hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

switch to 2.6.23 

SVN-Revision: 9260
owl
Gabor Juhos 2007-10-11 09:11:56 +00:00
parent 64734f94c7
commit a72e25de51
23 changed files with 58 additions and 1231 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/adm5120/Makefile
View File

@ -8,7 +8,7 @@
include $(TOPDIR)/rules.mk
BOARD:=adm5120
LINUX_VERSION:=2.6.22.4
LINUX_VERSION:=2.6.23
FEATURES:=squashfs jffs2 tgz broken
include $(INCLUDE_DIR)/target.mk

2
target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c
View File

@ -199,7 +199,7 @@ void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
adm5120_pci_irq_map = map;
}
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
int i;

53
target/linux/adm5120/files/drivers/leds/leds-adm5120.c
View File

@ -29,13 +29,13 @@
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/gpio_leds.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <adm5120_info.h>
#define NUM_LEDS_MAX 23
@ -43,12 +43,13 @@
struct mach_data {
unsigned long machtype;
unsigned count;
struct gpio_led_platform_data *data;
unsigned nr_leds;
struct gpio_led *leds;
};
struct adm5120_leddev {
struct platform_device pdev;
struct gpio_led led;
struct gpio_led_platform_data pdata;
};
@ -56,19 +57,17 @@ static int led_count = 0;
static struct adm5120_leddev *led_devs[NUM_LEDS_MAX];
#define LED_ARRAY(n) \
static struct gpio_led_platform_data \
n ## _leds [] __initdata =
static struct gpio_led n ## _leds [] __initdata =
#define LED_DATA(n,t,g,off,on) { \
#define LED_DATA(n,t,g,al) { \
.name = (n), \
.trigger = (t), \
.default_trigger = (t), \
.gpio = (g), \
.value_off = (off), \
.value_on = (on) \
.active_low = (al) \
}
#define LED_STD(g,n,t) LED_DATA((n),(t),(g), 0, 1)
#define LED_INV(g,n,t) LED_DATA((n),(t),(g), 1, 0)
#define LED_STD(g,n,t) LED_DATA((n),(t),(g), 0)
#define LED_INV(g,n,t) LED_DATA((n),(t),(g), 1)
/*
* Compex boards
@ -218,8 +217,8 @@ LED_ARRAY(generic) {
#define MACH_DATA(m, n) { \
.machtype = (m), \
.count = ARRAY_SIZE(n ## _leds), \
.data = n ## _leds \
.nr_leds = ARRAY_SIZE(n ## _leds), \
.leds = n ## _leds \
}
static struct mach_data machines[] __initdata = {
@ -250,7 +249,7 @@ static struct mach_data machines[] __initdata = {
};
static struct adm5120_leddev * __init
create_leddev(struct gpio_led_platform_data *data)
create_leddev(int id, struct gpio_led *led)
{
struct adm5120_leddev *p;
@ -258,17 +257,21 @@ create_leddev(struct gpio_led_platform_data *data)
if (p == NULL)
return NULL;
memcpy(&p->pdata, data, sizeof(p->pdata));
memcpy(&p->led, led, sizeof(p->led));
p->pdev.name = "leds-gpio";
p->pdev.id = id;
p->pdev.dev.platform_data = &p->pdata;
p->pdata.num_leds=1;
p->pdata.leds = &p->led;
return p;
}
static void
destroy_leddev(struct adm5120_leddev *led)
destroy_leddev(struct adm5120_leddev *leddev)
{
if (led)
kfree(led);
if (leddev)
kfree(leddev);
}
static struct mach_data * __init
@ -311,23 +314,21 @@ adm5120_leds_init(void)
goto err;
}
for (i=0; i < mach->count; i++) {
led_devs[i] = create_leddev(&mach->data[i]);
for (i=0; i < mach->nr_leds; i++) {
led_devs[i] = create_leddev(i, &mach->leds[i]);
if (led_devs[i] == NULL) {
ret = -ENOMEM;
goto err_destroy;
}
led_devs[i]->pdev.name = "gpio-led";
led_devs[i]->pdev.id = i;
}
for (i=0; i < mach->count; i++) {
for (i=0; i < mach->nr_leds; i++) {
ret = platform_device_register(&led_devs[i]->pdev);
if (ret)
goto err_unregister;
}
led_count = mach->count;
led_count = mach->nr_leds;
return 0;
err_unregister:

