cns3xxx: add experimental 3.18 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43406

target/linux/cns3xxx/config-3.18

@@ -0,0 +1,290 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_MULTI_V6_V7=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_ARCH_WM8750 is not set
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+# CONFIG_ATA_SFF is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CNS3XXX_ETH=y
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_PXA is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_UART_BCM63XX is not set
+# CONFIG_DEBUG_UART_PL01X is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DMA_CACHE_FIQ_BROADCAST=y
+CONFIG_DTC=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FIQ=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CNS3XXX=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_INTEL_SOC_PMIC is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KERNFS=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+CONFIG_LIBFDT=y
+# CONFIG_MACH_CNS3420VB is not set
+CONFIG_MACH_GW2388=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MFD_AXP20X is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_CNS3XXX=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_NTP_PPS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PHY_SAMSUNG_USB2 is not set
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_PPS=y
+CONFIG_PPS_CLIENT_GPIO=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PROC_STRIPPED is not set
+CONFIG_RAID_ATTRS=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCSI=y
+CONFIG_SENSORS_AD7418=y
+CONFIG_SENSORS_GSC=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_CNS3XXX=y
+CONFIG_SPI_MASTER=y
+# CONFIG_STAGING is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_CNS3XXX_EHCI=y
+CONFIG_USB_CNS3XXX_OHCI=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_DEBUG is not set
+CONFIG_USB_DWC2_HOST=y
+# CONFIG_USB_DWC2_PCI is not set
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_PLATFORM=y
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_PCI=y
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_XILINX is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZONE_DMA_FLAG=0

target/linux/cns3xxx/patches-3.18/000-cns3xxx_arch_include.patch

@@ -0,0 +1,8 @@
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -1,3 +1,5 @@
++ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
++
+ obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
+ cns3xxx-y				+= core.o pm.o
+ cns3xxx-$(CONFIG_ATAGS)			+= devices.o

target/linux/cns3xxx/patches-3.18/001-cns3xxx_section_fix.patch

@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -339,7 +339,7 @@ static struct usb_ohci_pdata cns3xxx_usb
+ 	.power_off	= csn3xxx_usb_power_off,
+ };
+ 
+-static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
++static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
+ 	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
+ 	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
+ 	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },

target/linux/cns3xxx/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch

@@ -0,0 +1,64 @@
+--- a/arch/arm/include/asm/glue-cache.h
++++ b/arch/arm/include/asm/glue-cache.h
+@@ -156,11 +156,19 @@ static inline void nop_dma_unmap_area(co
+ #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
+ #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+ #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+ #define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
+ 
+ #define dmac_map_area			__glue(_CACHE,_dma_map_area)
+ #define dmac_unmap_area			__glue(_CACHE,_dma_unmap_area)
+ #define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
++#else
++#define __cpuc_flush_dcache_area	__glue(fiq,_flush_kern_dcache_area)
++
++#define dmac_map_area			__glue(fiq,_dma_map_area)
++#define dmac_unmap_area			__glue(fiq,_dma_unmap_area)
++#define dmac_flush_range		__glue(fiq,_dma_flush_range)
++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */
+ #endif
+ 
+ #endif
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -844,6 +844,17 @@ config DMA_CACHE_RWFO
+ 	  in hardware, other workarounds are needed (e.g. cache
+ 	  maintenance broadcasting in software via FIQ).
+ 
++config DMA_CACHE_FIQ_BROADCAST
++	bool "Enable fiq broadcast DMA cache maintenance"
++	depends on CPU_V6K && SMP
++	select FIQ
++	help
++	  The Snoop Control Unit on ARM11MPCore does not detect the
++	  cache maintenance operations and the dma_{map,unmap}_area()
++	  functions may leave stale cache entries on other CPUs. By
++	  enabling this option, fiq broadcast in the ARMv6
++	  DMA cache maintenance functions is performed.
++
+ config OUTER_CACHE
+ 	bool
+ 
+--- a/arch/arm/mm/flush.c
++++ b/arch/arm/mm/flush.c
+@@ -304,6 +304,7 @@ void __sync_icache_dcache(pte_t pteval)
+ void flush_dcache_page(struct page *page)
+ {
+ 	struct address_space *mapping;
++	bool skip_broadcast = true;
+ 
+ 	/*
+ 	 * The zero page is never written to, so never has any dirty
+@@ -314,7 +315,10 @@ void flush_dcache_page(struct page *page
+ 
+ 	mapping = page_mapping(page);
+ 
+-	if (!cache_ops_need_broadcast() &&
++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
++	skip_broadcast = !cache_ops_need_broadcast();
++#endif
++	if (skip_broadcast &&
+ 	    mapping && !page_mapped(page))
+ 		clear_bit(PG_dcache_clean, &page->flags);
+ 	else {

