From 4e8b080d9f7819ee9bb77cdb8215462acc1759f9 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 25 Jan 2009 21:04:15 +0000 Subject: [PATCH] preliminary support for 2.6.28 (based on the patches by Alexandros C. Couloumbis) SVN-Revision: 14189 --- target/linux/adm5120/Makefile | 4 +- .../include/asm/mach-adm5120/adm5120_defs.h | 53 +++ .../include/asm/mach-adm5120/adm5120_info.h | 127 ++++++ .../include/asm/mach-adm5120/adm5120_intc.h | 63 +++ .../include/asm/mach-adm5120/adm5120_mpmc.h | 92 +++++ .../include/asm/mach-adm5120/adm5120_nand.h | 89 +++++ .../asm/mach-adm5120/adm5120_platform.h | 87 ++++ .../include/asm/mach-adm5120/adm5120_switch.h | 300 ++++++++++++++ .../include/asm/mach-adm5120/adm5120_uart.h | 64 +++ .../mips/include/asm/mach-adm5120/asm/sizes.h | 56 +++ .../asm/mach-adm5120/cpu-feature-overrides.h | 71 ++++ .../arch/mips/include/asm/mach-adm5120/gpio.h | 115 ++++++ .../arch/mips/include/asm/mach-adm5120/irq.h | 43 ++ .../include/asm/mach-adm5120/prom/admboot.h | 17 + .../mips/include/asm/mach-adm5120/prom/cfe.h | 18 + .../include/asm/mach-adm5120/prom/generic.h | 18 + .../include/asm/mach-adm5120/prom/myloader.h | 179 +++++++++ .../asm/mach-adm5120/prom/routerboot.h | 125 ++++++ .../include/asm/mach-adm5120/prom/zynos.h | 86 ++++ .../arch/mips/include/asm/mach-adm5120/war.h | 25 ++ .../adm5120/patches-2.6.28/001-adm5120.patch | 56 +++ .../patches-2.6.28/002-adm5120_flash.patch | 22 + .../patches-2.6.28/003-adm5120_switch.patch | 23 ++ .../patches-2.6.28/005-adm5120_usb.patch | 33 ++ .../patches-2.6.28/007-adm5120_pci.patch | 19 + .../009-adm5120_leds_switch_trigger.patch | 22 + .../101-cfi_fixup_macronix_bootloc.patch | 91 +++++ .../102-jedec_pmc_39lvxxx_chips.patch | 68 ++++ .../patches-2.6.28/103-mtd_trxsplit.patch | 24 ++ .../patches-2.6.28/120-rb153_cf_driver.patch | 28 ++ .../patches-2.6.28/140-cmdline_hack.patch | 15 + .../patches-2.6.28/200-amba_pl010_hacks.patch | 378 ++++++++++++++++++ .../patches-2.6.28/201-amba_bus_hacks.patch | 13 + .../202-pci_disable_common_quirks.patch | 43 ++ .../203-gpio_leds_brightness.patch | 27 ++ .../patches-2.6.28/310-adm5120_wdt.patch | 31 ++ ..._automatically_enable_rhsc_interrupt.patch | 69 ++++ .../801-mtd_trxsplit_2.6.28_fix.patch | 11 + target/linux/adm5120/router_be/config-2.6.28 | 315 +++++++++++++++ target/linux/adm5120/router_le/config-2.6.28 | 373 +++++++++++++++++ 40 files changed, 3291 insertions(+), 2 deletions(-) create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_defs.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_info.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_intc.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_nand.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_platform.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_switch.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_uart.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/asm/sizes.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/gpio.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/irq.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h create mode 100644 target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/war.h create mode 100644 target/linux/adm5120/patches-2.6.28/001-adm5120.patch create mode 100644 target/linux/adm5120/patches-2.6.28/002-adm5120_flash.patch create mode 100644 target/linux/adm5120/patches-2.6.28/003-adm5120_switch.patch create mode 100644 target/linux/adm5120/patches-2.6.28/005-adm5120_usb.patch create mode 100644 target/linux/adm5120/patches-2.6.28/007-adm5120_pci.patch create mode 100644 target/linux/adm5120/patches-2.6.28/009-adm5120_leds_switch_trigger.patch create mode 100644 target/linux/adm5120/patches-2.6.28/101-cfi_fixup_macronix_bootloc.patch create mode 100644 target/linux/adm5120/patches-2.6.28/102-jedec_pmc_39lvxxx_chips.patch create mode 100644 target/linux/adm5120/patches-2.6.28/103-mtd_trxsplit.patch create mode 100644 target/linux/adm5120/patches-2.6.28/120-rb153_cf_driver.patch create mode 100644 target/linux/adm5120/patches-2.6.28/140-cmdline_hack.patch create mode 100644 target/linux/adm5120/patches-2.6.28/200-amba_pl010_hacks.patch create mode 100644 target/linux/adm5120/patches-2.6.28/201-amba_bus_hacks.patch create mode 100644 target/linux/adm5120/patches-2.6.28/202-pci_disable_common_quirks.patch create mode 100644 target/linux/adm5120/patches-2.6.28/203-gpio_leds_brightness.patch create mode 100644 target/linux/adm5120/patches-2.6.28/310-adm5120_wdt.patch create mode 100644 target/linux/adm5120/patches-2.6.28/800-usb_automatically_enable_rhsc_interrupt.patch create mode 100644 target/linux/adm5120/patches-2.6.28/801-mtd_trxsplit_2.6.28_fix.patch create mode 100644 target/linux/adm5120/router_be/config-2.6.28 create mode 100644 target/linux/adm5120/router_le/config-2.6.28 diff --git a/target/linux/adm5120/Makefile b/target/linux/adm5120/Makefile index 914a5d774a..90ea26ecf7 100644 --- a/target/linux/adm5120/Makefile +++ b/target/linux/adm5120/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2007-2008 OpenWrt.org +# Copyright (C) 2007-2009 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk BOARD:=adm5120 BOARDNAME:=Infineon/ADMtek ADM5120 -LINUX_VERSION:=2.6.27.13 +LINUX_VERSION:=2.6.28 SUBTARGETS:=router_le router_be INITRAMFS_EXTRA_FILES:= diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_defs.h new file mode 100644 index 0000000000..bf220ff4d6 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_defs.h @@ -0,0 +1,53 @@ +/* + * ADM5120 SoC definitions + * + * This file defines some constants specific to the ADM5120 SoC + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H +#define _ASM_MIPS_MACH_ADM5120_DEFS_H + +#define ADM5120_SDRAM0_BASE 0x00000000 +#define ADM5120_SDRAM1_BASE 0x01000000 +#define ADM5120_SRAM1_BASE 0x10000000 +#define ADM5120_EXTIO0_BASE 0x10C00000 +#define ADM5120_EXTIO0_SIZE 0x00200000 +#define ADM5120_EXTIO1_BASE 0x10E00000 +#define ADM5120_EXTIO1_SIZE 0x00200000 +#define ADM5120_MPMC_BASE 0x11000000 +#define ADM5120_MPMC_SIZE 0x00200000 +#define ADM5120_USBC_BASE 0x11200000 +#define ADM5120_USBC_SIZE 0x00200000 +#define ADM5120_PCIMEM_BASE 0x11400000 +#define ADM5120_PCIMEM_SIZE 0x00100000 +#define ADM5120_PCIIO_BASE 0x11500000 +#define ADM5120_PCIIO_SIZE 0x000FFFF0 +#define ADM5120_PCICFG_ADDR 0x115FFFF0 +#define ADM5120_PCICFG_DATA 0x115FFFF8 +#define ADM5120_PCICFG_SIZE 0x00000010 +#define ADM5120_SWITCH_BASE 0x12000000 +#define ADM5120_SWITCH_SIZE 0x00200000 +#define ADM5120_INTC_BASE 0x12200000 +#define ADM5120_INTC_SIZE 0x00200000 +#define ADM5120_UART0_BASE 0x12600000 +#define ADM5120_UART1_BASE 0x12800000 +#define ADM5120_UART_SIZE 0x00200000 +#define ADM5120_SRAM0_BASE 0x1FC00000 + +#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE +#define ADM5120_NAND_SIZE 0xB + +#define ADM5120_CLK_175 175000000 +#define ADM5120_CLK_200 200000000 +#define ADM5120_CLK_225 225000000 +#define ADM5120_CLK_250 250000000 + +#define ADM5120_UART_CLOCK 62500000 + +#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_info.h new file mode 100644 index 0000000000..d90d9d10d8 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_info.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INFO_H +#define _MACH_ADM5120_INFO_H + +#include + +extern unsigned int adm5120_prom_type; +#define ADM5120_PROM_GENERIC 0 +#define ADM5120_PROM_CFE 1 +#define ADM5120_PROM_MYLOADER 2 +#define ADM5120_PROM_ROUTERBOOT 3 +#define ADM5120_PROM_BOOTBASE 4 +#define ADM5120_PROM_UBOOT 5 +#define ADM5120_PROM_LAST 5 + +extern unsigned int adm5120_product_code; +extern unsigned int adm5120_revision; +extern unsigned int adm5120_nand_boot; + +extern unsigned long adm5120_speed; +#define ADM5120_SPEED_175 175000000 +#define ADM5120_SPEED_200 200000000 +#define ADM5120_SPEED_225 225000000 +#define ADM5120_SPEED_250 250000000 + +extern unsigned int adm5120_package; +#define ADM5120_PACKAGE_PQFP 0 +#define ADM5120_PACKAGE_BGA 1 + +extern unsigned long adm5120_memsize; + +extern unsigned long adm5120_mach_type; + +#define MACH_ADM5120_GENERIC 0 /* Generic board */ +#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ +#define MACH_ADM5120_WP54 2 /* Compex WP54G/WP54AG/WPP54G/WPP54AG */ +#define MACH_ADM5120_NP28G 3 /* Compex NP28G */ +#define MACH_ADM5120_NP28GHS 4 /* Compex NP28G HotSpot */ +#define MACH_ADM5120_NP27G 5 /* Compex NP27G */ +#define MACH_ADM5120_WP54Gv1C 6 /* Compex WP54G version 1C */ +#define MACH_ADM5120_RB_11X 7 /* Mikrotik RouterBOARD 111/112 */ +#define MACH_ADM5120_RB_133 8 /* Mikrotik RouterBOARD 133 */ +#define MACH_ADM5120_RB_133C 9 /* Mikrotik RouterBOARD 133c */ +#define MACH_ADM5120_RB_150 10 /* Mikrotik RouterBOARD 150 */ +#define MACH_ADM5120_RB_153 11 /* Mikrotik RouterBOARD 153 */ +#define MACH_ADM5120_RB_192 12 /* Mikrotik RouterBOARD 192 */ +#define MACH_ADM5120_HS100 13 /* ZyXEL HomeSafe 100/100W */ +#define MACH_ADM5120_P334U 14 /* ZyXEL Prestige 334U */ +#define MACH_ADM5120_P334W 15 /* ZyXEL Prestige 334W */ +#define MACH_ADM5120_P334WH 16 /* ZyXEL Prestige 334WH */ +#define MACH_ADM5120_P334WHD 17 /* ZyXEL Prestige 334WHD */ +#define MACH_ADM5120_P334WT 18 /* ZyXEL Prestige 334WT */ +#define MACH_ADM5120_P335 19 /* ZyXEL Prestige 335/335WT */ +#define MACH_ADM5120_P335PLUS 20 /* ZyXEL Prestige 335Plus */ +#define MACH_ADM5120_P335U 21 /* ZyXEL Prestige 335U */ +#define MACH_ADM5120_ES2108 22 /* ZyXEL Ethernet Switch 2108 */ +#define MACH_ADM5120_ES2108F 23 /* ZyXEL Ethernet Switch 2108-F */ +#define MACH_ADM5120_ES2108G 24 /* ZyXEL Ethernet Switch 2108-G */ +#define MACH_ADM5120_ES2108LC 25 /* ZyXEL Ethernet Switch 2108-LC */ +#define MACH_ADM5120_ES2108PWR 26 /* ZyXEL Ethernet Switch 2108-PWR */ +#define MACH_ADM5120_ES2024A 27 /* ZyXEL Ethernet Switch 2024A */ +#define MACH_ADM5120_ES2024PWR 28 /* ZyXEL Ethernet Switch 2024PWR */ +#define MACH_ADM5120_CAS630 29 /* Cellvision CAS-630/630W */ +#define MACH_ADM5120_CAS670 30 /* Cellvision CAS-670/670W */ +#define MACH_ADM5120_CAS700 31 /* Cellvision CAS-700/700W */ +#define MACH_ADM5120_CAS771 32 /* Cellvision CAS-771/771W */ +#define MACH_ADM5120_CAS790 33 /* Cellvision CAS-790 */ +#define MACH_ADM5120_CAS861 34 /* Cellvision CAS-861/861W */ +#define MACH_ADM5120_NFS101U 35 /* Cellvision NFS-101U/101WU */ +#define MACH_ADM5120_NFS202U 36 /* Cellvision NFS-202U/202WU */ +#define MACH_ADM5120_EASY5120PATA 37 /* Infineon EASY 5120P-ATA */ +#define MACH_ADM5120_EASY5120RT 38 /* Infineon EASY 5120-RT */ +#define