mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: add NAND driver for the Mikrotik RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39097owl
Gabor Juhos
parent
d7a0184446
commit
8461ffccc1
|
|
@ -0,0 +1,355 @@
|
|||
/*
|
||||
* NAND flash driver for the MikroTik RouterBOARD 91x series
|
||||
*
|
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
|
||||
#define DRV_NAME "rb91x-nand"
|
||||
#define DRV_DESC "NAND flash driver for the RouterBOARD 91x series"
|
||||
|
||||
#define RB91X_NAND_NRE_ENABLE BIT(3)
|
||||
#define RB91X_NAND_RDY BIT(4)
|
||||
#define RB91X_LATCH_ENABLE BIT(11)
|
||||
#define RB91X_NAND_NRWE BIT(12)
|
||||
#define RB91X_NAND_NCE BIT(13)
|
||||
#define RB91X_NAND_CLE BIT(14)
|
||||
#define RB91X_NAND_ALE BIT(15)
|
||||
|
||||
#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\
|
||||
BIT(13) | BIT(14) | BIT(15))
|
||||
|
||||
#define RB91X_NAND_INPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_RDY)
|
||||
#define RB91X_NAND_OUTPUT_BITS \
|
||||
(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
|
||||
|
||||
#define RB91X_NAND_LOW_DATA_MASK 0x1f
|
||||
#define RB91X_NAND_HIGH_DATA_MASK 0xe0
|
||||
#define RB91X_NAND_HIGH_DATA_SHIFT 8
|
||||
|
||||
struct rb91x_nand_info {
|
||||
struct nand_chip chip;
|
||||
struct mtd_info mtd;
|
||||
};
|
||||
|
||||
static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
|
||||
{
|
||||
return container_of(mtd, struct rb91x_nand_info, mtd);
|
||||
}
|
||||
|
||||
/*
|
||||
* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
|
||||
* will not be able to find the kernel that we load.
|
||||
*/
|
||||
static struct nand_ecclayout rb91x_nand_ecclayout = {
|
||||
.eccbytes = 6,
|
||||
.eccpos = { 8, 9, 10, 13, 14, 15 },
|
||||
.oobavail = 9,
|
||||
.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
|
||||
};
|
||||
|
||||
static struct mtd_partition rb91x_nand_partitions[] = {
|
||||
{
|
||||
.name = "booter",
|
||||
.offset = 0,
|
||||
.size = (256 * 1024),
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "kernel",
|
||||
.offset = (256 * 1024),
|
||||
.size = (4 * 1024 * 1024) - (256 * 1024),
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static void rb91x_change_gpo(u32 clear, u32 set)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
static unsigned on = 0xE002800;
|
||||
static unsigned off = 0x0000C008;
|
||||
static unsigned oe = 0;
|
||||
static DEFINE_SPINLOCK(lock);
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&lock, flags);
|
||||
|
||||
on = (on | set) & ~clear;
|
||||
off = (off | clear) & ~set;
|
||||
|
||||
if (!oe)
|
||||
oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
if (on & RB91X_LATCH_ENABLE) {
|
||||
u32 t;
|
||||
|
||||
t = oe & __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
t &= ~(on | off);
|
||||
__raw_writel(t, base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(off, base + AR71XX_GPIO_REG_CLEAR);
|
||||
__raw_writel(on, base + AR71XX_GPIO_REG_SET);
|
||||
} else if (clear & RB91X_LATCH_ENABLE) {
|
||||
oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(RB91X_LATCH_ENABLE,
|
||||
base + AR71XX_GPIO_REG_CLEAR);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&lock, flags);
|
||||
}
|
||||
|
||||
static inline void rb91x_latch_enable(void)
|
||||
{
|
||||
rb91x_change_gpo(RB91X_LATCH_ENABLE, 0);
|
||||
}
|
||||
|
||||
static inline void rb91x_latch_disable(void)
|
||||
{
|
||||
rb91x_change_gpo(0, RB91X_LATCH_ENABLE);
|
||||
}
|
||||
|
||||
static void rb91x_nand_write(const u8 *buf, unsigned len)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
u32 oe_reg;
|
||||
u32 out_reg;
|
||||
u32 out;
|
||||
unsigned i;
|
||||
|
||||
rb91x_latch_enable();
|
||||
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* set data lines to output mode */
|
||||
__raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE),
|
||||
base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE);
|
||||
for (i = 0; i != len; i++) {
|
||||
u32 data;
|
||||
|
||||
data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) <<
|
||||
RB91X_NAND_HIGH_DATA_SHIFT;
|
||||
data |= buf[i] & RB91X_NAND_LOW_DATA_MASK;
|
||||
data |= out;
|
||||
__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* deactivate WE line */
|
||||
data |= RB91X_NAND_NRWE;
|
||||
__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
}
|
||||
|
||||
/* restore registers */
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
rb91x_latch_disable();
|
||||
}
|
||||
|
||||
static void rb91x_nand_read(u8 *read_buf, unsigned len)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
u32 oe_reg;
|
||||
u32 out_reg;
|
||||
unsigned i;
|
||||
|
||||
/* save registers */
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
/* select nRE mode */
|
||||
rb91x_change_gpo(0, RB91X_NAND_NRE_ENABLE);
|
||||
|
||||
/* enable latch */
|
||||
rb91x_latch_enable();
|
||||
|
||||
