mirror of https://github.com/hak5/openwrt-owl.git
Gabor Juhos
parent
9d1109bd84
commit
c5fb8c2c05
|
|
@ -0,0 +1,85 @@
|
|||
From 1306e6b6d72b2bc0b91bcdd15b1d982965210bda Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Mon, 5 Jan 2009 10:57:42 +0100
|
||||
Subject: [PATCH 03/11] ath9k: introduce bus specific cache size routine
|
||||
|
||||
The PCI specific bus_read_cachesize routine won't work on the AHB bus,
|
||||
we have to replace it with a suitable one later.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
---
|
||||
drivers/net/wireless/ath9k/core.h | 10 ++++++++++
|
||||
drivers/net/wireless/ath9k/main.c | 9 +++++++--
|
||||
2 files changed, 17 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/drivers/net/wireless/ath9k/core.h
|
||||
+++ b/drivers/net/wireless/ath9k/core.h
|
||||
@@ -693,6 +693,10 @@ enum PROT_MODE {
|
||||
#define SC_OP_RFKILL_SW_BLOCKED BIT(12)
|
||||
#define SC_OP_RFKILL_HW_BLOCKED BIT(13)
|
||||
|
||||
+struct ath_bus_ops {
|
||||
+ void (*read_cachesize)(struct ath_softc *sc, int *csz);
|
||||
+};
|
||||
+
|
||||
struct ath_softc {
|
||||
struct ieee80211_hw *hw;
|
||||
struct device *dev;
|
||||
@@ -743,6 +747,7 @@ struct ath_softc {
|
||||
#ifdef CONFIG_ATH9K_DEBUG
|
||||
struct ath9k_debug sc_debug;
|
||||
#endif
|
||||
+ struct ath_bus_ops *bus_ops;
|
||||
};
|
||||
|
||||
int ath_reset(struct ath_softc *sc, bool retry_tx);
|
||||
@@ -750,4 +755,9 @@ int ath_get_hal_qnum(u16 queue, struct a
|
||||
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
|
||||
int ath_cabq_update(struct ath_softc *);
|
||||
|
||||
+static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
|
||||
+{
|
||||
+ sc->bus_ops->read_cachesize(sc, csz);
|
||||
+}
|
||||
+
|
||||
#endif /* CORE_H */
|
||||
--- a/drivers/net/wireless/ath9k/main.c
|
||||
+++ b/drivers/net/wireless/ath9k/main.c
|
||||
@@ -42,7 +42,7 @@ static void ath_detach(struct ath_softc
|
||||
|
||||
/* return bus cachesize in 4B word units */
|
||||
|
||||
-static void bus_read_cachesize(struct ath_softc *sc, int *csz)
|
||||
+static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
|
||||
{
|
||||
u8 u8tmp;
|
||||
|
||||
@@ -1338,7 +1338,7 @@ static int ath_init(u16 devid, struct at
|
||||
* Cache line size is used to size and align various
|
||||
* structures used to communicate with the hardware.
|
||||
*/
|
||||
- bus_read_cachesize(sc, &csz);
|
||||
+ ath_read_cachesize(sc, &csz);
|
||||
/* XXX assert csz is non-zero */
|
||||
sc->sc_cachelsz = csz << 2; /* convert to bytes */
|
||||
|
||||
@@ -2529,6 +2529,10 @@ ath_rf_name(u16 rf_version)
|
||||
return "????";
|
||||
}
|
||||
|
||||
+static struct ath_bus_ops ath_pci_bus_ops = {
|
||||
+ .read_cachesize = ath_pci_read_cachesize,
|
||||
+};
|
||||
+
|
||||
static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||||
{
|
||||
void __iomem *mem;
|
||||
@@ -2617,6 +2621,7 @@ static int ath_pci_probe(struct pci_dev
|
||||
sc->hw = hw;
|
||||
sc->dev = &pdev->dev;
|
||||
sc->mem = mem;
|
||||
+ sc->bus_ops = &ath_pci_bus_ops;
|
||||
|
||||
if (ath_attach(id->device, sc) != 0) {
|
||||
ret = -ENODEV;
|
||||
|
|
@ -0,0 +1,90 @@
|
|||
From 4167fb37cceda6a5ebfbfc4431abc69a1857ce43 Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Mon, 5 Jan 2009 10:59:29 +0100
|
||||
