ramips: rt305x: add support for the ZyXEL NBG-419N board

SVN-Revision: 28078

target/linux/ramips/base-files/etc/diag.sh

@@ -42,6 +42,9 @@ get_status_led() {
 	mofi3500-3gn)
 		status_led="mofi3500-3gn:green:status"
 		;;
+	nbg-419n)
+		status_led="nbg-419n:green:power"
+		;;
 	nw718)
 		status_led="nw718:amber:cpu"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -50,6 +50,7 @@ case "$FIRMWARE" in
 	hw550-3g | \
 	mofi3500-3gn | \
 	pwh2004 | \
+	nbg-419n | \
 	nw718 | \
 	rt-n15 | \
 	v22rw-2x2 | \

target/linux/ramips/base-files/lib/ramips.sh

@@ -34,6 +34,9 @@ ramips_board_name() {
 	*"MoFi Network MOFI3500-3GN")
 		name="mofi3500-3gn"
 		;;
+	*"NBG-419N")
+		name="nbg-419n"
+		;;
 	*"NW718")
 		name="nw718"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -14,7 +14,7 @@ platform_check_image() {
 	[ "$ARGC" -gt 1 ] && return 1
 
 	case "$board" in
-	dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn)
+	dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nbg-419n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."
 			return 1

target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

@@ -30,6 +30,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_FONERA20N,		/* La Fonera 2.0N */
 	RAMIPS_MACH_HW550_3G,		/* Aztech HW550-3G */
 	RAMIPS_MACH_MOFI3500_3GN,	/* MoFi Network MOFI3500-3GN */
+	RAMIPS_MACH_NBG_419N,		/* ZyXEL NBG-419N */
 	RAMIPS_MACH_PWH2004,		/* Prolink 2004H / Abocom 5205 */
 	RAMIPS_MACH_V22RW_2X2,		/* Ralink AP-RT3052-V22RW-2X2 */
 	RAMIPS_MACH_WCR150GN,		/* Sparklan WCR-150GN */

target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

@@ -66,6 +66,11 @@ config RT305X_MACH_WCR150GN
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_NBG_419N
+	bool "ZyXEL NBG-419N support"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 endmenu
 
 endif

target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_RT305X_MACH_F5D8235_V2)    += mach-f5d8235-v2.o
 obj-$(CONFIG_RT305X_MACH_FONERA20N)	+= mach-fonera20n.o
 obj-$(CONFIG_RT305X_MACH_HW550_3G)	+= mach-hw550-3g.o
 obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN)	+= mach-mofi3500-3gn.o
+obj-$(CONFIG_RT305X_MACH_NBG_419N)	+= mach-nbg-419n.o
 obj-$(CONFIG_RT305X_MACH_NW718)		+= mach-nw718.o
 obj-$(CONFIG_RT305X_MACH_PWH2004)	+= mach-pwh2004.o
 obj-$(CONFIG_RT305X_MACH_RT_G32_REVB)	+= mach-rt-g32-revb.o

target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c

@@ -0,0 +1,111 @@
+/*
+ *  ZyXEL NBG-419N board support
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define NBG_419N_GPIO_LED_POWER		9
+#define NBG_419N_GPIO_LED_WPS		14
+
+#define NBG_419N_GPIO_BUTTON_WPS	0	/* active low */
+#define NBG_419N_GPIO_BUTTON_RESET	10	/* active low */
+
+#define NBG_419N_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition nbg_419n_partitions[] = {
+	{
+		.name	= "u-boot",
+		.offset	= 0,
+		.size	= 0x030000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "config",
+		.offset	= 0x030000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "factory",
+		.offset	= 0x040000,
+		.size	= 0x010000,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= 0x050000,
+		.size	= 0x3b0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data nbg_419n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(nbg_419n_partitions),
+	.parts		= nbg_419n_partitions,
+#endif
+};
+
+static struct gpio_led nbg_419n_leds_gpio[] __initdata = {
+	{
+		.name		= "nbg-419n:green:power",
+		.gpio		= NBG_419N_GPIO_LED_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "nbg-419n:green:wps",
+		.gpio		= NBG_419N_GPIO_LED_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button nbg_419n_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= NBG_419N_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= NBG_419N_GPIO_BUTTON_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init nbg_419n_init(void)
+{
+	rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+	rt305x_register_flash(0, &nbg_419n_flash_data);
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+	rt305x_register_ethernet();
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio),
+				  nbg_419n_leds_gpio);
+	ramips_register_gpio_buttons(-1, NBG_419N_BUTTONS_POLL_INTERVAL,
+				     ARRAY_SIZE(nbg_419n_gpio_buttons),
+				     nbg_419n_gpio_buttons);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init);

target/linux/ramips/image/Makefile

@@ -154,6 +154,10 @@ define Image/Build/Profile/FONERA20N
 	$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
 endef
 
+define Image/Build/Profile/NBG419N
+	$(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
+endef
+
 define Image/Build/Profile/NW718
 	$(call Image/Build/Template/NW718,$(1),nw718,NW718)
 endef
@@ -237,6 +241,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/RTG32B1,$(1))
 	$(call Image/Build/Profile/FONERA20N,$(1))
 	$(call Image/Build/Profile/V22RW2X2,$(1))
+	$(call Image/Build/Profile/NBG419N,$(1))
 	$(call Image/Build/Profile/NW718,$(1))
 	$(call Image/Build/Profile/PWH2004,$(1))
 	$(call Image/Build/Profile/WHRG300N,$(1))

target/linux/ramips/rt305x/config-2.6.39

@@ -98,6 +98,7 @@ CONFIG_RT305X_MACH_FONERA20N=y
 CONFIG_RT305X_MACH_HW550_3G=y
 CONFIG_RT305X_MACH_MOFI3500_3GN=y
 CONFIG_RT305X_MACH_NW718=y
+CONFIG_RT305X_MACH_NBG_419N=y
 CONFIG_RT305X_MACH_PWH2004=y
 CONFIG_RT305X_MACH_RT_G32_REVB=y
 CONFIG_RT305X_MACH_V22RW_2X2=y