl->hashwlock[i]);
+ }
+ }
+ read_unlock_bh(&pathtbl_resize_lock);
+ rcu_read_unlock();
+}
+
static void table_flush_by_iface(struct mesh_table *tbl,
struct ieee80211_sub_if_data *sdata)
{
@@ -892,6 +915,9 @@ int mesh_path_del(struct ieee80211_sub_i
int hash_idx;
int err = 0;
+ /* flush relevant mpp entries first */
+ mpp_flush_by_proxy(sdata, addr);
+
read_lock_bh(&pathtbl_resize_lock);
tbl = resize_dereference_mesh_paths();
hash_idx = mesh_table_hash(addr, sdata, tbl);

View File

@ -1,104 +0,0 @@
From: Henning Rogge <hrogge@gmail.com>
Date: Wed, 3 Feb 2016 13:58:37 +0100
Subject: [PATCH] mac80211: let unused MPP table entries timeout
Remember the last time when a mpp table entry is used for
rx or tx and remove them after MESH_PATH_EXPIRE time.
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -942,6 +942,46 @@ enddel:
}
/**
+ * mpp_path_del - delete a mesh proxy path from the table
+ *
+ * @addr: addr address (ETH_ALEN length)
+ * @sdata: local subif
+ *
+ * Returns: 0 if successful
+ */
+static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
+{
+ struct mesh_table *tbl;
+ struct mesh_path *mpath;
+ struct mpath_node *node;
+ struct hlist_head *bucket;
+ int hash_idx;
+ int err = 0;
+
+ read_lock_bh(&pathtbl_resize_lock);
+ tbl = resize_dereference_mpp_paths();
+ hash_idx = mesh_table_hash(addr, sdata, tbl);
+ bucket = &tbl->hash_buckets[hash_idx];
+
+ spin_lock(&tbl->hashwlock[hash_idx]);
+ hlist_for_each_entry(node, bucket, list) {
+ mpath = node->mpath;
+ if (mpath->sdata == sdata &&
+ ether_addr_equal(addr, mpath->dst)) {
+ __mesh_path_del(tbl, node);
+ goto enddel;
+ }
+ }
+
+ err = -ENXIO;
+enddel:
+ mesh_paths_generation++;
+ spin_unlock(&tbl->hashwlock[hash_idx]);
+ read_unlock_bh(&pathtbl_resize_lock);
+ return err;
+}
+
+/**
* mesh_path_tx_pending - sends pending frames in a mesh path queue
*
* @mpath: mesh path to activate
@@ -1157,6 +1197,17 @@ void mesh_path_expire(struct ieee80211_s
time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE))
mesh_path_del(mpath->sdata, mpath->dst);
}
+
+ tbl = rcu_dereference(mpp_paths);
+ for_each_mesh_entry(tbl, node, i) {
+ if (node->mpath->sdata != sdata)
+ continue;
+ mpath = node->mpath;
+ if ((!(mpath->flags & MESH_PATH_FIXED)) &&
+ time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE))
+ mpp_path_del(mpath->sdata, mpath->dst);
+ }
+
rcu_read_unlock();
}
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2291,6 +2291,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
spin_lock_bh(&mppath->state_lock);
if (!ether_addr_equal(mppath->mpp, mpp_addr))
memcpy(mppath->mpp, mpp_addr, ETH_ALEN);
+ mppath->exp_time = jiffies;
spin_unlock_bh(&mppath->state_lock);
}
rcu_read_unlock();
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2171,8 +2171,11 @@ static struct sk_buff *ieee80211_build_h
mpp_lookup = true;
}
- if (mpp_lookup)
+ if (mpp_lookup) {
mppath = mpp_path_lookup(sdata, skb->data);
+ if (mppath)
+ mppath->exp_time = jiffies;
+ }
if (mppath && mpath)
mesh_path_del(mpath->sdata, mpath->dst);

View File

@ -1,143 +0,0 @@
From: Henning Rogge <hrogge@gmail.com>
Date: Wed, 3 Feb 2016 13:58:38 +0100
Subject: [PATCH] mac80211: Unify mesh and mpp path removal function
mpp_path_del() and mesh_path_del() are mostly the same function.
Move common code into a new static function.
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -55,16 +55,21 @@ int mpp_paths_generation;
static DEFINE_RWLOCK(pathtbl_resize_lock);
+static inline struct mesh_table *resize_dereference_paths(
+ struct mesh_table __rcu *table)
+{
+ return rcu_dereference_protected(table,
+ lockdep_is_held(&pathtbl_resize_lock));
+}
+
static inline struct mesh_table *resize_dereference_mesh_paths(void)
{
- return rcu_dereference_protected(mesh_paths,
- lockdep_is_held(&pathtbl_resize_lock));
+ return resize_dereference_paths(mesh_paths);
}
static inline struct mesh_table *resize_dereference_mpp_paths(void)
{
- return rcu_dereference_protected(mpp_paths,
- lockdep_is_held(&pathtbl_resize_lock));
+ return resize_dereference_paths(mpp_paths);
}
/*
@@ -899,14 +904,17 @@ void mesh_path_flush_by_iface(struct iee
}
/**
- * mesh_path_del - delete a mesh path from the table
+ * table_path_del - delete a path from the mesh or mpp table
*
- * @addr: dst address (ETH_ALEN length)
+ * @tbl: mesh or mpp path table
* @sdata: local subif
+ * @addr: dst address (ETH_ALEN length)
*
* Returns: 0 if successful
*/
-int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
+static int table_path_del(struct mesh_table __rcu *rcu_tbl,
+ struct ieee80211_sub_if_data *sdata,
+ const u8 *addr)
{
struct mesh_table *tbl;
struct mesh_path *mpath;
@@ -915,11 +923,7 @@ int mesh_path_del(struct ieee80211_sub_i
int hash_idx;
int err = 0;
- /* flush relevant mpp entries first */
- mpp_flush_by_proxy(sdata, addr);
-
- read_lock_bh(&pathtbl_resize_lock);
- tbl = resize_dereference_mesh_paths();
+ tbl = resize_dereference_paths(rcu_tbl);
hash_idx = mesh_table_hash(addr, sdata, tbl);
bucket = &tbl->hash_buckets[hash_idx];
@@ -935,9 +939,30 @@ int mesh_path_del(struct ieee80211_sub_i
err = -ENXIO;
enddel:
- mesh_paths_generation++;
spin_unlock(&tbl->hashwlock[hash_idx]);
+ return err;
+}
+
+/**
+ * mesh_path_del - delete a mesh path from the table
+ *
+ * @addr: dst address (ETH_ALEN length)
+ * @sdata: local subif
+ *
+ * Returns: 0 if successful
+ */
+int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
+{
+ int err = 0;
+
+ /* flush relevant mpp entries first */
+ mpp_flush_by_proxy(sdata, addr);
+
+ read_lock_bh(&pathtbl_resize_lock);
+ err = table_path_del(mesh_paths, sdata, addr);
+ mesh_paths_generation++;
read_unlock_bh(&pathtbl_resize_lock);
+
return err;
}
@@ -951,33 +976,13 @@ enddel:
*/
static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr)
{
- struct mesh_table *tbl;
- struct mesh_path *mpath;
- struct mpath_node *node;
- struct hlist_head *bucket;
- int hash_idx;
int err = 0;
read_lock_bh(&pathtbl_resize_lock);
- tbl = resize_dereference_mpp_paths();
- hash_idx = mesh_table_hash(addr, sdata, tbl);
- bucket = &tbl->hash_buckets[hash_idx];
-
- spin_lock(&tbl->hashwlock[hash_idx]);
- hlist_for_each_entry(node, bucket, list) {
- mpath = node->mpath;
- if (mpath->sdata == sdata &&
- ether_addr_equal(addr, mpath->dst)) {
- __mesh_path_del(tbl, node);
- goto enddel;
- }
- }
-
- err = -ENXIO;
-enddel:
- mesh_paths_generation++;
- spin_unlock(&tbl->hashwlock[hash_idx]);
+ err = table_path_del(mpp_paths, sdata, addr);
+ mpp_paths_generation++;
read_unlock_bh(&pathtbl_resize_lock);
+
return err;
}

View File

@ -1,51 +0,0 @@
From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Date: Tue, 2 Feb 2016 08:12:26 +0100
Subject: [PATCH] mac80211: minstrel: Change expected throughput unit back to
Kbps
The change from cur_tp to the function
minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the
current throughput. For example in minstrel_ht the correct
conversion between them would be:
mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..).
This factor 10 must also be included in the calculation of
minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to
return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing
algorithms like B.A.T.M.A.N. V will make incorrect decision based on these
values. Its kernel based implementation expects expected_throughput always
to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps].
The same requirement has iw or olsrdv2's nl80211 based statistics module
which retrieve the same data via NL80211_STA_INFO_TX_BITRATE.
Cc: stable@vger.kernel.org
Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function")
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -711,7 +711,7 @@ static u32 minstrel_get_expected_through
* computing cur_tp
*/
tmp_mrs = &mi->r[idx].stats;
- tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma);
+ tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma) * 10;
tmp_cur_tp = tmp_cur_tp * 1200 * 8 / 1024;
return tmp_cur_tp;
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -1335,7 +1335,8 @@ static u32 minstrel_ht_get_expected_thro
prob = mi->groups[i].rates[j].prob_ewma;
/* convert tp_avg from pkt per second in kbps */
- tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * AVG_PKT_SIZE * 8 / 1024;
+ tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * 10;
+ tp_avg = tp_avg * AVG_PKT_SIZE * 8 / 1024;
return tp_avg;
}

View File

@ -1,307 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sun, 7 Feb 2016 18:08:24 +0100
Subject: [PATCH] brcmfmac: Increase nr of supported flowrings.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
New generation devices have firmware which has more than 256 flowrings.
E.g. following debugging message comes from 14e4:4365 BCM4366:
[ 194.606245] brcmfmac: brcmf_pcie_init_ringbuffers Nr of flowrings is 264
At various code places (related to flowrings) we were using u8 which
could lead to storing wrong number or infinite loops when indexing with
this type. This issue was quite easy to spot in brcmf_flowring_detach
where it led to infinite loop e.g. on failed initialization.
This patch switches code to proper types and increases the maximum
number of supported flowrings to 512.
Originally this change was sent in September 2015, but back it was
causing a regression on BCM43602 resulting in:
Unable to handle kernel NULL pointer dereference at virtual address ...
The reason for this regression was missing update (s/u8/u16) of struct
brcmf_flowring_ring. This problem was handled in 9f64df9 ("brcmfmac: Fix
bug in flowring management."). Starting with that it's safe to apply
this original patch as it doesn't cause a regression anymore.
This patch fixes an infinite loop on BCM4366 which is supported since
4.4 so it makes sense to apply it to stable 4.4+.
Cc: <stable@vger.kernel.org> # 4.4+
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c
@@ -32,7 +32,7 @@
#define BRCMF_FLOWRING_LOW (BRCMF_FLOWRING_HIGH - 256)
#define BRCMF_FLOWRING_INVALID_IFIDX 0xff
-#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] + fifo + ifidx * 16)
+#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] * 2 + fifo + ifidx * 16)
#define BRCMF_FLOWRING_HASH_STA(fifo, ifidx) (fifo + ifidx * 16)
static const u8 brcmf_flowring_prio2fifo[] = {
@@ -68,7 +68,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f
u8 prio, u8 ifidx)
{
struct brcmf_flowring_hash *hash;
- u8 hash_idx;
+ u16 hash_idx;
u32 i;
bool found;
bool sta;
@@ -88,6 +88,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f
}
hash_idx = sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) :
BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx);
+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
found = false;
hash = flow->hash;
for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) {
@@ -98,6 +99,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f
break;
}
hash_idx++;
+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
}
if (found)
return hash[hash_idx].flowid;
@@ -111,7 +113,7 @@ u32 brcmf_flowring_create(struct brcmf_f
{
struct brcmf_flowring_ring *ring;
struct brcmf_flowring_hash *hash;
- u8 hash_idx;
+ u16 hash_idx;
u32 i;
bool found;
u8 fifo;
@@ -131,6 +133,7 @@ u32 brcmf_flowring_create(struct brcmf_f
}
hash_idx = sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) :
BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx);
+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
found = false;
hash = flow->hash;
for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) {
@@ -140,6 +143,7 @@ u32 brcmf_flowring_create(struct brcmf_f
break;
}
hash_idx++;
+ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1);
}
if (found) {
for (i = 0; i < flow->nrofrings; i++) {
@@ -169,7 +173,7 @@ u32 brcmf_flowring_create(struct brcmf_f
}
-u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid)
+u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid)
{
struct brcmf_flowring_ring *ring;
@@ -179,7 +183,7 @@ u8 brcmf_flowring_tid(struct brcmf_flowr
}
-static void brcmf_flowring_block(struct brcmf_flowring *flow, u8 flowid,
+static void brcmf_flowring_block(struct brcmf_flowring *flow, u16 flowid,
bool blocked)
{
struct brcmf_flowring_ring *ring;
@@ -228,10 +232,10 @@ static void brcmf_flowring_block(struct
}
-void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid)
+void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid)
{
struct brcmf_flowring_ring *ring;
- u8 hash_idx;
+ u16 hash_idx;
struct sk_buff *skb;
ring = flow->rings[flowid];
@@ -253,7 +257,7 @@ void brcmf_flowring_delete(struct brcmf_
}
-u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid,
struct sk_buff *skb)
{
struct brcmf_flowring_ring *ring;
@@ -279,7 +283,7 @@ u32 brcmf_flowring_enqueue(struct brcmf_
}
-struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid)
+struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid)
{
struct brcmf_flowring_ring *ring;
struct sk_buff *skb;
@@ -300,7 +304,7 @@ struct sk_buff *brcmf_flowring_dequeue(s
}
-void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
+void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid,
struct sk_buff *skb)
{
struct brcmf_flowring_ring *ring;
@@ -311,7 +315,7 @@ void brcmf_flowring_reinsert(struct brcm
}
-u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid)
+u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid)
{
struct brcmf_flowring_ring *ring;
@@ -326,7 +330,7 @@ u32 brcmf_flowring_qlen(struct brcmf_flo
}
-void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid)
+void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid)
{
struct brcmf_flowring_ring *ring;
@@ -340,10 +344,10 @@ void brcmf_flowring_open(struct brcmf_fl
}
-u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid)
+u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid)
{
struct brcmf_flowring_ring *ring;
- u8 hash_idx;
+ u16 hash_idx;
ring = flow->rings[flowid];
hash_idx = ring->hash_id;
@@ -384,7 +388,7 @@ void brcmf_flowring_detach(struct brcmf_
struct brcmf_pub *drvr = bus_if->drvr;
struct brcmf_flowring_tdls_entry *search;
struct brcmf_flowring_tdls_entry *remove;
- u8 flowid;
+ u16 flowid;
for (flowid = 0; flowid < flow->nrofrings; flowid++) {
if (flow->rings[flowid])
@@ -408,7 +412,7 @@ void brcmf_flowring_configure_addr_mode(
struct brcmf_bus *bus_if = dev_get_drvdata(flow->dev);
struct brcmf_pub *drvr = bus_if->drvr;
u32 i;
- u8 flowid;
+ u16 flowid;
if (flow->addr_mode[ifidx] != addr_mode) {
for (i = 0; i < ARRAY_SIZE(flow->hash); i++) {
@@ -434,7 +438,7 @@ void brcmf_flowring_delete_peer(struct b
struct brcmf_flowring_tdls_entry *prev;
struct brcmf_flowring_tdls_entry *search;
u32 i;
- u8 flowid;
+ u16 flowid;
bool sta;
sta = (flow->addr_mode[ifidx] == ADDR_INDIRECT);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h
@@ -16,7 +16,7 @@
#define BRCMFMAC_FLOWRING_H
-#define BRCMF_FLOWRING_HASHSIZE 256
+#define BRCMF_FLOWRING_HASHSIZE 512 /* has to be 2^x */
#define BRCMF_FLOWRING_INVALID_ID 0xFFFFFFFF
@@ -24,7 +24,7 @@ struct brcmf_flowring_hash {
u8 mac[ETH_ALEN];
u8 fifo;
u8 ifidx;
- u8 flowid;
+ u16 flowid;
};
enum ring_status {
@@ -61,16 +61,16 @@ u32 brcmf_flowring_lookup(struct brcmf_f
u8 prio, u8 ifidx);
u32 brcmf_flowring_create(struct brcmf_flowring *flow, u8 da[ETH_ALEN],
u8 prio, u8 ifidx);
-void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid);
-void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid);
-u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid);
-u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid,
+void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid);
+void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid);
+u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid);
+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid,
struct sk_buff *skb);
-struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid);
-void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid,
+struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid);
+void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid,
struct sk_buff *skb);
-u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid);
-u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid);
+u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid);
+u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid);
struct brcmf_flowring *brcmf_flowring_attach(struct device *dev, u16 nrofrings);
void brcmf_flowring_detach(struct brcmf_flowring *flow);
void brcmf_flowring_configure_addr_mode(struct brcmf_flowring *flow, int ifidx,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -677,7 +677,7 @@ static u32 brcmf_msgbuf_flowring_create(
}
-static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u8 flowid)
+static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid)
{
struct brcmf_flowring *flow = msgbuf->flow;
struct brcmf_commonring *commonring;
@@ -1310,7 +1310,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct
}
-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid)
+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid)
{
struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
struct msgbuf_tx_flowring_delete_req *delete;
@@ -1415,6 +1415,13 @@ int brcmf_proto_msgbuf_attach(struct brc
u32 count;
if_msgbuf = drvr->bus_if->msgbuf;
+
+ if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
+ brcmf_err("driver not configured for this many flowrings %d\n",
+ if_msgbuf->nrof_flowrings);
+ if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
+ }
+
msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL);
if (!msgbuf)
goto fail;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
@@ -33,7 +33,7 @@
int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid);
int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr);
void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr);
#else

View File

@ -1,22 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 8 Feb 2016 14:24:36 +0100
Subject: [PATCH] cfg80211: fix faulty variable initialization in
ieee80211_amsdu_to_8023s
reuse_skb is set to true if the code decides to use the last segment.
Fixes a memory leak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -676,7 +676,7 @@ void ieee80211_amsdu_to_8023s(struct sk_
u8 *payload;
int offset = 0, remaining, err;
struct ethhdr eth;
- bool reuse_skb = true;
+ bool reuse_skb = false;
bool last = false;
if (has_80211_header) {

View File

@ -1,132 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 8 Feb 2016 14:33:19 +0100
Subject: [PATCH] cfg80211: reuse existing page fragments in A-MSDU rx
This massively reduces data copying and thus improves rx performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -644,23 +644,93 @@ int ieee80211_data_from_8023(struct sk_b
}
EXPORT_SYMBOL(ieee80211_data_from_8023);
+static void
+__frame_add_frag(struct sk_buff *skb, struct page *page,
+ void *ptr, int len, int size)
+{
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ int page_offset;
+
+ atomic_inc(&page->_count);
+ page_offset = ptr - page_address(page);
+ skb_add_rx_frag(skb, sh->nr_frags, page, page_offset, len, size);
+}
+
+static void
+__ieee80211_amsdu_copy_frag(struct sk_buff *skb, struct sk_buff *frame,
+ int offset, int len)
+{
+ struct skb_shared_info *sh = skb_shinfo(skb);
+ const skb_frag_t *frag = &sh->frags[-1];
+ struct page *frag_page;
+ void *frag_ptr;
+ int frag_len, frag_size;
+ int head_size = skb->len - skb->data_len;
+ int cur_len;
+
+ frag_page = virt_to_head_page(skb->head);
+ frag_ptr = skb->data;
+ frag_size = head_size;
+
+ while (offset >= frag_size) {
+ offset -= frag_size;
+ frag++;
+ frag_page = skb_frag_page(frag);
+ frag_ptr = skb_frag_address(frag);
+ frag_size = skb_frag_size(frag);
+ }
+
+ frag_ptr += offset;
+ frag_len = frag_size - offset;
+
+ cur_len = min(len, frag_len);
+
+ __frame_add_frag(frame, frag_page, frag_ptr, cur_len, frag_size);
+ len -= cur_len;
+
+ while (len > 0) {
+ frag++;
+ frag_len = skb_frag_size(frag);
+ cur_len = min(len, frag_len);
+ __frame_add_frag(frame, skb_frag_page(frag),
+ skb_frag_address(frag), cur_len, frag_len);
+ len -= cur_len;
+ }
+}
+
static struct sk_buff *
__ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen,
- int offset, int len)
+ int offset, int len, bool reuse_frag)
{
struct sk_buff *frame;
+ int cur_len = len;
if (skb->len - offset < len)
return NULL;
/*
+ * When reusing framents, copy some data to the head to simplify
+ * ethernet header handling and speed up protocol header processing
+ * in the stack later.
+ */
+ if (reuse_frag)
+ cur_len = min_t(int, len, 32);
+
+ /*
* Allocate and reserve two bytes more for payload
* alignment since sizeof(struct ethhdr) is 14.
*/
- frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len);
+ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len);
skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
- skb_copy_bits(skb, offset, skb_put(frame, len), len);
+ skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len);
+
+ len -= cur_len;
+ if (!len)
+ return frame;
+
+ offset += cur_len;
+ __ieee80211_amsdu_copy_frag(skb, frame, offset, len);
return frame;
}
@@ -676,6 +746,7 @@ void ieee80211_amsdu_to_8023s(struct sk_
u8 *payload;
int offset = 0, remaining, err;
struct ethhdr eth;
+ bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb);
bool reuse_skb = false;
bool last = false;
@@ -703,12 +774,13 @@ void ieee80211_amsdu_to_8023s(struct sk_
offset += sizeof(struct ethhdr);
/* reuse skb for the last subframe */
last = remaining <= subframe_len + padding;
- if (!skb_is_nonlinear(skb) && last) {
+ if (!skb_is_nonlinear(skb) && !reuse_frag && last) {
skb_pull(skb, offset);
frame = skb;
reuse_skb = true;
} else {
- frame = __ieee80211_amsdu_copy(skb, hlen, offset, len);
+ frame = __ieee80211_amsdu_copy(skb, hlen, offset, len,
+ reuse_frag);
if (!frame)
goto purge;

View File

@ -1,36 +0,0 @@
From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Wed, 10 Feb 2016 16:08:17 +0100
Subject: [PATCH] mac80211: fix wiphy supported_band access
Fix wiphy supported_band access in tx radiotap parsing. In particular,
info->band is always set to 0 (IEEE80211_BAND_2GHZ) since it has not
assigned yet. This cause a kernel crash on 5GHz only devices.
Move ieee80211_parse_tx_radiotap() after info->band assignment
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1890,10 +1890,6 @@ netdev_tx_t ieee80211_monitor_start_xmit
info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
IEEE80211_TX_CTL_INJECTED;
- /* process and remove the injection radiotap header */
- if (!ieee80211_parse_tx_radiotap(local, skb))
- goto fail;
-
rcu_read_lock();
/*
@@ -1955,6 +1951,10 @@ netdev_tx_t ieee80211_monitor_start_xmit
goto fail_rcu;
info->band = chandef->chan->band;
+ /* process and remove the injection radiotap header */
+ if (!ieee80211_parse_tx_radiotap(local, skb))
+ goto fail_rcu;
+
ieee80211_xmit(sdata, NULL, skb);
rcu_read_unlock();

View File

@ -1,61 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 18 Feb 2016 19:30:05 +0100
Subject: [PATCH] mac80211: minstrel_ht: set A-MSDU tx limits based on selected
max_prob_rate
Prevents excessive A-MSDU aggregation at low data rates or bad
conditions.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -883,6 +883,39 @@ minstrel_ht_set_rate(struct minstrel_pri
ratetbl->rate[offset].flags = flags;
}
+static int
+minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi)
+{
+ int group = mi->max_prob_rate / MCS_GROUP_RATES;
+ const struct mcs_group *g = &minstrel_mcs_groups[group];
+ int rate = mi->max_prob_rate % MCS_GROUP_RATES;
+
+ /* Disable A-MSDU if max_prob_rate is bad */
+ if (mi->groups[group].rates[rate].prob_ewma < MINSTREL_FRAC(50, 100))
+ return 1;
+
+ /* If the rate is slower than single-stream MCS1, make A-MSDU limit small */
+ if (g->duration[rate] > MCS_DURATION(1, 0, 52))
+ return 500;
+
+ /*
+ * If the rate is slower than single-stream MCS4, limit A-MSDU to usual
+ * data packet size
+ */
+ if (g->duration[rate] > MCS_DURATION(1, 0, 104))
+ return 1500;
+
+ /*
+ * If the rate is slower than single-stream MCS7, limit A-MSDU to twice
+ * the usual data packet size
+ */
+ if (g->duration[rate] > MCS_DURATION(1, 0, 260))
+ return 3000;
+
+ /* unlimited */
+ return 0;
+}
+
static void
minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
{
@@ -907,6 +940,7 @@ minstrel_ht_update_rates(struct minstrel
minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate);
}
+ mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi);
rates->rate[i].idx = -1;
rate_control_set_rates(mp->hw, mi->sta, rates);
}

View File

@ -1,31 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 18 Feb 2016 19:45:33 +0100
Subject: [PATCH] mac80211: minstrel_ht: set default tx aggregation timeout to
0
The value 5000 was put here with the addition of the timeout field to
ieee80211_start_tx_ba_session. It was originally added in mac80211 to
save resources for drivers like iwlwifi, which only supports a limited
number of concurrent aggregation sessions.
Since iwlwifi does not use minstrel_ht and other drivers don't need
this, 0 is a better default - especially since there have been
recent reports of aggregation setup related issues reproduced with
ath9k. This should improve stability without causing any adverse
effects.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -692,7 +692,7 @@ minstrel_aggr_check(struct ieee80211_sta
if (likely(sta->ampdu_mlme.tid_tx[tid]))
return;
- ieee80211_start_tx_ba_session(pubsta, tid, 5000);
+ ieee80211_start_tx_ba_session(pubsta, tid, 0);
}
static void

View File

@ -1,26 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 24 Feb 2016 12:03:13 +0100
Subject: [PATCH] mac80211: minstrel_ht: fix a logic error in RTS/CTS handling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's
a dual-stream rate and the sta is in dynamic SMPS mode.
Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS")
Reported-by: Matías Richart <mrichart@fing.edu.uy>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -872,7 +872,7 @@ minstrel_ht_set_rate(struct minstrel_pri
* - if station is in dynamic SMPS (and streams > 1)
* - for fallback rates, to increase chances of getting through
*/
- if (offset > 0 &&
+ if (offset > 0 ||
(mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC &&
group->streams > 1)) {
ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts;

View File

@ -1,35 +0,0 @@
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue, 1 Mar 2016 00:29:00 +0200
Subject: [PATCH] mac80211: Fix Public Action frame RX in AP mode
Public Action frames use special rules for how the BSSID field (Address
3) is set. A wildcard BSSID is used in cases where the transmitter and
recipient are not members of the same BSS. As such, we need to accept
Public Action frames with wildcard BSSID.
Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when
operating as AP") added a rule that drops Action frames to TDLS-peers
based on an Action frame having different DA (Address 1) and BSSID
(Address 3) values. This is not correct since it misses the possibility
of BSSID being a wildcard BSSID in which case the Address 1 would not
necessarily match.
Fix this by allowing mac80211 to accept wildcard BSSID in an Action
frame when in AP mode.
Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP")
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3374,6 +3374,7 @@ static bool ieee80211_accept_frame(struc
return false;
/* ignore action frames to TDLS-peers */
if (ieee80211_is_action(hdr->frame_control) &&
+ !is_broadcast_ether_addr(bssid) &&
!ether_addr_equal(bssid, hdr->addr1))
return false;
}

