ramips: add support for PandoraBox PBR-M1

This patch is for PandoraBox PBR-M1 which is based on mt7621,
all the features work fine, including rtc, leds, button, usb3.0, etc.

Signed-off-by: tymon <banglang.huang@foxmail.com>

SVN-Revision: 46041
owl
John Crispin 2015-06-18 18:20:40 +00:00
parent df1daa4692
commit 640b211b1e
8 changed files with 191 additions and 1 deletions

View File

@ -175,6 +175,11 @@ case $board in
set_wifi_led "7links:orange:wifi"
set_usb_led "7links:blue:storage"
;;
pbr-m1)
ucidef_set_led_netdev "internet" "internet" "pbr-m1:green:internet" "eth0.2"
ucidef_set_led_default "power" "power" "pbr-m1:green:power" "1"
ucidef_set_led_default "sys" "sys" "pbr-m1:green:sys" "1"
;;
sl-r7205)
set_wifi_led "rt2800pci-phy0::radio"
;;

View File

@ -129,6 +129,7 @@ ramips_setup_interfaces()
dir-320-b1 | \
dir-615-h1 | \
firewrt | \
pbr-m1 | \
hlk-rm04 | \
mt7621 | \
mt7628 | \

View File

@ -117,6 +117,9 @@ get_status_led() {
omni-emb-hpm)
status_led="emb:green:status"
;;
pbr-m1)
status_led="pbr-m1:green:sys"
;;
psr-680w)
status_led="psr-680w:red:wan"
;;

View File

@ -247,6 +247,9 @@ ramips_board_detect() {
*"OLinuXino-RT5350F-EVB")
name="olinuxino-rt5350f-evb"
;;
*"PBR-M1")
name="pbr-m1"
;;
*"Petatel PSR-680W"*)
name="psr-680w"
;;

View File

@ -53,6 +53,7 @@ platform_check_image() {
fonera20n | \
freestation5 | \
firewrt |\
pbr-m1 |\
hg255d | \
hlk-rm04 | \
ht-tm02 | \

View File

@ -0,0 +1,150 @@
/dts-v1/;
/include/ "mt7621.dtsi"
/ {
compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
model = "PBR-M1";
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
sdhci@10130000 {
status = "okay";
};
palmbus@1E000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q256";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
i2c@900 {
compatible = "ralink,i2c-mt7621";
reg = <0x900 0x100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
status = "okay";
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};
pcie@1e140000 {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
mediatek,2ghz = <0>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,5ghz = <0>;
};
};
};
ethernet@1e100000 {
mtd-mac-address = <&factory 0xe000>;
};
gpio-leds {
compatible = "gpio-leds";
buzzer {
label = "pbr-m1:buzzer";
gpios = <&gpio0 27 1>;
};
power {
label = "pbr-m1:green:power";
gpios = <&gpio0 25 1>;
};
sys {
label = "pbr-m1:green:sys";
gpios = <&gpio0 24 1>;
};
internet {
label = "pbr-m1:green:internet";
gpios = <&gpio0 23 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 1>;
linux,code = <0x198>;
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
ralink,function = "gpio";
};
};
};
};

View File

@ -919,7 +919,7 @@ endif
#
ifeq ($(SUBTARGET),mt7621)
TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1
endif
define Device/mt7621
@ -956,6 +956,11 @@ define Device/firewrt
IMAGE_SIZE := $(ralink_default_fw_size_16M)
endef
define Device/pbr-m1
DTS := PBR-M1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
endef
#
# MT7628 Profiles
#

View File

@ -0,0 +1,22 @@
#
# Copyright (C) 2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/PBR-M1
NAME:=PBR-M1 Device
PACKAGES:=\
kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \
kmod-ledtrig-usbdev kmod-mt76 kmod-ata-core kmod-ata-ahci \
kmod-usb3-mt7621 kmod-rtc-pcf8563
endef
FEATURES+=rtc
define Profile/PBR-M1/Description
Default package set compatible with most boards.
endef
$(eval $(call Profile,PBR-M1))