orion: Add support for 4.4 kernel

Patches and configuration apply just fine on the Marvell Orion target.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
owl
Florian Fainelli 2016-11-29 17:09:56 -08:00 committed by Felix Fietkau
parent cec7e661e7
commit da5155b1a5
5 changed files with 1124 additions and 0 deletions

View File

@ -0,0 +1,422 @@
# CONFIG_AF_KCM is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APM_EMULATION is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_ARCH_ASPEED is not set
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_CPU_AUTO=y
# CONFIG_ARCH_MULTI_V4 is not set
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_ORION5X_DT is not set
# CONFIG_ARCH_OXNAS is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
# CONFIG_ARM_CPU_SUSPEND is not set
# CONFIG_ARM_CRYPTO is not set
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_MODULE_PLTS is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_THUMB is not set
# CONFIG_ARM_TIMER_SP804 is not set
CONFIG_ATAGS=y
# CONFIG_ATH5K_PCI is not set
CONFIG_AUTO_ZRELADDR=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BLK_MQ_PCI=y
# CONFIG_BNXT is not set
# CONFIG_CACHE_L2X0 is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
# CONFIG_CLK_QORIQ is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 earlyprintk"
CONFIG_CMDLINE_FORCE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_CORESIGHT is not set
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FEROCEON=y
CONFIG_CPU_FEROCEON_OLD_ID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_SW_DOMAIN_PAN=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_USE_DOMAINS=y
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_LL_UART_8250=y
# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
CONFIG_DEBUG_UART_PHYS=0xf1012000
CONFIG_DEBUG_UART_VIRT=0xfe012000
CONFIG_DEBUG_UNCOMPRESS=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_DEVMEM=y
CONFIG_DNOTIFY=y
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DST_CACHE is not set
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EFI is not set
CONFIG_ELFCORE=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_FPGA is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GCC_PLUGINS is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_GOLDFISH is not set
CONFIG_GPIOLIB=y
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_SYSFS=y
# CONFIG_GPIO_ZX is not set
# CONFIG_GREYBUS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_HIP04_ETH is not set
# CONFIG_HISI_FEMAC is not set
# CONFIG_HNS is not set
# CONFIG_HNS_DSAF is not set
# CONFIG_HNS_ENET is not set
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_INTEL_TH is not set
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_IOMMU_HELPER=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_IRQ_POLL is not set
CONFIG_IRQ_WORK=y
# CONFIG_ISA_BUS_API is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_TRIGGER_MTD is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LIBFDT=y
# CONFIG_LNET is not set
# CONFIG_LWTUNNEL is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_MACH_ASM9260 is not set
# CONFIG_MACH_D2NET_DT is not set
# CONFIG_MACH_DB88F5281 is not set
# CONFIG_MACH_DNS323 is not set
# CONFIG_MACH_DT2 is not set
# CONFIG_MACH_KUROBOX_PRO is not set
# CONFIG_MACH_LINKSTATION_LSCHL is not set
# CONFIG_MACH_LINKSTATION_LS_HGL is not set
# CONFIG_MACH_LINKSTATION_MINI is not set
# CONFIG_MACH_LINKSTATION_PRO is not set
# CONFIG_MACH_MSS2_DT is not set
# CONFIG_MACH_MV2120 is not set
# CONFIG_MACH_NET2BIG is not set
# CONFIG_MACH_RD88F5181L_FXO is not set
# CONFIG_MACH_RD88F5181L_GE is not set
# CONFIG_MACH_RD88F5182 is not set
# CONFIG_MACH_RD88F5182_DT is not set
# CONFIG_MACH_RD88F6183AP_GE is not set
# CONFIG_MACH_TERASTATION_PRO2 is not set
# CONFIG_MACH_TS209 is not set
# CONFIG_MACH_TS409 is not set
# CONFIG_MACH_TS78XX is not set
CONFIG_MACH_WNR854T=y
CONFIG_MACH_WRT350N_V2=y
# CONFIG_MACSEC is not set
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_MAY_USE_DEVLINK=y
# CONFIG_MDIO_HISI_FEMAC is not set
CONFIG_MEMBARRIER=y
# CONFIG_MEMTEST is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_MIGHT_HAVE_PCI=y
# CONFIG_MLXSW_CORE is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MOST is not set
# CONFIG_MPLS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MULTIUSER=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MV643XX_ETH=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVNETA_BM is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_DEVLINK is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_NO_BOOTMEM=y
# CONFIG_NTB is not set
# CONFIG_NVM is not set
# CONFIG_NVMEM is not set
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_PAGE_EXTENSION is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PAGE_OWNER is not set
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PCI=y
# CONFIG_PCIE_ALTERA is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PLAT_ORION=y
CONFIG_PLAT_ORION_LEGACY=y
CONFIG_PRINTK_NMI=y
# CONFIG_PROC_CHILDREN is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_QED is not set
# CONFIG_RAS is not set
CONFIG_RATIONAL=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
# CONFIG_RCU_EXPERT is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SBITMAP=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_MOXA is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SG_POOL is not set
# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_SOC_BRCMSTB is not set
CONFIG_SPARSE_IRQ=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SRAM=y
CONFIG_SRCU=y
# CONFIG_STAGING_BOARD is not set
# CONFIG_STM is not set
# CONFIG_STREAM_PARSER is not set
# CONFIG_SUNXI_SRAM is not set
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
# CONFIG_SYNC_FILE is not set
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_TCP_CONG_BBR is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_UUID is not set
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_UBSAN is not set
CONFIG_UID16=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFP is not set
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
# CONFIG_WATCHDOG_SYSFS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0