View File

@ -1,21 +0,0 @@
From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Fri, 19 Feb 2016 11:43:04 +0100
Subject: [PATCH] cfg80211: add radiotap VHT info to rtap_namespace_sizes
Add IEEE80211_RADIOTAP_VHT entry to rtap_namespace_sizes array in order to
define alignment and size of VHT info in tx radiotap
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/wireless/radiotap.c
+++ b/net/wireless/radiotap.c
@@ -43,6 +43,7 @@ static const struct radiotap_align_size
[IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, },
[IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, },
[IEEE80211_RADIOTAP_AMPDU_STATUS] = { .align = 4, .size = 8, },
+ [IEEE80211_RADIOTAP_VHT] = { .align = 2, .size = 12, },
/*
* add more here as they are defined in radiotap.h
*/

View File

@ -1,36 +0,0 @@
From: Sven Eckelmann <sven@narfation.org>
Date: Wed, 24 Feb 2016 16:25:49 +0100
Subject: [PATCH] mac80211: fix parsing of 40Mhz in injected radiotap
header
The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2
bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if
the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be
confused with IEEE80211_RADIOTAP_MCS_BW_20U.
Fixes: 5ec3aed9ba4c ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1689,7 +1689,7 @@ static bool ieee80211_parse_tx_radiotap(
bool rate_found = false;
u8 rate_retries = 0;
u16 rate_flags = 0;
- u8 mcs_known, mcs_flags;
+ u8 mcs_known, mcs_flags, mcs_bw;
int i;
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
@@ -1765,8 +1765,9 @@ static bool ieee80211_parse_tx_radiotap(
mcs_flags & IEEE80211_RADIOTAP_MCS_SGI)
rate_flags |= IEEE80211_TX_RC_SHORT_GI;
+ mcs_bw = mcs_flags & IEEE80211_RADIOTAP_MCS_BW_MASK;
if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW &&
- mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40)
+ mcs_bw == IEEE80211_RADIOTAP_MCS_BW_40)
rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
break;

View File

@ -1,65 +0,0 @@
From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Tue, 23 Feb 2016 15:43:35 +0100
Subject: [PATCH] mac80211: parse VHT info in injected frames
Add VHT radiotap parsing support to ieee80211_parse_tx_radiotap().
That capability has been tested using a d-link dir-860l rev b1 running
OpenWrt trunk and mt76 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1690,6 +1690,8 @@ static bool ieee80211_parse_tx_radiotap(
u8 rate_retries = 0;
u16 rate_flags = 0;
u8 mcs_known, mcs_flags, mcs_bw;
+ u16 vht_known;
+ u8 vht_mcs = 0, vht_nss = 0;
int i;
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
@@ -1771,6 +1773,32 @@ static bool ieee80211_parse_tx_radiotap(
rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
break;
+ case IEEE80211_RADIOTAP_VHT:
+ vht_known = get_unaligned_le16(iterator.this_arg);
+ rate_found = true;
+
+ rate_flags = IEEE80211_TX_RC_VHT_MCS;
+ if ((vht_known & IEEE80211_RADIOTAP_VHT_KNOWN_GI) &&
+ (iterator.this_arg[2] &
+ IEEE80211_RADIOTAP_VHT_FLAG_SGI))
+ rate_flags |= IEEE80211_TX_RC_SHORT_GI;
+ if (vht_known &
+ IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH) {
+ if (iterator.this_arg[3] == 1)
+ rate_flags |=
+ IEEE80211_TX_RC_40_MHZ_WIDTH;
+ else if (iterator.this_arg[3] == 4)
+ rate_flags |=
+ IEEE80211_TX_RC_80_MHZ_WIDTH;
+ else if (iterator.this_arg[3] == 11)
+ rate_flags |=
+ IEEE80211_TX_RC_160_MHZ_WIDTH;
+ }
+
+ vht_mcs = iterator.this_arg[4] >> 4;
+ vht_nss = iterator.this_arg[4] & 0xF;
+ break;
+
/*
* Please update the file
* Documentation/networking/mac80211-injection.txt
@@ -1796,6 +1824,9 @@ static bool ieee80211_parse_tx_radiotap(
if (rate_flags & IEEE80211_TX_RC_MCS) {
info->control.rates[0].idx = rate;
+ } else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) {
+ ieee80211_rate_set_vht(info->control.rates, vht_mcs,
+ vht_nss);
} else {
for (i = 0; i < sband->n_bitrates; i++) {
if (rate * 5 != sband->bitrates[i].bitrate)

View File

@ -1,23 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 2 Mar 2016 15:51:40 +0100
Subject: [PATCH] mac80211: do not pass injected frames without a valid rate to
the driver
Fall back to rate control if the requested bitrate was not found.
Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1837,6 +1837,9 @@ static bool ieee80211_parse_tx_radiotap(
}
}
+ if (info->control.rates[0].idx < 0)
+ info->control.flags &= ~IEEE80211_TX_CTRL_RATE_INJECT;
+
info->control.rates[0].flags = rate_flags;
info->control.rates[0].count = min_t(u8, rate_retries + 1,
local->hw.max_rate_tries);

View File

@ -1,77 +0,0 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 3 Mar 2016 23:20:06 +0100
Subject: [PATCH] mac80211: minstrel_ht: improve sample rate skip logic
There were a few issues that were slowing down the process of finding
the optimal rate, especially on devices with multi-rate retry
limitations:
When max_tp_rate[0] was slower than max_tp_rate[1], the code did not
sample max_tp_rate[1], which would often allow it to switch places with
max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the
rate is otherwise good).
Also, sample attempts of rates between max_tp_rate[0] and [1] were being
ignored in this case, because the code only checked if the rate was
slower than [1].
Fix this by checking against the fastest / second fastest max_tp_rate
instead of assuming a specific order between the two.
In my tests this patch significantly reduces the time until minstrel_ht
finds the optimal rate right after assoc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -958,6 +958,7 @@ minstrel_get_sample_rate(struct minstrel
struct minstrel_rate_stats *mrs;
struct minstrel_mcs_group_data *mg;
unsigned int sample_dur, sample_group, cur_max_tp_streams;
+ int tp_rate1, tp_rate2;
int sample_idx = 0;
if (mi->sample_wait > 0) {
@@ -979,14 +980,22 @@ minstrel_get_sample_rate(struct minstrel
mrs = &mg->rates[sample_idx];
sample_idx += sample_group * MCS_GROUP_RATES;
+ /* Set tp_rate1, tp_rate2 to the highest / second highest max_tp_rate */
+ if (minstrel_get_duration(mi->max_tp_rate[0]) >
+ minstrel_get_duration(mi->max_tp_rate[1])) {
+ tp_rate1 = mi->max_tp_rate[1];
+ tp_rate2 = mi->max_tp_rate[0];
+ } else {
+ tp_rate1 = mi->max_tp_rate[0];
+ tp_rate2 = mi->max_tp_rate[1];
+ }
+
/*
* Sampling might add some overhead (RTS, no aggregation)
- * to the frame. Hence, don't use sampling for the currently
- * used rates.
+ * to the frame. Hence, don't use sampling for the highest currently
+ * used highest throughput or probability rate.
*/
- if (sample_idx == mi->max_tp_rate[0] ||
- sample_idx == mi->max_tp_rate[1] ||
- sample_idx == mi->max_prob_rate)
+ if (sample_idx == mi->max_tp_rate[0] || sample_idx == mi->max_prob_rate)
return -1;
/*
@@ -1001,10 +1010,10 @@ minstrel_get_sample_rate(struct minstrel
* if the link is working perfectly.
*/
- cur_max_tp_streams = minstrel_mcs_groups[mi->max_tp_rate[0] /
+ cur_max_tp_streams = minstrel_mcs_groups[tp_rate1 /
MCS_GROUP_RATES].streams;
sample_dur = minstrel_get_duration(sample_idx);
- if (sample_dur >= minstrel_get_duration(mi->max_tp_rate[1]) &&
+ if (sample_dur >= minstrel_get_duration(tp_rate2) &&
(cur_max_tp_streams - 1 <
minstrel_mcs_groups[sample_group].streams ||
sample_dur >= minstrel_get_duration(mi->max_prob_rate))) {

View File

@ -1,99 +0,0 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:50 +0100
Subject: [PATCH] brcmfmac: change function name for
brcmf_cfg80211_wait_vif_event_timeout()
Dropping the '_timeout' from the function name as the fact that a timeout
value is passed makes it obvious a timeout is used. Also helps to keep code
lines a bit shorter and easier to stick to 80 char boundary.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -564,8 +564,8 @@ struct wireless_dev *brcmf_ap_add_vif(st
}
/* wait for firmware event */
- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD,
- BRCMF_VIF_EVENT_TIMEOUT);
+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_ADD,
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (!err) {
brcmf_err("timeout occurred\n");
@@ -6395,8 +6395,9 @@ bool brcmf_cfg80211_vif_event_armed(stru
return armed;
}
-int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg,
- u8 action, ulong timeout)
+
+int brcmf_cfg80211_wait_vif_event(struct brcmf_cfg80211_info *cfg,
+ u8 action, ulong timeout)
{
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -402,8 +402,8 @@ bool brcmf_get_vif_state_any(struct brcm
void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg,
struct brcmf_cfg80211_vif *vif);
bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg);
-int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg,
- u8 action, ulong timeout);
+int brcmf_cfg80211_wait_vif_event(struct brcmf_cfg80211_info *cfg,
+ u8 action, ulong timeout);
s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
struct brcmf_if *ifp, bool aborted,
bool fw_abort);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1988,8 +1988,8 @@ int brcmf_p2p_ifchange(struct brcmf_cfg8
brcmf_cfg80211_arm_vif_event(cfg, NULL);
return err;
}
- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_CHANGE,
- BRCMF_VIF_EVENT_TIMEOUT);
+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_CHANGE,
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (!err) {
brcmf_err("No BRCMF_E_IF_CHANGE event received\n");
@@ -2090,8 +2090,8 @@ static struct wireless_dev *brcmf_p2p_cr
}
/* wait for firmware event */
- err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD,
- BRCMF_VIF_EVENT_TIMEOUT);
+ err = brcmf_cfg80211_wait_vif_event(p2p->cfg, BRCMF_E_IF_ADD,
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
brcmf_fweh_p2pdev_setup(pri_ifp, false);
if (!err) {
@@ -2180,8 +2180,8 @@ struct wireless_dev *brcmf_p2p_add_vif(s
}
/* wait for firmware event */
- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD,
- BRCMF_VIF_EVENT_TIMEOUT);
+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_ADD,
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (!err) {
brcmf_err("timeout occurred\n");
@@ -2274,8 +2274,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
}
if (!err) {
/* wait for firmware event */
- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL,
- BRCMF_VIF_EVENT_TIMEOUT);
+ err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL,
+ BRCMF_VIF_EVENT_TIMEOUT);
if (!err)
err = -EIO;
else

View File

@ -1,127 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:51 +0100
Subject: [PATCH] brcmfmac: Limit memory allocs to <64K
Some systems have problems with allocating memory allocation larger
then 64K. Often on unload/load or suspend/resume a failure is
reported: Could not allocate wiphy device. This patch makes the
escan intermediate storage buf dynamically allocated, and smaller
than 64K.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1125,7 +1125,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy
/* Arm scan timeout timer */
mod_timer(&cfg->escan_timeout, jiffies +
- WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
+ BRCMF_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
return 0;
@@ -3020,7 +3020,7 @@ brcmf_cfg80211_escan_handler(struct brcm
list = (struct brcmf_scan_results *)
cfg->escan_info.escan_buf;
- if (bi_length > WL_ESCAN_BUF_SIZE - list->buflen) {
+ if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) {
brcmf_err("Buffer is too small: ignoring\n");
goto exit;
}
@@ -3033,8 +3033,8 @@ brcmf_cfg80211_escan_handler(struct brcm
bss_info_le))
goto exit;
}
- memcpy(&(cfg->escan_info.escan_buf[list->buflen]),
- bss_info_le, bi_length);
+ memcpy(&cfg->escan_info.escan_buf[list->buflen], bss_info_le,
+ bi_length);
list->version = le32_to_cpu(bss_info_le->version);
list->buflen += bi_length;
list->count++;
@@ -5402,14 +5402,14 @@ static void brcmf_deinit_priv_mem(struct
{
kfree(cfg->conf);
cfg->conf = NULL;
- kfree(cfg->escan_ioctl_buf);
- cfg->escan_ioctl_buf = NULL;
kfree(cfg->extra_buf);
cfg->extra_buf = NULL;
kfree(cfg->wowl.nd);
cfg->wowl.nd = NULL;
kfree(cfg->wowl.nd_info);
cfg->wowl.nd_info = NULL;
+ kfree(cfg->escan_info.escan_buf);
+ cfg->escan_info.escan_buf = NULL;
}
static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg)
@@ -5417,9 +5417,6 @@ static s32 brcmf_init_priv_mem(struct br
cfg->conf = kzalloc(sizeof(*cfg->conf), GFP_KERNEL);
if (!cfg->conf)
goto init_priv_mem_out;
- cfg->escan_ioctl_buf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
- if (!cfg->escan_ioctl_buf)
- goto init_priv_mem_out;
cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
if (!cfg->extra_buf)
goto init_priv_mem_out;
@@ -5431,6 +5428,9 @@ static s32 brcmf_init_priv_mem(struct br
GFP_KERNEL);
if (!cfg->wowl.nd_info)
goto init_priv_mem_out;
+ cfg->escan_info.escan_buf = kzalloc(BRCMF_ESCAN_BUF_SIZE, GFP_KERNEL);
+ if (!cfg->escan_info.escan_buf)
+ goto init_priv_mem_out;
return 0;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -28,8 +28,11 @@
#define WL_ROAM_TRIGGER_LEVEL -75
#define WL_ROAM_DELTA 20
-#define WL_ESCAN_BUF_SIZE (1024 * 64)
-#define WL_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */
+/* Keep BRCMF_ESCAN_BUF_SIZE below 64K (65536). Allocing over 64K can be
+ * problematic on some systems and should be avoided.
+ */
+#define BRCMF_ESCAN_BUF_SIZE 65000
+#define BRCMF_ESCAN_TIMER_INTERVAL_MS 10000 /* E-Scan timeout */
#define WL_ESCAN_ACTION_START 1
#define WL_ESCAN_ACTION_CONTINUE 2
@@ -205,7 +208,7 @@ enum wl_escan_state {
struct escan_info {
u32 escan_state;
- u8 escan_buf[WL_ESCAN_BUF_SIZE];
+ u8 *escan_buf;
struct wiphy *wiphy;
struct brcmf_if *ifp;
s32 (*run)(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
@@ -278,7 +281,6 @@ struct brcmf_cfg80211_wowl {
* @escan_info: escan information.
* @escan_timeout: Timer for catch scan timeout.
* @escan_timeout_work: scan timeout worker.
- * @escan_ioctl_buf: dongle command buffer for escan commands.
* @vif_list: linked list of vif instances.
* @vif_cnt: number of vif instances.
* @vif_event: vif event signalling.
@@ -309,7 +311,6 @@ struct brcmf_cfg80211_info {
struct escan_info escan_info;
struct timer_list escan_timeout;
struct work_struct escan_timeout_work;
- u8 *escan_ioctl_buf;
struct list_head vif_list;
struct brcmf_cfg80211_vif_event vif_event;
struct completion vif_disabled;

View File

@ -1,29 +0,0 @@
From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:52 +0100
Subject: [PATCH] brcmfmac: check for wowl support before enumerating feature
flag
In some cases wiphy->wowlan could be NULL if firmware doesn't have the
support. Driver should check for support before walking down the feature
flags.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6594,7 +6594,8 @@ struct brcmf_cfg80211_info *brcmf_cfg802
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_RANDOM_MAC)) {
wiphy->features |= NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR;
#ifdef CONFIG_PM
- if (wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT)
+ if (wiphy->wowlan &&
+ wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT)
wiphy->features |= NL80211_FEATURE_ND_RANDOM_MAC_ADDR;
#endif
}

View File

@ -1,214 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:53 +0100
Subject: [PATCH] brcmfmac: Configure country code using device specific
settings
Country code configuration in a device is a device specific
operation. For this the country code as specified by reg notifier
(iso3166 alpha2) needs to be translated to a device specific
country locale and revision number. This patch adds this
translation and puts a placeholder in the device specific settings
where the translation table can be stored. Additional patches will
be needed to read these tables from for example device platform
data.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6405,28 +6405,85 @@ int brcmf_cfg80211_wait_vif_event(struct
vif_event_equals(event, action), timeout);
}
+static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
+ struct brcmf_fil_country_le *ccreq)
+{
+ struct cc_translate *country_codes;
+ struct cc_entry *cc;
+ s32 found_index;
+ int i;
+
+ country_codes = drvr->settings->country_codes;
+ if (!country_codes) {
+ brcmf_dbg(TRACE, "No country codes configured for device\n");
+ return -EINVAL;
+ }
+
+ if ((alpha2[0] == ccreq->country_abbrev[0]) &&
+ (alpha2[1] == ccreq->country_abbrev[1])) {
+ brcmf_dbg(TRACE, "Country code already set\n");
+ return -EAGAIN;
+ }
+
+ found_index = -1;
+ for (i = 0; i < country_codes->table_size; i++) {
+ cc = &country_codes->table[i];
+ if ((cc->iso3166[0] == '\0') && (found_index == -1))
+ found_index = i;
+ if ((cc->iso3166[0] == alpha2[0]) &&
+ (cc->iso3166[1] == alpha2[1])) {
+ found_index = i;
+ break;
+ }
+ }
+ if (found_index == -1) {
+ brcmf_dbg(TRACE, "No country code match found\n");
+ return -EINVAL;
+ }
+ memset(ccreq, 0, sizeof(*ccreq));
+ ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev);
+ memcpy(ccreq->ccode, country_codes->table[found_index].cc,
+ BRCMF_COUNTRY_BUF_SZ);
+ ccreq->country_abbrev[0] = alpha2[0];
+ ccreq->country_abbrev[1] = alpha2[1];
+ ccreq->country_abbrev[2] = 0;
+
+ return 0;
+}
+
static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy,
struct regulatory_request *req)
{
struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
struct brcmf_fil_country_le ccreq;
+ s32 err;
int i;
- brcmf_dbg(TRACE, "enter: initiator=%d, alpha=%c%c\n", req->initiator,
- req->alpha2[0], req->alpha2[1]);
-
/* ignore non-ISO3166 country codes */
for (i = 0; i < sizeof(req->alpha2); i++)
if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
- brcmf_err("not a ISO3166 code\n");
+ brcmf_err("not a ISO3166 code (0x%02x 0x%02x)\n",
+ req->alpha2[0], req->alpha2[1]);
return;
}
- memset(&ccreq, 0, sizeof(ccreq));
- ccreq.rev = cpu_to_le32(-1);
- memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
- if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
- brcmf_err("firmware rejected country setting\n");
+
+ brcmf_dbg(TRACE, "Enter: initiator=%d, alpha=%c%c\n", req->initiator,
+ req->alpha2[0], req->alpha2[1]);
+
+ err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq));
+ if (err) {
+ brcmf_err("Country code iovar returned err = %d\n", err);
+ return;
+ }
+
+ err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq);
+ if (err)
+ return;
+
+ err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
+ if (err) {
+ brcmf_err("Firmware rejected country setting\n");
return;
}
brcmf_setup_wiphybands(wiphy);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -230,10 +230,8 @@ void brcmf_mp_attach(void)
int brcmf_mp_device_attach(struct brcmf_pub *drvr)
{
drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
- if (!drvr->settings) {
- brcmf_err("Failed to alloca storage space for settings\n");
+ if (!drvr->settings)
return -ENOMEM;
- }
drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz;
drvr->settings->p2p_enable = !!brcmf_p2p_enable;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -15,6 +15,8 @@
#ifndef BRCMFMAC_COMMON_H
#define BRCMFMAC_COMMON_H
+#include "fwil_types.h"
+
extern const u8 ALLFFMAC[ETH_ALEN];
#define BRCMF_FW_ALTPATH_LEN 256
@@ -39,6 +41,33 @@ struct brcmf_mp_global_t {
extern struct brcmf_mp_global_t brcmf_mp_global;
/**
+ * struct cc_entry - Struct for translating user space country code (iso3166) to
+ * firmware country code and revision.
+ *
+ * @iso3166: iso3166 alpha 2 country code string.
+ * @cc: firmware country code string.
+ * @rev: firmware country code revision.
+ */
+struct cc_entry {
+ char iso3166[BRCMF_COUNTRY_BUF_SZ];
+ char cc[BRCMF_COUNTRY_BUF_SZ];
+ s32 rev;
+};
+
+/**
+ * struct cc_translate - Struct for translating country codes as set by user
+ * space to a country code and rev which can be used by
+ * firmware.
+ *
+ * @table_size: number of entries in table (> 0)
+ * @table: dynamic array of 1 or more elements with translation information.
+ */
+struct cc_translate {
+ int table_size;
+ struct cc_entry table[0];
+};
+
+/**
* struct brcmf_mp_device - Device module paramaters.
*
* @sdiod_txglomsz: SDIO txglom size.
@@ -47,6 +76,7 @@ extern struct brcmf_mp_global_t brcmf_mp
* @feature_disable: Feature_disable bitmask.
* @fcmode: FWS flow control.
* @roamoff: Firmware roaming off?
+ * @country_codes: If available, pointer to struct for translating country codes
*/
struct brcmf_mp_device {
int sdiod_txglomsz;
@@ -56,6 +86,7 @@ struct brcmf_mp_device {
int fcmode;
bool roamoff;
bool ignore_probe_fail;
+ struct cc_translate *country_codes;
};
void brcmf_mp_attach(void);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -134,6 +134,8 @@
#define BRCMF_PFN_MAC_OUI_ONLY BIT(0)
#define BRCMF_PFN_SET_MAC_UNASSOC BIT(1)
+#define BRCMF_MCSSET_LEN 16
+
/* join preference types for join_pref iovar */
enum brcmf_join_pref_types {
BRCMF_JOIN_PREF_RSSI = 1,
@@ -279,7 +281,7 @@ struct brcmf_bss_info_le {
__le32 reserved32[1]; /* Reserved for expansion of BSS properties */
u8 flags; /* flags */
u8 reserved[3]; /* Reserved for expansion of BSS properties */
- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
+ u8 basic_mcs[BRCMF_MCSSET_LEN]; /* 802.11N BSS required MCS set */
__le16 ie_offset; /* offset at which IEs start, from beginning */
__le32 ie_length; /* byte length of Information Elements */

View File

@ -1,283 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:54 +0100
Subject: [PATCH] brcmfmac: Add length checks on firmware events
Add additional length checks on firmware events to create more
robust code.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Lei Zhang <leizh@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3092,6 +3092,11 @@ brcmf_notify_sched_scan_results(struct b
brcmf_dbg(SCAN, "Enter\n");
+ if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
+ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
+ return 0;
+ }
+
if (e->event_code == BRCMF_E_PFN_NET_LOST) {
brcmf_dbg(SCAN, "PFN NET LOST event. Do Nothing\n");
return 0;
@@ -3415,6 +3420,11 @@ brcmf_wowl_nd_results(struct brcmf_if *i
brcmf_dbg(SCAN, "Enter\n");
+ if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) {
+ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
+ return 0;
+ }
+
pfn_result = (struct brcmf_pno_scanresults_le *)data;
if (e->event_code == BRCMF_E_PFN_NET_LOST) {
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
@@ -26,50 +26,6 @@
#include "fwil.h"
/**
- * struct brcm_ethhdr - broadcom specific ether header.
- *
- * @subtype: subtype for this packet.
- * @length: TODO: length of appended data.
- * @version: version indication.
- * @oui: OUI of this packet.
- * @usr_subtype: subtype for this OUI.
- */
-struct brcm_ethhdr {
- __be16 subtype;
- __be16 length;
- u8 version;
- u8 oui[3];
- __be16 usr_subtype;
-} __packed;
-
-struct brcmf_event_msg_be {
- __be16 version;
- __be16 flags;
- __be32 event_type;
- __be32 status;
- __be32 reason;
- __be32 auth_type;
- __be32 datalen;
- u8 addr[ETH_ALEN];
- char ifname[IFNAMSIZ];
- u8 ifidx;
- u8 bsscfgidx;
-} __packed;
-
-/**
- * struct brcmf_event - contents of broadcom event packet.
- *
- * @eth: standard ether header.
- * @hdr: broadcom specific ether header.
- * @msg: common part of the actual event message.
- */
-struct brcmf_event {
- struct ethhdr eth;
- struct brcm_ethhdr hdr;
- struct brcmf_event_msg_be msg;
-} __packed;
-
-/**
* struct brcmf_fweh_queue_item - event item on event queue.
*
* @q: list element for queuing.
@@ -85,6 +41,7 @@ struct brcmf_fweh_queue_item {
u8 ifidx;
u8 ifaddr[ETH_ALEN];
struct brcmf_event_msg_be emsg;
+ u32 datalen;
u8 data[0];
};
@@ -294,6 +251,11 @@ static void brcmf_fweh_event_worker(stru
brcmf_dbg_hex_dump(BRCMF_EVENT_ON(), event->data,
min_t(u32, emsg.datalen, 64),
"event payload, len=%d\n", emsg.datalen);
+ if (emsg.datalen > event->datalen) {
+ brcmf_err("event invalid length header=%d, msg=%d\n",
+ event->datalen, emsg.datalen);
+ goto event_free;
+ }
/* special handling of interface event */
if (event->code == BRCMF_E_IF) {
@@ -439,7 +401,8 @@ int brcmf_fweh_activate_events(struct br
* dispatch the event to a registered handler (using worker).
*/
void brcmf_fweh_process_event(struct brcmf_pub *drvr,
- struct brcmf_event *event_packet)
+ struct brcmf_event *event_packet,
+ u32 packet_len)
{
enum brcmf_fweh_event_code code;
struct brcmf_fweh_info *fweh = &drvr->fweh;
@@ -459,6 +422,9 @@ void brcmf_fweh_process_event(struct brc
if (code != BRCMF_E_IF && !fweh->evt_handler[code])
return;
+ if (datalen > BRCMF_DCMD_MAXLEN)
+ return;
+
if (in_interrupt())
alloc_flag = GFP_ATOMIC;
@@ -472,6 +438,7 @@ void brcmf_fweh_process_event(struct brc
/* use memcpy to get aligned event message */
memcpy(&event->emsg, &event_packet->msg, sizeof(event->emsg));
memcpy(event->data, data, datalen);
+ event->datalen = datalen;
memcpy(event->ifaddr, event_packet->eth.h_dest, ETH_ALEN);
brcmf_fweh_queue_event(fweh, event);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
@@ -27,7 +27,6 @@
struct brcmf_pub;
struct brcmf_if;
struct brcmf_cfg80211_info;
-struct brcmf_event;
/* list of firmware events */
#define BRCMF_FWEH_EVENT_ENUM_DEFLIST \
@@ -180,13 +179,55 @@ enum brcmf_fweh_event_code {
/**
* definitions for event packet validation.
*/
-#define BRCMF_EVENT_OUI_OFFSET 19
-#define BRCM_OUI "\x00\x10\x18"
-#define DOT11_OUI_LEN 3
-#define BCMILCP_BCM_SUBTYPE_EVENT 1
+#define BRCM_OUI "\x00\x10\x18"
+#define BCMILCP_BCM_SUBTYPE_EVENT 1
/**
+ * struct brcm_ethhdr - broadcom specific ether header.
+ *
+ * @subtype: subtype for this packet.
+ * @length: TODO: length of appended data.
+ * @version: version indication.
+ * @oui: OUI of this packet.
+ * @usr_subtype: subtype for this OUI.
+ */
+struct brcm_ethhdr {
+ __be16 subtype;
+ __be16 length;
+ u8 version;
+ u8 oui[3];
+ __be16 usr_subtype;
+} __packed;
+
+struct brcmf_event_msg_be {
+ __be16 version;
+ __be16 flags;
+ __be32 event_type;
+ __be32 status;
+ __be32 reason;
+ __be32 auth_type;
+ __be32 datalen;
+ u8 addr[ETH_ALEN];
+ char ifname[IFNAMSIZ];
+ u8 ifidx;
+ u8 bsscfgidx;
+} __packed;
+
+/**
+ * struct brcmf_event - contents of broadcom event packet.
+ *
+ * @eth: standard ether header.
+ * @hdr: broadcom specific ether header.
+ * @msg: common part of the actual event message.
+ */
+struct brcmf_event {
+ struct ethhdr eth;
+ struct brcm_ethhdr hdr;
+ struct brcmf_event_msg_be msg;
+} __packed;
+
+/**
* struct brcmf_event_msg - firmware event message.
*
* @version: version information.
@@ -256,34 +297,35 @@ void brcmf_fweh_unregister(struct brcmf_
enum brcmf_fweh_event_code code);
int brcmf_fweh_activate_events(struct brcmf_if *ifp);
void brcmf_fweh_process_event(struct brcmf_pub *drvr,
- struct brcmf_event *event_packet);
+ struct brcmf_event *event_packet,
+ u32 packet_len);
void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing);
static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr,
struct sk_buff *skb)
{
struct brcmf_event *event_packet;
- u8 *data;
u16 usr_stype;
/* only process events when protocol matches */
if (skb->protocol != cpu_to_be16(ETH_P_LINK_CTL))
return;
+ if ((skb->len + ETH_HLEN) < sizeof(*event_packet))
+ return;
+
/* check for BRCM oui match */
event_packet = (struct brcmf_event *)skb_mac_header(skb);
- data = (u8 *)event_packet;
- data += BRCMF_EVENT_OUI_OFFSET;
- if (memcmp(BRCM_OUI, data, DOT11_OUI_LEN))
+ if (memcmp(BRCM_OUI, &event_packet->hdr.oui[0],
+ sizeof(event_packet->hdr.oui)))
return;
/* final match on usr_subtype */
- data += DOT11_OUI_LEN;
- usr_stype = get_unaligned_be16(data);
+ usr_stype = get_unaligned_be16(&event_packet->hdr.usr_subtype);
if (usr_stype != BCMILCP_BCM_SUBTYPE_EVENT)
return;
- brcmf_fweh_process_event(drvr, event_packet);
+ brcmf_fweh_process_event(drvr, event_packet, skb->len + ETH_HLEN);
}
#endif /* FWEH_H_ */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1361,6 +1361,11 @@ int brcmf_p2p_notify_action_frame_rx(str
u16 mgmt_type;
u8 action;
+ if (e->datalen < sizeof(*rxframe)) {
+ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
+ return 0;
+ }
+
ch.chspec = be16_to_cpu(rxframe->chanspec);
cfg->d11inf.decchspec(&ch);
/* Check if wpa_supplicant has registered for this frame */
@@ -1858,6 +1863,11 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
brcmf_dbg(INFO, "Enter: event %d reason %d\n", e->event_code,
e->reason);
+ if (e->datalen < sizeof(*rxframe)) {
+ brcmf_dbg(SCAN, "Event data to small. Ignore\n");
+ return 0;
+ }
+
ch.chspec = be16_to_cpu(rxframe->chanspec);
cfg->d11inf.decchspec(&ch);