target/linux/cns3xxx/patches-3.18/020-watchdog_support.patch

@@ -0,0 +1,59 @@
+1. Made the connection between CNS3xxx SOCs(ARCH_CNS3xxx) and MPcore watchdog
+   since the CNS3xxx SOCs have ARM11 MPcore CPU.
+2. Enable mpcore_watchdog option as module to default configuration at
+   arch/arm/configs/cns3420vb_defconfig.
+
+Signed-off-by: Tommy Lin <tommy.lin@caviumnetworks.com>
+
+---
+arch/arm/Kconfig                     |    1 +
+ arch/arm/configs/cns3420vb_defconfig |    2 ++
+ arch/arm/mach-cns3xxx/cns3420vb.c    |   22 ++++++++++++++++++++++
+ 3 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/arm/configs/cns3420vb_defconfig
++++ b/arch/arm/configs/cns3420vb_defconfig
+@@ -56,6 +56,8 @@ CONFIG_LEGACY_PTY_COUNT=16
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_HWMON is not set
+ # CONFIG_VGA_CONSOLE is not set
++CONFIG_WATCHDOG=y
++CONFIG_MPCORE_WATCHDOG=m
+ # CONFIG_HID_SUPPORT is not set
+ # CONFIG_USB_SUPPORT is not set
+ CONFIG_MMC=y
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -206,10 +206,32 @@ static struct platform_device cns3xxx_us
+ 	},
+ };
+ 
++/* Watchdog */
++static struct resource cns3xxx_watchdog_resources[] = {
++	[0] = {
++		.start = CNS3XXX_TC11MP_TWD_BASE,
++		.end   = CNS3XXX_TC11MP_TWD_BASE + PAGE_SIZE - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = IRQ_LOCALWDOG,
++		.end   = IRQ_LOCALWDOG,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device cns3xxx_watchdog_device = {
++	.name		= "mpcore_wdt",
++	.id		= -1,
++	.num_resources	= ARRAY_SIZE(cns3xxx_watchdog_resources),
++	.resource	= cns3xxx_watchdog_resources,
++};
++
+ /*
+  * Initialization
+  */
+ static struct platform_device *cns3420_pdevs[] __initdata = {
++	&cns3xxx_watchdog_device,
+ 	&cns3420_nor_pdev,
+ 	&cns3xxx_usb_ehci_device,
+ 	&cns3xxx_usb_ohci_device,

target/linux/cns3xxx/patches-3.18/025-smp_support.patch

@@ -0,0 +1,30 @@
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -5,3 +5,5 @@ cns3xxx-y				+= core.o pm.o
+ cns3xxx-$(CONFIG_ATAGS)			+= devices.o
+ cns3xxx-$(CONFIG_PCI)			+= pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
++cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o
++cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX
+ 	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+ 	select ARM_GIC
+ 	select PCI_DOMAINS if PCI
++	select HAVE_ARM_SCU if SMP
++	select HAVE_ARM_TWD if LOCAL_TIMERS
++	select HAVE_SMP
+ 	help
+ 	  Support for Cavium Networks CNS3XXX platform.
+ 
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -13,6 +13,7 @@
+ 
+ #include <linux/reboot.h>
+ 
++extern struct smp_operations cns3xxx_smp_ops;
+ extern void cns3xxx_timer_init(void);
+ 
+ #ifdef CONFIG_CACHE_L2X0

target/linux/cns3xxx/patches-3.18/030-pcie_clock.patch

@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -331,8 +331,6 @@ void __init cns3xxx_pcie_init_late(void)
+ 			"imprecise external abort");
+ 
+ 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
+-		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
+ 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+ 		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+ 		pci_common_init(&cns3xxx_pcie[i].hw_pci);

target/linux/cns3xxx/patches-3.18/031-pcie_init.patch

@@ -0,0 +1,33 @@
+--- a/arch/arm/mach-cns3xxx/laguna.c
++++ b/arch/arm/mach-cns3xxx/laguna.c
+@@ -849,7 +849,6 @@ static struct map_desc laguna_io_desc[] 
+ static void __init laguna_map_io(void)
+ {
+ 	cns3xxx_map_io();
+-	cns3xxx_pcie_iotable_init();
+ 	iotable_init(ARRAY_AND_SIZE(laguna_io_desc));
+ 	laguna_early_serial_setup();
+ }
+@@ -873,15 +872,6 @@ static int laguna_register_gpio(struct g
+ 	return ret;
+ }
+ 
+-static int __init laguna_pcie_init(void)
+-{
+-	if (!machine_is_gw2388())
+-		return 0;
+-
+-	return cns3xxx_pcie_init();
+-}
+-subsys_initcall(laguna_pcie_init);
+-
+ static int __init laguna_model_setup(void)
+ {
+ 	u32 __iomem *mem;
+@@ -1075,5 +1065,6 @@ MACHINE_START(GW2388, "Gateworks Corpora
+ 	.init_irq	= cns3xxx_init_irq,
+ 	.init_time	= cns3xxx_timer_init,
+ 	.init_machine	= laguna_init,
++	.init_late      = cns3xxx_pcie_init_late,
+ 	.restart	= cns3xxx_restart,
+ MACHINE_END

target/linux/cns3xxx/patches-3.18/040-fiq_support.patch

@@ -0,0 +1,40 @@
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX
+ 	select HAVE_ARM_SCU if SMP
+ 	select HAVE_ARM_TWD if LOCAL_TIMERS
+ 	select HAVE_SMP
++	select FIQ
+ 	help
+ 	  Support for Cavium Networks CNS3XXX platform.
+ 
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -5,5 +5,5 @@ cns3xxx-y				+= core.o pm.o
+ cns3xxx-$(CONFIG_ATAGS)			+= devices.o
+ cns3xxx-$(CONFIG_PCI)			+= pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
+-cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o
++cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o cns3xxx_fiq.o
+ cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+--- a/arch/arm/mach-cns3xxx/cns3xxx.h
++++ b/arch/arm/mach-cns3xxx/cns3xxx.h
+@@ -267,6 +267,7 @@
+ #define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
+ #define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
+ 
++#define MISC_FIQ_CPU(x)				MISC_MEM_MAP(0xA58 - (x) * 0x4)
+ /*
+  * Power management and clock control
+  */
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -827,7 +827,7 @@ config KUSER_HELPERS
+ 
+ config DMA_CACHE_RWFO
+ 	bool "Enable read/write for ownership DMA cache maintenance"
+-	depends on CPU_V6K && SMP
++	depends on CPU_V6K && SMP && !ARCH_CNS3XXX
+ 	default y
+ 	help
+ 	  The Snoop Control Unit on ARM11MPCore does not detect the