View File

@ -0,0 +1,32 @@
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -134,11 +134,11 @@ static struct mtd_partition wrt350n_v2_n
{
.name = "kernel",
.offset = 0x00000000,
- .size = 0x00760000,
+ .size = 0x00140000, // change to kernel mtd size here (1/3)
}, {
.name = "rootfs",
- .offset = 0x001a0000,
- .size = 0x005c0000,
+ .offset = 0x00140000, // change to kernel mtd size here (2/3)
+ .size = 0x00610000, // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size>
}, {
.name = "lang",
.offset = 0x00760000,
@@ -151,6 +151,14 @@ static struct mtd_partition wrt350n_v2_n
.name = "u-boot",
.offset = 0x007c0000,
.size = 0x00040000,
+ }, {
+ .name = "eRcOmM_do_not_touch",
+ .offset = 0x00750000,
+ .size = 0x00010000, // erasesize
+ }, {
+ .name = "image", // for sysupgrade
+ .offset = 0x00000000,
+ .size = 0x00750000,
},
};

View File

@ -0,0 +1,25 @@
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -57,15 +57,19 @@ static struct mtd_partition wnr854t_nor_
{
.name = "kernel",
.offset = 0x00000000,
- .size = 0x00100000,
+ .size = 0x00140000,
}, {
.name = "rootfs",
- .offset = 0x00100000,
- .size = 0x00660000,
+ .offset = 0x00140000,
+ .size = 0x00620000,
}, {
.name = "uboot",
.offset = 0x00760000,
.size = 0x00040000,
+ }, {
+ .name = "image", // for sysupgrade
+ .offset = 0x00000000,
+ .size = 0x00760000,
},
};