View File

@ -1,333 +0,0 @@
From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:55 +0100
Subject: [PATCH] brcmfmac: add neighbor discovery offload ip address table
configuration
Configure ipv6 address for neighbor discovery offload ip table in
firmware obtained through ipv6 address notification callback.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -456,7 +456,7 @@ send_key_to_dongle(struct brcmf_if *ifp,
}
static s32
-brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable)
+brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable)
{
s32 err;
u32 mode;
@@ -484,6 +484,15 @@ brcmf_configure_arp_offload(struct brcmf
enable, mode);
}
+ err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable);
+ if (err) {
+ brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n",
+ enable, err);
+ err = 0;
+ } else
+ brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n",
+ enable, mode);
+
return err;
}
@@ -3543,7 +3552,7 @@ static s32 brcmf_cfg80211_resume(struct
brcmf_report_wowl_wakeind(wiphy, ifp);
brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
- brcmf_configure_arp_offload(ifp, true);
+ brcmf_configure_arp_nd_offload(ifp, true);
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
cfg->wowl.pre_pmmode);
cfg->wowl.active = false;
@@ -3567,7 +3576,7 @@ static void brcmf_configure_wowl(struct
brcmf_dbg(TRACE, "Suspend, wowl config.\n");
- brcmf_configure_arp_offload(ifp, false);
+ brcmf_configure_arp_nd_offload(ifp, false);
brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode);
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX);
@@ -4336,7 +4345,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
if (!mbss) {
brcmf_set_mpc(ifp, 0);
- brcmf_configure_arp_offload(ifp, false);
+ brcmf_configure_arp_nd_offload(ifp, false);
}
/* find the RSN_IE */
@@ -4482,7 +4491,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
exit:
if ((err) && (!mbss)) {
brcmf_set_mpc(ifp, 1);
- brcmf_configure_arp_offload(ifp, true);
+ brcmf_configure_arp_nd_offload(ifp, true);
}
return err;
}
@@ -4540,7 +4549,7 @@ static int brcmf_cfg80211_stop_ap(struct
brcmf_err("bss_enable config failed %d\n", err);
}
brcmf_set_mpc(ifp, 1);
- brcmf_configure_arp_offload(ifp, true);
+ brcmf_configure_arp_nd_offload(ifp, true);
clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
brcmf_net_setcarrier(ifp, false);
@@ -6287,7 +6296,7 @@ static s32 brcmf_config_dongle(struct br
if (err)
goto default_conf_out;
- brcmf_configure_arp_offload(ifp, true);
+ brcmf_configure_arp_nd_offload(ifp, true);
cfg->dongle_up = true;
default_conf_out:
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -20,6 +20,8 @@
#include <linux/inetdevice.h>
#include <net/cfg80211.h>
#include <net/rtnetlink.h>
+#include <net/addrconf.h>
+#include <net/ipv6.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
@@ -172,6 +174,35 @@ _brcmf_set_mac_address(struct work_struc
}
}
+#if IS_ENABLED(CONFIG_IPV6)
+static void _brcmf_update_ndtable(struct work_struct *work)
+{
+ struct brcmf_if *ifp;
+ int i, ret;
+
+ ifp = container_of(work, struct brcmf_if, ndoffload_work);
+
+ /* clear the table in firmware */
+ ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip_clear", NULL, 0);
+ if (ret) {
+ brcmf_dbg(TRACE, "fail to clear nd ip table err:%d\n", ret);
+ return;
+ }
+
+ for (i = 0; i < ifp->ipv6addr_idx; i++) {
+ ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip",
+ &ifp->ipv6_addr_tbl[i],
+ sizeof(struct in6_addr));
+ if (ret)
+ brcmf_err("add nd ip err %d\n", ret);
+ }
+}
+#else
+static void _brcmf_update_ndtable(struct work_struct *work)
+{
+}
+#endif
+
static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr)
{
struct brcmf_if *ifp = netdev_priv(ndev);
@@ -685,6 +716,7 @@ int brcmf_net_attach(struct brcmf_if *if
INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address);
INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list);
+ INIT_WORK(&ifp->ndoffload_work, _brcmf_update_ndtable);
if (rtnl_locked)
err = register_netdevice(ndev);
@@ -884,6 +916,7 @@ static void brcmf_del_if(struct brcmf_pu
if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
cancel_work_sync(&ifp->setmacaddr_work);
cancel_work_sync(&ifp->multicast_work);
+ cancel_work_sync(&ifp->ndoffload_work);
}
brcmf_net_detach(ifp->ndev);
} else {
@@ -1025,6 +1058,56 @@ static int brcmf_inetaddr_changed(struct
}
#endif
+#if IS_ENABLED(CONFIG_IPV6)
+static int brcmf_inet6addr_changed(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct brcmf_pub *drvr = container_of(nb, struct brcmf_pub,
+ inet6addr_notifier);
+ struct inet6_ifaddr *ifa = data;
+ struct brcmf_if *ifp;
+ int i;
+ struct in6_addr *table;
+
+ /* Only handle primary interface */
+ ifp = drvr->iflist[0];
+ if (!ifp)
+ return NOTIFY_DONE;
+ if (ifp->ndev != ifa->idev->dev)
+ return NOTIFY_DONE;
+
+ table = ifp->ipv6_addr_tbl;
+ for (i = 0; i < NDOL_MAX_ENTRIES; i++)
+ if (ipv6_addr_equal(&ifa->addr, &table[i]))
+ break;
+
+ switch (action) {
+ case NETDEV_UP:
+ if (i == NDOL_MAX_ENTRIES) {
+ if (ifp->ipv6addr_idx < NDOL_MAX_ENTRIES) {
+ table[ifp->ipv6addr_idx++] = ifa->addr;
+ } else {
+ for (i = 0; i < NDOL_MAX_ENTRIES - 1; i++)
+ table[i] = table[i + 1];
+ table[NDOL_MAX_ENTRIES - 1] = ifa->addr;
+ }
+ }
+ break;
+ case NETDEV_DOWN:
+ if (i < NDOL_MAX_ENTRIES)
+ for (; i < ifp->ipv6addr_idx; i++)
+ table[i] = table[i + 1];
+ break;
+ default:
+ break;
+ }
+
+ schedule_work(&ifp->ndoffload_work);
+
+ return NOTIFY_OK;
+}
+#endif
+
int brcmf_attach(struct device *dev)
{
struct brcmf_pub *drvr = NULL;
@@ -1164,30 +1247,41 @@ int brcmf_bus_start(struct device *dev)
#ifdef CONFIG_INET
drvr->inetaddr_notifier.notifier_call = brcmf_inetaddr_changed;
ret = register_inetaddr_notifier(&drvr->inetaddr_notifier);
+ if (ret)
+ goto fail;
+
+#if IS_ENABLED(CONFIG_IPV6)
+ drvr->inet6addr_notifier.notifier_call = brcmf_inet6addr_changed;
+ ret = register_inet6addr_notifier(&drvr->inet6addr_notifier);
+ if (ret) {
+ unregister_inetaddr_notifier(&drvr->inetaddr_notifier);
+ goto fail;
+ }
#endif
+#endif /* CONFIG_INET */
+
+ return 0;
fail:
- if (ret < 0) {
- brcmf_err("failed: %d\n", ret);
- if (drvr->config) {
- brcmf_cfg80211_detach(drvr->config);
- drvr->config = NULL;
- }
- if (drvr->fws) {
- brcmf_fws_del_interface(ifp);
- brcmf_fws_deinit(drvr);
- }
- if (ifp)
- brcmf_net_detach(ifp->ndev);
- if (p2p_ifp)
- brcmf_net_detach(p2p_ifp->ndev);
- drvr->iflist[0] = NULL;
- drvr->iflist[1] = NULL;
- if (brcmf_ignoring_probe_fail(drvr))
- ret = 0;
- return ret;
+ brcmf_err("failed: %d\n", ret);
+ if (drvr->config) {
+ brcmf_cfg80211_detach(drvr->config);
+ drvr->config = NULL;
+ }
+ if (drvr->fws) {
+ brcmf_fws_del_interface(ifp);
+ brcmf_fws_deinit(drvr);
}
- return 0;
+ if (ifp)
+ brcmf_net_detach(ifp->ndev);
+ if (p2p_ifp)
+ brcmf_net_detach(p2p_ifp->ndev);
+ drvr->iflist[0] = NULL;
+ drvr->iflist[1] = NULL;
+ if (brcmf_ignoring_probe_fail(drvr))
+ ret = 0;
+
+ return ret;
}
void brcmf_bus_add_txhdrlen(struct device *dev, uint len)
@@ -1237,6 +1331,10 @@ void brcmf_detach(struct device *dev)
unregister_inetaddr_notifier(&drvr->inetaddr_notifier);
#endif
+#if IS_ENABLED(CONFIG_IPV6)
+ unregister_inet6addr_notifier(&drvr->inet6addr_notifier);
+#endif
+
/* stop firmware event handling */
brcmf_fweh_detach(drvr);
if (drvr->config)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -48,6 +48,8 @@
*/
#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
+#define NDOL_MAX_ENTRIES 8
+
/**
* struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
*
@@ -143,6 +145,7 @@ struct brcmf_pub {
#endif
struct notifier_block inetaddr_notifier;
+ struct notifier_block inet6addr_notifier;
struct brcmf_mp_device *settings;
};
@@ -175,6 +178,7 @@ enum brcmf_netif_stop_reason {
* @stats: interface specific network statistics.
* @setmacaddr_work: worker object for setting mac address.
* @multicast_work: worker object for multicast provisioning.
+ * @ndoffload_work: worker object for neighbor discovery offload configuration.
* @fws_desc: interface specific firmware-signalling descriptor.
* @ifidx: interface index in device firmware.
* @bsscfgidx: index of bss associated with this interface.
@@ -191,6 +195,7 @@ struct brcmf_if {
struct net_device_stats stats;
struct work_struct setmacaddr_work;
struct work_struct multicast_work;
+ struct work_struct ndoffload_work;
struct brcmf_fws_mac_descriptor *fws_desc;
int ifidx;
s32 bsscfgidx;
@@ -199,6 +204,8 @@ struct brcmf_if {
spinlock_t netif_stop_lock;
atomic_t pend_8021x_cnt;
wait_queue_head_t pend_8021x_wait;
+ struct in6_addr ipv6_addr_tbl[NDOL_MAX_ENTRIES];
+ u8 ipv6addr_idx;
};
struct brcmf_skb_reorder_data {

View File

@ -1,38 +0,0 @@
From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:56 +0100
Subject: [PATCH] brcmfmac: check return for ARP ip setting iovar
The return value of iovar set function should be saved and checked.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -1039,14 +1039,14 @@ static int brcmf_inetaddr_changed(struct
return NOTIFY_OK;
}
for (i = 0; i < ARPOL_MAX_ENTRIES; i++) {
- if (addr_table[i] != 0) {
- brcmf_fil_iovar_data_set(ifp,
- "arp_hostip", &addr_table[i],
- sizeof(addr_table[i]));
- if (ret)
- brcmf_err("add arp ip err %d\n",
- ret);
- }
+ if (addr_table[i] == 0)
+ continue;
+ ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip",
+ &addr_table[i],
+ sizeof(addr_table[i]));
+ if (ret)
+ brcmf_err("add arp ip err %d\n",
+ ret);
}
}
break;

View File

@ -1,73 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:57 +0100
Subject: [PATCH] brcmfmac: use device memsize config from fw if defined
Newer type pcie devices have memory which get shared between fw and
hw. The division of this memory is done firmware compile time. As a
result the ramsize as used by driver needs to be adjusted for this.
This is done by reading the memory size from the firmware.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -207,6 +207,10 @@ static struct brcmf_firmware_mapping brc
#define BRCMF_PCIE_CFGREG_REG_BAR3_CONFIG 0x4F4
#define BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB 3
+/* Magic number at a magic location to find RAM size */
+#define BRCMF_RAMSIZE_MAGIC 0x534d4152 /* SMAR */
+#define BRCMF_RAMSIZE_OFFSET 0x6c
+
struct brcmf_pcie_console {
u32 base_addr;
@@ -1412,6 +1416,28 @@ static const struct brcmf_bus_ops brcmf_
};
+static void
+brcmf_pcie_adjust_ramsize(struct brcmf_pciedev_info *devinfo, u8 *data,
+ u32 data_len)
+{
+ __le32 *field;
+ u32 newsize;
+
+ if (data_len < BRCMF_RAMSIZE_OFFSET + 8)
+ return;
+
+ field = (__le32 *)&data[BRCMF_RAMSIZE_OFFSET];
+ if (le32_to_cpup(field) != BRCMF_RAMSIZE_MAGIC)
+ return;
+ field++;
+ newsize = le32_to_cpup(field);
+
+ brcmf_dbg(PCIE, "Found ramsize info in FW, adjusting to 0x%x\n",
+ newsize);
+ devinfo->ci->ramsize = newsize;
+}
+
+
static int
brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
u32 sharedram_addr)
@@ -1694,6 +1720,13 @@ static void brcmf_pcie_setup(struct devi
brcmf_pcie_attach(devinfo);
+ /* Some of the firmwares have the size of the memory of the device
+ * defined inside the firmware. This is because part of the memory in
+ * the device is shared and the devision is determined by FW. Parse
+ * the firmware and adjust the chip memory size now.
+ */
+ brcmf_pcie_adjust_ramsize(devinfo, (u8 *)fw->data, fw->size);
+
ret = brcmf_pcie_download_fw_nvram(devinfo, fw, nvram, nvram_len);
if (ret)
goto fail;

View File

@ -1,58 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:58 +0100
Subject: [PATCH] brcmfmac: use bar1 window size as provided by pci subsystem
The PCIE bar1 window size is specified by chip. Currently the
ioremap of bar1 was using a define which always matched the size
of bar1, but newer chips can have a different bar1 sizes. With
this patch the ioremap will be called with the by chip provided
window size.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -72,7 +72,6 @@ static struct brcmf_firmware_mapping brc
#define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */
-#define BRCMF_PCIE_TCM_MAP_SIZE (4096 * 1024)
#define BRCMF_PCIE_REG_MAP_SIZE (32 * 1024)
/* backplane addres space accessed by BAR0 */
@@ -252,7 +251,6 @@ struct brcmf_pciedev_info {
char nvram_name[BRCMF_FW_NAME_LEN];
void __iomem *regs;
void __iomem *tcm;
- u32 tcm_size;
u32 ram_base;
u32 ram_size;
struct brcmf_chip *ci;
@@ -1592,8 +1590,7 @@ static int brcmf_pcie_get_resource(struc
}
devinfo->regs = ioremap_nocache(bar0_addr, BRCMF_PCIE_REG_MAP_SIZE);
- devinfo->tcm = ioremap_nocache(bar1_addr, BRCMF_PCIE_TCM_MAP_SIZE);
- devinfo->tcm_size = BRCMF_PCIE_TCM_MAP_SIZE;
+ devinfo->tcm = ioremap_nocache(bar1_addr, bar1_size);
if (!devinfo->regs || !devinfo->tcm) {
brcmf_err("ioremap() failed (%p,%p)\n", devinfo->regs,
@@ -1602,8 +1599,9 @@ static int brcmf_pcie_get_resource(struc
}
brcmf_dbg(PCIE, "Phys addr : reg space = %p base addr %#016llx\n",
devinfo->regs, (unsigned long long)bar0_addr);
- brcmf_dbg(PCIE, "Phys addr : mem space = %p base addr %#016llx\n",
- devinfo->tcm, (unsigned long long)bar1_addr);
+ brcmf_dbg(PCIE, "Phys addr : mem space = %p base addr %#016llx size 0x%x\n",
+ devinfo->tcm, (unsigned long long)bar1_addr,
+ (unsigned int)bar1_size);
return 0;
}

View File

@ -1,34 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:59 +0100
Subject: [PATCH] brcmfmac: add support for the PCIE 4366c0 chip
A newer version of the 4366 PCIE chip has been released. Add
support for this version of the chip.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -53,6 +53,7 @@ BRCMF_FW_NVRAM_DEF(4358, "brcmfmac4358-p
BRCMF_FW_NVRAM_DEF(4359, "brcmfmac4359-pcie.bin", "brcmfmac4359-pcie.txt");
BRCMF_FW_NVRAM_DEF(4365B, "brcmfmac4365b-pcie.bin", "brcmfmac4365b-pcie.txt");
BRCMF_FW_NVRAM_DEF(4366B, "brcmfmac4366b-pcie.bin", "brcmfmac4366b-pcie.txt");
+BRCMF_FW_NVRAM_DEF(4366C, "brcmfmac4366c-pcie.bin", "brcmfmac4366c-pcie.txt");
BRCMF_FW_NVRAM_DEF(4371, "brcmfmac4371-pcie.bin", "brcmfmac4371-pcie.txt");
static struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = {
@@ -66,7 +67,8 @@ static struct brcmf_firmware_mapping brc
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4358_CHIP_ID, 0xFFFFFFFF, 4358),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4365_CHIP_ID, 0xFFFFFFFF, 4365B),
- BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0xFFFFFFFF, 4366B),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0x0000000F, 4366B),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0xFFFFFFF0, 4366C),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4371_CHIP_ID, 0xFFFFFFFF, 4371),
};

View File

@ -1,221 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:00 +0100
Subject: [PATCH] brcmfmac: remove pcie gen1 support
The PCIE bus driver supports older gen1 (v1) chips, but there is no
actual device which is using this older pcie core which is supported
by brcmfmac. Remove all gen1 related code.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -100,9 +100,6 @@ static struct brcmf_firmware_mapping brc
#define BRCMF_PCIE_PCIE2REG_CONFIGDATA 0x124
#define BRCMF_PCIE_PCIE2REG_H2D_MAILBOX 0x140
-#define BRCMF_PCIE_GENREV1 1
-#define BRCMF_PCIE_GENREV2 2
-
#define BRCMF_PCIE2_INTA 0x01
#define BRCMF_PCIE2_INTB 0x02
@@ -257,9 +254,7 @@ struct brcmf_pciedev_info {
u32 ram_size;
struct brcmf_chip *ci;
u32 coreid;
- u32 generic_corerev;
struct brcmf_pcie_shared_info shared;
- void (*ringbell)(struct brcmf_pciedev_info *devinfo);
wait_queue_head_t mbdata_resp_wait;
bool mbdata_completed;
bool irq_allocated;
@@ -746,68 +741,22 @@ static void brcmf_pcie_bus_console_read(
}
-static __used void brcmf_pcie_ringbell_v1(struct brcmf_pciedev_info *devinfo)
-{
- u32 reg_value;
-
- brcmf_dbg(PCIE, "RING !\n");
- reg_value = brcmf_pcie_read_reg32(devinfo,
- BRCMF_PCIE_PCIE2REG_MAILBOXINT);
- reg_value |= BRCMF_PCIE2_INTB;
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
- reg_value);
-}
-
-
-static void brcmf_pcie_ringbell_v2(struct brcmf_pciedev_info *devinfo)
-{
- brcmf_dbg(PCIE, "RING !\n");
- /* Any arbitrary value will do, lets use 1 */
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1);
-}
-
-
static void brcmf_pcie_intr_disable(struct brcmf_pciedev_info *devinfo)
{
- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1)
- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTMASK,
- 0);
- else
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK,
- 0);
+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK, 0);
}
static void brcmf_pcie_intr_enable(struct brcmf_pciedev_info *devinfo)
{
- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1)
- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTMASK,
- BRCMF_PCIE_INT_DEF);
- else
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK,
- BRCMF_PCIE_MB_INT_D2H_DB |
- BRCMF_PCIE_MB_INT_FN0_0 |
- BRCMF_PCIE_MB_INT_FN0_1);
+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXMASK,
+ BRCMF_PCIE_MB_INT_D2H_DB |
+ BRCMF_PCIE_MB_INT_FN0_0 |
+ BRCMF_PCIE_MB_INT_FN0_1);
}
-static irqreturn_t brcmf_pcie_quick_check_isr_v1(int irq, void *arg)
-{
- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
- u32 status;
-
- status = 0;
- pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_INTSTATUS, &status);
- if (status) {
- brcmf_pcie_intr_disable(devinfo);
- brcmf_dbg(PCIE, "Enter\n");
- return IRQ_WAKE_THREAD;
- }
- return IRQ_NONE;
-}
-
-
-static irqreturn_t brcmf_pcie_quick_check_isr_v2(int irq, void *arg)
+static irqreturn_t brcmf_pcie_quick_check_isr(int irq, void *arg)
{
struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
@@ -820,29 +769,7 @@ static irqreturn_t brcmf_pcie_quick_chec
}
-static irqreturn_t brcmf_pcie_isr_thread_v1(int irq, void *arg)
-{
- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
- const struct pci_dev *pdev = devinfo->pdev;
- u32 status;
-
- devinfo->in_irq = true;
- status = 0;
- pci_read_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, &status);
- brcmf_dbg(PCIE, "Enter %x\n", status);
- if (status) {
- pci_write_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, status);
- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP)
- brcmf_proto_msgbuf_rx_trigger(&devinfo->pdev->dev);
- }
- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP)
- brcmf_pcie_intr_enable(devinfo);
- devinfo->in_irq = false;
- return IRQ_HANDLED;
-}
-
-
-static irqreturn_t brcmf_pcie_isr_thread_v2(int irq, void *arg)
+static irqreturn_t brcmf_pcie_isr_thread(int irq, void *arg)
{
struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)arg;
u32 status;
@@ -879,28 +806,14 @@ static int brcmf_pcie_request_irq(struct
brcmf_pcie_intr_disable(devinfo);
brcmf_dbg(PCIE, "Enter\n");
- /* is it a v1 or v2 implementation */
+
pci_enable_msi(pdev);
- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) {
- if (request_threaded_irq(pdev->irq,
- brcmf_pcie_quick_check_isr_v1,
- brcmf_pcie_isr_thread_v1,
- IRQF_SHARED, "brcmf_pcie_intr",
- devinfo)) {
- pci_disable_msi(pdev);
- brcmf_err("Failed to request IRQ %d\n", pdev->irq);
- return -EIO;
- }
- } else {
- if (request_threaded_irq(pdev->irq,
- brcmf_pcie_quick_check_isr_v2,
- brcmf_pcie_isr_thread_v2,
- IRQF_SHARED, "brcmf_pcie_intr",
- devinfo)) {
- pci_disable_msi(pdev);
- brcmf_err("Failed to request IRQ %d\n", pdev->irq);
- return -EIO;
- }
+ if (request_threaded_irq(pdev->irq, brcmf_pcie_quick_check_isr,
+ brcmf_pcie_isr_thread, IRQF_SHARED,
+ "brcmf_pcie_intr", devinfo)) {
+ pci_disable_msi(pdev);
+ brcmf_err("Failed to request IRQ %d\n", pdev->irq);
+ return -EIO;
}
devinfo->irq_allocated = true;
return 0;
@@ -931,16 +844,9 @@ static void brcmf_pcie_release_irq(struc
if (devinfo->in_irq)
brcmf_err("Still in IRQ (processing) !!!\n");
- if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) {
- status = 0;
- pci_read_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, &status);
- pci_write_config_dword(pdev, BRCMF_PCIE_REG_INTSTATUS, status);
- } else {
- status = brcmf_pcie_read_reg32(devinfo,
- BRCMF_PCIE_PCIE2REG_MAILBOXINT);
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT,
- status);
- }
+ status = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, status);
+
devinfo->irq_allocated = false;
}
@@ -989,7 +895,9 @@ static int brcmf_pcie_ring_mb_ring_bell(
if (devinfo->state != BRCMFMAC_PCIE_STATE_UP)
return -EIO;
- devinfo->ringbell(devinfo);
+ brcmf_dbg(PCIE, "RING !\n");
+ /* Any arbitrary value will do, lets use 1 */
+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1);
return 0;
}
@@ -1503,9 +1411,6 @@ static int brcmf_pcie_download_fw_nvram(
u32 address;
u32 resetintr;
- devinfo->ringbell = brcmf_pcie_ringbell_v2;
- devinfo->generic_corerev = BRCMF_PCIE_GENREV2;
-
brcmf_dbg(PCIE, "Halt ARM.\n");
err = brcmf_pcie_enter_download_state(devinfo);
if (err)