target/linux/cns3xxx/patches-3.18/045-twd_base.patch

@@ -0,0 +1,45 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -17,6 +17,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/usb/ehci_pdriver.h>
+ #include <linux/usb/ohci_pdriver.h>
++#include <asm/smp_twd.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+ #include <asm/mach/time.h>
+@@ -26,6 +27,8 @@
+ #include "core.h"
+ #include "pm.h"
+ 
++#define IRQ_LOCALTIMER 29
++
+ static struct map_desc cns3xxx_io_desc[] __initdata = {
+ 	{
+ 		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+@@ -191,6 +194,17 @@ static struct irqaction cns3xxx_timer_ir
+ 	.handler	= cns3xxx_timer_interrupt,
+ };
+ 
++static void __init cns3xxx_init_twd(void)
++{
++#ifdef CONFIG_LOCAL_TIMERS
++	static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer,
++		CNS3XXX_TC11MP_TWD_BASE,
++		IRQ_LOCALTIMER);
++
++	twd_local_timer_register(&cns3xx_twd_local_timer);
++#endif
++}
++
+ /*
+  * Set up the clock source and clock events devices
+  */
+@@ -244,6 +258,7 @@ static void __init __cns3xxx_timer_init(
+ 	setup_irq(timer_irq, &cns3xxx_timer_irq);
+ 
+ 	cns3xxx_clockevents_init(timer_irq);
++	cns3xxx_init_twd();
+ }
+ 
+ void __init cns3xxx_timer_init(void)

target/linux/cns3xxx/patches-3.18/055-pcie_io.patch

@@ -0,0 +1,19 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -81,6 +81,16 @@ static struct map_desc cns3xxx_io_desc[]
+ 		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+ 		.length		= SZ_16M,
+ 		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_PCIE0_IO_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
++		.length		= SZ_16M,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_PCIE1_IO_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
++		.length		= SZ_16M,
++		.type		= MT_DEVICE,
+ #endif
+ 	},
+ };

target/linux/cns3xxx/patches-3.18/060-pcie_abort.patch

@@ -0,0 +1,129 @@
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -88,6 +88,79 @@ static void __iomem *cns3xxx_pci_cfg_bas
+ 	return base + (where & 0xffc) + (devfn << 12);
+ }
+ 
++static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where)
++{
++	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
++
++  /* check PCI-compatible status register after access */
++	if (cnspci->linked) {
++		void __iomem *host_base;
++		u32 sreg, ereg;
++
++		host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
++		sreg = __raw_readw(host_base + 0x6) & 0xF900;
++		ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
++
++		if (sreg | ereg) {
++			/* SREG:
++			 *  BIT15 - Detected Parity Error
++			 *  BIT14 - Signaled System Error
++			 *  BIT13 - Received Master Abort
++			 *  BIT12 - Received Target Abort
++			 *  BIT11 - Signaled Target Abort
++			 *  BIT08 - Master Data Parity Error
++			 *
++			 * EREG:
++			 *  BIT20 - Unsupported Request
++			 *  BIT19 - ECRC
++			 *  BIT18 - Malformed TLP
++			 *  BIT17 - Receiver Overflow
++			 *  BIT16 - Unexpected Completion
++			 *  BIT15 - Completer Abort
++			 *  BIT14 - Completion Timeout
++			 *  BIT13 - Flow Control Protocol Error
++			 *  BIT12 - Poisoned TLP
++			 *  BIT04 - Data Link Protocol Error
++			 *
++			 * TODO: see Documentation/pci-error-recovery.txt
++			 *    implement error_detected handler
++			 */
++/*
++			printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg);
++			if (sreg & BIT(15)) printk(" <PERR");
++			if (sreg & BIT(14)) printk(" >SERR");
++			if (sreg & BIT(13)) printk(" <MABRT");
++			if (sreg & BIT(12)) printk(" <TABRT");
++			if (sreg & BIT(11)) printk(" >TABRT");
++			if (sreg & BIT( 8)) printk(" MPERR");
++
++			if (ereg & BIT(20)) printk(" Unsup");
++			if (ereg & BIT(19)) printk(" ECRC");
++			if (ereg & BIT(18)) printk(" MTLP");
++			if (ereg & BIT(17)) printk(" OFLOW");
++			if (ereg & BIT(16)) printk(" Unex");
++			if (ereg & BIT(15)) printk(" ABRT");
++			if (ereg & BIT(14)) printk(" COMPTO");
++			if (ereg & BIT(13)) printk(" FLOW");
++			if (ereg & BIT(12)) printk(" PTLP");
++			if (ereg & BIT( 4)) printk(" DLINK");
++			printk("\n");
++*/
++			pr_debug("%s failed port%d sreg=0x%04x\n", __func__,
++				cnspci->hw_pci.domain, sreg);
++
++			/* make sure the status bits are reset */
++			__raw_writew(sreg, host_base + 6);
++			__raw_writel(ereg, host_base + 0x104);
++			return 1;
++		}
++	}
++	else
++		return 1;
++
++  return 0;
++}
++
+ static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ 				   int where, int size, u32 *val)
+ {
+@@ -104,6 +177,11 @@ static int cns3xxx_pci_read_config(struc
+ 
+ 	v = __raw_readl(base);
+ 
++	if (check_master_abort(bus, devfn, where)) {
++		printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
++		return PCIBIOS_DEVICE_NOT_FOUND;
++	}
++
+ 	if (bus->number == 0 && devfn == 0 &&
+ 			(where & 0xffc) == PCI_CLASS_REVISION) {
+ 		/*
+@@ -133,11 +211,19 @@ static int cns3xxx_pci_write_config(stru
+ 		return PCIBIOS_SUCCESSFUL;
+ 
+ 	v = __raw_readl(base);
++	if (check_master_abort(bus, devfn, where)) {
++		printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
++		return PCIBIOS_DEVICE_NOT_FOUND;
++	}
+ 
+ 	v &= ~(mask << shift);
+ 	v |= (val & mask) << shift;
+ 
+ 	__raw_writel(v, base);
++	if (check_master_abort(bus, devfn, where)) {
++		printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on write\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
++		return PCIBIOS_DEVICE_NOT_FOUND;
++	}
+ 
+ 	return PCIBIOS_SUCCESSFUL;
+ }
+@@ -315,8 +401,14 @@ static void __init cns3xxx_pcie_hw_init(
+ static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
+ 				      struct pt_regs *regs)
+ {
++#if 0
++/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE
++ * ignore imprecise aborts and use PCI-compatible Status register to
++ * determine errors instead
++ */
+ 	if (fsr & (1 << 10))
+ 		regs->ARM_pc += 4;
++#endif
+ 	return 0;
+ }
+ 

