mac80211: brcmfmac: backport scheduled scan cleanup and chip support

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki 2017-02-02 09:27:20 +01:00
parent e48b1c2c07
commit 85d128f145
18 changed files with 2200 additions and 11 deletions

View File

@ -0,0 +1,490 @@
From be4b092cab84b2ecc01ee7f4da6a044279430b6f Mon Sep 17 00:00:00 2001
From: Franky Lin <franky.lin@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:20 +0000
Subject: [PATCH] brcmfmac: add pcie host dongle interface rev6 support
In rev6 of pcie host dongle interface protocol, host needs to maximum
supported ring number from dongle shared memory and set up ring buffer
and ring indices offset accordingly.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 10 +-
.../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 38 +++--
.../wireless/broadcom/brcm80211/brcmfmac/msgbuf.h | 4 +
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 171 ++++++++++++---------
4 files changed, 132 insertions(+), 91 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -22,10 +22,12 @@
/* IDs of the 6 default common rings of msgbuf protocol */
#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT 0
#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT 1
+#define BRCMF_H2D_MSGRING_FLOWRING_IDSTART 2
#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE 2
#define BRCMF_D2H_MSGRING_TX_COMPLETE 3
#define BRCMF_D2H_MSGRING_RX_COMPLETE 4
+
#define BRCMF_NROF_H2D_COMMON_MSGRINGS 2
#define BRCMF_NROF_D2H_COMMON_MSGRINGS 3
#define BRCMF_NROF_COMMON_MSGRINGS (BRCMF_NROF_H2D_COMMON_MSGRINGS + \
@@ -95,14 +97,18 @@ struct brcmf_bus_ops {
* @flowrings: commonrings which are dynamically created and destroyed for data.
* @rx_dataoffset: if set then all rx data has this this offset.
* @max_rxbufpost: maximum number of buffers to post for rx.
- * @nrof_flowrings: number of flowrings.
+ * @max_flowrings: maximum number of tx flow rings supported.
+ * @max_submissionrings: maximum number of submission rings(h2d) supported.
+ * @max_completionrings: maximum number of completion rings(d2h) supported.
*/
struct brcmf_bus_msgbuf {
struct brcmf_commonring *commonrings[BRCMF_NROF_COMMON_MSGRINGS];
struct brcmf_commonring **flowrings;
u32 rx_dataoffset;
u32 max_rxbufpost;
- u32 nrof_flowrings;
+ u16 max_flowrings;
+ u16 max_submissionrings;
+ u16 max_completionrings;
};
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -87,11 +87,6 @@ struct msgbuf_common_hdr {
__le32 request_id;
};
-struct msgbuf_buf_addr {
- __le32 low_addr;
- __le32 high_addr;
-};
-
struct msgbuf_ioctl_req_hdr {
struct msgbuf_common_hdr msg;
__le32 cmd;
@@ -227,7 +222,10 @@ struct brcmf_msgbuf {
struct brcmf_commonring **commonrings;
struct brcmf_commonring **flowrings;
dma_addr_t *flowring_dma_handle;
- u16 nrof_flowrings;
+
+ u16 max_flowrings;
+ u16 max_submissionrings;
+ u16 max_completionrings;
u16 rx_dataoffset;
u32 max_rxbufpost;
@@ -610,7 +608,7 @@ brcmf_msgbuf_flowring_create_worker(stru
create->msg.request_id = 0;
create->tid = brcmf_flowring_tid(msgbuf->flow, flowid);
create->flow_ring_id = cpu_to_le16(flowid +
- BRCMF_NROF_H2D_COMMON_MSGRINGS);
+ BRCMF_H2D_MSGRING_FLOWRING_IDSTART);
memcpy(create->sa, work->sa, ETH_ALEN);
memcpy(create->da, work->da, ETH_ALEN);
address = (u64)msgbuf->flowring_dma_handle[flowid];
@@ -760,7 +758,7 @@ static void brcmf_msgbuf_txflow_worker(s
u32 flowid;
msgbuf = container_of(worker, struct brcmf_msgbuf, txflow_work);
- for_each_set_bit(flowid, msgbuf->flow_map, msgbuf->nrof_flowrings) {
+ for_each_set_bit(flowid, msgbuf->flow_map, msgbuf->max_flowrings) {
clear_bit(flowid, msgbuf->flow_map);
brcmf_msgbuf_txflow(msgbuf, flowid);
}
@@ -866,7 +864,7 @@ brcmf_msgbuf_process_txstatus(struct brc
tx_status = (struct msgbuf_tx_status *)buf;
idx = le32_to_cpu(tx_status->msg.request_id);
flowid = le16_to_cpu(tx_status->compl_hdr.flow_ring_id);
- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
+ flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
msgbuf->tx_pktids, idx);
if (!skb)
@@ -1174,7 +1172,7 @@ brcmf_msgbuf_process_flow_ring_create_re
flowring_create_resp = (struct msgbuf_flowring_create_resp *)buf;
flowid = le16_to_cpu(flowring_create_resp->compl_hdr.flow_ring_id);
- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
+ flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
status = le16_to_cpu(flowring_create_resp->compl_hdr.status);
if (status) {
@@ -1202,7 +1200,7 @@ brcmf_msgbuf_process_flow_ring_delete_re
flowring_delete_resp = (struct msgbuf_flowring_delete_resp *)buf;
flowid = le16_to_cpu(flowring_delete_resp->compl_hdr.flow_ring_id);
- flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS;
+ flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
status = le16_to_cpu(flowring_delete_resp->compl_hdr.status);
if (status) {
@@ -1307,7 +1305,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct
brcmf_msgbuf_process_rx(msgbuf, buf);
for_each_set_bit(flowid, msgbuf->txstatus_done_map,
- msgbuf->nrof_flowrings) {
+ msgbuf->max_flowrings) {
clear_bit(flowid, msgbuf->txstatus_done_map);
commonring = msgbuf->flowrings[flowid];
qlen = brcmf_flowring_qlen(msgbuf->flow, flowid);
@@ -1349,7 +1347,7 @@ void brcmf_msgbuf_delete_flowring(struct
delete->msg.request_id = 0;
delete->flow_ring_id = cpu_to_le16(flowid +
- BRCMF_NROF_H2D_COMMON_MSGRINGS);
+ BRCMF_H2D_MSGRING_FLOWRING_IDSTART);
delete->reason = 0;
brcmf_dbg(MSGBUF, "Send Flow Delete Req flow ID %d, ifindex %d\n",
@@ -1427,10 +1425,10 @@ int brcmf_proto_msgbuf_attach(struct brc
if_msgbuf = drvr->bus_if->msgbuf;
- if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
+ if (if_msgbuf->max_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
brcmf_err("driver not configured for this many flowrings %d\n",
- if_msgbuf->nrof_flowrings);
- if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
+ if_msgbuf->max_flowrings);
+ if_msgbuf->max_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
}
msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL);
@@ -1443,7 +1441,7 @@ int brcmf_proto_msgbuf_attach(struct brc
goto fail;
}
INIT_WORK(&msgbuf->txflow_work, brcmf_msgbuf_txflow_worker);
- count = BITS_TO_LONGS(if_msgbuf->nrof_flowrings);
+ count = BITS_TO_LONGS(if_msgbuf->max_flowrings);
count = count * sizeof(unsigned long);
msgbuf->flow_map = kzalloc(count, GFP_KERNEL);
if (!msgbuf->flow_map)
@@ -1479,8 +1477,8 @@ int brcmf_proto_msgbuf_attach(struct brc
msgbuf->commonrings =
(struct brcmf_commonring **)if_msgbuf->commonrings;
msgbuf->flowrings = (struct brcmf_commonring **)if_msgbuf->flowrings;
- msgbuf->nrof_flowrings = if_msgbuf->nrof_flowrings;
- msgbuf->flowring_dma_handle = kzalloc(msgbuf->nrof_flowrings *
+ msgbuf->max_flowrings = if_msgbuf->max_flowrings;
+ msgbuf->flowring_dma_handle = kzalloc(msgbuf->max_flowrings *
sizeof(*msgbuf->flowring_dma_handle), GFP_KERNEL);
if (!msgbuf->flowring_dma_handle)
goto fail;
@@ -1501,7 +1499,7 @@ int brcmf_proto_msgbuf_attach(struct brc
goto fail;
msgbuf->flow = brcmf_flowring_attach(drvr->bus_if->dev,
- if_msgbuf->nrof_flowrings);
+ if_msgbuf->max_flowrings);
if (!msgbuf->flow)
goto fail;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h
@@ -31,6 +31,10 @@
#define BRCMF_D2H_MSGRING_RX_COMPLETE_ITEMSIZE 32
#define BRCMF_H2D_TXFLOWRING_ITEMSIZE 48
+struct msgbuf_buf_addr {
+ __le32 low_addr;
+ __le32 high_addr;
+};
int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -135,7 +135,7 @@ static struct brcmf_firmware_mapping brc
BRCMF_PCIE_MB_INT_D2H3_DB1)
#define BRCMF_PCIE_MIN_SHARED_VERSION 5
-#define BRCMF_PCIE_MAX_SHARED_VERSION 5
+#define BRCMF_PCIE_MAX_SHARED_VERSION 6
#define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF
#define BRCMF_PCIE_SHARED_DMA_INDEX 0x10000
#define BRCMF_PCIE_SHARED_DMA_2B_IDX 0x100000
@@ -166,17 +166,6 @@ static struct brcmf_firmware_mapping brc
#define BRCMF_RING_MEM_SZ 16
#define BRCMF_RING_STATE_SZ 8
-#define BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET 4
-#define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET 8
-#define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET 12
-#define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET 16
-#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET 20
-#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET 28
-#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET 36
-#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET 44
-#define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET 0
-#define BRCMF_SHARED_RING_MAX_SUB_QUEUES 52
-
#define BRCMF_DEF_MAX_RXBUFPOST 255
#define BRCMF_CONSOLE_BUFADDR_OFFSET 8
@@ -231,7 +220,9 @@ struct brcmf_pcie_shared_info {
struct brcmf_pcie_ringbuf *commonrings[BRCMF_NROF_COMMON_MSGRINGS];
struct brcmf_pcie_ringbuf *flowrings;
u16 max_rxbufpost;
- u32 nrof_flowrings;
+ u16 max_flowrings;
+ u16 max_submissionrings;
+ u16 max_completionrings;
u32 rx_dataoffset;
u32 htod_mb_data_addr;
u32 dtoh_mb_data_addr;
@@ -241,6 +232,7 @@ struct brcmf_pcie_shared_info {
dma_addr_t scratch_dmahandle;
void *ringupd;
dma_addr_t ringupd_dmahandle;
+ u8 version;
};
struct brcmf_pcie_core_info {
