mirror of https://github.com/hak5/openwrt-owl.git
imx6: add v4.1 support
Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47331owl
Felix Fietkau
parent
6a18146206
commit
6bc9a6d0a8
|
|
@ -0,0 +1,382 @@
|
|||
CONFIG_AHCI_IMX=y
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
||||
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
|
||||
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
|
||||
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
|
||||
CONFIG_ARCH_HAS_SG_CHAIN=y
|
||||
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
|
||||
CONFIG_ARCH_MULTI_V6_V7=y
|
||||
CONFIG_ARCH_MULTI_V7=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
|
||||
CONFIG_ARCH_SUPPORTS_UPROBES=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
|
||||
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
|
||||
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
|
||||
CONFIG_ARM=y
|
||||
# CONFIG_ARM_CPU_SUSPEND is not set
|
||||
CONFIG_ARM_ERRATA_754322=y
|
||||
CONFIG_ARM_ERRATA_764369=y
|
||||
CONFIG_ARM_ERRATA_775420=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_HAS_SG_CHAIN=y
|
||||
CONFIG_ARM_IMX6Q_CPUFREQ=y
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=6
|
||||
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
||||
# CONFIG_ARM_LPAE is not set
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_ARM_THUMBEE is not set
|
||||
CONFIG_ARM_VIRT_EXT=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_ATAGS=y
|
||||
# CONFIG_ATA_SFF is not set
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_CACHE_L2X0=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPU_32v6K=y
|
||||
CONFIG_CPU_32v7=y
|
||||
CONFIG_CPU_ABRT_EV7=y
|
||||
# CONFIG_CPU_BPREDICT_DISABLE is not set
|
||||
CONFIG_CPU_CACHE_V7=y
|
||||
CONFIG_CPU_CACHE_VIPT=y
|
||||
CONFIG_CPU_COPY_V6=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_FREQ_STAT_DETAILS=y
|
||||
CONFIG_CPU_HAS_ASID=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_PABRT_V7=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_TLB_V7=y
|
||||
CONFIG_CPU_V7=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
CONFIG_CRYPTO_XZ=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_IMX_UART_PORT=1
|
||||
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
|
||||
# CONFIG_DEBUG_UART_8250 is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_LZO=y
|
||||
CONFIG_DECOMPRESS_XZ=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_DW_DMAC_PCI is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
CONFIG_EXT2_FS_SECURITY=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
CONFIG_EXT3_FS_SECURITY=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_FEC=y
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_FSL_PQ_MDIO is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_DEVRES=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_MXC=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
|
||||
CONFIG_HAVE_ARCH_BITREVERSE=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_PFN_VALID=y
|
||||
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
CONFIG_HAVE_ARM_SCU=y
|
||||
CONFIG_HAVE_ARM_TWD=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_BPF_JIT=y
|
||||
CONFIG_HAVE_CC_STACKPROTECTOR=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_CLK_PREPARE=y
|
||||
CONFIG_HAVE_CONTEXT_TRACKING=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DMA_CONTIGUOUS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_HW_BREAKPOINT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IMX_ANATOP=y
|
||||
CONFIG_HAVE_IMX_GPC=y
|
||||
CONFIG_HAVE_IMX_MMDC=y
|
||||
CONFIG_HAVE_IMX_SRC=y
|
||||
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
||||
CONFIG_HAVE_KERNEL_GZIP=y
|
||||
CONFIG_HAVE_KERNEL_LZ4=y
|
||||
CONFIG_HAVE_KERNEL_LZMA=y
|
||||
CONFIG_HAVE_KERNEL_LZO=y
|
||||
CONFIG_HAVE_KERNEL_XZ=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_OPTPROBES=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PERF_REGS=y
|
||||
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
CONFIG_HAVE_SMP=y
|
||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
||||
CONFIG_HAVE_UID16=y
|
||||
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
|
||||
# CONFIG_HSU_DMA_PCI is not set
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_IMX_DMA=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
# CONFIG_IMX_WEIM is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IOMMU_HELPER=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_JBD=y
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
||||
CONFIG_MIGHT_HAVE_PCI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
# CONFIG_MMC_MXC is not set
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
||||
# CONFIG_MTD_PHYSMAP_OF is not set
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
# CONFIG_MTD_UBI_BLOCK is not set
|
||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MULTI_IRQ_HANDLER=y
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
# CONFIG_MX3_IPU is not set
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NO_BOOTMEM=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=4
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_ADDRESS_PCI=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_MTD=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_OF_RESERVED_MEM=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_OUTER_CACHE_SYNC=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0x80000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
# CONFIG_PCIE_IPROC is not set
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_IMX6=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PGTABLE_LEVELS=2
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_IMX=y
|
||||
CONFIG_PINCTRL_IMX6Q=y
|
||||
CONFIG_PINCTRL_IMX6SL=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
CONFIG_PL310_ERRATA_588369=y
|
||||
CONFIG_PL310_ERRATA_727915=y
|
||||
# CONFIG_PL310_ERRATA_753970 is not set
|
||||
CONFIG_PL310_ERRATA_769419=y
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_PPS=y
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RCU_STALL_COMMON=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_LZO=y
|
||||
CONFIG_RD_XZ=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_ANATOP=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_PFUZE100=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_DRV_IMXDI is not set
|
||||
# CONFIG_RTC_DRV_MXC is not set
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_SATA_AHCI_PLATFORM=y
|
||||
CONFIG_SCHED_HRTICK=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SMP_ON_UP=y
|
||||
CONFIG_SOC_BUS=y
|
||||
# CONFIG_SOC_IMX50 is not set
|
||||
# CONFIG_SOC_IMX51 is not set
|
||||
# CONFIG_SOC_IMX53 is not set
|
||||
CONFIG_SOC_IMX6=y
|
||||
CONFIG_SOC_IMX6Q=y
|
||||
CONFIG_SOC_IMX6SL=y
|
||||
# CONFIG_SOC_IMX6SX is not set
|
||||
# CONFIG_SOC_LS1021A is not set
|
||||
# CONFIG_SOC_VF610 is not set
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_SPI_IMX=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_STMP_DEVICE=y
|
||||
CONFIG_STOP_MACHINE=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWP_EMULATE=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
# CONFIG_THUMB2_KERNEL is not set
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_XZ=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
# CONFIG_USB_MXS_PHY is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_VFP=y
|
||||
CONFIG_VFPv3=y
|
||||
CONFIG_VMSPLIT_2G=y
|
||||
# CONFIG_VMSPLIT_3G is not set
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
|
|
@ -0,0 +1,950 @@
|
|||
/*
|
||||
* drivers/net/phy/gw16083.c
|
||||
*
|
||||
* Driver for GW16083 Ventana Ethernet Expansion Mezzanine
|
||||
*
|
||||
* Author: Tim Harvey
|
||||
*
|
||||
* Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* The GW16083 interfaces with a Ventana baseboard via the PCIe bus, an i2c
|
||||
* bus (i2c2), and a couple of GPIO's. On the PCIe bus is an i210 GigE with
|
||||
* its MAC connected to Port4 of a Marvell MV88E6176 7-port GigE switch via
|
||||
* MDIO and RGMII. Ports 0-3 are standard copper RJ45 but Ports 5 and 6
|
||||
* connect to Marvell MV88E1111 dual-mode Copper/Fiber PHY's over SGMII and
|
||||