target/linux/cns3xxx/patches-3.18/065-pcie_skip_inactive.patch

@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -424,6 +424,8 @@ void __init cns3xxx_pcie_init_late(void)
+ 
+ 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+ 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
++		if (!cns3xxx_pcie[i].linked)
++			continue;
+ 		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+ 		pci_common_init(&cns3xxx_pcie[i].hw_pci);
+ 	}

target/linux/cns3xxx/patches-3.18/070-i2c_support.patch

@@ -0,0 +1,31 @@
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -416,6 +416,18 @@ config I2C_CBUS_GPIO
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called i2c-cbus-gpio.
+ 
++config I2C_CNS3XXX
++	tristate "Cavium CNS3xxx I2C driver"
++	depends on ARCH_CNS3XXX
++	help
++	  Support for Cavium CNS3xxx I2C controller driver.
++
++	  This driver can also be built as a module.  If so, the module
++	  will be called i2c-cns3xxx.
++
++	  Please note that this driver might be needed to bring up other
++	  devices such as Cavium CNS3xxx Ethernet.
++
+ config I2C_CPM
+ 	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+ 	depends on CPM1 || CPM2
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-
+ obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
+ obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+ obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
++obj-$(CONFIG_I2C_CNS3XXX)	+= i2c-cns3xxx.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ 
+ ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG

target/linux/cns3xxx/patches-3.18/075-spi_support.patch

@@ -0,0 +1,55 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -171,6 +171,13 @@ config SPI_CLPS711X
+ 	  This enables dedicated general purpose SPI/Microwire1-compatible
+ 	  master mode interface (SSI1) for CLPS711X-based CPUs.
+ 
++config SPI_CNS3XXX
++	tristate "CNS3XXX SPI controller"
++	depends on ARCH_CNS3XXX && SPI_MASTER
++	select SPI_BITBANG
++	help
++	  This enables using the CNS3XXX SPI controller in master mode.
++
+ config SPI_COLDFIRE_QSPI
+ 	tristate "Freescale Coldfire QSPI controller"
+ 	depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi-bitban
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
+ obj-$(CONFIG_SPI_CADENCE)		+= spi-cadence.o
+ obj-$(CONFIG_SPI_CLPS711X)		+= spi-clps711x.o
++obj-$(CONFIG_SPI_CNS3XXX)		+= spi-cns3xxx.o
+ obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
+ obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
+ obj-$(CONFIG_SPI_DESIGNWARE)		+= spi-dw.o
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -332,6 +332,10 @@ static int spi_bitbang_transfer_one(stru
+ 			 */
+ 			if (!m->is_dma_mapped)
+ 				t->rx_dma = t->tx_dma = 0;
++
++			t->last_in_message_list =
++				list_is_last(&t->transfer_list, &m->transfers);
++
+ 			status = bitbang->txrx_bufs(spi, t);
+ 		}
+ 		if (status > 0)
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -628,6 +628,13 @@ struct spi_transfer {
+ 	u32		speed_hz;
+ 
+ 	struct list_head transfer_list;
++
++#ifdef CONFIG_ARCH_CNS3XXX
++	unsigned	last_in_message_list;
++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
++	u8	dio_read;
++#endif
++#endif
+ };
+ 
+ /**