@@ -284,6 +276,36 @@ struct brcmf_pcie_ringbuf {
u8 id;
};
+/**
+ * struct brcmf_pcie_dhi_ringinfo - dongle/host interface shared ring info
+ *
+ * @ringmem: dongle memory pointer to ring memory location
+ * @h2d_w_idx_ptr: h2d ring write indices dongle memory pointers
+ * @h2d_r_idx_ptr: h2d ring read indices dongle memory pointers
+ * @d2h_w_idx_ptr: d2h ring write indices dongle memory pointers
+ * @d2h_r_idx_ptr: d2h ring read indices dongle memory pointers
+ * @h2d_w_idx_hostaddr: h2d ring write indices host memory pointers
+ * @h2d_r_idx_hostaddr: h2d ring read indices host memory pointers
+ * @d2h_w_idx_hostaddr: d2h ring write indices host memory pointers
+ * @d2h_r_idx_hostaddr: d2h ring reaD indices host memory pointers
+ * @max_flowrings: maximum number of tx flow rings supported.
+ * @max_submissionrings: maximum number of submission rings(h2d) supported.
+ * @max_completionrings: maximum number of completion rings(d2h) supported.
+ */
+struct brcmf_pcie_dhi_ringinfo {
+ __le32 ringmem;
+ __le32 h2d_w_idx_ptr;
+ __le32 h2d_r_idx_ptr;
+ __le32 d2h_w_idx_ptr;
+ __le32 d2h_r_idx_ptr;
+ struct msgbuf_buf_addr h2d_w_idx_hostaddr;
+ struct msgbuf_buf_addr h2d_r_idx_hostaddr;
+ struct msgbuf_buf_addr d2h_w_idx_hostaddr;
+ struct msgbuf_buf_addr d2h_r_idx_hostaddr;
+ __le16 max_flowrings;
+ __le16 max_submissionrings;
+ __le16 max_completionrings;
+};
static const u32 brcmf_ring_max_item[BRCMF_NROF_COMMON_MSGRINGS] = {
BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM,
@@ -1054,26 +1076,35 @@ static int brcmf_pcie_init_ringbuffers(s
{
struct brcmf_pcie_ringbuf *ring;
struct brcmf_pcie_ringbuf *rings;
- u32 ring_addr;
u32 d2h_w_idx_ptr;
u32 d2h_r_idx_ptr;
u32 h2d_w_idx_ptr;
u32 h2d_r_idx_ptr;
- u32 addr;
u32 ring_mem_ptr;
u32 i;
u64 address;
u32 bufsz;
- u16 max_sub_queues;
u8 idx_offset;
-
- ring_addr = devinfo->shared.ring_info_addr;
- brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr);
- addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES;
- max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr);
+ struct brcmf_pcie_dhi_ringinfo ringinfo;
+ u16 max_flowrings;
+ u16 max_submissionrings;
+ u16 max_completionrings;
+
+ memcpy_fromio(&ringinfo, devinfo->tcm + devinfo->shared.ring_info_addr,
+ sizeof(ringinfo));
+ if (devinfo->shared.version >= 6) {
+ max_submissionrings = le16_to_cpu(ringinfo.max_submissionrings);
+ max_flowrings = le16_to_cpu(ringinfo.max_flowrings);
+ max_completionrings = le16_to_cpu(ringinfo.max_completionrings);
+ } else {
+ max_submissionrings = le16_to_cpu(ringinfo.max_flowrings);
+ max_flowrings = max_submissionrings -
+ BRCMF_NROF_H2D_COMMON_MSGRINGS;
+ max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
+ }
if (devinfo->dma_idx_sz != 0) {
- bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) *
+ bufsz = (max_submissionrings + max_completionrings) *
devinfo->dma_idx_sz * 2;
devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz,
&devinfo->idxbuf_dmahandle,
@@ -1083,14 +1114,10 @@ static int brcmf_pcie_init_ringbuffers(s
}
if (devinfo->dma_idx_sz == 0) {
- addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET;
- d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
- addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET;
- d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
- addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET;
- h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
- addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET;
- h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+ d2h_w_idx_ptr = le32_to_cpu(ringinfo.d2h_w_idx_ptr);
+ d2h_r_idx_ptr = le32_to_cpu(ringinfo.d2h_r_idx_ptr);
+ h2d_w_idx_ptr = le32_to_cpu(ringinfo.h2d_w_idx_ptr);
+ h2d_r_idx_ptr = le32_to_cpu(ringinfo.h2d_r_idx_ptr);
idx_offset = sizeof(u32);
devinfo->write_ptr = brcmf_pcie_write_tcm16;
devinfo->read_ptr = brcmf_pcie_read_tcm16;
@@ -1103,34 +1130,42 @@ static int brcmf_pcie_init_ringbuffers(s
devinfo->read_ptr = brcmf_pcie_read_idx;
h2d_w_idx_ptr = 0;
- addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET;
address = (u64)devinfo->idxbuf_dmahandle;
- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-
- h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset;
- addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET;
- address += max_sub_queues * idx_offset;
- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
-
- d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset;
- addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET;
- address += max_sub_queues * idx_offset;
- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
+ ringinfo.h2d_w_idx_hostaddr.low_addr =
+ cpu_to_le32(address & 0xffffffff);
+ ringinfo.h2d_w_idx_hostaddr.high_addr =
+ cpu_to_le32(address >> 32);
+
+ h2d_r_idx_ptr = h2d_w_idx_ptr +
+ max_submissionrings * idx_offset;
+ address += max_submissionrings * idx_offset;
+ ringinfo.h2d_r_idx_hostaddr.low_addr =
+ cpu_to_le32(address & 0xffffffff);
+ ringinfo.h2d_r_idx_hostaddr.high_addr =
+ cpu_to_le32(address >> 32);
+
+ d2h_w_idx_ptr = h2d_r_idx_ptr +
+ max_submissionrings * idx_offset;
+ address += max_submissionrings * idx_offset;
+ ringinfo.d2h_w_idx_hostaddr.low_addr =
+ cpu_to_le32(address & 0xffffffff);
+ ringinfo.d2h_w_idx_hostaddr.high_addr =
+ cpu_to_le32(address >> 32);
d2h_r_idx_ptr = d2h_w_idx_ptr +
- BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
- addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET;
- address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset;
- brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff);
- brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32);
+ max_completionrings * idx_offset;
+ address += max_completionrings * idx_offset;
+ ringinfo.d2h_r_idx_hostaddr.low_addr =
+ cpu_to_le32(address & 0xffffffff);
+ ringinfo.d2h_r_idx_hostaddr.high_addr =
+ cpu_to_le32(address >> 32);
+
+ memcpy_toio(devinfo->tcm + devinfo->shared.ring_info_addr,
+ &ringinfo, sizeof(ringinfo));
brcmf_dbg(PCIE, "Using host memory indices\n");
}
- addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET;
- ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr);
+ ring_mem_ptr = le32_to_cpu(ringinfo.ringmem);
for (i = 0; i < BRCMF_NROF_H2D_COMMON_MSGRINGS; i++) {
ring = brcmf_pcie_alloc_dma_and_ring(devinfo, i, ring_mem_ptr);
@@ -1161,20 +1196,19 @@ static int brcmf_pcie_init_ringbuffers(s
ring_mem_ptr += BRCMF_RING_MEM_SZ;
}
- devinfo->shared.nrof_flowrings =
- max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS;
- rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring),
- GFP_KERNEL);
+ devinfo->shared.max_flowrings = max_flowrings;
+ devinfo->shared.max_submissionrings = max_submissionrings;
+ devinfo->shared.max_completionrings = max_completionrings;
+ rings = kcalloc(max_flowrings, sizeof(*ring), GFP_KERNEL);
if (!rings)
goto fail;
- brcmf_dbg(PCIE, "Nr of flowrings is %d\n",
- devinfo->shared.nrof_flowrings);
+ brcmf_dbg(PCIE, "Nr of flowrings is %d\n", max_flowrings);
- for (i = 0; i < devinfo->shared.nrof_flowrings; i++) {
+ for (i = 0; i < max_flowrings; i++) {
ring = &rings[i];
ring->devinfo = devinfo;
- ring->id = i + BRCMF_NROF_COMMON_MSGRINGS;
+ ring->id = i + BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
brcmf_commonring_register_cb(&ring->commonring,
brcmf_pcie_ring_mb_ring_bell,
brcmf_pcie_ring_mb_update_rptr,
@@ -1357,17 +1391,16 @@ brcmf_pcie_init_share_ram_info(struct br
{
struct brcmf_pcie_shared_info *shared;
u32 addr;
- u32 version;
shared = &devinfo->shared;
shared->tcm_base_address = sharedram_addr;
shared->flags = brcmf_pcie_read_tcm32(devinfo, sharedram_addr);
- version = shared->flags & BRCMF_PCIE_SHARED_VERSION_MASK;
- brcmf_dbg(PCIE, "PCIe protocol version %d\n", version);
- if ((version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
- (version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
- brcmf_err("Unsupported PCIE version %d\n", version);
+ shared->version = (u8)(shared->flags & BRCMF_PCIE_SHARED_VERSION_MASK);
+ brcmf_dbg(PCIE, "PCIe protocol version %d\n", shared->version);
+ if ((shared->version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
+ (shared->version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
+ brcmf_err("Unsupported PCIE version %d\n", shared->version);
return -EINVAL;
}
@@ -1661,18 +1694,18 @@ static void brcmf_pcie_setup(struct devi
bus->msgbuf->commonrings[i] =
&devinfo->shared.commonrings[i]->commonring;
- flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings),
+ flowrings = kcalloc(devinfo->shared.max_flowrings, sizeof(*flowrings),
GFP_KERNEL);
if (!flowrings)
goto fail;
- for (i = 0; i < devinfo->shared.nrof_flowrings; i++)
+ for (i = 0; i < devinfo->shared.max_flowrings; i++)
flowrings[i] = &devinfo->shared.flowrings[i].commonring;
bus->msgbuf->flowrings = flowrings;
bus->msgbuf->rx_dataoffset = devinfo->shared.rx_dataoffset;
bus->msgbuf->max_rxbufpost = devinfo->shared.max_rxbufpost;
- bus->msgbuf->nrof_flowrings = devinfo->shared.nrof_flowrings;
+ bus->msgbuf->max_flowrings = devinfo->shared.max_flowrings;
init_waitqueue_head(&devinfo->mbdata_resp_wait);