Subject: [PATCH 04/11] ath9k: introduce bus specific cleanup routine
|
||||
|
||||
We have left only some PCI specific cleanup code. We have to convert
|
||||
them as well.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
---
|
||||
drivers/net/wireless/ath9k/core.h | 6 ++++++
|
||||
drivers/net/wireless/ath9k/main.c | 30 ++++++++++++++++--------------
|
||||
2 files changed, 22 insertions(+), 14 deletions(-)
|
||||
|
||||
--- a/drivers/net/wireless/ath9k/core.h
|
||||
+++ b/drivers/net/wireless/ath9k/core.h
|
||||
@@ -695,6 +695,7 @@ enum PROT_MODE {
|
||||
|
||||
struct ath_bus_ops {
|
||||
void (*read_cachesize)(struct ath_softc *sc, int *csz);
|
||||
+ void (*cleanup)(struct ath_softc *sc);
|
||||
};
|
||||
|
||||
struct ath_softc {
|
||||
@@ -760,4 +761,9 @@ static inline void ath_read_cachesize(st
|
||||
sc->bus_ops->read_cachesize(sc, csz);
|
||||
}
|
||||
|
||||
+static inline void ath_bus_cleanup(struct ath_softc *sc)
|
||||
+{
|
||||
+ sc->bus_ops->cleanup(sc);
|
||||
+}
|
||||
+
|
||||
#endif /* CORE_H */
|
||||
--- a/drivers/net/wireless/ath9k/main.c
|
||||
+++ b/drivers/net/wireless/ath9k/main.c
|
||||
@@ -1267,13 +1267,7 @@ static int ath_start_rfkill_poll(struct
|
||||
rfkill_free(sc->rf_kill.rfkill);
|
||||
|
||||
/* Deinitialize the device */
|
||||
- ath_detach(sc);
|
||||
- if (to_pci_dev(sc->dev)->irq)
|
||||
- free_irq(to_pci_dev(sc->dev)->irq, sc);
|
||||
- pci_iounmap(to_pci_dev(sc->dev), sc->mem);
|
||||
- pci_release_region(to_pci_dev(sc->dev), 0);
|
||||
- pci_disable_device(to_pci_dev(sc->dev));
|
||||
- ieee80211_free_hw(sc->hw);
|
||||
+ ath_bus_cleanup(sc);
|
||||
return -EIO;
|
||||
} else {
|
||||
sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
|
||||
@@ -2529,8 +2523,22 @@ ath_rf_name(u16 rf_version)
|
||||
return "????";
|
||||
}
|
||||
|
||||
+static void ath_pci_cleanup(struct ath_softc *sc)
|
||||
+{
|
||||
+ struct pci_dev *pdev = to_pci_dev(sc->dev);
|
||||
+
|
||||
+ ath_detach(sc);
|
||||
+ if (pdev->irq)
|
||||
+ free_irq(pdev->irq, sc);
|
||||
+ pci_iounmap(pdev, sc->mem);
|
||||
+ pci_release_region(pdev, 0);
|
||||
+ pci_disable_device(pdev);
|
||||
+ ieee80211_free_hw(sc->hw);
|
||||
+}
|
||||
+
|
||||
static struct ath_bus_ops ath_pci_bus_ops = {
|
||||
.read_cachesize = ath_pci_read_cachesize,
|
||||
+ .cleanup = ath_pci_cleanup,
|
||||
};
|
||||
|
||||
static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||||
@@ -2667,13 +2675,7 @@ static void ath_pci_remove(struct pci_de
|
||||
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
struct ath_softc *sc = hw->priv;
|
||||
|
||||
- ath_detach(sc);
|
||||
- if (pdev->irq)
|
||||
- free_irq(pdev->irq, sc);
|
||||
- pci_iounmap(pdev, sc->mem);
|
||||
- pci_release_region(pdev, 0);
|
||||
- pci_disable_device(pdev);
|
||||
- ieee80211_free_hw(hw);
|
||||
+ ath_pci_cleanup(sc);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
|
@ -0,0 +1,725 @@
|
|||
From d95e670cd1395ffd8410bed809b6d060f2183d6b Mon Sep 17 00:00:00 2001
|
||||
From: Gabor Juhos <juhosg@openwrt.org>
|
||||
Date: Mon, 5 Jan 2009 11:01:09 +0100
|
||||
Subject: [PATCH 05/11] ath9k: move PCI code into separate file
|
||||
|
||||
Now that we have converted all bus specific routines to replaceable, we
|
||||
can move the PCI specific codes into a separate file.