target/linux/cns3xxx/patches-3.18/080-sata_support.patch

@@ -0,0 +1,26 @@
+--- a/drivers/ata/ahci_platform.c
++++ b/drivers/ata/ahci_platform.c
+@@ -29,12 +29,23 @@ static const struct ata_port_info ahci_p
+ 	.port_ops	= &ahci_platform_ops,
+ };
+ 
++static const struct ata_port_info cns3xxx_port_info = {
++	.flags		= AHCI_FLAG_COMMON,
++	.pio_mask	= ATA_PIO4,
++	.udma_mask	= ATA_UDMA6,
++	.port_ops	= &ahci_pmp_retry_srst_ops,
++};
++
+ static int ahci_probe(struct platform_device *pdev)
+ {
+ 	struct device *dev = &pdev->dev;
+ 	struct ahci_host_priv *hpriv;
++	const struct ata_port_info *info = &ahci_port_info;
+ 	int rc;
+ 
++	if (IS_ENABLED(CONFIG_ARCH_CNS3XXX))
++		info = &cns3xxx_port_info;
++
+ 	hpriv = ahci_platform_get_resources(pdev);
+ 	if (IS_ERR(hpriv))
+ 		return PTR_ERR(hpriv);

target/linux/cns3xxx/patches-3.18/085-ethernet_support.patch

@@ -0,0 +1,20 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -34,6 +34,7 @@ source "drivers/net/ethernet/adi/Kconfig
+ source "drivers/net/ethernet/broadcom/Kconfig"
+ source "drivers/net/ethernet/brocade/Kconfig"
+ source "drivers/net/ethernet/calxeda/Kconfig"
++source "drivers/net/ethernet/cavium/Kconfig"
+ source "drivers/net/ethernet/chelsio/Kconfig"
+ source "drivers/net/ethernet/cirrus/Kconfig"
+ source "drivers/net/ethernet/cisco/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_BFIN) += adi/
+ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
+ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
+ obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/
++obj-$(CONFIG_NET_VENDOR_CAVIUM) += cavium/
+ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+ obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
+ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/

target/linux/cns3xxx/patches-3.18/090-timers.patch

@@ -0,0 +1,104 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -135,12 +135,13 @@ static void cns3xxx_timer_set_mode(enum 
+ 
+ 	switch (mode) {
+ 	case CLOCK_EVT_MODE_PERIODIC:
+-		reload = pclk * 20 / (3 * HZ) * 0x25000;
++		reload = pclk * 1000000 / HZ;
+ 		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+ 		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
+ 		break;
+ 	case CLOCK_EVT_MODE_ONESHOT:
+ 		/* period set, and timer enabled in 'next_event' hook */
++		writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+ 		ctrl |= (1 << 2) | (1 << 9);
+ 		break;
+ 	case CLOCK_EVT_MODE_UNUSED:
+@@ -168,7 +169,7 @@ static struct clock_event_device cns3xxx
+ 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ 	.set_mode	= cns3xxx_timer_set_mode,
+ 	.set_next_event	= cns3xxx_timer_set_next_event,
+-	.rating		= 350,
++	.rating		= 300,
+ 	.cpumask	= cpu_all_mask,
+ };
+ 
+@@ -215,6 +216,35 @@ static void __init cns3xxx_init_twd(void
+ #endif
+ }
+ 
++static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
++{
++  u64 val;
++
++  val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
++  val &= 0xffff;
++
++  return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET));
++}
++
++static struct clocksource clocksource_cns3xxx = {
++	.name = "freerun",
++	.rating = 200,
++	.read = cns3xxx_get_cycles,
++	.mask = CLOCKSOURCE_MASK(48),
++	.shift  = 16,
++	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++static void __init cns3xxx_clocksource_init(void)
++{
++	/* Reset the FreeRunning counter */
++	writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
++
++	clocksource_cns3xxx.mult =
++		clocksource_khz2mult(100, clocksource_cns3xxx.shift);
++	clocksource_register(&clocksource_cns3xxx);
++}
++
+ /*
+  * Set up the clock source and clock events devices
+  */
+@@ -232,13 +262,12 @@ static void __init __cns3xxx_timer_init(
+ 	/* stop free running timer3 */
+ 	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
+ 
+-	/* timer1 */
+-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
+-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+-
+ 	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
+ 	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
+ 
++	val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
++	writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
++
+ 	/* mask irq, non-mask timer1 overflow */
+ 	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+ 	irq_mask &= ~(1 << 2);
+@@ -250,23 +279,9 @@ static void __init __cns3xxx_timer_init(
+ 	val |= (1 << 9);
+ 	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+ 
+-	/* timer2 */
+-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
+-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
+-
+-	/* mask irq */
+-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+-	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
+-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+-
+-	/* down counter */
+-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+-	val |= (1 << 10);
+-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+-
+-	/* Make irqs happen for the system timer */
+ 	setup_irq(timer_irq, &cns3xxx_timer_irq);
+ 
++	cns3xxx_clocksource_init();
+ 	cns3xxx_clockevents_init(timer_irq);
+ 	cns3xxx_init_twd();
+ }

