mirror of https://github.com/hak5/openwrt-owl.git
Imre Kaloz
parent
2f94cac6c2
commit
b72a5b42bd
|
|
@ -18,8 +18,6 @@ CONFIG_ARCH_AVILA=y
|
|||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP32X is not set
|
||||
# CONFIG_ARCH_IOP33X is not set
|
||||
CONFIG_MACH_PRONGHORN=y
|
||||
CONFIG_MACH_PRONGHORNMETRO=y
|
||||
CONFIG_ARCH_IXDP425=y
|
||||
CONFIG_ARCH_IXDP4XX=y
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
|
|
@ -221,6 +219,9 @@ CONFIG_MACH_GATEWAY7001=y
|
|||
# CONFIG_MACH_IXDPG425 is not set
|
||||
CONFIG_MACH_NAS100D=y
|
||||
CONFIG_MACH_NSLU2=y
|
||||
CONFIG_MACH_PRONGHORN=y
|
||||
CONFIG_MACH_PRONGHORNMETRO=y
|
||||
CONFIG_MACH_WG302V2=y
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
CONFIG_MINI_FO=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,231 @@
|
|||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:09:06.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:01:25.000000000 +0200
|
||||
@@ -41,6 +41,14 @@
|
||||
7001 Access Point. For more information on this platform,
|
||||
see http://openwrt.org
|
||||
|
||||
+config MACH_WG302V2
|
||||
+ bool "Netgear WG302 v2 / WAG302 v2"
|
||||
+ select PCI
|
||||
+ help
|
||||
+ Say 'Y' here if you want your kernel to support Netgear's
|
||||
+ WG302 v2 or WAG302 v2 Access Points. For more information
|
||||
+ on this platform, see http://openwrt.org
|
||||
+
|
||||
config ARCH_IXDP425
|
||||
bool "IXDP425"
|
||||
help
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:06.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:25.000000000 +0200
|
||||
@@ -12,6 +12,7 @@
|
||||
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
|
||||
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
||||
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
||||
+obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
||||
|
||||
obj-y += common.o
|
||||
|
||||
@@ -22,5 +23,6 @@
|
||||
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
|
||||
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
|
||||
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
||||
+obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
||||
|
||||
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c 2007-04-02 16:00:12.000000000 +0200
|
||||
@@ -0,0 +1,68 @@
|
||||
+/*
|
||||
+ * arch/arch/mach-ixp4xx/wg302v2-pci.c
|
||||
+ *
|
||||
+ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
|
||||
+ *
|
||||
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * based on coyote-pci.c:
|
||||
+ * Copyright (C) 2002 Jungo Software Technologies.
|
||||
+ * Copyright (C) 2003 MontaVista Software, Inc.
|
||||
+ *
|
||||
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/irq.h>
|
||||
+
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/irq.h>
|
||||
+
|
||||
+#include <asm/mach/pci.h>
|
||||
+
|
||||
+extern void ixp4xx_pci_preinit(void);
|
||||
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
|
||||
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
|
||||
+
|
||||
+void __init wg302v2_pci_preinit(void)
|
||||
+{
|
||||
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
|
||||
+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
|
||||
+
|
||||
+ ixp4xx_pci_preinit();
|
||||
+}
|
||||
+
|
||||
+static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
+{
|
||||
+ if (slot == 1)
|
||||
+ return IRQ_IXP4XX_GPIO8;
|
||||
+ else if (slot == 2)
|
||||
+ return IRQ_IXP4XX_GPIO9;
|
||||
+ else return -1;
|
||||
+}
|
||||
+
|
||||
+struct hw_pci wg302v2_pci __initdata = {
|
||||
+ .nr_controllers = 1,
|
||||
+ .preinit = wg302v2_pci_preinit,
|
||||
+ .swizzle = pci_std_swizzle,
|
||||
+ .setup = ixp4xx_setup,
|
||||
+ .scan = ixp4xx_scan_bus,
|
||||
+ .map_irq = wg302v2_map_irq,
|
||||
+};
|
||||
+
|
||||
+int __init wg302v2_pci_init(void)
|
||||
+{
|
||||
+ if (machine_is_wg302v2())
|
||||
+ pci_common_init(&wg302v2_pci);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+subsys_initcall(wg302v2_pci_init);
|
||||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:08:57.000000000 +0200
|
||||
@@ -0,0 +1,107 @@
|
||||
+/*
|
||||
+ * arch/arm/mach-ixp4xx/wg302-setup.c
|
||||
+ *
|
||||
+ * Board setup for the Netgear WG302 v2 and WAG302 v2
|
||||
+ *
|
||||
+ * based on coyote-setup.c:
|
||||
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