|
||||
|
||||
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||||
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
---
|
||||
drivers/net/wireless/ath9k/Makefile | 1 +
|
||||
drivers/net/wireless/ath9k/core.h | 18 ++-
|
||||
drivers/net/wireless/ath9k/main.c | 299 +++--------------------------------
|
||||
drivers/net/wireless/ath9k/pci.c | 289 +++++++++++++++++++++++++++++++++
|
||||
4 files changed, 328 insertions(+), 279 deletions(-)
|
||||
|
||||
--- a/drivers/net/wireless/ath9k/Makefile
|
||||
+++ b/drivers/net/wireless/ath9k/Makefile
|
||||
@@ -11,6 +11,7 @@ ath9k-y += hw.o \
|
||||
xmit.o \
|
||||
rc.o
|
||||
|
||||
+ath9k-$(CONFIG_PCI) += pci.o
|
||||
ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o
|
||||
|
||||
obj-$(CONFIG_ATH9K) += ath9k.o
|
||||
--- a/drivers/net/wireless/ath9k/core.h
|
||||
+++ b/drivers/net/wireless/ath9k/core.h
|
||||
@@ -18,7 +18,7 @@
|
||||
#define CORE_H
|
||||
|
||||
#include <linux/etherdevice.h>
|
||||
-#include <linux/pci.h>
|
||||
+#include <linux/device.h>
|
||||
#include <net/mac80211.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/rfkill.h>
|
||||
@@ -766,4 +766,20 @@ static inline void ath_bus_cleanup(struc
|
||||
sc->bus_ops->cleanup(sc);
|
||||
}
|
||||
|
||||
+extern struct ieee80211_ops ath9k_ops;
|
||||
+
|
||||
+irqreturn_t ath_isr(int irq, void *dev);
|
||||
+int ath_attach(u16 devid, struct ath_softc *sc);
|
||||
+void ath_detach(struct ath_softc *sc);
|
||||
+const char *ath_mac_bb_name(u32 mac_bb_version);
|
||||
+const char *ath_rf_name(u16 rf_version);
|
||||
+
|
||||
+#ifdef CONFIG_PCI
|
||||
+int ath_pci_init(void);
|
||||
+void ath_pci_exit(void);
|
||||
+#else
|
||||
+static inline int ath_pci_init(void) { return 0; };
|
||||
+static inline void ath_pci_exit(void) {};
|
||||
+#endif
|
||||
+
|
||||
#endif /* CORE_H */
|
||||
--- a/drivers/net/wireless/ath9k/main.c
|
||||
+++ b/drivers/net/wireless/ath9k/main.c
|
||||
@@ -28,38 +28,6 @@ MODULE_DESCRIPTION("Support for Atheros
|
||||
MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
|
||||
MODULE_LICENSE("Dual BSD/GPL");
|
||||
|
||||
-static struct pci_device_id ath_pci_id_table[] __devinitdata = {
|
||||
- { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
|
||||
- { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
|
||||
- { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
|
||||
- { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
|
||||
- { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
|
||||
- { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
|
||||
- { 0 }
|
||||
-};
|
||||
-
|
||||
-static void ath_detach(struct ath_softc *sc);
|
||||
-
|
||||
-/* return bus cachesize in 4B word units */
|
||||
-
|
||||
-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
|
||||
-{
|
||||
- u8 u8tmp;
|
||||
-
|
||||
- pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
|
||||
- (u8 *)&u8tmp);
|
||||
- *csz = (int)u8tmp;
|
||||
-
|
||||
- /*
|
||||
- * This check was put in to avoid "unplesant" consequences if
|
||||
- * the bootrom has not fully initialized all PCI devices.