target/linux/cns3xxx/patches-3.18/095-gpio_support.patch

@@ -0,0 +1,67 @@
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -245,6 +245,10 @@ static void __init cns3420_init(void)
+ 
+ 	cns3xxx_ahci_init();
+ 	cns3xxx_sdhci_init();
++	cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
++		NR_IRQS_CNS3XXX);
++	cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
++		NR_IRQS_CNS3XXX + 32);
+ 
+ 	pm_power_off = cns3xxx_power_off;
+ }
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -1,6 +1,8 @@
+ menuconfig ARCH_CNS3XXX
+ 	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+ 	select ARM_GIC
++	select ARCH_REQUIRE_GPIOLIB
++	select GENERIC_IRQ_CHIP
+ 	select PCI_DOMAINS if PCI
+ 	select HAVE_ARM_SCU if SMP
+ 	select HAVE_ARM_TWD if LOCAL_TIMERS
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -1,7 +1,7 @@
+ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+ 
+ obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
+-cns3xxx-y				+= core.o pm.o
++cns3xxx-y				+= core.o pm.o gpio.o
+ cns3xxx-$(CONFIG_ATAGS)			+= devices.o
+ cns3xxx-$(CONFIG_PCI)			+= pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
+--- a/arch/arm/mach-cns3xxx/cns3xxx.h
++++ b/arch/arm/mach-cns3xxx/cns3xxx.h
+@@ -68,8 +68,10 @@
+ #define SMC_PCELL_ID_3_OFFSET			0xFFC
+ 
+ #define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
++#define CNS3XXX_GPIOA_BASE_VIRT			0xFB006000
+ 
+ #define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
++#define CNS3XXX_GPIOB_BASE_VIRT			0xFB007000
+ 
+ #define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
+ 
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[]
+ 		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
+ 		.length		= SZ_4K,
+ 		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
+ #ifdef CONFIG_PCI
+ 	}, {
+ 		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,

target/linux/cns3xxx/patches-3.18/097-l2x0_cmdline_disable.patch

@@ -0,0 +1,69 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -305,13 +305,26 @@ void __init cns3xxx_timer_init(void)
+ 
+ #ifdef CONFIG_CACHE_L2X0
+ 
+-void __init cns3xxx_l2x0_init(void)
++static int cns3xxx_l2x0_enable = 1;
++
++static int __init cns3xxx_l2x0_disable(char *s)
++{
++	cns3xxx_l2x0_enable = 0;
++	return 1;
++}
++__setup("nol2x0", cns3xxx_l2x0_disable);
++
++static int __init cns3xxx_l2x0_init(void)
+ {
+-	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
++	void __iomem *base;
+ 	u32 val;
+ 
++	if (!cns3xxx_l2x0_enable)
++		return 0;
++
++	base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+ 	if (WARN_ON(!base))
+-		return;
++		return 0;
+ 
+ 	/*
+ 	 * Tag RAM Control register
+@@ -341,7 +354,10 @@ void __init cns3xxx_l2x0_init(void)
+ 
+ 	/* 32 KiB, 8-way, parity disable */
+ 	l2x0_init(base, 0x00500000, 0xfe0f0fff);
++
++	return 0;
+ }
++arch_initcall(cns3xxx_l2x0_init);
+ 
+ #endif /* CONFIG_CACHE_L2X0 */
+ 
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -239,8 +239,6 @@ static struct platform_device *cns3420_p
+ 
+ static void __init cns3420_init(void)
+ {
+-	cns3xxx_l2x0_init();
+-
+ 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
+ 
+ 	cns3xxx_ahci_init();
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -16,12 +16,6 @@
+ extern struct smp_operations cns3xxx_smp_ops;
+ extern void cns3xxx_timer_init(void);
+ 
+-#ifdef CONFIG_CACHE_L2X0
+-void __init cns3xxx_l2x0_init(void);
+-#else
+-static inline void cns3xxx_l2x0_init(void) {}
+-#endif /* CONFIG_CACHE_L2X0 */
+-
+ #ifdef CONFIG_PCI
+ extern void __init cns3xxx_pcie_init_late(void);
+ #else

target/linux/cns3xxx/patches-3.18/100-laguna_support.patch

@@ -0,0 +1,46 @@
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -22,4 +22,12 @@ config MACH_CNS3420VB
+ 	  This is a platform with an on-board ARM11 MPCore and has support
+ 	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+ 
++config MACH_GW2388
++	bool "Support for Gateworks Laguna Platform"
++	help
++	  Include support for the Gateworks Laguna Platform
++
++	  This is a platform with an on-board ARM11 MPCore and has support
++	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc.
++
+ endif
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI)			+= pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
+ cns3xxx-$(CONFIG_SMP)			+= platsmp.o headsmp.o cns3xxx_fiq.o
+ cns3xxx-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
++cns3xxx-$(CONFIG_MACH_GW2388)		+= laguna.o
++
+--- a/arch/arm/mach-cns3xxx/devices.c
++++ b/arch/arm/mach-cns3xxx/devices.c
+@@ -16,6 +16,7 @@
+ #include <linux/compiler.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
++#include <asm/mach-types.h>
+ #include "cns3xxx.h"
+ #include "pm.h"
+ #include "core.h"
+@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void)
+ 	u32 gpioa_pins = __raw_readl(gpioa);
+ 
+ 	/* MMC/SD pins share with GPIOA */
+-	gpioa_pins |= 0x1fff0004;
++	if (machine_is_gw2388()) {
++		gpioa_pins |= 0x1fff0000;
++	} else {
++		gpioa_pins |= 0x1fff0004;
++	}
+ 	__raw_writel(gpioa_pins, gpioa);
+ 
+ 	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));