View File

@ -0,0 +1,39 @@
From dc630dc5c753ccba97ce174f9c2894f802f9bd93 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:21 +0000
Subject: [PATCH] brcmfmac: add support for 43341 chip
This chip was already supported, but seems a device came up giving
a different chip identifier. So adding that effectively mapping to
the same firmware file as for 43340 chip.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -621,6 +621,7 @@ static struct brcmf_firmware_mapping brc
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362),
BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -36,6 +36,7 @@
#define BRCM_CC_4330_CHIP_ID 0x4330
#define BRCM_CC_4334_CHIP_ID 0x4334
#define BRCM_CC_43340_CHIP_ID 43340
+#define BRCM_CC_43341_CHIP_ID 43341
#define BRCM_CC_43362_CHIP_ID 43362
#define BRCM_CC_4335_CHIP_ID 0x4335
#define BRCM_CC_4339_CHIP_ID 0x4339

View File

@ -0,0 +1,319 @@
From ac55136f43d3336c7b40238b779c404008229929 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:22 +0000
Subject: [PATCH] brcmfmac: move pno helper functions in separate source file
Introducing new source file for pno related functionality. Moving
existing pno functions.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../wireless/broadcom/brcm80211/brcmfmac/Makefile | 3 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 93 ++-----------------
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 100 +++++++++++++++++++++
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 40 +++++++++
4 files changed, 150 insertions(+), 86 deletions(-)
create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
@@ -35,7 +35,8 @@ brcmfmac-objs += \
firmware.o \
feature.o \
btcoex.o \
- vendor.o
+ vendor.o \
+ pno.o
brcmfmac-$(CPTCFG_BRCMFMAC_PROTO_BCDC) += \
bcdc.o
brcmfmac-$(CPTCFG_BRCMFMAC_PROTO_MSGBUF) += \
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -32,6 +32,7 @@
#include "fwil_types.h"
#include "p2p.h"
#include "btcoex.h"
+#include "pno.h"
#include "cfg80211.h"
#include "feature.h"
#include "fwil.h"
@@ -41,16 +42,6 @@
#include "common.h"
#define BRCMF_SCAN_IE_LEN_MAX 2048
-#define BRCMF_PNO_VERSION 2
-#define BRCMF_PNO_TIME 30
-#define BRCMF_PNO_REPEAT 4
-#define BRCMF_PNO_FREQ_EXPO_MAX 3
-#define BRCMF_PNO_MAX_PFN_COUNT 16
-#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
-#define BRCMF_PNO_HIDDEN_BIT 2
-#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
-#define BRCMF_PNO_SCAN_COMPLETE 1
-#define BRCMF_PNO_SCAN_INCOMPLETE 0
#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
#define WPA_OUI_TYPE 1
@@ -3323,76 +3314,6 @@ out_err:
return err;
}
-static int brcmf_dev_pno_clean(struct net_device *ndev)
-{
- int ret;
-
- /* Disable pfn */
- ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "pfn", 0);
- if (ret == 0) {
- /* clear pfn */
- ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "pfnclear",
- NULL, 0);
- }
- if (ret < 0)
- brcmf_err("failed code %d\n", ret);
-
- return ret;
-}
-
-static int brcmf_dev_pno_config(struct brcmf_if *ifp,
- struct cfg80211_sched_scan_request *request)
-{
- struct brcmf_pno_param_le pfn_param;
- struct brcmf_pno_macaddr_le pfn_mac;
- s32 err;
- u8 *mac_mask;
- int i;
-
- memset(&pfn_param, 0, sizeof(pfn_param));
- pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
-
- /* set extra pno params */
- pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
- pfn_param.repeat = BRCMF_PNO_REPEAT;
- pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
-
- /* set up pno scan fr */
- pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
-
- err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
- sizeof(pfn_param));
- if (err) {
- brcmf_err("pfn_set failed, err=%d\n", err);
- return err;
- }
-
- /* Find out if mac randomization should be turned on */
- if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
- return 0;
-
- pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
- pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
-
- memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
- mac_mask = request->mac_addr_mask;
- for (i = 0; i < ETH_ALEN; i++) {
- pfn_mac.mac[i] &= mac_mask[i];
- pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
- }
- /* Clear multi bit */
- pfn_mac.mac[0] &= 0xFE;
- /* Set locally administered */
- pfn_mac.mac[0] |= 0x02;
-
- err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
- sizeof(pfn_mac));
- if (err)
- brcmf_err("pfn_macaddr failed, err=%d\n", err);
-
- return err;
-}
-
static int
brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
struct net_device *ndev,
@@ -3436,15 +3357,16 @@ brcmf_cfg80211_sched_scan_start(struct w
if (request->n_match_sets > 0) {
/* clean up everything */
- ret = brcmf_dev_pno_clean(ndev);
+ ret = brcmf_pno_clean(ifp);
if (ret < 0) {
brcmf_err("failed error=%d\n", ret);
return ret;
}
/* configure pno */
- if (brcmf_dev_pno_config(ifp, request))
- return -EINVAL;
+ ret = brcmf_pno_config(ifp, request);
+ if (ret < 0)
+ return ret;
/* configure each match set */
for (i = 0; i < request->n_match_sets; i++) {
@@ -3486,11 +3408,12 @@ static int brcmf_cfg80211_sched_scan_sto
struct net_device *ndev)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct brcmf_if *ifp = netdev_priv(ndev);
brcmf_dbg(SCAN, "enter\n");
- brcmf_dev_pno_clean(ndev);
+ brcmf_pno_clean(ifp);
if (cfg->sched_escan)
- brcmf_notify_escan_complete(cfg, netdev_priv(ndev), true, true);
+ brcmf_notify_escan_complete(cfg, ifp, true, true);
return 0;
}
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2016 Broadcom
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/netdevice.h>
+#include <net/cfg80211.h>
+
+#include "core.h"
+#include "debug.h"
+#include "pno.h"
+#include "fwil.h"
+#include "fwil_types.h"
+
+#define BRCMF_PNO_VERSION 2
+#define BRCMF_PNO_TIME 30
+#define BRCMF_PNO_REPEAT 4
+#define BRCMF_PNO_FREQ_EXPO_MAX 3
+#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
+#define BRCMF_PNO_SCAN_INCOMPLETE 0
+
+int brcmf_pno_clean(struct brcmf_if *ifp)
+{
+ int ret;
+
+ /* Disable pfn */
+ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
+ if (ret == 0) {
+ /* clear pfn */
+ ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
+ }
+ if (ret < 0)
+ brcmf_err("failed code %d\n", ret);
+
+ return ret;
+}
+
+int brcmf_pno_config(struct brcmf_if *ifp,
+ struct cfg80211_sched_scan_request *request)
+{
+ struct brcmf_pno_param_le pfn_param;
+ struct brcmf_pno_macaddr_le pfn_mac;
+ s32 err;
+ u8 *mac_mask;
+ int i;
+
+ memset(&pfn_param, 0, sizeof(pfn_param));
+ pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
+
+ /* set extra pno params */
+ pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
+ pfn_param.repeat = BRCMF_PNO_REPEAT;
+ pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
+
+ /* set up pno scan fr */
+ pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
+
+ err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
+ sizeof(pfn_param));
+ if (err) {
+ brcmf_err("pfn_set failed, err=%d\n", err);
+ return err;
+ }
+
+ /* Find out if mac randomization should be turned on */
+ if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
+ return 0;
+
+ pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
+ pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
+
+ memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
+ mac_mask = request->mac_addr_mask;
+ for (i = 0; i < ETH_ALEN; i++) {
+ pfn_mac.mac[i] &= mac_mask[i];
+ pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
+ }
+ /* Clear multi bit */
+ pfn_mac.mac[0] &= 0xFE;
+ /* Set locally administered */
+ pfn_mac.mac[0] |= 0x02;
+
+ err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
+ sizeof(pfn_mac));
+ if (err)
+ brcmf_err("pfn_macaddr failed, err=%d\n", err);
+
+ return err;
+}
+
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2016 Broadcom
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _BRCMF_PNO_H
+#define _BRCMF_PNO_H
+
+#define BRCMF_PNO_SCAN_COMPLETE 1
+#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+#define BRCMF_PNO_HIDDEN_BIT 2
+#define BRCMF_PNO_MAX_PFN_COUNT 16
+
+/**
+ * brcmf_pno_clean - disable and clear pno in firmware.
+ *
+ * @ifp: interface object used.
+ */
+int brcmf_pno_clean(struct brcmf_if *ifp);
+
+/**
+ * brcmf_pno_config - configure pno parameters.
+ *
+ * @ifp: interface object used.
+ * @request: scheduled scan parameters.
+ */
+int brcmf_pno_config(struct brcmf_if *ifp,
+ struct cfg80211_sched_scan_request *request);
+
+#endif /* _BRCMF_PNO_H */