* MDIO. The PHY's have both an RG45 for copper and an SFP module.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/unistd.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/skbuff.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mii.h>
|
||||
#include <linux/ethtool.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/marvell_phy.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <linux/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <linux/uaccess.h>
|
||||
|
||||
#include "gw16083.h"
|
||||
|
||||
#undef FAIL_ON_CHECKSUM_ERR /* fail to configure SFP if checksum bad */
|
||||
#define PORT_POWER_CONTROL /* ports can be enabled/disabled via sysfs */
|
||||
#define PORT_MODE_CONTROL /* ports 5/6 can have SFP/RJ45 mode forced */
|
||||
|
||||
MODULE_DESCRIPTION("GW16083 driver");
|
||||
MODULE_AUTHOR("Tim Harvey");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
struct mv88e1111_port_state {
|
||||
int port;
|
||||
bool present;
|
||||
bool serdes;
|
||||
bool sfp_signal;
|
||||
bool sfp_present;
|
||||
bool sfp_compat;
|
||||
bool sfp_enabled;
|
||||
char sfp_id[64];
|
||||
};
|
||||
|
||||
struct mv88e1111_priv {
|
||||
struct phy_device *phydev;
|
||||
struct i2c_client *client;
|
||||
struct mv88e1111_port_state port5;
|
||||
struct mv88e1111_port_state port6;
|
||||
struct kobject *sysfs_kobj;
|
||||
};
|
||||
|
||||
enum {
|
||||
mode_copper = 0,
|
||||
mode_serdes = 1,
|
||||
};
|
||||
|
||||
static struct i2c_client *gw16083_client = NULL;
|
||||
|
||||
static int gw16083_read_port_sfp(struct i2c_client *client,
|
||||
struct mv88e1111_port_state *state);
|
||||
|
||||
/* read switch port register from port0-6 */
|
||||
u16 read_switch_port(struct phy_device *pdev, int port, u8 regaddr)
|
||||
{
|
||||
return pdev->bus->read(pdev->bus, MV_BASE + port, regaddr);
|
||||
}
|
||||
|
||||
/* write switch port register to port0-6 */
|
||||
int write_switch_port(struct phy_device *pdev, int port, u8 regaddr, u16 val)
|
||||
{
|
||||
return pdev->bus->write(pdev->bus, MV_BASE + port, regaddr, val);
|
||||
}
|
||||
|
||||
/*
|
||||
* read_switch_port_phy - write a register for a specific port on 88E6176
|
||||
* The 88E6176 PHY registers must be accessed thorugh the Global2 address
|
||||
* using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
|
||||
*/
|
||||
int read_switch_port_phy(struct phy_device *pdev, int port, u8 regaddr)
|
||||
{
|
||||
u16 reg;
|
||||
int i;
|
||||
|
||||
dev_dbg(&pdev->dev, "read_phy: port%d reg=0x%02x\n", port, regaddr);
|
||||
reg = SMIBUSY | SMIMODE22 | SMIOP_READ;
|
||||
reg |= port << DEVADDR;
|
||||
reg |= regaddr << REGADDR;
|
||||
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
|
||||
for (i = 0; i < 10; i++) {
|
||||
reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
|
||||
MV_SMI_PHY_COMMAND);
|
||||
if (!(reg & (1<<15)))
|
||||
break;
|
||||
mdelay(1);
|
||||
}
|
||||
/* timeout */
|
||||
if (i == 10)
|
||||
return 0xffff;
|
||||
reg = pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA);
|
||||
return reg;
|
||||
}
|
||||
|
||||
/*
|
||||
* write_switch_port_phy - write a register for a specific port on 88E6176
|
||||
* The 88E6176 PHY registers must be accessed thorugh the Global2 address
|
||||
* using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
|
||||
*/
|
||||
int write_switch_port_phy(struct phy_device *pdev, int port, u8 addr, u16 reg)
|
||||
{
|
||||
int i;
|
||||
|
||||
dev_dbg(&pdev->dev, "write_phy: port%d reg=0x%02x val=0x%04x\n", port,
|
||||
addr, reg);
|
||||
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA, reg);
|
||||
reg = SMIBUSY | SMIMODE22 | SMIOP_WRITE;
|
||||
reg |= port << DEVADDR;
|
||||
reg |= addr << REGADDR;
|
||||
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
|
||||
for (i = 0; i < 10; i++) {
|
||||
reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
|
||||
MV_SMI_PHY_COMMAND);
|
||||
if (!(reg & (1<<15)))
|
||||
break;
|
||||
mdelay(1);
|
||||
}
|
||||
/* timeout */
|
||||
if (i == 10)
|
||||
return -ETIMEDOUT;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* read a scratch register from switch */
|
||||
inline u8 read_switch_scratch(struct phy_device *pdev, u8 reg)
|
||||
{
|
||||
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC, (reg << 8));
|
||||
return pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC) & 0xff;
|
||||
}
|
||||
|
||||
/* write a scratch register to switch */
|
||||
inline void write_switch_scratch(struct phy_device *pdev, u8 reg, u8 val)
|
||||
{
|
||||
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC,
|
||||
(1 << 15) | (reg << 8) | val);
|
||||
}
|
||||
|
||||
/* enable or disable an SFP's TXEN signal */
|
||||
static int enable_sfp_txen(struct phy_device *pdev, int port, bool enable)
|
||||
{
|
||||
u8 gpio;
|
||||
int bit;
|
||||
|
||||
if (port != 5 && port != 6)
|
||||
return -EINVAL;
|
||||
|
||||
/* GPIO[2:1] output low to enable TXEN */
|
||||
bit = (port == 5) ? 1 : 2;
|
||||
gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
|
||||
if (enable)
|
||||
gpio |= (1 << bit);
|
||||
else
|
||||
gpio &= (1 << bit);
|
||||
write_switch_scratch(pdev, MV_GPIO_DATA, gpio);
|
||||
dev_info(&pdev->dev, "Port%d: SFP TX %s\n", port, enable ?
|
||||
"enabled" : "disabled");
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* configure mv88e1111 port for copper or serdes
|
||||
* For Copper we set auto link/duplex/speed detection
|
||||
* For SerDes/Fiber we force 1000mbps link up and auto-neg duplex
|
||||
*/
|
||||
static int config_mv88e1111_port_sfp(struct phy_device *pdev, int port,
|
||||
bool sfp)
|
||||
{
|
||||
u16 reg;
|
||||
|
||||
if (port != 5 && port != 6)
|
||||
return -EINVAL;
|
||||
|
||||
dev_dbg(&pdev->dev, "%s: Port%d %s\n", __func__, port,
|
||||
sfp ? "SFP" : "copper");
|
||||
if (sfp) {
|
||||
enable_sfp_txen(pdev, port, 1);
|
||||
|
||||
/* configure MV88E6176 Physical Control Port Register */
|
||||
dev_info(&pdev->dev,
|
||||
"Port%d: SFP: force 1000mbps link up "
|
||||
"(auto-negotiate duplex)\n",
|
||||
port);
|
||||
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
|
||||
reg &= ~0x3f; /* clear 5-0 */
|
||||
reg |= (1 << 4) | (1 << 5); /* force link up */
|
||||
reg |= 2; /* force 1000mbps */
|
||||
write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
|
||||
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
|
||||
}
|
||||
|
||||
/* copper */
|
||||
else {
|
||||
enable_sfp_txen(pdev, port, 0);
|
||||
|
||||
/* configure MV88E6176 Physical Control Port Register */
|
||||
dev_info(&pdev->dev,
|
||||
"Port%d: Copper: set auto-neg link/duplex/speed\n",
|
||||
port);
|
||||
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
|
||||
reg &= ~0x3f; /* clear 5-0 */
|
||||
reg |= 3; /* speed not forced */
|
||||
write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
|
||||
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
|
||||
}
|
||||
dev_dbg(&pdev->dev, "%s: Port%d %s PORT_PHYS_CONTROL=0x%04x\n",
|
||||
__func__, port, sfp ? "SFP" : "copper",
|
||||
read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(PORT_POWER_CONTROL)
|
||||
static int enable_switch_port(struct phy_device *pdev, int port, bool enable)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
|
||||
u16 reg;
|
||||
|
||||
/* power up port */
|
||||
dev_info(&priv->client->dev, "Port%d: %s\n", port,
|
||||
enable ? "normal operation" : "power down");
|
||||
reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL);
|
||||
if (enable)
|
||||
reg &= ~(1 << 11); /* Normal Operation */
|
||||
else
|
||||
reg |= (1 << 11); /* power down */
|
||||
write_switch_port_phy(pdev, port, MV_PHY_CONTROL, reg);
|
||||
|
||||
reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL1);
|
||||
if (enable)
|
||||
reg &= ~(1 << 2); /* Normal Operation */
|
||||
else
|
||||
reg |= (1 << 2); /* power down */
|
||||
write_switch_port_phy(pdev, port, MV_PHY_CONTROL1, reg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Sysfs API
|
||||
*/
|
||||
|
||||
struct mv88e1111_port_state *get_port_state(struct mv88e1111_priv *priv,
|
||||
int port)
|
||||
{
|
||||
if (port == 5)
|
||||
return &priv->port5;
|
||||
if (port == 6)
|
||||
return &priv->port6;
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/*
|
||||
* get MV88E6176 port number for a specific GW16083 port name
|
||||
* The GW16083 ports as shown on the silkscreen are not mapped according to
|
||||
* the MV88E6176 ports numbers.
