brcm2708: convert to dt-based board-detection

Use the values populated by the generic board detect function. The
first compatible from the device tree source file will be the board
name in userspace. The model property from the device tree source file
will be the model name.

Change the board name where used in the userspace and drop the target
specific board detect, to use the generic one.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

target/linux/brcm2708/base-files/etc/board.d/02_network

@@ -11,13 +11,15 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-rpi-2-b |\
-rpi-3-b |\
-rpi-b |\
-rpi-b-plus)
+raspberrypi,model-b |\
+raspberrypi,model-b-plus |\
+raspberrypi,model-b-rev2 |\
+raspberrypi,2-model-b |\
+raspberrypi,3-model-b)
 	ucidef_set_interface_lan "eth0"
 	;;
-rpi-zero-w)
+
+raspberrypi,model-zero-w)
 	ucidef_set_interface_lan "wlan0"
 	;;
 esac

target/linux/brcm2708/base-files/etc/diag.sh

@@ -7,14 +7,13 @@
 
 set_state() {
 	case "$(board_name)" in
-	rpi-2-b |\
-	rpi-b-plus)
+	raspberrypi,2-model-b |\
+	raspberrypi,model-b-plus)
 		status_led="led1"
 		;;
-	rpi-b |\
-	rpi-cm |\
-	rpi-zero |\
-	rpi-zero-w)
+	raspberrypi,model-b |\
+	raspberrypi,model-zero |\
+	raspberrypi,model-zero-w)
 		status_led="led0"
 		;;
 	esac

target/linux/brcm2708/base-files/lib/brcm2708.sh

@@ -1,43 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2015-2016 OpenWrt.org
-# Copyright (C) 2017 LEDE project
-
-ifname=""
-
-brcm2708_detect() {
-	local board_name model
-
-	model=$(cat /proc/device-tree/model)
-	case "$model" in
-	"Raspberry Pi 2 Model B Rev"*)
-		board_name="rpi-2-b"
-		;;
-	"Raspberry Pi 3 Model B Rev"*)
-		board_name="rpi-3-b"
-		;;
-	"Raspberry Pi Compute Module Rev"*)
-		board_name="rpi-cm"
-		;;
-	"Raspberry Pi Model B Plus Rev"* |\
-	"Raspberry Pi Model B+ Rev"*)
-		board_name="rpi-b-plus"
-		;;
-	"Raspberry Pi Model B Rev"*)
-		board_name="rpi-b"
-		;;
-	"Raspberry Pi Zero Rev"*)
-		board_name="rpi-zero"
-		;;
-	"Raspberry Pi Zero W Rev"*)
-		board_name="rpi-zero-w"
-		;;
-	*)
-		board_name="unknown"
-		;;
-	esac
-
-	[ -e "/tmp/sysinfo" ] || mkdir -p "/tmp/sysinfo"
-
-	echo "$board_name" > /tmp/sysinfo/board_name
-	echo "$model" > /tmp/sysinfo/model
-}

target/linux/brcm2708/base-files/lib/preinit/01_preinit_do_brcm2708.sh

@@ -1,10 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2015 OpenWrt.org
-
-do_brcm2708() {
-	. /lib/brcm2708.sh
-
-	brcm2708_detect
-}
-
-boot_hook_add preinit_main do_brcm2708

target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708

@@ -6,10 +6,11 @@ set_preinit_iface() {
 	. /lib/functions.sh
 
 	case "$(board_name)" in
-	rpi-2-b |\
-	rpi-3-b |\
-	rpi-b |\
-	rpi-b-plus)
+	raspberrypi,2-model-b |\
+	raspberrypi,3-model-b |\
+	raspberrypi,model-b |\
+	raspberrypi,model-b-plus |\
+	raspberrypi,model-b-rev2)
 		ifname=eth0
 		;;
 	esac

target/linux/brcm2708/image/Makefile

@@ -57,7 +57,7 @@ endef
 define Device/rpi
   DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero/ZeroW
   DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm bcm2708-rpi-0-w
-  SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero-w
+  SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,compute-module-1 raspberrypi,model-b-rev2 raspberrypi,model-zero raspberrypi,model-zero-w
 endef
 ifeq ($(SUBTARGET),bcm2708)
   TARGET_DEVICES += rpi
@@ -66,7 +66,7 @@ endif
 define Device/rpi-2
   DEVICE_TITLE := Raspberry Pi 2B/3B/3CM
   DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-cm3
-  SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-cm
+  SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,compute-module-3
 endef
 ifeq ($(SUBTARGET),bcm2709)
   TARGET_DEVICES += rpi-2
@@ -76,7 +76,7 @@ define Device/rpi-3
   KERNEL_IMG := kernel8.img
   DEVICE_TITLE := Raspberry Pi 3B (64 bit)
   DEVICE_DTS := broadcom/bcm2710-rpi-3-b
-  SUPPORTED_DEVICES := rpi-3-b
+  SUPPORTED_DEVICES := rpi-3-b raspberrypi,3-model-b
 endef
 ifeq ($(SUBTARGET),bcm2710)
   TARGET_DEVICES += rpi-3