|
||||
- * Sometimes the cache line size register is not set
|
||||
- */
|
||||
-
|
||||
- if (*csz == 0)
|
||||
- *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
|
||||
-}
|
||||
-
|
||||
static void ath_cache_conf_rate(struct ath_softc *sc,
|
||||
struct ieee80211_conf *conf)
|
||||
{
|
||||
@@ -497,7 +465,7 @@ static void ath9k_tasklet(unsigned long
|
||||
ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
|
||||
}
|
||||
|
||||
-static irqreturn_t ath_isr(int irq, void *dev)
|
||||
+irqreturn_t ath_isr(int irq, void *dev)
|
||||
{
|
||||
struct ath_softc *sc = dev;
|
||||
struct ath_hal *ah = sc->sc_ah;
|
||||
@@ -1278,7 +1246,7 @@ static int ath_start_rfkill_poll(struct
|
||||
}
|
||||
#endif /* CONFIG_RFKILL */
|
||||
|
||||
-static void ath_detach(struct ath_softc *sc)
|
||||
+void ath_detach(struct ath_softc *sc)
|
||||
{
|
||||
struct ieee80211_hw *hw = sc->hw;
|
||||
int i = 0;
|
||||
@@ -1529,7 +1497,7 @@ bad:
|
||||
return error;
|
||||
}
|
||||
|
||||
-static int ath_attach(u16 devid, struct ath_softc *sc)
|
||||
+int ath_attach(u16 devid, struct ath_softc *sc)
|
||||
{
|
||||
struct ieee80211_hw *hw = sc->hw;
|
||||
int error = 0;
|
||||
@@ -2448,7 +2416,7 @@ static int ath9k_ampdu_action(struct iee
|
||||
return ret;
|
||||
}
|
||||
|
||||
-static struct ieee80211_ops ath9k_ops = {
|
||||
+struct ieee80211_ops ath9k_ops = {
|
||||
.tx = ath9k_tx,
|
||||
.start = ath9k_start,
|
||||
.stop = ath9k_stop,
|
||||
@@ -2492,7 +2460,7 @@ static struct {
|
||||
/*
|
||||
* Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
|
||||
*/
|
||||
-static const char *
|
||||
+const char *
|
||||
ath_mac_bb_name(u32 mac_bb_version)
|
||||
{
|
||||
int i;
|
||||
@@ -2509,7 +2477,7 @@ ath_mac_bb_name(u32 mac_bb_version)
|
||||
/*
|
||||
* Return the RF name. "????" is returned if the RF is unknown.
|
||||
*/
|
||||
-static const char *
|
||||
+const char *
|
||||
ath_rf_name(u16 rf_version)
|
||||
{
|
||||
int i;
|
||||
@@ -2523,236 +2491,7 @@ ath_rf_name(u16 rf_version)
|
||||
return "????";
|
||||
}
|
||||
|
||||
-static void ath_pci_cleanup(struct ath_softc *sc)
|
||||
-{
|
||||
- struct pci_dev *pdev = to_pci_dev(sc->dev);
|
||||
-
|
||||
- ath_detach(sc);
|
||||
- if (pdev->irq)
|
||||
- free_irq(pdev->irq, sc);
|
||||
- pci_iounmap(pdev, sc->mem);
|
||||
- pci_release_region(pdev, 0);
|
||||
- pci_disable_device(pdev);
|
||||
- ieee80211_free_hw(sc->hw);
|
||||
-}
|
||||
-
|
||||
-static struct ath_bus_ops ath_pci_bus_ops = {
|
||||
- .read_cachesize = ath_pci_read_cachesize,
|
||||
- .cleanup = ath_pci_cleanup,
|
||||
-};
|
||||
-
|
||||
-static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||||
-{
|
||||
- void __iomem *mem;
|
||||
- struct ath_softc *sc;
|
||||
- struct ieee80211_hw *hw;
|
||||
- u8 csz;
|
||||
- u32 val;
|
||||
- int ret = 0;
|
||||
- struct ath_hal *ah;
|
||||
-
|
||||
- if (pci_enable_device(pdev))
|
||||
- return -EIO;
|
||||
-
|
||||
- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
||||
-
|
||||
- if (ret) {
|
||||
- printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
|
||||
- goto bad;
|
||||
- }
|
||||
-
|
||||
- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
||||
-
|
||||
- if (ret) {
|
||||
- printk(KERN_ERR "ath9k: 32-bit DMA consistent "
|
||||
- "DMA enable failed\n");
|
||||
- goto bad;
|
||||
- }
|
||||
-
|
||||
- /*
|
||||
- * Cache line size is used to size and align various
|
||||
- * structures used to communicate with the hardware.
|
||||
- */
|
||||
- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
||||
- if (csz == 0) {
|
||||
- /*
|
||||
- * Linux 2.4.18 (at least) writes the cache line size
|
||||
- * register as a 16-bit wide register which is wrong.
|
||||
- * We must have this setup properly for rx buffer
|
||||
- * DMA to work so force a reasonable value here if it
|
||||
- * comes up zero.
|
||||
- */
|
||||
- csz = L1_CACHE_BYTES / sizeof(u32);
|
||||
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
||||
- }
|
||||
- /*
|
||||
- * The default setting of latency timer yields poor results,
|
||||
- * set it to the value used by other systems. It may be worth
|
||||
- * tweaking this setting more.