|
||||
*/
|
||||
static int gw16083_get_port(const char* name)
|
||||
{
|
||||
int i;
|
||||
int map[] = { 3, 2, 1, 0, 5, 6 };
|
||||
|
||||
if (strncasecmp(name, "ETHERNET", 8) != 0 || strlen(name) != 9)
|
||||
return -1;
|
||||
i = name[8] - '0';
|
||||
if (i < 1 || i > 6)
|
||||
return -1;
|
||||
return map[i-1];
|
||||
}
|
||||
|
||||
static ssize_t port_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
|
||||
int port = -1;
|
||||
u16 reg;
|
||||
|
||||
if (sscanf(attr->attr.name, "port%d", &port) != 1)
|
||||
return 0;
|
||||
if (port < 0 || port > 6)
|
||||
return 0;
|
||||
reg = read_switch_port_phy(priv->phydev, port, MV_PHY_CONTROL);
|
||||
return sprintf(buf, "%s\n", (reg & (1 << 11)) ? "disabled" : "enabled");
|
||||
}
|
||||
|
||||
#if defined(PORT_POWER_CONTROL)
|
||||
static ssize_t port_store(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
|
||||
int port = -1;
|
||||
int val;
|
||||
|
||||
port = gw16083_get_port(attr->attr.name);
|
||||
if (port < 0)
|
||||
return 0;
|
||||
if (sscanf(buf, "%d", &val) != 1)
|
||||
return 0;
|
||||
enable_switch_port(priv->phydev, port, val ? 1 : 0);
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(ethernet1, S_IWUSR | S_IRUGO, port_show, port_store);
|
||||
static DEVICE_ATTR(ethernet2, S_IWUSR | S_IRUGO, port_show, port_store);
|
||||
static DEVICE_ATTR(ethernet3, S_IWUSR | S_IRUGO, port_show, port_store);
|
||||
static DEVICE_ATTR(ethernet4, S_IWUSR | S_IRUGO, port_show, port_store);
|
||||
static DEVICE_ATTR(ethernet5, S_IWUSR | S_IRUGO, port_show, port_store);
|
||||
static DEVICE_ATTR(ethernet6, S_IWUSR | S_IRUGO, port_show, port_store);
|
||||
#else
|
||||
static DEVICE_ATTR(ethernet1, S_IRUGO, port_show, NULL);
|
||||
static DEVICE_ATTR(ethernet2, S_IRUGO, port_show, NULL);
|
||||
static DEVICE_ATTR(ethernet3, S_IRUGO, port_show, NULL);
|
||||
static DEVICE_ATTR(ethernet4, S_IRUGO, port_show, NULL);
|
||||
static DEVICE_ATTR(ethernet5, S_IRUGO, port_show, NULL);
|
||||
static DEVICE_ATTR(ethernet6, S_IRUGO, port_show, NULL);
|
||||
#endif
|
||||
|
||||
static ssize_t portsfp_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
|
||||
struct mv88e1111_port_state *state;
|
||||
|
||||
state = get_port_state(priv, gw16083_get_port(attr->attr.name));
|
||||
if (!state)
|
||||
return 0;
|
||||
|
||||
if (!state->sfp_present)
|
||||
return 0;
|
||||
|
||||
return sprintf(buf, "%s\n", state->sfp_id);
|
||||
}
|
||||
|
||||
static ssize_t portmode_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
|
||||
struct mv88e1111_port_state *state;
|
||||
|
||||
state = get_port_state(priv, gw16083_get_port(attr->attr.name));
|
||||
if (!state)
|
||||
return 0;
|
||||
|
||||
return sprintf(buf, "%s\n", state->serdes ? "SFP" : "RJ45");
|
||||
}
|
||||
static DEVICE_ATTR(ethernet5_sfp, S_IRUGO, portsfp_show, NULL);
|
||||
static DEVICE_ATTR(ethernet6_sfp, S_IRUGO, portsfp_show, NULL);
|
||||
|
||||
#ifdef PORT_MODE_CONTROL
|
||||
static ssize_t portmode_store(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
|
||||
struct mv88e1111_port_state *state;
|
||||
u16 reg;
|
||||
int port;
|
||||
|
||||
port = gw16083_get_port(attr->attr.name);
|
||||
state = get_port_state(priv, port);
|
||||
if (!state)
|
||||
return 0;
|
||||
|
||||
reg = read_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR);
|
||||
if (strcasecmp(buf, "auto") == 0) {
|
||||
reg &= ~(1<<15); /* enable auto-selection */
|
||||
dev_info(&priv->client->dev, "Port%d: enable auto-selection\n",
|
||||
port);
|
||||
} else if (strcasecmp(buf, "RJ45") == 0) {
|
||||
reg |= (1<<15); /* disable auto-selection */
|
||||
reg |= 0xb; /* RGMII to Copper */
|
||||
config_mv88e1111_port_sfp(priv->phydev, port, 0);
|
||||
dev_info(&priv->client->dev, "Port%d: select RJ45\n", port);
|
||||
} else if (strcasecmp(buf, "SFP") == 0) {
|
||||
reg |= (1<<15); /* disable auto-selection */
|
||||
reg |= 0x3; /* RGMII to Fiber */
|
||||
config_mv88e1111_port_sfp(priv->phydev, port, 1);
|
||||
dev_info(&priv->client->dev, "Port%d: select SFP\n", port);
|
||||
}
|
||||
write_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR, reg);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static DEVICE_ATTR(ethernet5_mode, S_IWUSR | S_IRUGO, portmode_show,
|
||||
portmode_store);
|
||||
static DEVICE_ATTR(ethernet6_mode, S_IWUSR | S_IRUGO, portmode_show,
|
||||
portmode_store);
|
||||
#else
|
||||
static DEVICE_ATTR(ethernet5_mode, S_IRUGO, portmode_show, NULL);
|
||||
static DEVICE_ATTR(ethernet6_mode, S_IRUGO, portmode_show, NULL);
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* PHY driver
|
||||
*/
|
||||
|
||||
static int
|
||||
mv88e6176_config_init(struct phy_device *pdev)
|
||||
{
|
||||
dev_dbg(&pdev->dev, "%s\n", __func__);
|
||||
pdev->state = PHY_RUNNING;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* check MV88E1111 PHY status and MV88E6176 GPIO */
|
||||
static int
|
||||
mv88e6176_read_status(struct phy_device *pdev)
|
||||
{
|
||||
struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
|
||||
struct mv88e1111_port_state *state;
|
||||
bool serdes, sfp_present, sfp_signal;
|
||||
int port;
|
||||
int ret = 0;
|
||||
u16 gpio;
|
||||
|
||||
dev_dbg(&pdev->dev, "%s", __func__);
|
||||
gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
|
||||
for (port = 5; port < 7; port++) {
|
||||
serdes = (read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_SR)
|
||||
& (1<<13)) ? 1 : 0;
|
||||
dev_dbg(&pdev->dev, "%s: Port%d GPIO:0x%02x SerDes:%d\n",
|
||||
__func__, port, gpio, serdes);
|
||||
switch(port) {
|
||||
case 5:
|
||||
state = &priv->port5;
|
||||
sfp_present = !((gpio >> 5) & 1);
|
||||
sfp_signal = !((gpio >> 6) & 1);
|
||||
break;
|
||||
case 6:
|
||||
state = &priv->port6;
|
||||
sfp_present = !((gpio >> 3) & 1);
|
||||
sfp_signal = !((gpio >> 4) & 1);
|
||||
break;
|
||||
}
|
||||
|
||||
/*
|
||||
* on sfp_detect read/verify SFP MSA and set sfp_compat
|
||||
* on sfp_signal issue link down?
