brcm47xx: Fix boot problem with wgt634u.

Readd the workarround from the old version again which was removed in r22296 and refresh the patches.

This should close #7874

Thank you Russell Senior for testing.

SVN-Revision: 23911
owl
Hauke Mehrtens 2010-11-07 13:44:48 +00:00
parent c5711cadd3
commit 4e797b6278
18 changed files with 953 additions and 38 deletions

View File

@ -0,0 +1,305 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -21,6 +21,8 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
static char nvram_buf[NVRAM_SPACE];
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
@@ -33,6 +35,25 @@ static void __init early_nvram_init(void
base = mcore->flash_window;
lim = mcore->flash_window_size;
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return;
+ }
+ }
off = FLASH_MIN;
while (off <= lim) {
@@ -74,6 +95,12 @@ int nvram_getenv(char *name, char *val,
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ snprintf(val, val_len, "%s", value);
+ return 0;
+ }
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;
@@ -103,6 +130,9 @@ char *nvram_get(const char *name)
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env)
+ return cfe_env_get(nvram_buf, name);
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;

View File

@ -7,9 +7,9 @@
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s

View File

@ -15,7 +15,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -69,7 +69,7 @@ int nvram_getenv(char *name, char *val,
@@ -69,7 +69,7 @@ int nvram_getenv(char *name, char *val,
char *var, *value, *end, *eq;
if (!name)
@ -24,7 +24,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
if (!nvram_buf[0])
early_nvram_init();
@@ -89,6 +89,6 @@ int nvram_getenv(char *name, char *val,
@@ -89,6 +89,6 @@ int nvram_getenv(char *name, char *val,
return 0;
}
}

View File

@ -1,6 +1,6 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
udelay(10);
}
if (i == timeout) {

View File

@ -8,7 +8,7 @@
#include <asm/io.h>
extern void build_clear_page(void);
@@ -78,13 +79,16 @@ static inline void clear_user_page(void
@@ -78,13 +79,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}

View File

@ -1,7 +1,7 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val,
return -1;
@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val,
return NVRAM_ERR_ENVNOTFOUND;
}
EXPORT_SYMBOL(nvram_getenv);
+

View File

@ -8,7 +8,7 @@
#include <net/checksum.h>
#include <net/ip.h>
@@ -494,8 +495,9 @@ static void _tw32_flush(struct tg3 *tp,
@@ -494,8 +495,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
@ -61,7 +61,7 @@
{
u32 frame_val;
unsigned int loops;
@@ -872,7 +879,7 @@ static int tg3_writephy(struct tg3 *tp,
@@ -872,7 +879,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
@ -70,7 +70,7 @@
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -905,6 +912,11 @@ static int tg3_writephy(struct tg3 *tp,
@@ -905,6 +912,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
@ -147,7 +147,7 @@
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -7179,9 +7217,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
@@ -7179,9 +7217,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
@ -175,7 +175,7 @@
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
@@ -7302,6 +7348,11 @@ static int tg3_load_tso_firmware(struct
@@ -7302,6 +7348,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
@ -242,7 +242,7 @@
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -11855,6 +11922,9 @@ static int tg3_nvram_write_block(struct
@@ -11855,6 +11922,9 @@ static int tg3_nvram_write_block(struct
{
int ret;

View File

@ -0,0 +1,305 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -21,6 +21,8 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
static char nvram_buf[NVRAM_SPACE];
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
@@ -33,6 +35,25 @@ static void __init early_nvram_init(void
base = mcore->flash_window;
lim = mcore->flash_window_size;
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return;
+ }
+ }
off = FLASH_MIN;
while (off <= lim) {
@@ -74,6 +95,12 @@ int nvram_getenv(char *name, char *val,
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ snprintf(val, val_len, "%s", value);
+ return 0;
+ }
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;
@@ -103,6 +130,9 @@ char *nvram_get(const char *name)
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env)
+ return cfe_env_get(nvram_buf, name);
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;

View File

@ -28,7 +28,7 @@
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1259,6 +1266,15 @@ static int __devinit yenta_probe(struct
@@ -1259,6 +1266,15 @@ static int __devinit yenta_probe(struct
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));

View File

@ -7,9 +7,9 @@
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s

View File

@ -16,7 +16,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -76,7 +76,6 @@ config BCM47XX
@@ -77,7 +77,6 @@ config BCM47XX
select SSB_B43_PCI_BRIDGE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO

View File

@ -1,6 +1,6 @@
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
udelay(10);
}
if (i == timeout) {