MACH_ADM5120_EASY5120WVOIP 39 /* Infineon EASY 5120-WVoIP */ +#define MACH_ADM5120_EASY83000 40 /* Infineon EASY-83000 */ +#define MACH_ADM5120_BR6104K 41 /* Edimax BR-6104K */ +#define MACH_ADM5120_BR6104KP 42 /* Edimax BR-6104KP */ +#define MACH_ADM5120_BR61X4WG 43 /* Edimax BR-6104Wg/BR-6114WG */ +#define MACH_ADM5120_PMUGW 44 /* Motorola Powerline MU Gateway */ + +/* + * TODO:remove adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +extern unsigned int adm5120_eth_num_ports; +extern unsigned char adm5120_eth_macs[6][6]; +extern unsigned char adm5120_eth_vlans[6]; + +extern void adm5120_soc_init(void) __init; +extern void adm5120_mem_init(void) __init; +extern void adm5120_ndelay(u32 ns); + +extern void (*adm5120_board_reset)(void); + +extern void adm5120_gpio_init(void) __init; +extern void adm5120_gpio_csx0_enable(void) __init; +extern void adm5120_gpio_csx1_enable(void) __init; +extern void adm5120_gpio_ew_enable(void) __init; + +static inline int adm5120_package_pqfp(void) +{ + return (adm5120_package == ADM5120_PACKAGE_PQFP); +} + +static inline int adm5120_package_bga(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_pci(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_gmii(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +#endif /* _MACH_ADM5120_INFO_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_intc.h new file mode 100644 index 0000000000..52883cf2dc --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_intc.h @@ -0,0 +1,63 @@ +/* + * ADM5120 interrupt controller definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in interrupt controller. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INTC_H +#define _MACH_ADM5120_INTC_H + +/* + * INTC register offsets + */ +#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ +#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ +#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ +#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ +#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR +#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ +#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ +#define INTC_REG_IRQ_TEST_SOURCE 0x1C +#define INTC_REG_IRQ_SOURCE_SELECT 0x20 +#define INTC_REG_INT_LEVEL 0x24 + +/* + * INTC IRQ numbers + */ +#define INTC_IRQ_TIMER 0 /* built in timer */ +#define INTC_IRQ_UART0 1 /* built-in UART0 */ +#define INTC_IRQ_UART1 2 /* built-in UART1 */ +#define INTC_IRQ_USBC 3 /* USB Host Controller */ +#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ +#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ +#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ +#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ +#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ +#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ +#define INTC_IRQ_LAST INTC_IRQ_SWITCH +#define INTC_IRQ_COUNT 10 + +/* + * INTC register bits + */ +#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER ) +#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 ) +#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 ) +#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC ) +#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 ) +#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 ) +#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 ) +#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 ) +#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 ) +#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH ) +#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1) + +#endif /* _MACH_ADM5120_INTC_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h new file mode 100644 index 0000000000..5383659dbf --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h @@ -0,0 +1,92 @@ +/* + * ADM5120 MPMC (Multiport Memory Controller) register definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_MPMC_H +#define _MACH_ADM5120_MPMC_H + +#define MPMC_READ_REG(r) __raw_readl( \ + (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) +#define MPMC_WRITE_REG(r, v) __raw_writel((v), \ + (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) + +#define MPMC_REG_CTRL 0x0000 +#define MPMC_REG_STATUS 0x0004 +#define MPMC_REG_CONF 0x0008 +#define MPMC_REG_DC 0x0020 +#define MPMC_REG_DR 0x0024 +#define MPMC_REG_DRP 0x0030 + +#define MPMC_REG_DC0 0x0100 +#define MPMC_REG_DRC0 0x0104 +#define MPMC_REG_DC1 0x0120 +#define MPMC_REG_DRC1 0x0124 +#define MPMC_REG_DC2 0x0140 +#define MPMC_REG_DRC2 0x0144 +#define MPMC_REG_DC3 0x0160 +#define MPMC_REG_DRC3 0x0164 +#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ +#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ +#define MPMC_REG_SC2 0x0240 +#define MPMC_REG_WEN2 0x0244 +#define MPMC_REG_OEN2 0x0248 +#define MPMC_REG_RD2 0x024C +#define MPMC_REG_PG2 0x0250 +#define MPMC_REG_WR2 0x0254 +#define MPMC_REG_TN2 0x0258 +#define MPMC_REG_SC3 0x0260 + +/* Control register bits */ +#define MPMC_CTRL_AM ( 1 << 1 ) /* Address Mirror */ +#define MPMC_CTRL_LPM ( 1 << 2 ) /* Low Power Mode */ +#define MPMC_CTRL_DWB ( 1 << 3 ) /* Drain Write Buffers */ + +/* Status register bits */ +#define MPMC_STATUS_BUSY ( 1 << 0 ) /* Busy */ +#define MPMC_STATUS_WBS ( 1 << 1 ) /* Write Buffer Status */ +#define MPMC_STATUS_SRA ( 1 << 2 ) /* Self-Refresh Acknowledge*/ + +/* Dynamic Control register bits */ +#define MPMC_DC_CE ( 1 << 0 ) +#define MPMC_DC_DMC ( 1 << 1 ) +#define MPMC_DC_SRR ( 1 << 2 ) +#define MPMC_DC_SI_SHIFT 7 +#define MPMC_DC_SI_MASK ( 3 << 7 ) +#define MPMC_DC_SI_NORMAL ( 0 << 7 ) +#define MPMC_DC_SI_MODE ( 1 << 7 ) +#define MPMC_DC_SI_PALL ( 2 << 7 ) +#define MPMC_DC_SI_NOP ( 3 << 7 ) + +#define SRAM_REG_CONF 0x00 +#define SRAM_REG_WWE 0x04 +#define SRAM_REG_WOE 0x08 +#define SRAM_REG_WRD 0x0C +#define SRAM_REG_WPG 0x10 +#define SRAM_REG_WWR 0x14 +#define SRAM_REG_WTR 0x18 + +/* Dynamic Configuration register bits */ +#define DC_BE (1 << 19) /* buffer enable */ +#define DC_RW_SHIFT 28 /* shift for number of rows */ +#define DC_RW_MASK 0x03 +#define DC_NB_SHIFT 26 /* shift for number of banks */ +#define DC_NB_MASK 0x01 +#define DC_CW_SHIFT 22 /* shift for number of columns */ +#define DC_CW_MASK 0x07 +#define DC_DW_SHIFT 7 /* shift for device width */ +#define DC_DW_MASK 0x03 + +/* Static Configuration register bits */ +#define SC_MW_MASK 0x03 /* memory width mask */ +#define SC_MW_8 0x00 /* 8 bit memory width */ +#define SC_MW_16 0x01 /* 16 bit memory width */ +#define SC_MW_32 0x02 /* 32 bit memory width */ + +#endif /* _MACH_ADM5120_MPMC_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_nand.h new file mode 100644 index 0000000000..636d27fecf --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_nand.h @@ -0,0 +1,89 @@ +/* + * ADM5120 NAND interface definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in NAND interface. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * NAND interface routines was based on a driver for Linux 2.6.19+ which + * was derived from the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series boards. + * Copyright (C) 2007 David Goodenough + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_NAND_H +#define _MACH_ADM5120_NAND_H + +#include +#include + +#include +#include + +/* NAND control registers */ +#define NAND_REG_DATA 0x0 /* data register */ +#define NAND_REG_SET_CEn 0x1 /* CE# low */ +#define NAND_REG_CLR_CEn 0x2 /* CE# high */ +#define NAND_REG_CLR_CLE 0x3 /* CLE low */ +#define NAND_REG_SET_CLE 0x4 /* CLE high */ +#define NAND_REG_CLR_ALE 0x5 /* ALE low */ +#define NAND_REG_SET_ALE 0x6 /* ALE high */ +#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */ +#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */ +#define NAND_REG_SET_WPn 0x9 /* WP# low */ +#define NAND_REG_CLR_WPn 0xA /* WP# high */ +#define NAND_REG_STATUS 0xB /* Status register */ + +#define ADM5120_NAND_STATUS_READY 0x80 + +#define NAND_READ_REG(r) \ + readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) +#define NAND_WRITE_REG(r, v) \ + writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) + +/*-------------------------------------------------------------------------*/ + +static inline void adm5120_nand_enable(void) +{ + SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE); + SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1); +} + +static inline void adm5120_nand_set_wpn(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1); +} + +static inline void adm5120_nand_set_spn(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1); +} + +static inline void adm5120_nand_set_cle(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1); +} + +static inline void adm5120_nand_set_ale(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1); +} + +static inline void adm5120_nand_set_cen(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1); +} + +static inline u8 adm5120_nand_get_status(void) +{ + return NAND_READ_REG(NAND_REG_STATUS); +} + +#endif /* _MACH_ADM5120_NAND_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_platform.h new file mode 100644 index 0000000000..9d2e430cd8 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_platform.h @@ -0,0 +1,87 @@ +/* + * ADM5120 specific platform definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H +#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct adm5120_flash_platform_data { + void (*set_vpp)(struct map_info *, int); + void (*switch_bank)(unsigned); + u32 window_size; +#ifdef CONFIG_MTD_PARTITIONS + unsigned int nr_parts; + struct mtd_partition *parts; +#endif +}; + +struct adm5120_switch_platform_data { + /* TODO: not yet implemented */ +}; + +struct adm5120_pci_irq { + u8 slot; + u8 func; + u8 pin; + unsigned irq; +}; + +#define PCIIRQ(s,f,p,i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)} + +#ifdef CONFIG_PCI +extern void adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) __init; +#else +static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) +{ +} +#endif + +extern void adm5120_setup_eth_macs(u8 *mac_base) __init; + +extern struct adm5120_flash_platform_data adm5120_flash0_data; +extern struct adm5120_flash_platform_data adm5120_flash1_data; + +extern void adm5120_add_device_flash(unsigned id) __init; +extern void adm5120_add_device_usb(void) __init; +extern void adm5120_add_device_uart(unsigned id) __init; +extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init; +extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init; +extern void adm5120_add_device_gpio(u32 disable_mask) __init; +extern void adm5120_add_device_gpio_buttons(unsigned nbuttons, + struct gpio_button *buttons) __init; + +#define GPIO_LED_DEF(g, n, t, a) { \ + .name = (n), \ + .default_trigger = (t), \ + .gpio = (g), \ + .active_low = (a) \ +} + +#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0) +#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1) + +extern void adm5120_add_device_gpio_leds(unsigned num_leds, + struct gpio_led *leds) __init; + +#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_switch.h new file mode 100644 index 0000000000..91adc5bae9 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_switch.h @@ -0,0 +1,300 @@ +/* + * ADM5120 ethernet switch definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in Ethernet switch. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_SWITCH_H +#define _MACH_ADM5120_SWITCH_H + +#ifndef BIT +# define BIT(at) (1 << (at)) +#endif +#define BITMASK(len) (BIT(len)-1) + +#define SW_READ_REG(r) __raw_readl( \ + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) +#define SW_WRITE_REG(r, v) __raw_writel((v), \ + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) + +/* Switch register offsets */ +#define SWITCH_REG_CODE 0x0000 +#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */ +#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */ +#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */ +#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */ +#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */ +#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */ +#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */ +#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */ +#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */ +#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */ +#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */ +#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */ +#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */ +#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */ +#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */ +#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */ +#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */ +#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */ +#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */ +#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */ +#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */ +#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */ +#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */ +#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */ +#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */ +#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */ +#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */ +#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */ +#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */ +#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */ +#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */ +#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */ + +#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */ +#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */ +#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */ +#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */ +#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */ +#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */ +#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */ +#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */ + +#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */ +#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */ + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +/* CODE register bits */ +#define CODE_PC_MASK BITMASK(16) /* Product Code */ +#define CODE_REV_SHIFT 16 +#define CODE_REV_MASK BITMASK(4) /* Product Revision */ +#define CODE_CLKS_SHIFT 20 +#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ +#define CODE_CLKS_175 0 /* 175 MHz */ +#define CODE_CLKS_200 1 /* 200 MHz */ +#define CODE_CLKS_225 2 /* 225 MHz */ +#define CODE_CLKS_250 3 /* 250 MHz */ +#define CODE_NAB BIT(24) /* NAND boot */ +#define CODE_PK_MASK BITMASK(1) /* Package type */ +#define CODE_PK_SHIFT 29 +#define CODE_PK_BGA 0 /* BGA package */ +#define CODE_PK_PQFP 1 /* PQFP package */ + +/* MEMCTRL register bits */ +#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ +#define MEMCTRL_SDRS_4M 0x01 +#define MEMCTRL_SDRS_8M 0x02 +#define MEMCTRL_SDRS_16M 0x03 +#define MEMCTRL_SDRS_64M 0x04 +#define MEMCTRL_SDRS_128M 0x05 +#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */ + +#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ +#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ +#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ +#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ +#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ +#define MEMCTRL_SRS_1M 0x02 /* 1MB */ +#define MEMCTRL_SRS_2M 0x03 /* 2MB */ +#define MEMCTRL_SRS_4M 0x04 /* 4MB */ + +/* Port bits used in various registers */ +#define SWITCH_PORT_PHY0 BIT(0) +#define SWITCH_PORT_PHY1 BIT(1) +#define SWITCH_PORT_PHY2 BIT(2) +#define SWITCH_PORT_PHY3 BIT(3) +#define SWITCH_PORT_PHY4 BIT(4) +#define SWITCH_PORT_MII BIT(5) +#define SWITCH_PORT_CPU BIT(6) + +/* Port bit shorthands */ +#define SWITCH_PORTS_PHY 0x1F /* phy ports */ +#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */ +#define SWITCH_PORTS_ALL 0x7F /* all ports */ + +/* CPUP_CONF register bits */ +#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */ +#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */ +#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */ +#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */ +#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */ +#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */ + +/* PORT_CONF0 register bits */ +#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */ +#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */ +#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */ + +/* PORT_CONF1 register bits */ +#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */ +#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */ +#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */ + +/* SEND_TRIG register bits */ +#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */ +#define SEND_TRIG_STH BIT(1) /* Send Trigger High */ + +/* MAC_WT0 register bits */ +#define MAC_WT0_MAWC BIT(0) /* MAC address write command */ +#define MAC_WT0_MWD_SHIFT 1 +#define MAC_WT0_MWD BIT(1) /* MAC write done */ +#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */ +#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */ +#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */ +#define MAC_WT0_WPMN_SHIFT 7 +#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */ +#define MAC_WT0_WAF_EMPTY 0 +#define MAC_WT0_WAF_STATIC 7 /* age: static */ +#define MAC_WT0_MAC0_SHIFT 16 +#define MAC_WT0_MAC1_SHIFT 24 + +/* MAC_WT1 register bits */ +#define MAC_WT1_MAC2_SHIFT 0 +#define MAC_WT1_MAC3_SHIFT 8 +#define MAC_WT1_MAC4_SHIFT 16 +#define MAC_WT1_MAC5_SHIFT 24 + +/* BW_CNTL0/BW_CNTL1 register bits */ +#define BW_CNTL_DISABLE 0x00 +#define BW_CNTL_64K 0x01 +#define BW_CNTL_128K 0x02 +#define BW_CNTL_256K 0x03 +#define BW_CNTL_512K 0x04 +#define BW_CNTL_1M 0x05 +#define BW_CNTL_4M 0x06 +#define BW_CNTL_10M 0x07 + +#define P4TBC_SHIFT 0 +#define P4RBC_SHIFT 4 +#define P5TBC_SHIFT 8 +#define P5RBC_SHIFT 12 + +#define BW_CNTL1_NAND_ENABLE 0x100 + +/* PHY_CNTL0 register bits */ +#define PHY_CNTL0_PHYA_MASK BITMASK(5) +#define PHY_CNTL0_PHYR_MASK BITMASK(5) +#define PHY_CNTL0_PHYR_SHIFT 8 +#define PHY_CNTL0_WC BIT(13) /* Write Command */ +#define PHY_CNTL0_RC BIT(14) /* Read Command */ +#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */ +#define PHY_CNTL0_WTD_SHIFT 16 + +/* PHY_CNTL1 register bits */ +#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */ +#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */ +#define PHY_CNTL1_RD_MASK BITMASK(16) +#define PHY_CNTL1_RD_SHIFT 16 + +/* PHY_CNTL2 register bits */ +#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */ +#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */ +#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */ +#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */ +#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */ +#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */ +/* PHY_CNTL2_RMAE is bad in datasheet */ +#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */ + +/* PHY_CNTL3 register bits */ +#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */ + +/* PORT_TH register bits */ +#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */ +#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */ +#define PORT_TH_CPUT_MASK BITMASK(8) +#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */ +#define PORT_TH_CPUHT_MASK BITMASK(8) +#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */ +#define PORT_TH_CPURT_MASK BITMASK(8) + +/* EMPTY_CNT register bits */ +#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */ + +/* GPIO_CONF0 register bits */ +#define GPIO_CONF0_MASK BITMASK(8) +#define GPIO_CONF0_IM_SHIFT 0 +#define GPIO_CONF0_IV_SHIFT 8 +#define GPIO_CONF0_OE_SHIFT 16 +#define GPIO_CONF0_OV_SHIFT 24 +#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) +#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) +#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) +#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) + +/* GPIO_CONF2 register bits */ +#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */ +#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */ +#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */ + +/* INT_STATUS/INT_MASK register bits */ +#define SWITCH_INT_SHD BIT(0) /* Send High Done */ +#define SWITCH_INT_SLD BIT(1) /* Send Low Done */ +#define SWITCH_INT_RHD BIT(2) /* Receive High Done */ +#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */ +#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */ +#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */ +#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */ +#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */ +#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */ +#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */ +#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */ +#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */ +#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */ +#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */ +#define SWITCH_INT_MD BIT(15) /* Must Drop */ +#define SWITCH_INT_BCS BIT(16) /* BC Storm */ +#define SWITCH_INT_PSC BIT(18) /* Port Status Change */ +#define SWITCH_INT_ID BIT(19) /* Intruder Detected */ +#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */ +#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */ +#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */ +#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */ +#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */ + +/* TIMER_INT register bits */ +#define TIMER_INT_TOS BIT(0) /* time-out status */ +#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */ + +/* TIMER register bits */ +#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ +#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ +#define TIMER_TE BIT(16) /* timer enable bit */ + +/* PORTx_LED register bits */ +#define LED_MODE_MASK BITMASK(4) +#define LED_MODE_INPUT 0 +#define LED_MODE_FLASH 1 +#define LED_MODE_OUT_HIGH 2 +#define LED_MODE_OUT_LOW 3 +#define LED_MODE_LINK 4 +#define LED_MODE_SPEED 5 +#define LED_MODE_DUPLEX 6 +#define LED_MODE_ACT 7 +#define LED_MODE_COLL 8 +#define LED_MODE_LINK_ACT 9 +#define LED_MODE_DUPLEX_COLL 10 +#define LED_MODE_10M_ACT 11 +#define LED_MODE_100M_ACT 12 +#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ +#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ +#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ +#define LED0_IV_SHIFT 12 /* LED0 input value shift */ +#define LED1_IV_SHIFT 13 /* LED1 input value shift */ +#define LED2_IV_SHIFT 14 /* LED2 input value shift */ + +#endif /* _MACH_ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_uart.h new file mode 100644 index 0000000000..6308f6bd18 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/adm5120_uart.h @@ -0,0 +1,64 @@ +/* + * ADM5120 UART definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in UARTs. + * + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_UART_H +#define _MACH_ADM5120_UART_H + +#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) + +#define UART_REG_DATA 0x00 +#define UART_REG_RSR 0x04 +#define UART_REG_ECR UART_REG_RSR +#define UART_REG_LCRH 0x08 +#define UART_REG_LCRM 0x0C +#define UART_REG_LCRL 0x10 +#define UART_REG_CTRL 0x14 +#define UART_REG_FLAG 0x18 + +/* Receive Status Register bits */ +#define UART_RSR_FE ( 1 << 0 ) +#define UART_RSR_PE ( 1 << 1 ) +#define UART_RSR_BE ( 1 << 2 ) +#define UART_RSR_OE ( 1 << 3 ) +#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE ) + +#define UART_ECR_ALL 0xFF + +/* Line Control High register bits */ +#define UART_LCRH_BRK ( 1 << 0 ) /* send break */ +#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */ +#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */ +#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */ +#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */ +#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ + +#define UART_LCRH_WLEN5 ( 0 << 5 ) +#define UART_LCRH_WLEN6 ( 1 << 5 ) +#define UART_LCRH_WLEN7 ( 2 << 5 ) +#define UART_LCRH_WLEN8 ( 3 << 5 ) + +/* Control register bits */ +#define UART_CTRL_EN ( 1 << 0 ) + +/* Flag register bits */ +#define UART_FLAG_CTS ( 1 << 0 ) +#define UART_FLAG_DSR ( 1 << 1 ) +#define UART_FLAG_DCD ( 1 << 2 ) +#define UART_FLAG_BUSY ( 1 << 3 ) +#define UART_FLAG_RXFE ( 1 << 4 ) +#define UART_FLAG_TXFF ( 1 << 5 ) +#define UART_FLAG_RXFF ( 1 << 6 ) +#define UART_FLAG_TXFE ( 1 << 7 ) + +#endif /* _MACH_ADM5120_UART_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/asm/sizes.h new file mode 100644 index 0000000000..503843db15 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/asm/sizes.h @@ -0,0 +1,56 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size definitions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_16 0x00000010 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h new file mode 100644 index 0000000000..c6310cc6e6 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h @@ -0,0 +1,71 @@ +/* + * ADM5120 specific CPU feature overrides + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H + +/* + * The ADM5120 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +/* #define cpu_has_vce ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +#define cpu_has_prefetch 1 +/* #define cpu_has_mcheck ? */ +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +/* #define cpu_has_inclusive_pcaches ? */ + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/gpio.h new file mode 100644 index 0000000000..7ba7efca1f --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/gpio.h @@ -0,0 +1,115 @@ +/* + * ADM5120 GPIO wrappers for arch-neutral GPIO calls + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H +#define _ASM_MIPS_MACH_ADM5120_GPIO_H + +#define ARCH_NR_GPIOS 64 + +#include + +#include + +#define ADM5120_GPIO_PIN0 0 +#define ADM5120_GPIO_PIN1 1 +#define ADM5120_GPIO_PIN2 2 +#define ADM5120_GPIO_PIN3 3 +#define ADM5120_GPIO_PIN4 4 +#define ADM5120_GPIO_PIN5 5 +#define ADM5120_GPIO_PIN6 6 +#define ADM5120_GPIO_PIN7 7 +#define ADM5120_GPIO_P0L0 8 +#define ADM5120_GPIO_P0L1 9 +#define ADM5120_GPIO_P0L2 10 +#define ADM5120_GPIO_P1L0 11 +#define ADM5120_GPIO_P1L1 12 +#define ADM5120_GPIO_P1L2 13 +#define ADM5120_GPIO_P2L0 14 +#define ADM5120_GPIO_P2L1 15 +#define ADM5120_GPIO_P2L2 16 +#define ADM5120_GPIO_P3L0 17 +#define ADM5120_GPIO_P3L1 18 +#define ADM5120_GPIO_P3L2 19 +#define ADM5120_GPIO_P4L0 20 +#define ADM5120_GPIO_P4L1 21 +#define ADM5120_GPIO_P4L2 22 +#define ADM5120_GPIO_MAX 22 +#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 + +#define ADM5120_GPIO_LOW 0 +#define ADM5120_GPIO_HIGH 1 + +#define ADM5120_GPIO_SWITCH 0x10 +#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) +#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) +#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) +#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) +#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) +#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) +#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) +#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) +#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) +#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) + +extern int __adm5120_gpio0_get_value(unsigned gpio); +extern void __adm5120_gpio0_set_value(unsigned gpio, int value); +extern int __adm5120_gpio1_get_value(unsigned gpio); +extern void __adm5120_gpio1_set_value(unsigned gpio, int value); +extern int adm5120_gpio_to_irq(unsigned gpio); +extern int adm5120_irq_to_gpio(unsigned irq); + +static inline int gpio_get_value(unsigned gpio) +{ + int ret; + + switch (gpio) { + case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: + ret = __adm5120_gpio0_get_value(gpio); + break; + case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: + ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0); + break; + default: + ret = __gpio_get_value(gpio); + break; + } + + return ret; +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + switch (gpio) { + case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: + __adm5120_gpio0_set_value(gpio, value); + break; + case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: + __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value); + break; + default: + __gpio_set_value(gpio, value); + break; + } +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return adm5120_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return adm5120_irq_to_gpio(irq); +} + +#define gpio_cansleep __gpio_cansleep + +#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/irq.h new file mode 100644 index 0000000000..b0350c8b83 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/irq.h @@ -0,0 +1,43 @@ +/* + * ADM5120 specific IRQ numbers + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H +#define _ASM_MIPS_MACH_ADM5120_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 24 + +#include_next + +#include + +#define NO_IRQ (-1) + +#define MIPS_CPU_IRQ_COUNT 8 +#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) + +#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT) +#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) + +#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2) +#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7) + +#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) +#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) +#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) +#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) +#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) +#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) +#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) +#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) +#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) +#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) + +#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h new file mode 100644 index 0000000000..fa42bf7148 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/admboot.h @@ -0,0 +1,17 @@ +/* + * ADMBoot specific definitions + * + * Copyright (C) 2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ADMBOOT_H +#define _ADMBOOT_H + +extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init; + +#endif /* _ADMBOOT_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h new file mode 100644 index 0000000000..0cb3eee70e --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/cfe.h @@ -0,0 +1,18 @@ +/* + * Broadcom's CFE definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_CFE_H_ +#define _PROM_CFE_H_ + +extern int cfe_present(void) __init; +extern char *cfe_getenv(char *); + +#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h new file mode 100644 index 0000000000..778df24677 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/generic.h @@ -0,0 +1,18 @@ +/* + * Generic prom definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_GENERIC_H_ +#define _PROM_GENERIC_H_ + +extern int generic_prom_present(void) __init; +extern char *generic_prom_getenv(char *); + +#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h new file mode 100644 index 0000000000..ea8db81ed3 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/myloader.h @@ -0,0 +1,179 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* + * Firmware file format: + * + *