212
target/linux/adm5120/files/drivers/leds/leds-gpio.c
View File

@ -1,212 +0,0 @@
/*
* $Id$
*
* Driver for LEDs connected to GPIO lines
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
* This file was derived from:
* /drivers/led/leds-s3c24xx.c
* (c) 2006 Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/gpio_leds.h>
#include <asm/io.h>
#include <asm/gpio.h>
#define DRV_NAME "gpio-led"
#define DRV_DESC "GPIO LEDs driver"
struct gpio_led_device {
struct led_classdev cdev;
struct gpio_led_platform_data *pdata;
};
static inline struct gpio_led_device *pdev_to_led(struct platform_device *dev)
{
return platform_get_drvdata(dev);
}
static inline struct gpio_led_device *class_to_led(struct led_classdev *led_cdev)
{
return container_of(led_cdev, struct gpio_led_device, cdev);
}
static void gpio_led_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct gpio_led_device *led;
struct gpio_led_platform_data *pdata;
led = class_to_led(led_cdev);
pdata = led->pdata;
switch (brightness) {
case LED_FULL:
gpio_direction_output(pdata->gpio, pdata->value_on);
break;
case LED_OFF:
gpio_direction_output(pdata->gpio, pdata->value_off);
break;
default:
gpio_direction_output(pdata->gpio, brightness);
break;
}
}
static int __devinit gpio_led_probe(struct platform_device *dev)
{
struct gpio_led_platform_data *pdata;
struct gpio_led_device *led;
int ret;
pdata = dev->dev.platform_data;
if (pdata == NULL) {
dev_err(&dev->dev, "no platform data, id=%d\n", dev->id);
ret = -EINVAL;
goto err;
}
if (pdata->name == NULL) {
dev_err(&dev->dev, "no led name specified\n");
ret = -EINVAL;
goto err;
}
ret = gpio_request(pdata->gpio, pdata->name);
if (ret) {
dev_err(&dev->dev, "gpio_request failed\n");
goto err;
}
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (led == NULL) {
dev_err(&dev->dev, "no memory for device");
ret = -ENOMEM;
goto err_free_gpio;
}
platform_set_drvdata(dev, led);
led->pdata = pdata;
led->cdev.name = pdata->name;
led->cdev.brightness_set = gpio_led_set;
#ifdef CONFIG_LEDS_TRIGGERS
led->cdev.default_trigger = pdata->trigger;
#endif
ret = led_classdev_register(&dev->dev, &led->cdev);
if (ret < 0) {
dev_err(&dev->dev, "led_classdev_register failed");
goto err_free_led;
}
return 0;
err_free_led:
kfree(led);
err_free_gpio:
gpio_free(pdata->gpio);
err:
return ret;
}
static int __devexit gpio_led_remove(struct platform_device *dev)
{
struct gpio_led_device *led;
struct gpio_led_platform_data *pdata;
pdata = dev->dev.platform_data;
led = pdev_to_led(dev);
led_classdev_unregister(&led->cdev);
kfree(led);
gpio_free(pdata->gpio);
return 0;
}
#ifdef CONFIG_PM
static int gpio_led_suspend(struct platform_device *dev,
pm_message_t state)
{
struct gpio_led_device *led;
led = pdev_to_led(dev);
led_classdev_suspend(&led->cdev);
return 0;
}
static int gpio_led_resume(struct platform_device *dev)
{
struct gpio_led_device *led;
led = pdev_to_led(dev);
led_classdev_resume(&led->cdev);
return 0;
}
#endif /* CONFIG_PM */
static struct platform_driver gpio_led_driver = {
.probe = gpio_led_probe,
.remove = __devexit_p(gpio_led_remove),
#ifdef CONFIG_PM
.suspend = gpio_led_suspend,
.resume = gpio_led_resume,
#endif
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
static int __init gpio_led_init(void)
{
int ret;
ret = platform_driver_register(&gpio_led_driver);
if (ret)
printk(KERN_ALERT DRV_DESC " register failed\n");
else
printk(KERN_INFO DRV_DESC " registered\n");
return ret;
}
static void __exit gpio_led_exit(void)
{
platform_driver_unregister(&gpio_led_driver);
}
module_init(gpio_led_init);
module_exit(gpio_led_exit);
MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
MODULE_DESCRIPTION(DRV_DESC);
MODULE_LICENSE("GPL");

