netifd: add validation support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39621
owl
John Crispin 2014-02-18 13:34:04 +00:00
parent 26e850dafa
commit 8fb44e0d1e
2 changed files with 114 additions and 9 deletions

View File

@ -40,12 +40,117 @@ service_running() {
/sbin/wifi reload_legacy
}
validate_atm_bridge_section()
{
uci_validate_section network "atm-bridge" "${1}" \
'unit:uinteger:0' \
'vci:range(32, 65535):35' \
'vpi:range(0, 255):8' \
'atmdev:uinteger:0' \
'encaps:or("llc", "vc"):llc' \
'payload:or("bridged", "routed"):bridged'
return $?
}
validate_route_section()
{
uci_validate_section network route "${1}" \
'interface:string' \
'target:ip4addr' \
'netmask:ip4prefix' \
'gateway:ip4addr' \
'metric:uinteger' \
'mtu:uinteger' \
'table:range(0,65535)'
return $?
}
validate_route6_section()
{
uci_validate_section network route6 "${1}" \
'interface:string' \
'target:ip6addr' \
'gateway:ip6addr' \
'metric:uinteger' \
'mtu:uinteger' \
'table:range(0,65535)'
return $?
}
validate_rule_section()
{
uci_validate_section network rule "${1}" \
'in:string' \
'out:string' \
'src:ip4prefix' \
'dest:ip4prefix' \
'tos:rage(0.31)' \
'string:mark' \
'invert:bool' \
'lookup:range(0,65535)' \
'goto:range(0,65535)' \
'action:or("prohibit", "unreachable", "blackhole", "throw")'
return $?
}
validate_rule6_section()
{
uci_validate_section network rule6 "${1}" \
'in:string' \
'out:string' \
'src:ip4prefix' \
'dest:ip4prefix' \
'tos:rage(0.31)' \
'string:mark' \
'invert:bool' \
'lookup:range(0,65535)' \
'goto:range(0,65535)' \
'action:or("prohibit", "unreachable", "blackhole", "throw")'
return $?
}
validate_switch_section()
{
uci_validate_section network switch "${1}" \
'name:string' \
'enable:bool' \
'enable_vlan:bool' \
'reset:bool'
return $?
}
validate_switch_vlan()
{
uci_validate_section network switch_vlan "${1}" \
'device:string' \
'vlan:uinteger' \
'ports:list(ports)'
return $?
}
service_triggers()
{
procd_open_trigger
procd_add_config_trigger "config.change" "network" /etc/init.d/network reload
procd_add_config_trigger "config.change" "wireless" /etc/init.d/network reload
procd_close_trigger
procd_open_validate
validate_atm_bridge_section
validate_route_section
validate_route6_section
validate_rule_section
validate_rule6_section
validate_switch_section
validate_switch_vlan
procd_close_validate
}
restart() {

View File

@ -5,15 +5,15 @@
init_proto "$@"
proto_dhcp_init_config() {
proto_config_add_string "ipaddr"
proto_config_add_string "netmask"
proto_config_add_string "hostname"
proto_config_add_string "clientid"
proto_config_add_string "vendorid"
proto_config_add_boolean "broadcast"
proto_config_add_string "reqopts"
proto_config_add_string "iface6rd"
proto_config_add_string "sendopts"
proto_config_add_string 'ipaddr:ipaddr'
proto_config_add_string 'netmask:ipaddr'
proto_config_add_string 'hostname:hostname'
proto_config_add_string clientid
proto_config_add_string vendorid
proto_config_add_boolean 'broadcast:ipaddr'
proto_config_add_string 'reqopts:list(string)'
proto_config_add_string iface6rd
proto_config_add_string sendopts
}
proto_dhcp_setup() {