mirror of https://github.com/hak5/openwrt-owl.git
ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>owl
Thibaut VARENE
John Crispin
parent
29d0ac35bd
commit
7fb11c8ed2
|
|
@ -155,7 +155,8 @@ vr500)
|
|||
dir-860l-b1)
|
||||
ucidef_set_led_netdev "wan" "wan" "$board:green:net" "eth0.2"
|
||||
;;
|
||||
ex2700)
|
||||
ex2700|\
|
||||
wn3000rpv3)
|
||||
ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
|
||||
set_wifi_led "$board:green:router"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -58,6 +58,7 @@ ramips_setup_interfaces()
|
|||
timecloud|\
|
||||
w150m|\
|
||||
widora-neo|\
|
||||
wn3000rpv3|\
|
||||
wnce2001|\
|
||||
zbt-cpe102|\
|
||||
zte-q7)
|
||||
|
|
|
|||
|
|
@ -53,7 +53,8 @@ get_status_led() {
|
|||
jhr-n825r|\
|
||||
mpr-a1|\
|
||||
mpr-a2|\
|
||||
mzk-ex750np)
|
||||
mzk-ex750np|\
|
||||
wn3000rpv3)
|
||||
status_led="$board:red:power"
|
||||
;;
|
||||
ac1200pro|\
|
||||
|
|
|
|||
|
|
@ -553,6 +553,9 @@ ramips_board_detect() {
|
|||
*"WMR-300")
|
||||
name="wmr-300"
|
||||
;;
|
||||
*"WN3000RPv3")
|
||||
name="wn3000rpv3"
|
||||
;;
|
||||
*"WNCE2001")
|
||||
name="wnce2001"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -157,6 +157,7 @@ platform_check_image() {
|
|||
wli-tx4-ag300n|\
|
||||
wlr-6000|\
|
||||
wmr-300|\
|
||||
wn3000rpv3|\
|
||||
wnce2001|\
|
||||
wndr3700v5|\
|
||||
wr512-3gn|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,143 @@
|
|||
/* This file is released into the public domain */
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
compatible = "ralink,mt7620a-soc";
|
||||
model = "Netgear WN3000RPv3";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_g {
|
||||
label = "wn3000rpv3:green:power";
|
||||
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
power_r {
|
||||
label = "wn3000rpv3:red:power";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_g {
|
||||
label = "wn3000rpv3:green:client";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
client_r {
|
||||
label = "wn3000rpv3:red:client";
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_g {
|
||||
label = "wn3000rpv3:green:router";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_r {
|
||||
label = "wn3000rpv3:red:router";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wn3000rpv3:green:wps";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
l_arrow {
|
||||
label = "wn3000rpv3:blue:leftarrow";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
r_arrow {
|
||||
label = "wn3000rpv3:blue:rightarrow";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "firmware";
|
||||
reg = <0x40000 0x7b0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
mtd-mac-address = <&art 0x6>;
|
||||
ralink,mtd-eeprom = <&art 0x1000>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
default {
|
||||
ralink,group = "i2c", "uartf", "spi refclk";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -75,6 +75,17 @@ define Device/ex2700
|
|||
endef
|
||||
TARGET_DEVICES += ex2700
|
||||
|
||||
define Device/wn3000rpv3
|
||||
DTS := WN3000RPV3
|
||||
BLOCKSIZE := 4k
|
||||
IMAGES += factory.bin
|
||||
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-kernel-ex2700
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
||||
netgear-header -B WN3000RPv3 -H 29764836+8+0+32+2x2+0
|
||||
DEVICE_TITLE := Netgear WN3000RPv3
|
||||
endef
|
||||
TARGET_DEVICES += wn3000rpv3
|
||||
|
||||
define Device/wt3020-4M
|
||||
DTS := WT3020-4M
|
||||
BLOCKSIZE := 4k
|
||||
|
|
|
|||
Loading…
Reference in New Issue