115
target/linux/adm5120/patches-2.6.22/001-adm5120.patch
View File

@ -1,115 +0,0 @@
Index: linux-2.6.22.1/arch/mips/Kconfig
===================================================================
--- linux-2.6.22.1.orig/arch/mips/Kconfig
+++ linux-2.6.22.1/arch/mips/Kconfig
@@ -15,6 +15,18 @@ choice
prompt "System type"
default SGI_IP22
+config MIPS_ADM5120
+ bool "Support for ADM5120 SoC"
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_GPIO
+
config MACH_ALCHEMY
bool "Alchemy processor based machines"
@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938
endchoice
+source "arch/mips/adm5120/Kconfig"
source "arch/mips/au1000/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
Index: linux-2.6.22.1/arch/mips/Makefile
===================================================================
--- linux-2.6.22.1.orig/arch/mips/Makefile
+++ linux-2.6.22.1/arch/mips/Makefile
@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
+# ADMtek 5120
+#
+
+libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/
+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
+
+#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
Index: linux-2.6.22.1/include/asm-mips/bootinfo.h
===================================================================
--- linux-2.6.22.1.orig/include/asm-mips/bootinfo.h
+++ linux-2.6.22.1/include/asm-mips/bootinfo.h
@@ -213,6 +213,58 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
+ * Valid machtype for group ADMtek ADM5120
+ */
+#define MACH_GROUP_ADM5120 26
+#define MACH_ADM5120_GENERIC 0 /* Generic board */
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */
+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */
+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */
+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */
+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */
+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */
+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */
+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */
+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */
+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */
+#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */
+#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */
+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */
+#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */
+#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K */
+#define MACH_ADM5120_RB_192 47 /* Mikrotik RouterBOARD 192 */
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);

26
target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch
View File

@ -1,26 +0,0 @@
Index: linux-2.6.22.1/drivers/mtd/maps/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/maps/Kconfig
+++ linux-2.6.22.1/drivers/mtd/maps/Kconfig
@@ -620,5 +620,9 @@ config MTD_PLATRAM
This selection automatically selects the map_ram driver.
+config MTD_ADM5120
+ tristate "Map driver for ADM5120 based boards"
+ depends on MIPS_ADM5120
+
endmenu
Index: linux-2.6.22.1/drivers/mtd/maps/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/maps/Makefile
+++ linux-2.6.22.1/drivers/mtd/maps/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
obj-$(CONFIG_MTD_LASAT) += lasat.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o

27
target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch
View File

@ -1,27 +0,0 @@
Index: linux-2.6.22.1/drivers/net/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/net/Kconfig
+++ linux-2.6.22.1/drivers/net/Kconfig
@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
+config MIPS_ADM5120_ENET
+ tristate "MIPS ADM5120 Ethernet switch support"
+ depends on NET_ETHERNET && MIPS_ADM5120
+
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
Index: linux-2.6.22.1/drivers/net/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/net/Makefile
+++ linux-2.6.22.1/drivers/net/Makefile
@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o

33
target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch
View File

@ -1,33 +0,0 @@
Index: linux-2.6.22.1/drivers/mtd/nand/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/nand/Kconfig
+++ linux-2.6.22.1/drivers/mtd/nand/Kconfig
@@ -81,6 +81,16 @@ config MTD_NAND_TS7250
help
Support for NAND flash on Technologic Systems TS-7250 platform.
+config MTD_NAND_ADM5120
+ tristate "ADM5120 NAND support"
+ depends on MTD_NAND && MIPS_ADM5120
+ help
+ This enables the driver for the ADM5120 SoC built-in
+ NAND flash interface.
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
config MTD_NAND_IDS
tristate
Index: linux-2.6.22.1/drivers/mtd/nand/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/nand/Makefile
+++ linux-2.6.22.1/drivers/mtd/nand/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
+obj-$(CONFIG_MTD_NAND_ADM5120) += adm5120-nand.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o