|
||||
- */
|
||||
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
||||
-
|
||||
- pci_set_master(pdev);
|
||||
-
|
||||
- /*
|
||||
- * Disable the RETRY_TIMEOUT register (0x41) to keep
|
||||
- * PCI Tx retries from interfering with C3 CPU state.
|
||||
- */
|
||||
- pci_read_config_dword(pdev, 0x40, &val);
|
||||
- if ((val & 0x0000ff00) != 0)
|
||||
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
||||
-
|
||||
- ret = pci_request_region(pdev, 0, "ath9k");
|
||||
- if (ret) {
|
||||
- dev_err(&pdev->dev, "PCI memory region reserve error\n");
|
||||
- ret = -ENODEV;
|
||||
- goto bad;
|
||||
- }
|
||||
-
|
||||
- mem = pci_iomap(pdev, 0, 0);
|
||||
- if (!mem) {
|
||||
- printk(KERN_ERR "PCI memory map error\n") ;
|
||||
- ret = -EIO;
|
||||
- goto bad1;
|
||||
- }
|
||||
-
|
||||
- hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
|
||||
- if (hw == NULL) {
|
||||
- printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
|
||||
- goto bad2;
|
||||
- }
|
||||
-
|
||||
- SET_IEEE80211_DEV(hw, &pdev->dev);
|
||||
- pci_set_drvdata(pdev, hw);
|
||||
-
|
||||
- sc = hw->priv;
|
||||
- sc->hw = hw;
|
||||
- sc->dev = &pdev->dev;
|
||||
- sc->mem = mem;
|
||||
- sc->bus_ops = &ath_pci_bus_ops;
|
||||
-
|
||||
- if (ath_attach(id->device, sc) != 0) {
|
||||
- ret = -ENODEV;
|
||||
- goto bad3;
|
||||
- }
|
||||
-
|
||||
- /* setup interrupt service routine */
|
||||
-
|
||||
- if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
|
||||
- printk(KERN_ERR "%s: request_irq failed\n",
|
||||
- wiphy_name(hw->wiphy));
|
||||
- ret = -EIO;
|
||||
- goto bad4;
|
||||
- }
|
||||
-
|
||||
- ah = sc->sc_ah;
|
||||
- printk(KERN_INFO
|
||||
- "%s: Atheros AR%s MAC/BB Rev:%x "
|
||||
- "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
|
||||
- wiphy_name(hw->wiphy),
|
||||
- ath_mac_bb_name(ah->ah_macVersion),
|
||||
- ah->ah_macRev,
|
||||
- ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
|
||||
- ah->ah_phyRev,
|
||||
- (unsigned long)mem, pdev->irq);
|
||||
-
|
||||
- return 0;
|
||||
-bad4:
|
||||
- ath_detach(sc);
|
||||
-bad3:
|
||||
- ieee80211_free_hw(hw);
|
||||
-bad2:
|
||||
- pci_iounmap(pdev, mem);
|
||||
-bad1:
|
||||
- pci_release_region(pdev, 0);
|
||||
-bad:
|
||||
- pci_disable_device(pdev);
|
||||
- return ret;
|
||||
-}
|
||||
-
|
||||
-static void ath_pci_remove(struct pci_dev *pdev)
|
||||
-{
|
||||
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
- struct ath_softc *sc = hw->priv;
|
||||
-
|
||||
- ath_pci_cleanup(sc);
|
||||
-}
|
||||
-
|
||||
-#ifdef CONFIG_PM
|
||||
-
|
||||
-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
||||
-{
|
||||
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
- struct ath_softc *sc = hw->priv;
|
||||
-
|
||||
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
|
||||
-
|
||||
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
|
||||
- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
|
||||
- cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
|
||||
-#endif
|
||||
-
|
||||
- pci_save_state(pdev);
|
||||
- pci_disable_device(pdev);
|
||||
- pci_set_power_state(pdev, 3);
|
||||
-
|
||||
- return 0;
|
||||
-}
|
||||
-
|
||||
-static int ath_pci_resume(struct pci_dev *pdev)
|
||||
-{
|
||||
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
- struct ath_softc *sc = hw->priv;
|
||||
- u32 val;
|
||||
- int err;
|
||||
-
|
||||
- err = pci_enable_device(pdev);
|
||||
- if (err)
|
||||
- return err;
|
||||
- pci_restore_state(pdev);
|
||||
- /*
|
||||
- * Suspend/Resume resets the PCI configuration space, so we have to
|
||||
- * re-disable the RETRY_TIMEOUT register (0x41) to keep
|
||||
- * PCI Tx retries from interfering with C3 CPU state
|
||||
- */
|
||||
- pci_read_config_dword(pdev, 0x40, &val);
|
||||
- if ((val & 0x0000ff00) != 0)
|
||||
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
||||
-
|
||||
- /* Enable LED */
|
||||
- ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
|
||||
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
|
||||
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
|
||||
-
|
||||
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
|
||||
- /*
|
||||
- * check the h/w rfkill state on resume
|
||||
- * and start the rfkill poll timer
|
||||
- */
|
||||
- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
|
||||
- queue_delayed_work(sc->hw->workqueue,
|
||||
- &sc->rf_kill.rfkill_poll, 0);
|
||||
-#endif
|
||||
-
|
||||
- return 0;
|
||||
-}
|
||||
-
|
||||
-#endif /* CONFIG_PM */
|
||||
-
|
||||
-MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
|
||||
-
|
||||
-static struct pci_driver ath_pci_driver = {
|
||||
- .name = "ath9k",
|
||||
- .id_table = ath_pci_id_table,
|
||||
- .probe = ath_pci_probe,
|
||||
- .remove = ath_pci_remove,
|
||||
-#ifdef CONFIG_PM
|
||||
- .suspend = ath_pci_suspend,
|
||||
- .resume = ath_pci_resume,
|
||||
-#endif /* CONFIG_PM */
|
||||
-};
|
||||
-
|
||||
-static int __init init_ath_pci(void)
|
||||
+static int __init ath9k_init(void)
|
||||
{
|
||||
int error;
|
||||
|
||||
@@ -2764,26 +2503,30 @@ static int __init init_ath_pci(void)
|
||||
printk(KERN_ERR
|
||||
"Unable to register rate control algorithm: %d\n",
|
||||
error);
|
||||
- ath_rate_control_unregister();
|
||||
- return error;
|
||||
+ goto err_out;
|
||||
}
|
||||
|
||||
- if (pci_register_driver(&ath_pci_driver) < 0) {
|
||||
+ error = ath_pci_init();
|
||||
+ if (error < 0) {
|
||||
printk(KERN_ERR
|
||||
"ath_pci: No devices found, driver not installed.\n");
|
||||
- ath_rate_control_unregister();
|
||||
- pci_unregister_driver(&ath_pci_driver);
|
||||
- return -ENODEV;
|
||||
+ error = -ENODEV;
|
||||
+ goto err_rate_unregister;
|
||||
}
|
||||
|
||||
return 0;
|
||||
+
|
||||
+ err_rate_unregister:
|
||||
+ ath_rate_control_unregister();
|
||||
+ err_out:
|
||||
+ return error;
|
||||
}
|
||||
-module_init(init_ath_pci);
|
||||
+module_init(ath9k_init);
|
||||
|
||||
-static void __exit exit_ath_pci(void)
|
||||
+static void __exit ath9k_exit(void)
|
||||
{
|
||||
+ ath_pci_exit();
|
||||
ath_rate_control_unregister();
|
||||
- pci_unregister_driver(&ath_pci_driver);
|
||||
printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
|
||||
}
|
||||
-module_exit(exit_ath_pci);
|
||||
+module_exit(ath9k_exit);
|
||||
--- /dev/null
|
||||
+++ b/drivers/net/wireless/ath9k/pci.c
|
||||
@@ -0,0 +1,289 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2008 Atheros Communications Inc.
|
||||
+ *
|
||||
+ * Permission to use, copy, modify, and/or distribute this software for any
|
||||
+ * purpose with or without fee is hereby granted, provided that the above
|
||||
+ * copyright notice and this permission notice appear in all copies.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/nl80211.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include "core.h"
|
||||
+#include "reg.h"
|
||||
+#include "hw.h"
|
||||
+
|
||||
+static struct pci_device_id ath_pci_id_table[] __devinitdata = {
|
||||
+ { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
|
||||
+ { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
|
||||
+ { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
|
||||
+ { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
|
||||
+ { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
|
||||
+ { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
|
||||
+ { 0 }
|
||||
+};
|
||||
+
|
||||
+/* return bus cachesize in 4B word units */
|
||||
+static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
|
||||
+{
|
||||
+ u8 u8tmp;
|
||||
+
|
||||
+ pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
|
||||
+ (u8 *)&u8tmp);
|
||||
+ *csz = (int)u8tmp;
|
||||
+
|
||||
+ /*
|
||||
+ * This check was put in to avoid "unplesant" consequences if
|
||||
+ * the bootrom has not fully initialized all PCI devices.
