hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431) 

SVN-Revision: 45897
owl
John Crispin 2015-06-05 14:11:36 +00:00
parent 9e233fb241
commit ca1db6b5ce
8 changed files with 388 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View File

@ -46,4 +46,15 @@ case "$FIRMWARE" in
;;
esac
;;
"RT3062.eeprom" )
local board=$(lantiq_board_name)
case $board in
VGV7510KW22)
rt2x00_eeprom_extract "board_config" 520 256 1
;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
;;
esac
;;
esac

7
target/linux/lantiq/base-files/etc/uci-defaults/01_leds
View File

@ -30,6 +30,13 @@ BTHOMEHUBV3A)
ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
;;
VGV7510KW22)
ucidef_set_led_default "power" "power" "power" "1"
ucidef_set_led_default "power2" "power2" "power2" "0"
ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0radio"
ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
;;
VGV7519)
ucidef_set_led_default "power" "power" "power" "0"
ucidef_set_led_default "power2" "power2" "power2" "1"

8
target/linux/lantiq/base-files/etc/uci-defaults/02_network
View File

@ -174,6 +174,14 @@ VGV7519)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
VGV7510KW22)
lan_mac=$(mtd_get_mac_binary board_config 22)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0.1'
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6t"
;;
esac
[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"

256
target/linux/lantiq/dts/VGV7510KW22.dtsi Normal file
View File

@ -0,0 +1,256 @@
/include/ "vr9.dtsi"
/ {
model = "VGV7510KW22 - o2 Box 6431";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
boardconfig: partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ip101a-rst {
lantiq,pins = "io46";
lantiq,output = <0>;
lantiq,pull = <1>;
};
gphy-leds {
lantiq,groups = "gphy0 led1",
"gphy1 led0", "gphy1 led1";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci-rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
spi {
lantiq,groups = "spi";
lantiq,function = "spi";
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy12>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy12: ethernet-phy@12 {
reg = <0x12>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xff>;
lantiq,groups = <0x1>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x7>;
lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 47 0>;
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
pcie@d900000 {
status = "disabled";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT3062.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio 9 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl {
label = "dsl";
gpios = <&gpio 2 1>;
};
internet_red {
label = "internet_red";
gpios = <&gpio 10 1>;
};
info_red {
label = "info_red";
gpios = <&gpio 12 1>;
};
power {
label = "power"; /* green */
gpios = <&gpio 14 1>;
};
info_green {
label = "info_green";
gpios = <&gpio 15 1>;
};
internet_green {
label = "internet_green";
gpios = <&gpio 19 1>;
};
wifi {
label = "wifi";
gpios = <&gpio 20 1>;
};
power2 {
label = "power2"; /* red */
gpios = <&gpio 28 1>;
};
phone_red {
label = "phone_red";
gpios = <&gpio 29 1>;
};
};
};

53
target/linux/lantiq/dts/VGV7510KW22BRN.dts Normal file
View File

@ -0,0 +1,53 @@
/dts-v1/;
/include/ "VGV7510KW22.dtsi"
/ {
fpi@10000000 {
localbus@0 {
nor-boot@0 {
partition@0 {
label = "Boot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "Configuration";
reg = <0x40000 0x40000>;
read-only;
};
partition@80000 {
label = "Certificate";
reg = <0x80000 0x20000>;
read-only;
};
partition@a0000 {
label = "Special_Area";
reg = <0xa0000 0x20000>;
read-only;
};
partition@c0000 {
label = "Primary_Setting";
reg = <0xc0000 0x20000>;
read-only;
};
partition@e0000 {
label = "firmware"; /* "Code Image 0" in OFW */
reg = <0xe0000 0x780000>;
read-only;
};
partition@860000 {
label = "Code_Image_1";
reg = <0x860000 0x780000>;
read-only;
};
};
};
};
};

33
target/linux/lantiq/dts/VGV7510KW22NOR.dts Normal file
View File

@ -0,0 +1,33 @@
/dts-v1/;
/include/ "VGV7510KW22.dtsi"
/ {
fpi@10000000 {
localbus@0 {
nor-boot@0 {
partition@0 {
label = "uboot";
reg = <0x0 0x60000>; /* 384 KiB */
read-only;
};
partition@60000 {
label = "uboot-env";
reg = <0x60000 0x20000>; /* 128 KiB */
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0xe60000>; /* 14720 KiB */
};
partition@1e80000 {
label = "dsl_fw";
reg = <0xee0000 0x100000>; /* 1024 KiB */
};
};
};
};
};

6
target/linux/lantiq/image/Makefile
View File

@ -432,6 +432,12 @@ Image/Build/Profile/VG3503J_V2=$(call Image/BuildLoader/$(1),$(1),VG3503J_V2)
Image/BuildKernel/Profile/TDW8970=$(call Image/BuildKernelTPLink/Template,TDW8970,TD-W8970v1,$(1))
Image/Build/Profile/TDW8970=$(call Image/BuildTPLink/$(1),$(1),TDW8970,TD-W8970v1)
Image/BuildKernel/Profile/VGV7510KW22NOR=$(call Image/BuildKernel/Template,VGV7510KW22NOR,$(1))
Image/Build/Profile/VGV7510KW22NOR=$(call Image/Build/$(1),$(1),VGV7510KW22NOR)
Image/BuildKernel/Profile/VGV7510KW22BRN=$(call Image/BuildKernel/Template,VGV7510KW22BRN,$(1))
Image/Build/Profile/VGV7510KW22BRN=$(call Image/Build/$(1),$(1),VGV7510KW22BRN,5BRNDA6431,0x12345678,0x04c11db7,$(1))
Image/BuildKernel/Profile/VGV7519NOR=$(call Image/BuildKernel/Template,VGV7519NOR,$(1))
Image/Build/Profile/VGV7519NOR=$(call Image/Build/$(1),$(1),VGV7519NOR)

14
target/linux/lantiq/xrx200/profiles/arv.mk
View File

@ -10,6 +10,20 @@ endef
$(eval $(call Profile,VG3503J_V2))
define Profile/VGV7510KW22NOR
NAME:=o2 Box 6431 / Arcadyan VGV7510KW22 (NOR)
PACKAGES:=kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
$(eval $(call Profile,VGV7510KW22NOR))
define Profile/VGV7510KW22BRN
NAME:=o2 Box 6431 / Arcadyan VGV7510KW22 (BRN)
PACKAGES:=kmod-rt2800-pci wpad-mini kmod-usb-dwc2
endef
$(eval $(call Profile,VGV7510KW22BRN))
define Profile/VGV7519NOR
NAME:=Experiabox 8 VGV7519
PACKAGES:=kmod-rt2800-pci wpad-mini kmod-usb-dwc2