View File

@ -8,7 +8,7 @@
#include <asm/io.h>
extern void build_clear_page(void);
@@ -78,13 +79,16 @@ static inline void clear_user_page(void
@@ -78,13 +79,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}

View File

@ -1,6 +1,6 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val,
@@ -92,3 +92,30 @@ int nvram_getenv(char *name, char *val,
return NVRAM_ERR_ENVNOTFOUND;
}
EXPORT_SYMBOL(nvram_getenv);

View File

@ -8,7 +8,7 @@
#include <net/checksum.h>
#include <net/ip.h>
@@ -494,8 +495,9 @@ static void _tw32_flush(struct tg3 *tp,
@@ -494,8 +495,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
@ -61,7 +61,7 @@
{
u32 frame_val;
unsigned int loops;
@@ -889,7 +896,7 @@ static int tg3_writephy(struct tg3 *tp,
@@ -889,7 +896,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
@ -70,7 +70,7 @@
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -922,6 +929,11 @@ static int tg3_writephy(struct tg3 *tp,
@@ -922,6 +929,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
@ -147,7 +147,7 @@
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -7202,9 +7240,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
@@ -7202,9 +7240,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
@ -175,7 +175,7 @@
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
@@ -7325,6 +7371,11 @@ static int tg3_load_tso_firmware(struct
@@ -7325,6 +7371,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
@ -199,7 +199,7 @@
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
@@ -10131,6 +10187,11 @@ static int tg3_test_nvram(struct tg3 *tp
@@ -10133,6 +10189,11 @@ static int tg3_test_nvram(struct tg3 *tp
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
return 0;
@ -211,7 +211,7 @@
if (tg3_nvram_read(tp, 0, &magic) != 0)
return -EIO;
@@ -10951,7 +11012,7 @@ static int tg3_ioctl(struct net_device *
@@ -10953,7 +11014,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
@ -220,7 +220,7 @@
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
@@ -10967,7 +11028,7 @@ static int tg3_ioctl(struct net_device *
@@ -10969,7 +11030,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
@ -229,7 +229,7 @@
spin_unlock_bh(&tp->lock);
return err;
@@ -11612,6 +11673,12 @@ static void __devinit tg3_get_5717_nvram
@@ -11614,6 +11675,12 @@ static void __devinit tg3_get_5717_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
@ -242,7 +242,7 @@
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -11875,6 +11942,9 @@ static int tg3_nvram_write_block(struct
@@ -11877,6 +11944,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
@ -252,7 +252,7 @@
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -13267,6 +13337,11 @@ static int __devinit tg3_get_invariants(
@@ -13269,6 +13339,11 @@ static int __devinit tg3_get_invariants(
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
@ -264,7 +264,7 @@
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
@@ -13665,6 +13740,10 @@ static int __devinit tg3_get_device_addr
@@ -13667,6 +13742,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
@ -275,7 +275,7 @@
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
@@ -14181,6 +14260,7 @@ static char * __devinit tg3_phy_string(s
@@ -14183,6 +14262,7 @@ static char * __devinit tg3_phy_string(s
case TG3_PHY_ID_BCM5704: return "5704";
case TG3_PHY_ID_BCM5705: return "5705";
case TG3_PHY_ID_BCM5750: return "5750";
@ -283,7 +283,7 @@
case TG3_PHY_ID_BCM5752: return "5752";
case TG3_PHY_ID_BCM5714: return "5714";
case TG3_PHY_ID_BCM5780: return "5780";
@@ -14392,6 +14472,13 @@ static int __devinit tg3_init_one(struct
@@ -14394,6 +14474,13 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;

View File

@ -0,0 +1,305 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -21,6 +21,8 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
static char nvram_buf[NVRAM_SPACE];
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
@@ -33,6 +35,25 @@ static void __init early_nvram_init(void
base = mcore->flash_window;
lim = mcore->flash_window_size;
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return;
+ }
+ }
off = FLASH_MIN;
while (off <= lim) {
@@ -74,6 +95,12 @@ int nvram_getenv(char *name, char *val,
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ snprintf(val, val_len, "%s", value);
+ return 0;
+ }
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;
@@ -103,6 +130,9 @@ char *nvram_get(const char *name)
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env)
+ return cfe_env_get(nvram_buf, name);
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;

View File

@ -28,7 +28,7 @@
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1258,6 +1265,15 @@ static int __devinit yenta_probe(struct
@@ -1258,6 +1265,15 @@ static int __devinit yenta_probe(struct
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));

View File

@ -7,9 +7,9 @@
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
/* Probe for NVRAM header */
static void __init early_nvram_init(void)
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s