View File

@ -1,30 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:01 +0100
Subject: [PATCH] brcmfmac: increase timeout for tx eapol
When keys get set and updated this has to happen after eapol got
transmitted (without key or old key) before the key can be updated.
To make sure the order of sending eapol and configuring key is done
correctly a timeout for tx of eapol is applied. This timeout is set
to 50 msec, which is not always enough. Especially in AP mode and
key updates the timeout may need to be much longer because client(s)
can be in powersave. Increase the timeout from 50 to 950 msec.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -42,7 +42,7 @@ MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
MODULE_LICENSE("Dual BSD/GPL");
-#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(50)
+#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950)
/* AMPDU rx reordering definitions */
#define BRCMF_RXREORDER_FLOWID_OFFSET 0

View File

@ -1,135 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:02 +0100
Subject: [PATCH] brcmfmac: move module init and exit to common
In preparation of module parameters for all devices the module init
and exit routines are moved to the common file.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -28,6 +28,10 @@
#include "tracepoint.h"
#include "common.h"
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
+MODULE_LICENSE("Dual BSD/GPL");
+
const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
#define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40
@@ -221,7 +225,7 @@ void __brcmf_dbg(u32 level, const char *
}
#endif
-void brcmf_mp_attach(void)
+static void brcmf_mp_attach(void)
{
strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path,
BRCMF_FW_ALTPATH_LEN);
@@ -249,3 +253,33 @@ void brcmf_mp_device_detach(struct brcmf
kfree(drvr->settings);
}
+static int __init brcmfmac_module_init(void)
+{
+ int err;
+
+ /* Initialize debug system first */
+ brcmf_debugfs_init();
+
+#ifdef CPTCFG_BRCMFMAC_SDIO
+ brcmf_sdio_init();
+#endif
+ /* Initialize global module paramaters */
+ brcmf_mp_attach();
+
+ /* Continue the initialization by registering the different busses */
+ err = brcmf_core_init();
+ if (err)
+ brcmf_debugfs_exit();
+
+ return err;
+}
+
+static void __exit brcmfmac_module_exit(void)
+{
+ brcmf_core_exit();
+ brcmf_debugfs_exit();
+}
+
+module_init(brcmfmac_module_init);
+module_exit(brcmfmac_module_exit);
+
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -89,7 +89,6 @@ struct brcmf_mp_device {
struct cc_translate *country_codes;
};
-void brcmf_mp_attach(void);
int brcmf_mp_device_attach(struct brcmf_pub *drvr);
void brcmf_mp_device_detach(struct brcmf_pub *drvr);
#ifdef DEBUG
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -38,10 +38,6 @@
#include "pcie.h"
#include "common.h"
-MODULE_AUTHOR("Broadcom Corporation");
-MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
-MODULE_LICENSE("Dual BSD/GPL");
-
#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950)
/* AMPDU rx reordering definitions */
@@ -1422,19 +1418,15 @@ static void brcmf_driver_register(struct
}
static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
-static int __init brcmfmac_module_init(void)
+int __init brcmf_core_init(void)
{
- brcmf_debugfs_init();
-#ifdef CPTCFG_BRCMFMAC_SDIO
- brcmf_sdio_init();
-#endif
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
return 0;
}
-static void __exit brcmfmac_module_exit(void)
+void __exit brcmf_core_exit(void)
{
cancel_work_sync(&brcmf_driver_work);
@@ -1447,8 +1439,5 @@ static void __exit brcmfmac_module_exit(
#ifdef CPTCFG_BRCMFMAC_PCIE
brcmf_pcie_exit();
#endif
- brcmf_debugfs_exit();
}
-module_init(brcmfmac_module_init);
-module_exit(brcmfmac_module_exit);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -227,5 +227,7 @@ void brcmf_txflowblock_if(struct brcmf_i
void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
+int __init brcmf_core_init(void);
+void __exit brcmf_core_exit(void);
#endif /* BRCMFMAC_CORE_H */

View File

@ -1,260 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:03 +0100
Subject: [PATCH] brcmfmac: add wowl gtk rekeying offload support
This patch adds support for gtk rekeying offload and for gtk
rekeying failure during wowl mode.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3526,6 +3526,10 @@ static void brcmf_report_wowl_wakeind(st
else
wakeup_data.net_detect = cfg->wowl.nd_info;
}
+ if (wakeind & BRCMF_WOWL_GTK_FAILURE) {
+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_GTK_FAILURE\n");
+ wakeup_data.gtk_rekey_failure = true;
+ }
} else {
wakeup = NULL;
}
@@ -3607,6 +3611,8 @@ static void brcmf_configure_wowl(struct
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND,
brcmf_wowl_nd_results);
}
+ if (wowl->gtk_rekey_failure)
+ wowl_config |= BRCMF_WOWL_GTK_FAILURE;
if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state))
wowl_config |= BRCMF_WOWL_UNASSOC;
@@ -4874,7 +4880,32 @@ static int brcmf_cfg80211_tdls_oper(stru
return ret;
}
-static struct cfg80211_ops wl_cfg80211_ops = {
+#ifdef CONFIG_PM
+static int
+brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev,
+ struct cfg80211_gtk_rekey_data *gtk)
+{
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_gtk_keyinfo_le gtk_le;
+ int ret;
+
+ brcmf_dbg(TRACE, "Enter, bssidx=%d\n", ifp->bsscfgidx);
+
+ memcpy(gtk_le.kck, gtk->kck, sizeof(gtk_le.kck));
+ memcpy(gtk_le.kek, gtk->kek, sizeof(gtk_le.kek));
+ memcpy(gtk_le.replay_counter, gtk->replay_ctr,
+ sizeof(gtk_le.replay_counter));
+
+ ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", &gtk_le,
+ sizeof(gtk_le));
+ if (ret < 0)
+ brcmf_err("gtk_key_info iovar failed: ret=%d\n", ret);
+
+ return ret;
+}
+#endif
+
+static struct cfg80211_ops brcmf_cfg80211_ops = {
.add_virtual_intf = brcmf_cfg80211_add_iface,
.del_virtual_intf = brcmf_cfg80211_del_iface,
.change_virtual_intf = brcmf_cfg80211_change_iface,
@@ -6139,19 +6170,18 @@ static void brcmf_wiphy_wowl_params(stru
{
#ifdef CONFIG_PM
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- s32 err;
- u32 wowl_cap;
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) {
- err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap);
- if (!err) {
- if (wowl_cap & BRCMF_WOWL_PFN_FOUND) {
- brcmf_wowlan_support.flags |=
- WIPHY_WOWLAN_NET_DETECT;
- init_waitqueue_head(&cfg->wowl.nd_data_wait);
- }
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ND)) {
+ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_NET_DETECT;
+ init_waitqueue_head(&cfg->wowl.nd_data_wait);
}
}
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) {
+ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY;
+ brcmf_wowlan_support.flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE;
+ }
+
wiphy->wowlan = &brcmf_wowlan_support;
#endif
}
@@ -6538,6 +6568,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
struct brcmf_cfg80211_info *cfg;
struct wiphy *wiphy;
+ struct cfg80211_ops *ops;
struct brcmf_cfg80211_vif *vif;
struct brcmf_if *ifp;
s32 err = 0;
@@ -6549,8 +6580,17 @@ struct brcmf_cfg80211_info *brcmf_cfg802
return NULL;
}
+ ops = kzalloc(sizeof(*ops), GFP_KERNEL);
+ if (!ops)
+ return NULL;
+
+ memcpy(ops, &brcmf_cfg80211_ops, sizeof(*ops));
ifp = netdev_priv(ndev);
- wiphy = wiphy_new(&wl_cfg80211_ops, sizeof(struct brcmf_cfg80211_info));
+#ifdef CONFIG_PM
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK))
+ ops->set_rekey_data = brcmf_cfg80211_set_rekey_data;
+#endif
+ wiphy = wiphy_new(ops, sizeof(struct brcmf_cfg80211_info));
if (!wiphy) {
brcmf_err("Could not allocate wiphy device\n");
return NULL;
@@ -6560,6 +6600,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
cfg = wiphy_priv(wiphy);
cfg->wiphy = wiphy;
+ cfg->ops = ops;
cfg->pub = drvr;
init_vif_event(&cfg->vif_event);
INIT_LIST_HEAD(&cfg->vif_list);
@@ -6686,6 +6727,7 @@ priv_out:
ifp->vif = NULL;
wiphy_out:
brcmf_free_wiphy(wiphy);
+ kfree(ops);
return NULL;
}
@@ -6696,6 +6738,7 @@ void brcmf_cfg80211_detach(struct brcmf_
brcmf_btcoex_detach(cfg);
wiphy_unregister(cfg->wiphy);
+ kfree(cfg->ops);
wl_deinit_priv(cfg);
brcmf_free_wiphy(cfg->wiphy);
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -256,6 +256,7 @@ struct brcmf_cfg80211_wowl {
* struct brcmf_cfg80211_info - dongle private data of cfg80211 interface
*
* @wiphy: wiphy object for cfg80211 interface.
+ * @ops: pointer to copy of ops as registered with wiphy object.
* @conf: dongle configuration.
* @p2p: peer-to-peer specific information.
* @btcoex: Bluetooth coexistence information.
@@ -288,6 +289,7 @@ struct brcmf_cfg80211_wowl {
*/
struct brcmf_cfg80211_info {
struct wiphy *wiphy;
+ struct cfg80211_ops *ops;
struct brcmf_cfg80211_conf *conf;
struct brcmf_p2p_info p2p;
struct brcmf_btcoex_info *btcoex;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -136,6 +136,7 @@ void brcmf_feat_attach(struct brcmf_pub
{
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
struct brcmf_pno_macaddr_le pfn_mac;
+ u32 wowl_cap;
s32 err;
brcmf_feat_firmware_capabilities(ifp);
@@ -143,6 +144,17 @@ void brcmf_feat_attach(struct brcmf_pub
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
if (drvr->bus_if->wowl_supported)
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) {
+ err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap);
+ if (!err) {
+ if (wowl_cap & BRCMF_WOWL_PFN_FOUND)
+ ifp->drvr->feat_flags |=
+ BIT(BRCMF_FEAT_WOWL_ND);
+ if (wowl_cap & BRCMF_WOWL_GTK_FAILURE)
+ ifp->drvr->feat_flags |=
+ BIT(BRCMF_FEAT_WOWL_GTK);
+ }
+ }
/* MBSS does not work for 43362 */
if (drvr->bus_if->chip == BRCM_CC_43362_CHIP_ID)
ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
@@ -27,6 +27,8 @@
* RSDB: Real Simultaneous Dual Band
* TDLS: Tunneled Direct Link Setup
* SCAN_RANDOM_MAC: Random MAC during (net detect) scheduled scan.
+ * WOWL_ND: WOWL net detect (PNO)
+ * WOWL_GTK: (WOWL) GTK rekeying offload
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -36,7 +38,9 @@
BRCMF_FEAT_DEF(P2P) \
BRCMF_FEAT_DEF(RSDB) \
BRCMF_FEAT_DEF(TDLS) \
- BRCMF_FEAT_DEF(SCAN_RANDOM_MAC)
+ BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \
+ BRCMF_FEAT_DEF(WOWL_ND) \
+ BRCMF_FEAT_DEF(WOWL_GTK)
/*
* Quirks:
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -111,7 +111,9 @@
/* Wakeup if received matched secured pattern: */
#define BRCMF_WOWL_SECURE (1 << 25)
/* Wakeup on finding preferred network */
-#define BRCMF_WOWL_PFN_FOUND (1 << 26)
+#define BRCMF_WOWL_PFN_FOUND (1 << 27)
+/* Wakeup on receiving pairwise key EAP packets: */
+#define WIPHY_WOWL_EAP_PK (1 << 28)
/* Link Down indication in WoWL mode: */
#define BRCMF_WOWL_LINKDOWN (1 << 31)
@@ -136,6 +138,10 @@
#define BRCMF_MCSSET_LEN 16
+#define BRCMF_RSN_KCK_LENGTH 16
+#define BRCMF_RSN_KEK_LENGTH 16
+#define BRCMF_RSN_REPLAY_LEN 8
+
/* join preference types for join_pref iovar */
enum brcmf_join_pref_types {
BRCMF_JOIN_PREF_RSSI = 1,
@@ -789,4 +795,17 @@ struct brcmf_pktcnt_le {
__le32 rx_ocast_good_pkt;
};
+/**
+ * struct brcmf_gtk_keyinfo_le - GTP rekey data
+ *
+ * @kck: key confirmation key.
+ * @kek: key encryption key.
+ * @replay_counter: replay counter.
+ */
+struct brcmf_gtk_keyinfo_le {
+ u8 kck[BRCMF_RSN_KCK_LENGTH];
+ u8 kek[BRCMF_RSN_KEK_LENGTH];
+ u8 replay_counter[BRCMF_RSN_REPLAY_LEN];
+};
+
#endif /* FWIL_TYPES_H_ */

View File

@ -1,385 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:04 +0100
Subject: [PATCH] brcmfmac: move platform data retrieval code to common
In preparation of module parameters for all devices the module
platform data retrieval is moved from sdio to common. It is still
only used for sdio devices.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -27,8 +27,6 @@
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/brcmfmac-sdio.h>
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
#include <linux/errno.h>
@@ -46,7 +44,6 @@
#include "bus.h"
#include "debug.h"
#include "sdio.h"
-#include "of.h"
#include "core.h"
#include "common.h"
@@ -106,18 +103,18 @@ static void brcmf_sdiod_dummy_irqhandler
int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
{
+ struct brcmfmac_sdio_platform_data *pdata;
int ret = 0;
u8 data;
u32 addr, gpiocontrol;
unsigned long flags;
- if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
+ pdata = sdiodev->pdata;
+ if ((pdata) && (pdata->oob_irq_supported)) {
brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
- sdiodev->pdata->oob_irq_nr);
- ret = request_irq(sdiodev->pdata->oob_irq_nr,
- brcmf_sdiod_oob_irqhandler,
- sdiodev->pdata->oob_irq_flags,
- "brcmf_oob_intr",
+ pdata->oob_irq_nr);
+ ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
+ pdata->oob_irq_flags, "brcmf_oob_intr",
&sdiodev->func[1]->dev);
if (ret != 0) {
brcmf_err("request_irq failed %d\n", ret);
@@ -129,7 +126,7 @@ int brcmf_sdiod_intr_register(struct brc
sdiodev->irq_en = true;
spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
- ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr);
+ ret = enable_irq_wake(pdata->oob_irq_nr);
if (ret != 0) {
brcmf_err("enable_irq_wake failed %d\n", ret);
return ret;
@@ -158,7 +155,7 @@ int brcmf_sdiod_intr_register(struct brc
/* redirect, configure and enable io for interrupt signal */
data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
- if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
+ if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
data |= SDIO_SEPINT_ACT_HI;
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
@@ -176,9 +173,12 @@ int brcmf_sdiod_intr_register(struct brc
int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
+ struct brcmfmac_sdio_platform_data *pdata;
+
brcmf_dbg(SDIO, "Entering\n");
- if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
+ pdata = sdiodev->pdata;
+ if ((pdata) && (pdata->oob_irq_supported)) {
sdio_claim_host(sdiodev->func[1]);
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
@@ -187,11 +187,10 @@ int brcmf_sdiod_intr_unregister(struct b
if (sdiodev->oob_irq_requested) {
sdiodev->oob_irq_requested = false;
if (sdiodev->irq_wake) {
- disable_irq_wake(sdiodev->pdata->oob_irq_nr);
+ disable_irq_wake(pdata->oob_irq_nr);
sdiodev->irq_wake = false;
}
- free_irq(sdiodev->pdata->oob_irq_nr,
- &sdiodev->func[1]->dev);
+ free_irq(pdata->oob_irq_nr, &sdiodev->func[1]->dev);
sdiodev->irq_en = false;
}
} else {
@@ -1103,8 +1102,6 @@ static const struct sdio_device_id brcmf
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
-static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;
-
static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev,
int val)
@@ -1167,10 +1164,7 @@ static int brcmf_ops_sdio_probe(struct s
dev_set_drvdata(&func->dev, bus_if);
dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
sdiodev->dev = &sdiodev->func[1]->dev;
- sdiodev->pdata = brcmfmac_sdio_pdata;
-
- if (!sdiodev->pdata)
- brcmf_of_probe(sdiodev);
+ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev);
#ifdef CONFIG_PM_SLEEP
/* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
@@ -1296,7 +1290,7 @@ static const struct dev_pm_ops brcmf_sdi
static struct sdio_driver brcmf_sdmmc_driver = {
.probe = brcmf_ops_sdio_probe,
.remove = brcmf_ops_sdio_remove,
- .name = BRCMFMAC_SDIO_PDATA_NAME,
+ .name = KBUILD_MODNAME,
.id_table = brcmf_sdmmc_ids,
.drv = {
.owner = THIS_MODULE,
@@ -1306,37 +1300,6 @@ static struct sdio_driver brcmf_sdmmc_dr
},
};
-static int __init brcmf_sdio_pd_probe(struct platform_device *pdev)
-{
- brcmf_dbg(SDIO, "Enter\n");
-
- brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev);
-
- if (brcmfmac_sdio_pdata->power_on)
- brcmfmac_sdio_pdata->power_on();
-
- return 0;
-}
-
-static int brcmf_sdio_pd_remove(struct platform_device *pdev)
-{
- brcmf_dbg(SDIO, "Enter\n");
-
- if (brcmfmac_sdio_pdata->power_off)
- brcmfmac_sdio_pdata->power_off();
-
- sdio_unregister_driver(&brcmf_sdmmc_driver);
-
- return 0;
-}
-
-static struct platform_driver brcmf_sdio_pd = {
- .remove = brcmf_sdio_pd_remove,
- .driver = {
- .name = BRCMFMAC_SDIO_PDATA_NAME,
- }
-};
-
void brcmf_sdio_register(void)
{
int ret;
@@ -1350,19 +1313,6 @@ void brcmf_sdio_exit(void)
{
brcmf_dbg(SDIO, "Enter\n");
- if (brcmfmac_sdio_pdata)
- platform_driver_unregister(&brcmf_sdio_pd);
- else
- sdio_unregister_driver(&brcmf_sdmmc_driver);
+ sdio_unregister_driver(&brcmf_sdmmc_driver);
}
-void __init brcmf_sdio_init(void)
-{
- int ret;
-
- brcmf_dbg(SDIO, "Enter\n");
-
- ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
- if (ret == -ENODEV)
- brcmf_dbg(SDIO, "No platform data available.\n");
-}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -27,6 +27,7 @@
#include "fwil_types.h"
#include "tracepoint.h"
#include "common.h"
+#include "of.h"
MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
@@ -79,6 +80,7 @@ module_param_named(ignore_probe_fail, br
MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
#endif
+static struct brcmfmac_sdio_platform_data *brcmfmac_pdata;
struct brcmf_mp_global_t brcmf_mp_global;
int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
@@ -231,6 +233,13 @@ static void brcmf_mp_attach(void)
BRCMF_FW_ALTPATH_LEN);
}
+struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev)
+{
+ if (!brcmfmac_pdata)
+ brcmf_of_probe(dev, &brcmfmac_pdata);
+ return brcmfmac_pdata;
+}
+
int brcmf_mp_device_attach(struct brcmf_pub *drvr)
{
drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
@@ -253,6 +262,35 @@ void brcmf_mp_device_detach(struct brcmf
kfree(drvr->settings);
}
+static int __init brcmf_common_pd_probe(struct platform_device *pdev)
+{
+ brcmf_dbg(INFO, "Enter\n");
+
+ brcmfmac_pdata = dev_get_platdata(&pdev->dev);
+
+ if (brcmfmac_pdata->power_on)
+ brcmfmac_pdata->power_on();
+
+ return 0;
+}
+
+static int brcmf_common_pd_remove(struct platform_device *pdev)
+{
+ brcmf_dbg(INFO, "Enter\n");
+
+ if (brcmfmac_pdata->power_off)
+ brcmfmac_pdata->power_off();
+
+ return 0;
+}
+
+static struct platform_driver brcmf_pd = {
+ .remove = brcmf_common_pd_remove,
+ .driver = {
+ .name = BRCMFMAC_SDIO_PDATA_NAME,
+ }
+};
+
static int __init brcmfmac_module_init(void)
{
int err;
@@ -260,16 +298,21 @@ static int __init brcmfmac_module_init(v
/* Initialize debug system first */
brcmf_debugfs_init();
-#ifdef CPTCFG_BRCMFMAC_SDIO
- brcmf_sdio_init();
-#endif
+ /* Get the platform data (if available) for our devices */
+ err = platform_driver_probe(&brcmf_pd, brcmf_common_pd_probe);
+ if (err == -ENODEV)
+ brcmf_dbg(INFO, "No platform data available.\n");
+
/* Initialize global module paramaters */
brcmf_mp_attach();
/* Continue the initialization by registering the different busses */
err = brcmf_core_init();
- if (err)
+ if (err) {
brcmf_debugfs_exit();
+ if (brcmfmac_pdata)
+ platform_driver_unregister(&brcmf_pd);
+ }
return err;
}
@@ -277,6 +320,8 @@ static int __init brcmfmac_module_init(v
static void __exit brcmfmac_module_exit(void)
{
brcmf_core_exit();
+ if (brcmfmac_pdata)
+ platform_driver_unregister(&brcmf_pd);
brcmf_debugfs_exit();
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -15,6 +15,8 @@
#ifndef BRCMFMAC_COMMON_H
#define BRCMFMAC_COMMON_H
+#include <linux/platform_device.h>
+#include <linux/platform_data/brcmfmac-sdio.h>
#include "fwil_types.h"
extern const u8 ALLFFMAC[ETH_ALEN];
@@ -89,6 +91,7 @@ struct brcmf_mp_device {
struct cc_translate *country_codes;
};
+struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev);
int brcmf_mp_device_attach(struct brcmf_pub *drvr);
void brcmf_mp_device_detach(struct brcmf_pub *drvr);
#ifdef DEBUG
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -16,17 +16,16 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/mmc/card.h>
-#include <linux/platform_data/brcmfmac-sdio.h>
-#include <linux/mmc/sdio_func.h>
#include <defs.h>
#include "debug.h"
-#include "sdio.h"
+#include "core.h"
+#include "common.h"
+#include "of.h"
-void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev)
+void
+brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio)
{
- struct device *dev = sdiodev->dev;
struct device_node *np = dev->of_node;
int irq;
u32 irqf;
@@ -35,12 +34,12 @@ void brcmf_of_probe(struct brcmf_sdio_de
if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
return;
- sdiodev->pdata = devm_kzalloc(dev, sizeof(*sdiodev->pdata), GFP_KERNEL);
- if (!sdiodev->pdata)
+ *sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL);
+ if (!(*sdio))
return;
if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
- sdiodev->pdata->drive_strength = val;
+ (*sdio)->drive_strength = val;
/* make sure there are interrupts defined in the node */
if (!of_find_property(np, "interrupts", NULL))
@@ -53,7 +52,7 @@ void brcmf_of_probe(struct brcmf_sdio_de
}
irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
- sdiodev->pdata->oob_irq_supported = true;
- sdiodev->pdata->oob_irq_nr = irq;
- sdiodev->pdata->oob_irq_flags = irqf;
+ (*sdio)->oob_irq_supported = true;
+ (*sdio)->oob_irq_nr = irq;
+ (*sdio)->oob_irq_flags = irqf;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
@@ -14,9 +14,11 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifdef CONFIG_OF
-void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev);
+void
+brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio);
#else
-static void brcmf_of_probe(struct brcmf_sdio_dev *sdiodev)
+static void brcmf_of_probe(struct device *dev,
+ struct brcmfmac_sdio_platform_data **sdio)
{
}
#endif /* CONFIG_OF */

View File

@ -1,69 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:05 +0100
Subject: [PATCH] brcmfmac: keep ARP and ND offload enabled during WOWL
Currently ARP and ND (IPv6 Neigbor Discovery) offload get disabled
on entering suspend. However when firmwares support the wowl_cap
iovar then these offload routines can be kept enabled as they
will work during WOWL as well.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3556,7 +3556,8 @@ static s32 brcmf_cfg80211_resume(struct
brcmf_report_wowl_wakeind(wiphy, ifp);
brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0);
- brcmf_configure_arp_nd_offload(ifp, true);
+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND))
+ brcmf_configure_arp_nd_offload(ifp, true);
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
cfg->wowl.pre_pmmode);
cfg->wowl.active = false;
@@ -3580,7 +3581,8 @@ static void brcmf_configure_wowl(struct
brcmf_dbg(TRACE, "Suspend, wowl config.\n");
- brcmf_configure_arp_nd_offload(ifp, false);
+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND))
+ brcmf_configure_arp_nd_offload(ifp, false);
brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode);
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -147,6 +147,7 @@ void brcmf_feat_attach(struct brcmf_pub
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) {
err = brcmf_fil_iovar_int_get(ifp, "wowl_cap", &wowl_cap);
if (!err) {
+ ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_WOWL_ARP_ND);
if (wowl_cap & BRCMF_WOWL_PFN_FOUND)
ifp->drvr->feat_flags |=
BIT(BRCMF_FEAT_WOWL_ND);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
@@ -29,6 +29,7 @@
* SCAN_RANDOM_MAC: Random MAC during (net detect) scheduled scan.
* WOWL_ND: WOWL net detect (PNO)
* WOWL_GTK: (WOWL) GTK rekeying offload
+ * WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL.
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -40,7 +41,8 @@
BRCMF_FEAT_DEF(TDLS) \
BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \
BRCMF_FEAT_DEF(WOWL_ND) \
- BRCMF_FEAT_DEF(WOWL_GTK)
+ BRCMF_FEAT_DEF(WOWL_GTK) \
+ BRCMF_FEAT_DEF(WOWL_ARP_ND)
/*
* Quirks:

