boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.

SVN-Revision: 24305
owl
Daniel Dickinson 2010-12-07 15:15:54 +00:00
parent 3baa168e09
commit 8f9b14dafe
3 changed files with 141 additions and 2 deletions

View File

@ -19,6 +19,16 @@ brcm63xx_detect() {
brcm63xx_has_reset_button="true"
ifname=eth1
;;
"bcm63xx/GW6000 "*)
brcm63xx_has_reset_button="true"
ifname=eth1
;;
"bcm63xx/GW6200 "*)
status_led="line1"
status_led2="tel"
brcm63xx_has_reset_button="true"
ifname=eth1
;;
"bcm63xx/96348GW-11 "*)
status_led="power"
brcm63xx_has_reset_button="true"

View File

@ -146,9 +146,9 @@ define Image/Build
# RTA1025W_16 (numerous routers)
$(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
# Tecom GW6000
$(call Image/Build/CFE,$(1),96348GW,6348,GW6000)
$(call Image/Build/CFEFIXUP,$(1),96348GW,6348,GW6000)
# Tecom GW6200
$(call Image/Build/CFE,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
$(call Image/Build/CFEFIXUP,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
# Neufbox4
$(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
# Comtrend 536, 5621

View File

@ -0,0 +1,129 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -432,6 +432,117 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_gw6200 = {
+ .name = "GW6200",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ .leds = {
+ {
+ .name = "line1",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "line2",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "line3",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "tel",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "ethernet",
+ .gpio = 35,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ },
+ },
+};
+
+static struct board_info __initdata board_gw6000 = {
+ .name = "GW6000",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ /* GW6000 has no GPIO-controlled leds */
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ },
+ },
+};
+
+
+
static struct board_info __initdata board_FAST2404 = {
.name = "F@ST2404",
.expected_cpu_id = 0x6348,
@@ -1521,6 +1632,8 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,
&board_96348gw,
+ &board_gw6000,
+ &board_gw6200,
&board_96348gw_10,
&board_96348gw_11,
&board_FAST2404,