mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards
It is only on RB911G-5HPnD and RB912UAG-5HPnD boards. The LEDs and the USB port is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39102owl
Gabor Juhos
parent
eda27e8382
commit
5237a50089
|
|
@ -64,6 +64,7 @@ CONFIG_ATH79_MACH_PB92=y
|
|||
# CONFIG_ATH79_MACH_RB2011 is not set
|
||||
# CONFIG_ATH79_MACH_RB4XX is not set
|
||||
# CONFIG_ATH79_MACH_RB750 is not set
|
||||
# CONFIG_ATH79_MACH_RB91X is not set
|
||||
# CONFIG_ATH79_MACH_RB95X is not set
|
||||
CONFIG_ATH79_MACH_RW2458N=y
|
||||
CONFIG_ATH79_MACH_TEW_632BRP=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,176 @@
|
|||
/*
|
||||
* MikroTik RouterBOARD 91X support
|
||||
*
|
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#define pr_fmt(fmt) "rb91x: " fmt
|
||||
|
||||
#include <linux/phy.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/74x164.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#include <linux/routerboot.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <asm/prom.h>
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
#include <asm/mach-ath79/ath79_spi_platform.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
#include "routerboot.h"
|
||||
|
||||
#define RB_ROUTERBOOT_OFFSET 0x0000
|
||||
#define RB_ROUTERBOOT_MIN_SIZE 0xb000
|
||||
#define RB_HARD_CFG_SIZE 0x1000
|
||||
#define RB_BIOS_OFFSET 0xd000
|
||||
#define RB_BIOS_SIZE 0x1000
|
||||
#define RB_SOFT_CFG_OFFSET 0xf000
|
||||
#define RB_SOFT_CFG_SIZE 0x1000
|
||||
|
||||
#define RB91X_FLAG_USB BIT(0)
|
||||
#define RB91X_FLAG_PCIE BIT(1)
|
||||
|
||||
struct rb_board_info {
|
||||
const char *name;
|
||||
u32 flags;
|
||||
};
|
||||
|
||||
static struct mtd_partition rb711gr100_spi_partitions[] = {
|
||||
{
|
||||
.name = "routerboot",
|
||||
.offset = RB_ROUTERBOOT_OFFSET,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "hard_config",
|
||||
.size = RB_HARD_CFG_SIZE,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "bios",
|
||||
.offset = RB_BIOS_OFFSET,
|
||||
.size = RB_BIOS_SIZE,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "soft_config",
|
||||
.size = RB_SOFT_CFG_SIZE,
|
||||
}
|
||||
};
|
||||
|
||||
static struct flash_platform_data rb711gr100_spi_flash_data = {
|
||||
.parts = rb711gr100_spi_partitions,
|
||||
.nr_parts = ARRAY_SIZE(rb711gr100_spi_partitions),
|
||||
};
|
||||
|
||||
static void __init rb711gr100_init_partitions(const struct rb_info *info)
|
||||
{
|
||||
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
|
||||
rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs;
|
||||
|
||||
rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs;
|
||||
}
|
||||
|
||||
void __init rb711gr100_wlan_init(void)
|
||||
{
|
||||
char *caldata;
|
||||
u8 wlan_mac[ETH_ALEN];
|
||||
|
||||
caldata = rb_get_wlan_data();
|
||||
if (caldata == NULL)
|
||||
return;
|
||||
|
||||
ath79_init_mac(wlan_mac, ath79_mac_base, 1);
|
||||
ath79_register_wmac(caldata + 0x1000, wlan_mac);
|
||||
|
||||
kfree(caldata);
|
||||
}
|
||||
|
||||
#define RB_BOARD_INFO(_name, _flags) \
|
||||
{ \
|
||||
.name = (_name), \
|
||||
.flags = (_flags), \
|
||||
}
|
||||
|
||||
static const struct rb_board_info rb711gr100_boards[] __initconst = {
|
||||
RB_BOARD_INFO("911G-2HPnD", 0),
|
||||
RB_BOARD_INFO("911G-5HPnD", 0),
|
||||
RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
|
||||
RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
|
||||
};
|
||||
|
||||
static u32 rb711gr100_get_flags(const struct rb_info *info)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) {
|
||||
const struct rb_board_info *bi;
|
||||
|
||||
bi = &rb711gr100_boards[i];
|
||||
if (strcmp(info->board_name, bi->name) == 0)
|
||||
return bi->flags;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __init rb711gr100_setup(void)
|
||||
{
|
||||
const struct rb_info *info;
|
||||
char buf[64];
|
||||
u32 flags;
|
||||
|
||||
info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
|
||||
if (!info)
|
||||
return;
|
||||
|
||||
scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
|
||||
(info->board_name) ? info->board_name : "");
|
||||
mips_set_machine_name(buf);
|
||||
|
||||
rb711gr100_init_partitions(info);
|
||||
ath79_register_m25p80(&rb711gr100_spi_flash_data);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
||||
AR934X_ETH_CFG_SW_ONLY_MODE);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
rb711gr100_wlan_init();
|
||||
|
||||
platform_device_register_simple("rb91x-nand", -1, NULL, 0);
|
||||
|
||||
flags = rb711gr100_get_flags(info);
|
||||
|
||||
if (flags & RB91X_FLAG_USB)
|
||||
ath79_register_usb();
|
||||
|
||||
if (flags & RB91X_FLAG_PCIE)
|
||||
ath79_register_pci();
|
||||
|
||||
}
|
||||
|
||||
MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup);
|
||||
|
|
@ -37,6 +37,7 @@
|
|||
CONFIG_ATH79_MACH_RB2011=y
|
||||
CONFIG_ATH79_MACH_RB4XX=y
|
||||
CONFIG_ATH79_MACH_RB750=y
|
||||
CONFIG_ATH79_MACH_RB91X=y
|
||||
CONFIG_ATH79_MACH_RB95X=y
|
||||
# CONFIG_ATH79_MACH_RW2458N is not set
|
||||
# CONFIG_ATH79_MACH_TEW_632BRP is not set
|
||||
|
|
@ -98,6 +99,7 @@ CONFIG_MTD_NAND_AR934X=y
|
|||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_RB4XX=y
|
||||
CONFIG_MTD_NAND_RB750=y
|
||||
CONFIG_MTD_NAND_RB91X=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
# CONFIG_MTD_TPLINK_PARTS is not set
|
||||
|
|
|
|||
|
|
@ -0,0 +1,39 @@
|
|||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -75,6 +75,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
|
||||
ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
|
||||
ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
|
||||
+ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */
|
||||
ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
|
||||
ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
|
||||
ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -391,6 +391,16 @@ config ATH79_MACH_RB750
|
||||
select ATH79_ROUTERBOOT
|
||||
select RLE_DECOMPRESS
|
||||
|
||||
+config ATH79_MACH_RB91X
|
||||
+ bool "MikroTik RouterBOARD 91X support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_ROUTERBOOT
|
||||
+ select RLE_DECOMPRESS
|
||||
+
|
||||
config ATH79_MACH_RB95X
|
||||
bool "MikroTik RouterBOARD 95X support"
|
||||
select SOC_AR934X
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_PB44) += mach-p
|
||||
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
|
||||
+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
|
||||
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
|
||||
Loading…
Reference in New Issue