|
||||
* on serdes auto-select
|
||||
*/
|
||||
if (state->sfp_present != sfp_present) {
|
||||
state->sfp_present = sfp_present;
|
||||
dev_info(&pdev->dev, "Port%d: SFP %s\n",
|
||||
port, sfp_present ? "inserted" : "removed");
|
||||
if (state->sfp_present) {
|
||||
if (gw16083_read_port_sfp(priv->client, state))
|
||||
state->sfp_compat = false;
|
||||
else
|
||||
state->sfp_compat = true;
|
||||
/* trigger a re-select/enable below */
|
||||
state->serdes = !serdes;
|
||||
pdev->state = PHY_RUNNING;
|
||||
} else {
|
||||
state->sfp_compat = false;
|
||||
state->sfp_enabled = false;
|
||||
pdev->state = PHY_NOLINK;
|
||||
}
|
||||
}
|
||||
if (state->sfp_signal != sfp_signal) {
|
||||
state->sfp_signal = sfp_signal;
|
||||
dev_info(&pdev->dev, "Port%d: SFP signal %s\n",
|
||||
port, sfp_signal ? "detected" : "lost");
|
||||
}
|
||||
if (state->serdes != serdes) {
|
||||
state->serdes = serdes;
|
||||
dev_info(&pdev->dev, "Port%d: %s auto-selected\n",
|
||||
port, serdes ? "SERDES" : "copper");
|
||||
|
||||
/*
|
||||
* if auto-selection has switched to copper
|
||||
* disable serdes
|
||||
*/
|
||||
if (!serdes) {
|
||||
config_mv88e1111_port_sfp(pdev, port, 0);
|
||||
state->sfp_enabled = false;
|
||||
}
|
||||
}
|
||||
|
||||
/* if compatible SFP module and not yet enabled then enable */
|
||||
if (state->sfp_compat && state->sfp_signal &&
|
||||
!state->sfp_enabled)
|
||||
{
|
||||
if (!config_mv88e1111_port_sfp(pdev, port, 1))
|
||||
state->sfp_enabled = true;
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mv88e6176_config_aneg(struct phy_device *pdev)
|
||||
{
|
||||
dev_dbg(&pdev->dev, "%s", __func__);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
mv88e6176_remove(struct phy_device *pdev)
|
||||
{
|
||||
dev_dbg(&pdev->dev, "%s", __func__);
|
||||
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet1);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet2);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet3);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet4);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet5);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet6);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet5_sfp);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet6_sfp);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet5_mode);
|
||||
device_remove_file(&pdev->dev, &dev_attr_ethernet6_mode);
|
||||
sysfs_remove_link(kernel_kobj, "gw16083");
|
||||
}
|
||||
|
||||
static int
|
||||
mv88e6176_probe(struct phy_device *pdev)
|
||||
{
|
||||
int port;
|
||||
int ret = 0;
|
||||
u32 id, reg;
|
||||
struct mv88e1111_priv *priv;
|
||||
|
||||
dev_dbg(&pdev->dev, "%s: addr=0x%02x bus=%s:%s gw16083_client=%p\n",
|
||||
__func__, pdev->addr, pdev->bus->name, pdev->bus->id,
|
||||
gw16083_client);
|
||||
|
||||
/* In single-chip addressing mode the MV88E6176 shows up on 0x10-0x16 */
|
||||
if (pdev->addr != MV_BASE)
|
||||
return 0;
|
||||
|
||||
/* i2c driver needs to be loaded first */
|
||||
if (!gw16083_client)
|
||||
return 0;
|
||||
|
||||
/* gw16083 has MV88E1676 hanging off of i210 mdio bus */
|
||||
if (strcmp(pdev->bus->name, "igb_enet_mii_bus") != 0)
|
||||
return 0;
|
||||
|
||||
//dev_info(&pdev->dev, "Detected");
|
||||
dev_info(&gw16083_client->dev, "%s: MV88E6176 7-port switch detected",
|
||||
pdev->bus->id);
|
||||
|
||||
/*
|
||||
* port5/6 config: MV88E1111 PHY
|
||||
* Register 20: PHY Control Register
|
||||
* R20_7: add delay to RX_CLK for RXD
|
||||
* R20_1: add delay to TX_CLK for TXD
|
||||
* Register 24: LED Control Register
|
||||
* 0x4111:
|
||||
* Pulse stretch 170 to 340 ms
|
||||
* Register 0: Control Register
|
||||
* R0_15: phy reset
|
||||
*/
|
||||
for (port = 5; port < 7; port++) {
|
||||
#ifndef RGMII_DELAY_ON_PHY
|
||||
write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, 0xC003);
|
||||
#endif
|
||||
|
||||
id = read_switch_port_phy(pdev, port,
|
||||
MII_M1111_PHY_IDENT0) << 16;
|
||||
id |= read_switch_port_phy(pdev, port, MII_M1111_PHY_IDENT1);
|
||||
if ((id & MII_M1111_PHY_ID_MASK) != MII_M1111_PHY_ID) {
|
||||
dev_err(&gw16083_client->dev,
|
||||
"Port%d: No MV88E1111 PHY detected", port);
|
||||
return 0;
|
||||
//continue;
|
||||
}
|
||||
|
||||
#ifdef RGMII_DELAY_ON_PHY
|
||||
/* phy rx/tx delay */
|
||||
reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR);
|
||||
reg |= (1<<1) | (1<<7);
|
||||
write_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR, reg);
|
||||
#endif
|
||||
/* led config */
|
||||
write_switch_port_phy(pdev, port, MII_M1111_PHY_LED_CONTROL,
|
||||
MII_M1111_PHY_LED_PULSE_STR);
|
||||
/* reset phy */
|
||||
reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL);
|
||||
reg |= MII_M1111_PHY_CONTROL_RESET;
|
||||
write_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL, reg);
|
||||
dev_info(&gw16083_client->dev,
|
||||
"Port%d MV88E111 PHY configured\n", port);
|
||||
}
|
||||
|
||||
/*
|
||||
* GPIO Configuration:
|
||||
* GPIO1: FIB5_TXEN# (output)
|
||||
* GPIO2: FIB6_TXEN# (output)
|
||||
* GPIO3: FIB6_PRES# (input)
|
||||
* GPIO4: FIB6_LOS (input)
|
||||
* GPIO5: FIB5_PRES# (input)
|
||||
* GPIO6: FIB5_LOS (input)
|
||||
*/
|
||||
write_switch_scratch(pdev, MV_GPIO_DATA, 0x06); /* GPIO[2:1] out hi */
|
||||
write_switch_scratch(pdev, MV_GPIO_DIR, 0x78); /* GPIO[6:3] inp */
|
||||
|
||||
pdev->irq = PHY_POLL;
|
||||
|
||||
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
memset(priv, 0, sizeof(*priv));
|
||||
priv->phydev = pdev;
|
||||
priv->client = gw16083_client;
|
||||
priv->port5.port = 5;
|
||||
priv->port6.port = 6;
|
||||
dev_set_drvdata(&pdev->dev, priv);
|
||||
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet1);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet2);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet3);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet4);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_sfp);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_sfp);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_mode);
|
||||
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_mode);
|
||||
|
||||
if (unlikely(ret))
|
||||
dev_err(&pdev->dev, "Failed creating attrs\n");
|
||||
|
||||
/* Add a nice symlink to the real device */
|
||||
ret = sysfs_create_link(kernel_kobj, &pdev->dev.kobj, "gw16083");
|
||||
|
||||
dev_dbg(&pdev->dev, "initial state: GPIO=0x%02x "
|
||||
"Port5_serdes=%d Port6_serdes=%d\n",
|
||||
read_switch_scratch(pdev, MV_GPIO_DATA),
|
||||
(read_switch_port_phy(pdev, 5, MII_M1111_PHY_EXT_SR)
|
||||
& (1<<13) ? 1:0),
|
||||
(read_switch_port_phy(pdev, 6, MII_M1111_PHY_EXT_SR)
|
||||
& (1<<13) ? 1:0));
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct phy_driver mv88e6176_phy_driver = {
|
||||
.name = "MV88E6176",
|
||||
.phy_id = MV_IDENT_VALUE,
|
||||
.phy_id_mask = MV_IDENT_MASK,
|
||||
.features = PHY_BASIC_FEATURES,
|
||||
.probe = &mv88e6176_probe,
|
||||
.remove = &mv88e6176_remove,
|
||||
.config_init = &mv88e6176_config_init,
|
||||
.config_aneg = &mv88e6176_config_aneg,
|
||||
.read_status = &mv88e6176_read_status,
|
||||
.driver = { .owner = THIS_MODULE },
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C driver
|
||||
*/
|
||||
|
||||
/* See SFF-8472 */
|
||||
struct sfp_msa {
|
||||
/* Basic ID fields */
|
||||
u8 identifier;
|
||||
u8 ext_identifier;
|
||||
u8 connector;
|
||||
u8 transceiver[8];
|
||||
u8 encoding;
|
||||
u8 br_nominal;
|
||||
u8 rate_identifier;
|
||||
u8 length_smf_km;
|
||||
u8 length_smf;
|
||||
