mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: add support for 8devices Lima board
Lima is a module for the (IoE) internet of everything applications, based on Qualcomm/Atheros QCA4531. Specification: - 650/600/216 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 32 MB of FLASH - 2T2R 2.4 GHz - 2x 10/100 Mbps Ethernet - USB 2.0 Host - PCIe - UART for serial console - 14x GPIO Flash instruction: 1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin and rename it to 8dev_recovery.bin 2. Binary file copy to USB stick and plug into slot USB 3. Press S2 (reset) button 4. Press and hold the S1 button by 5 seconds 5. Wait ~40 seconds to complete recovery Tested on: - Lima development kit Signed-off-by: Karol Dudek <karoiz@sli.pl>owl
Karol Dudek
John Crispin
parent
a4efc9965c
commit
58fc50f1b0
|
|
@ -1262,6 +1262,9 @@ ar71xx_board_detect() {
|
|||
"8devices Carambola2"*)
|
||||
name="carambola2"
|
||||
;;
|
||||
"8devices Lima"*)
|
||||
name="lima"
|
||||
;;
|
||||
*"Sitecom WLR-8100")
|
||||
name="wlr8100"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -247,6 +247,7 @@ platform_check_image() {
|
|||
hiwifi-hc6361|\
|
||||
hornet-ub-x2|\
|
||||
jwap230|\
|
||||
lima|\
|
||||
loco-m-xw|\
|
||||
mzk-w04nu|\
|
||||
mzk-w300nh|\
|
||||
|
|
|
|||
|
|
@ -116,6 +116,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y
|
|||
CONFIG_ATH79_MACH_JA76PF=y
|
||||
CONFIG_ATH79_MACH_JWAP003=y
|
||||
CONFIG_ATH79_MACH_JWAP230=y
|
||||
CONFIG_ATH79_MACH_LIMA=y
|
||||
CONFIG_ATH79_MACH_MC_MAC1200R=y
|
||||
CONFIG_ATH79_MACH_MR12=y
|
||||
CONFIG_ATH79_MACH_MR16=y
|
||||
|
|
|
|||
|
|
@ -1822,6 +1822,17 @@ config ATH79_MACH_CARAMBOLA2
|
|||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_LIMA
|
||||
bool "8devices Lima board"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_SPI
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_ETH
|
||||
|
||||
config ATH79_MACH_CF_E316N_V2
|
||||
bool "COMFAST CF-E316N v2 support"
|
||||
select SOC_AR934X
|
||||
|
|
|
|||
|
|
@ -120,6 +120,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
|
|||
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
|
||||
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
|
||||
obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
|
||||
obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o
|
||||
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
|
||||
obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
|
||||
obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,88 @@
|
|||
/*
|
||||
* 8devices Lima board support
|
||||
*
|
||||
* Copyright (C) 2016 Mantas Pucka <mantas@8devices.com>
|
||||
* Copyright (C) 2017 Karol Dudek <karoiz@sli.pl>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
|
||||
#define LIMA_GPIO_BTN_1_DEFAULT 16
|
||||
#define LIMA_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define LIMA_KEYS_DEBOUNCE_INTERVAL (3 * LIMA_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define LIMA_ETH_PHYS (BIT(0) | BIT(1))
|
||||
|
||||
#define LIMA_MAC0_OFFSET 0x0000
|
||||
#define LIMA_MAC1_OFFSET 0x0006
|
||||
|
||||
#define LIMA_CALDATA_OFFSET 0x1000
|
||||
#define LIMA_WMAC_MAC_OFFSET 0x0800
|
||||
|
||||
static struct gpio_keys_button lima_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "button1",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_1,
|
||||
.debounce_interval = LIMA_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = LIMA_GPIO_BTN_1_DEFAULT,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init lima_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1f080000);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, LIMA_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(lima_gpio_keys),
|
||||
lima_gpio_keys);
|
||||
|
||||
ath79_setup_ar933x_phy4_switch(true, true);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art + LIMA_MAC0_OFFSET, 0);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, art + LIMA_MAC1_OFFSET, 0);
|
||||
|
||||
ath79_register_mdio(0, ~LIMA_ETH_PHYS);
|
||||
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
|
||||
ath79_switch_data.phy_poll_mask |= BIT(0);
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_data.phy_mask = BIT(1);
|
||||
ath79_register_eth(1);
|
||||
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_register_wmac(art + LIMA_CALDATA_OFFSET,
|
||||
art + LIMA_WMAC_MAC_OFFSET);
|
||||
ath79_register_usb();
|
||||
ath79_register_pci();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_LIMA, "LIMA", "8devices Lima board", lima_setup);
|
||||
|
|
@ -113,6 +113,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
|
||||
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
|
||||
ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
|
||||
ATH79_MACH_LIMA, /* 8devices Lima */
|
||||
ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */
|
||||
ATH79_MACH_MR12, /* Cisco Meraki MR12 */
|
||||
ATH79_MACH_MR16, /* Cisco Meraki MR16 */
|
||||
|
|
|
|||
|
|
@ -161,6 +161,15 @@ define Device/gl-mifi
|
|||
endef
|
||||
TARGET_DEVICES += gl-mifi
|
||||
|
||||
define Device/lima
|
||||
DEVICE_TITLE := Lima board from 8Devices
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
||||
BOARDNAME = LIMA
|
||||
IMAGE_SIZE = 15616k
|
||||
MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
|
||||
endef
|
||||
TARGET_DEVICES += lima
|
||||
|
||||
define Device/mr12
|
||||
DEVICE_TITLE := Meraki MR12
|
||||
DEVICE_PACKAGES := kmod-spi-gpio
|
||||
|
|
|
|||
|
|
@ -81,6 +81,7 @@
|
|||
# CONFIG_ATH79_MACH_JA76PF is not set
|
||||
# CONFIG_ATH79_MACH_JWAP003 is not set
|
||||
# CONFIG_ATH79_MACH_JWAP230 is not set
|
||||
# CONFIG_ATH79_MACH_LIMA is not set
|
||||
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
|
||||
# CONFIG_ATH79_MACH_MR12 is not set
|
||||
# CONFIG_ATH79_MACH_MR16 is not set
|
||||
|
|
|
|||
|
|
@ -79,6 +79,7 @@
|
|||
# CONFIG_ATH79_MACH_JA76PF is not set
|
||||
# CONFIG_ATH79_MACH_JWAP003 is not set
|
||||
# CONFIG_ATH79_MACH_JWAP230 is not set
|
||||
# CONFIG_ATH79_MACH_LIMA is not set
|
||||
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
|
||||
# CONFIG_ATH79_MACH_MR12 is not set
|
||||
# CONFIG_ATH79_MACH_MR16 is not set
|
||||
|
|
|
|||
Loading…
Reference in New Issue