35
target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch
View File

@ -1,35 +0,0 @@
Index: linux-2.6.22.1/drivers/usb/host/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/host/Kconfig
+++ linux-2.6.22.1/drivers/usb/host/Kconfig
@@ -237,3 +237,6 @@ config USB_SL811_CS
To compile this driver as a module, choose M here: the
module will be called "sl811_cs".
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
Index: linux-2.6.22.1/drivers/usb/host/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/host/Makefile
+++ linux-2.6.22.1/drivers/usb/host/Makefile
@@ -8,6 +8,7 @@ endif
obj-$(CONFIG_PCI) += pci-quirks.o
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
Index: linux-2.6.22.1/drivers/usb/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/Makefile
+++ linux-2.6.22.1/drivers/usb/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_OHCI_AT91) += host/
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/

45
target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch
View File

@ -1,45 +0,0 @@
Index: linux-2.6.22.1/drivers/leds/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/leds/Kconfig
+++ linux-2.6.22.1/drivers/leds/Kconfig
@@ -20,6 +20,27 @@ config LEDS_CLASS
comment "LED drivers"
+config LEDS_GPIO
+ tristate "LED support for LEDS on GPIO lines"
+ depends on LEDS_CLASS && GENERIC_GPIO
+ help
+ This option enables support for LEDs connected to GPIO lines
+
+config LEDS_ADM5120
+ tristate "LED Support for ADM5120 GPIO LEDs"
+ depends on LEDS_GPIO && MIPS_ADM5120
+ help
+ This option enables support for LEDs connected to GPIO lines
+ on ADM5120 SoC based platforms.
+
+config LEDS_ADM5120_EXPERIMENTAL
+ bool "Enable ADM5120 LEDs experimental code"
+ depends on LEDS_ADM5120
+
+config LEDS_ADM5120_DIAG
+ bool "Enable ADM5120 LEDs diagnostic mode"
+ depends on LEDS_ADM5120
+
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
Index: linux-2.6.22.1/drivers/leds/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/leds/Makefile
+++ linux-2.6.22.1/drivers/leds/Makefile
@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o

23
target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch
View File

@ -1,23 +0,0 @@
Index: linux-2.6.22.1/arch/mips/pci/Makefile
===================================================================
--- linux-2.6.22.1.orig/arch/mips/pci/Makefile
+++ linux-2.6.22.1/arch/mips/pci/Makefile
@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
Index: linux-2.6.22.1/include/linux/pci_ids.h
===================================================================
--- linux-2.6.22.1.orig/include/linux/pci_ids.h
+++ linux-2.6.22.1/include/linux/pci_ids.h
@@ -1713,6 +1713,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+#define PCI_VENDOR_ID_ADMTEK 0x1317
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
+
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000

53
target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch
View File

@ -1,53 +0,0 @@
Index: linux-2.6.22.1/drivers/serial/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/serial/Makefile
+++ linux-2.6.22.1/drivers/serial/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
Index: linux-2.6.22.1/include/linux/serial_core.h
===================================================================
--- linux-2.6.22.1.orig/include/linux/serial_core.h
+++ linux-2.6.22.1/include/linux/serial_core.h
@@ -143,6 +143,9 @@
#define PORT_KS8695 76
+/* ADMtek ADM5120 SoC */
+#define PORT_ADM5120 77
+
#ifdef __KERNEL__
#include <linux/compiler.h>
Index: linux-2.6.22.1/drivers/serial/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/serial/Kconfig
+++ linux-2.6.22.1/drivers/serial/Kconfig
@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
comment "Non-8250 serial port support"
+config SERIAL_ADM5120
+ bool "ADM5120 serial port support"
+ depends on MIPS_ADM5120
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ Driver for the on chip UARTs on the ADM5120 SoC
+
+config ADM5120_NR_UARTS
+ int "Maximum number of ADM5120 serial ports"
+ depends on SERIAL_ADM5120
+ default "2"
+ ---help---
+ Set this to the number of serial ports you want the driver to
+ support.
+
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)

39
target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch
View File

@ -1,39 +0,0 @@
Index: linux-2.6.22.1/drivers/mtd/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/Kconfig
+++ linux-2.6.22.1/drivers/mtd/Kconfig
@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on MIPS_ADM5120 && MTD_PARTITIONS
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
config MTD_CHAR
Index: linux-2.6.22.1/drivers/mtd/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/Makefile
+++ linux-2.6.22.1/drivers/mtd/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