View File

@ -1,734 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:07 +0100
Subject: [PATCH] brcmfmac: switch to new platform data
Platform data is only available for sdio. With this patch a new
platform data structure is being used which allows for platform
data for any device and configurable per device. This patch only
switches to the new structure and adds support for SDIO devices.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -103,7 +103,7 @@ static void brcmf_sdiod_dummy_irqhandler
int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
{
- struct brcmfmac_sdio_platform_data *pdata;
+ struct brcmfmac_sdio_pd *pdata;
int ret = 0;
u8 data;
u32 addr, gpiocontrol;
@@ -173,7 +173,7 @@ int brcmf_sdiod_intr_register(struct brc
int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
- struct brcmfmac_sdio_platform_data *pdata;
+ struct brcmfmac_sdio_pd *pdata;
brcmf_dbg(SDIO, "Entering\n");
@@ -1164,17 +1164,6 @@ static int brcmf_ops_sdio_probe(struct s
dev_set_drvdata(&func->dev, bus_if);
dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
sdiodev->dev = &sdiodev->func[1]->dev;
- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev);
-
-#ifdef CONFIG_PM_SLEEP
- /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
- * is true or when platform data OOB irq is true).
- */
- if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
- ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
- bus_if->wowl_supported = true;
-#endif
brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6459,8 +6459,8 @@ int brcmf_cfg80211_wait_vif_event(struct
static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
struct brcmf_fil_country_le *ccreq)
{
- struct cc_translate *country_codes;
- struct cc_entry *cc;
+ struct brcmfmac_pd_cc *country_codes;
+ struct brcmfmac_pd_cc_entry *cc;
s32 found_index;
int i;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -80,7 +80,7 @@ module_param_named(ignore_probe_fail, br
MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
#endif
-static struct brcmfmac_sdio_platform_data *brcmfmac_pdata;
+static struct brcmfmac_platform_data *brcmfmac_pdata;
struct brcmf_mp_global_t brcmf_mp_global;
int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
@@ -229,15 +229,46 @@ void __brcmf_dbg(u32 level, const char *
static void brcmf_mp_attach(void)
{
+ /* If module param firmware path is set then this will always be used,
+ * if not set then if available use the platform data version. To make
+ * sure it gets initialized at all, always copy the module param version
+ */
strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path,
BRCMF_FW_ALTPATH_LEN);
+ if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) &&
+ (brcmf_mp_global.firmware_path[0] == '\0')) {
+ strlcpy(brcmf_mp_global.firmware_path,
+ brcmfmac_pdata->fw_alternative_path,
+ BRCMF_FW_ALTPATH_LEN);
+ }
}
-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev)
-{
- if (!brcmfmac_pdata)
- brcmf_of_probe(dev, &brcmfmac_pdata);
- return brcmfmac_pdata;
+struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
+ enum brcmf_bus_type bus_type,
+ u32 chip, u32 chiprev)
+{
+ struct brcmfmac_sdio_pd *pdata;
+ struct brcmfmac_pd_device *device_pd;
+ int i;
+
+ if (brcmfmac_pdata) {
+ for (i = 0; i < brcmfmac_pdata->device_count; i++) {
+ device_pd = &brcmfmac_pdata->devices[i];
+ if ((device_pd->bus_type == bus_type) &&
+ (device_pd->id == chip) &&
+ ((device_pd->rev == chiprev) ||
+ (device_pd->rev == -1))) {
+ brcmf_dbg(INFO, "Platform data for device found\n");
+ if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
+ return &device_pd->bus.sdio;
+ break;
+ }
+ }
+ }
+ pdata = NULL;
+ brcmf_of_probe(dev, &pdata);
+
+ return pdata;
}
int brcmf_mp_device_attach(struct brcmf_pub *drvr)
@@ -287,7 +318,7 @@ static int brcmf_common_pd_remove(struct
static struct platform_driver brcmf_pd = {
.remove = brcmf_common_pd_remove,
.driver = {
- .name = BRCMFMAC_SDIO_PDATA_NAME,
+ .name = BRCMFMAC_PDATA_NAME,
}
};
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -16,7 +16,7 @@
#define BRCMFMAC_COMMON_H
#include <linux/platform_device.h>
-#include <linux/platform_data/brcmfmac-sdio.h>
+#include <linux/platform_data/brcmfmac.h>
#include "fwil_types.h"
extern const u8 ALLFFMAC[ETH_ALEN];
@@ -43,33 +43,6 @@ struct brcmf_mp_global_t {
extern struct brcmf_mp_global_t brcmf_mp_global;
/**
- * struct cc_entry - Struct for translating user space country code (iso3166) to
- * firmware country code and revision.
- *
- * @iso3166: iso3166 alpha 2 country code string.
- * @cc: firmware country code string.
- * @rev: firmware country code revision.
- */
-struct cc_entry {
- char iso3166[BRCMF_COUNTRY_BUF_SZ];
- char cc[BRCMF_COUNTRY_BUF_SZ];
- s32 rev;
-};
-
-/**
- * struct cc_translate - Struct for translating country codes as set by user
- * space to a country code and rev which can be used by
- * firmware.
- *
- * @table_size: number of entries in table (> 0)
- * @table: dynamic array of 1 or more elements with translation information.
- */
-struct cc_translate {
- int table_size;
- struct cc_entry table[0];
-};
-
-/**
* struct brcmf_mp_device - Device module paramaters.
*
* @sdiod_txglomsz: SDIO txglom size.
@@ -88,10 +61,12 @@ struct brcmf_mp_device {
int fcmode;
bool roamoff;
bool ignore_probe_fail;
- struct cc_translate *country_codes;
+ struct brcmfmac_pd_cc *country_codes;
};
-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev);
+struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
+ enum brcmf_bus_type bus_type,
+ u32 chip, u32 chiprev);
int brcmf_mp_device_attach(struct brcmf_pub *drvr);
void brcmf_mp_device_detach(struct brcmf_pub *drvr);
#ifdef DEBUG
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -23,8 +23,7 @@
#include "common.h"
#include "of.h"
-void
-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio)
+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
{
struct device_node *np = dev->of_node;
int irq;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
@@ -15,10 +15,9 @@
*/
#ifdef CONFIG_OF
void
-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio);
+brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio);
#else
-static void brcmf_of_probe(struct device *dev,
- struct brcmfmac_sdio_platform_data **sdio)
+static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
{
}
#endif /* CONFIG_OF */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -33,8 +33,6 @@
#include <linux/bcma/bcma.h>
#include <linux/debugfs.h>
#include <linux/vmalloc.h>
-#include <linux/platform_data/brcmfmac-sdio.h>
-#include <linux/moduleparam.h>
#include <asm/unaligned.h>
#include <defs.h>
#include <brcmu_wifi.h>
@@ -44,6 +42,8 @@
#include "sdio.h"
#include "chip.h"
#include "firmware.h"
+#include "core.h"
+#include "common.h"
#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
@@ -3775,26 +3775,28 @@ static const struct brcmf_buscore_ops br
static bool
brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
{
+ struct brcmf_sdio_dev *sdiodev;
u8 clkctl = 0;
int err = 0;
int reg_addr;
u32 reg_val;
u32 drivestrength;
- sdio_claim_host(bus->sdiodev->func[1]);
+ sdiodev = bus->sdiodev;
+ sdio_claim_host(sdiodev->func[1]);
pr_debug("F1 signature read @0x18000000=0x%4x\n",
- brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
+ brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
/*
* Force PLL off until brcmf_chip_attach()
* programs PLL control regs
*/
- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
BRCMF_INIT_CLKCTL1, &err);
if (!err)
- clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+ clkctl = brcmf_sdiod_regrb(sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
@@ -3803,50 +3805,77 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
goto fail;
}
- bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
+ bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops);
if (IS_ERR(bus->ci)) {
brcmf_err("brcmf_chip_attach failed!\n");
bus->ci = NULL;
goto fail;
}
+ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
+ BRCMF_BUSTYPE_SDIO,
+ bus->ci->chip,
+ bus->ci->chiprev);
+ /* platform specific configuration:
+ * alignments must be at least 4 bytes for ADMA
+ */
+ bus->head_align = ALIGNMENT;
+ bus->sgentry_align = ALIGNMENT;
+ if (sdiodev->pdata) {
+ if (sdiodev->pdata->sd_head_align > ALIGNMENT)
+ bus->head_align = sdiodev->pdata->sd_head_align;
+ if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
+ bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
+ }
+ /* allocate scatter-gather table. sg support
+ * will be disabled upon allocation failure.
+ */
+ brcmf_sdiod_sgtable_alloc(sdiodev);
+
+#ifdef CONFIG_PM_SLEEP
+ /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
+ * is true or when platform data OOB irq is true).
+ */
+ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
+ ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
+ (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
+ sdiodev->bus_if->wowl_supported = true;
+#endif
if (brcmf_sdio_kso_init(bus)) {
brcmf_err("error enabling KSO\n");
goto fail;
}
- if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
- drivestrength = bus->sdiodev->pdata->drive_strength;
+ if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
+ drivestrength = sdiodev->pdata->drive_strength;
else
drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
- brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
+ brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
/* Set card control so an SDIO card reset does a WLAN backplane reset */
- reg_val = brcmf_sdiod_regrb(bus->sdiodev,
- SDIO_CCCR_BRCM_CARDCTRL, &err);
+ reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
if (err)
goto fail;
reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
- brcmf_sdiod_regwb(bus->sdiodev,
- SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
if (err)
goto fail;
/* set PMUControl so a backplane reset does PMU state reload */
reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
- reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
+ reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
if (err)
goto fail;
reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
- brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
+ brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
if (err)
goto fail;
- sdio_release_host(bus->sdiodev->func[1]);
+ sdio_release_host(sdiodev->func[1]);
brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
@@ -3867,7 +3896,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
return true;
fail:
- sdio_release_host(bus->sdiodev->func[1]);
+ sdio_release_host(sdiodev->func[1]);
return false;
}
@@ -4045,18 +4074,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
bus->txminmax = BRCMF_TXMINMAX;
bus->tx_seq = SDPCM_SEQ_WRAP - 1;
- /* platform specific configuration:
- * alignments must be at least 4 bytes for ADMA
- */
- bus->head_align = ALIGNMENT;
- bus->sgentry_align = ALIGNMENT;
- if (sdiodev->pdata) {
- if (sdiodev->pdata->sd_head_align > ALIGNMENT)
- bus->head_align = sdiodev->pdata->sd_head_align;
- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
- }
-
/* single-threaded workqueue */
wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM,
dev_name(&sdiodev->func[1]->dev));
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -184,7 +184,7 @@ struct brcmf_sdio_dev {
struct brcmf_sdio *bus;
struct device *dev;
struct brcmf_bus *bus_if;
- struct brcmfmac_sdio_platform_data *pdata;
+ struct brcmfmac_sdio_pd *pdata;
bool oob_irq_requested;
bool irq_en; /* irq enable flags */
spinlock_t irq_en_lock;
--- a/include/linux/platform_data/brcmfmac-sdio.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (c) 2013 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _LINUX_BRCMFMAC_PLATFORM_H
-#define _LINUX_BRCMFMAC_PLATFORM_H
-
-/*
- * Platform specific driver functions and data. Through the platform specific
- * device data functions can be provided to help the brcmfmac driver to
- * operate with the device in combination with the used platform.
- *
- * Use the platform data in the following (similar) way:
- *
- *
-#include <brcmfmac_platform.h>
-
-
-static void brcmfmac_power_on(void)
-{
-}
-
-static void brcmfmac_power_off(void)
-{
-}
-
-static void brcmfmac_reset(void)
-{
-}
-
-static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
- .power_on = brcmfmac_power_on,
- .power_off = brcmfmac_power_off,
- .reset = brcmfmac_reset
-};
-
-static struct platform_device brcmfmac_device = {
- .name = BRCMFMAC_SDIO_PDATA_NAME,
- .id = PLATFORM_DEVID_NONE,
- .dev.platform_data = &brcmfmac_sdio_pdata
-};
-
-void __init brcmfmac_init_pdata(void)
-{
- brcmfmac_sdio_pdata.oob_irq_supported = true;
- brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
- brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
- IORESOURCE_IRQ_HIGHLEVEL;
- platform_device_register(&brcmfmac_device);
-}
- *
- *
- * Note: the brcmfmac can be loaded as module or be statically built-in into
- * the kernel. If built-in then do note that it uses module_init (and
- * module_exit) routines which equal device_initcall. So if you intend to
- * create a module with the platform specific data for the brcmfmac and have
- * it built-in to the kernel then use a higher initcall then device_initcall
- * (see init.h). If this is not done then brcmfmac will load without problems
- * but will not pickup the platform data.
- *
- * When the driver does not "detect" platform driver data then it will continue
- * without reporting anything and just assume there is no data needed. Which is
- * probably true for most platforms.
- *
- * Explanation of the platform_data fields:
- *
- * drive_strength: is the preferred drive_strength to be used for the SDIO
- * pins. If 0 then a default value will be used. This is the target drive
- * strength, the exact drive strength which will be used depends on the
- * capabilities of the device.
- *
- * oob_irq_supported: does the board have support for OOB interrupts. SDIO
- * in-band interrupts are relatively slow and for having less overhead on
- * interrupt processing an out of band interrupt can be used. If the HW
- * supports this then enable this by setting this field to true and configure
- * the oob related fields.
- *
- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
- * used for registering the irq using request_irq function.
- *
- * broken_sg_support: flag for broken sg list support of SDIO host controller.
- * Set this to true if the SDIO host controller has higher align requirement
- * than 32 bytes for each scatterlist item.
- *
- * sd_head_align: alignment requirement for start of data buffer
- *
- * sd_sgentry_align: length alignment requirement for each sg entry
- *
- * power_on: This function is called by the brcmfmac when the module gets
- * loaded. This can be particularly useful for low power devices. The platform
- * spcific routine may for example decide to power up the complete device.
- * If there is no use-case for this function then provide NULL.
- *
- * power_off: This function is called by the brcmfmac when the module gets
- * unloaded. At this point the device can be powered down or otherwise be reset.
- * So if an actual power_off is not supported but reset is then reset the device
- * when this function gets called. This can be particularly useful for low power
- * devices. If there is no use-case for this function (either power-down or
- * reset) then provide NULL.
- *
- * reset: This function can get called if the device communication broke down.
- * This functionality is particularly useful in case of SDIO type devices. It is
- * possible to reset a dongle via sdio data interface, but it requires that
- * this is fully functional. This function is chip/module specific and this
- * function should return only after the complete reset has completed.
- */
-
-#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio"
-
-struct brcmfmac_sdio_platform_data {
- unsigned int drive_strength;
- bool oob_irq_supported;
- unsigned int oob_irq_nr;
- unsigned long oob_irq_flags;
- bool broken_sg_support;
- unsigned short sd_head_align;
- unsigned short sd_sgentry_align;
- void (*power_on)(void);
- void (*power_off)(void);
- void (*reset)(void);
-};
-
-#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
--- /dev/null
+++ b/include/linux/platform_data/brcmfmac.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 201 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+#define _LINUX_BRCMFMAC_PLATFORM_H
+
+
+#define BRCMFMAC_PDATA_NAME "brcmfmac"
+
+#define BRCMFMAC_COUNTRY_BUF_SZ 4
+
+
+/*
+ * Platform specific driver functions and data. Through the platform specific
+ * device data functions and data can be provided to help the brcmfmac driver to
+ * operate with the device in combination with the used platform.
+ */
+
+
+/**
+ * Note: the brcmfmac can be loaded as module or be statically built-in into
+ * the kernel. If built-in then do note that it uses module_init (and
+ * module_exit) routines which equal device_initcall. So if you intend to
+ * create a module with the platform specific data for the brcmfmac and have
+ * it built-in to the kernel then use a higher initcall then device_initcall
+ * (see init.h). If this is not done then brcmfmac will load without problems
+ * but will not pickup the platform data.
+ *
+ * When the driver does not "detect" platform driver data then it will continue
+ * without reporting anything and just assume there is no data needed. Which is
+ * probably true for most platforms.
+ */
+
+/**
+ * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are
+ * supported.
+ */
+enum brcmf_bus_type {
+ BRCMF_BUSTYPE_SDIO,
+ BRCMF_BUSTYPE_USB,
+ BRCMF_BUSTYPE_PCIE
+};
+
+
+/**
+ * struct brcmfmac_sdio_pd - SDIO Device specific platform data.
+ *
+ * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be
+ * used.
+ * @drive_strength: is the preferred drive_strength to be used for the SDIO
+ * pins. If 0 then a default value will be used. This is
+ * the target drive strength, the exact drive strength
+ * which will be used depends on the capabilities of the
+ * device.
+ * @oob_irq_supported: does the board have support for OOB interrupts. SDIO
+ * in-band interrupts are relatively slow and for having
+ * less overhead on interrupt processing an out of band
+ * interrupt can be used. If the HW supports this then
+ * enable this by setting this field to true and configure
+ * the oob related fields.
+ * @oob_irq_nr,
+ * @oob_irq_flags: the OOB interrupt information. The values are used for
+ * registering the irq using request_irq function.
+ * @broken_sg_support: flag for broken sg list support of SDIO host controller.
+ * Set this to true if the SDIO host controller has higher
+ * align requirement than 32 bytes for each scatterlist
+ * item.
+ * @sd_head_align: alignment requirement for start of data buffer.
+ * @sd_sgentry_align: length alignment requirement for each sg entry.
+ * @reset: This function can get called if the device communication
+ * broke down. This functionality is particularly useful in
+ * case of SDIO type devices. It is possible to reset a
+ * dongle via sdio data interface, but it requires that
+ * this is fully functional. This function is chip/module
+ * specific and this function should return only after the
+ * complete reset has completed.
+ */
+struct brcmfmac_sdio_pd {
+ int txglomsz;
+ unsigned int drive_strength;
+ bool oob_irq_supported;
+ unsigned int oob_irq_nr;
+ unsigned long oob_irq_flags;
+ bool broken_sg_support;
+ unsigned short sd_head_align;
+ unsigned short sd_sgentry_align;
+ void (*reset)(void);
+};
+
+/**
+ * struct brcmfmac_pd_cc_entry - Struct for translating user space country code
+ * (iso3166) to firmware country code and
+ * revision.
+ *
+ * @iso3166: iso3166 alpha 2 country code string.
+ * @cc: firmware country code string.
+ * @rev: firmware country code revision.
+ */
+struct brcmfmac_pd_cc_entry {
+ char iso3166[BRCMFMAC_COUNTRY_BUF_SZ];
+ char cc[BRCMFMAC_COUNTRY_BUF_SZ];
+ s32 rev;
+};
+
+/**
+ * struct brcmfmac_pd_cc - Struct for translating country codes as set by user
+ * space to a country code and rev which can be used by
+ * firmware.
+ *
+ * @table_size: number of entries in table (> 0)
+ * @table: array of 1 or more elements with translation information.
+ */
+struct brcmfmac_pd_cc {
+ int table_size;
+ struct brcmfmac_pd_cc_entry table[0];
+};
+
+/**
+ * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type)
+ * is the unique identifier of the device.
+ *
+ * @id: ID of the device for which this data is. In case of SDIO
+ * or PCIE this is the chipid as identified by chip.c In
+ * case of USB this is the chipid as identified by the
+ * device query.
+ * @rev: chip revision, see id.
+ * @bus_type: The type of bus. Some chipid/rev exist for different bus
+ * types. Each bus type has its own set of settings.
+ * @feature_disable: Bitmask of features to disable (override), See feature.c
+ * in brcmfmac for details.
+ * @country_codes: If available, pointer to struct for translating country
+ * codes.
+ * @bus: Bus specific (union) device settings. Currently only
+ * SDIO.
+ */
+struct brcmfmac_pd_device {
+ unsigned int id;
+ unsigned int rev;
+ enum brcmf_bus_type bus_type;
+ unsigned int feature_disable;
+ struct brcmfmac_pd_cc *country_codes;
+ union {
+ struct brcmfmac_sdio_pd sdio;
+ } bus;
+};
+
+/**
+ * struct brcmfmac_platform_data - BRCMFMAC specific platform data.
+ *
+ * @power_on: This function is called by the brcmfmac driver when the module
+ * gets loaded. This can be particularly useful for low power
+ * devices. The platform spcific routine may for example decide to
+ * power up the complete device. If there is no use-case for this
+ * function then provide NULL.
+ * @power_off: This function is called by the brcmfmac when the module gets
+ * unloaded. At this point the devices can be powered down or
+ * otherwise be reset. So if an actual power_off is not supported
+ * but reset is supported by the devices then reset the devices
+ * when this function gets called. This can be particularly useful
+ * for low power devices. If there is no use-case for this
+ * function then provide NULL.
+ */
+struct brcmfmac_platform_data {
+ void (*power_on)(void);
+ void (*power_off)(void);
+ char *fw_alternative_path;
+ int device_count;
+ struct brcmfmac_pd_device devices[0];
+};
+
+
+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */

View File

@ -1,607 +0,0 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:08 +0100
Subject: [PATCH] brcmfmac: merge platform data and module paramaters
Merge module parameters and platform data in one struct. This is the
last step to move to the new platform data per device. Now parameters
of platform data will be merged with module parameters per device.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -109,8 +109,8 @@ int brcmf_sdiod_intr_register(struct brc
u32 addr, gpiocontrol;
unsigned long flags;
- pdata = sdiodev->pdata;
- if ((pdata) && (pdata->oob_irq_supported)) {
+ pdata = &sdiodev->settings->bus.sdio;
+ if (pdata->oob_irq_supported) {
brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
pdata->oob_irq_nr);
ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
@@ -177,8 +177,8 @@ int brcmf_sdiod_intr_unregister(struct b
brcmf_dbg(SDIO, "Entering\n");
- pdata = sdiodev->pdata;
- if ((pdata) && (pdata->oob_irq_supported)) {
+ pdata = &sdiodev->settings->bus.sdio;
+ if (pdata->oob_irq_supported) {
sdio_claim_host(sdiodev->func[1]);
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
@@ -522,7 +522,7 @@ static int brcmf_sdiod_sglist_rw(struct
target_list = pktlist;
/* for host with broken sg support, prepare a page aligned list */
__skb_queue_head_init(&local_list);
- if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
+ if (!write && sdiodev->settings->bus.sdio.broken_sg_support) {
req_sz = 0;
skb_queue_walk(pktlist, pkt_next)
req_sz += pkt_next->len;
@@ -629,7 +629,7 @@ static int brcmf_sdiod_sglist_rw(struct
}
}
- if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
+ if (!write && sdiodev->settings->bus.sdio.broken_sg_support) {
local_pkt_next = local_list.next;
orig_offset = 0;
skb_queue_walk(pktlist, pkt_next) {
@@ -900,7 +900,7 @@ void brcmf_sdiod_sgtable_alloc(struct br
return;
nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE,
- sdiodev->bus_if->drvr->settings->sdiod_txglomsz);
+ sdiodev->settings->bus.sdio.txglomsz);
nents += (nents >> 4) + 1;
WARN_ON(nents > sdiodev->max_segment_count);
@@ -912,7 +912,7 @@ void brcmf_sdiod_sgtable_alloc(struct br
sdiodev->sg_support = false;
}
- sdiodev->txglomsz = sdiodev->bus_if->drvr->settings->sdiod_txglomsz;
+ sdiodev->txglomsz = sdiodev->settings->bus.sdio.txglomsz;
}
#ifdef CONFIG_PM_SLEEP
@@ -1246,8 +1246,8 @@ static int brcmf_ops_sdio_suspend(struct
sdio_flags = MMC_PM_KEEP_POWER;
if (sdiodev->wowl_enabled) {
- if (sdiodev->pdata->oob_irq_supported)
- enable_irq_wake(sdiodev->pdata->oob_irq_nr);
+ if (sdiodev->settings->bus.sdio.oob_irq_supported)
+ enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
else
sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -43,6 +43,8 @@ enum brcmf_bus_protocol_type {
BRCMF_PROTO_MSGBUF
};
+struct brcmf_mp_device;
+
struct brcmf_bus_dcmd {
char *name;
char *param;
@@ -217,7 +219,7 @@ bool brcmf_c_prec_enq(struct device *dev
void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
/* Indication from bus module regarding presence/insertion of dongle. */
-int brcmf_attach(struct device *dev);
+int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings);
/* Indication from bus module regarding removal/absence of dongle */
void brcmf_detach(struct device *dev);
/* Indication from bus module that dongle should be reset */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -243,14 +243,35 @@ static void brcmf_mp_attach(void)
}
}
-struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
- enum brcmf_bus_type bus_type,
- u32 chip, u32 chiprev)
+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
+ enum brcmf_bus_type bus_type,
+ u32 chip, u32 chiprev)
{
- struct brcmfmac_sdio_pd *pdata;
+ struct brcmf_mp_device *settings;
struct brcmfmac_pd_device *device_pd;
+ bool found;
int i;
+ brcmf_dbg(INFO, "Enter, bus=%d, chip=%d, rev=%d\n", bus_type, chip,
+ chiprev);
+ settings = kzalloc(sizeof(*settings), GFP_ATOMIC);
+ if (!settings)
+ return NULL;
+
+ /* start by using the module paramaters */
+ settings->p2p_enable = !!brcmf_p2p_enable;
+ settings->feature_disable = brcmf_feature_disable;
+ settings->fcmode = brcmf_fcmode;
+ settings->roamoff = !!brcmf_roamoff;
+#ifdef DEBUG
+ settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
+#endif
+
+ if (bus_type == BRCMF_BUSTYPE_SDIO)
+ settings->bus.sdio.txglomsz = brcmf_sdiod_txglomsz;
+
+ /* See if there is any device specific platform data configured */
+ found = false;
if (brcmfmac_pdata) {
for (i = 0; i < brcmfmac_pdata->device_count; i++) {
device_pd = &brcmfmac_pdata->devices[i];
@@ -259,38 +280,29 @@ struct brcmfmac_sdio_pd *brcmf_get_modul
((device_pd->rev == chiprev) ||
(device_pd->rev == -1))) {
brcmf_dbg(INFO, "Platform data for device found\n");
+ settings->country_codes =
+ device_pd->country_codes;
if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
- return &device_pd->bus.sdio;
+ memcpy(&settings->bus.sdio,
+ &device_pd->bus.sdio,
+ sizeof(settings->bus.sdio));
+ found = true;
break;
}
}
}
- pdata = NULL;
- brcmf_of_probe(dev, &pdata);
-
- return pdata;
-}
-
-int brcmf_mp_device_attach(struct brcmf_pub *drvr)
-{
- drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
- if (!drvr->settings)
- return -ENOMEM;
-
- drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz;
- drvr->settings->p2p_enable = !!brcmf_p2p_enable;
- drvr->settings->feature_disable = brcmf_feature_disable;
- drvr->settings->fcmode = brcmf_fcmode;
- drvr->settings->roamoff = !!brcmf_roamoff;
-#ifdef DEBUG
- drvr->settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
-#endif
- return 0;
+ if ((bus_type == BRCMF_BUSTYPE_SDIO) && (!found)) {
+ /* No platform data for this device. In case of SDIO try OF
+ * (Open Firwmare) Device Tree.
+ */
+ brcmf_of_probe(dev, &settings->bus.sdio);
+ }
+ return settings;
}
-void brcmf_mp_device_detach(struct brcmf_pub *drvr)
+void brcmf_release_module_param(struct brcmf_mp_device *module_param)
{
- kfree(drvr->settings);
+ kfree(module_param);
}
static int __init brcmf_common_pd_probe(struct platform_device *pdev)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -45,41 +45,30 @@ extern struct brcmf_mp_global_t brcmf_mp
/**
* struct brcmf_mp_device - Device module paramaters.
*
- * @sdiod_txglomsz: SDIO txglom size.
- * @joinboost_5g_rssi: 5g rssi booost for preferred join selection.
* @p2p_enable: Legacy P2P0 enable (old wpa_supplicant).
* @feature_disable: Feature_disable bitmask.
* @fcmode: FWS flow control.
* @roamoff: Firmware roaming off?
+ * @ignore_probe_fail: Ignore probe failure.
* @country_codes: If available, pointer to struct for translating country codes
+ * @bus: Bus specific platform data. Only SDIO at the mmoment.
*/
struct brcmf_mp_device {
- int sdiod_txglomsz;
- int joinboost_5g_rssi;
- bool p2p_enable;
- int feature_disable;
- int fcmode;
- bool roamoff;
- bool ignore_probe_fail;
+ bool p2p_enable;
+ unsigned int feature_disable;
+ int fcmode;
+ bool roamoff;
+ bool ignore_probe_fail;
struct brcmfmac_pd_cc *country_codes;
+ union {
+ struct brcmfmac_sdio_pd sdio;
+ } bus;
};
-struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
- enum brcmf_bus_type bus_type,
- u32 chip, u32 chiprev);
-int brcmf_mp_device_attach(struct brcmf_pub *drvr);
-void brcmf_mp_device_detach(struct brcmf_pub *drvr);
-#ifdef DEBUG
-static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr)
-{
- return drvr->settings->ignore_probe_fail;
-}
-#else
-static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr)
-{
- return false;
-}
-#endif
+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
+ enum brcmf_bus_type bus_type,
+ u32 chip, u32 chiprev);
+void brcmf_release_module_param(struct brcmf_mp_device *module_param);
/* Sets dongle media info (drv_version, mac address). */
int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -1104,7 +1104,7 @@ static int brcmf_inet6addr_changed(struc
}
#endif
-int brcmf_attach(struct device *dev)
+int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings)
{
struct brcmf_pub *drvr = NULL;
int ret = 0;
@@ -1126,10 +1126,7 @@ int brcmf_attach(struct device *dev)
drvr->hdrlen = 0;
drvr->bus_if = dev_get_drvdata(dev);
drvr->bus_if->drvr = drvr;
-
- /* Initialize device specific settings */
- if (brcmf_mp_device_attach(drvr))
- goto fail;
+ drvr->settings = settings;
/* attach debug facilities */
brcmf_debug_attach(drvr);
@@ -1274,7 +1271,7 @@ fail:
brcmf_net_detach(p2p_ifp->ndev);
drvr->iflist[0] = NULL;
drvr->iflist[1] = NULL;
- if (brcmf_ignoring_probe_fail(drvr))
+ if (drvr->settings->ignore_probe_fail)
ret = 0;
return ret;
@@ -1350,8 +1347,6 @@ void brcmf_detach(struct device *dev)
brcmf_proto_detach(drvr);
- brcmf_mp_device_detach(drvr);
-
brcmf_debug_detach(drvr);
bus_if->drvr = NULL;
kfree(drvr);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -23,7 +23,7 @@
#include "common.h"
#include "of.h"
-void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio)
{
struct device_node *np = dev->of_node;
int irq;
@@ -33,12 +33,8 @@ void brcmf_of_probe(struct device *dev,
if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
return;
- *sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL);
- if (!(*sdio))
- return;
-
if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
- (*sdio)->drive_strength = val;
+ sdio->drive_strength = val;
/* make sure there are interrupts defined in the node */
if (!of_find_property(np, "interrupts", NULL))
@@ -51,7 +47,7 @@ void brcmf_of_probe(struct device *dev,
}
irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
- (*sdio)->oob_irq_supported = true;
- (*sdio)->oob_irq_nr = irq;
- (*sdio)->oob_irq_flags = irqf;
+ sdio->oob_irq_supported = true;
+ sdio->oob_irq_nr = irq;
+ sdio->oob_irq_flags = irqf;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
@@ -14,10 +14,9 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifdef CONFIG_OF
-void
-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio);
+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio);
#else
-static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
+static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio)
{
}
#endif /* CONFIG_OF */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -37,6 +37,8 @@
#include "pcie.h"
#include "firmware.h"
#include "chip.h"
+#include "core.h"
+#include "common.h"
enum brcmf_pcie_state {
@@ -266,6 +268,7 @@ struct brcmf_pciedev_info {
u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset);
void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
u16 value);
+ struct brcmf_mp_device *settings;
};
struct brcmf_pcie_ringbuf {
@@ -1525,16 +1528,16 @@ static void brcmf_pcie_release_resource(
}
-static int brcmf_pcie_attach_bus(struct device *dev)
+static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo)
{
int ret;
/* Attach to the common driver interface */
- ret = brcmf_attach(dev);
+ ret = brcmf_attach(&devinfo->pdev->dev, devinfo->settings);
if (ret) {
brcmf_err("brcmf_attach failed\n");
} else {
- ret = brcmf_bus_start(dev);
+ ret = brcmf_bus_start(&devinfo->pdev->dev);
if (ret)
brcmf_err("dongle is not responding\n");
}
@@ -1672,7 +1675,7 @@ static void brcmf_pcie_setup(struct devi
init_waitqueue_head(&devinfo->mbdata_resp_wait);
brcmf_pcie_intr_enable(devinfo);
- if (brcmf_pcie_attach_bus(bus->dev) == 0)
+ if (brcmf_pcie_attach_bus(devinfo) == 0)
return;
brcmf_pcie_bus_console_read(devinfo);
@@ -1716,6 +1719,15 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
goto fail;
}
+ devinfo->settings = brcmf_get_module_param(&devinfo->pdev->dev,
+ BRCMF_BUSTYPE_PCIE,
+ devinfo->ci->chip,
+ devinfo->ci->chiprev);
+ if (!devinfo->settings) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
bus = kzalloc(sizeof(*bus), GFP_KERNEL);
if (!bus) {
ret = -ENOMEM;
@@ -1760,6 +1772,8 @@ fail:
brcmf_pcie_release_resource(devinfo);
if (devinfo->ci)
brcmf_chip_detach(devinfo->ci);
+ if (devinfo->settings)
+ brcmf_release_module_param(devinfo->settings);
kfree(pcie_bus_dev);
kfree(devinfo);
return ret;
@@ -1799,6 +1813,8 @@ brcmf_pcie_remove(struct pci_dev *pdev)
if (devinfo->ci)
brcmf_chip_detach(devinfo->ci);
+ if (devinfo->settings)
+ brcmf_release_module_param(devinfo->settings);
kfree(devinfo);
dev_set_drvdata(&pdev->dev, NULL);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -2442,15 +2442,17 @@ static void brcmf_sdio_bus_stop(struct d
static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
{
+ struct brcmf_sdio_dev *sdiodev;
unsigned long flags;
- if (bus->sdiodev->oob_irq_requested) {
- spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
- if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
- enable_irq(bus->sdiodev->pdata->oob_irq_nr);
- bus->sdiodev->irq_en = true;
+ sdiodev = bus->sdiodev;
+ if (sdiodev->oob_irq_requested) {
+ spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
+ if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) {
+ enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr);
+ sdiodev->irq_en = true;
}
- spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
+ spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
}
}
@@ -3394,9 +3396,7 @@ static int brcmf_sdio_bus_preinit(struct
sizeof(u32));
} else {
/* otherwise, set txglomalign */
- value = 4;
- if (sdiodev->pdata)
- value = sdiodev->pdata->sd_sgentry_align;
+ value = sdiodev->settings->bus.sdio.sd_sgentry_align;
/* SDIO ADMA requires at least 32 bit alignment */
value = max_t(u32, value, 4);
err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
@@ -3811,21 +3811,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
bus->ci = NULL;
goto fail;
}
- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
+ sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
BRCMF_BUSTYPE_SDIO,
bus->ci->chip,
bus->ci->chiprev);
+ if (!sdiodev->settings) {
+ brcmf_err("Failed to get device parameters\n");
+ goto fail;
+ }
/* platform specific configuration:
* alignments must be at least 4 bytes for ADMA
*/
bus->head_align = ALIGNMENT;
bus->sgentry_align = ALIGNMENT;
- if (sdiodev->pdata) {
- if (sdiodev->pdata->sd_head_align > ALIGNMENT)
- bus->head_align = sdiodev->pdata->sd_head_align;
- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
- }
+ if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT)
+ bus->head_align = sdiodev->settings->bus.sdio.sd_head_align;
+ if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT)
+ bus->sgentry_align =
+ sdiodev->settings->bus.sdio.sd_sgentry_align;
+
/* allocate scatter-gather table. sg support
* will be disabled upon allocation failure.
*/
@@ -3837,7 +3841,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
*/
if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
+ (sdiodev->settings->bus.sdio.oob_irq_supported)))
sdiodev->bus_if->wowl_supported = true;
#endif
@@ -3846,8 +3850,8 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
goto fail;
}
- if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
- drivestrength = sdiodev->pdata->drive_strength;
+ if (sdiodev->settings->bus.sdio.drive_strength)
+ drivestrength = sdiodev->settings->bus.sdio.drive_strength;
else
drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
@@ -4124,7 +4128,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
/* Attach to the common layer, reserve hdr space */
- ret = brcmf_attach(bus->sdiodev->dev);
+ ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings);
if (ret != 0) {
brcmf_err("brcmf_attach failed\n");
goto fail;
@@ -4228,6 +4232,8 @@ void brcmf_sdio_remove(struct brcmf_sdio
}
brcmf_chip_detach(bus->ci);
}
+ if (bus->sdiodev->settings)
+ brcmf_release_module_param(bus->sdiodev->settings);
kfree(bus->rxbuf);
kfree(bus->hdrbuf);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -184,7 +184,7 @@ struct brcmf_sdio_dev {
struct brcmf_sdio *bus;
struct device *dev;
struct brcmf_bus *bus_if;
- struct brcmfmac_sdio_pd *pdata;
+ struct brcmf_mp_device *settings;
bool oob_irq_requested;
bool irq_en; /* irq enable flags */
spinlock_t irq_en_lock;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -27,6 +27,8 @@
#include "debug.h"
#include "firmware.h"
#include "usb.h"
+#include "core.h"
+#include "common.h"
#define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000)
@@ -171,6 +173,7 @@ struct brcmf_usbdev_info {
struct urb *bulk_urb; /* used for FW download */
bool wowl_enabled;
+ struct brcmf_mp_device *settings;
};
static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
@@ -1027,6 +1030,9 @@ static void brcmf_usb_detach(struct brcm
kfree(devinfo->tx_reqs);
kfree(devinfo->rx_reqs);
+
+ if (devinfo->settings)
+ brcmf_release_module_param(devinfo->settings);
}
@@ -1136,7 +1142,7 @@ static int brcmf_usb_bus_setup(struct br
int ret;
/* Attach to the common driver interface */
- ret = brcmf_attach(devinfo->dev);
+ ret = brcmf_attach(devinfo->dev, devinfo->settings);
if (ret) {
brcmf_err("brcmf_attach failed\n");
return ret;
@@ -1223,6 +1229,14 @@ static int brcmf_usb_probe_cb(struct brc
bus->wowl_supported = true;
#endif
+ devinfo->settings = brcmf_get_module_param(bus->dev, BRCMF_BUSTYPE_USB,
+ bus_pub->devid,
+ bus_pub->chiprev);
+ if (!devinfo->settings) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
if (!brcmf_usb_dlneeded(devinfo)) {
ret = brcmf_usb_bus_setup(devinfo);
if (ret)

View File

@ -1,227 +0,0 @@
From: Hante Meuleman <hante.meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:09 +0100
Subject: [PATCH] brcmfmac: integrate add_keyext in add_key
brcmf_add_keyext is called when a key is configured for a specific
mac address. This function is very similar to the calling function
brcmf_add_key. Integrate this function and also use existing del_key
function in case key is to be cleared.
Reviewed-by: Arend Van Spriel <arend.van@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2073,84 +2073,34 @@ done:
}
static s32
-brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_idx, const u8 *mac_addr, struct key_params *params)
+brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+ u8 key_idx, bool pairwise, const u8 *mac_addr)
{
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_wsec_key key;
s32 err = 0;
- u8 keybuf[8];
+
+ brcmf_dbg(TRACE, "Enter\n");
+ if (!check_vif_up(ifp->vif))
+ return -EIO;
+
+ if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
+ /* we ignore this key index in this case */
+ return -EINVAL;
+ }
memset(&key, 0, sizeof(key));
- key.index = (u32) key_idx;
- /* Instead of bcast for ea address for default wep keys,
- driver needs it to be Null */
- if (!is_multicast_ether_addr(mac_addr))
- memcpy((char *)&key.ea, (void *)mac_addr, ETH_ALEN);
- key.len = (u32) params->key_len;
- /* check for key index change */
- if (key.len == 0) {
- /* key delete */
- err = send_key_to_dongle(ifp, &key);
- if (err)
- brcmf_err("key delete error (%d)\n", err);
- } else {
- if (key.len > sizeof(key.data)) {
- brcmf_err("Invalid key length (%d)\n", key.len);
- return -EINVAL;
- }
- brcmf_dbg(CONN, "Setting the key index %d\n", key.index);
- memcpy(key.data, params->key, key.len);
+ key.index = (u32)key_idx;
+ key.flags = BRCMF_PRIMARY_KEY;
+ key.algo = CRYPTO_ALGO_OFF;
- if (!brcmf_is_apmode(ifp->vif) &&
- (params->cipher == WLAN_CIPHER_SUITE_TKIP)) {
- brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
- memcpy(keybuf, &key.data[24], sizeof(keybuf));
- memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
- memcpy(&key.data[16], keybuf, sizeof(keybuf));
- }
+ brcmf_dbg(CONN, "key index (%d)\n", key_idx);
- /* if IW_ENCODE_EXT_RX_SEQ_VALID set */
- if (params->seq && params->seq_len == 6) {
- /* rx iv */
- u8 *ivptr;
- ivptr = (u8 *) params->seq;
- key.rxiv.hi = (ivptr[5] << 24) | (ivptr[4] << 16) |
- (ivptr[3] << 8) | ivptr[2];
- key.rxiv.lo = (ivptr[1] << 8) | ivptr[0];
- key.iv_initialized = true;
- }
+ /* Set the new key/index */
+ err = send_key_to_dongle(ifp, &key);
- switch (params->cipher) {
- case WLAN_CIPHER_SUITE_WEP40:
- key.algo = CRYPTO_ALGO_WEP1;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n");
- break;
- case WLAN_CIPHER_SUITE_WEP104:
- key.algo = CRYPTO_ALGO_WEP128;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
- break;
- case WLAN_CIPHER_SUITE_TKIP:
- key.algo = CRYPTO_ALGO_TKIP;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
- key.algo = CRYPTO_ALGO_AES_CCM;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
- break;
- case WLAN_CIPHER_SUITE_CCMP:
- key.algo = CRYPTO_ALGO_AES_CCM;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n");
- break;
- default:
- brcmf_err("Invalid cipher (0x%x)\n", params->cipher);
- return -EINVAL;
- }
- err = send_key_to_dongle(ifp, &key);
- if (err)
- brcmf_err("wsec_key error (%d)\n", err);
- }
+ brcmf_dbg(TRACE, "Exit\n");
return err;
}
@@ -2163,8 +2113,9 @@ brcmf_cfg80211_add_key(struct wiphy *wip
struct brcmf_wsec_key *key;
s32 val;
s32 wsec;
- s32 err = 0;
+ s32 err;
u8 keybuf[8];
+ bool ext_key;
brcmf_dbg(TRACE, "Enter\n");
brcmf_dbg(CONN, "key index (%d)\n", key_idx);
@@ -2177,27 +2128,32 @@ brcmf_cfg80211_add_key(struct wiphy *wip
return -EINVAL;
}
- if (mac_addr &&
- (params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
- (params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
- brcmf_dbg(TRACE, "Exit");
- return brcmf_add_keyext(wiphy, ndev, key_idx, mac_addr, params);
- }
-
- key = &ifp->vif->profile.key[key_idx];
- memset(key, 0, sizeof(*key));
+ if (params->key_len == 0)
+ return brcmf_cfg80211_del_key(wiphy, ndev, key_idx, pairwise,
+ mac_addr);
if (params->key_len > sizeof(key->data)) {
brcmf_err("Too long key length (%u)\n", params->key_len);
- err = -EINVAL;
- goto done;
+ return -EINVAL;
+ }
+
+ ext_key = false;
+ if (mac_addr && (params->cipher != WLAN_CIPHER_SUITE_WEP40) &&
+ (params->cipher != WLAN_CIPHER_SUITE_WEP104)) {
+ brcmf_dbg(TRACE, "Ext key, mac %pM", mac_addr);
+ ext_key = true;
}
+
+ key = &ifp->vif->profile.key[key_idx];
+ memset(key, 0, sizeof(*key));
+ if ((ext_key) && (!is_multicast_ether_addr(mac_addr)))
+ memcpy((char *)&key->ea, (void *)mac_addr, ETH_ALEN);
key->len = params->key_len;
key->index = key_idx;
-
memcpy(key->data, params->key, key->len);
+ if (!ext_key)
+ key->flags = BRCMF_PRIMARY_KEY;
- key->flags = BRCMF_PRIMARY_KEY;
switch (params->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
key->algo = CRYPTO_ALGO_WEP1;
@@ -2237,7 +2193,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
}
err = send_key_to_dongle(ifp, key);
- if (err)
+ if (ext_key || err)
goto done;
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
@@ -2256,38 +2212,6 @@ done:
brcmf_dbg(TRACE, "Exit\n");
return err;
}
-
-static s32
-brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_idx, bool pairwise, const u8 *mac_addr)
-{
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_wsec_key key;
- s32 err = 0;
-
- brcmf_dbg(TRACE, "Enter\n");
- if (!check_vif_up(ifp->vif))
- return -EIO;
-
- if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
- /* we ignore this key index in this case */
- return -EINVAL;
- }
-
- memset(&key, 0, sizeof(key));
-
- key.index = (u32) key_idx;
- key.flags = BRCMF_PRIMARY_KEY;
- key.algo = CRYPTO_ALGO_OFF;
-
- brcmf_dbg(CONN, "key index (%d)\n", key_idx);
-
- /* Set the new key/index */
- err = send_key_to_dongle(ifp, &key);
-
- brcmf_dbg(TRACE, "Exit\n");
- return err;
-}
static s32
brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,

View File

@ -1,509 +0,0 @@
From: Hante Meuleman <hante.meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:27:10 +0100
Subject: [PATCH] brcmfmac: add 802.11w management frame protection support
Add full support for both AP and STA for management frame protection.
Reviewed-by: Arend Van Spriel <arend.van@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -72,8 +72,13 @@
#define RSN_AKM_NONE 0 /* None (IBSS) */
#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */
#define RSN_AKM_PSK 2 /* Pre-shared Key */
+#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */
+#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */
#define RSN_CAP_LEN 2 /* Length of RSN capabilities */
-#define RSN_CAP_PTK_REPLAY_CNTR_MASK 0x000C
+#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3))
+#define RSN_CAP_MFPR_MASK BIT(6)
+#define RSN_CAP_MFPC_MASK BIT(7)
+#define RSN_PMKID_COUNT_LEN 2
#define VNDR_IE_CMD_LEN 4 /* length of the set command
* string :"add", "del" (+ NUL)
@@ -211,12 +216,19 @@ static const struct ieee80211_regdomain
REG_RULE(5470-10, 5850+10, 80, 6, 20, 0), }
};
-static const u32 __wl_cipher_suites[] = {
+/* Note: brcmf_cipher_suites is an array of int defining which cipher suites
+ * are supported. A pointer to this array and the number of entries is passed
+ * on to upper layers. AES_CMAC defines whether or not the driver supports MFP.
+ * So the cipher suite AES_CMAC has to be the last one in the array, and when
+ * device does not support MFP then the number of suites will be decreased by 1
+ */
+static const u32 brcmf_cipher_suites[] = {
WLAN_CIPHER_SUITE_WEP40,
WLAN_CIPHER_SUITE_WEP104,
WLAN_CIPHER_SUITE_TKIP,
WLAN_CIPHER_SUITE_CCMP,
- WLAN_CIPHER_SUITE_AES_CMAC,
+ /* Keep as last entry: */
+ WLAN_CIPHER_SUITE_AES_CMAC
};
/* Vendor specific ie. id = 221, oui and type defines exact ie */
@@ -1533,7 +1545,7 @@ static s32 brcmf_set_auth_type(struct ne
static s32
brcmf_set_wsec_mode(struct net_device *ndev,
- struct cfg80211_connect_params *sme, bool mfp)
+ struct cfg80211_connect_params *sme)
{
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
struct brcmf_cfg80211_security *sec;
@@ -1592,10 +1604,7 @@ brcmf_set_wsec_mode(struct net_device *n
sme->privacy)
pval = AES_ENABLED;
- if (mfp)
- wsec = pval | gval | MFP_CAPABLE;
- else
- wsec = pval | gval;
+ wsec = pval | gval;
err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec);
if (err) {
brcmf_err("error (%d)\n", err);
@@ -1612,56 +1621,100 @@ brcmf_set_wsec_mode(struct net_device *n
static s32
brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
{
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
- struct brcmf_cfg80211_security *sec;
- s32 val = 0;
- s32 err = 0;
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ s32 val;
+ s32 err;
+ const struct brcmf_tlv *rsn_ie;
+ const u8 *ie;
+ u32 ie_len;
+ u32 offset;
+ u16 rsn_cap;
+ u32 mfp;
+ u16 count;
- if (sme->crypto.n_akm_suites) {
- err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev),
- "wpa_auth", &val);
- if (err) {
- brcmf_err("could not get wpa_auth (%d)\n", err);
- return err;
+ if (!sme->crypto.n_akm_suites)
+ return 0;
+
+ err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val);
+ if (err) {
+ brcmf_err("could not get wpa_auth (%d)\n", err);
+ return err;
+ }
+ if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
+ switch (sme->crypto.akm_suites[0]) {
+ case WLAN_AKM_SUITE_8021X:
+ val = WPA_AUTH_UNSPECIFIED;
+ break;
+ case WLAN_AKM_SUITE_PSK:
+ val = WPA_AUTH_PSK;
+ break;
+ default:
+ brcmf_err("invalid cipher group (%d)\n",
+ sme->crypto.cipher_group);
+ return -EINVAL;
}
- if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
- switch (sme->crypto.akm_suites[0]) {
- case WLAN_AKM_SUITE_8021X:
- val = WPA_AUTH_UNSPECIFIED;
- break;
- case WLAN_AKM_SUITE_PSK:
- val = WPA_AUTH_PSK;
- break;
- default:
- brcmf_err("invalid cipher group (%d)\n",
- sme->crypto.cipher_group);
- return -EINVAL;
- }
- } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
- switch (sme->crypto.akm_suites[0]) {
- case WLAN_AKM_SUITE_8021X:
- val = WPA2_AUTH_UNSPECIFIED;
- break;
- case WLAN_AKM_SUITE_PSK:
- val = WPA2_AUTH_PSK;
- break;
- default:
- brcmf_err("invalid cipher group (%d)\n",
- sme->crypto.cipher_group);
- return -EINVAL;
- }
+ } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
+ switch (sme->crypto.akm_suites[0]) {
+ case WLAN_AKM_SUITE_8021X:
+ val = WPA2_AUTH_UNSPECIFIED;
+ break;
+ case WLAN_AKM_SUITE_8021X_SHA256:
+ val = WPA2_AUTH_1X_SHA256;
+ break;
+ case WLAN_AKM_SUITE_PSK_SHA256:
+ val = WPA2_AUTH_PSK_SHA256;
+ break;
+ case WLAN_AKM_SUITE_PSK:
+ val = WPA2_AUTH_PSK;
+ break;
+ default:
+ brcmf_err("invalid cipher group (%d)\n",
+ sme->crypto.cipher_group);
+ return -EINVAL;
}
+ }
- brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev),
- "wpa_auth", val);
- if (err) {
- brcmf_err("could not set wpa_auth (%d)\n", err);
- return err;
- }
+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
+ goto skip_mfp_config;
+ /* The MFP mode (1 or 2) needs to be determined, parse IEs. The
+ * IE will not be verified, just a quick search for MFP config
+ */
+ rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, sme->ie_len,
+ WLAN_EID_RSN);
+ if (!rsn_ie)
+ goto skip_mfp_config;
+ ie = (const u8 *)rsn_ie;
+ ie_len = rsn_ie->len + TLV_HDR_LEN;
+ /* Skip unicast suite */
+ offset = TLV_HDR_LEN + WPA_IE_VERSION_LEN + WPA_IE_MIN_OUI_LEN;
+ if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len)
+ goto skip_mfp_config;
+ /* Skip multicast suite */
+ count = ie[offset] + (ie[offset + 1] << 8);
+ offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN);
+ if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len)
+ goto skip_mfp_config;
+ /* Skip auth key management suite(s) */
+ count = ie[offset] + (ie[offset + 1] << 8);
+ offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN);
+ if (offset + WPA_IE_SUITE_COUNT_LEN > ie_len)
+ goto skip_mfp_config;
+ /* Ready to read capabilities */
+ mfp = BRCMF_MFP_NONE;
+ rsn_cap = ie[offset] + (ie[offset + 1] << 8);
+ if (rsn_cap & RSN_CAP_MFPR_MASK)
+ mfp = BRCMF_MFP_REQUIRED;
+ else if (rsn_cap & RSN_CAP_MFPC_MASK)
+ mfp = BRCMF_MFP_CAPABLE;
+ brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "mfp", mfp);
+
+skip_mfp_config:
+ brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
+ err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val);
+ if (err) {
+ brcmf_err("could not set wpa_auth (%d)\n", err);
+ return err;
}
- sec = &profile->sec;
- sec->wpa_auth = sme->crypto.akm_suites[0];
return err;
}
@@ -1827,7 +1880,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
goto done;
}
- err = brcmf_set_wsec_mode(ndev, sme, sme->mfp == NL80211_MFP_REQUIRED);
+ err = brcmf_set_wsec_mode(ndev, sme);
if (err) {
brcmf_err("wl_set_set_cipher failed (%d)\n", err);
goto done;
@@ -2077,10 +2130,12 @@ brcmf_cfg80211_del_key(struct wiphy *wip
u8 key_idx, bool pairwise, const u8 *mac_addr)
{
struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_wsec_key key;
- s32 err = 0;
+ struct brcmf_wsec_key *key;
+ s32 err;
brcmf_dbg(TRACE, "Enter\n");
+ brcmf_dbg(CONN, "key index (%d)\n", key_idx);
+
if (!check_vif_up(ifp->vif))
return -EIO;
@@ -2089,16 +2144,19 @@ brcmf_cfg80211_del_key(struct wiphy *wip
return -EINVAL;
}
- memset(&key, 0, sizeof(key));
+ key = &ifp->vif->profile.key[key_idx];
- key.index = (u32)key_idx;
- key.flags = BRCMF_PRIMARY_KEY;
- key.algo = CRYPTO_ALGO_OFF;
+ if (key->algo == CRYPTO_ALGO_OFF) {
+ brcmf_dbg(CONN, "Ignore clearing of (never configured) key\n");
+ return -EINVAL;
+ }
- brcmf_dbg(CONN, "key index (%d)\n", key_idx);
+ memset(key, 0, sizeof(*key));
+ key->index = (u32)key_idx;
+ key->flags = BRCMF_PRIMARY_KEY;
- /* Set the new key/index */
- err = send_key_to_dongle(ifp, &key);
+ /* Clear the key/index */
+ err = send_key_to_dongle(ifp, key);
brcmf_dbg(TRACE, "Exit\n");
return err;
@@ -2106,8 +2164,8 @@ brcmf_cfg80211_del_key(struct wiphy *wip
static s32
brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_idx, bool pairwise, const u8 *mac_addr,
- struct key_params *params)
+ u8 key_idx, bool pairwise, const u8 *mac_addr,
+ struct key_params *params)
{
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_wsec_key *key;
@@ -2214,9 +2272,10 @@ done:
}
static s32
-brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie,
- void (*callback) (void *cookie, struct key_params * params))
+brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, u8 key_idx,
+ bool pairwise, const u8 *mac_addr, void *cookie,
+ void (*callback)(void *cookie,
+ struct key_params *params))
{
struct key_params params;
struct brcmf_if *ifp = netdev_priv(ndev);
@@ -2268,8 +2327,15 @@ done:
static s32
brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
- struct net_device *ndev, u8 key_idx)
+ struct net_device *ndev, u8 key_idx)
{
+ struct brcmf_if *ifp = netdev_priv(ndev);
+
+ brcmf_dbg(TRACE, "Enter key_idx %d\n", key_idx);
+
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
+ return 0;
+
brcmf_dbg(INFO, "Not supported\n");
return -EOPNOTSUPP;
@@ -3769,7 +3835,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
u32 auth = 0; /* d11 open authentication */
u16 count;
s32 err = 0;
- s32 len = 0;
+ s32 len;
u32 i;
u32 wsec;
u32 pval = 0;
@@ -3779,6 +3845,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
u8 *data;
u16 rsn_cap;
u32 wme_bss_disable;
+ u32 mfp;
brcmf_dbg(TRACE, "Enter\n");
if (wpa_ie == NULL)
@@ -3893,19 +3960,53 @@ brcmf_configure_wpaie(struct brcmf_if *i
is_rsn_ie ? (wpa_auth |= WPA2_AUTH_PSK) :
(wpa_auth |= WPA_AUTH_PSK);
break;
+ case RSN_AKM_SHA256_PSK:
+ brcmf_dbg(TRACE, "RSN_AKM_MFP_PSK\n");
+ wpa_auth |= WPA2_AUTH_PSK_SHA256;
+ break;
+ case RSN_AKM_SHA256_1X:
+ brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n");
+ wpa_auth |= WPA2_AUTH_1X_SHA256;
+ break;
default:
brcmf_err("Ivalid key mgmt info\n");
}
offset++;
}
+ mfp = BRCMF_MFP_NONE;
if (is_rsn_ie) {
wme_bss_disable = 1;
if ((offset + RSN_CAP_LEN) <= len) {
rsn_cap = data[offset] + (data[offset + 1] << 8);
if (rsn_cap & RSN_CAP_PTK_REPLAY_CNTR_MASK)
wme_bss_disable = 0;
+ if (rsn_cap & RSN_CAP_MFPR_MASK) {
+ brcmf_dbg(TRACE, "MFP Required\n");
+ mfp = BRCMF_MFP_REQUIRED;
+ /* Firmware only supports mfp required in
+ * combination with WPA2_AUTH_PSK_SHA256 or
+ * WPA2_AUTH_1X_SHA256.
+ */
+ if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 |
+ WPA2_AUTH_1X_SHA256))) {
+ err = -EINVAL;
+ goto exit;
+ }
+ /* Firmware has requirement that WPA2_AUTH_PSK/
+ * WPA2_AUTH_UNSPECIFIED be set, if SHA256 OUI
+ * is to be included in the rsn ie.
+ */
+ if (wpa_auth & WPA2_AUTH_PSK_SHA256)
+ wpa_auth |= WPA2_AUTH_PSK;
+ else if (wpa_auth & WPA2_AUTH_1X_SHA256)
+ wpa_auth |= WPA2_AUTH_UNSPECIFIED;
+ } else if (rsn_cap & RSN_CAP_MFPC_MASK) {
+ brcmf_dbg(TRACE, "MFP Capable\n");
+ mfp = BRCMF_MFP_CAPABLE;
+ }
}
+ offset += RSN_CAP_LEN;
/* set wme_bss_disable to sync RSN Capabilities */
err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable",
wme_bss_disable);
@@ -3913,6 +4014,21 @@ brcmf_configure_wpaie(struct brcmf_if *i
brcmf_err("wme_bss_disable error %d\n", err);
goto exit;
}
+
+ /* Skip PMKID cnt as it is know to be 0 for AP. */
+ offset += RSN_PMKID_COUNT_LEN;
+
+ /* See if there is BIP wpa suite left for MFP */
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP) &&
+ ((offset + WPA_IE_MIN_OUI_LEN) <= len)) {
+ err = brcmf_fil_bsscfg_data_set(ifp, "bip",
+ &data[offset],
+ WPA_IE_MIN_OUI_LEN);
+ if (err < 0) {
+ brcmf_err("bip error %d\n", err);
+ goto exit;
+ }
+ }
}
/* FOR WPS , set SES_OW_ENABLED */
wsec = (pval | gval | SES_OW_ENABLED);
@@ -3929,6 +4045,16 @@ brcmf_configure_wpaie(struct brcmf_if *i
brcmf_err("wsec error %d\n", err);
goto exit;
}
+ /* Configure MFP, this needs to go after wsec otherwise the wsec command
+ * will overwrite the values set by MFP
+ */
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) {
+ err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp);
+ if (err < 0) {
+ brcmf_err("mfp error %d\n", err);
+ goto exit;
+ }
+ }
/* set upper-layer auth */
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth);
if (err < 0) {
@@ -6149,8 +6275,10 @@ static int brcmf_setup_wiphy(struct wiph
wiphy->n_addresses = i;
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
- wiphy->cipher_suites = __wl_cipher_suites;
- wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites);
+ wiphy->cipher_suites = brcmf_cipher_suites;
+ wiphy->n_cipher_suites = ARRAY_SIZE(brcmf_cipher_suites);
+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP))
+ wiphy->n_cipher_suites--;
wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT |
WIPHY_FLAG_OFFCHAN_TX |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -72,7 +72,7 @@
#define BRCMF_VNDR_IE_P2PAF_SHIFT 12
-#define BRCMF_MAX_DEFAULT_KEYS 4
+#define BRCMF_MAX_DEFAULT_KEYS 6
/* beacon loss timeout defaults */
#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON 2
@@ -107,7 +107,6 @@ struct brcmf_cfg80211_security {
u32 auth_type;
u32 cipher_pairwise;
u32 cipher_group;
- u32 wpa_auth;
};
/**
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -161,6 +161,7 @@ void brcmf_feat_attach(struct brcmf_pub
ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS);
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode");
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable");
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp");
pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
err = brcmf_fil_iovar_data_get(ifp, "pfn_macaddr", &pfn_mac,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
@@ -30,6 +30,7 @@
* WOWL_ND: WOWL net detect (PNO)
* WOWL_GTK: (WOWL) GTK rekeying offload
* WOWL_ARP_ND: ARP and Neighbor Discovery offload support during WOWL.
+ * MFP: 802.11w Management Frame Protection.
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -42,7 +43,8 @@
BRCMF_FEAT_DEF(SCAN_RANDOM_MAC) \
BRCMF_FEAT_DEF(WOWL_ND) \
BRCMF_FEAT_DEF(WOWL_GTK) \
- BRCMF_FEAT_DEF(WOWL_ARP_ND)
+ BRCMF_FEAT_DEF(WOWL_ARP_ND) \
+ BRCMF_FEAT_DEF(MFP)
/*
* Quirks:
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -142,6 +142,10 @@
#define BRCMF_RSN_KEK_LENGTH 16
#define BRCMF_RSN_REPLAY_LEN 8
+#define BRCMF_MFP_NONE 0
+#define BRCMF_MFP_CAPABLE 1
+#define BRCMF_MFP_REQUIRED 2
+
/* join preference types for join_pref iovar */
enum brcmf_join_pref_types {
BRCMF_JOIN_PREF_RSSI = 1,
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
@@ -236,6 +236,8 @@ static inline bool ac_bitmap_tst(u8 bitm
#define WPA2_AUTH_RESERVED3 0x0200
#define WPA2_AUTH_RESERVED4 0x0400
#define WPA2_AUTH_RESERVED5 0x0800
+#define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */
+#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */
#define DOT11_DEFAULT_RTS_LEN 2347
#define DOT11_DEFAULT_FRAG_LEN 2346