u8 length_om2;
|
||||
u8 length_om1;
|
||||
u8 length_om4;
|
||||
u8 length_om3;
|
||||
u8 vendor_name[16];
|
||||
u8 transceiver2;
|
||||
u8 vendor_oui[3];
|
||||
u8 vendor_pn[16];
|
||||
u8 vendor_rev[4];
|
||||
u8 wavelength[2];
|
||||
u8 resv1;
|
||||
u8 cc_base;
|
||||
|
||||
/* extended id fields */
|
||||
u8 options[2];
|
||||
u8 br_max;
|
||||
u8 br_min;
|
||||
u8 vendor_sn[16];
|
||||
u8 date_code[8];
|
||||
u8 diags_type;
|
||||
u8 enhanced_options;
|
||||
u8 sff8472_compliance;
|
||||
u8 cc_ext;
|
||||
|
||||
/* Vendor specific ID fields */
|
||||
u8 vendor_data[32];
|
||||
u8 sff8079[128];
|
||||
};
|
||||
|
||||
enum identifier {
|
||||
UNKNOWN,
|
||||
GBIC,
|
||||
SFF,
|
||||
SFP,
|
||||
XBI,
|
||||
XENPACK,
|
||||
XFP,
|
||||
XFF,
|
||||
XFP_E,
|
||||
XPAK,
|
||||
X2,
|
||||
DWDM_SFP,
|
||||
QSFP,
|
||||
MAX_ID,
|
||||
};
|
||||
|
||||
const char* id_names[] = {
|
||||
"UNKONWN",
|
||||
"GBIC",
|
||||
"SFF",
|
||||
"SFP",
|
||||
NULL,
|
||||
};
|
||||
|
||||
/* Flags for SFP modules compatible with ETH up to 1Gb */
|
||||
struct sfp_flags {
|
||||
u8 e1000_base_sx:1;
|
||||
u8 e1000_base_lx:1;
|
||||
u8 e1000_base_cx:1;
|
||||
u8 e1000_base_t:1;
|
||||
u8 e100_base_lx:1;
|
||||
u8 e100_base_fx:1;
|
||||
u8 e10_base_bx10:1;
|
||||
u8 e10_base_px:1;
|
||||
};
|
||||
|
||||
#define STRING_APPEND(str, src) \
|
||||
strncat(str, src, sizeof(src)); \
|
||||
for (i = 1; i < sizeof(str); i++) \
|
||||
if (str[i-1] == ' ' && str[i] == ' ') \
|
||||
str[i] = 0;
|
||||
|
||||
static int gw16083_read_port_sfp(struct i2c_client *client,
|
||||
struct mv88e1111_port_state *state)
|
||||
{
|
||||
int ret = 0;
|
||||
u8 data[256];
|
||||
struct sfp_flags *eth_flags;
|
||||
u8 crc;
|
||||
int i;
|
||||
u8 *str;
|
||||
struct sfp_msa *sfp_msa = (struct sfp_msa *)data;
|
||||
int port = state->port;
|
||||
union i2c_smbus_data d;
|
||||
|
||||
dev_dbg(&client->dev, "%s Port%d\n", __func__, port);
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_READ_I2C_BLOCK))
|
||||
return -ENODEV;
|
||||
d.byte = (port == 5) ? 1 : 2;
|
||||
if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_PCA9543,
|
||||
client->flags, I2C_SMBUS_WRITE, 0,
|
||||
I2C_SMBUS_BYTE_DATA, &d) < 0)
|
||||
{
|
||||
dev_err(&client->dev,
|
||||
"Port%d: failed writing PCA9543 register\n", port);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* read all 256 bytes of SFP EEPROM */
|
||||
for (i = 0; i < sizeof(data); i += I2C_SMBUS_BLOCK_MAX) {
|
||||
d.block[0] = I2C_SMBUS_BLOCK_MAX;
|
||||
if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_SFP1,
|
||||
client->flags, I2C_SMBUS_READ, i,
|
||||
I2C_SMBUS_I2C_BLOCK_DATA, &d) < 0)
|
||||
{
|
||||
dev_err(&client->dev,
|
||||
"Port%d: failed reading SFP data\n", port);
|
||||
return ret;
|
||||
}
|
||||
memcpy(data + i, d.block + 1, I2C_SMBUS_BLOCK_MAX);
|
||||
}
|
||||
|
||||
/* Validate checksums */
|
||||
for (crc = 0, i = 0; i < 63; i++)
|
||||
crc += data[i];
|
||||
if (crc != sfp_msa->cc_base) {
|
||||
dev_err(&client->dev, "Port%d: "
|
||||
"Checksum failure for Base ID fields: 0x%02x\n", port,
|
||||
crc);
|
||||
#ifdef FAIL_ON_CHECKSUM_ERR
|
||||
return -EINVAL;
|
||||
#endif
|
||||
}
|
||||
for (crc = 0, i = 64; i < 95; i++)
|
||||
crc += data[i];
|
||||
if (crc != sfp_msa->cc_ext) {
|
||||
dev_err(&client->dev, "Port%d: "
|
||||
"Checksum failure for Extended ID fields: 0x%02x\n",
|
||||
port, crc);
|
||||
#ifdef FAIL_ON_CHECKSUM_ERR
|
||||
return -EINVAL;
|
||||
#endif
|
||||
}
|
||||
state->sfp_id[0] = 0;
|
||||
for (i = 0; id_names[i]; i++) {
|
||||
if (sfp_msa->identifier == i) {
|
||||
sprintf(state->sfp_id, "%s: ", id_names[i]);
|
||||
break;
|
||||
}
|
||||
}
|
||||
STRING_APPEND(state->sfp_id, sfp_msa->vendor_oui);
|
||||
STRING_APPEND(state->sfp_id, sfp_msa->vendor_name);
|
||||
STRING_APPEND(state->sfp_id, sfp_msa->vendor_pn);
|
||||
STRING_APPEND(state->sfp_id, sfp_msa->vendor_rev);
|
||||
STRING_APPEND(state->sfp_id, sfp_msa->vendor_sn);
|
||||
dev_info(&client->dev, "Port%d: %s\n", port, state->sfp_id);
|
||||
|
||||
if ((sfp_msa->identifier != GBIC) &&
|
||||
(sfp_msa->identifier != SFF) &&
|
||||
(sfp_msa->identifier != SFP))
|
||||
{
|
||||
dev_err(&client->dev, "Port%d: Unknown module identifier: %d\n",
|
||||
port, sfp_msa->identifier);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
str = "";
|
||||
eth_flags = (struct sfp_flags *)(sfp_msa->transceiver + 3);
|
||||
if (eth_flags->e1000_base_sx) {
|
||||
str = "1000Base-SX (Fiber)";
|
||||
} else if (eth_flags->e1000_base_lx) {
|
||||
str = "1000Base-LX (Fiber)";
|
||||
} else if (eth_flags->e1000_base_t) {
|
||||
str = "1000Base-T (Copper)";
|
||||
} else if (eth_flags->e100_base_fx) {
|
||||
str = "100Base-FX (Fiber) - not supported";
|
||||
ret = -EINVAL;
|
||||
} else {
|
||||
str = "Unknown/Unsupported media type";
|
||||
ret = -EINVAL;
|
||||
}
|
||||
if (ret)
|
||||
dev_err(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
|
||||
sfp_msa->transceiver[3]);
|
||||
else
|
||||
dev_info(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
|
||||
sfp_msa->transceiver[3]);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int gw16083_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret;
|
||||
|
||||
dev_info(&client->dev, "GW16083 Ethernet Expansion Mezzanine\n");
|
||||
if (gw16083_client) {
|
||||
dev_err(&client->dev, "client already registered\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
gw16083_client = client;
|
||||
|
||||
ret = phy_driver_register(&mv88e6176_phy_driver);
|
||||
if (ret)
|
||||
dev_err(&client->dev,
|
||||
"failed to register mv88e6176 phy driver: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int gw16083_remove(struct i2c_client *client)
|
||||
{
|
||||
dev_dbg(&client->dev, "%s\n", __func__);
|
||||
|
||||
phy_driver_unregister(&mv88e6176_phy_driver);
|
||||
gw16083_client = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id gw16083_dt_ids[] = {
|
||||
{ .compatible = "gateworks,gw16083", },
|
||||
{ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, gw16083_dt_ids);
|
||||
|
||||
static const struct i2c_device_id gw16083_id[] = {
|
||||
{ "gw16083", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, gw16083_id);
|
||||
|
||||
static struct i2c_driver gw16083_driver = {
|
||||
.driver = {
|
||||
.name = "gw16083",
|
||||
.of_match_table = gw16083_dt_ids,
|
||||
},
|
||||
.probe = gw16083_probe,
|
||||
.remove = gw16083_remove,
|
||||
.id_table = gw16083_id,
|
||||
};
|
||||
|
||||
static int __init mv88e6176_init(void)
|
||||
{
|
||||
return i2c_add_driver(&gw16083_driver);
|
||||
}
|
||||
|
||||
static void __exit mv88e6176_exit(void)
|
||||
{
|
||||
i2c_del_driver(&gw16083_driver);
|
||||
}
|
||||
|
||||
module_init(mv88e6176_init);
|
||||
module_exit(mv88e6176_exit);
|
||||
|
|
@ -0,0 +1,123 @@
|
|||
/*
|
||||
* drivers/net/phy/mv88e6176.h
|
||||
*
|
||||
* Driver for Marvell Switch
|
||||
*
|
||||
* Author: Tim Harvey
|
||||
*
|
||||
* Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef _GW16083_H_
|
||||
#define _GW16083_H_
|
||||
|
||||
#define MII_MARVELL_PHY_PAGE 22
|
||||
|
||||
/*
|
||||
* I2C Addresses
|
||||
*/
|
||||
#define GW16083_I2C_ADDR_SFP1 0x50
|
||||
#define GW16083_I2C_ADDR_SFP2 0x51
|
||||
#define GW16083_I2C_ADDR_EEPROM 0x52
|
||||
#define GW16083_I2C_ADDR_PCA9543 0x70
|
||||
|
||||
/*
|
||||
* MV88E1111 PHY Registers
|
||||
*/
|
||||
enum {
|
||||
MII_M1111_PHY_CONTROL = 0,
|
||||
MII_M1111_PHY_STATUS = 1,
|
||||
MII_M1111_PHY_IDENT0 = 2,
|
||||
MII_M1111_PHY_IDENT1 = 3,
|
||||
