ar71xx: add support for TP-Link TL-WDR6500 v2

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds support for TP-Link TL-WDR6500 v2.

The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for
the whole firmware, so I have to create a new firmware creation method.

SVN-Revision: 46663

target/linux/ar71xx/base-files/etc/diag.sh

@@ -289,6 +289,9 @@ get_status_led() {
 	tl-wr2543n)
 		status_led="tp-link:green:wps"
 		;;
+	tl-wdr6500-v2)
+		status_led="tp-link:white:system"
+		;;
 	tube2h)
 		status_led="alfa:green:signal4"
 		;;

target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -54,6 +54,10 @@ case "$FIRMWARE" in
 		ath10kcal_extract "art" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
 		;;
+	tl-wdr6500-v2)
+		ath10kcal_extract "art" 20480 2116
+		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
+		;;
 	r6100)
 		ath10kcal_extract "caldata" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2)

target/linux/ar71xx/base-files/etc/uci-defaults/01_leds

@@ -443,6 +443,14 @@ tl-wdr4900-v2)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt"
 	;;
 
+tl-wdr6500-v2)
+	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
+	;;
+
 archer-c5|\
 archer-c7)
 	ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1"

target/linux/ar71xx/base-files/etc/uci-defaults/02_network

@@ -234,6 +234,7 @@ tl-mr3420-v2 |\
 tl-wr841n-v8 |\
 tl-wr842n-v2 |\
 tl-wr941nd-v5 |\
+tl-wdr6500-v2 |\
 wnr2000-v3 |\
 wnr2000-v4 |\
 wnr2200 |\

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -240,6 +240,9 @@ tplink_board_detect() {
 	"49000002")
 		model="TP-Link TL-WDR4900"
 		;;
+	"65000002")
+		model="TP-Link TL-WDR6500"
+		;;
 	"453000"*)
 		model="MERCURY MW4530R"
 		;;
@@ -769,6 +772,9 @@ ar71xx_board_detect() {
 	*"TL-WDR4900 v2")
 		name="tl-wdr4900-v2"
 		;;
+	*"TL-WDR6500 v2")
+		name="tl-wdr6500-v2"
+		;;
 	*TL-WR741ND)
 		name="tl-wr741nd"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -341,6 +341,7 @@ platform_check_image() {
 	tl-wdr3500 | \
 	tl-wdr4300 | \
 	tl-wdr4900-v2 | \
+	tl-wdr6500-v2 | \
 	tl-wr703n | \
 	tl-wr710n | \
 	tl-wr720n-v3 | \
@@ -358,7 +359,15 @@ platform_check_image() {
 	tl-wr1043nd | \
 	tl-wr1043nd-v2 | \
 	tl-wr2543n)
-		[ "$magic" != "0100" ] && {
+		local magic_ver="0100"
+
+		case "$board" in
+		tl-wdr6500-v2)
+			magic_ver="0200"
+			;;
+		esac
+
+		[ "$magic" != "$magic_ver" ] && {
 			echo "Invalid image type."
 			return 1
 		}

target/linux/ar71xx/config-4.1

@@ -123,6 +123,7 @@ CONFIG_ATH79_MACH_TL_WA901ND_V2=y
 CONFIG_ATH79_MACH_TL_WAX50RE=y
 CONFIG_ATH79_MACH_TL_WDR3500=y
 CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WDR6500_V2=y
 CONFIG_ATH79_MACH_TL_WR1041N_V2=y
 CONFIG_ATH79_MACH_TL_WR1043ND=y
 CONFIG_ATH79_MACH_TL_WR1043ND_V2=y

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c

@@ -0,0 +1,141 @@
+/*
+ *  TP-LINK TL-WDR6500 v2
+ *
+ *  Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WDR6500_V2_GPIO_LED_SYS	21
+#define TL_WDR6500_V2_GPIO_LED_WAN	18
+#define TL_WDR6500_V2_GPIO_LED_LAN1	17
+#define TL_WDR6500_V2_GPIO_LED_LAN2	16
+#define TL_WDR6500_V2_GPIO_LED_LAN3	15
+#define TL_WDR6500_V2_GPIO_LED_LAN4	14
+
+#define TL_WDR6500_V2_GPIO_BTN_RESET	1
+
+#define TL_WDR6500_V2_KEYS_POLL_INTERVAL	20	/* msecs */
+#define TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WDR6500_V2_KEYS_POLL_INTERVAL)
+
+#define TL_WDR6500_V2_WMAC_CALDATA_OFFSET	0x1000
+#define TL_WDR6500_V2_PCIE_CALDATA_OFFSET	0x5000
+
+static const char *tl_wdr6500_v2_part_probes[] = {
+	"tp-link-64k",
+	NULL,
+};
+
+static struct flash_platform_data tl_wdr6500_v2_flash_data = {
+	.part_probes	= tl_wdr6500_v2_part_probes,
+};
+
+static struct gpio_led tl_wdr6500_v2_leds_gpio[] __initdata = {
+	{
+		.name		= "tp-link:green:lan1",
+		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN1,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:lan2",
+		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN2,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:lan3",
+		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN3,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:lan4",
+		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN4,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:wan",
+		.gpio		= TL_WDR6500_V2_GPIO_LED_WAN,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:white:system",
+		.gpio		= TL_WDR6500_V2_GPIO_LED_SYS,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button tl_wdr6500_v2_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WDR6500_V2_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+
+static void __init tl_ap151_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000);
+	u8 tmpmac[ETH_ALEN];
+
+	ath79_register_m25p80(&tl_wdr6500_v2_flash_data);
+
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	ath79_register_mdio(0, 0x0);
+
+	/* WAN */
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_switch_data.phy_poll_mask = BIT(4);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+	ath79_register_eth(0);
+
+	/* LAN */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+	ath79_register_eth(1);
+
+	ath79_init_mac(tmpmac, mac, -1);
+	ath79_register_wmac(ee + TL_WDR6500_V2_WMAC_CALDATA_OFFSET, tmpmac);
+
+	ath79_register_pci();
+
+	ath79_register_usb();
+}
+
+static void __init tl_wdr6500_v2_setup(void)
+{
+	tl_ap151_setup();
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr6500_v2_leds_gpio),
+				 tl_wdr6500_v2_leds_gpio);
+
+	ath79_register_gpio_keys_polled(1, TL_WDR6500_V2_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wdr6500_v2_gpio_keys),
+					tl_wdr6500_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR6500_V2, "TL-WDR6500-v2", "TP-LINK TL-WDR6500 v2",
+	     tl_wdr6500_v2_setup);

