mirror of https://github.com/hak5/openwrt-owl.git
ramips: add support for TP-Link Archer C20 v4
TP-Link Archer C20 v4 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 5x 10/100 Mbps Ethernet - 3x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power input switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. * MT7610EN ac chip isn't not supported by LEDE. Therefore 5Ghz won't work. Flash instruction: The only way to flash LEDE image in ArcherC20v4 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC20v4-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>owl
Maxim Anisimov
Mathias Kresin
parent
ff1e895530
commit
5bdd238b63
|
|
@ -388,6 +388,11 @@ tplink,c20-v1)
|
|||
set_usb_led "$boardname:blue:usb"
|
||||
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
|
||||
;;
|
||||
tplink,c20-v4)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
|
||||
;;
|
||||
tplink,tl-mr3420-v5)
|
||||
set_usb_led "$boardname:green:usb"
|
||||
set_wifi_led "$boardname:green:wlan"
|
||||
|
|
|
|||
|
|
@ -173,6 +173,7 @@ ramips_setup_interfaces()
|
|||
mzk-wdpr|\
|
||||
rb750gr3|\
|
||||
rt-n14u|\
|
||||
tplink,c20-v4|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ get_status_led() {
|
|||
nbg-419n2|\
|
||||
pwh2004|\
|
||||
r6220|\
|
||||
tplink,c20-v4|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
|
|
|
|||
|
|
@ -241,6 +241,7 @@ platform_check_image() {
|
|||
c50|\
|
||||
mr200|\
|
||||
tplink,c20-v1|\
|
||||
tplink,c20-v4|\
|
||||
tplink,tl-mr3420-v5|\
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,170 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
|
||||
model = "TP-Link Archer C20 v4";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "c20-v4:green:lan";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "c20-v4:green:power";
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "c20-v4:green:wan";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
label = "c20-v4:orange:wan";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "c20-v4:green:wlan5g";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "c20-v4:green:wlan2g";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "c20-v4:green:wps";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x20000 0x7a0000>;
|
||||
};
|
||||
|
||||
partition@7c0000 {
|
||||
label = "config";
|
||||
reg = <0x7c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
rom: partition@7d0000 {
|
||||
label = "rom";
|
||||
reg = <0x7d0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "romfile";
|
||||
reg = <0x7e0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
radio: partition@7f0000 {
|
||||
label = "radio";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mediatek,mtd-eeprom = <&radio 0x0>;
|
||||
mtd-mac-address = <&rom 0xf100>;
|
||||
mtd-mac-address-increment = <(-2)>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&rom 0xf100>;
|
||||
mediatek,portmap = "wllll";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
pcie-bridge {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
mediatek,mtd-eeprom = <&radio 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
mtd-mac-address = <&rom 0xf100>;
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -139,6 +139,19 @@ define Device/tl-wr841n-v13
|
|||
endef
|
||||
TARGET_DEVICES += tl-wr841n-v13
|
||||
|
||||
define Device/tplink_c20-v4
|
||||
$(Device/tplink)
|
||||
DTS := ArcherC20v4
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_TITLE := TP-Link ArcherC20 v4
|
||||
TPLINK_FLASHLAYOUT := 8Mmtk
|
||||
TPLINK_HWID := 0xc200004
|
||||
TPLINK_HWREV := 0x1
|
||||
TPLINK_HWREVADD := 0x4
|
||||
TPLINK_HVERSION := 3
|
||||
endef
|
||||
TARGET_DEVICES += tplink_c20-v4
|
||||
|
||||
define Device/tplink_tl-mr3420-v5
|
||||
$(Device/tplink)
|
||||
DTS := TL-MR3420V5
|
||||
|
|
|
|||
Loading…
Reference in New Issue