From 6413f40e96cc4ff184d814684c2bf7bc1b3125b9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 8 May 2015 12:23:45 +0000 Subject: [PATCH] ar71xx: fix ethernet on wnr2000-v4 Most people report broken ethernet with upstream. Last year, user "franz.flasch" authored a working mach-file. His patch is outdated so I modernized it. Original patch and user commentary on page 1: https://forum.openwrt.org/viewtopic.php?pid=260861#p260861 I have figured out what the critical differences are between the two that caused upstream ethernet to break. 1) Both ath79_init_mac() functions calls must be invocated before any GMAC init 2) must init GMAC0 before GMAC1 That was enough to get upstream to function, but I wanted to enjoy my confidence having tested franz's patch for a week sucessfully, so I put his whole function in, which only features more differences in order of function calls. An expert should consider these changes, which could pose potential bugs/issues: 1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the ath79_setup_ar934x_eth_cfg() call. 2) Possible consequence of no longer explicitly setting ethernet duplex/speed. Review: With this patch, my ethernet and wireless works. Signed-off-by: Michael J. Bazzinotti SVN-Revision: 45633 --- .../files/arch/mips/ath79/mach-wnr2000-v4.c | 34 +++++++------------ 1 file changed, 12 insertions(+), 22 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c index 36896b7271..df0bf0ed27 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c @@ -122,42 +122,32 @@ static struct gpio_keys_button wnr2000v4_gpio_keys[] __initdata = { static void __init wnr_common_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | - AR934X_ETH_CFG_SW_PHY_SWAP); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ath79_register_mdio(1, 0x0); - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0); + ath79_register_usb(); - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); + ath79_register_m25p80(NULL); - /* WAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0); + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - /* GMAC0 is connected to the PHY0 of the internal switch */ + ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0); + + /* GMAC0 is connected to the PHY0 of the internal switch, GE0 */ ath79_switch_data.phy4_mii_en = 1; ath79_switch_data.phy_poll_mask = BIT(4); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ath79_eth0_data.phy_mask = BIT(4); ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_register_eth(0); - /* WLAN */ - ath79_register_wmac(ee, art+WNR2000V4_MAC0_OFFSET); + /* GMAC1 is connected to the internal switch, GE1 */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); - /* USB */ - ath79_register_usb(); + ath79_register_wmac(ee, art); } static void __init wnr2000v4_setup(void)