95
target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch
View File

@ -1,95 +0,0 @@
Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c
+++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
#define MANUFACTURER_SST 0x00BF
+#define MANUFACTURER_MACRONIX 0x00C2
#define SST49LF004B 0x0060
#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6
#define MANUFACTURER_SAMSUNG 0x00ec
+/* Macronix */
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
+
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct
mtd->flags |= MTD_STUPID_LOCK;
}
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+/*
+ * Some Macronix chips has no/bad bootblock information in the CFI table
+ */
+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+ __u8 t;
+
+ switch (cfi->id) {
+ /* TODO: put affected chip ids here */
+ case MX29LV160B:
+ case MX29LV320B:
+ t = 2; /* Bottom boot */
+ break;
+ case MX29LV160T:
+ case MX29LV320T:
+ t = 3; /* Top boot */
+ break;
+ default:
+ return;
+ }
+
+ if (extp->TopBottom == t)
+ /* boot location detected by the CFI layer is correct */
+ return;
+
+ extp->TopBottom = t;
+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
+}
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
+
static struct cfi_fixup cfi_fixup_table[] = {
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
+#endif
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
Index: linux-2.6.22.1/drivers/mtd/chips/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/chips/Kconfig
+++ linux-2.6.22.1/drivers/mtd/chips/Kconfig
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+ bool "Fix boot-block location for Macronix flash chips"
+ depends on MTD_CFI_AMDSTD
+ help
+ Some Macronix flash chips have no/wrong boot-block location in the
+ CFI table, and the driver may detect the type incorrectly. Select
+ this if your board has such chip.
+
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE

74
target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch
View File

@ -1,74 +0,0 @@
Index: linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c
===================================================================
--- linux-2.6.22.1.orig/drivers/mtd/chips/jedec_probe.c
+++ linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c
@@ -121,6 +121,10 @@
#define UPD29F064115 0x221C
/* PMC */
+#define PM39LV512 0x001B
+#define PM39LV010 0x001C
+#define PM39LV020 0x003D
+#define PM39LV040 0x003E
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV512,
+ .name = "PMC Pm39LV512",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+ },
+ .DevSize = SIZE_64KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,16),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV010,
+ .name = "PMC Pm39LV010",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+ },
+ .DevSize = SIZE_128KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,32),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV020,
+ .name = "PMC Pm39LV020",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+ },
+ .DevSize = SIZE_256KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,64),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV040,
+ .name = "PMC Pm39LV040",
+ .uaddr = {
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
+ },
+ .DevSize = SIZE_512KiB,
+ .CmdSet = P_ID_AMD_STD,
+ .NumEraseRegions= 1,
+ .regions = {
+ ERASEINFO(0x01000,128),
+ }
}, {
.mfr_id = MANUFACTURER_PMC,
.dev_id = PM49FL002,

28
target/linux/adm5120/patches-2.6.22/103-mtd_trxsplit.patch
View File

@ -1,28 +0,0 @@
Index: linux-2.6.22.4/drivers/mtd/Kconfig
===================================================================
--- linux-2.6.22.4.orig/drivers/mtd/Kconfig
+++ linux-2.6.22.4/drivers/mtd/Kconfig
@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
depends on MTD_PARTITIONS
default y
+config MTD_TRXSPLIT
+ bool "Automatically find and split TRX partitions"
+ depends on MTD_PARTITIONS
+ default n
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
Index: linux-2.6.22.4/drivers/mtd/Makefile
===================================================================
--- linux-2.6.22.4.orig/drivers/mtd/Makefile
+++ linux-2.6.22.4/drivers/mtd/Makefile
@@ -8,6 +8,7 @@ mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.
obj-$(CONFIG_MTD) += $(mtd-y)
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o

26
target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch
View File

@ -1,26 +0,0 @@
Index: linux-2.6.22.1/arch/mips/kernel/head.S
===================================================================
--- linux-2.6.22.1.orig/arch/mips/kernel/head.S
+++ linux-2.6.22.1/arch/mips/kernel/head.S
@@ -129,14 +129,19 @@
#endif
.endm
-
j kernel_entry
nop
-
+ nop
+
/*
* Reserved space for exception handlers.
* Necessary for machines which link their kernels at KSEG0.
+ * Use as temporary storage for the kernel command line, so that it
+ * can be updated easily without having to relink the kernel.
*/
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
.align 10
EXPORT(stext) # used for profiling