View File

@ -0,0 +1,221 @@
From 3e2e86ab19c2a43953de30089c5411c580ddb5f7 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:23 +0000
Subject: [PATCH] brcmfmac: fix handling ssids in .sched_scan_start() callback
The ssids list in the scheduled scan request were not properly taken
into account when configuring in firmware. The hidden bit was set for
any ssid resulting in active scanning for all. Only set it for ssids
that are in the ssids list.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 103 ++++++++++-----------
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 18 ++++
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 12 ++-
3 files changed, 76 insertions(+), 57 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3314,19 +3314,37 @@ out_err:
return err;
}
+static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
+ struct cfg80211_sched_scan_request *req)
+{
+ int i;
+
+ if (!ssid || !req->ssids || !req->n_ssids)
+ return false;
+
+ for (i = 0; i < req->n_ssids; i++) {
+ if (ssid->ssid_len == req->ssids[i].ssid_len) {
+ if (!strncmp(ssid->ssid, req->ssids[i].ssid,
+ ssid->ssid_len))
+ return true;
+ }
+ }
+ return false;
+}
+
static int
brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
struct net_device *ndev,
- struct cfg80211_sched_scan_request *request)
+ struct cfg80211_sched_scan_request *req)
{
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
- struct brcmf_pno_net_param_le pfn;
+ struct cfg80211_ssid *ssid;
int i;
int ret = 0;
brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
- request->n_match_sets, request->n_ssids);
+ req->n_match_sets, req->n_ssids);
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
return -EAGAIN;
@@ -3337,71 +3355,46 @@ brcmf_cfg80211_sched_scan_start(struct w
return -EAGAIN;
}
- if (!request->n_ssids || !request->n_match_sets) {
- brcmf_dbg(SCAN, "Invalid sched scan req!! n_ssids:%d\n",
- request->n_ssids);
+ if (req->n_match_sets <= 0) {
+ brcmf_dbg(SCAN, "invalid number of matchsets specified: %d\n",
+ req->n_match_sets);
return -EINVAL;
}
- if (request->n_ssids > 0) {
- for (i = 0; i < request->n_ssids; i++) {
- /* Active scan req for ssids */
- brcmf_dbg(SCAN, ">>> Active scan req for ssid (%s)\n",
- request->ssids[i].ssid);
-
- /* match_set ssids is a supert set of n_ssid list,
- * so we need not add these set separately.
- */
- }
+ /* clean up everything */
+ ret = brcmf_pno_clean(ifp);
+ if (ret < 0) {
+ brcmf_err("failed error=%d\n", ret);
+ return ret;
}
- if (request->n_match_sets > 0) {
- /* clean up everything */
- ret = brcmf_pno_clean(ifp);
- if (ret < 0) {
- brcmf_err("failed error=%d\n", ret);
- return ret;
+ /* configure pno */
+ ret = brcmf_pno_config(ifp, req);
+ if (ret < 0)
+ return ret;
+
+ /* configure each match set */
+ for (i = 0; i < req->n_match_sets; i++) {
+
+ ssid = &req->match_sets[i].ssid;
+
+ if (!ssid->ssid_len) {
+ brcmf_err("skip broadcast ssid\n");
+ continue;
}
- /* configure pno */
- ret = brcmf_pno_config(ifp, request);
+ ret = brcmf_pno_add_ssid(ifp, ssid,
+ brcmf_is_ssid_active(ssid, req));
if (ret < 0)
- return ret;
-
- /* configure each match set */
- for (i = 0; i < request->n_match_sets; i++) {
- struct cfg80211_ssid *ssid;
- u32 ssid_len;
-
- ssid = &request->match_sets[i].ssid;
- ssid_len = ssid->ssid_len;
-
- if (!ssid_len) {
- brcmf_err("skip broadcast ssid\n");
- continue;
- }
- pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
- pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
- pfn.wsec = cpu_to_le32(0);
- pfn.infra = cpu_to_le32(1);
- pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
- pfn.ssid.SSID_len = cpu_to_le32(ssid_len);
- memcpy(pfn.ssid.SSID, ssid->ssid, ssid_len);
- ret = brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn,
- sizeof(pfn));
brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
ret == 0 ? "set" : "failed", ssid->ssid);
- }
- /* Enable the PNO */
- if (brcmf_fil_iovar_int_set(ifp, "pfn", 1) < 0) {
- brcmf_err("PNO enable failed!! ret=%d\n", ret);
- return -EINVAL;
- }
- } else {
- return -EINVAL;
}
+ /* Enable the PNO */
+ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
+ if (ret < 0)
+ brcmf_err("PNO enable failed!! ret=%d\n", ret);
- return 0;
+ return ret;
}
static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -28,6 +28,8 @@
#define BRCMF_PNO_FREQ_EXPO_MAX 3
#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
#define BRCMF_PNO_SCAN_INCOMPLETE 0
+#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+#define BRCMF_PNO_HIDDEN_BIT 2
int brcmf_pno_clean(struct brcmf_if *ifp)
{
@@ -98,3 +100,19 @@ int brcmf_pno_config(struct brcmf_if *if
return err;
}
+int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+ bool active)
+{
+ struct brcmf_pno_net_param_le pfn;
+
+ pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
+ pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
+ pfn.wsec = cpu_to_le32(0);
+ pfn.infra = cpu_to_le32(1);
+ if (active)
+ pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
+ pfn.ssid.SSID_len = cpu_to_le32(ssid->ssid_len);
+ memcpy(pfn.ssid.SSID, ssid->ssid, ssid->ssid_len);
+ return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
+}
+
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
@@ -17,8 +17,6 @@
#define _BRCMF_PNO_H
#define BRCMF_PNO_SCAN_COMPLETE 1
-#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
-#define BRCMF_PNO_HIDDEN_BIT 2
#define BRCMF_PNO_MAX_PFN_COUNT 16
/**
@@ -37,4 +35,14 @@ int brcmf_pno_clean(struct brcmf_if *ifp
int brcmf_pno_config(struct brcmf_if *ifp,
struct cfg80211_sched_scan_request *request);
+/**
+ * brcmf_pno_add_ssid - add ssid for pno in firmware.
+ *
+ * @ifp: interface object used.
+ * @ssid: ssid information.
+ * @active: indicate this ssid needs to be actively probed.
+ */
+int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+ bool active);
+
#endif /* _BRCMF_PNO_H */

View File

@ -0,0 +1,58 @@
From ab5981c830339b945ddbedc314567a9e5f506d72 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:24 +0000
Subject: [PATCH] brcmfmac: change prototype for brcmf_do_escan()
Reduce the number of parameters as the removed ones can be obtained
through struct brcmf_if parameter.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1080,9 +1080,9 @@ exit:
}
static s32
-brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy,
- struct brcmf_if *ifp, struct cfg80211_scan_request *request)
+brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
{
+ struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
s32 err;
u32 passive_scan;
struct brcmf_scan_results *results;
@@ -1090,7 +1090,7 @@ brcmf_do_escan(struct brcmf_cfg80211_inf
brcmf_dbg(SCAN, "Enter\n");
escan->ifp = ifp;
- escan->wiphy = wiphy;
+ escan->wiphy = cfg->wiphy;
escan->escan_state = WL_ESCAN_STATE_SCANNING;
passive_scan = cfg->active_scan ? 0 : 1;
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
@@ -1170,7 +1170,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy
if (err)
goto scan_out;
- err = brcmf_do_escan(cfg, wiphy, vif->ifp, request);
+ err = brcmf_do_escan(vif->ifp, request);
if (err)
goto scan_out;
} else {
@@ -3289,7 +3289,7 @@ brcmf_notify_sched_scan_results(struct b
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
cfg->escan_info.run = brcmf_run_escan;
- err = brcmf_do_escan(cfg, wiphy, ifp, request);
+ err = brcmf_do_escan(ifp, request);
if (err) {
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
goto out_err;