out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* set data lines to input mode */
|
||||
__raw_writel(oe_reg | RB91X_NAND_DATA_BITS,
|
||||
base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
u32 in;
|
||||
u8 data;
|
||||
|
||||
/* activate RE line */
|
||||
__raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_CLEAR);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
|
||||
|
||||
/* read input lines */
|
||||
in = __raw_readl(base + AR71XX_GPIO_REG_IN);
|
||||
|
||||
/* deactivate RE line */
|
||||
__raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_SET);
|
||||
|
||||
data = (in & RB91X_NAND_LOW_DATA_MASK);
|
||||
data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) &
|
||||
RB91X_NAND_HIGH_DATA_MASK;
|
||||
|
||||
read_buf[i] = data;
|
||||
}
|
||||
|
||||
/* restore registers */
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
|
||||
/* flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* disable latch */
|
||||
rb91x_latch_disable();
|
||||
|
||||
/* deselect nRE mode */
|
||||
rb91x_change_gpo(RB91X_NAND_NRE_ENABLE, 0);
|
||||
}
|
||||
|
||||
static int rb91x_nand_dev_ready(struct mtd_info *mtd)
|
||||
{
|
||||
void __iomem *base = ath79_gpio_base;
|
||||
|
||||
return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB91X_NAND_RDY);
|
||||
}
|
||||
|
||||
static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
|
||||
unsigned int ctrl)
|
||||
{
|
||||
if (ctrl & NAND_CTRL_CHANGE) {
|
||||
u32 on = 0;
|
||||
u32 off;
|
||||
|
||||
if (!(ctrl & NAND_NCE))
|
||||
on |= RB91X_NAND_NCE;
|
||||
|
||||
if (ctrl & NAND_CLE)
|
||||
on |= RB91X_NAND_CLE;
|
||||
|
||||
if (ctrl & NAND_ALE)
|
||||
on |= RB91X_NAND_ALE;
|
||||
|
||||
off = on ^ (RB91X_NAND_ALE | RB91X_NAND_NCE | RB91X_NAND_CLE);
|
||||
rb91x_change_gpo(off, on);
|
||||
}
|
||||
|
||||
if (cmd != NAND_CMD_NONE) {
|
||||
u8 t = cmd;
|
||||
|
||||
rb91x_nand_write(&t, 1);
|
||||
}
|
||||
}
|
||||
|
||||
static u8 rb91x_nand_read_byte(struct mtd_info *mtd)
|
||||
{
|
||||
u8 data = 0xff;
|
||||
|
||||
rb91x_nand_read(&data, 1);
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
|
||||
{
|
||||
rb91x_nand_read(buf, len);
|
||||
}
|
||||
|
||||
static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
|
||||
{
|
||||
rb91x_nand_write(buf, len);
|
||||
}
|
||||
|
||||
static int rb91x_nand_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct rb91x_nand_info *info;
|
||||
int ret;
|
||||
|
||||
pr_info(DRV_DESC "\n");
|
||||
|
||||
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
||||
if (!info)
|
||||
return -ENOMEM;
|
||||
|
||||
info->chip.priv = &info;
|
||||
info->mtd.priv = &info->chip;
|
||||
info->mtd.owner = THIS_MODULE;
|
||||
|
||||
info->chip.cmd_ctrl = rb91x_nand_cmd_ctrl;
|
||||
info->chip.dev_ready = rb91x_nand_dev_ready;
|
||||
info->chip.read_byte = rb91x_nand_read_byte;
|
||||
info->chip.write_buf = rb91x_nand_write_buf;
|
||||
info->chip.read_buf = rb91x_nand_read_buf;
|
||||
|
||||
info->chip.chip_delay = 25;
|
||||
info->chip.ecc.mode = NAND_ECC_SOFT;
|
||||
|
||||
platform_set_drvdata(pdev, info);
|
||||
|
||||
ret = nand_scan_ident(&info->mtd, 1, NULL);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (info->mtd.writesize == 512)
|
||||
info->chip.ecc.layout = &rb91x_nand_ecclayout;
|
||||
|
||||
ret = nand_scan_tail(&info->mtd);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = mtd_device_register(&info->mtd, rb91x_nand_partitions,
|
||||
ARRAY_SIZE(rb91x_nand_partitions));
|
||||
if (ret)
|
||||
goto err_release_nand;
|
||||
|
||||
return 0;
|
||||
|
||||
err_release_nand:
|
||||
nand_release(&info->mtd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rb91x_nand_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct rb91x_nand_info *info = platform_get_drvdata(pdev);
|
||||
|
||||
nand_release(&info->mtd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver rb91x_nand_driver = {
|
||||
.probe = rb91x_nand_probe,
|
||||
.remove = rb91x_nand_remove,
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(rb91x_nand_driver);
|
||||
|
||||
MODULE_DESCRIPTION(DRV_DESC);
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -552,6 +552,10 @@ config MTD_NAND_RB750
|
||||
tristate "NAND flash driver for the RouterBoard 750"
|
||||
depends on MTD_NAND && ATH79_MACH_RB750
|
||||
|
||||
+config MTD_NAND_RB91X
|
||||
+ tristate "NAND flash driver for the RouterBOARD 91x series"
|
||||
+ depends on MTD_NAND && ATH79_MACH_RB91X
|
||||
+
|
||||
config MTD_NAND_AR934X
|
||||
tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
|
||||
depends on (SOC_AR934X || SOC_QCA955X)
|
||||
--- a/drivers/mtd/nand/Makefile
|
||||
+++ b/drivers/mtd/nand/Makefile
|
||||
@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan
|
||||
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
|
||||
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
||||
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
||||
Loading…
Reference in New Issue