|
||||
+ * Sometimes the cache line size register is not set
|
||||
+ */
|
||||
+
|
||||
+ if (*csz == 0)
|
||||
+ *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
|
||||
+}
|
||||
+
|
||||
+static void ath_pci_cleanup(struct ath_softc *sc)
|
||||
+{
|
||||
+ struct pci_dev *pdev = to_pci_dev(sc->dev);
|
||||
+
|
||||
+ ath_detach(sc);
|
||||
+ if (pdev->irq)
|
||||
+ free_irq(pdev->irq, sc);
|
||||
+ pci_iounmap(pdev, sc->mem);
|
||||
+ pci_release_region(pdev, 0);
|
||||
+ pci_disable_device(pdev);
|
||||
+ ieee80211_free_hw(sc->hw);
|
||||
+}
|
||||
+
|
||||
+static struct ath_bus_ops ath_pci_bus_ops = {
|
||||
+ .read_cachesize = ath_pci_read_cachesize,
|
||||
+ .cleanup = ath_pci_cleanup,
|
||||
+};
|
||||
+
|
||||
+static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||||
+{
|
||||
+ void __iomem *mem;
|
||||
+ struct ath_softc *sc;
|
||||
+ struct ieee80211_hw *hw;
|
||||
+ u8 csz;
|
||||
+ u32 val;
|
||||
+ int ret = 0;
|
||||
+ struct ath_hal *ah;
|
||||
+
|
||||
+ if (pci_enable_device(pdev))
|
||||
+ return -EIO;
|
||||
+
|
||||
+ ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
||||
+
|
||||
+ if (ret) {
|
||||
+ printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
|
||||
+ goto bad;
|
||||
+ }
|
||||
+
|
||||
+ ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
||||
+
|
||||
+ if (ret) {
|
||||
+ printk(KERN_ERR "ath9k: 32-bit DMA consistent "
|
||||
+ "DMA enable failed\n");
|
||||
+ goto bad;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Cache line size is used to size and align various
|
||||
+ * structures used to communicate with the hardware.
|
||||
+ */
|
||||
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
|
||||
+ if (csz == 0) {
|
||||
+ /*
|
||||
+ * Linux 2.4.18 (at least) writes the cache line size
|
||||
+ * register as a 16-bit wide register which is wrong.
|
||||
+ * We must have this setup properly for rx buffer
|
||||
+ * DMA to work so force a reasonable value here if it
|
||||
+ * comes up zero.
|
||||
+ */
|
||||
+ csz = L1_CACHE_BYTES / sizeof(u32);
|
||||
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
|
||||
+ }
|
||||
+ /*
|
||||
+ * The default setting of latency timer yields poor results,
|
||||
+ * set it to the value used by other systems. It may be worth
|
||||
+ * tweaking this setting more.
|
||||
+ */
|
||||
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
|
||||
+
|
||||
+ pci_set_master(pdev);
|
||||
+
|
||||
+ /*
|
||||
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
|
||||
+ * PCI Tx retries from interfering with C3 CPU state.
|
||||
+ */
|
||||
+ pci_read_config_dword(pdev, 0x40, &val);
|
||||
+ if ((val & 0x0000ff00) != 0)
|
||||
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
||||
+
|
||||
+ ret = pci_request_region(pdev, 0, "ath9k");
|
||||
+ if (ret) {
|
||||
+ dev_err(&pdev->dev, "PCI memory region reserve error\n");
|
||||
+ ret = -ENODEV;
|
||||
+ goto bad;
|
||||
+ }
|
||||
+
|
||||
+ mem = pci_iomap(pdev, 0, 0);
|
||||
+ if (!mem) {
|
||||
+ printk(KERN_ERR "PCI memory map error\n") ;
|
||||
+ ret = -EIO;
|
||||
+ goto bad1;
|
||||
+ }
|
||||
+
|
||||
+ hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
|
||||
+ if (hw == NULL) {
|
||||
+ printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
|
||||
+ goto bad2;
|
||||
+ }
|
||||
+
|
||||
+ SET_IEEE80211_DEV(hw, &pdev->dev);
|
||||
+ pci_set_drvdata(pdev, hw);
|
||||
+
|
||||
+ sc = hw->priv;
|
||||
+ sc->hw = hw;
|
||||
+ sc->dev = &pdev->dev;
|
||||
+ sc->mem = mem;
|
||||
+ sc->bus_ops = &ath_pci_bus_ops;
|
||||
+
|
||||
+ if (ath_attach(id->device, sc) != 0) {
|
||||
+ ret = -ENODEV;
|
||||
+ goto bad3;
|
||||
+ }
|
||||
+
|
||||
+ /* setup interrupt service routine */
|
||||
+
|
||||