View File

@ -0,0 +1,306 @@
From fa85b30a908455ff25def3a5f319aad272ef4862 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:25 +0000
Subject: [PATCH] brcmfmac: make internal escan more generic
For scheduled scan we initiate an escan in firmware to obtain more
info missing from the scheduled scan notification we get from firmware.
For upcoming functionality this is also required so make it a bit
more generic.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 187 ++++++++++++---------
.../broadcom/brcm80211/brcmfmac/cfg80211.h | 4 +-
2 files changed, 109 insertions(+), 82 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -757,12 +757,12 @@ s32 brcmf_notify_escan_complete(struct b
brcmf_scan_config_mpc(ifp, 1);
/*
- * e-scan can be initiated by scheduled scan
+ * e-scan can be initiated internally
* which takes precedence.
*/
- if (cfg->sched_escan) {
+ if (cfg->internal_escan) {
brcmf_dbg(SCAN, "scheduled scan completed\n");
- cfg->sched_escan = false;
+ cfg->internal_escan = false;
if (!aborted)
cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
} else if (scan_request) {
@@ -3013,7 +3013,7 @@ void brcmf_abort_scanning(struct brcmf_c
struct escan_info *escan = &cfg->escan_info;
set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status);
- if (cfg->scan_request) {
+ if (cfg->internal_escan || cfg->scan_request) {
escan->escan_state = WL_ESCAN_STATE_IDLE;
brcmf_notify_escan_complete(cfg, escan->ifp, true, true);
}
@@ -3036,7 +3036,7 @@ static void brcmf_escan_timeout(unsigned
struct brcmf_cfg80211_info *cfg =
(struct brcmf_cfg80211_info *)data;
- if (cfg->scan_request) {
+ if (cfg->internal_escan || cfg->scan_request) {
brcmf_err("timer expired\n");
schedule_work(&cfg->escan_timeout_work);
}
@@ -3119,7 +3119,7 @@ brcmf_cfg80211_escan_handler(struct brcm
if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le))
goto exit;
- if (!cfg->scan_request) {
+ if (!cfg->internal_escan && !cfg->scan_request) {
brcmf_dbg(SCAN, "result without cfg80211 request\n");
goto exit;
}
@@ -3165,7 +3165,7 @@ brcmf_cfg80211_escan_handler(struct brcm
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE;
if (brcmf_p2p_scan_finding_common_channel(cfg, NULL))
goto exit;
- if (cfg->scan_request) {
+ if (cfg->internal_escan || cfg->scan_request) {
brcmf_inform_bss(cfg);
aborted = status != BRCMF_E_STATUS_SUCCESS;
brcmf_notify_escan_complete(cfg, ifp, aborted, false);
@@ -3190,6 +3190,73 @@ static void brcmf_init_escan(struct brcm
brcmf_cfg80211_escan_timeout_worker);
}
+static struct cfg80211_scan_request *
+brcmf_alloc_internal_escan_request(struct wiphy *wiphy, u32 n_netinfo) {
+ struct cfg80211_scan_request *req;
+ size_t req_size;
+
+ req_size = sizeof(*req) +
+ n_netinfo * sizeof(req->channels[0]) +
+ n_netinfo * sizeof(*req->ssids);
+
+ req = kzalloc(req_size, GFP_KERNEL);
+ if (req) {
+ req->wiphy = wiphy;
+ req->ssids = (void *)(&req->channels[0]) +
+ n_netinfo * sizeof(req->channels[0]);
+ }
+ return req;
+}
+
+static int brcmf_internal_escan_add_info(struct cfg80211_scan_request *req,
+ u8 *ssid, u8 ssid_len, u8 channel)
+{
+ struct ieee80211_channel *chan;
+ enum nl80211_band band;
+ int freq;
+
+ if (channel <= CH_MAX_2G_CHANNEL)
+ band = NL80211_BAND_2GHZ;
+ else
+ band = NL80211_BAND_5GHZ;
+
+ freq = ieee80211_channel_to_frequency(channel, band);
+ if (!freq)
+ return -EINVAL;
+
+ chan = ieee80211_get_channel(req->wiphy, freq);
+ if (!chan)
+ return -EINVAL;
+
+ req->channels[req->n_channels++] = chan;
+ memcpy(req->ssids[req->n_ssids].ssid, ssid, ssid_len);
+ req->ssids[req->n_ssids++].ssid_len = ssid_len;
+
+ return 0;
+}
+
+static int brcmf_start_internal_escan(struct brcmf_if *ifp,
+ struct cfg80211_scan_request *request)
+{
+ struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
+ int err;
+
+ if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+ /* Abort any on-going scan */
+ brcmf_abort_scanning(cfg);
+ }
+
+ set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+ cfg->escan_info.run = brcmf_run_escan;
+ err = brcmf_do_escan(ifp, request);
+ if (err) {
+ clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+ return err;
+ }
+ cfg->internal_escan = true;
+ return 0;
+}
+
/* PFN result doesn't have all the info which are required by the supplicant
* (For e.g IEs) Do a target Escan so that sched scan results are reported
* via wl_inform_single_bss in the required format. Escan does require the
@@ -3203,12 +3270,8 @@ brcmf_notify_sched_scan_results(struct b
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
struct brcmf_pno_net_info_le *netinfo, *netinfo_start;
struct cfg80211_scan_request *request = NULL;
- struct cfg80211_ssid *ssid = NULL;
- struct ieee80211_channel *channel = NULL;
struct wiphy *wiphy = cfg_to_wiphy(cfg);
- int err = 0;
- int channel_req = 0;
- int band = 0;
+ int i, err = 0;
struct brcmf_pno_scanresults_le *pfn_result;
u32 result_count;
u32 status;
@@ -3234,83 +3297,47 @@ brcmf_notify_sched_scan_results(struct b
*/
WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
- if (result_count > 0) {
- int i;
-
- request = kzalloc(sizeof(*request), GFP_KERNEL);
- ssid = kcalloc(result_count, sizeof(*ssid), GFP_KERNEL);
- channel = kcalloc(result_count, sizeof(*channel), GFP_KERNEL);
- if (!request || !ssid || !channel) {
- err = -ENOMEM;
- goto out_err;
- }
+ if (!result_count) {
+ brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
+ goto out_err;
+ }
+ request = brcmf_alloc_internal_escan_request(wiphy,
+ result_count);
+ if (!request) {
+ err = -ENOMEM;
+ goto out_err;
+ }
- request->wiphy = wiphy;
- data += sizeof(struct brcmf_pno_scanresults_le);
- netinfo_start = (struct brcmf_pno_net_info_le *)data;
-
- for (i = 0; i < result_count; i++) {
- netinfo = &netinfo_start[i];
- if (!netinfo) {
- brcmf_err("Invalid netinfo ptr. index: %d\n",
- i);
- err = -EINVAL;
- goto out_err;
- }
+ data += sizeof(struct brcmf_pno_scanresults_le);
+ netinfo_start = (struct brcmf_pno_net_info_le *)data;
- brcmf_dbg(SCAN, "SSID:%s Channel:%d\n",
- netinfo->SSID, netinfo->channel);
- memcpy(ssid[i].ssid, netinfo->SSID, netinfo->SSID_len);
- ssid[i].ssid_len = netinfo->SSID_len;
- request->n_ssids++;
-
- channel_req = netinfo->channel;
- if (channel_req <= CH_MAX_2G_CHANNEL)
- band = NL80211_BAND_2GHZ;
- else
- band = NL80211_BAND_5GHZ;
- channel[i].center_freq =
- ieee80211_channel_to_frequency(channel_req,
- band);
- channel[i].band = band;
- channel[i].flags |= IEEE80211_CHAN_NO_HT40;
- request->channels[i] = &channel[i];
- request->n_channels++;
- }
-
- /* assign parsed ssid array */
- if (request->n_ssids)
- request->ssids = &ssid[0];
-
- if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
- /* Abort any on-going scan */
- brcmf_abort_scanning(cfg);
+ for (i = 0; i < result_count; i++) {
+ netinfo = &netinfo_start[i];
+ if (!netinfo) {
+ brcmf_err("Invalid netinfo ptr. index: %d\n",
+ i);
+ err = -EINVAL;
+ goto out_err;
}
- set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
- cfg->escan_info.run = brcmf_run_escan;
- err = brcmf_do_escan(ifp, request);
- if (err) {
- clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
+ brcmf_dbg(SCAN, "SSID:%.32s Channel:%d\n",
+ netinfo->SSID, netinfo->channel);
+ err = brcmf_internal_escan_add_info(request,
+ netinfo->SSID,
+ netinfo->SSID_len,
+ netinfo->channel);
+ if (err)
goto out_err;
- }
- cfg->sched_escan = true;
- cfg->scan_request = request;
- } else {
- brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
- goto out_err;
}
- kfree(ssid);
- kfree(channel);
- kfree(request);
- return 0;
+ err = brcmf_start_internal_escan(ifp, request);
+ if (!err)
+ goto free_req;
out_err:
- kfree(ssid);
- kfree(channel);
- kfree(request);
cfg80211_sched_scan_stopped(wiphy);
+free_req:
+ kfree(request);
return err;
}
@@ -3405,7 +3432,7 @@ static int brcmf_cfg80211_sched_scan_sto
brcmf_dbg(SCAN, "enter\n");
brcmf_pno_clean(ifp);
- if (cfg->sched_escan)
+ if (cfg->internal_escan)
brcmf_notify_escan_complete(cfg, ifp, true, true);
return 0;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -271,7 +271,7 @@ struct brcmf_cfg80211_wowl {
* @pub: common driver information.
* @channel: current channel.
* @active_scan: current scan mode.
- * @sched_escan: e-scan for scheduled scan support running.
+ * @internal_escan: indicates internally initiated e-scan is running.
* @ibss_starter: indicates this sta is ibss starter.
* @pwr_save: indicate whether dongle to support power save mode.
* @dongle_up: indicate whether dongle up or not.
@@ -303,7 +303,7 @@ struct brcmf_cfg80211_info {
struct brcmf_pub *pub;
u32 channel;
bool active_scan;
- bool sched_escan;
+ bool internal_escan;
bool ibss_starter;
bool pwr_save;
bool dongle_up;