+ * [] + * ... + * [] + * + * [] + * ... + * [] + * + * + */ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_FIRMWARE 0x4C594D00 +#define MYLO_MAGIC_20021103 0x20021103 +#define MYLO_MAGIC_20021107 0x20021107 + +#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 +#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 +#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 + +/* + * Addresses of the data structures provided by MyLoader + */ +#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ +#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ +#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ +#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_fw_header { + uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ + uint32_t crc; /* CRC of the whole firmware */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint16_t vid; /* vendor ID */ + uint16_t did; /* device ID */ + uint16_t svid; /* sub vendor ID */ + uint16_t sdid; /* sub device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; /* FIXME: firmware version high? */ + uint32_t fwlo; /* FIXME: firmware version low? */ + uint32_t flags; /* firmware flags */ +}; + +#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ +#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ + +struct mylo_fw_blockdesc { + uint32_t type; /* block type */ + uint32_t addr; /* relative address to flash start */ + uint32_t dlen; /* size of block data in bytes */ + uint32_t blen; /* total size of block in bytes */ +}; + +#define FW_DESC_TYPE_UNUSED 0 +#define FW_DESC_TYPE_USED 1 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* Size of boot FLASH in bytes */ + uint32_t dram_size; /* Size of onboard RAM in bytes */ +}; + + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +struct myloader_info { + u32 vid; + u32 did; + u32 svid; + u32 sdid; + uint8_t macs[MYLO_ETHADDR_COUNT][6]; +}; + +extern struct myloader_info myloader_info; +extern int myloader_present(void) __init; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h new file mode 100644 index 0000000000..d5ad513d56 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/routerboot.h @@ -0,0 +1,125 @@ +/* + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +#define RB_MAC_SIZE 6 + +struct rb_bios_settings { + u32 hs_offs; /* hard settings offset */ + u32 hs_size; /* hard settings size */ + u32 fw_offs; /* firmware offset */ + u32 ss_offs; /* soft settings offset */ + u32 ss_size; /* soft settings size */ +}; + +struct rb_hard_settings { + char *name; /* board name */ + char *bios_ver; /* BIOS version */ + u32 mem_size; /* memory size in bytes */ + u32 mac_count; /* number of mac addresses */ + u8 *mac_base; /* mac address base */ +}; + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +extern int routerboot_present(void) __init; +extern char *routerboot_get_boardname(void); + +extern struct rb_hard_settings rb_hs; + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h new file mode 100644 index 0000000000..d1e3e5b941 --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/prom/zynos.h @@ -0,0 +1,86 @@ +/* + * ZyNOS (ZyXEL's Networking OS) definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ZYNOS_H +#define _ZYNOS_H + +#define ZYNOS_NAME_LEN 32 +#define ZYNOS_FEAT_BYTES 22 +#define ZYNOS_MAC_LEN 6 + +struct zynos_board_info { + unsigned char vendor[ZYNOS_NAME_LEN]; + unsigned char product[ZYNOS_NAME_LEN]; + u32 bootext_addr; + u32 res0; + u16 board_id; + u8 res1[6]; + u8 feat_other[ZYNOS_FEAT_BYTES]; + u8 feat_main; + u8 res2; + u8 mac[ZYNOS_MAC_LEN]; + u8 country; + u8 dbgflag; +} __attribute__ ((packed)); + +/* + * Vendor IDs + */ +#define ZYNOS_VENDOR_ID_ZYXEL 0 +#define ZYNOS_VENDOR_ID_NETGEAR 1 +#define ZYNOS_VENDOR_ID_DLINK 2 +#define ZYNOS_VENDOR_ID_OTHER 3 +#define ZYNOS_VENDOR_ID_LUCENT 4 + +/* + * Vendor names + */ +#define ZYNOS_VENDOR_DLINK "D-Link" +#define ZYNOS_VENDOR_LUCENT "LUCENT" +#define ZYNOS_VENDOR_NETGEAR "NetGear" +#define ZYNOS_VENDOR_ZYXEL "ZyXEL" + +/* + * Board IDs (big-endian) + */ +#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ +#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ +#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ +#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ +#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ +#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ +#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ +#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ +#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ +#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ +#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ +#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ +#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/ +#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ +#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ +#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ + +/* + * Some magic numbers (big-endian) + */ +#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ +#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ + +struct bootbase_info { + u16 vendor_id; + u16 board_id; + u8 mac[6]; +}; + +extern struct bootbase_info bootbase_info; +extern int bootbase_present(void) __init; + +#endif /* _ZYNOS_H */ diff --git a/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/war.h new file mode 100644 index 0000000000..87c35f375b --- /dev/null +++ b/target/linux/adm5120/files-2.6.28/arch/mips/include/asm/mach-adm5120/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H +#define __ASM_MIPS_MACH_ADM5120_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */ diff --git a/target/linux/adm5120/patches-2.6.28/001-adm5120.patch b/target/linux/adm5120/patches-2.6.28/001-adm5120.patch new file mode 100644 index 0000000000..01366c5e24 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/001-adm5120.patch @@ -0,0 +1,56 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -19,6 +19,21 @@ choice + prompt "System type" + default SGI_IP22 + ++config ADM5120 ++ bool "Infineon/ADMtek ADM5120 SoC based machines" ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select ARCH_REQUIRE_GPIOLIB ++ select SWAP_IO_SPACE if CPU_BIG_ENDIAN ++ select MIPS_MACHINE ++ + config MACH_ALCHEMY + bool "Alchemy processor based machines" + +@@ -597,6 +612,7 @@ config WR_PPMC + + endchoice + ++source "arch/mips/adm5120/Kconfig" + source "arch/mips/alchemy/Kconfig" + source "arch/mips/basler/excite/Kconfig" + source "arch/mips/emma/Kconfig" +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -176,6 +176,21 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre + load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 + + # ++# Infineon/ADMtek ADM5120 ++# ++libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/ ++core-$(CONFIG_ADM5120) += arch/mips/adm5120/common/ ++core-$(CONFIG_ADM5120_OEM_CELLVISION) += arch/mips/adm5120/cellvision/ ++core-$(CONFIG_ADM5120_OEM_COMPEX) += arch/mips/adm5120/compex/ ++core-$(CONFIG_ADM5120_OEM_EDIMAX) += arch/mips/adm5120/edimax/ ++core-$(CONFIG_ADM5120_OEM_INFINEON) += arch/mips/adm5120/infineon/ ++core-$(CONFIG_ADM5120_OEM_MIKROTIK) += arch/mips/adm5120/mikrotik/ ++core-$(CONFIG_ADM5120_OEM_MOTOROLA) += arch/mips/adm5120/motorola/ ++core-$(CONFIG_ADM5120_OEM_ZYXEL) += arch/mips/adm5120/zyxel/ ++cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120 ++load-$(CONFIG_ADM5120) += 0xffffffff80001000 ++ ++# + # Common Alchemy Au1x00 stuff + # + core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/ diff --git a/target/linux/adm5120/patches-2.6.28/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.28/002-adm5120_flash.patch new file mode 100644 index 0000000000..16470704a6 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/002-adm5120_flash.patch @@ -0,0 +1,22 @@ +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -540,5 +540,9 @@ config MTD_PLATRAM + + This selection automatically selects the map_ram driver. + ++config MTD_ADM5120 ++ tristate "Map driver for ADM5120 based boards" ++ depends on ADM5120 ++ + endmenu + +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o + obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o ++obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/adm5120/patches-2.6.28/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.28/003-adm5120_switch.patch new file mode 100644 index 0000000000..1359078aaf --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/003-adm5120_switch.patch @@ -0,0 +1,23 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -602,6 +602,10 @@ config MIPS_AU1X00_ENET + If you have an Alchemy Semi AU1X00 based system + say Y. Otherwise, say N. + ++config ADM5120_ENET ++ tristate "ADM5120 Ethernet switch support" ++ depends on ADM5120 ++ + config SGI_IOC3_ETH + bool "SGI IOC3 Ethernet" + depends on PCI && SGI_IP27 +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -191,6 +191,7 @@ obj-$(CONFIG_SC92031) += sc92031.o + # This is also a 82596 and should probably be merged + obj-$(CONFIG_LP486E) += lp486e.o + ++obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o + obj-$(CONFIG_ETH16I) += eth16i.o + obj-$(CONFIG_ZORRO8390) += zorro8390.o + obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120/patches-2.6.28/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.28/005-adm5120_usb.patch new file mode 100644 index 0000000000..75cd81b791 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/005-adm5120_usb.patch @@ -0,0 +1,33 @@ +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ + obj-$(CONFIG_USB_U132_HCD) += host/ + obj-$(CONFIG_USB_R8A66597_HCD) += host/ + obj-$(CONFIG_USB_HWA_HCD) += host/ ++obj-$(CONFIG_USB_ADM5120_HCD) += host/ + + obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -4,6 +4,10 @@ + comment "USB Host Controller Drivers" + depends on USB + ++config USB_ADM5120_HCD ++ tristate "ADM5120 HCD support (EXPERIMENTAL)" ++ depends on USB && ADM5120 && EXPERIMENTAL ++ + config USB_C67X00_HCD + tristate "Cypress C67x00 HCD support" + depends on USB +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/ + + obj-$(CONFIG_PCI) += pci-quirks.o + ++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o + obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o diff --git a/target/linux/adm5120/patches-2.6.28/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.28/007-adm5120_pci.patch new file mode 100644 index 0000000000..c3e0bea2d6 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/007-adm5120_pci.patch @@ -0,0 +1,19 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc + obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o + obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o + obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o ++obj-$(CONFIG_ADM5120) += pci-adm5120.o +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -1723,6 +1723,9 @@ + #define PCI_VENDOR_ID_ESDGMBH 0x12fe + #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 + ++#define PCI_VENDOR_ID_ADMTEK 0x1317 ++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 ++ + #define PCI_VENDOR_ID_SIIG 0x131f + #define PCI_SUBVENDOR_ID_SIIG 0x131f + #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120/patches-2.6.28/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.28/009-adm5120_leds_switch_trigger.patch new file mode 100644 index 0000000000..4b8f8833dd --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/009-adm5120_leds_switch_trigger.patch @@ -0,0 +1,22 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -223,4 +223,12 @@ config LEDS_TRIGGER_NETDEV + This allows LEDs to be controlled by network device activity. + If unsure, say Y. + ++config LEDS_TRIGGER_ADM5120_SWITCH ++ tristate "LED ADM5120 Switch Port Status Trigger" ++ depends on LEDS_TRIGGERS && ADM5120 ++ help ++ This allows LEDs to be controlled by the port states of ++ the ADM5120 built-in Ethernet Switch ++ If unsure, say N. ++ + endif # NEW_LEDS +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -32,3 +32,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += + obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o + obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o ++obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.28/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.28/101-cfi_fixup_macronix_bootloc.patch new file mode 100644 index 0000000000..d13ddaf631 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/101-cfi_fixup_macronix_bootloc.patch @@ -0,0 +1,91 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -44,12 +44,19 @@ + #define MANUFACTURER_AMD 0x0001 + #define MANUFACTURER_ATMEL 0x001F + #define MANUFACTURER_SST 0x00BF ++#define MANUFACTURER_MACRONIX 0x00C2 + #define SST49LF004B 0x0060 + #define SST49LF040B 0x0050 + #define SST49LF008A 0x005a + #define AT49BV6416 0x00d6 + #define MANUFACTURER_SAMSUNG 0x00ec + ++/* Macronix */ ++#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ ++#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ ++#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ ++#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ ++ + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +@@ -240,6 +247,41 @@ static void fixup_s29gl032n_sectors(stru + } + } + ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++/* ++ * Some Macronix chips has no/bad bootblock information in the CFI table ++ */ ++static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) ++{ ++ struct map_info *map = mtd->priv; ++ struct cfi_private *cfi = map->fldrv_priv; ++ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; ++ __u8 t; ++ ++ switch (cfi->id) { ++ /* TODO: put affected chip ids here */ ++ case MX29LV160B: ++ case MX29LV320B: ++ t = 2; /* Bottom boot */ ++ break; ++ case MX29LV160T: ++ case MX29LV320T: ++ t = 3; /* Top boot */ ++ break; ++ default: ++ return; ++ } ++ ++ if (extp->TopBottom == t) ++ /* boot location detected by the CFI layer is correct */ ++ return; ++ ++ extp->TopBottom = t; ++ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " ++ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); ++} ++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ ++ + static struct cfi_fixup cfi_fixup_table[] = { + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + #ifdef AMD_BOOTLOC_BUG +@@ -275,6 +317,9 @@ static struct cfi_fixup fixup_table[] = + */ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, ++#endif + { 0, 0, NULL, NULL } + }; + +--- a/drivers/mtd/chips/Kconfig ++++ b/drivers/mtd/chips/Kconfig +@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD + provides support for one of those command sets, used on chips + including the AMD Am29LV320. + ++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ bool "Fix boot-block location for Macronix flash chips" ++ depends on MTD_CFI_AMDSTD ++ help ++ Some Macronix flash chips have no/wrong boot-block location in the ++ CFI table, and the driver may detect the type incorrectly. Select ++ this if your board has such chip. ++ + config MTD_CFI_STAA + tristate "Support for ST (Advanced Architecture) flash chips" + depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120/patches-2.6.28/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.28/102-jedec_pmc_39lvxxx_chips.patch new file mode 100644 index 0000000000..6c827c851a --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/102-jedec_pmc_39lvxxx_chips.patch @@ -0,0 +1,68 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -128,6 +128,10 @@ + #define UPD29F064115 0x221C + + /* PMC */ ++#define PM39LV512 0x001B ++#define PM39LV010 0x001C ++#define PM39LV020 0x003D ++#define PM39LV040 0x003E + #define PM49FL002 0x006D + #define PM49FL004 0x006E + #define PM49FL008 0x006A +@@ -1248,6 +1252,54 @@ static const struct amd_flash_info jedec + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV512, ++ .name = "PMC Pm39LV512", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_64KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,16), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV010, ++ .name = "PMC Pm39LV010", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_128KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,32), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV020, ++ .name = "PMC Pm39LV020", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_256KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,64), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV040, ++ .name = "PMC Pm39LV040", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_512KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,128), ++ } + }, { + .mfr_id = MANUFACTURER_PMC, + .dev_id = PM49FL002, diff --git a/target/linux/adm5120/patches-2.6.28/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.28/103-mtd_trxsplit.patch new file mode 100644 index 0000000000..d3b0858040 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/103-mtd_trxsplit.patch @@ -0,0 +1,24 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -55,6 +55,11 @@ config MTD_ROOTFS_SPLIT + depends on MTD_PARTITIONS + default y + ++config MTD_TRXSPLIT ++ bool "Automatically find and split TRX partitions" ++ depends on MTD_PARTITIONS ++ default n ++ + config MTD_REDBOOT_PARTS + tristate "RedBoot partition table parsing" + depends on MTD_PARTITIONS +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o + mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o + + obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o ++obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120/patches-2.6.28/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.28/120-rb153_cf_driver.patch new file mode 100644 index 0000000000..32e85907b6 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/120-rb153_cf_driver.patch @@ -0,0 +1,28 @@ +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o + obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o + obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o + obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o ++obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o + # Should be last but two libata driver + obj-$(CONFIG_PATA_ACPI) += pata_acpi.o + # Should be last but one libata driver +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -567,6 +567,15 @@ config PATA_RADISYS + + If unsure, say N. + ++config PATA_RB153_CF ++ tristate "RouterBOARD 153 Compact Flash support" ++ depends on ADM5120_MACH_RB_153 ++ help ++ This option enables support for a Compact Flash connected on ++ the RouterBOARD 153. ++ ++ If unsure, say N. ++ + config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 diff --git a/target/linux/adm5120/patches-2.6.28/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.28/140-cmdline_hack.patch new file mode 100644 index 0000000000..14172fcaf9 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/140-cmdline_hack.patch @@ -0,0 +1,15 @@ +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S +@@ -127,7 +127,12 @@ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. ++ * Use as temporary storage for the kernel command line, so that it ++ * can be updated easily without having to relink the kernel. + */ ++ ++EXPORT(_image_cmdline) ++ .ascii "CMDLINE:" + .fill 0x400 + #endif + diff --git a/target/linux/adm5120/patches-2.6.28/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.28/200-amba_pl010_hacks.patch new file mode 100644 index 0000000000..285764411e --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/200-amba_pl010_hacks.patch @@ -0,0 +1,378 @@ +--- a/drivers/serial/amba-pl010.c ++++ b/drivers/serial/amba-pl010.c +@@ -50,11 +50,10 @@ + + #include + +-#define UART_NR 8 +- + #define SERIAL_AMBA_MAJOR 204 + #define SERIAL_AMBA_MINOR 16 +-#define SERIAL_AMBA_NR UART_NR ++#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS ++#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME + + #define AMBA_ISR_PASS_LIMIT 256 + +@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_start_tx(struct uart_port *port) +@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_stop_rx(struct uart_port *port) +@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_enable_ms(struct uart_port *port) +@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_rx_chars(struct uart_amba_port *uap) +@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a + struct tty_struct *tty = uap->port.info->port.tty; + unsigned int status, ch, flag, rsr, max_count = 256; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { +- ch = readb(uap->port.membase + UART01x_DR); ++ ch = __raw_readl(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; +@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a + * Note that the error handling code is + * out of the main execution path + */ +- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; ++ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { +- writel(0, uap->port.membase + UART01x_ECR); ++ __raw_writel(0, uap->port.membase + UART01x_ECR); + + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); +@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); +@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a + int count; + + if (uap->port.x_char) { +- writel(uap->port.x_char, uap->port.membase + UART01x_DR); ++ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; +@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a + + count = uap->port.fifosize >> 1; + do { +- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); ++ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) +@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua + { + unsigned int status, delta; + +- writel(0, uap->port.membase + UART010_ICR); ++ __raw_writel(0, uap->port.membase + UART010_ICR); + +- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; +@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo + + spin_lock(&uap->port.lock); + +- status = readb(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) +@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo + if (pass_counter-- == 0) + break; + +- status = readb(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; +@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo + static unsigned int pl010_tx_empty(struct uart_port *port) + { + struct uart_amba_port *uap = (struct uart_amba_port *)port; +- unsigned int status = readb(uap->port.membase + UART01x_FR); ++ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; + } + +@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru + unsigned int result = 0; + unsigned int status; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) +@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_ + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; +- writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); + } + +@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por + /* + * initialise the old status of the modem signals + */ +- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ +- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, ++ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; +@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p + /* + * disable all interrupts, disable the port + */ +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ +- writel(readb(uap->port.membase + UART010_LCRH) & ++ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + +@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port + /* + * Ask the core to calculate the divisor for us. + */ +- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); ++ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { +@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ +- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; ++ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* Set baud rate */ + quot -= 1; +- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); +- writel(quot & 0xff, uap->port.membase + UART010_LCRL); ++ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); ++ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ +- writel(lcr_h, uap->port.membase + UART010_LCRH); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); + } +@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops = + .verify_port = pl010_verify_port, + }; + +-static struct uart_amba_port *amba_ports[UART_NR]; ++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; + + #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct + unsigned int status; + + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); +- writel(ch, uap->port.membase + UART01x_DR); ++ __raw_writel(ch, uap->port.membase + UART01x_DR); + } + + static void +@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, + /* + * First save the CR then disable the interrupts + */ +- old_cr = readb(uap->port.membase + UART010_CR); +- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); ++ old_cr = __raw_readl(uap->port.membase + UART010_CR); ++ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); + +@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, + * and restore the TCR + */ + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); + } +@@ -587,9 +586,9 @@ static void __init + pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) + { +- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { ++ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { +@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am + else + *bits = 8; + +- quot = readb(uap->port.membase + UART010_LCRL) | +- readb(uap->port.membase + UART010_LCRM) << 8; ++ quot = __raw_readl(uap->port.membase + UART010_LCRL) | ++ __raw_readl(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } + } +@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st + * if so, search for the first available port that does have + * console support. + */ +- if (co->index >= UART_NR) ++ if (co->index >= SERIAL_AMBA_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) +@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st + + static struct uart_driver amba_reg; + static struct console amba_console = { +- .name = "ttyAM", ++ .name = SERIAL_AMBA_NAME, + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, +@@ -657,11 +656,11 @@ static struct console amba_console = { + + static struct uart_driver amba_reg = { + .owner = THIS_MODULE, +- .driver_name = "ttyAM", +- .dev_name = "ttyAM", ++ .driver_name = SERIAL_AMBA_NAME, ++ .dev_name = SERIAL_AMBA_NAME, + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, +- .nr = UART_NR, ++ .nr = SERIAL_AMBA_NR, + .cons = AMBA_CONSOLE, + }; + +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010 + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a +- Cirrus Logic EP93xx CPU, say Y or M here. ++ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. + + If unsure, say N. + ++config SERIAL_AMBA_PL010_NUMPORTS ++ int "Maximum number of AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "8" ++ ---help--- ++ Set this to the number of serial ports you want the AMBA PL010 driver ++ to support. ++ ++config SERIAL_AMBA_PL010_PORTNAME ++ string "Name of the AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "ttyAM" ++ ---help--- ++ ::: To be written ::: ++ + config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120/patches-2.6.28/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.28/201-amba_bus_hacks.patch new file mode 100644 index 0000000000..299f216523 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/201-amba_bus_hacks.patch @@ -0,0 +1,13 @@ +--- a/drivers/amba/bus.c ++++ b/drivers/amba/bus.c +@@ -17,6 +17,10 @@ + #include + #include + ++#ifndef NO_IRQ ++#define NO_IRQ (-1) ++#endif ++ + #define to_amba_device(d) container_of(d, struct amba_device, dev) + #define to_amba_driver(d) container_of(d, struct amba_driver, drv) + diff --git a/target/linux/adm5120/patches-2.6.28/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.28/202-pci_disable_common_quirks.patch new file mode 100644 index 0000000000..8e66c219b8 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/202-pci_disable_common_quirks.patch @@ -0,0 +1,43 @@ +--- a/drivers/pci/Kconfig ++++ b/drivers/pci/Kconfig +@@ -42,6 +42,12 @@ config PCI_DEBUG + + When in doubt, say N. + ++config PCI_DISABLE_COMMON_QUIRKS ++ bool "PCI disable common quirks" ++ depends on PCI ++ help ++ If you don't know what to do here, say N. ++ + config HT_IRQ + bool "Interrupts on hypertransport devices" + default y +--- a/drivers/pci/quirks.c ++++ b/drivers/pci/quirks.c +@@ -33,6 +33,7 @@ int pcie_mch_quirk; + EXPORT_SYMBOL(pcie_mch_quirk); + + #ifdef CONFIG_PCI_QUIRKS ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS + /* The Mellanox Tavor device gives false positive parity errors + * Mark this device with a broken_parity_status, to allow + * PCI scanning code to "skip" this now blacklisted device. +@@ -1555,7 +1556,9 @@ static void __devinit fixup_rev1_53c810( + } + } + DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); ++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ + ++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS + /* Enable 1k I/O space granularity on the Intel P64H2 */ + static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) + { +@@ -1945,6 +1948,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT + quirk_msi_intx_disable_bug); + + #endif /* CONFIG_PCI_MSI */ ++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ + + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) + { diff --git a/target/linux/adm5120/patches-2.6.28/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.28/203-gpio_leds_brightness.patch new file mode 100644 index 0000000000..bb94fd05ea --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/203-gpio_leds_brightness.patch @@ -0,0 +1,27 @@ +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -43,13 +43,17 @@ static void gpio_led_set(struct led_clas + container_of(led_cdev, struct gpio_led_data, cdev); + int level; + +- if (value == LED_OFF) +- level = 0; +- else +- level = 1; +- +- if (led_dat->active_low) +- level = !level; ++ switch (value) { ++ case LED_OFF: ++ level = led_dat->active_low ? 1 : 0; ++ break; ++ case LED_FULL: ++ level = led_dat->active_low ? 