297
target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch
View File

@ -1,297 +0,0 @@
Index: linux/drivers/serial/amba-pl010.c
===================================================================
--- linux.orig/drivers/serial/amba-pl010.c
+++ linux/drivers/serial/amba-pl010.c
@@ -52,11 +52,10 @@
#include <asm/io.h>
-#define UART_NR 8
-
#define SERIAL_AMBA_MAJOR 204
#define SERIAL_AMBA_MINOR 16
-#define SERIAL_AMBA_NR UART_NR
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
#define AMBA_ISR_PASS_LIMIT 256
@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = readl(uap->port.membase + UART010_CR);
cr &= ~UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = readl(uap->port.membase + UART010_CR);
cr |= UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = readl(uap->port.membase + UART010_CR);
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
writel(cr, uap->port.membase + UART010_CR);
}
@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = readl(uap->port.membase + UART010_CR);
cr |= UART010_CR_MSIE;
writel(cr, uap->port.membase + UART010_CR);
}
@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
- status = readb(uap->port.membase + UART01x_FR);
+ status = readl(uap->port.membase + UART01x_FR);
while (UART_RX_DATA(status) && max_count--) {
- ch = readb(uap->port.membase + UART01x_DR);
+ ch = readl(uap->port.membase + UART01x_DR);
flag = TTY_NORMAL;
uap->port.icount.rx++;
@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
* Note that the error handling code is
* out of the main execution path
*/
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
if (unlikely(rsr & UART01x_RSR_ANY)) {
writel(0, uap->port.membase + UART01x_ECR);
@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
- status = readb(uap->port.membase + UART01x_FR);
+ status = readl(uap->port.membase + UART01x_FR);
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
writel(0, uap->port.membase + UART010_ICR);
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
spin_lock(&uap->port.lock);
- status = readb(uap->port.membase + UART010_IIR);
+ status = readl(uap->port.membase + UART010_IIR);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
if (pass_counter-- == 0)
break;
- status = readb(uap->port.membase + UART010_IIR);
+ status = readl(uap->port.membase + UART010_IIR);
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int status = readb(uap->port.membase + UART01x_FR);
+ unsigned int status = readl(uap->port.membase + UART01x_FR);
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
unsigned int result = 0;
unsigned int status;
- status = readb(uap->port.membase + UART01x_FR);
+ status = readl(uap->port.membase + UART01x_FR);
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readb(uap->port.membase + UART010_LCRH);
+ lcr_h = readl(uap->port.membase + UART010_LCRH);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
/*
* initialise the old status of the modem signals
*/
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
/*
* Finally, enable interrupts
@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
- writel(readb(uap->port.membase + UART010_LCRH) &
+ writel(readl(uap->port.membase + UART010_LCRH) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
.verify_port = pl010_verify_port,
};
-static struct uart_amba_port *amba_ports[UART_NR];
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
unsigned int status;
do {
- status = readb(uap->port.membase + UART01x_FR);
+ status = readl(uap->port.membase + UART01x_FR);
barrier();
} while (!UART_TX_READY(status));
writel(ch, uap->port.membase + UART01x_DR);
@@ -567,7 +566,7 @@ pl010_console_write(struct console *co,
/*
* First save the CR then disable the interrupts
*/
- old_cr = readb(uap->port.membase + UART010_CR);
+ old_cr = readl(uap->port.membase + UART010_CR);
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
@@ -577,7 +576,7 @@ pl010_console_write(struct console *co,
* and restore the TCR
*/
do {
- status = readb(uap->port.membase + UART01x_FR);
+ status = readl(uap->port.membase + UART01x_FR);
barrier();
} while (status & UART01x_FR_BUSY);
writel(old_cr, uap->port.membase + UART010_CR);
@@ -589,9 +588,9 @@ static void __init
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, quot;
- lcr_h = readb(uap->port.membase + UART010_LCRH);
+ lcr_h = readl(uap->port.membase + UART010_LCRH);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
else
*bits = 8;
- quot = readb(uap->port.membase + UART010_LCRL) |
- readb(uap->port.membase + UART010_LCRM) << 8;
+ quot = readl(uap->port.membase + UART010_LCRL) |
+ readl(uap->port.membase + UART010_LCRM) << 8;
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
* if so, search for the first available port that does have
* console support.
*/
- if (co->index >= UART_NR)
+ if (co->index >= SERIAL_AMBA_NR)
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
static struct uart_driver amba_reg;
static struct console amba_console = {
- .name = "ttyAM",
+ .name = SERIAL_AMBA_NAME,
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
@@ -659,11 +658,11 @@ static struct console amba_console = {
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyAM",
- .dev_name = "ttyAM",
+ .driver_name = SERIAL_AMBA_NAME,
+ .dev_name = SERIAL_AMBA_NAME,
.major = SERIAL_AMBA_MAJOR,
.minor = SERIAL_AMBA_MINOR,
- .nr = UART_NR,
+ .nr = SERIAL_AMBA_NR,
.cons = AMBA_CONSOLE,
};
Index: linux/drivers/serial/Kconfig
===================================================================
--- linux.orig/drivers/serial/Kconfig
+++ linux/drivers/serial/Kconfig
@@ -293,10 +293,25 @@ config SERIAL_AMBA_PL010
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
- Cirrus Logic EP93xx CPU, say Y or M here.
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
If unsure, say N.
+config SERIAL_AMBA_PL010_NUMPORTS
+ int "Maximum number of AMBA PL010 serial ports"
+ depends on SERIAL_AMBA_PL010
+ default "8"
+ ---help---
+ Set this to the number of serial ports you want the AMBA PL010 driver
+ to support.
+
+config SERIAL_AMBA_PL010_PORTNAME
+ string "Name of the AMBA PL010 serial ports"
+ depends on SERIAL_AMBA_PL010
+ default "ttyAM"
+ ---help---
+ ::: To be written :::
+
config SERIAL_AMBA_PL010_CONSOLE
bool "Support for console on AMBA serial port"
depends on SERIAL_AMBA_PL010=y