target/linux/cns3xxx/patches-3.18/101-laguna_sdhci_card_detect.patch

@@ -0,0 +1,14 @@
+--- a/drivers/mmc/host/sdhci-cns3xxx.c
++++ b/drivers/mmc/host/sdhci-cns3xxx.c
+@@ -88,9 +88,9 @@ static const struct sdhci_pltfm_data sdh
+ 	.ops = &sdhci_cns3xxx_ops,
+ 	.quirks = SDHCI_QUIRK_BROKEN_DMA |
+ 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+-		  SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+-		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
++		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
++		  SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ };
+ 
+ static int sdhci_cns3xxx_probe(struct platform_device *pdev)

target/linux/cns3xxx/patches-3.18/110-pci_isolated_interrupts.patch

@@ -0,0 +1,188 @@
+--- a/arch/arm/mach-cns3xxx/laguna.c
++++ b/arch/arm/mach-cns3xxx/laguna.c
+@@ -21,6 +21,7 @@
+ #include <linux/kernel.h>
+ #include <linux/compiler.h>
+ #include <linux/io.h>
++#include <linux/irq.h>
+ #include <linux/gpio.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/serial_core.h>
+@@ -872,6 +873,47 @@ static int laguna_register_gpio(struct g
+ 	return ret;
+ }
+ 
++/* allow disabling of external isolated PCIe IRQs */
++static int cns3xxx_pciextirq = 1;
++static int __init cns3xxx_pciextirq_disable(char *s)
++{
++      cns3xxx_pciextirq = 0;
++      return 1;
++}
++__setup("noextirq", cns3xxx_pciextirq_disable);
++
++static int __init laguna_pcie_init_irq(void)
++{
++	u32 __iomem *mem = (void __iomem *)(CNS3XXX_GPIOB_BASE_VIRT + 0x0004);
++	u32 reg = (__raw_readl(mem) >> 26) & 0xf;
++	int irqs[] = {
++		IRQ_CNS3XXX_EXTERNAL_PIN0,
++		IRQ_CNS3XXX_EXTERNAL_PIN1,
++		IRQ_CNS3XXX_EXTERNAL_PIN2,
++		154,
++	};
++
++	if (!machine_is_gw2388())
++		return 0;
++
++	/* Verify GPIOB[26:29] == 0001b indicating support for ext irqs */
++	if (cns3xxx_pciextirq && reg != 1)
++		cns3xxx_pciextirq = 0;
++
++	if (cns3xxx_pciextirq) {
++		printk("laguna: using isolated PCI interrupts:"
++		       " irq%d/irq%d/irq%d/irq%d\n",
++		       irqs[0], irqs[1], irqs[2], irqs[3]);
++		cns3xxx_pcie_set_irqs(0, irqs);
++	} else {
++		printk("laguna: using shared PCI interrupts: irq%d\n",
++		       IRQ_CNS3XXX_PCIE0_DEVICE);
++	}
++
++	return 0;
++}
++subsys_initcall(laguna_pcie_init_irq);
++
+ static int __init laguna_model_setup(void)
+ {
+ 	u32 __iomem *mem;
+@@ -883,8 +925,33 @@ static int __init laguna_model_setup(voi
+ 	printk("Running on Gateworks Laguna %s\n", laguna_info.model);
+ 	cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
+ 		NR_IRQS_CNS3XXX);
+-	cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
+-		NR_IRQS_CNS3XXX + 32);
++
++	/*
++	 * If pcie external interrupts are supported and desired
++	 * configure IRQ types and configure pin function.
++	 * Note that cns3xxx_pciextirq is enabled by default, but can be
++	 * unset via the 'noextirq' kernel param or by laguna_pcie_init() if
++	 * the baseboard model does not support this hardware feature.
++	 */
++	if (cns3xxx_pciextirq) {
++		mem = (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0018);
++		reg = __raw_readl(mem);
++		/* GPIO26 is gpio, EXT_INT[0:2] not gpio func */
++		reg &= ~0x3c000000;
++		reg |= 0x38000000;
++		__raw_writel(reg, mem);
++
++		cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT,
++				  IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32);
++
++		irq_set_irq_type(154, IRQ_TYPE_LEVEL_LOW);
++		irq_set_irq_type(93, IRQ_TYPE_LEVEL_HIGH);
++		irq_set_irq_type(94, IRQ_TYPE_LEVEL_HIGH);
++		irq_set_irq_type(95, IRQ_TYPE_LEVEL_HIGH);
++	} else {
++		cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT,
++				  IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32);
++	}
+ 
+ 	if (strncmp(laguna_info.model, "GW", 2) == 0) {
+ 		if (laguna_info.config_bitmap & ETH0_LOAD)
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -18,6 +18,7 @@
+ #include <linux/io.h>
+ #include <linux/ioport.h>
+ #include <linux/interrupt.h>
++#include <linux/irq.h>
+ #include <linux/ptrace.h>
+ #include <asm/mach/map.h>
+ #include "cns3xxx.h"
+@@ -27,7 +28,7 @@ struct cns3xxx_pcie {
+ 	void __iomem *host_regs; /* PCI config registers for host bridge */
+ 	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
+ 	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
+-	unsigned int irqs[2];
++	unsigned int irqs[5];
+ 	struct resource res_io;
+ 	struct resource res_mem;
+ 	struct hw_pci hw_pci;
+@@ -97,7 +98,7 @@ static inline int check_master_abort(str
+ 		void __iomem *host_base;
+ 		u32 sreg, ereg;
+ 
+-		host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
++		host_base = (void __iomem *) cnspci->host_regs;
+ 		sreg = __raw_readw(host_base + 0x6) & 0xF900;
+ 		ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
+ 
+@@ -251,7 +252,7 @@ static struct pci_ops cns3xxx_pcie_ops =
+ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ {
+ 	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
+-	int irq = cnspci->irqs[!!dev->bus->number];
++	int irq = cnspci->irqs[!!dev->bus->number + pin - 1];
+ 
+ 	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
+ 		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
+@@ -277,7 +278,12 @@ static struct cns3xxx_pcie cns3xxx_pcie[
+ 			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
+ 			.flags = IORESOURCE_MEM,
+ 		},
+-		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
++		.irqs = { IRQ_CNS3XXX_PCIE0_RC,
++			  IRQ_CNS3XXX_PCIE0_DEVICE,
++			  IRQ_CNS3XXX_PCIE0_DEVICE,
++			  IRQ_CNS3XXX_PCIE0_DEVICE,
++			  IRQ_CNS3XXX_PCIE0_DEVICE,
++			},
+ 		.hw_pci = {
+ 			.domain = 0,
+ 			.nr_controllers = 1,
+@@ -302,7 +308,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
+ 			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
+ 			.flags = IORESOURCE_MEM,
+ 		},
+-		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
++		.irqs = {
++			IRQ_CNS3XXX_PCIE1_RC,
++			IRQ_CNS3XXX_PCIE1_DEVICE,
++			IRQ_CNS3XXX_PCIE1_DEVICE,
++			IRQ_CNS3XXX_PCIE1_DEVICE,
++			IRQ_CNS3XXX_PCIE1_DEVICE,
++		},
+ 		.hw_pci = {
+ 			.domain = 1,
+ 			.nr_controllers = 1,
+@@ -412,6 +424,14 @@ static int cns3xxx_pcie_abort_handler(un
+ 	return 0;
+ }
+ 
++void __init cns3xxx_pcie_set_irqs(int bus, int *irqs)
++{
++	int i;
++
++	for (i = 0; i < 4; i++)
++		cns3xxx_pcie[bus].irqs[i + 1] = irqs[i];
++}
++
+ void __init cns3xxx_pcie_init_late(void)
+ {
+ 	int i;
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -18,8 +18,10 @@ extern void cns3xxx_timer_init(void);
+ 
+ #ifdef CONFIG_PCI
+ extern void __init cns3xxx_pcie_init_late(void);
++extern void __init cns3xxx_pcie_set_irqs(int bus, int *irqs);
+ #else
+ static inline void __init cns3xxx_pcie_init_late(void) {}
++static inline void cns3xxx_pcie_set_irqs(int bus, int *irqs) {}
+ #endif
+ 
+ void __init cns3xxx_map_io(void);