View File

@ -0,0 +1,570 @@
Index: linux-3.18.43/arch/arm/mach-orion5x/Kconfig
===================================================================
--- linux-3.18.43.orig/arch/arm/mach-orion5x/Kconfig
+++ linux-3.18.43/arch/arm/mach-orion5x/Kconfig
@@ -36,6 +36,13 @@ config MACH_RD88F5182_DT
Say 'Y' here if you want your kernel to support the Marvell
Orion-NAS (88F5182) RD2, Flattened Device Tree.
+config MACH_DT2
+ bool "Freecom DataTank Gateway"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Freecom DataTank Gateway
+
config MACH_KUROBOX_PRO
bool "KuroBox Pro"
select I2C_BOARDINFO
Index: linux-3.18.43/arch/arm/mach-orion5x/Makefile
===================================================================
--- linux-3.18.43.orig/arch/arm/mach-orion5x/Makefile
+++ linux-3.18.43/arch/arm/mach-orion5x/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_TS78XX) += ts78xx-setu
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
+obj-$(CONFIG_MACH_DT2) += dt2-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
Index: linux-3.18.43/arch/arm/mach-orion5x/dt2-common.h
===================================================================
--- /dev/null
+++ linux-3.18.43/arch/arm/mach-orion5x/dt2-common.h
@@ -0,0 +1,82 @@
+#ifndef __INC_DT2_COMMON_H
+#define __INC_DT2_COMMON_H
+
+#define ATAG_MV_UBOOT 0x41000403
+
+struct tag_mv_uboot {
+ u32 uboot_version;
+ u32 tclk;
+ u32 sysclk;
+ u32 isUsbHost;
+ u32 overEthAddr;
+ u8 dt2_eeprom[256];
+};
+
+#define DT2_EEPROM_ADDR 0x50
+#define DT2_EEPROM_OFFSET 0
+#define DT2_EEPROM_LENGTH 256
+
+#define DT2_SERIAL_NUMBER_DEFAULT "run on default\0"
+#define DT2_REVISION_DEFAULT_INIT 0xFF
+#define DT2_CONFIG_FLAGS_DEFAULT 0x00
+
+#define _PACKED_ __attribute__((packed))
+
+struct DT2_EEPROM_SD_CONFIG {
+ unsigned int ram_1;
+ unsigned int ram_2;
+ unsigned int ram_3;
+ unsigned int ram_4;
+ unsigned char ram_5;
+ unsigned char ram_6;
+ unsigned short ram_7;
+ unsigned int magic_id;
+ } _PACKED_; // 24 Bytes in total
+
+struct DT2_EEPROM_FC_CONFIG {
+ unsigned char rtc_sts_mask;
+ unsigned char rtc_sts_init;
+ unsigned char rtc_int_mask;
+ unsigned char rtc_int_init;
+ unsigned char rtc_atrim_init;
+ unsigned char rtc_dtrim_init;
+ unsigned char dummy1;
+ unsigned char dummy2;
+ unsigned char dt2_config_flags; /* 0x80 to load rtc_values to RTC */
+ unsigned char dt2_revision; /* upper nibble is HW, lower nibble is FW */
+ unsigned char dt2_serial_number[16]; /* Serial number of DT-2 */
+ } _PACKED_; // 26 Bytes in total
+
+#define CFG_LOAD_RTC_VALUES 0x80
+
+struct DT2_EEPROM_GW_CONFIG {
+ unsigned int dummy1;
+ unsigned int dummy2;
+ unsigned int dummy3;
+ unsigned char dummy4;
+ unsigned char tos_video_val1;
+ unsigned char tos_video_val2;
+ unsigned char tos_voip_val;
+ unsigned char qos_igmp_cfg;
+ unsigned char num_of_ifs;
+ unsigned short vlan_ports_if[3];
+ unsigned char mac_addr[3][6];
+ } _PACKED_; // 42 Bytes in total
+
+#define _SIZE_OF_ALL_STRUCTS_ (sizeof(struct DT2_EEPROM_SD_CONFIG) + sizeof(struct DT2_EEPROM_FC_CONFIG) + sizeof(struct DT2_EEPROM_GW_CONFIG))
+
+// MV = EEPROM - SD - FC - GW - CRC
+struct DT2_EEPROM_MV_CONFIG {
+ unsigned int reg_addr[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)];
+ unsigned int reg_data[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)];
+ } _PACKED_;
+
+struct DT2_EEPROM_STRUCT {
+ struct DT2_EEPROM_MV_CONFIG mv;
+ struct DT2_EEPROM_SD_CONFIG sd;
+ struct DT2_EEPROM_FC_CONFIG fc;
+ struct DT2_EEPROM_GW_CONFIG gw;
+ unsigned int crc;
+ } _PACKED_;
+
+#endif
Index: linux-3.18.43/arch/arm/mach-orion5x/dt2-setup.c
===================================================================
--- /dev/null
+++ linux-3.18.43/arch/arm/mach-orion5x/dt2-setup.c
@@ -0,0 +1,448 @@
+/*
+ * arch/arm/mach-orion5x/dt2-setup.c
+ *
+ * Freecom DataTank Gateway Setup
+ *
+ * Copyright (C) 2009 Zintis Petersons <Zintis.Petersons@abcsolutions.lv>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <net/dsa.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * DT2 local
+ ****************************************************************************/
+#include <asm/setup.h>
+#include "dt2-common.h"
+
+u32 mvUbootVer = 0;
+u32 mvTclk = 166666667;
+u32 mvSysclk = 200000000;
+u32 mvIsUsbHost = 1;
+u32 overEthAddr = 0;
+u32 gBoardId = -1;
+struct DT2_EEPROM_STRUCT dt2_eeprom;
+
+/*****************************************************************************
+ * DT2 Info
+ ****************************************************************************/
+/*
+ * PCI
+ */
+
+#define DT2_PCI_SLOT0_OFFS 7
+#define DT2_PCI_SLOT0_IRQ_A_PIN 3
+#define DT2_PCI_SLOT0_IRQ_B_PIN 2