15
target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch
View File

@ -1,15 +0,0 @@
Index: linux/drivers/amba/bus.c
===================================================================
--- linux.orig/drivers/amba/bus.c
+++ linux/drivers/amba/bus.c
@@ -17,6 +17,10 @@
#include <asm/io.h>
#include <asm/sizes.h>
+#ifndef NO_IRQ
+#define NO_IRQ (-1)
+#endif
+
#define to_amba_device(d) container_of(d, struct amba_device, dev)
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)

30
target/linux/adm5120/patches-2.6.22/300-i2c_gpio_custom.patch
View File

@ -1,30 +0,0 @@
--- linux-2.6.22.4.orig/drivers/i2c/busses/Kconfig 2007-08-21 06:33:06.000000000 +0200
+++ linux-2.6.22.4/drivers/i2c/busses/Kconfig 2007-10-09 12:53:13.000000000 +0200
@@ -125,6 +125,17 @@
This is a very simple bitbanging I2C driver utilizing the
arch-neutral GPIO API to control the SCL and SDA lines.
+config I2C_GPIO_CUSTOM
+ tristate "Custom GPIO-based I2C driver"
+ depends on GENERIC_GPIO
+ select I2C_GPIO
+ help
+ This is an I2C driver to register 1 to 4 custom I2C buses using
+ GPIO lines.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-gpio-custom.
+
config I2C_HYDRA
tristate "CHRP Apple Hydra Mac I/O I2C interface"
depends on PCI && PPC_CHRP && EXPERIMENTAL
--- linux-2.6.22.4.orig/drivers/i2c/busses/Makefile 2007-08-21 06:33:06.000000000 +0200
+++ linux-2.6.22.4/drivers/i2c/busses/Makefile 2007-10-09 12:07:45.000000000 +0200
@@ -13,6 +13,7 @@
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
+obj-$(CONFIG_I2C_GPIO_CUSTOM) += i2c-gpio-custom.o
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_I810) += i2c-i810.o