View File

@ -0,0 +1,176 @@
From fca6cb2f059e51dec3fcf3589a5abbbcce5b4043 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:26 +0000
Subject: [PATCH] brcmfmac: split up brcmf_pno_config() function
The brcmf_pno_config() function handles two configurations in
firmware. Split it and have caller sort out what is needed.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 11 +++-
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 60 ++++++++++++++++------
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 17 ++++--
3 files changed, 68 insertions(+), 20 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -42,6 +42,7 @@
#include "common.h"
#define BRCMF_SCAN_IE_LEN_MAX 2048
+#define BRCMF_SCHED_SCAN_PERIOD 30
#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
#define WPA_OUI_TYPE 1
@@ -3396,10 +3397,18 @@ brcmf_cfg80211_sched_scan_start(struct w
}
/* configure pno */
- ret = brcmf_pno_config(ifp, req);
+ ret = brcmf_pno_config(ifp, BRCMF_SCHED_SCAN_PERIOD, 0, 0);
if (ret < 0)
return ret;
+ /* configure random mac */
+ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+ ret = brcmf_pno_set_random(ifp, req->mac_addr,
+ req->mac_addr_mask);
+ if (ret < 0)
+ return ret;
+ }
+
/* configure each match set */
for (i = 0; i < req->n_match_sets; i++) {
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -23,10 +23,12 @@
#include "fwil_types.h"
#define BRCMF_PNO_VERSION 2
-#define BRCMF_PNO_TIME 30
#define BRCMF_PNO_REPEAT 4
#define BRCMF_PNO_FREQ_EXPO_MAX 3
+#define BRCMF_PNO_IMMEDIATE_SCAN_BIT 3
+#define BRCMF_PNO_ENABLE_BD_SCAN_BIT 5
#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
+#define BRCMF_PNO_REPORT_SEPARATELY_BIT 11
#define BRCMF_PNO_SCAN_INCOMPLETE 0
#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
#define BRCMF_PNO_HIDDEN_BIT 2
@@ -47,42 +49,68 @@ int brcmf_pno_clean(struct brcmf_if *ifp
return ret;
}
-int brcmf_pno_config(struct brcmf_if *ifp,
- struct cfg80211_sched_scan_request *request)
+int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+ u32 mscan, u32 bestn)
{
struct brcmf_pno_param_le pfn_param;
- struct brcmf_pno_macaddr_le pfn_mac;
+ u16 flags;
+ u32 pfnmem;
s32 err;
- u8 *mac_mask;
- int i;
memset(&pfn_param, 0, sizeof(pfn_param));
pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION);
/* set extra pno params */
- pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
+ flags = BIT(BRCMF_PNO_IMMEDIATE_SCAN_BIT) |
+ BIT(BRCMF_PNO_REPORT_SEPARATELY_BIT) |
+ BIT(BRCMF_PNO_ENABLE_ADAPTSCAN_BIT);
pfn_param.repeat = BRCMF_PNO_REPEAT;
pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
/* set up pno scan fr */
- pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME);
+ pfn_param.scan_freq = cpu_to_le32(scan_freq);
+
+ if (mscan) {
+ pfnmem = bestn;
+ /* set bestn in firmware */
+ err = brcmf_fil_iovar_int_set(ifp, "pfnmem", pfnmem);
+ if (err < 0) {
+ brcmf_err("failed to set pfnmem\n");
+ goto exit;
+ }
+ /* get max mscan which the firmware supports */
+ err = brcmf_fil_iovar_int_get(ifp, "pfnmem", &pfnmem);
+ if (err < 0) {
+ brcmf_err("failed to get pfnmem\n");
+ goto exit;
+ }
+ mscan = min_t(u32, mscan, pfnmem);
+ pfn_param.mscan = mscan;
+ pfn_param.bestn = bestn;
+ flags |= BIT(BRCMF_PNO_ENABLE_BD_SCAN_BIT);
+ brcmf_dbg(INFO, "mscan=%d, bestn=%d\n", mscan, bestn);
+ }
+
+ pfn_param.flags = cpu_to_le16(flags);
err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
sizeof(pfn_param));
- if (err) {
+ if (err)
brcmf_err("pfn_set failed, err=%d\n", err);
- return err;
- }
- /* Find out if mac randomization should be turned on */
- if (!(request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR))
- return 0;
+exit:
+ return err;
+}
+
+int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask)
+{
+ struct brcmf_pno_macaddr_le pfn_mac;
+ int err, i;
pfn_mac.version = BRCMF_PFN_MACADDR_CFG_VER;
pfn_mac.flags = BRCMF_PFN_MAC_OUI_ONLY | BRCMF_PFN_SET_MAC_UNASSOC;
- memcpy(pfn_mac.mac, request->mac_addr, ETH_ALEN);
- mac_mask = request->mac_addr_mask;
+ memcpy(pfn_mac.mac, mac_addr, ETH_ALEN);
for (i = 0; i < ETH_ALEN; i++) {
pfn_mac.mac[i] &= mac_mask[i];
pfn_mac.mac[i] |= get_random_int() & ~(mac_mask[i]);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
@@ -30,10 +30,21 @@ int brcmf_pno_clean(struct brcmf_if *ifp
* brcmf_pno_config - configure pno parameters.
*
* @ifp: interface object used.
- * @request: scheduled scan parameters.
+ * @scan_freq: scan frequency period in seconds.
+ * @mscan: maximum number of scans stored in firmware.
+ * @bestn: maximum number of APs per scan stored in firmware.
*/
-int brcmf_pno_config(struct brcmf_if *ifp,
- struct cfg80211_sched_scan_request *request);
+int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+ u32 mscan, u32 bestn);
+
+/**
+ * brcmf_pno_set_random - setup randomisation mac address for pno.
+ *
+ * @ifp: interface object used.
+ * @mac_addr: MAC address used with randomisation.
+ * @mac_mask: MAC address mask used for randomisation.
+ */
+int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask);
/**
* brcmf_pno_add_ssid - add ssid for pno in firmware.