+
+#define DT2_PIN_GPIO_SYNC 25
+#define DT2_PIN_GPIO_POWER 24
+#define DT2_PIN_GPIO_UNPLUG1 23
+#define DT2_PIN_GPIO_UNPLUG2 22
+#define DT2_PIN_GPIO_RESET 4
+
+#define DT2_NOR_BOOT_BASE 0xf4000000
+#define DT2_NOR_BOOT_SIZE SZ_512K
+
+#define DT2_LEDS_BASE 0xfa000000
+#define DT2_LEDS_SIZE SZ_1K
+
+/*****************************************************************************
+ * 512K NOR Flash on Device bus Boot CS
+ ****************************************************************************/
+
+static struct mtd_partition dt2_partitions[] = {
+ {
+ .name = "u-boot",
+ .size = 0x00080000,
+ .offset = 0,
+ },
+};
+
+static struct physmap_flash_data dt2_nor_flash_data = {
+ .width = 1, /* 8 bit bus width */
+ .parts = dt2_partitions,
+ .nr_parts = ARRAY_SIZE(dt2_partitions)
+};
+
+static struct resource dt2_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DT2_NOR_BOOT_BASE,
+ .end = DT2_NOR_BOOT_BASE + DT2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device dt2_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &dt2_nor_flash_data,
+ },
+ .resource = &dt2_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init dt2_pci_preinit(void)
+{
+ int pin, irq;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = DT2_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq = gpio_to_irq(pin);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to "
+ "irq_set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = DT2_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq = gpio_to_irq(pin);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to "
+ "irq_set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "dt2_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init dt2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1){
+ printk(KERN_INFO "orion5x_pci_map_irq: %d\n", irq);
+ return irq;
+ }
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - DT2_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1){
+ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_A_PIN);
+ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_A_PIN: %d\n", irq);
+ }
+ else {
+ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_B_PIN);
+ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_B_PIN: %d\n", irq);
+ }
+ default:
+ irq = -1;
+ printk(KERN_INFO "dt2_pci_map_irq IRQ: %d\n", irq);
+ }
+
+ return irq;
+}
+
+static struct hw_pci dt2_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = dt2_pci_preinit,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = dt2_pci_map_irq,
+};
+
+static int __init dt2_pci_init(void)
+{
+ if (machine_is_dt2())
+ pci_common_init(&dt2_pci);
+
+ return 0;
+}
+
+subsys_initcall(dt2_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data dt2_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data dt2_switch_chip_data = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "cpu",
+ .port_names[4] = "lan3",
+ .port_names[5] = "lan4",
+};
+
+static struct dsa_platform_data dt2_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &dt2_switch_chip_data,
+};
+
+/*****************************************************************************
+ * RTC ISL1208 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata dt2_i2c_rtc = {
+ I2C_BOARD_INFO("isl1208", 0x6F),
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+static struct mv_sata_platform_data dt2_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int dt2_mpp_modes[] __initdata = {
+ MPP0_GPIO, // RTC interrupt
+ MPP1_GPIO, // 88e6131 interrupt
+ MPP2_GPIO, // PCI_intB
+ MPP3_GPIO, // PCI_intA
+ MPP4_GPIO, // reset button switch
+ MPP5_GPIO,
+ MPP6_GPIO,
+ MPP7_GPIO,
+ MPP8_GPIO,
+ MPP9_GIGE, /* GE_RXERR */
+ MPP10_GPIO, // usb
+ MPP11_GPIO, // usb
+ MPP12_GIGE, // GE_TXD[4]
+ MPP13_GIGE, // GE_TXD[5]
+ MPP14_GIGE, // GE_TXD[6]
+ MPP15_GIGE, // GE_TXD[7]
+ MPP16_GIGE, // GE_RXD[4]
+ MPP17_GIGE, // GE_RXD[5]
+ MPP18_GIGE, // GE_RXD[6]
+ MPP19_GIGE, // GE_RXD[7]
+ 0,
+};
+
+/*****************************************************************************
+ * LEDS
+ ****************************************************************************/
+static struct platform_device dt2_leds = {
+ .name = "dt2-led",
+ .id = -1,
+};
+
+/****************************************************************************
+ * GPIO key
+ ****************************************************************************/
+static irqreturn_t dt2_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset which does an emergency reboot. */
+ printk(KERN_INFO "Restarting system.\n");
+ machine_restart(NULL);
+
+ /* This should never be reached. */
