mirror of https://github.com/hak5/openwrt-owl.git
ramips: board support for Asus RT-N10+
[juhosg: fix indentation in platform scripts, and remove debug messages from 06_set_iface_mac] Signed-off-by: Patrick van Staveren <trick@vanstaveren.us> SVN-Revision: 30808owl
Gabor Juhos
parent
8533636d2d
commit
44c8b396f9
|
|
@ -66,6 +66,9 @@ get_status_led() {
|
|||
rt-n15)
|
||||
status_led="rt-n15:blue:power"
|
||||
;;
|
||||
rt-n10-plus)
|
||||
status_led="asus:green:wps"
|
||||
;;
|
||||
rt-n56u)
|
||||
status_led="asus:blue:power"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ case "$FIRMWARE" in
|
|||
rt2x00_eeprom_extract "devdata" 16384 272
|
||||
;;
|
||||
|
||||
rt-n10-plus | \
|
||||
rt-g32-b1)
|
||||
rt2x00_eeprom_extract "devconf" 0 272
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -36,6 +36,10 @@ preinit_set_mac_address() {
|
|||
mac=$(ramips_get_mac_binary board-nvram 65440)
|
||||
ifconfig eth0 hw ether $mac 2>/dev/null
|
||||
;;
|
||||
rt-n10-plus)
|
||||
mac=$(ramips_get_mac_binary devconf 4)
|
||||
ifconfig eth0 hw ether $mac 2>/dev/null
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -98,6 +98,9 @@ ramips_board_name() {
|
|||
*"RT-G32 B1")
|
||||
name="rt-g32-b1"
|
||||
;;
|
||||
*"RT-N10+")
|
||||
name="rt-n10-plus"
|
||||
;;
|
||||
*"RT-N15")
|
||||
name="rt-n15"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@ platform_check_image() {
|
|||
nw718 | \
|
||||
omni-emb | \
|
||||
rt-g32-b1 | \
|
||||
rt-n10-plus | \
|
||||
rt-n15 | \
|
||||
rt-n56u | \
|
||||
sl-r7205 | \
|
||||
|
|
|
|||
|
|
@ -26,6 +26,7 @@ enum ramips_mach_type {
|
|||
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
|
||||
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
|
||||
RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
|
||||
RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */
|
||||
RAMIPS_MACH_NW718, /* Netcore NW718 */
|
||||
|
||||
/* RT3052 based machines */
|
||||
|
|
|
|||
|
|
@ -26,6 +26,11 @@ config RT305X_MACH_RT_G32_REVB
|
|||
bool "Asus RT-G32 revB board support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
|
||||
config RT305X_MACH_RT_N10_PLUS
|
||||
bool "Asus RT-N10+ board support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT305X_MACH_HW550_3G
|
||||
bool "Aztech HW550-3G support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
|
|
|
|||
|
|
@ -25,6 +25,7 @@ obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
|
|||
obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
|
||||
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
|
||||
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
|
||||
obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o
|
||||
obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o
|
||||
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
|
||||
obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,74 @@
|
|||
/*
|
||||
* ASUS RT-N10+ board support
|
||||
*
|
||||
* Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/mach-ralink/machine.h>
|
||||
#include <asm/mach-ralink/dev-gpio-buttons.h>
|
||||
#include <asm/mach-ralink/dev-gpio-leds.h>
|
||||
#include <asm/mach-ralink/rt305x.h>
|
||||
#include <asm/mach-ralink/rt305x_regs.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
#define RT_N10_PLUS_GPIO_LED_WPS 14
|
||||
|
||||
#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */
|
||||
#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */
|
||||
|
||||
#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20
|
||||
#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL)
|
||||
|
||||
static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "asus:green:wps",
|
||||
.gpio = RT_N10_PLUS_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = RT_N10_PLUS_GPIO_BUTTON_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = RT_N10_PLUS_GPIO_BUTTON_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init rt_n10_plus_init(void)
|
||||
{
|
||||
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
|
||||
|
||||
rt305x_register_flash(0);
|
||||
|
||||
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
|
||||
rt305x_register_ethernet();
|
||||
ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio),
|
||||
rt_n10_plus_leds_gpio);
|
||||
ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(rt_n10_plus_gpio_buttons),
|
||||
rt_n10_plus_gpio_buttons);
|
||||
rt305x_register_wifi();
|
||||
rt305x_register_wdt();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+",
|
||||
rt_n10_plus_init);
|
||||
|
|
@ -205,6 +205,13 @@ define BuildFirmware/RTG32B1
|
|||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
|
||||
endef
|
||||
|
||||
mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
|
||||
mtd_rtn10plus_kernel_part_size=917504
|
||||
mtd_rtn10plus_rootfs_part_size=2949120
|
||||
define BuildFirmware/RTN10PLUS
|
||||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
|
||||
endef
|
||||
|
||||
mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
|
||||
define BuildFirmware/WHRG300N
|
||||
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
|
||||
|
|
@ -343,6 +350,10 @@ define Image/Build/Profile/RTG32B1
|
|||
$(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/RTN10PLUS
|
||||
$(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/SLR7205
|
||||
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
|
||||
endef
|
||||
|
|
@ -388,6 +399,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/DIR300B1,$(1))
|
||||
$(call Image/Build/Profile/ESR9753,$(1))
|
||||
$(call Image/Build/Profile/F5D8235V2,$(1))
|
||||
$(call Image/Build/Profile/RTN10PLUS,$(1))
|
||||
$(call Image/Build/Profile/FONERA20N,$(1))
|
||||
$(call Image/Build/Profile/HW5503G,$(1))
|
||||
$(call Image/Build/Profile/MOFI35003GN,$(1))
|
||||
|
|
|
|||
|
|
@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_NW718=y
|
|||
CONFIG_RT305X_MACH_OMNI_EMB=y
|
||||
CONFIG_RT305X_MACH_PWH2004=y
|
||||
CONFIG_RT305X_MACH_RT_G32_REVB=y
|
||||
CONFIG_RT305X_MACH_RT_N10_PLUS=y
|
||||
CONFIG_RT305X_MACH_SL_R7205=y
|
||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
||||
CONFIG_RT305X_MACH_W502U=y
|
||||
|
|
|
|||
Loading…
Reference in New Issue