View File

@ -0,0 +1,292 @@
From 3e48611d31dd333be01576902f2dc11adefc9a06 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:27 +0000
Subject: [PATCH] brcmfmac: move scheduled scan activation to pno source file
Rework .sched_scan_start() callback moving actual configuration of
the device in pno source file.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 65 +-----------
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 110 +++++++++++++++++----
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 29 +-----
3 files changed, 94 insertions(+), 110 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -42,7 +42,6 @@
#include "common.h"
#define BRCMF_SCAN_IE_LEN_MAX 2048
-#define BRCMF_SCHED_SCAN_PERIOD 30
#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
#define WPA_OUI_TYPE 1
@@ -3342,24 +3341,6 @@ free_req:
return err;
}
-static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
- struct cfg80211_sched_scan_request *req)
-{
- int i;
-
- if (!ssid || !req->ssids || !req->n_ssids)
- return false;
-
- for (i = 0; i < req->n_ssids; i++) {
- if (ssid->ssid_len == req->ssids[i].ssid_len) {
- if (!strncmp(ssid->ssid, req->ssids[i].ssid,
- ssid->ssid_len))
- return true;
- }
- }
- return false;
-}
-
static int
brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
struct net_device *ndev,
@@ -3367,9 +3348,6 @@ brcmf_cfg80211_sched_scan_start(struct w
{
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
- struct cfg80211_ssid *ssid;
- int i;
- int ret = 0;
brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
req->n_match_sets, req->n_ssids);
@@ -3389,48 +3367,7 @@ brcmf_cfg80211_sched_scan_start(struct w
return -EINVAL;
}
- /* clean up everything */
- ret = brcmf_pno_clean(ifp);
- if (ret < 0) {
- brcmf_err("failed error=%d\n", ret);
- return ret;
- }
-
- /* configure pno */
- ret = brcmf_pno_config(ifp, BRCMF_SCHED_SCAN_PERIOD, 0, 0);
- if (ret < 0)
- return ret;
-
- /* configure random mac */
- if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
- ret = brcmf_pno_set_random(ifp, req->mac_addr,
- req->mac_addr_mask);
- if (ret < 0)
- return ret;
- }
-
- /* configure each match set */
- for (i = 0; i < req->n_match_sets; i++) {
-
- ssid = &req->match_sets[i].ssid;
-
- if (!ssid->ssid_len) {
- brcmf_err("skip broadcast ssid\n");
- continue;
- }
-
- ret = brcmf_pno_add_ssid(ifp, ssid,
- brcmf_is_ssid_active(ssid, req));
- if (ret < 0)
- brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
- ret == 0 ? "set" : "failed", ssid->ssid);
- }
- /* Enable the PNO */
- ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
- if (ret < 0)
- brcmf_err("PNO enable failed!! ret=%d\n", ret);
-
- return ret;
+ return brcmf_pno_start_sched_scan(ifp, req);
}
static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -32,25 +32,10 @@
#define BRCMF_PNO_SCAN_INCOMPLETE 0
#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
#define BRCMF_PNO_HIDDEN_BIT 2
+#define BRCMF_PNO_SCHED_SCAN_PERIOD 30
-int brcmf_pno_clean(struct brcmf_if *ifp)
-{
- int ret;
-
- /* Disable pfn */
- ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
- if (ret == 0) {
- /* clear pfn */
- ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
- }
- if (ret < 0)
- brcmf_err("failed code %d\n", ret);
-
- return ret;
-}
-
-int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
- u32 mscan, u32 bestn)
+static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
+ u32 mscan, u32 bestn)
{
struct brcmf_pno_param_le pfn_param;
u16 flags;
@@ -102,7 +87,8 @@ exit:
return err;
}
-int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask)
+static int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr,
+ u8 *mac_mask)
{
struct brcmf_pno_macaddr_le pfn_mac;
int err, i;
@@ -128,8 +114,8 @@ int brcmf_pno_set_random(struct brcmf_if
return err;
}
-int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
- bool active)
+static int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+ bool active)
{
struct brcmf_pno_net_param_le pfn;
@@ -144,3 +130,85 @@ int brcmf_pno_add_ssid(struct brcmf_if *
return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
}
+static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
+ struct cfg80211_sched_scan_request *req)
+{
+ int i;
+
+ if (!ssid || !req->ssids || !req->n_ssids)
+ return false;
+
+ for (i = 0; i < req->n_ssids; i++) {
+ if (ssid->ssid_len == req->ssids[i].ssid_len) {
+ if (!strncmp(ssid->ssid, req->ssids[i].ssid,
+ ssid->ssid_len))
+ return true;
+ }
+ }
+ return false;
+}
+
+int brcmf_pno_clean(struct brcmf_if *ifp)
+{
+ int ret;
+
+ /* Disable pfn */
+ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 0);
+ if (ret == 0) {
+ /* clear pfn */
+ ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
+ }
+ if (ret < 0)
+ brcmf_err("failed code %d\n", ret);
+
+ return ret;
+}
+
+int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
+ struct cfg80211_sched_scan_request *req)
+{
+ struct cfg80211_ssid *ssid;
+ int i, ret;
+
+ /* clean up everything */
+ ret = brcmf_pno_clean(ifp);
+ if (ret < 0) {
+ brcmf_err("failed error=%d\n", ret);
+ return ret;
+ }
+
+ /* configure pno */
+ ret = brcmf_pno_config(ifp, BRCMF_PNO_SCHED_SCAN_PERIOD, 0, 0);
+ if (ret < 0)
+ return ret;
+
+ /* configure random mac */
+ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+ ret = brcmf_pno_set_random(ifp, req->mac_addr,
+ req->mac_addr_mask);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* configure each match set */
+ for (i = 0; i < req->n_match_sets; i++) {
+ ssid = &req->match_sets[i].ssid;
+ if (!ssid->ssid_len) {
+ brcmf_err("skip broadcast ssid\n");
+ continue;
+ }
+
+ ret = brcmf_pno_add_ssid(ifp, ssid,
+ brcmf_is_ssid_active(ssid, req));
+ if (ret < 0)
+ brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
+ ret == 0 ? "set" : "failed", ssid->ssid);
+ }
+ /* Enable the PNO */
+ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
+ if (ret < 0)
+ brcmf_err("PNO enable failed!! ret=%d\n", ret);
+
+ return ret;
+}
+
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
@@ -27,33 +27,12 @@
int brcmf_pno_clean(struct brcmf_if *ifp);
/**
- * brcmf_pno_config - configure pno parameters.
+ * brcmf_pno_start_sched_scan - initiate scheduled scan on device.
*
* @ifp: interface object used.
- * @scan_freq: scan frequency period in seconds.
- * @mscan: maximum number of scans stored in firmware.
- * @bestn: maximum number of APs per scan stored in firmware.
+ * @req: configuration parameters for scheduled scan.
*/
-int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
- u32 mscan, u32 bestn);
-
-/**
- * brcmf_pno_set_random - setup randomisation mac address for pno.
- *
- * @ifp: interface object used.
- * @mac_addr: MAC address used with randomisation.
- * @mac_mask: MAC address mask used for randomisation.
- */
-int brcmf_pno_set_random(struct brcmf_if *ifp, u8 *mac_addr, u8 *mac_mask);
-
-/**
- * brcmf_pno_add_ssid - add ssid for pno in firmware.
- *
- * @ifp: interface object used.
- * @ssid: ssid information.
- * @active: indicate this ssid needs to be actively probed.
- */
-int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
- bool active);
+int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
+ struct cfg80211_sched_scan_request *req);
#endif /* _BRCMF_PNO_H */

View File

@ -0,0 +1,111 @@
From 331e789443618ca9cc3ed48ada4e670225cca036 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:28 +0000
Subject: [PATCH] brcmfmac: use provided channels for scheduled scan
User-space can provide list of channels in the schedule scan request.
This was ignored so all channels supported and allowed by the device
were used. This patch configures the device to use the channels as
listed in the request.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/fwil_types.h | 16 +++++++++++++
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 26 +++++++++++++++++++++-
2 files changed, 41 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -131,6 +131,7 @@
#define BRCMF_TXBF_MU_BFR_CAP BIT(1)
#define BRCMF_MAXPMKID 16 /* max # PMKID cache entries */
+#define BRCMF_NUMCHANNELS 64
#define BRCMF_PFN_MACADDR_CFG_VER 1
#define BRCMF_PFN_MAC_OUI_ONLY BIT(0)
@@ -719,6 +720,21 @@ struct brcmf_pno_param_le {
};
/**
+ * struct brcmf_pno_config_le - PNO channel configuration.
+ *
+ * @reporttype: determines what is reported.
+ * @channel_num: number of channels specified in @channel_list.
+ * @channel_list: channels to use in PNO scan.
+ * @flags: reserved.
+ */
+struct brcmf_pno_config_le {
+ __le32 reporttype;
+ __le32 channel_num;
+ __le16 channel_list[BRCMF_NUMCHANNELS];
+ __le32 flags;
+};
+
+/**
* struct brcmf_pno_net_param_le - scan parameters per preferred network.
*
* @ssid: ssid name and its length.
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -18,9 +18,10 @@
#include "core.h"
#include "debug.h"
-#include "pno.h"
#include "fwil.h"
#include "fwil_types.h"
+#include "cfg80211.h"
+#include "pno.h"
#define BRCMF_PNO_VERSION 2
#define BRCMF_PNO_REPEAT 4
@@ -34,6 +35,15 @@
#define BRCMF_PNO_HIDDEN_BIT 2
#define BRCMF_PNO_SCHED_SCAN_PERIOD 30
+static int brcmf_pno_channel_config(struct brcmf_if *ifp,
+ struct brcmf_pno_config_le *cfg)
+{
+ cfg->reporttype = 0;
+ cfg->flags = 0;
+
+ return brcmf_fil_iovar_data_set(ifp, "pfn_cfg", cfg, sizeof(*cfg));
+}
+
static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
u32 mscan, u32 bestn)
{
@@ -167,7 +177,10 @@ int brcmf_pno_clean(struct brcmf_if *ifp
int brcmf_pno_start_sched_scan(struct brcmf_if *ifp,
struct cfg80211_sched_scan_request *req)
{
+ struct brcmu_d11inf *d11inf;
+ struct brcmf_pno_config_le pno_cfg;
struct cfg80211_ssid *ssid;
+ u16 chan;
int i, ret;
/* clean up everything */
@@ -190,6 +203,17 @@ int brcmf_pno_start_sched_scan(struct br
return ret;
}
+ /* configure channels to use */
+ d11inf = &ifp->drvr->config->d11inf;
+ for (i = 0; i < req->n_channels; i++) {
+ chan = req->channels[i]->hw_value;
+ pno_cfg.channel_list[i] = cpu_to_le16(chan);
+ }
+ if (req->n_channels) {
+ pno_cfg.channel_num = cpu_to_le32(req->n_channels);
+ brcmf_pno_channel_config(ifp, &pno_cfg);
+ }
+
/* configure each match set */
for (i = 0; i < req->n_match_sets; i++) {
ssid = &req->match_sets[i].ssid;