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dt2_power_handler(int irq, void *dev_id)
+{
+ printk(KERN_INFO "Shutting down system.\n");
+ machine_power_off();
+ return IRQ_HANDLED;
+}
+
+static void __init dt2_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(dt2_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+
+ orion5x_uart0_init();
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_i2c_init();
+ orion5x_sata_init(&dt2_sata_data);
+ orion5x_xor_init();
+
+ printk(KERN_INFO "U-Boot parameters:\n");
+ printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId);
+
+ printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
+ printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
+ printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n",
+ dt2_eeprom.gw.mac_addr[0]);
+ printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n",
+ dt2_eeprom.gw.mac_addr[1]);
+
+ orion5x_eth_init(&dt2_eth_data);
+ memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
+ orion5x_eth_switch_init(&dt2_switch_plat_data, NO_IRQ);
+
+ i2c_register_board_info(0, &dt2_i2c_rtc, 1);
+
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE);
+
+ platform_device_register(&dt2_nor_flash);
+
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+ ORION_MBUS_DEVBUS_ATTR(0),
+ DT2_LEDS_BASE, DT2_LEDS_SIZE);
+ platform_device_register(&dt2_leds);
+
+ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler,
+ IRQF_TRIGGER_LOW,
+ "DT2: Reset button", NULL) < 0) {
+
+ printk("DT2: Reset Button IRQ %d not available\n",
+ gpio_to_irq(DT2_PIN_GPIO_RESET));
+ }
+
+ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler,
+ IRQF_TRIGGER_LOW,
+ "DT2: Power button", NULL) < 0) {
+
+ printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n",
+ gpio_to_irq(DT2_PIN_GPIO_POWER));
+ }
+}
+
+static int __init parse_tag_dt2_uboot(const struct tag *t)
+{
+ struct tag_mv_uboot *mv_uboot;
+
+ // Get pointer to our block
+ mv_uboot = (struct tag_mv_uboot*)&t->u;
+ mvTclk = mv_uboot->tclk;
+ mvSysclk = mv_uboot->sysclk;
+ mvUbootVer = mv_uboot->uboot_version;
+ mvIsUsbHost = mv_uboot->isUsbHost;
+
+ // Some clock fixups
+ if(mvTclk == 166000000) mvTclk = 166666667;
+ else if(mvTclk == 133000000) mvTclk = 133333333;
+ else if(mvSysclk == 166000000) mvSysclk = 166666667;
+
+ gBoardId = (mvUbootVer & 0xff);
+
+ //DT2 specific data
+ memcpy(&dt2_eeprom, mv_uboot->dt2_eeprom, sizeof(struct DT2_EEPROM_STRUCT));
+
+ return 0;
+}
+__tagtable(ATAG_MV_UBOOT, parse_tag_dt2_uboot);
+
+/*
+ * This is OpenWrt specific fixup. It includes code from original "tag_fixup_mem32" to
+ * fixup bogus memory tags and also fixes kernel cmdline by adding " init=/etc/preinit"
+ * at the end. It is important to flash OpenWrt image from original Freecom firmware.
+ *
+ * Vanilla kernel should use "tag_fixup_mem32" function.
+ */
+static void __init openwrt_fixup(struct tag *t, char **from)
+{
+ char *p = NULL;
+ static char openwrt_init_tag[] __initdata = " init=/etc/preinit";
+
+ for (; t->hdr.size; t = tag_next(t)){
+ /* Locate the Freecom cmdline */
+ if (t->hdr.tag == ATAG_CMDLINE) {
+ p = t->u.cmdline.cmdline;
+ printk("%s(%d): Found cmdline '%s' at 0x%0lx\n",
+ __FUNCTION__, __LINE__, p, (unsigned long)p);
+ }
+ /*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+ if (t->hdr.tag == ATAG_MEM &&
+ (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+ t->u.mem.start & ~PAGE_MASK)) {
+ printk(KERN_WARNING
+ "Clearing invalid memory bank %dKB@0x%08x\n",
+ t->u.mem.size / 1024, t->u.mem.start);
+ t->hdr.tag = 0;
+ }
+ }
+
+ printk("%s(%d): End of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
+
+ /* Overwrite the end of the table with a new cmdline tag. */
+ t->hdr.tag = ATAG_CMDLINE;
+ t->hdr.size =
+ (sizeof (struct tag_header) +
+ strlen(p) + strlen(openwrt_init_tag) + 1 + 4) >> 2;
+
+ strlcpy(t->u.cmdline.cmdline, p, COMMAND_LINE_SIZE);
+ strlcpy(t->u.cmdline.cmdline + strlen(p), openwrt_init_tag,
+ COMMAND_LINE_SIZE - strlen(p));
+
+ printk("%s(%d): New cmdline '%s' at 0x%0lx\n",
+ __FUNCTION__, __LINE__,
+ t->u.cmdline.cmdline, (unsigned long)t->u.cmdline.cmdline);
+
+ t = tag_next(t);
+
+ printk("%s(%d): New end of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t);
+
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+}
+
+/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */
+MACHINE_START(DT2, "Freecom DataTank Gateway")
+ /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */
+ .atag_offset = 0x100,
+ .init_machine = dt2_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .init_time = orion5x_timer_init,
+ .fixup = openwrt_fixup, //tag_fixup_mem32,
+MACHINE_END