View File

@ -1,54 +0,0 @@
From: Hui Wang <hui.wang@canonical.com>
Date: Wed, 9 Mar 2016 15:25:26 +0800
Subject: [PATCH] brcmfmac: Remove waitqueue_active check
We met a problem of pm_suspend when repeated closing/opening the lid
on a Lenovo laptop (1/20 reproduce rate), below is the log:
[ 199.735876] PM: Entering mem sleep
[ 199.750516] e1000e: EEE TX LPI TIMER: 00000011
[ 199.856638] Trying to free nonexistent resource <000000000000d000-000000000000d0ff>
[ 201.753566] brcmfmac: brcmf_pcie_suspend: Timeout on response for entering D3 substate
[ 201.753581] pci_legacy_suspend(): brcmf_pcie_suspend+0x0/0x1f0 [brcmfmac] returns -5
[ 201.753585] dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -5
[ 201.753589] PM: Device 0000:04:00.0 failed to suspend async: error -5
Through debugging, we found when problem happens, it is not the device
fails to enter D3, but the signal D3_ACK comes too early to pass the
waitqueue_active() check.
Just like this:
brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D3_INFORM);
// signal is triggered here
wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed,
BRCMF_PCIE_MBDATA_TIMEOUT);
So far I think it is safe to remove waitqueue_active check since there
is only one place to trigger this signal (sending
BRCMF_H2D_HOST_D3_INFORM). And it is not a problem calling wake_up
event earlier than calling wait_event.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -677,10 +677,8 @@ static void brcmf_pcie_handle_mb_data(st
brcmf_dbg(PCIE, "D2H_MB_DATA: DEEP SLEEP EXIT\n");
if (dtoh_mb_data & BRCMF_D2H_DEV_D3_ACK) {
brcmf_dbg(PCIE, "D2H_MB_DATA: D3 ACK\n");
- if (waitqueue_active(&devinfo->mbdata_resp_wait)) {
- devinfo->mbdata_completed = true;
- wake_up(&devinfo->mbdata_resp_wait);
- }
+ devinfo->mbdata_completed = true;
+ wake_up(&devinfo->mbdata_resp_wait);
}
}

View File

@ -1,21 +0,0 @@
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Tue, 15 Mar 2016 10:06:10 +0300
Subject: [PATCH] brcmfmac: uninitialized "ret" variable
There is an error path where "ret" isn't initialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -250,7 +250,7 @@ static int brcmf_sdiod_request_data(stru
u32 addr, u8 regsz, void *data, bool write)
{
struct sdio_func *func;
- int ret;
+ int ret = -EINVAL;
brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
write, fn, addr, regsz);

View File

@ -1,24 +0,0 @@
From: Colin Ian King <colin.king@canonical.com>
Date: Sun, 20 Mar 2016 17:34:52 +0000
Subject: [PATCH] brcmfmac: sdio: remove unused variable retry_limit
retry_limit has never been used during the life of this driver, so
we may as well remove it as it is redundant.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -535,9 +535,6 @@ static int qcount[NUMPRIO];
#define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
-/* Retry count for register access failures */
-static const uint retry_limit = 2;
-
/* Limit on rounding up frames */
static const uint max_roundup = 512;

View File

@ -1,26 +0,0 @@
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Fri, 18 Mar 2016 13:23:24 +1100
Subject: [PATCH] brcmfmac: Delete unnecessary variable initialisation
In brcmf_sdio_download_firmware(), bcmerror is set by the call to
brcmf_sdio_download_code_file(), before it's checked in the following
line.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Arend van Spriel <arend@broadcom.com>
[Rewrote commit message]
Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3258,7 +3258,7 @@ static int brcmf_sdio_download_firmware(
const struct firmware *fw,
void *nvram, u32 nvlen)
{
- int bcmerror = -EFAULT;
+ int bcmerror;
u32 rstvec;
sdio_claim_host(bus->sdiodev->func[1]);

View File

@ -1,27 +0,0 @@
From: Hante Meuleman <hante.meuleman@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:21 +0200
Subject: [PATCH] brcmfmac: clear eventmask array before using it
When the event_msgs iovar is set an array is used to configure the
enabled events. This arrays needs to nulled before configuring
otherwise unhandled events will be enabled. This solves a problem
where in case of wowl the host got woken by an incorrectly enabled
event.
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
@@ -371,6 +371,7 @@ int brcmf_fweh_activate_events(struct br
int i, err;
s8 eventmask[BRCMF_EVENTING_MASK_LEN];
+ memset(eventmask, 0, sizeof(eventmask));
for (i = 0; i < BRCMF_E_LAST; i++) {
if (ifp->drvr->fweh.evt_handler[i]) {
brcmf_dbg(EVENT, "enable event %s\n",

View File

@ -1,27 +0,0 @@
From: Hante Meuleman <hante.meuleman@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:22 +0200
Subject: [PATCH] brcmfmac: fix clearing wowl wake indicators
Newer firmwares require the usage of the wowl wakeind struct as size
for the iovar to clear the wake indicators. Older firmwares do not
care, so change the used size.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3608,7 +3608,8 @@ static void brcmf_configure_wowl(struct
if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state))
wowl_config |= BRCMF_WOWL_UNASSOC;
- brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", "clear", strlen("clear"));
+ brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", "clear",
+ sizeof(struct brcmf_wowl_wakeind_le));
brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config);
brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1);
brcmf_bus_wowl_config(cfg->pub->bus_if, true);

View File

@ -1,114 +0,0 @@
From: Hante Meuleman <hante.meuleman@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:23 +0200
Subject: [PATCH] brcmfmac: insert default boardrev in nvram data if
missing
Some nvram files/stores come without the boardrev information,
but firmware requires this to be set. When not found in nvram then
add a default boardrev string to the nvram data.
Reported-by: Rafal Milecki <zajec5@gmail.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -29,6 +29,7 @@
#define BRCMF_FW_MAX_NVRAM_SIZE 64000
#define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */
#define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */
+#define BRCMF_FW_DEFAULT_BOARDREV "boardrev=0xff"
enum nvram_parser_state {
IDLE,
@@ -51,6 +52,7 @@ enum nvram_parser_state {
* @entry: start position of key,value entry.
* @multi_dev_v1: detect pcie multi device v1 (compressed).
* @multi_dev_v2: detect pcie multi device v2.
+ * @boardrev_found: nvram contains boardrev information.
*/
struct nvram_parser {
enum nvram_parser_state state;
@@ -63,6 +65,7 @@ struct nvram_parser {
u32 entry;
bool multi_dev_v1;
bool multi_dev_v2;
+ bool boardrev_found;
};
/**
@@ -125,6 +128,8 @@ static enum nvram_parser_state brcmf_nvr
nvp->multi_dev_v1 = true;
if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0)
nvp->multi_dev_v2 = true;
+ if (strncmp(&nvp->data[nvp->entry], "boardrev", 8) == 0)
+ nvp->boardrev_found = true;
} else if (!is_nvram_char(c) || c == ' ') {
brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
nvp->line, nvp->column);
@@ -284,6 +289,8 @@ static void brcmf_fw_strip_multi_v1(stru
while (i < nvp->nvram_len) {
if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) {
i += 2;
+ if (strncmp(&nvp->nvram[i], "boardrev", 8) == 0)
+ nvp->boardrev_found = true;
while (nvp->nvram[i] != 0) {
nvram[j] = nvp->nvram[i];
i++;
@@ -335,6 +342,8 @@ static void brcmf_fw_strip_multi_v2(stru
while (i < nvp->nvram_len - len) {
if (strncmp(&nvp->nvram[i], prefix, len) == 0) {
i += len;
+ if (strncmp(&nvp->nvram[i], "boardrev", 8) == 0)
+ nvp->boardrev_found = true;
while (nvp->nvram[i] != 0) {
nvram[j] = nvp->nvram[i];
i++;
@@ -356,6 +365,18 @@ fail:
nvp->nvram_len = 0;
}
+static void brcmf_fw_add_defaults(struct nvram_parser *nvp)
+{
+ if (nvp->boardrev_found)
+ return;
+
+ memcpy(&nvp->nvram[nvp->nvram_len], &BRCMF_FW_DEFAULT_BOARDREV,
+ strlen(BRCMF_FW_DEFAULT_BOARDREV));
+ nvp->nvram_len += strlen(BRCMF_FW_DEFAULT_BOARDREV);
+ nvp->nvram[nvp->nvram_len] = '\0';
+ nvp->nvram_len++;
+}
+
/* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil
* and ending in a NUL. Removes carriage returns, empty lines, comment lines,
* and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
@@ -377,16 +398,21 @@ static void *brcmf_fw_nvram_strip(const
if (nvp.state == END)
break;
}
- if (nvp.multi_dev_v1)
+ if (nvp.multi_dev_v1) {
+ nvp.boardrev_found = false;
brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr);
- else if (nvp.multi_dev_v2)
+ } else if (nvp.multi_dev_v2) {
+ nvp.boardrev_found = false;
brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr);
+ }
if (nvp.nvram_len == 0) {
kfree(nvp.nvram);
return NULL;
}
+ brcmf_fw_add_defaults(&nvp);
+
pad = nvp.nvram_len;
*new_length = roundup(nvp.nvram_len + 1, 4);
while (pad != *new_length) {

View File

@ -1,29 +0,0 @@
From: Hante Meuleman <hante.meuleman@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:24 +0200
Subject: [PATCH] brcmfmac: fix p2p scan abort null pointer exception
When p2p connection setup is performed without having ever done an
escan a null pointer exception can occur. This is because the ifp
to abort scanning is taken from escan struct while it was never
initialized. Fix this by using the primary ifp for scan abort. The
abort should still be performed and all scan related commands are
performed on primary ifp.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1266,7 +1266,7 @@ static void
brcmf_p2p_stop_wait_next_action_frame(struct brcmf_cfg80211_info *cfg)
{
struct brcmf_p2p_info *p2p = &cfg->p2p;
- struct brcmf_if *ifp = cfg->escan_info.ifp;
+ struct brcmf_if *ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
if (test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status) &&
(test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status) ||

View File

@ -1,297 +0,0 @@
From: Franky Lin <franky.lin@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:25 +0200
Subject: [PATCH] brcmfmac: screening firmware event packet
Firmware uses asynchronized events as a communication method to the
host. The event packets are marked as ETH_P_LINK_CTL protocol type. For
SDIO and PCIe bus, this kind of packets are delivered through virtual
event channel not data channel. This patch adds a screening logic to
make sure the event handler only processes the events coming from the
correct channel.
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Signed-off-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -216,7 +216,9 @@ bool brcmf_c_prec_enq(struct device *dev
int prec);
/* Receive frame for delivery to OS. Callee disposes of rxp. */
-void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
+void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp, bool handle_evnt);
+/* Receive async event packet from firmware. Callee disposes of rxp. */
+void brcmf_rx_event(struct device *dev, struct sk_buff *rxp);
/* Indication from bus module regarding presence/insertion of dongle. */
int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -311,16 +311,17 @@ void brcmf_txflowblock(struct device *de
brcmf_fws_bus_blocked(drvr, state);
}
-void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb,
+ bool handle_event)
{
- skb->dev = ifp->ndev;
- skb->protocol = eth_type_trans(skb, skb->dev);
+ skb->protocol = eth_type_trans(skb, ifp->ndev);
if (skb->pkt_type == PACKET_MULTICAST)
ifp->stats.multicast++;
/* Process special event packets */
- brcmf_fweh_process_skb(ifp->drvr, skb);
+ if (handle_event)
+ brcmf_fweh_process_skb(ifp->drvr, skb);
if (!(ifp->ndev->flags & IFF_UP)) {
brcmu_pkt_buf_free_skb(skb);
@@ -381,7 +382,7 @@ static void brcmf_rxreorder_process_info
/* validate flags and flow id */
if (flags == 0xFF) {
brcmf_err("invalid flags...so ignore this packet\n");
- brcmf_netif_rx(ifp, pkt);
+ brcmf_netif_rx(ifp, pkt, false);
return;
}
@@ -393,7 +394,7 @@ static void brcmf_rxreorder_process_info
if (rfi == NULL) {
brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n",
flow_id);
- brcmf_netif_rx(ifp, pkt);
+ brcmf_netif_rx(ifp, pkt, false);
return;
}
@@ -418,7 +419,7 @@ static void brcmf_rxreorder_process_info
rfi = kzalloc(buf_size, GFP_ATOMIC);
if (rfi == NULL) {
brcmf_err("failed to alloc buffer\n");
- brcmf_netif_rx(ifp, pkt);
+ brcmf_netif_rx(ifp, pkt, false);
return;
}
@@ -532,11 +533,11 @@ static void brcmf_rxreorder_process_info
netif_rx:
skb_queue_walk_safe(&reorder_list, pkt, pnext) {
__skb_unlink(pkt, &reorder_list);
- brcmf_netif_rx(ifp, pkt);
+ brcmf_netif_rx(ifp, pkt, false);
}
}
-void brcmf_rx_frame(struct device *dev, struct sk_buff *skb)
+void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_evnt)
{
struct brcmf_if *ifp;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
@@ -560,7 +561,32 @@ void brcmf_rx_frame(struct device *dev,
if (rd->reorder)
brcmf_rxreorder_process_info(ifp, rd->reorder, skb);
else
- brcmf_netif_rx(ifp, skb);
+ brcmf_netif_rx(ifp, skb, handle_evnt);
+}
+
+void brcmf_rx_event(struct device *dev, struct sk_buff *skb)
+{
+ struct brcmf_if *ifp;
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_pub *drvr = bus_if->drvr;
+ int ret;
+
+ brcmf_dbg(EVENT, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
+
+ /* process and remove protocol-specific header */
+ ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp);
+
+ if (ret || !ifp || !ifp->ndev) {
+ if (ret != -ENODATA && ifp)
+ ifp->stats.rx_errors++;
+ brcmu_pkt_buf_free_skb(skb);
+ return;
+ }
+
+ skb->protocol = eth_type_trans(skb, ifp->ndev);
+
+ brcmf_fweh_process_skb(ifp->drvr, skb);
+ brcmu_pkt_buf_free_skb(skb);
}
void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -225,7 +225,8 @@ int brcmf_get_next_free_bsscfgidx(struct
void brcmf_txflowblock_if(struct brcmf_if *ifp,
enum brcmf_netif_stop_reason reason, bool state);
void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
-void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb,
+ bool handle_event);
void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
int __init brcmf_core_init(void);
void __exit brcmf_core_exit(void);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
@@ -1075,28 +1076,13 @@ static void brcmf_msgbuf_rxbuf_event_pos
}
-static void
-brcmf_msgbuf_rx_skb(struct brcmf_msgbuf *msgbuf, struct sk_buff *skb,
- u8 ifidx)
-{
- struct brcmf_if *ifp;
-
- ifp = brcmf_get_ifp(msgbuf->drvr, ifidx);
- if (!ifp || !ifp->ndev) {
- brcmf_err("Received pkt for invalid ifidx %d\n", ifidx);
- brcmu_pkt_buf_free_skb(skb);
- return;
- }
- brcmf_netif_rx(ifp, skb);
-}
-
-
static void brcmf_msgbuf_process_event(struct brcmf_msgbuf *msgbuf, void *buf)
{
struct msgbuf_rx_event *event;
u32 idx;
u16 buflen;
struct sk_buff *skb;
+ struct brcmf_if *ifp;
event = (struct msgbuf_rx_event *)buf;
idx = le32_to_cpu(event->msg.request_id);
@@ -1116,7 +1102,19 @@ static void brcmf_msgbuf_process_event(s
skb_trim(skb, buflen);
- brcmf_msgbuf_rx_skb(msgbuf, skb, event->msg.ifidx);
+ ifp = brcmf_get_ifp(msgbuf->drvr, event->msg.ifidx);
+ if (!ifp || !ifp->ndev) {
+ brcmf_err("Received pkt for invalid ifidx %d\n",
+ event->msg.ifidx);
+ goto exit;
+ }
+
+ skb->protocol = eth_type_trans(skb, ifp->ndev);
+
+ brcmf_fweh_process_skb(ifp->drvr, skb);
+
+exit:
+ brcmu_pkt_buf_free_skb(skb);
}
@@ -1128,6 +1126,7 @@ brcmf_msgbuf_process_rx_complete(struct
u16 data_offset;
u16 buflen;
u32 idx;
+ struct brcmf_if *ifp;
brcmf_msgbuf_update_rxbufpost_count(msgbuf, 1);
@@ -1148,7 +1147,14 @@ brcmf_msgbuf_process_rx_complete(struct
skb_trim(skb, buflen);
- brcmf_msgbuf_rx_skb(msgbuf, skb, rx_complete->msg.ifidx);
+ ifp = brcmf_get_ifp(msgbuf->drvr, rx_complete->msg.ifidx);
+ if (!ifp || !ifp->ndev) {
+ brcmf_err("Received pkt for invalid ifidx %d\n",
+ rx_complete->msg.ifidx);
+ brcmu_pkt_buf_free_skb(skb);
+ return;
+ }
+ brcmf_netif_rx(ifp, skb, false);
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -1294,6 +1294,17 @@ static inline u8 brcmf_sdio_getdatoffset
return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT);
}
+static inline bool brcmf_sdio_fromevntchan(u8 *swheader)
+{
+ u32 hdrvalue;
+ u8 ret;
+
+ hdrvalue = *(u32 *)swheader;
+ ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT);
+
+ return (ret == SDPCM_EVENT_CHANNEL);
+}
+
static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
struct brcmf_sdio_hdrinfo *rd,
enum brcmf_sdio_frmtype type)
@@ -1641,7 +1652,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf
pfirst->len, pfirst->next,
pfirst->prev);
skb_unlink(pfirst, &bus->glom);
- brcmf_rx_frame(bus->sdiodev->dev, pfirst);
+ if (brcmf_sdio_fromevntchan(pfirst->data))
+ brcmf_rx_event(bus->sdiodev->dev, pfirst);
+ else
+ brcmf_rx_frame(bus->sdiodev->dev, pfirst,
+ false);
bus->sdcnt.rxglompkts++;
}
@@ -1967,18 +1982,19 @@ static uint brcmf_sdio_readframes(struct
__skb_trim(pkt, rd->len);
skb_pull(pkt, rd->dat_offset);
+ if (pkt->len == 0)
+ brcmu_pkt_buf_free_skb(pkt);
+ else if (rd->channel == SDPCM_EVENT_CHANNEL)
+ brcmf_rx_event(bus->sdiodev->dev, pkt);
+ else
+ brcmf_rx_frame(bus->sdiodev->dev, pkt,
+ false);
+
/* prepare the descriptor for the next read */
rd->len = rd->len_nxtfrm << 4;
rd->len_nxtfrm = 0;
/* treat all packet as event if we don't know */
rd->channel = SDPCM_EVENT_CHANNEL;
-
- if (pkt->len == 0) {
- brcmu_pkt_buf_free_skb(pkt);
- continue;
- }
-
- brcmf_rx_frame(bus->sdiodev->dev, pkt);
}
rxcount = maxframes - rxleft;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -514,7 +514,7 @@ static void brcmf_usb_rx_complete(struct
if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
skb_put(skb, urb->actual_length);
- brcmf_rx_frame(devinfo->dev, skb);
+ brcmf_rx_frame(devinfo->dev, skb, true);
brcmf_usb_rx_refill(devinfo, req);
} else {
brcmu_pkt_buf_free_skb(skb);