target/linux/cns3xxx/patches-3.18/200-broadcom_phy_reinit.patch

@@ -0,0 +1,14 @@
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -393,6 +393,11 @@ static int bcm5481_config_aneg(struct ph
+ 		/* Write bits 14:0. */
+ 		reg |= (1 << 15);
+ 		phy_write(phydev, 0x18, reg);
++	} else {
++		phy_write(phydev, 0x18, 0xf1e7);
++		phy_write(phydev, 0x1c, 0x8e00);
++
++		phy_write(phydev, 0x1c, 0xa41f);
+ 	}
+ 
+ 	return ret;

target/linux/cns3xxx/patches-3.18/210-dwc2_defaults.patch

@@ -0,0 +1,47 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -105,6 +105,34 @@ static const struct dwc2_core_params par
+ 	.uframe_sched			= -1,
+ };
+ 
++static const struct dwc2_core_params params_cns3xxx = {
++	.otg_cap			= 2,	/* non-HNP/non-SRP capable */
++	.otg_ver			= 0,	/* 1.3 */
++	.dma_enable			= 1,
++	.dma_desc_enable		= 0,
++	.speed				= 0,	/* High Speed */
++	.enable_dynamic_fifo		= 1,
++	.en_multiple_tx_fifo		= 1,
++	.host_rx_fifo_size		= 658,	/* 774 DWORDs */
++	.host_nperio_tx_fifo_size	= 128,	/* 256 DWORDs */
++	.host_perio_tx_fifo_size	= 658,	/* 512 DWORDs */
++	.max_transfer_size		= 65535,
++	.max_packet_count		= 511,
++	.host_channels			= 16,
++	.phy_type			= 1,	/* UTMI */
++	.phy_utmi_width			= 16,	/* 8 bits */
++	.phy_ulpi_ddr			= 0,	/* Single */
++	.phy_ulpi_ext_vbus		= 0,
++	.i2c_enable			= 0,
++	.ulpi_fs_ls			= 0,
++	.host_support_fs_ls_low_power	= 0,
++	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
++	.ts_dline			= 0,
++	.reload_ctl			= 0,
++	.ahbcfg				= 0x10,
++	.uframe_sched			= 0,
++};
++
+ /**
+  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+  * DWC_otg driver
+@@ -165,6 +193,9 @@ static int dwc2_driver_probe(struct plat
+ 		/* Default all params to autodetect */
+ 		dwc2_set_all_params(&defparams, -1);
+ 		params = &defparams;
++#ifdef CONFIG_ARCH_CNS3XXX
++		params = &params_cns3xxx;
++#endif
+ 
+ 		/*
+ 		 * Disable descriptor dma mode by default as the HW can support