MII_M1111_PHY_EXT_CR = 20,
|
||||
MII_M1111_PHY_LED_CONTROL = 24,
|
||||
MII_M1111_PHY_EXT_SR = 27,
|
||||
};
|
||||
|
||||
#define MII_M1111_PHY_ID_MASK 0xfffffff0
|
||||
#define MII_M1111_PHY_ID 0x01410cc0
|
||||
|
||||
#define MII_M1111_PHY_CONTROL_RESET (1 << 15)
|
||||
#define MII_M1111_PHY_LED_DIRECT 0x4100
|
||||
#define MII_M1111_PHY_LED_PULSE_STR 0x4111
|
||||
#define MII_M1111_PHY_LED_COMBINE 0x411c
|
||||
#define MII_M1111_RX_DELAY 0x80
|
||||
#define MII_M1111_TX_DELAY 0x2
|
||||
|
||||
/*
|
||||
* MV88E6176 Switch Registers
|
||||
*/
|
||||
|
||||
/* PHY Addrs */
|
||||
#define MV_BASE 0x10
|
||||
#define MV_GLOBAL1 0x1b
|
||||
#define MV_GLOBAL2 0x1c
|
||||
#define MV_GLOBAL3 0x1d
|
||||
|
||||
/* Global2 Registers */
|
||||
enum {
|
||||
MV_SMI_PHY_COMMAND = 0x18,
|
||||
MV_SMI_PHY_DATA = 0x19,
|
||||
MV_SCRATCH_MISC = 0x1A,
|
||||
};
|
||||
|
||||
/* Scratch And Misc Reg offsets */
|
||||
enum {
|
||||
MV_GPIO_MODE = 0x60,
|
||||
MV_GPIO_DIR = 0x62,
|
||||
MV_GPIO_DATA = 0x64,
|
||||
MV_GPIO76_CNTL = 0x6B,
|
||||
MV_GPIO54_CNTL = 0x6A,
|
||||
MV_GPIO32_CNTL = 0x69,
|
||||
MV_GPIO10_CNTL = 0x68,
|
||||
MV_CONFIG0 = 0x70,
|
||||
MV_CONFIG1 = 0x71,
|
||||
MV_CONFIG2 = 0x72,
|
||||
MV_CONFIG3 = 0x73,
|
||||
};
|
||||
|
||||
/* PHY Registers */
|
||||
enum {
|
||||
MV_PHY_CONTROL = 0x00,
|
||||
MV_PHY_STATUS = 0x01,
|
||||
MV_PHY_IDENT0 = 0x02,
|
||||
MV_PHY_IDENT1 = 0x03,
|
||||
MV_PHY_ANEG = 0x04,
|
||||
MV_PHY_LINK_ABILITY = 0x05,
|
||||
MV_PHY_ANEG_EXPAND = 0x06,
|
||||
MV_PHY_XMIT_NEXTP = 0x07,
|
||||
MV_PHY_LINK_NEXTP = 0x08,
|
||||
MV_PHY_CONTROL1 = 0x10,
|
||||
MV_PHY_STATUS1 = 0x11,
|
||||
MV_PHY_INTR_EN = 0x12,
|
||||
};
|
||||
|
||||
/* Port Registers */
|
||||
enum {
|
||||
MV_PORT_STATUS = 0x00,
|
||||
MV_PORT_PHYS_CONTROL = 0x01,
|
||||
MV_PORT_IDENT = 0x03,
|
||||
MV_PORT_CONTROL = 0x04,
|
||||
MV_PORT_VLANMAP = 0x06,
|
||||
MV_PORT_ASSOC = 0x0b,
|
||||
MV_PORT_RXCOUNT = 0x10,
|
||||
MV_PORT_TXCOUNT = 0x11,
|
||||
};
|
||||
|
||||
#define SMIBUSY (1<<15)
|
||||
#define SMIMODE22 (1<<12)
|
||||
#define SMIOP_READ (2<<10)
|
||||
#define SMIOP_WRITE (1<<10)
|
||||
#define DEVADDR 5
|
||||
#define REGADDR 0
|
||||
|
||||
#define MV_IDENT_MASK 0x0000fff0
|
||||
#define MV_IDENT_VALUE 0x00001760
|
||||
|
||||
#endif /* _GW16083_H_ */
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
|
||||
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
|
||||
@@ -19,4 +19,8 @@
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttymxc0,115200";
|
||||
+ };
|
||||
};
|
||||
|
|
@ -0,0 +1,129 @@
|
|||
Author: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu May 15 00:12:26 2014 -0700
|
||||
|
||||
net: igb: add i210/i211 support for phy read/write
|
||||
|
||||
The i210/i211 uses the MDICNFG register for the phy address instead of the
|
||||
MDIC register.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
@@ -135,7 +135,7 @@ out:
|
||||
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
- u32 i, mdic = 0;
|
||||
+ u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
if (offset > MAX_PHY_REG_ADDRESS) {
|
||||
@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
||||
* Control register. The MAC will take care of interfacing with the
|
||||
* PHY to retrieve the desired data.
|
||||
*/
|
||||
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
- (E1000_MDIC_OP_READ));
|
||||
+ switch (hw->mac.type) {
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (E1000_MDIC_OP_READ));
|
||||
+ break;
|
||||
+ default:
|
||||
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (E1000_MDIC_OP_READ));
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
wr32(E1000_MDIC, mdic);
|
||||
+ wrfl();
|
||||
|
||||
/* Poll the ready bit to see if the MDI read completed
|
||||
* Increasing the time out as testing showed failures with
|
||||
@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
||||
*data = (u16) mdic;
|
||||
|
||||
out:
|
||||
+ switch (hw->mac.type) {
|
||||
+ /* restore MDICNFG to have phy's addr */
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ break;
|
||||
+ default:
|
||||
+ break;
|
||||
+ }
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
@@ -191,7 +217,7 @@ out:
|
||||
s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
- u32 i, mdic = 0;
|
||||
+ u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
if (offset > MAX_PHY_REG_ADDRESS) {
|
||||
@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
* Control register. The MAC will take care of interfacing with the
|
||||
* PHY to retrieve the desired data.
|
||||
*/
|
||||
- mdic = (((u32)data) |
|
||||
- (offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
- (E1000_MDIC_OP_WRITE));
|
||||
+ switch (hw->mac.type) {
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ mdic = (((u32)data) |
|
||||
+ (offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (E1000_MDIC_OP_WRITE));
|
||||
+ break;
|
||||
+ default:
|
||||
+ mdic = (((u32)data) |
|
||||
+ (offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (E1000_MDIC_OP_WRITE));
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
wr32(E1000_MDIC, mdic);
|
||||
+ wrfl();
|
||||
|
||||
/* Poll the ready bit to see if the MDI read completed
|
||||
* Increasing the time out as testing showed failures with
|
||||
@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
}
|
||||
|
||||
out:
|
||||
+ switch (hw->mac.type) {
|
||||
+ /* restore MDICNFG to have phy's addr */
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ break;
|
||||
+ default:
|
||||
+ break;
|
||||
+ }
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,260 @@
|
|||
From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
|
||||
From: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu, 15 May 2014 00:29:18 -0700
|
||||
Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
|
||||
|
||||
Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
|
||||
The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
|
||||
to this function.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/igb/e1000_82575.c | 4 +-
|
||||
drivers/net/ethernet/intel/igb/e1000_phy.c | 74 +++++++++++++++++++---------
|
||||
drivers/net/ethernet/intel/igb/e1000_phy.h | 6 ++-
|
||||
3 files changed, 58 insertions(+), 26 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
@@ -2129,7 +2129,7 @@ static s32 igb_read_phy_reg_82580(struct
|
||||
if (ret_val)
|
||||
goto out;
|
||||
|
||||
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
@@ -2154,7 +2154,7 @@ static s32 igb_write_phy_reg_82580(struc
|
||||
if (ret_val)
|
||||
goto out;
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
@@ -132,9 +132,8 @@ out:
|
||||
* Reads the MDI control regsiter in the PHY at offset and stores the
|
||||
* information read to data.
|
||||
**/
|
||||
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
|
||||
{
|
||||
- struct e1000_phy_info *phy = &hw->phy;
|
||||
u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
@@ -153,14 +152,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
||||
case e1000_i211:
|
||||
mdicnfg = rd32(E1000_MDICNFG);
|
||||
mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
wr32(E1000_MDICNFG, mdicnfg);
|
||||
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
(E1000_MDIC_OP_READ));
|
||||
break;
|
||||
default:
|
||||
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (addr << E1000_MDIC_PHY_SHIFT) |
|
||||
(E1000_MDIC_OP_READ));
|
||||
break;
|
||||
}
|
||||
@@ -214,9 +213,8 @@ out:
|
||||
*
|
||||
* Writes data to MDI control register in the PHY at offset.