+ if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
|
||||
+ printk(KERN_ERR "%s: request_irq failed\n",
|
||||
+ wiphy_name(hw->wiphy));
|
||||
+ ret = -EIO;
|
||||
+ goto bad4;
|
||||
+ }
|
||||
+
|
||||
+ ah = sc->sc_ah;
|
||||
+ printk(KERN_INFO
|
||||
+ "%s: Atheros AR%s MAC/BB Rev:%x "
|
||||
+ "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
|
||||
+ wiphy_name(hw->wiphy),
|
||||
+ ath_mac_bb_name(ah->ah_macVersion),
|
||||
+ ah->ah_macRev,
|
||||
+ ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
|
||||
+ ah->ah_phyRev,
|
||||
+ (unsigned long)mem, pdev->irq);
|
||||
+
|
||||
+ return 0;
|
||||
+bad4:
|
||||
+ ath_detach(sc);
|
||||
+bad3:
|
||||
+ ieee80211_free_hw(hw);
|
||||
+bad2:
|
||||
+ pci_iounmap(pdev, mem);
|
||||
+bad1:
|
||||
+ pci_release_region(pdev, 0);
|
||||
+bad:
|
||||
+ pci_disable_device(pdev);
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static void ath_pci_remove(struct pci_dev *pdev)
|
||||
+{
|
||||
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
+ struct ath_softc *sc = hw->priv;
|
||||
+
|
||||
+ ath_pci_cleanup(sc);
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_PM
|
||||
+
|
||||
+static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
||||
+{
|
||||
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
+ struct ath_softc *sc = hw->priv;
|
||||
+
|
||||
+ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
|
||||
+
|
||||
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
|
||||
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
|
||||
+ cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
|
||||
+#endif
|
||||
+
|
||||
+ pci_save_state(pdev);
|
||||
+ pci_disable_device(pdev);
|
||||
+ pci_set_power_state(pdev, 3);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int ath_pci_resume(struct pci_dev *pdev)
|
||||
+{
|
||||
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
|
||||
+ struct ath_softc *sc = hw->priv;
|
||||
+ u32 val;
|
||||
+ int err;
|
||||
+
|
||||
+ err = pci_enable_device(pdev);
|
||||
+ if (err)
|
||||
+ return err;
|
||||
+ pci_restore_state(pdev);
|
||||
+ /*
|
||||
+ * Suspend/Resume resets the PCI configuration space, so we have to
|
||||
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
|
||||
+ * PCI Tx retries from interfering with C3 CPU state
|
||||
+ */
|
||||
+ pci_read_config_dword(pdev, 0x40, &val);
|
||||
+ if ((val & 0x0000ff00) != 0)
|
||||
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
||||
+
|
||||
+ /* Enable LED */
|
||||
+ ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
|
||||
+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
|
||||
+ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
|
||||
+
|
||||
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
|
||||
+ /*
|
||||
+ * check the h/w rfkill state on resume
|
||||
+ * and start the rfkill poll timer
|
||||
+ */
|
||||
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
|
||||
+ queue_delayed_work(sc->hw->workqueue,
|
||||
+ &sc->rf_kill.rfkill_poll, 0);
|
||||
+#endif
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+#endif /* CONFIG_PM */
|
||||
+
|
||||
+MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
|
||||
+
|
||||
+static struct pci_driver ath_pci_driver = {
|
||||
+ .name = "ath9k",
|
||||
+ .id_table = ath_pci_id_table,
|
||||
+ .probe = ath_pci_probe,
|
||||
+ .remove = ath_pci_remove,
|
||||
+#ifdef CONFIG_PM
|
||||
+ .suspend = ath_pci_suspend,
|
||||
+ .resume = ath_pci_resume,
|
||||
+#endif /* CONFIG_PM */
|
||||
+};
|
||||
+
|
||||
+int __init ath_pci_init(void)
|
||||
+{
|
||||
+ return pci_register_driver(&ath_pci_driver);
|
||||
+}
|
||||
+
|
||||
+void ath_pci_exit(void)
|
||||
+{
|
||||
+ pci_unregister_driver(&ath_pci_driver);
|
||||
+}
|
||||
Loading…
Reference in New Issue