hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ipq806x: switch the NBG6817 wlan LEDs from amber to white 

The original device support patch configured the amber wlan LEDs (which
are meant as error indicator by the OEM) controlled by the SOC's GPIO
as wlan traffic indicators, as the correct white wlan LEDs are
connected to GPIOs controlled by the QCA9984/ ath10k wlan cards were
not accessible. The recent addition of GPIO/ LED support to ath10k now
makes it possible to use the correct white LEDs instead - and
"mac80211: ath10k: use tpt LED trigger by default" also enables them by
default. While both LEDs are independent of each other (two separate
LEDs sharing one light tunnel), triggering both on wlan traffic is not
the intended behaviour (bright yellow light).

Tested on the ZyXEL NBG6817.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
master
Stefan Lippers-Hollmann 2018-06-28 14:04:46 +02:00 committed by Mathias Kresin
parent 19c7e950af
commit 7c7ca66109
1 changed files with 0 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@ -43,8 +43,6 @@ tplink,vr2600v)
ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
;;
zyxel,nbg6817)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
;;
*)