|
||||
**/
|
||||
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
|
||||
{
|
||||
- struct e1000_phy_info *phy = &hw->phy;
|
||||
u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
@@ -235,7 +233,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
case e1000_i211:
|
||||
mdicnfg = rd32(E1000_MDICNFG);
|
||||
mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
wr32(E1000_MDICNFG, mdicnfg);
|
||||
mdic = (((u32)data) |
|
||||
(offset << E1000_MDIC_REG_SHIFT) |
|
||||
@@ -244,7 +242,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
default:
|
||||
mdic = (((u32)data) |
|
||||
(offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (addr << E1000_MDIC_PHY_SHIFT) |
|
||||
(E1000_MDIC_OP_WRITE));
|
||||
break;
|
||||
}
|
||||
@@ -464,7 +462,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
|
||||
goto out;
|
||||
|
||||
if (offset > MAX_PHY_MULTI_PAGE_REG) {
|
||||
- ret_val = igb_write_phy_reg_mdic(hw,
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
if (ret_val) {
|
||||
@@ -473,8 +471,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
|
||||
}
|
||||
}
|
||||
|
||||
- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
- data);
|
||||
+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
|
||||
+ MAX_PHY_REG_ADDRESS & offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
@@ -503,7 +501,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
|
||||
goto out;
|
||||
|
||||
if (offset > MAX_PHY_MULTI_PAGE_REG) {
|
||||
- ret_val = igb_write_phy_reg_mdic(hw,
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
if (ret_val) {
|
||||
@@ -512,8 +510,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
|
||||
}
|
||||
}
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
- data);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
|
||||
+ MAX_PHY_REG_ADDRESS & offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
@@ -2464,8 +2462,9 @@ out:
|
||||
}
|
||||
|
||||
/**
|
||||
- * igb_write_phy_reg_gs40g - Write GS40G PHY register
|
||||
+ * igb_write_reg_gs40g - Write GS40G PHY register
|
||||
* @hw: pointer to the HW structure
|
||||
+ * @addr: phy address to write to
|
||||
* @offset: lower half is register offset to write to
|
||||
* upper half is page to use.
|
||||
* @data: data to write at register offset
|
||||
@@ -2473,7 +2472,7 @@ out:
|
||||
* Acquires semaphore, if necessary, then writes the data to PHY register
|
||||
* at the offset. Release any acquired semaphores before exiting.
|
||||
**/
|
||||
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
|
||||
{
|
||||
s32 ret_val;
|
||||
u16 page = offset >> GS40G_PAGE_SHIFT;
|
||||
@@ -2483,10 +2482,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
|
||||
|
||||
release:
|
||||
hw->phy.ops.release(hw);
|
||||
@@ -2494,8 +2493,24 @@ release:
|
||||
}
|
||||
|
||||
/**
|
||||
- * igb_read_phy_reg_gs40g - Read GS40G PHY register
|
||||
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
|
||||
+ * @hw: pointer to the HW structure
|
||||
+ * @offset: lower half is register offset to write to
|
||||
+ * upper half is page to use.
|
||||
+ * @data: data to write at register offset
|
||||
+ *
|
||||
+ * Acquires semaphore, if necessary, then writes the data to PHY register
|
||||
+ * at the offset. Release any acquired semaphores before exiting.
|
||||
+ **/
|
||||
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
+{
|
||||
+ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * igb_read_reg_gs40g - Read GS40G PHY register
|
||||
* @hw: pointer to the HW structure
|
||||
+ * @addr: phy address to read from
|
||||
* @offset: lower half is register offset to read to
|
||||
* upper half is page to use.
|
||||
* @data: data to read at register offset
|
||||
@@ -2503,7 +2518,7 @@ release:
|
||||
* Acquires semaphore, if necessary, then reads the data in the PHY register
|
||||
* at the offset. Release any acquired semaphores before exiting.
|
||||
**/
|
||||
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
|
||||
{
|
||||
s32 ret_val;
|
||||
u16 page = offset >> GS40G_PAGE_SHIFT;
|
||||
@@ -2513,10 +2528,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
|
||||
|
||||
release:
|
||||
hw->phy.ops.release(hw);
|
||||
@@ -2524,6 +2539,21 @@ release:
|
||||
}
|
||||
|
||||
/**
|
||||
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
|
||||
+ * @hw: pointer to the HW structure
|
||||
+ * @offset: lower half is register offset to read to
|
||||
+ * upper half is page to use.
|
||||
+ * @data: data to read at register offset
|
||||
+ *
|
||||
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
|
||||
+ * at the offset. Release any acquired semaphores before exiting.
|
||||
+ **/
|
||||
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
+{
|
||||
+ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
* igb_set_master_slave_mode - Setup PHY for Master/slave mode
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
|
||||
@@ -61,8 +61,8 @@ s32 igb_phy_has_link(struct e1000_hw *h
|
||||
void igb_power_up_phy_copper(struct e1000_hw *hw);
|
||||
void igb_power_down_phy_copper(struct e1000_hw *hw);
|
||||
s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
|
||||
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
|
||||
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
|
||||
s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
|
||||
@@ -72,6 +72,8 @@ s32 igb_phy_force_speed_duplex_82580(st
|
||||
s32 igb_get_cable_length_82580(struct e1000_hw *hw);
|
||||
s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
|
||||
+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
|
||||
s32 igb_check_polarity_m88(struct e1000_hw *hw);
|
||||
|
||||
/* IGP01E1000 Specific Registers */
|
||||
|
|
@ -0,0 +1,308 @@
|
|||
From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
|
||||
From: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu, 15 May 2014 12:36:23 -0700
|
||||
Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
|
||||
|
||||
If an i210 is configured for 1000BASE-BX link_mode and has an external phy
|
||||
specified, then register an mii bus using the external phy address as
|
||||
a mask.
|
||||
|
||||
An i210 hooked to an external standard phy will be configured with a link_mo
|
||||
of SGMII in which case phy ops will be configured and used internall in the
|
||||
igb driver for link status. However, in certain cases one might be using a
|
||||
backplane SerDes connection to something that talks on the mdio bus but is
|
||||
not a standard phy, such as a switch. In this case by registering an mdio
|
||||
bus a phy driver can manage the device.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/igb/e1000_82575.c | 15 +++
|
||||
drivers/net/ethernet/intel/igb/e1000_hw.h | 7 ++
|
||||
drivers/net/ethernet/intel/igb/igb_main.c | 168 ++++++++++++++++++++++++++-
|
||||
3 files changed, 185 insertions(+), 5 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
@@ -598,13 +598,25 @@ static s32 igb_get_invariants_82575(stru
|
||||
switch (link_mode) {
|
||||
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
|
||||
hw->phy.media_type = e1000_media_type_internal_serdes;
|
||||
+ if (igb_sgmii_uses_mdio_82575(hw)) {
|
||||
+ u32 mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
|
||||
+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
|
||||
+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
|
||||
+ hw->phy.addr);
|
||||
+ } else {
|
||||
+ hw_dbg("1000BASE_KX");
|
||||
+ }
|
||||
break;
|
||||
case E1000_CTRL_EXT_LINK_MODE_SGMII:
|
||||
/* Get phy control interface type set (MDIO vs. I2C)*/
|
||||
if (igb_sgmii_uses_mdio_82575(hw)) {
|
||||
hw->phy.media_type = e1000_media_type_copper;
|
||||
dev_spec->sgmii_active = true;
|
||||
+ hw_dbg("SGMII with external MDIO PHY");
|
||||
break;
|
||||
+ } else {
|
||||
+ hw_dbg("SGMII with external I2C PHY");
|
||||
}
|
||||
/* fall through for I2C based SGMII */
|
||||
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
|
||||
@@ -621,8 +633,11 @@ static s32 igb_get_invariants_82575(stru
|
||||
hw->phy.media_type = e1000_media_type_copper;
|
||||
dev_spec->sgmii_active = true;
|
||||
}
|
||||
+ hw_dbg("SERDES with external SFP");
|
||||
|
||||
break;
|
||||
+ } else {
|
||||
+ hw_dbg("SERDES");
|
||||
}
|
||||
|
||||
/* do not change link mode for 100BaseFX */
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
|
||||
@@ -27,6 +27,7 @@
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/netdevice.h>
|
||||
+#include <linux/phy.h>
|
||||
|
||||
#include "e1000_regs.h"
|
||||
#include "e1000_defines.h"
|
||||
@@ -543,6 +544,12 @@ struct e1000_hw {
|
||||
struct e1000_mbx_info mbx;
|
||||
struct e1000_host_mng_dhcp_cookie mng_cookie;
|
||||
