- bump atheros to .26 - adds leds-gpio to default selection on atheros - extend led platform setup on atheros

SVN-Revision: 12100
owl
John Crispin 2008-08-04 21:22:00 +00:00
parent 4c195465a8
commit d38b4fd256
3 changed files with 35 additions and 11 deletions

View File

@ -11,7 +11,7 @@ BOARD:=atheros
BOARDNAME:=Atheros 231x/5312
FEATURES:=squashfs jffs2
LINUX_VERSION:=2.6.23.17
LINUX_VERSION:=2.6.26
include $(INCLUDE_DIR)/target.mk

View File

@ -251,3 +251,4 @@ CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_ZONE_DMA_FLAG=0
CONFIG_LEDS_GPIO=y

View File

@ -93,11 +93,9 @@ static struct platform_device ar5315_spiflash = {
};
#ifdef CONFIG_LEDS_GPIO
static struct gpio_led ar5315_leds[] = {
{ .name = "wlan", .gpio = 0, .active_low = 1, },
};
static struct gpio_led ar5315_leds[8];
static const struct gpio_led_platform_data ar5315_led_data = {
static struct gpio_led_platform_data ar5315_led_data = {
.num_leds = ARRAY_SIZE(ar5315_leds),
.leds = (void *) ar5315_leds,
};
@ -111,11 +109,8 @@ static struct platform_device ar5315_gpio_leds = {
};
#endif
static __initdata struct platform_device *ar5315_devs[5];
static void *flash_regs;
static inline __u32 spiflash_regread32(int reg)
@ -147,12 +142,12 @@ static __u8 spiflash_probe(void)
spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
(1 << 4) | SPI_CTL_START;
(1 << 4) | SPI_CTL_START;
spiflash_regwrite32(SPI_FLASH_CTL, reg);
do {
reg = spiflash_regread32(SPI_FLASH_CTL);
reg = spiflash_regread32(SPI_FLASH_CTL);
} while (reg & SPI_CTL_BUSY);
reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
@ -206,6 +201,10 @@ int __init ar5315_init_devices(void)
struct ar531x_config *config;
struct ar531x_boarddata *bcfg;
int dev = 0;
#ifdef CONFIG_LEDS_GPIO
int i;
char *tmp;
#endif
if (!is_5315)
return 0;
@ -246,7 +245,31 @@ int __init ar5315_init_devices(void)
ar5315_devs[dev++] = &ar5315_spiflash;
#ifdef CONFIG_LEDS_GPIO
ar5315_leds[0].gpio = bcfg->sysLedGpio;
ar5315_led_data.num_leds = 0;
for(i = 0; i < 8; i++)
{
if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio))
{
if(i == bcfg->sysLedGpio)
{
tmp = kstrdup("wlan", GFP_KERNEL);
} else {
tmp = kmalloc(6, GFP_KERNEL);
if(tmp)
sprintf((char*)tmp, "gpio%d", i);
}
if(tmp)
{
ar5315_leds[ar5315_led_data.num_leds].name = tmp;
ar5315_leds[ar5315_led_data.num_leds].gpio = i;
ar5315_leds[ar5315_led_data.num_leds].active_low = 0;
ar5315_led_data.num_leds++;
} else {
printk("failed to alloc led string\n");
continue;
}
}
}
ar5315_devs[dev++] = &ar5315_gpio_leds;
#endif