mirror of https://github.com/hak5/openwrt-owl.git
ramips: add support for Netgear R6120
This patch adds support for the Netgear R6120, aka Netgear AC1200. Specification: - SoC: MediaTek MT7628 (580 MHz) - Flash: 16 MiB - RAM: 64 MiB - Wireless: 2.4Ghz(builtin) and 5Ghz (MT7612E) - LAN speed: 10/100 - LAN ports: 4 - WAN speed: 10/100 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 To flash use nmrpflash with the provided factory.img. Flashing via webinterface will not work, for now. Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>master
Ludwig Thomeczek
Mathias Kresin
parent
e5b802b9c2
commit
5543d63fc8
|
|
@ -319,6 +319,11 @@ mzk-ex750np)
|
|||
na930)
|
||||
set_usb_led "$boardname:blue:status"
|
||||
;;
|
||||
netgear,r6120)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
|
||||
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "phy1tpt"
|
||||
;;
|
||||
newifi-d1)
|
||||
set_usb_led "$boardname:red:status"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -103,6 +103,7 @@ ramips_setup_interfaces()
|
|||
mzk-750dhp|\
|
||||
mzk-w300nh2|\
|
||||
d-team,newifi-d2|\
|
||||
netgear,r6120|\
|
||||
nixcore-x1-8M|\
|
||||
nixcore-x1-16M|\
|
||||
oy-0001|\
|
||||
|
|
|
|||
|
|
@ -132,6 +132,7 @@ platform_check_image() {
|
|||
psr-680w|\
|
||||
px-4885-4M|\
|
||||
px-4885-8M|\
|
||||
netgear,r6120|\
|
||||
rb750gr3|\
|
||||
re6500|\
|
||||
rp-n53|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,145 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "netgear,r6120", "mediatek,mt7628an-soc";
|
||||
model = "Netgear AC1200 R6120";
|
||||
|
||||
aliases {
|
||||
led-status = &led_power;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "r6120:green:lan";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
label = "r6120:green:power";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "r6120:green:wlan2g";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan_orange {
|
||||
label = "r6120:orange:wlan2g";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5 {
|
||||
label = "r6120:green:wlan5g";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5_orange {
|
||||
label = "r6120:orange:wlan5g";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "p0led_an", "p1led_an", "p2led_an",
|
||||
"p3led_an", "p4led_an", "wdt", "wled_an";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
nvram: partition@60000 {
|
||||
label = "nvram";
|
||||
reg = <0x60000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@90000 {
|
||||
label = "firmware";
|
||||
reg = <0x90000 0xf60000>;
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "reserved";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&nvram 0x100b0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x20000>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&nvram 0x100b0>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x28000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
mtd-mac-address = <&nvram 0x100b0>;
|
||||
mtd-mac-address-increment = <(2)>;
|
||||
};
|
||||
};
|
||||
|
|
@ -2,6 +2,17 @@
|
|||
# MT76x8 Profiles
|
||||
#
|
||||
|
||||
DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
|
||||
|
||||
define Build/mksercommfw
|
||||
$(STAGING_DIR_HOST)/bin/mksercommfw \
|
||||
$@ \
|
||||
$(SERCOMM_KERNEL_OFFSET) \
|
||||
$(SERCOMM_HWID) \
|
||||
$(SERCOMM_HWVER) \
|
||||
$(SERCOMM_SWVER)
|
||||
endef
|
||||
|
||||
define Device/tplink
|
||||
TPLINK_FLASHLAYOUT :=
|
||||
TPLINK_HWID :=
|
||||
|
|
@ -91,6 +102,23 @@ define Device/mt7628
|
|||
endef
|
||||
TARGET_DEVICES += mt7628
|
||||
|
||||
define Device/netgear_r6120
|
||||
DTS := R6120
|
||||
BLOCKSIZE := 64k
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
DEVICE_TITLE := Netgear AC1200 R6120
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
||||
SERCOMM_KERNEL_OFFSET := 90000
|
||||
SERCOMM_HWID := CGQ
|
||||
SERCOMM_HWVER := A001
|
||||
SERCOMM_SWVER := 0040
|
||||
IMAGES += factory.img
|
||||
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
|
||||
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/factory.img := $$(IMAGE/default) | mksercommfw
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r6120
|
||||
|
||||
define Device/omega2
|
||||
DTS := OMEGA2
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
|
|
|
|||
Loading…
Reference in New Issue