||||
+ *
|
||||
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/device.h>
|
||||
+#include <linux/serial.h>
|
||||
+#include <linux/tty.h>
|
||||
+#include <linux/serial_8250.h>
|
||||
+#include <linux/slab.h>
|
||||
+
|
||||
+#include <asm/types.h>
|
||||
+#include <asm/setup.h>
|
||||
+#include <asm/memory.h>
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/irq.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/flash.h>
|
||||
+
|
||||
+static struct flash_platform_data wg302v2_flash_data = {
|
||||
+ .map_name = "cfi_probe",
|
||||
+ .width = 2,
|
||||
+};
|
||||
+
|
||||
+static struct resource wg302v2_flash_resource = {
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wg302v2_flash = {
|
||||
+ .name = "IXP4XX-Flash",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wg302v2_flash_data,
|
||||
+ },
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &wg302v2_flash_resource,
|
||||
+};
|
||||
+
|
||||
+static struct resource wg302v2_uart_resource = {
|
||||
+ .start = IXP4XX_UART2_BASE_PHYS,
|
||||
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct plat_serial8250_port wg302v2_uart_data[] = {
|
||||
+ {
|
||||
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||
+ .irq = IRQ_IXP4XX_UART2,
|
||||
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
+ .iotype = UPIO_MEM,
|
||||
+ .regshift = 2,
|
||||
+ .uartclk = IXP4XX_UART_XTAL,
|
||||
+ },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wg302v2_uart = {
|
||||
+ .name = "serial8250",
|
||||
+ .id = PLAT8250_DEV_PLATFORM,
|
||||
+ .dev = {
|
||||
+ .platform_data = wg302v2_uart_data,
|
||||
+ },
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &wg302v2_uart_resource,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device *wg302v2_devices[] __initdata = {
|
||||
+ &wg302v2_flash,
|
||||
+ &wg302v2_uart,
|
||||
+};
|
||||
+
|
||||
+static void __init wg302v2_init(void)
|
||||
+{
|
||||
+ ixp4xx_sys_init();
|
||||
+
|
||||
+ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||
+ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
||||
+
|
||||
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
||||
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
||||
+
|
||||
+ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_ARCH_WG302V2
|
||||
+MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
|
||||
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
|
||||
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||
+ .map_io = ixp4xx_map_io,
|
||||
+ .init_irq = ixp4xx_init_irq,
|
||||
+ .timer = &ixp4xx_timer,
|
||||
+ .boot_params = 0x0100,
|
||||
+ .init_machine = wg302v2_init,
|
||||
+MACHINE_END
|
||||
+#endif
|
||||
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
|
||||
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:09:06.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:02:04.000000000 +0200
|
||||
@@ -40,7 +40,7 @@
|
||||
/*
|
||||
* Some boards are using UART2 as console
|
||||
*/
|
||||
- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
|
||||
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
|
||||
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
|
||||
else
|
||||
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
|
||||
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:06:02.000000000 +0200
|
||||
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-03-05 11:57:24.000000000 +0100
|
||||
@@ -75,9 +75,33 @@
|
||||
.resource = &wg302v2_uart_resource,
|
||||
};
|
||||
|
||||
+static struct resource res_mac0 = {
|
||||
+ .start = IXP4XX_EthB_BASE_PHYS,
|
||||
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+};
|
||||
+
|
||||
+static struct mac_plat_info plat_mac0 = {
|
||||
+ .npe_id = 1,
|
||||
+ .phy_id = 8,
|
||||
+ .eth_id = 0,
|
||||
+ .rxq_id = 27,
|
||||
+ .txq_id = 24,
|
||||
+ .rxdoneq_id = 4,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device mac0 = {
|
||||
+ .name = "ixp4xx_mac",
|
||||
+ .id = 0,
|
||||
+ .dev.platform_data = &plat_mac0,
|
||||
+ .num_resources = 1,
|
||||
+ .resource = &res_mac0,
|
||||
+};
|
||||
+
|
||||
static struct platform_device *wg302v2_devices[] __initdata = {
|
||||
&wg302v2_flash,
|
||||
&wg302v2_uart,
|
||||
+ &mac0,
|
||||
};
|
||||
|
||||
static void __init wg302v2_init(void)
|
||||
Loading…
Reference in New Issue