View File

@ -1,585 +0,0 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:26 +0200
Subject: [PATCH] brcmfmac: cleanup ampdu-rx host reorder code
The code for ampdu-rx host reorder is related to the firmware signalling
supported in BCDC protocol. This change moves the code to fwsignal module.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
@@ -351,6 +351,12 @@ brcmf_proto_bcdc_add_tdls_peer(struct br
{
}
+static void brcmf_proto_bcdc_rxreorder(struct brcmf_if *ifp,
+ struct sk_buff *skb)
+{
+ brcmf_fws_rxreorder(ifp, skb);
+}
+
int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
{
struct brcmf_bcdc *bcdc;
@@ -372,6 +378,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
drvr->proto->configure_addr_mode = brcmf_proto_bcdc_configure_addr_mode;
drvr->proto->delete_peer = brcmf_proto_bcdc_delete_peer;
drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer;
+ drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder;
drvr->proto->pd = bcdc;
drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -40,19 +40,6 @@
#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950)
-/* AMPDU rx reordering definitions */
-#define BRCMF_RXREORDER_FLOWID_OFFSET 0
-#define BRCMF_RXREORDER_MAXIDX_OFFSET 2
-#define BRCMF_RXREORDER_FLAGS_OFFSET 4
-#define BRCMF_RXREORDER_CURIDX_OFFSET 6
-#define BRCMF_RXREORDER_EXPIDX_OFFSET 8
-
-#define BRCMF_RXREORDER_DEL_FLOW 0x01
-#define BRCMF_RXREORDER_FLUSH_ALL 0x02
-#define BRCMF_RXREORDER_CURIDX_VALID 0x04
-#define BRCMF_RXREORDER_EXPIDX_VALID 0x08
-#define BRCMF_RXREORDER_NEW_HOLE 0x10
-
#define BRCMF_BSSIDX_INVALID -1
char *brcmf_ifname(struct brcmf_if *ifp)
@@ -342,207 +329,11 @@ void brcmf_netif_rx(struct brcmf_if *ifp
netif_rx_ni(skb);
}
-static void brcmf_rxreorder_get_skb_list(struct brcmf_ampdu_rx_reorder *rfi,
- u8 start, u8 end,
- struct sk_buff_head *skb_list)
-{
- /* initialize return list */
- __skb_queue_head_init(skb_list);
-
- if (rfi->pend_pkts == 0) {
- brcmf_dbg(INFO, "no packets in reorder queue\n");
- return;
- }
-
- do {
- if (rfi->pktslots[start]) {
- __skb_queue_tail(skb_list, rfi->pktslots[start]);
- rfi->pktslots[start] = NULL;
- }
- start++;
- if (start > rfi->max_idx)
- start = 0;
- } while (start != end);
- rfi->pend_pkts -= skb_queue_len(skb_list);
-}
-
-static void brcmf_rxreorder_process_info(struct brcmf_if *ifp, u8 *reorder_data,
- struct sk_buff *pkt)
-{
- u8 flow_id, max_idx, cur_idx, exp_idx, end_idx;
- struct brcmf_ampdu_rx_reorder *rfi;
- struct sk_buff_head reorder_list;
- struct sk_buff *pnext;
- u8 flags;
- u32 buf_size;
-
- flow_id = reorder_data[BRCMF_RXREORDER_FLOWID_OFFSET];
- flags = reorder_data[BRCMF_RXREORDER_FLAGS_OFFSET];
-
- /* validate flags and flow id */
- if (flags == 0xFF) {
- brcmf_err("invalid flags...so ignore this packet\n");
- brcmf_netif_rx(ifp, pkt, false);
- return;
- }
-
- rfi = ifp->drvr->reorder_flows[flow_id];
- if (flags & BRCMF_RXREORDER_DEL_FLOW) {
- brcmf_dbg(INFO, "flow-%d: delete\n",
- flow_id);
-
- if (rfi == NULL) {
- brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n",
- flow_id);
- brcmf_netif_rx(ifp, pkt, false);
- return;
- }
-
- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, rfi->exp_idx,
- &reorder_list);
- /* add the last packet */
- __skb_queue_tail(&reorder_list, pkt);
- kfree(rfi);
- ifp->drvr->reorder_flows[flow_id] = NULL;
- goto netif_rx;
- }
- /* from here on we need a flow reorder instance */
- if (rfi == NULL) {
- buf_size = sizeof(*rfi);
- max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET];
-
- buf_size += (max_idx + 1) * sizeof(pkt);
-
- /* allocate space for flow reorder info */
- brcmf_dbg(INFO, "flow-%d: start, maxidx %d\n",
- flow_id, max_idx);
- rfi = kzalloc(buf_size, GFP_ATOMIC);
- if (rfi == NULL) {
- brcmf_err("failed to alloc buffer\n");
- brcmf_netif_rx(ifp, pkt, false);
- return;
- }
-
- ifp->drvr->reorder_flows[flow_id] = rfi;
- rfi->pktslots = (struct sk_buff **)(rfi+1);
- rfi->max_idx = max_idx;
- }
- if (flags & BRCMF_RXREORDER_NEW_HOLE) {
- if (rfi->pend_pkts) {
- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx,
- rfi->exp_idx,
- &reorder_list);
- WARN_ON(rfi->pend_pkts);
- } else {
- __skb_queue_head_init(&reorder_list);
- }
- rfi->cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET];
- rfi->exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET];
- rfi->max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET];
- rfi->pktslots[rfi->cur_idx] = pkt;
- rfi->pend_pkts++;
- brcmf_dbg(DATA, "flow-%d: new hole %d (%d), pending %d\n",
- flow_id, rfi->cur_idx, rfi->exp_idx, rfi->pend_pkts);
- } else if (flags & BRCMF_RXREORDER_CURIDX_VALID) {
- cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET];
- exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET];
-
- if ((exp_idx == rfi->exp_idx) && (cur_idx != rfi->exp_idx)) {
- /* still in the current hole */
- /* enqueue the current on the buffer chain */
- if (rfi->pktslots[cur_idx] != NULL) {
- brcmf_dbg(INFO, "HOLE: ERROR buffer pending..free it\n");
- brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]);
- rfi->pktslots[cur_idx] = NULL;
- }
- rfi->pktslots[cur_idx] = pkt;
- rfi->pend_pkts++;
- rfi->cur_idx = cur_idx;
- brcmf_dbg(DATA, "flow-%d: store pkt %d (%d), pending %d\n",
- flow_id, cur_idx, exp_idx, rfi->pend_pkts);
-
- /* can return now as there is no reorder
- * list to process.
- */
- return;
- }
- if (rfi->exp_idx == cur_idx) {
- if (rfi->pktslots[cur_idx] != NULL) {
- brcmf_dbg(INFO, "error buffer pending..free it\n");
- brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]);
- rfi->pktslots[cur_idx] = NULL;
- }
- rfi->pktslots[cur_idx] = pkt;
- rfi->pend_pkts++;
-
- /* got the expected one. flush from current to expected
- * and update expected
- */
- brcmf_dbg(DATA, "flow-%d: expected %d (%d), pending %d\n",
- flow_id, cur_idx, exp_idx, rfi->pend_pkts);
-
- rfi->cur_idx = cur_idx;
- rfi->exp_idx = exp_idx;
-
- brcmf_rxreorder_get_skb_list(rfi, cur_idx, exp_idx,
- &reorder_list);
- brcmf_dbg(DATA, "flow-%d: freeing buffers %d, pending %d\n",
- flow_id, skb_queue_len(&reorder_list),
- rfi->pend_pkts);
- } else {
- u8 end_idx;
-
- brcmf_dbg(DATA, "flow-%d (0x%x): both moved, old %d/%d, new %d/%d\n",
- flow_id, flags, rfi->cur_idx, rfi->exp_idx,
- cur_idx, exp_idx);
- if (flags & BRCMF_RXREORDER_FLUSH_ALL)
- end_idx = rfi->exp_idx;
- else
- end_idx = exp_idx;
-
- /* flush pkts first */
- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx,
- &reorder_list);
-
- if (exp_idx == ((cur_idx + 1) % (rfi->max_idx + 1))) {
- __skb_queue_tail(&reorder_list, pkt);
- } else {
- rfi->pktslots[cur_idx] = pkt;
- rfi->pend_pkts++;
- }
- rfi->exp_idx = exp_idx;
- rfi->cur_idx = cur_idx;
- }
- } else {
- /* explicity window move updating the expected index */
- exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET];
-
- brcmf_dbg(DATA, "flow-%d (0x%x): change expected: %d -> %d\n",
- flow_id, flags, rfi->exp_idx, exp_idx);
- if (flags & BRCMF_RXREORDER_FLUSH_ALL)
- end_idx = rfi->exp_idx;
- else
- end_idx = exp_idx;
-
- brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx,
- &reorder_list);
- __skb_queue_tail(&reorder_list, pkt);
- /* set the new expected idx */
- rfi->exp_idx = exp_idx;
- }
-netif_rx:
- skb_queue_walk_safe(&reorder_list, pkt, pnext) {
- __skb_unlink(pkt, &reorder_list);
- brcmf_netif_rx(ifp, pkt, false);
- }
-}
-
void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_evnt)
{
struct brcmf_if *ifp;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_pub *drvr = bus_if->drvr;
- struct brcmf_skb_reorder_data *rd;
int ret;
brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
@@ -557,9 +348,8 @@ void brcmf_rx_frame(struct device *dev,
return;
}
- rd = (struct brcmf_skb_reorder_data *)skb->cb;
- if (rd->reorder)
- brcmf_rxreorder_process_info(ifp, rd->reorder, skb);
+ if (brcmf_proto_is_reorder_skb(skb))
+ brcmf_proto_rxreorder(ifp, skb);
else
brcmf_netif_rx(ifp, skb, handle_evnt);
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -208,10 +208,6 @@ struct brcmf_if {
u8 ipv6addr_idx;
};
-struct brcmf_skb_reorder_data {
- u8 *reorder;
-};
-
int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
/* Return pointer to interface name */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
@@ -92,6 +92,19 @@ enum brcmf_fws_tlv_len {
};
#undef BRCMF_FWS_TLV_DEF
+/* AMPDU rx reordering definitions */
+#define BRCMF_RXREORDER_FLOWID_OFFSET 0
+#define BRCMF_RXREORDER_MAXIDX_OFFSET 2
+#define BRCMF_RXREORDER_FLAGS_OFFSET 4
+#define BRCMF_RXREORDER_CURIDX_OFFSET 6
+#define BRCMF_RXREORDER_EXPIDX_OFFSET 8
+
+#define BRCMF_RXREORDER_DEL_FLOW 0x01
+#define BRCMF_RXREORDER_FLUSH_ALL 0x02
+#define BRCMF_RXREORDER_CURIDX_VALID 0x04
+#define BRCMF_RXREORDER_EXPIDX_VALID 0x08
+#define BRCMF_RXREORDER_NEW_HOLE 0x10
+
#ifdef DEBUG
/*
* brcmf_fws_tlv_names - array of tlv names.
@@ -1614,6 +1627,202 @@ static int brcmf_fws_notify_bcmc_credit_
return 0;
}
+static void brcmf_rxreorder_get_skb_list(struct brcmf_ampdu_rx_reorder *rfi,
+ u8 start, u8 end,
+ struct sk_buff_head *skb_list)
+{
+ /* initialize return list */
+ __skb_queue_head_init(skb_list);
+
+ if (rfi->pend_pkts == 0) {
+ brcmf_dbg(INFO, "no packets in reorder queue\n");
+ return;
+ }
+
+ do {
+ if (rfi->pktslots[start]) {
+ __skb_queue_tail(skb_list, rfi->pktslots[start]);
+ rfi->pktslots[start] = NULL;
+ }
+ start++;
+ if (start > rfi->max_idx)
+ start = 0;
+ } while (start != end);
+ rfi->pend_pkts -= skb_queue_len(skb_list);
+}
+
+void brcmf_fws_rxreorder(struct brcmf_if *ifp, struct sk_buff *pkt)
+{
+ u8 *reorder_data;
+ u8 flow_id, max_idx, cur_idx, exp_idx, end_idx;
+ struct brcmf_ampdu_rx_reorder *rfi;
+ struct sk_buff_head reorder_list;
+ struct sk_buff *pnext;
+ u8 flags;
+ u32 buf_size;
+
+ reorder_data = ((struct brcmf_skb_reorder_data *)pkt->cb)->reorder;
+ flow_id = reorder_data[BRCMF_RXREORDER_FLOWID_OFFSET];
+ flags = reorder_data[BRCMF_RXREORDER_FLAGS_OFFSET];
+
+ /* validate flags and flow id */
+ if (flags == 0xFF) {
+ brcmf_err("invalid flags...so ignore this packet\n");
+ brcmf_netif_rx(ifp, pkt, false);
+ return;
+ }
+
+ rfi = ifp->drvr->reorder_flows[flow_id];
+ if (flags & BRCMF_RXREORDER_DEL_FLOW) {
+ brcmf_dbg(INFO, "flow-%d: delete\n",
+ flow_id);
+
+ if (rfi == NULL) {
+ brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n",
+ flow_id);
+ brcmf_netif_rx(ifp, pkt, false);
+ return;
+ }
+
+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, rfi->exp_idx,
+ &reorder_list);
+ /* add the last packet */
+ __skb_queue_tail(&reorder_list, pkt);
+ kfree(rfi);
+ ifp->drvr->reorder_flows[flow_id] = NULL;
+ goto netif_rx;
+ }
+ /* from here on we need a flow reorder instance */
+ if (rfi == NULL) {
+ buf_size = sizeof(*rfi);
+ max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET];
+
+ buf_size += (max_idx + 1) * sizeof(pkt);
+
+ /* allocate space for flow reorder info */
+ brcmf_dbg(INFO, "flow-%d: start, maxidx %d\n",
+ flow_id, max_idx);
+ rfi = kzalloc(buf_size, GFP_ATOMIC);
+ if (rfi == NULL) {
+ brcmf_err("failed to alloc buffer\n");
+ brcmf_netif_rx(ifp, pkt, false);
+ return;
+ }
+
+ ifp->drvr->reorder_flows[flow_id] = rfi;
+ rfi->pktslots = (struct sk_buff **)(rfi + 1);
+ rfi->max_idx = max_idx;
+ }
+ if (flags & BRCMF_RXREORDER_NEW_HOLE) {
+ if (rfi->pend_pkts) {
+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx,
+ rfi->exp_idx,
+ &reorder_list);
+ WARN_ON(rfi->pend_pkts);
+ } else {
+ __skb_queue_head_init(&reorder_list);
+ }
+ rfi->cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET];
+ rfi->exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET];
+ rfi->max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET];
+ rfi->pktslots[rfi->cur_idx] = pkt;
+ rfi->pend_pkts++;
+ brcmf_dbg(DATA, "flow-%d: new hole %d (%d), pending %d\n",
+ flow_id, rfi->cur_idx, rfi->exp_idx, rfi->pend_pkts);
+ } else if (flags & BRCMF_RXREORDER_CURIDX_VALID) {
+ cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET];
+ exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET];
+
+ if ((exp_idx == rfi->exp_idx) && (cur_idx != rfi->exp_idx)) {
+ /* still in the current hole */
+ /* enqueue the current on the buffer chain */
+ if (rfi->pktslots[cur_idx] != NULL) {
+ brcmf_dbg(INFO, "HOLE: ERROR buffer pending..free it\n");
+ brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]);
+ rfi->pktslots[cur_idx] = NULL;
+ }
+ rfi->pktslots[cur_idx] = pkt;
+ rfi->pend_pkts++;
+ rfi->cur_idx = cur_idx;
+ brcmf_dbg(DATA, "flow-%d: store pkt %d (%d), pending %d\n",
+ flow_id, cur_idx, exp_idx, rfi->pend_pkts);
+
+ /* can return now as there is no reorder
+ * list to process.
+ */
+ return;
+ }
+ if (rfi->exp_idx == cur_idx) {
+ if (rfi->pktslots[cur_idx] != NULL) {
+ brcmf_dbg(INFO, "error buffer pending..free it\n");
+ brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]);
+ rfi->pktslots[cur_idx] = NULL;
+ }
+ rfi->pktslots[cur_idx] = pkt;
+ rfi->pend_pkts++;
+
+ /* got the expected one. flush from current to expected
+ * and update expected
+ */
+ brcmf_dbg(DATA, "flow-%d: expected %d (%d), pending %d\n",
+ flow_id, cur_idx, exp_idx, rfi->pend_pkts);
+
+ rfi->cur_idx = cur_idx;
+ rfi->exp_idx = exp_idx;
+
+ brcmf_rxreorder_get_skb_list(rfi, cur_idx, exp_idx,
+ &reorder_list);
+ brcmf_dbg(DATA, "flow-%d: freeing buffers %d, pending %d\n",
+ flow_id, skb_queue_len(&reorder_list),
+ rfi->pend_pkts);
+ } else {
+ u8 end_idx;
+
+ brcmf_dbg(DATA, "flow-%d (0x%x): both moved, old %d/%d, new %d/%d\n",
+ flow_id, flags, rfi->cur_idx, rfi->exp_idx,
+ cur_idx, exp_idx);
+ if (flags & BRCMF_RXREORDER_FLUSH_ALL)
+ end_idx = rfi->exp_idx;
+ else
+ end_idx = exp_idx;
+
+ /* flush pkts first */
+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx,
+ &reorder_list);
+
+ if (exp_idx == ((cur_idx + 1) % (rfi->max_idx + 1))) {
+ __skb_queue_tail(&reorder_list, pkt);
+ } else {
+ rfi->pktslots[cur_idx] = pkt;
+ rfi->pend_pkts++;
+ }
+ rfi->exp_idx = exp_idx;
+ rfi->cur_idx = cur_idx;
+ }
+ } else {
+ /* explicity window move updating the expected index */
+ exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET];
+
+ brcmf_dbg(DATA, "flow-%d (0x%x): change expected: %d -> %d\n",
+ flow_id, flags, rfi->exp_idx, exp_idx);
+ if (flags & BRCMF_RXREORDER_FLUSH_ALL)
+ end_idx = rfi->exp_idx;
+ else
+ end_idx = exp_idx;
+
+ brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx,
+ &reorder_list);
+ __skb_queue_tail(&reorder_list, pkt);
+ /* set the new expected idx */
+ rfi->exp_idx = exp_idx;
+ }
+netif_rx:
+ skb_queue_walk_safe(&reorder_list, pkt, pnext) {
+ __skb_unlink(pkt, &reorder_list);
+ brcmf_netif_rx(ifp, pkt, false);
+ }
+}
+
void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb)
{
struct brcmf_skb_reorder_data *rd;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
@@ -29,5 +29,6 @@ void brcmf_fws_add_interface(struct brcm
void brcmf_fws_del_interface(struct brcmf_if *ifp);
void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb);
void brcmf_fws_bus_blocked(struct brcmf_pub *drvr, bool flow_blocked);
+void brcmf_fws_rxreorder(struct brcmf_if *ifp, struct sk_buff *skb);
#endif /* FWSIGNAL_H_ */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -527,6 +527,9 @@ static int brcmf_msgbuf_hdrpull(struct b
return -ENODEV;
}
+static void brcmf_msgbuf_rxreorder(struct brcmf_if *ifp, struct sk_buff *skb)
+{
+}
static void
brcmf_msgbuf_remove_flowring(struct brcmf_msgbuf *msgbuf, u16 flowid)
@@ -1466,6 +1469,7 @@ int brcmf_proto_msgbuf_attach(struct brc
drvr->proto->configure_addr_mode = brcmf_msgbuf_configure_addr_mode;
drvr->proto->delete_peer = brcmf_msgbuf_delete_peer;
drvr->proto->add_tdls_peer = brcmf_msgbuf_add_tdls_peer;
+ drvr->proto->rxreorder = brcmf_msgbuf_rxreorder;
drvr->proto->pd = msgbuf;
init_waitqueue_head(&msgbuf->ioctl_resp_wait);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
@@ -22,6 +22,9 @@ enum proto_addr_mode {
ADDR_DIRECT
};
+struct brcmf_skb_reorder_data {
+ u8 *reorder;
+};
struct brcmf_proto {
int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws,
@@ -38,6 +41,7 @@ struct brcmf_proto {
u8 peer[ETH_ALEN]);
void (*add_tdls_peer)(struct brcmf_pub *drvr, int ifidx,
u8 peer[ETH_ALEN]);
+ void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb);
void *pd;
};
@@ -91,6 +95,18 @@ brcmf_proto_add_tdls_peer(struct brcmf_p
{
drvr->proto->add_tdls_peer(drvr, ifidx, peer);
}
+static inline bool brcmf_proto_is_reorder_skb(struct sk_buff *skb)
+{
+ struct brcmf_skb_reorder_data *rd;
+
+ rd = (struct brcmf_skb_reorder_data *)skb->cb;
+ return !!rd->reorder;
+}
+static inline void
+brcmf_proto_rxreorder(struct brcmf_if *ifp, struct sk_buff *skb)
+{
+ ifp->drvr->proto->rxreorder(ifp, skb);
+}
#endif /* BRCMFMAC_PROTO_H */

View File

@ -1,139 +0,0 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:27 +0200
Subject: [PATCH] brcmfmac: revise handling events in receive path
Move event handling out of brcmf_netif_rx() avoiding the need
to pass a flag. This flag is only ever true for USB hosts as
other interface use separate brcmf_rx_event() function.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -216,7 +216,7 @@ bool brcmf_c_prec_enq(struct device *dev
int prec);
/* Receive frame for delivery to OS. Callee disposes of rxp. */
-void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp, bool handle_evnt);
+void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp, bool handle_event);
/* Receive async event packet from firmware. Callee disposes of rxp. */
void brcmf_rx_event(struct device *dev, struct sk_buff *rxp);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -298,18 +298,11 @@ void brcmf_txflowblock(struct device *de
brcmf_fws_bus_blocked(drvr, state);
}
-void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb,
- bool handle_event)
+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
{
- skb->protocol = eth_type_trans(skb, ifp->ndev);
-
if (skb->pkt_type == PACKET_MULTICAST)
ifp->stats.multicast++;
- /* Process special event packets */
- if (handle_event)
- brcmf_fweh_process_skb(ifp->drvr, skb);
-
if (!(ifp->ndev->flags & IFF_UP)) {
brcmu_pkt_buf_free_skb(skb);
return;
@@ -329,7 +322,7 @@ void brcmf_netif_rx(struct brcmf_if *ifp
netif_rx_ni(skb);
}
-void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_evnt)
+void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event)
{
struct brcmf_if *ifp;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
@@ -348,10 +341,17 @@ void brcmf_rx_frame(struct device *dev,
return;
}
- if (brcmf_proto_is_reorder_skb(skb))
+ skb->protocol = eth_type_trans(skb, ifp->ndev);
+
+ if (brcmf_proto_is_reorder_skb(skb)) {
brcmf_proto_rxreorder(ifp, skb);
- else
- brcmf_netif_rx(ifp, skb, handle_evnt);
+ } else {
+ /* Process special event packets */
+ if (handle_event)
+ brcmf_fweh_process_skb(ifp->drvr, skb);
+
+ brcmf_netif_rx(ifp, skb);
+ }
}
void brcmf_rx_event(struct device *dev, struct sk_buff *skb)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -221,8 +221,7 @@ int brcmf_get_next_free_bsscfgidx(struct
void brcmf_txflowblock_if(struct brcmf_if *ifp,
enum brcmf_netif_stop_reason reason, bool state);
void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
-void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb,
- bool handle_event);
+void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
int __init brcmf_core_init(void);
void __exit brcmf_core_exit(void);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
@@ -1668,7 +1668,7 @@ void brcmf_fws_rxreorder(struct brcmf_if
/* validate flags and flow id */
if (flags == 0xFF) {
brcmf_err("invalid flags...so ignore this packet\n");
- brcmf_netif_rx(ifp, pkt, false);
+ brcmf_netif_rx(ifp, pkt);
return;
}
@@ -1680,7 +1680,7 @@ void brcmf_fws_rxreorder(struct brcmf_if
if (rfi == NULL) {
brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n",
flow_id);
- brcmf_netif_rx(ifp, pkt, false);
+ brcmf_netif_rx(ifp, pkt);
return;
}
@@ -1705,7 +1705,7 @@ void brcmf_fws_rxreorder(struct brcmf_if
rfi = kzalloc(buf_size, GFP_ATOMIC);
if (rfi == NULL) {
brcmf_err("failed to alloc buffer\n");
- brcmf_netif_rx(ifp, pkt, false);
+ brcmf_netif_rx(ifp, pkt);
return;
}
@@ -1819,7 +1819,7 @@ void brcmf_fws_rxreorder(struct brcmf_if
netif_rx:
skb_queue_walk_safe(&reorder_list, pkt, pnext) {
__skb_unlink(pkt, &reorder_list);
- brcmf_netif_rx(ifp, pkt, false);
+ brcmf_netif_rx(ifp, pkt);
}
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -1157,7 +1157,7 @@ brcmf_msgbuf_process_rx_complete(struct
brcmu_pkt_buf_free_skb(skb);
return;
}
- brcmf_netif_rx(ifp, skb, false);
+ brcmf_netif_rx(ifp, skb);
}

View File

@ -1,88 +0,0 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Mon, 11 Apr 2016 11:35:28 +0200
Subject: [PATCH] brcmfmac: create common function for handling
brcmf_proto_hdrpull()
In receive path brcmf_proto_hdrpull() needs to be called and handled
similar in brcmf_rx_frame() and brcmf_rx_event(). Move that duplicated
code in separate function.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -322,26 +322,35 @@ void brcmf_netif_rx(struct brcmf_if *ifp
netif_rx_ni(skb);
}
-void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event)
+static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb,
+ struct brcmf_if **ifp)
{
- struct brcmf_if *ifp;
- struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- struct brcmf_pub *drvr = bus_if->drvr;
int ret;
- brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
-
/* process and remove protocol-specific header */
- ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp);
+ ret = brcmf_proto_hdrpull(drvr, true, skb, ifp);
- if (ret || !ifp || !ifp->ndev) {
+ if (ret || !(*ifp) || !(*ifp)->ndev) {
if (ret != -ENODATA && ifp)
- ifp->stats.rx_errors++;
+ (*ifp)->stats.rx_errors++;
brcmu_pkt_buf_free_skb(skb);
- return;
+ return -ENODATA;
}
- skb->protocol = eth_type_trans(skb, ifp->ndev);
+ skb->protocol = eth_type_trans(skb, (*ifp)->ndev);
+ return 0;
+}
+
+void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event)
+{
+ struct brcmf_if *ifp;
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_pub *drvr = bus_if->drvr;
+
+ brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
+
+ if (brcmf_rx_hdrpull(drvr, skb, &ifp))
+ return;
if (brcmf_proto_is_reorder_skb(skb)) {
brcmf_proto_rxreorder(ifp, skb);
@@ -359,21 +368,11 @@ void brcmf_rx_event(struct device *dev,
struct brcmf_if *ifp;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_pub *drvr = bus_if->drvr;
- int ret;
brcmf_dbg(EVENT, "Enter: %s: rxp=%p\n", dev_name(dev), skb);
- /* process and remove protocol-specific header */
- ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp);
-
- if (ret || !ifp || !ifp->ndev) {
- if (ret != -ENODATA && ifp)
- ifp->stats.rx_errors++;
- brcmu_pkt_buf_free_skb(skb);
+ if (brcmf_rx_hdrpull(drvr, skb, &ifp))
return;
- }
-
- skb->protocol = eth_type_trans(skb, ifp->ndev);
brcmf_fweh_process_skb(ifp->drvr, skb);
brcmu_pkt_buf_free_skb(skb);

View File

@ -8,7 +8,7 @@
+ return;
+#endif
+
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
for (band = 0; band < NUM_NL80211_BANDS; band++) {
if (!wiphy->bands[band])
continue;
@@ -374,6 +378,10 @@ ath_reg_apply_ir_flags(struct wiphy *wip
@ -19,7 +19,7 @@
+ return;
+#endif
+
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
sband = wiphy->bands[NL80211_BAND_2GHZ];
if (!sband)
return;
@@ -402,6 +410,10 @@ static void ath_reg_apply_radar_flags(st
@ -30,7 +30,7 @@
+ return;
+#endif
+
if (!wiphy->bands[IEEE80211_BAND_5GHZ])
if (!wiphy->bands[NL80211_BAND_5GHZ])
return;
@@ -633,6 +645,11 @@ ath_regd_init_wiphy(struct ath_regulator
@ -59,7 +59,7 @@
---help---
--- a/.local-symbols
+++ b/.local-symbols
@@ -125,6 +125,7 @@ ADM8211=
@@ -127,6 +127,7 @@ ADM8211=
ATH_COMMON=
WLAN_VENDOR_ATH=
ATH_DEBUG=

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -722,6 +722,7 @@ static const struct ieee80211_iface_limi
@@ -728,6 +728,7 @@ static const struct ieee80211_iface_limi
BIT(NL80211_IFTYPE_AP) },
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) },

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1301,6 +1301,53 @@ void ath9k_deinit_debug(struct ath_softc
@@ -1319,6 +1319,53 @@ void ath9k_deinit_debug(struct ath_softc
ath9k_cmn_spectral_deinit_debug(&sc->spec_priv);
}
@ -54,7 +54,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -1320,6 +1367,8 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -1338,6 +1385,8 @@ int ath9k_init_debug(struct ath_hw *ah)
ath9k_tx99_init_debug(sc);
ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy);

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -1024,23 +1024,23 @@ static int __init ath9k_init(void)
@@ -1030,23 +1030,23 @@ static int __init ath9k_init(void)
{
int error;

View File

@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1348,6 +1348,52 @@ static const struct file_operations fops
@@ -1366,6 +1366,52 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
@ -53,7 +53,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
@@ -1369,6 +1415,8 @@ int ath9k_init_debug(struct ath_hw *ah)
@@ -1387,6 +1433,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_eeprom);
@ -90,7 +90,7 @@
ichan->channel = chan->center_freq;
ichan->chan = chan;
@@ -308,7 +310,19 @@ static void ath9k_cmn_update_ichannel(st
if (chan->band == IEEE80211_BAND_5GHZ)
if (chan->band == NL80211_BAND_5GHZ)
flags |= CHANNEL_5GHZ;
- switch (chandef->width) {

Some files were not shown because too many files have changed in this diff Show More