0 : 1; ++ break; ++ default: ++ level = value; ++ break; ++ } + + /* Setting GPIOs with I2C/etc requires a task context, and we don't + * seem to have a reliable way to know if we're already in one; so diff --git a/target/linux/adm5120/patches-2.6.28/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.28/310-adm5120_wdt.patch new file mode 100644 index 0000000000..2346009f8d --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/310-adm5120_wdt.patch @@ -0,0 +1,31 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -696,6 +696,18 @@ config RC32434_WDT + To compile this driver as a module, choose M here: the + module will be called rc32434_wdt. + ++config ADM5120_WDT ++ tristate "Infineon ADM5120 SoC hardware watchdog" ++ depends on WATCHDOG && ADM5120 ++ help ++ This is a driver for hardware watchdog integrated in Infineon ++ ADM5120 SoC. This watchdog simply watches your kernel to make sure ++ it doesn't freeze, and if it does, it reboots your computer after a ++ certain amount of time. ++ ++ To compile this driver as a module, choose M here: the module will be ++ called adm5120_wdt. ++ + config INDYDOG + tristate "Indy/I2 Hardware Watchdog" + depends on SGI_HAS_INDYDOG +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o + + # PARISC Architecture + diff --git a/target/linux/adm5120/patches-2.6.28/800-usb_automatically_enable_rhsc_interrupt.patch b/target/linux/adm5120/patches-2.6.28/800-usb_automatically_enable_rhsc_interrupt.patch new file mode 100644 index 0000000000..dc0f843c86 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/800-usb_automatically_enable_rhsc_interrupt.patch @@ -0,0 +1,69 @@ +--- a/drivers/usb/host/adm5120-drv.c ++++ b/drivers/usb/host/adm5120-drv.c +@@ -174,7 +174,6 @@ static const struct hc_driver adm5120_hc + */ + .hub_status_data = admhc_hub_status_data, + .hub_control = admhc_hub_control, +- .hub_irq_enable = admhc_hub_irq_enable, + #ifdef CONFIG_PM + .bus_suspend = admhc_bus_suspend, + .bus_resume = admhc_bus_resume, +--- a/drivers/usb/host/adm5120-hub.c ++++ b/drivers/usb/host/adm5120-hub.c +@@ -63,20 +63,6 @@ + + /*-------------------------------------------------------------------------*/ + +-/* hcd->hub_irq_enable() */ +-static void admhc_hub_irq_enable(struct usb_hcd *hcd) +-{ +- struct admhcd *ahcd = hcd_to_admhcd(hcd); +- +- spin_lock_irq(&ahcd->lock); +- if (!ahcd->autostop) +- del_timer(&hcd->rh_timer); /* Prevent next poll */ +- admhc_intr_enable(ahcd, ADMHC_INTR_INSM); +- spin_unlock_irq(&ahcd->lock); +-} +- +-/*-------------------------------------------------------------------------*/ +- + /* build "status change" packet (one or two bytes) from HC registers */ + + static int +--- a/drivers/usb/host/adm5120-pm.c ++++ b/drivers/usb/host/adm5120-pm.c +@@ -432,13 +432,17 @@ static inline int admhc_rh_resume(struct + static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed, + int any_connected) + { +- int poll_rh = 1; +- +- /* keep on polling until RHSC is enabled */ ++ /* If INSM is enabled, don't poll */ + if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM) +- poll_rh = 0; ++ return 0; ++ ++ /* If no status changes are pending, enable status-change interrupts */ ++ if (!changed) { ++ admhc_intr_enable(ahcd, ADMHC_INTR_INSM); ++ return 0; ++ } + +- return poll_rh; ++ return 1; + } + + #endif /* CONFIG_PM */ +--- a/drivers/usb/host/adm5120-hcd.c ++++ b/drivers/usb/host/adm5120-hcd.c +@@ -46,7 +46,7 @@ + #include "../core/hcd.h" + #include "../core/hub.h" + +-#define DRIVER_VERSION "0.25.0" ++#define DRIVER_VERSION "0.27.0" + #define DRIVER_AUTHOR "Gabor Juhos " + #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver" + diff --git a/target/linux/adm5120/patches-2.6.28/801-mtd_trxsplit_2.6.28_fix.patch b/target/linux/adm5120/patches-2.6.28/801-mtd_trxsplit_2.6.28_fix.patch new file mode 100644 index 0000000000..6a31cd5d15 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.28/801-mtd_trxsplit_2.6.28_fix.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/trxsplit.c ++++ b/drivers/mtd/trxsplit.c +@@ -18,7 +18,7 @@ + #include + #include + +-#include ++//#include + + #define PFX "trxsplit: " + diff --git a/target/linux/adm5120/router_be/config-2.6.28 b/target/linux/adm5120/router_be/config-2.6.28 new file mode 100644 index 0000000000..893e59be91 --- /dev/null +++ b/target/linux/adm5120/router_be/config-2.6.28 @@ -0,0 +1,315 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_ADM5120=y +CONFIG_ADM5120_ENET=y +CONFIG_ADM5120_MACH_P_334WT=y +CONFIG_ADM5120_MACH_P_335=y +# CONFIG_ADM5120_OEM_CELLVISION is not set +# CONFIG_ADM5120_OEM_COMPEX is not set +# CONFIG_ADM5120_OEM_EDIMAX is not set +# CONFIG_ADM5120_OEM_INFINEON is not set +# CONFIG_ADM5120_OEM_MIKROTIK is not set +# CONFIG_ADM5120_OEM_MOTOROLA is not set +CONFIG_ADM5120_OEM_ZYXEL=y +CONFIG_ADM5120_SOC_BGA=y +CONFIG_ADM5120_WDT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_AMBA=y +CONFIG_BASE_SMALL=0 +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +# CONFIG_BCM47XX is not set +CONFIG_BINFMT_MISC=m +CONFIG_BITREVERSE=y +CONFIG_CEVT_R4K=y +CONFIG_CIFS_DEBUG2=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CLASSIC_RCU=y +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit" +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CSRC_R4K=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ELF_CORE=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_FIRMWARE_IN_KERNEL=y +# CONFIG_FREEZER is not set +CONFIG_FS_MBCACHE=m +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_ACL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IDE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HID=m +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_COMPAT=y +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +CONFIG_HID_PETALYNX=m +# CONFIG_HID_PID is not set +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IDE is not set +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_INPUT=m +# CONFIG_INPUT_EVDEV is not set +CONFIG_IPV6_MIP6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IRQ_CPU=y +# CONFIG_ISDN is not set +# CONFIG_JOLIET is not set +CONFIG_KMOD=y +# CONFIG_LEDS_ALIX is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_EMMA is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_TMIO is not set +CONFIG_MII=m +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_MINIX_FS is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_ADM5120=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_TRXSPLIT=y +# CONFIG_NET_PCI is not set +# CONFIG_NET_PKTGEN is not set +CONFIG_NF_CT_ACCT=y +CONFIG_NF_DEFRAG_IPV4=m +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PANTHERLORD_FF is not set +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROM_EMU is not set +CONFIG_RFKILL_LEDS=y +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIO=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SND_MIPS=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SSB_POSSIBLE=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_SWAP_IO_SPACE=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_TICK_ONESHOT=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB=m +CONFIG_USB_ADM5120_HCD=m +CONFIG_USB_DEBUG=y +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_MEDIA=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/router_le/config-2.6.28 b/target/linux/adm5120/router_le/config-2.6.28 new file mode 100644 index 0000000000..88f99d67a9 --- /dev/null +++ b/target/linux/adm5120/router_le/config-2.6.28 @@ -0,0 +1,373 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_8139TOO is not set +CONFIG_ADM5120=y +CONFIG_ADM5120_ENET=y +CONFIG_ADM5120_MACH_BR_6104K=y +CONFIG_ADM5120_MACH_BR_6104KP=y +CONFIG_ADM5120_MACH_BR_61X4WG=y +CONFIG_ADM5120_MACH_CAS_771=y +CONFIG_ADM5120_MACH_EASY5120P_ATA=y +CONFIG_ADM5120_MACH_EASY5120_RT=y +CONFIG_ADM5120_MACH_EASY5120_WVOIP=y +CONFIG_ADM5120_MACH_EASY83000=y +CONFIG_ADM5120_MACH_NFS_101=y +CONFIG_ADM5120_MACH_NP27G=y +CONFIG_ADM5120_MACH_NP28G=y +CONFIG_ADM5120_MACH_PMUGW=y +CONFIG_ADM5120_MACH_RB_11X=y +CONFIG_ADM5120_MACH_RB_133=y +CONFIG_ADM5120_MACH_RB_133C=y +CONFIG_ADM5120_MACH_RB_150=y +CONFIG_ADM5120_MACH_RB_153=y +CONFIG_ADM5120_MACH_RB_192=y +CONFIG_ADM5120_MACH_WP54=y +CONFIG_ADM5120_OEM_CELLVISION=y +CONFIG_ADM5120_OEM_COMPEX=y +CONFIG_ADM5120_OEM_EDIMAX=y +CONFIG_ADM5120_OEM_INFINEON=y +CONFIG_ADM5120_OEM_MIKROTIK=y +CONFIG_ADM5120_OEM_MOTOROLA=y +# CONFIG_ADM5120_OEM_ZYXEL is not set +CONFIG_ADM5120_SOC_BGA=y +CONFIG_ADM5120_WDT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_AMBA=y +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_ATA_PIIX is not set +CONFIG_ATA_SFF=y +# CONFIG_ATM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BCM47XX is not set +CONFIG_BITREVERSE=y +CONFIG_BRIDGE=m +# CONFIG_BT is not set +CONFIG_CEVT_R4K=y +CONFIG_CIFS_DEBUG2=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CLASSIC_RCU=y +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit" +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CSRC_R4K=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ELF_CORE=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_FIRMWARE_IN_KERNEL=y +# CONFIG_FREEZER is not set +CONFIG_FS_MBCACHE=m +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_ACL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HAMRADIO is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IDE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HID=m +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_COMPAT=y +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +CONFIG_HID_PETALYNX=m +# CONFIG_HID_PID is not set +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_PCI=m +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IDE is not set +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_INPUT=m +# CONFIG_INPUT_EVDEV is not set +CONFIG_IPV6_MIP6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IRQ_CPU=y +# CONFIG_ISDN is not set +# CONFIG_JOLIET is not set +CONFIG_KEXEC=y +CONFIG_KMOD=y +# CONFIG_LEDS_ALIX is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEMOTE_FULONG is not set +CONFIG_LLC=m +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_EMMA is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_TMIO is not set +CONFIG_MII=m +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_MINIX_FS is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_ADM5120=y +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MTD_TRXSPLIT=y +# CONFIG_NATSEMI is not set +# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set +# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set +# CONFIG_NET_PKTGEN is not set +CONFIG_NF_CT_ACCT=y +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NO_HZ=y +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PANTHERLORD_FF is not set +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PATA_PLATFORM is not set +CONFIG_PATA_RB153_CF=m +# CONFIG_PATA_SCH is not set +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROM_EMU is not set +# CONFIG_R6040 is not set +CONFIG_RFKILL_LEDS=y +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIO=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SND_MIPS=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SSB_POSSIBLE=y +CONFIG_STP=m +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TC35815 is not set +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_TICK_ONESHOT=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB=m +CONFIG_USB_ADM5120_HCD=m +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIA_RHINE is not set +CONFIG_VIDEO_MEDIA=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VLAN_8021Q=m +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_YAFFS_9BYTE_TAGS=y +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_YAFFS_YAFFS1=y +CONFIG_YAFFS_YAFFS2=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_ZONE_DMA_FLAG=0