View File

@ -0,0 +1,34 @@
From dfe5b0d52d5880bd9d4b427e1a53c9e9e4c3c820 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:29 +0000
Subject: [PATCH] brcmfmac: remove restriction from .sched_scan_start()
callback
In the .sched_scan_start() callback a condition was checked whether a
normal scan was ongoing. However, there is no need for this check as
it is ok to start the scheduled scan irrespective whether or not a
normal scan is ongoing.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3351,10 +3351,7 @@ brcmf_cfg80211_sched_scan_start(struct w
brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
req->n_match_sets, req->n_ssids);
- if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
- brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
- return -EAGAIN;
- }
+
if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
brcmf_err("Scanning suppressed: status (%lu)\n",
cfg->scan_status);

View File

@ -0,0 +1,67 @@
From c6989fd55ceb633d2f18c12ffae01b9123125c89 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:30 +0000
Subject: [PATCH] brcmfmac: use requested scan interval in scheduled scan
User-space can specify the interval for the scheduled scan. This
interval is found in scheduled scan plan. The driver supports only
one plan, which is legacy behaviour.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 1 +
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 6 +++++-
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 6 ++++--
3 files changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6312,6 +6312,7 @@ static void brcmf_wiphy_pno_params(struc
wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
+ wiphy->max_sched_scan_plan_interval = BRCMF_PNO_SCHED_SCAN_MAX_PERIOD;
wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -63,6 +63,10 @@ static int brcmf_pno_config(struct brcmf
pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX;
/* set up pno scan fr */
+ if (scan_freq < BRCMF_PNO_SCHED_SCAN_MIN_PERIOD) {
+ brcmf_dbg(SCAN, "scan period too small, using minimum\n");
+ scan_freq = BRCMF_PNO_SCHED_SCAN_MIN_PERIOD;
+ }
pfn_param.scan_freq = cpu_to_le32(scan_freq);
if (mscan) {
@@ -191,7 +195,7 @@ int brcmf_pno_start_sched_scan(struct br
}
/* configure pno */
- ret = brcmf_pno_config(ifp, BRCMF_PNO_SCHED_SCAN_PERIOD, 0, 0);
+ ret = brcmf_pno_config(ifp, req->scan_plans[0].interval, 0, 0);
if (ret < 0)
return ret;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
@@ -16,8 +16,10 @@
#ifndef _BRCMF_PNO_H
#define _BRCMF_PNO_H
-#define BRCMF_PNO_SCAN_COMPLETE 1
-#define BRCMF_PNO_MAX_PFN_COUNT 16
+#define BRCMF_PNO_SCAN_COMPLETE 1
+#define BRCMF_PNO_MAX_PFN_COUNT 16
+#define BRCMF_PNO_SCHED_SCAN_MIN_PERIOD 10
+#define BRCMF_PNO_SCHED_SCAN_MAX_PERIOD 508
/**
* brcmf_pno_clean - disable and clear pno in firmware.

View File

@ -0,0 +1,76 @@
From 53e3a80d80c80bf50ab64cf6c44fb0fa41aa22d8 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:31 +0000
Subject: [PATCH] brcmfmac: fix scheduled scan result handling for newer chips
The scan results for scheduled scan as retrieved from the device
have changed. A field has been added which is not needed. However,
the appended info is. Luckily they are versioned so check that to
find out the location of the appended data.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 24 +++++++++++++++++++++-
.../broadcom/brcm80211/brcmfmac/fwil_types.h | 7 +++++++
2 files changed, 30 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3257,6 +3257,28 @@ static int brcmf_start_internal_escan(st
return 0;
}
+static struct brcmf_pno_net_info_le *
+brcmf_get_netinfo_array(struct brcmf_pno_scanresults_le *pfn_v1)
+{
+ struct brcmf_pno_scanresults_v2_le *pfn_v2;
+ struct brcmf_pno_net_info_le *netinfo;
+
+ switch (pfn_v1->version) {
+ default:
+ WARN_ON(1);
+ /* fall-thru */
+ case cpu_to_le32(1):
+ netinfo = (struct brcmf_pno_net_info_le *)(pfn_v1 + 1);
+ break;
+ case cpu_to_le32(2):
+ pfn_v2 = (struct brcmf_pno_scanresults_v2_le *)pfn_v1;
+ netinfo = (struct brcmf_pno_net_info_le *)(pfn_v2 + 1);
+ break;
+ }
+
+ return netinfo;
+}
+
/* PFN result doesn't have all the info which are required by the supplicant
* (For e.g IEs) Do a target Escan so that sched scan results are reported
* via wl_inform_single_bss in the required format. Escan does require the
@@ -3309,7 +3331,7 @@ brcmf_notify_sched_scan_results(struct b
}
data += sizeof(struct brcmf_pno_scanresults_le);
- netinfo_start = (struct brcmf_pno_net_info_le *)data;
+ netinfo_start = brcmf_get_netinfo_array(pfn_result);
for (i = 0; i < result_count; i++) {
netinfo = &netinfo_start[i];
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -785,6 +785,13 @@ struct brcmf_pno_scanresults_le {
__le32 count;
};
+struct brcmf_pno_scanresults_v2_le {
+ __le32 version;
+ __le32 status;
+ __le32 count;
+ __le32 scan_ch_bucket;
+};
+
/**
* struct brcmf_pno_macaddr_le - to configure PNO macaddr randomization.
*

View File

@ -28,7 +28,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -5915,7 +5915,6 @@ static int brcmf_construct_chaninfo(stru @@ -5823,7 +5823,6 @@ static int brcmf_construct_chaninfo(stru
u32 i, j; u32 i, j;
u32 total; u32 total;
u32 chaninfo; u32 chaninfo;
@ -36,7 +36,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL); pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
@@ -5963,33 +5962,36 @@ static int brcmf_construct_chaninfo(stru @@ -5871,33 +5870,36 @@ static int brcmf_construct_chaninfo(stru
ch.bw == BRCMU_CHAN_BW_80) ch.bw == BRCMU_CHAN_BW_80)
continue; continue;
@ -85,7 +85,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ch.bw = BRCMU_CHAN_BW_20; ch.bw = BRCMU_CHAN_BW_20;
cfg->d11inf.encchspec(&ch); cfg->d11inf.encchspec(&ch);
chaninfo = ch.chspec; chaninfo = ch.chspec;
@@ -5997,11 +5999,11 @@ static int brcmf_construct_chaninfo(stru @@ -5905,11 +5907,11 @@ static int brcmf_construct_chaninfo(stru
&chaninfo); &chaninfo);
if (!err) { if (!err) {
if (chaninfo & WL_CHAN_RADAR) if (chaninfo & WL_CHAN_RADAR)

View File

@ -17,7 +17,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -147,7 +147,6 @@ static struct ieee80211_rate __wl_rates[ @@ -138,7 +138,6 @@ static struct ieee80211_rate __wl_rates[
.band = NL80211_BAND_2GHZ, \ .band = NL80211_BAND_2GHZ, \
.center_freq = (_freq), \ .center_freq = (_freq), \
.hw_value = (_channel), \ .hw_value = (_channel), \
@ -25,7 +25,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
.max_antenna_gain = 0, \ .max_antenna_gain = 0, \
.max_power = 30, \ .max_power = 30, \
} }
@@ -156,7 +155,6 @@ static struct ieee80211_rate __wl_rates[ @@ -147,7 +146,6 @@ static struct ieee80211_rate __wl_rates[
.band = NL80211_BAND_5GHZ, \ .band = NL80211_BAND_5GHZ, \
.center_freq = 5000 + (5 * (_channel)), \ .center_freq = 5000 + (5 * (_channel)), \
.hw_value = (_channel), \ .hw_value = (_channel), \

View File

@ -25,7 +25,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6566,8 +6566,7 @@ static int brcmf_setup_wiphy(struct wiph @@ -6475,8 +6475,7 @@ static int brcmf_setup_wiphy(struct wiph
wiphy->bands[NL80211_BAND_5GHZ] = band; wiphy->bands[NL80211_BAND_5GHZ] = band;
} }
} }
@ -35,7 +35,7 @@ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
} }
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
@@ -6932,6 +6931,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802 @@ -6841,6 +6840,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802
goto priv_out; goto priv_out;
} }

View File

@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -5976,6 +5976,9 @@ static int brcmf_construct_chaninfo(stru @@ -5884,6 +5884,9 @@ static int brcmf_construct_chaninfo(stru
continue; continue;
} }
@ -19,7 +19,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
/* assuming the chanspecs order is HT20, /* assuming the chanspecs order is HT20,
* HT40 upper, HT40 lower, and VHT80. * HT40 upper, HT40 lower, and VHT80.
*/ */
@@ -6566,6 +6569,9 @@ static int brcmf_setup_wiphy(struct wiph @@ -6475,6 +6478,9 @@ static int brcmf_setup_wiphy(struct wiph
wiphy->bands[NL80211_BAND_5GHZ] = band; wiphy->bands[NL80211_BAND_5GHZ] = band;
} }
} }

View File

@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -663,9 +663,37 @@ static struct wireless_dev *brcmf_cfg802 @@ -654,9 +654,37 @@ static struct wireless_dev *brcmf_cfg802
u32 *flags, u32 *flags,
struct vif_params *params) struct vif_params *params)
{ {

View File

@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2782,6 +2782,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip @@ -2773,6 +2773,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
* preference in cfg struct to apply this to * preference in cfg struct to apply this to
* FW later while initializing the dongle * FW later while initializing the dongle
*/ */