target/linux/ar71xx/generic/profiles/tp-link.mk

@@ -277,6 +277,17 @@ endef
 $(eval $(call Profile,TLWDR4900V2))
 
 
+define Profile/TLWDR6500V2
+	NAME:=TP-LINK TL-WDR6500v2
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k
+endef
+
+define Profile/TLWDR6500V2/Description
+	Package set optimized for the TP-LINK TL-WDR6500v2.
+endef
+$(eval $(call Profile,TLWDR6500V2))
+
+
 define Profile/TLWR740
 	NAME:=TP-LINK TL-WR740N/ND
 	PACKAGES:=

target/linux/ar71xx/image/Makefile

@@ -1745,6 +1745,37 @@ define Image/Build/TPLINK-LZMA/initramfs
 		-o $(call imgname,$(1),$(2))-uImage.bin
 endef
 
+Image/Build/TPLINK-64K/buildkernel=$(call PatchKernelLzma,$(2),$(3))
+
+define Image/Build/TPLINK-64K
+	-$(STAGING_DIR_HOST)/bin/mkimage \
+		-A mips -O linux -T kernel -a 0x80060000 -C lzma \
+		-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+		-d $$(KDIR_TMP)/vmlinux-$(2).bin.lzma $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img
+	-$(STAGING_DIR_HOST)/bin/mktplinkfw \
+		-H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) \
+		-X 0x20000 \
+		-k $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img \
+		-r $(KDIR)/root.$(1) \
+		-a $(call rootfs_align,$(1)) -j \
+		-o $(call factoryname,$(1),$(2))
+	-$(STAGING_DIR_HOST)/bin/mktplinkfw \
+		-H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) -s \
+		-X 0x20000 \
+		-k $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img \
+		-r $(KDIR)/root.$(1) \
+		-a $(call rootfs_align,$(1)) -j \
+		-o $(call sysupname,$(1),$(2))
+endef
+
+define Image/Build/TPLINK-64K/initramfs
+	$(call PatchKernelLzma,$(2),$(3),,-initramfs)
+	-$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
+		-H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) -s \
+		-k $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.img \
+		-o $(call imgname,$(1),$(2))-uImage.bin
+endef
+
 
 Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
 
@@ -2173,6 +2204,8 @@ $(eval $(call SingleProfile,TPLINK,64kraw,TLWR1043V1,tl-wr1043nd-v1,TL-WR1043ND,
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V2,tl-wr1043nd-v2,TL-WR1043ND-v2,ttyS0,115200,0x10430002,1,8M))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99))
 
+$(eval $(call SingleProfile,TPLINK-64K,64kraw,TLWDR6500V2,tl-wdr6500-v2,TL-WDR6500-v2,ttyS0,115200,0x65000002,1,8Mlzma))
+
 $(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
 
 $(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))

target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch

@@ -0,0 +1,40 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1043,6 +1043,17 @@
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_TL_WDR6500_V2
++	bool "TP-LINK TL-WDR6500 v2 board support"
++	select SOC_QCA956X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
+ config ATH79_MACH_TL_WR703N
+ 	bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
+ 	select SOC_AR933X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -153,6 +153,7 @@
+ 	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
+ 	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
+ 	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
++	ATH79_MACH_TL_WDR6500_V2,	/* TP-LINK TL-WDR6500 v2 */
+ 	ATH79_MACH_TL_WDR4900_V2,	/* TP-LINK TL-WDR4900 v2 */
+ 	ATH79_MACH_TL_WR1041N_V2,	/* TP-LINK TL-WR1041N v2 */
+ 	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -129,6 +129,7 @@
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
+ obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)  += mach-tl-wdr6500-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o