View File

@ -0,0 +1,75 @@
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -147,10 +147,13 @@ config MACH_MSS2_DT
Maxtor Shared Storage II platform.
config MACH_WNR854T
- bool "Netgear WNR854T"
+ bool "Netgear WNR854T / WN802T"
help
Say 'Y' here if you want your kernel to support the
- Netgear WNR854T platform.
+ Netgear WNR854T or WN802T platform.
+
+config MACH_WN802T
+ def_bool MACH_WNR854T
config MACH_RD88F5181L_GE
bool "Marvell Orion-VoIP GE Reference Design"
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -115,6 +115,15 @@ static struct dsa_platform_data wnr854t_
.chip = &wnr854t_switch_chip_data,
};
+static struct dsa_chip_data wn802t_switch_chip_data = {
+ .port_names[2] = "wan",
+ .port_names[3] = "cpu",
+};
+
+static struct dsa_platform_data wn802t_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &wn802t_switch_chip_data,
+};
static void __init wnr854t_init(void)
{
/*
@@ -128,7 +137,12 @@ static void __init wnr854t_init(void)
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
- orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
+
+ if (machine_is_wn802t())
+ orion5x_eth_switch_init(&wn802t_switch_plat_data, NO_IRQ);
+ else
+ orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
+
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
@@ -168,7 +182,7 @@ static struct hw_pci wnr854t_pci __initd
static int __init wnr854t_pci_init(void)
{
- if (machine_is_wnr854t())
+ if (machine_is_wnr854t() || machine_is_wn802t())
pci_common_init(&wnr854t_pci);
return 0;
@@ -186,3 +200,15 @@ MACHINE_START(WNR854T, "Netgear WNR854T"
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END
+
+MACHINE_START(WN802T, "Netgear WN802T")
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .atag_offset = 0x100,
+ .init_machine = wnr854t_init,
+ .map_io = orion5x_map_io,
+ .init_early = orion5x_init_early,
+ .init_irq = orion5x_init_irq,
+ .init_time = orion5x_timer_init,
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
+MACHINE_END