diff --git a/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt b/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt
new file mode 100644
index 0000000000..20e1c95e1b
--- /dev/null
+++ b/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt
@@ -0,0 +1,95 @@
+CPU revision is: 00024000
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005
+Determined physical RAM map:
+memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4710 rev 0 at 125 MHz
+Using 62.400 MHz high precision timer.
+!unable to setup serial console!
+Calibrating delay loop... 82.94 BogoMIPS
+Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Fixing up bus 0
+PCI: Fixing up bridge
+PCI: Setting latency timer of device 01:00.0 to 64
+PCI: Fixing up bus 1
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Amd/Fujitsu Extended Query Table v1.0 at 0x0040
+Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table.
+Physically mapped flash: Swapping erase regions for broken CFI table.
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1fc00000
+Physically mapped flash: squashfs filesystem found at block 946
+Creating 5 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000ec990-0x001ceb48 : "rootfs"
+mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
+0x003f0000-0x00400000 : "nvram"
+0x001d0000-0x003f0000 : "OpenWrt"
+sflash: chipcommon not found
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (squashfs filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 100k freed
+Warning: unable to open an initial console.
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 0000041a
+using v1 hardware
+led -> 00
+led -> 01
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:08.0 to 64
+5325E   phy=FFFFFFFF
+eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 01:02.0 to 64
+PCI: Enabling device 01:02.0 (0004 -> 0006)
+eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+device eth2 entered promiscuous mode
+eth2: attempt to add interface with same source address.
+br0: port 2(eth2) entering learning state
+br0: port 1(eth0) entering learning state
+br0: port 2(eth2) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(eth0) entering forwarding state
+br0: topology change detected, propagating
+led -> 00