11
target/linux/adm5120/patches-2.6.23/006-adm5120_leds.patch
View File

@ -2,16 +2,10 @@ Index: linux-2.6.23/drivers/leds/Kconfig
===================================================================
--- linux-2.6.23.orig/drivers/leds/Kconfig
+++ linux-2.6.23/drivers/leds/Kconfig
@@ -18,6 +18,27 @@ config LEDS_CLASS
@@ -18,6 +18,21 @@ config LEDS_CLASS
comment "LED drivers"
+config LEDS_GPIO
+ tristate "LED support for LEDS on GPIO lines"
+ depends on LEDS_CLASS && GENERIC_GPIO
+ help
+ This option enables support for LEDs connected to GPIO lines
+
+config LEDS_ADM5120
+ tristate "LED Support for ADM5120 GPIO LEDs"
+ depends on LEDS_GPIO && MIPS_ADM5120
@ -34,11 +28,10 @@ Index: linux-2.6.23/drivers/leds/Makefile
===================================================================
--- linux-2.6.23.orig/drivers/leds/Makefile
+++ linux-2.6.23/drivers/leds/Makefile
@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o

23
target/linux/adm5120/router_be/config-2.6.22 → target/linux/adm5120/router_be/config-2.6.23
View File

@ -1,6 +1,5 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_ADM5120_CPU_OVERRIDES=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@ -22,6 +21,7 @@ CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
@ -45,7 +45,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_DDB5477 is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
@ -61,11 +61,11 @@ CONFIG_GENERIC_ACL=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
# CONFIG_GEN_RTC is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HID=m
CONFIG_HID_SUPPORT=y
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_HW_HAS_PCI=y
@ -81,7 +81,7 @@ CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_INPUT=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_TUNNEL=m
@ -94,6 +94,7 @@ CONFIG_LEDS_ADM5120_DIAG=y
CONFIG_LEDS_GPIO=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
@ -105,7 +106,6 @@ CONFIG_MIPS_ADM5120=y
CONFIG_MIPS_ADM5120_ENET=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
@ -113,11 +113,7 @@ CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_ADM5120=y
@ -166,6 +162,7 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_TRXSPLIT=y
CONFIG_NETDEV_1000=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_KEY=y
# CONFIG_NET_PCI is not set
# CONFIG_NET_PKTGEN is not set
@ -173,6 +170,7 @@ CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_GRE=m
# CONFIG_NO_IOPORT is not set
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
@ -180,14 +178,17 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PARTITION_ADVANCED is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_ADM5120=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNPACPI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_RTC is not set
# CONFIG_RTL8187 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_ADM5120 is not set
CONFIG_SERIAL_AMBA_PL010=y
@ -240,11 +241,13 @@ CONFIG_USB_ADM5120_HCD=m
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USER_NS is not set
# CONFIG_VGASTATE is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_ZD1211RW is not set

25
target/linux/adm5120/router_le/config-2.6.22 → target/linux/adm5120/router_le/config-2.6.23
View File

@ -1,6 +1,5 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_ADM5120_CPU_OVERRIDES=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@ -22,6 +21,7 @@ CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
@ -45,7 +45,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_DDB5477 is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
@ -61,11 +61,11 @@ CONFIG_GENERIC_ACL=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
# CONFIG_GEN_RTC is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HID=m
CONFIG_HID_SUPPORT=y
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_HW_HAS_PCI=y
@ -81,7 +81,7 @@ CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_INPUT=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_TUNNEL=m
@ -94,6 +94,7 @@ CONFIG_LEDS_ADM5120_DIAG=y
CONFIG_LEDS_GPIO=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
@ -105,7 +106,6 @@ CONFIG_MIPS_ADM5120=y
CONFIG_MIPS_ADM5120_ENET=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
@ -113,11 +113,7 @@ CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_ADM5120=y
@ -176,6 +172,8 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_TRXSPLIT=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_KEY=y
# CONFIG_NET_PCI is not set
# CONFIG_NET_PKTGEN is not set
@ -183,6 +181,7 @@ CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_GRE=m
# CONFIG_NO_IOPORT is not set
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
@ -190,14 +189,17 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PARTITION_ADVANCED is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_ADM5120=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNPACPI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_RTC is not set
# CONFIG_RTL8187 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_ADM5120 is not set
CONFIG_SERIAL_AMBA_PL010=y
@ -245,7 +247,6 @@ CONFIG_USB_ADM5120_HCD=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_NET_DM9601 is not set
@ -257,8 +258,10 @@ CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USER_NS is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_V4L1=y
CONFIG_VM_EVENT_COUNTERS=y