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ /* Phylib and MDIO interface */
|
||||
+ struct mii_bus *mii_bus;
|
||||
+ struct phy_device *phy_dev;
|
||||
+ phy_interface_t phy_interface;
|
||||
+#endif
|
||||
union {
|
||||
struct e1000_dev_spec_82575 _82575;
|
||||
} dev_spec;
|
||||
--- a/drivers/net/ethernet/intel/igb/igb_main.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
|
||||
@@ -41,6 +41,7 @@
|
||||
#include <linux/if_vlan.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/pci-aspm.h>
|
||||
+#include <linux/phy.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ip.h>
|
||||
@@ -2231,6 +2232,126 @@ static s32 igb_init_i2c(struct igb_adapt
|
||||
return status;
|
||||
}
|
||||
|
||||
+
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+/*
|
||||
+ * MMIO/PHYdev support
|
||||
+ */
|
||||
+
|
||||
+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
|
||||
+{
|
||||
+ struct e1000_hw *hw = bus->priv;
|
||||
+ u16 out;
|
||||
+ int err;
|
||||
+
|
||||
+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
|
||||
+ if (err)
|
||||
+ return err;
|
||||
+ return out;
|
||||
+}
|
||||
+
|
||||
+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
|
||||
+ u16 val)
|
||||
+{
|
||||
+ struct e1000_hw *hw = bus->priv;
|
||||
+
|
||||
+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
|
||||
+}
|
||||
+
|
||||
+static int igb_enet_mdio_reset(struct mii_bus *bus)
|
||||
+{
|
||||
+ udelay(300);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void igb_enet_mii_link(struct net_device *netdev)
|
||||
+{
|
||||
+}
|
||||
+
|
||||
+/* Probe the mdio bus for phys and connect them */
|
||||
+static int igb_enet_mii_probe(struct net_device *netdev)
|
||||
+{
|
||||
+ struct igb_adapter *adapter = netdev_priv(netdev);
|
||||
+ struct e1000_hw *hw = &adapter->hw;
|
||||
+ struct phy_device *phy_dev = NULL;
|
||||
+ int phy_id;
|
||||
+
|
||||
+ /* check for attached phy */
|
||||
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
|
||||
+ if (hw->mii_bus->phy_map[phy_id]) {
|
||||
+ phy_dev = hw->mii_bus->phy_map[phy_id];
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+ if (!phy_dev) {
|
||||
+ netdev_err(netdev, "no PHY found\n");
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+
|
||||
+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
|
||||
+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
|
||||
+ igb_enet_mii_link, hw->phy_interface);
|
||||
+ if (IS_ERR(phy_dev)) {
|
||||
+ netdev_err(netdev, "could not attach to PHY\n");
|
||||
+ return PTR_ERR(phy_dev);
|
||||
+ }
|
||||
+
|
||||
+ hw->phy_dev = phy_dev;
|
||||
+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
|
||||
+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+/* Create and register mdio bus */
|
||||
+static int igb_enet_mii_init(struct pci_dev *pdev)
|
||||
+{
|
||||
+ struct mii_bus *mii_bus;
|
||||
+ struct net_device *netdev = pci_get_drvdata(pdev);
|
||||
+ struct igb_adapter *adapter = netdev_priv(netdev);
|
||||
+ struct e1000_hw *hw = &adapter->hw;
|
||||
+ int err;
|
||||
+
|
||||
+ mii_bus = mdiobus_alloc();
|
||||
+ if (mii_bus == NULL) {
|
||||
+ err = -ENOMEM;
|
||||
+ goto err_out;
|
||||
+ }
|
||||
+
|
||||
+ mii_bus->name = "igb_enet_mii_bus";
|
||||
+ mii_bus->read = igb_enet_mdio_read;
|
||||
+ mii_bus->write = igb_enet_mdio_write;
|
||||
+ mii_bus->reset = igb_enet_mdio_reset;
|
||||
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
||||
+ pci_name(pdev), hw->device_id + 1);
|
||||
+ mii_bus->priv = hw;
|
||||
+ mii_bus->parent = &pdev->dev;
|
||||
+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
|
||||
+
|
||||
+ err = mdiobus_register(mii_bus);
|
||||
+ if (err) {
|
||||
+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
|
||||
+ goto err_out_free_mdiobus;
|
||||
+ }
|
||||
+ hw->mii_bus = mii_bus;
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_out_free_mdiobus:
|
||||
+ mdiobus_free(mii_bus);
|
||||
+err_out:
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static void igb_enet_mii_remove(struct e1000_hw *hw)
|
||||
+{
|
||||
+ if (hw->mii_bus) {
|
||||
+ mdiobus_unregister(hw->mii_bus);
|
||||
+ mdiobus_free(hw->mii_bus);
|
||||
+ }
|
||||
+}
|
||||
+#endif /* CONFIG_PHYLIB */
|
||||
+
|
||||
/**
|
||||
* igb_probe - Device Initialization Routine
|
||||
* @pdev: PCI device information struct
|
||||
@@ -2653,6 +2774,13 @@ static int igb_probe(struct pci_dev *pde
|
||||
}
|
||||
}
|
||||
pm_runtime_put_noidle(&pdev->dev);
|
||||
+
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ /* create and register the mdio bus if using ext phy */
|
||||
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
||||
+ igb_enet_mii_init(pdev);
|
||||
+#endif
|
||||
+
|
||||
return 0;
|
||||
|
||||
err_register:
|
||||
@@ -2796,6 +2924,10 @@ static void igb_remove(struct pci_dev *p
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
|
||||
pm_runtime_get_noresume(&pdev->dev);
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
||||
+ igb_enet_mii_remove(hw);
|
||||
+#endif
|
||||
#ifdef CONFIG_IGB_HWMON
|
||||
igb_sysfs_exit(adapter);
|
||||
#endif
|
||||
@@ -3101,6 +3233,12 @@ static int __igb_open(struct net_device
|
||||
if (!resuming)
|
||||
pm_runtime_put(&pdev->dev);
|
||||
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ /* Probe and connect to PHY if using ext phy */
|
||||
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
||||
+ igb_enet_mii_probe(netdev);
|
||||
+#endif
|
||||
+
|
||||
/* start the watchdog. */
|
||||
hw->mac.get_link_status = 1;
|
||||
schedule_work(&adapter->watchdog_task);
|
||||
@@ -7097,21 +7235,41 @@ void igb_alloc_rx_buffers(struct igb_rin
|
||||
static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
||||
{
|
||||
struct igb_adapter *adapter = netdev_priv(netdev);
|
||||
+ struct e1000_hw *hw = &adapter->hw;
|
||||
struct mii_ioctl_data *data = if_mii(ifr);
|
||||
|
||||
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
|
||||
+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
|
||||
+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
switch (cmd) {
|
||||
case SIOCGMIIPHY:
|
||||
- data->phy_id = adapter->hw.phy.addr;
|
||||
+ data->phy_id = hw->phy.addr;
|
||||
break;
|
||||
case SIOCGMIIREG:
|
||||
- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
||||
- &data->val_out))
|
||||
- return -EIO;
|
||||
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
|
||||
+ if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
|
||||
+ data->reg_num & 0x1F,
|
||||
+ &data->val_out))
|
||||
+ return -EIO;
|
||||
+ } else {
|
||||
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
||||
+ &data->val_out))
|
||||
+ return -EIO;
|
||||
+ }
|
||||
break;
|
||||
case SIOCSMIIREG:
|
||||
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
|
||||
+ if (igb_write_reg_gs40g(hw, data->phy_id,
|
||||
+ data->reg_num & 0x1F,
|
||||
+ data->val_in))
|
||||
+ return -EIO;
|
||||
+ } else {
|
||||
+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
|
||||
+ data->val_in))
|
||||
+ return -EIO;
|
||||
+ }
|
||||
+ break;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
--- a/drivers/net/phy/Kconfig
|
||||
+++ b/drivers/net/phy/Kconfig
|
||||
@@ -292,6 +292,14 @@ endif # RTL8366_SMI
|
||||
|
||||
source "drivers/net/phy/b53/Kconfig"
|
||||
|
||||
+config GATEWORKS_GW16083
|
||||
+ tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
|
||||
+ ---help---
|
||||
+ The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
|
||||
+ Gateworks Ventana baseboard and provides a 7-port GbE managed
|
||||
+ Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
|
||||
+ ports"
|
||||
+
|
||||
endif # PHYLIB
|
||||
|
||||
config MICREL_KS8995MA
|
||||
--- a/drivers/net/phy/Makefile
|
||||
+++ b/drivers/net/phy/Makefile
|
||||
@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
|
||||
obj-$(CONFIG_DP83640_PHY) += dp83640.o
|
||||
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
||||
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
||||
+obj-$(CONFIG_GATEWORKS_GW16083) += gw16083.o
|
||||
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
||||
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
||||
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
|
||||
@@ -89,6 +89,11 @@
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&fec {
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
|
||||
@@ -266,6 +266,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&pcie {
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||||
@@ -267,6 +267,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&pcie {
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||||
@@ -308,6 +308,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
Loading…
Reference in New Issue